-
Design and construction of the POLAR detector
Authors:
N. Produit,
T. W. Bao,
T. Batsch,
T. Bernasconi,
I. Britvich,
F. Cadoux,
I. Cernuda,
J. Y. Chai,
Y. W. Dong,
N. Gauvin,
W. Hajdas,
M. Kole,
M. N. Kong,
R. Kramert,
L. Li,
J. T. Liu,
X. Liu,
R. Marcinkowski,
S. Orsi,
M. Pohl,
D. Rapin,
D. Rybka,
A. Rutczynska,
H. L. Shi,
P. Socha
, et al. (13 additional authors not shown)
Abstract:
The POLAR detector is a space based Gamma Ray Burst (GRB) polarimeter with a wide field of view, which covers almost half the sky. The instrument uses Compton scattering of gamma rays on a plastic scintillator hodoscope to measure the polarization of the incoming photons. The instrument has been successfully launched on board of the Chinese space laboratory Tiangong~2 on September 15, 2016. The co…
▽ More
The POLAR detector is a space based Gamma Ray Burst (GRB) polarimeter with a wide field of view, which covers almost half the sky. The instrument uses Compton scattering of gamma rays on a plastic scintillator hodoscope to measure the polarization of the incoming photons. The instrument has been successfully launched on board of the Chinese space laboratory Tiangong~2 on September 15, 2016. The construction of the instrument components is described in this article. Details are provided on problems encountered during the construction phase and their solutions. Initial performance of the instrument in orbit is as expected from ground tests and Monte Carlo simulation.
△ Less
Submitted 28 September, 2017; v1 submitted 21 September, 2017;
originally announced September 2017.
-
Calibration of the Space-borne Compton Polarimeter POLAR flight model with 100% polarized X-ray beams
Authors:
H. L. Xiao,
W. Hajdas,
P. Socha,
R. Marcinkowski,
B. B. Wu,
T. W. Bao,
J. Y. Chai,
Y. W. Dong,
M. N. Kong,
L. Li,
Z. H. Li,
J. T. Liu,
H. L. Shi,
L. M. Song,
J. C. Sun,
R. J. Wang,
Y. H. Wang,
X. Wen,
S. L. Xiong,
J. Zhang,
L. Y. Zhang,
S. N. Zhang,
X. F. Zhang,
Y. J. Zhang,
F. Cadoux
, et al. (10 additional authors not shown)
Abstract:
POLAR is space-borne detector designed for a precise measurement of gamma-ray polarization of the prompt emissions of Gamma-Ray Bursts in the energy range 50 keV - 500 keV. POLAR is a compact Compton polarimeter consisting of 40$\times$ 40 plastic scintillator bars read out by 25 multi-anode PMTs. In May 2015, we performed a series of tests of the POLAR flight model with 100\% polarized x-rays bea…
▽ More
POLAR is space-borne detector designed for a precise measurement of gamma-ray polarization of the prompt emissions of Gamma-Ray Bursts in the energy range 50 keV - 500 keV. POLAR is a compact Compton polarimeter consisting of 40$\times$ 40 plastic scintillator bars read out by 25 multi-anode PMTs. In May 2015, we performed a series of tests of the POLAR flight model with 100\% polarized x-rays beams at the European Synchrotron Radiation Facility beam-line ID11 aming to study thresholds, crosstalk between channels and responses of POLAR flight model to polarized X-ray beams. In this paper we present the data analysis method and some analysis results. According the results, POLAR FM has good polarimetric capabilities.
△ Less
Submitted 24 April, 2017; v1 submitted 20 April, 2017;
originally announced April 2017.
-
Gain factor and parameter settings optimization of the new gamma-ray burst polarimeter POLAR
Authors:
X. F. Zhang,
W. Hajdas,
H. L. Xiao,
X. Wen,
B. B. Wu,
T. W. Bao,
T. Batsch,
T. Bernasconi,
F. Cadoux,
I. Cernuda,
J. Y. Chai,
Y. W. Dong,
N. Gauvin,
J. J. He,
M. Kole,
M. N. Kong,
C. Lechanoine-Leluc,
L. Li,
Z. H. Li,
J. T. Liu,
X. Liu,
R. Marcinkowski,
S. Orsi,
M. Pohl,
D. Rapin
, et al. (16 additional authors not shown)
Abstract:
As a space-borne detector POLAR is designed to conduct hard X-ray polarization measurements of gamma-ray bursts on the statistically significant sample of events and with an unprecedented accuracy. During its development phase a number of tests, calibrations runs and verification measurements were carried out in order to validate instrument functionality and optimize operational parameters. In thi…
▽ More
As a space-borne detector POLAR is designed to conduct hard X-ray polarization measurements of gamma-ray bursts on the statistically significant sample of events and with an unprecedented accuracy. During its development phase a number of tests, calibrations runs and verification measurements were carried out in order to validate instrument functionality and optimize operational parameters. In this article we present results on gain optimization togeter with verification data obtained in the course of broad laboratory and environmental tests. In particular we focus on exposures to the $^{137}$Cs radioactive source and determination of the gain dependence on the high voltage for all 1600 detection channels of the polarimeter. Performance of the instrument is described in detail with respect to the dynamic range, energy resolution and temperature dependence. Gain optimization algorithms and response non-uniformity studies are also broadly discussed. Results presented below constitute important parts for development of the POLAR calibration and operation database.
△ Less
Submitted 14 March, 2017; v1 submitted 12 March, 2017;
originally announced March 2017.
-
POLAR: Final Calibration and In-Flight Performance of a Dedicated GRB Polarimeter
Authors:
M. Kole,
T. W. Bao,
T. Batsch,
T. Bernasconi,
F. Cadoux,
J. Y. Chai,
Y. W. Dong,
N. Gauvin,
W. Hajdas,
J. J. He,
M. N. Kong,
S. W. Kong,
C. Lechanoine-Leluc,
L. Li,
Z. H. Li,
J. T. Liu,
X. Liu,
R. Marcinkowski,
S. Orsi,
M. Pohl,
N. Produit,
D. Rapin,
A. Rutczynska,
D. Rybka,
H. L. Shi
, et al. (19 additional authors not shown)
Abstract:
Gamma-ray polarimetry is a new powerful tool to study the processes responsible for the emission from astrophysical sources and the environments in which this emission takes place. Few successful polarimetric measurements have however been performed thus far in the gamma-ray energy band due to the difficulties involved. POLAR is a dedicated polarimeter designed to perform high precision measuremen…
▽ More
Gamma-ray polarimetry is a new powerful tool to study the processes responsible for the emission from astrophysical sources and the environments in which this emission takes place. Few successful polarimetric measurements have however been performed thus far in the gamma-ray energy band due to the difficulties involved. POLAR is a dedicated polarimeter designed to perform high precision measurements of the polarization of the emission from gamma-ray burst in the 50-500 keV energy range. This new polarimeter is expected to detect approximately 50 gamma-ray bursts per year while performing high precision polarization measurements on approximately 10 bursts per year. The instrument was launched into lower earth orbit as part of the second Chinese space lab, the Tiangong-2, on September 15th 2016 and has been taking data successfully since being switched on one week after. The instrument uses a segmented scintillator array consisting of 1600 plastic scintillator bars, read out by 25 flat-panel multi-anode photomultipliers, to measure the Compton scattering angles of incoming photons. The small segmentation and relatively large uniform effective area allow the instrument to measure the polarization of a large number of transient events, such as gamma-ray bursts, with an unprecedented precision during its two year life-time. The final flight model underwent detailed calibration prior to launch as well as intensive space qualification tests, a summary of which will be presented in this paper. The instrument design will be discussed first followed by an overview of the on-ground tests, finally the in-orbit behavior as measured during the first weeks of the mission will be presented.
△ Less
Submitted 13 December, 2016;
originally announced December 2016.
-
Calibration of Gamma-ray Burst Polarimeter POLAR
Authors:
H. L. Xiao,
W. Hajdas,
T. W. Bao,
T. Batsch,
T. Bernasconi,
I. Cernuda,
J. Y. Chai,
Y. W. Dong,
N. Gauvin,
M. Kole,
M. N. Kong,
S. W. Kong,
L. Li,
J. T. Liu,
X. Liu,
R. Marcinkowski,
S. Orsi,
M. Pohl,
N. Produit,
D. Rapin,
A. Rutczynska,
D. Rybka,
H. L. Shi,
L. M. Song,
J. C. Sun
, et al. (11 additional authors not shown)
Abstract:
Gamma Ray Bursts (GRBs) are the strongest explosions in the universe which might be associated with creation of black holes. Magnetic field structure and burst dynamics may influence polarization of the emitted gamma-rays. Precise polarization detection can be an ultimate tool to unveil the true GRB mechanism. POLAR is a space-borne Compton scattering detector for precise measurements of the GRB p…
▽ More
Gamma Ray Bursts (GRBs) are the strongest explosions in the universe which might be associated with creation of black holes. Magnetic field structure and burst dynamics may influence polarization of the emitted gamma-rays. Precise polarization detection can be an ultimate tool to unveil the true GRB mechanism. POLAR is a space-borne Compton scattering detector for precise measurements of the GRB polarization. It consists of a 40$\times$40 array of plastic scintillator bars read out by 25 multi-anode PMTs (MaPMTs). It is scheduled to be launched into space in 2016 onboard of the Chinese space laboratory TG2. We present a dedicated methodology for POLAR calibration and some calibration results based on the combined use of the laboratory radioactive sources and polarized X-ray beams from the European Synchrotron Radiation Facility. They include calibration of the energy response, computation of the energy conversion factor vs. high voltage as well as determination of the threshold values, crosstalk contributions and polarization modulation factors.
△ Less
Submitted 9 December, 2015;
originally announced December 2015.
-
Phase separation and stripe patterns in K0.8Fe1.6+xSe2 superconductors
Authors:
Z. W. Wang,
Z. Wang,
Y. J. Song,
C. Ma,
H. L. Shi,
Z. Chen,
H. F. Tian,
H. X. Yang,
G. F. Chen,
J. Q. Li
Abstract:
Structural investigations on the K0.8Fe1.6+xSe2 superconducting materials have revealed remarkable micro-stripes arising evidently from the phase separation. Two coexisted structural phases can be characterized by modulations of q1 = 1/5[a*+3b*], the antiferromagnetic phase K0.8Fe1.6Se2, and q2 = 1/2[a*+b*], the superconducting phase K0.75Fe2Se2, respectively. These stripe patterns likely result f…
▽ More
Structural investigations on the K0.8Fe1.6+xSe2 superconducting materials have revealed remarkable micro-stripes arising evidently from the phase separation. Two coexisted structural phases can be characterized by modulations of q1 = 1/5[a*+3b*], the antiferromagnetic phase K0.8Fe1.6Se2, and q2 = 1/2[a*+b*], the superconducting phase K0.75Fe2Se2, respectively. These stripe patterns likely result from the anisotropic assembly of superconducting particles along the [110] and [1-10] direction. In addition to the notable stripe structures, a nano-scale phase separation also appears in present superconducting system as clearly observed by high-resolution transmission electron microscopy. Certain notable experimental data obtained in this heterogenous system can be quantitatively explained by the percolation scenario.
△ Less
Submitted 20 April, 2012;
originally announced April 2012.
-
Collapse of the Fe-vacancy order and successive phase transitions in superconducting KxFe2-ySe2 (0.7 \leg x \leg 0.8, 0.2 \leg y \leg 0.3)
Authors:
J. Q. Li,
Y. J. Song,
H. X. Yang,
Z. Wang,
H. L. Shi,
G. F. Chen,
Z. W. Wang,
Z. Chen,
H. F. Tian
Abstract:
The Fe-based superconducting KxFe2-ySe2 (0.6 {\leg} x {\leg} 1, 0.2{\leg} y {\leg} 0.4) compounds, unlike the well-known RFe2As2 (R = Ba, Sr, Ca) superconductors, contain complex structural features and notable physical properties, such as the Fe-vacancy ordering, multi-superconducting transitions and the phase separation[1]. Recent experimental studies also suggested the presence of remarkable in…
▽ More
The Fe-based superconducting KxFe2-ySe2 (0.6 {\leg} x {\leg} 1, 0.2{\leg} y {\leg} 0.4) compounds, unlike the well-known RFe2As2 (R = Ba, Sr, Ca) superconductors, contain complex structural features and notable physical properties, such as the Fe-vacancy ordering, multi-superconducting transitions and the phase separation[1]. Recent experimental studies also suggested the presence of remarkable interplay among the Fe-vacancy order and the antiferromagnetic structure[2]. Here we demonstrate that the well-characterized superconducting KxFe2-ySe2 (0.6 {\leg} x {\leg} 0.8, 0.2 {\leg} x {\leg} 0.3) samples contain complex microstructure features and undergo successive phase transitions at low temperatures. In-situ TEM observations on a number of the KxFe2-ySe2 superconductors demonstrated the presence of a remarkable collapse of the Fe-vacancy order above the superconducting transition, as a result, the superconducting phase actually adopts a tetragonal structure without the Fe-vacancy ordering. Moreover, our analysis at the low temperatures suggests that the superconductors likely adopt a Fe-deficient structure with composition of K0.75Fe2-ySe2. These results are important not only for the further optimization of superconducting phase in present system but also for understanding the mechanism of the Fe-based superconductivity.
△ Less
Submitted 28 April, 2011;
originally announced April 2011.
-
Phase transition, superstructure and physical properties of K2Fe4Se5
Authors:
Y. J. Song,
Z. Wang,
Z. W. Wang,
H. L. Shi,
Z. Chen,
H. F. Tian,
G. F. Chen,
H. X. Yang,
J. Q. Li
Abstract:
The structural features and physical properties of the antiferromagnetic K0.8Fe1.6Se2 (so called K2Fe4Se5 phase) have been studied in the temperature range from 300K up to 600K. Resistivity measurements on both single crystal and polycrystalline samples reveal a semiconducting behavior. Structural investigations of K2Fe4Se5 by means of transmission electron microscopy and powder x-ray diffraction…
▽ More
The structural features and physical properties of the antiferromagnetic K0.8Fe1.6Se2 (so called K2Fe4Se5 phase) have been studied in the temperature range from 300K up to 600K. Resistivity measurements on both single crystal and polycrystalline samples reveal a semiconducting behavior. Structural investigations of K2Fe4Se5 by means of transmission electron microscopy and powder x-ray diffraction demonstrate the presence of a well-defined superstructure within the a-b plane originating from a Fe-vacancy order along the [130] direction. Moreover, in-situ heating structural analysis shows that K0.8Fe1.6Se2 undergoes a transition of the Fe-vacancy order to disorder at about 600K. The phase separation and the Fe-vacancy ordering in the superconducting materials of KxFe2-ySe2 (0.2 \leq y \leq 0.3) has been briefly discussed.
△ Less
Submitted 26 April, 2011;
originally announced April 2011.
-
Synthesis, Structure and Magnetic Properties of New Layered Iron-Oxychalcogenide Na2Fe2OSe2
Authors:
J. B. He,
D. M. Wang,
H. L. Shi,
H. X. Yang,
J. Q. Li,
G. F. Chen
Abstract:
A new layered iron-oxychalcogenide Na2Fe2OSe2 has been synthesized and structurally characterized by powder X-ray diffraction. The structure is formed by alternate stacking of the newly discovered [Fe2OSe2] blocks and double layers of Na. Conductivity study shows that Na2Fe2OSe2 is a semiconductor with activation energy of 0.26 eV. Magnetic susceptibility and heat capacity measurements reveal an a…
▽ More
A new layered iron-oxychalcogenide Na2Fe2OSe2 has been synthesized and structurally characterized by powder X-ray diffraction. The structure is formed by alternate stacking of the newly discovered [Fe2OSe2] blocks and double layers of Na. Conductivity study shows that Na2Fe2OSe2 is a semiconductor with activation energy of 0.26 eV. Magnetic susceptibility and heat capacity measurements reveal an antiferromagnetic phase transition occurs at TN=73 K. A broad maximum of magnetic susceptibility and a slow decay of the specific heat above TN, arises as a result of two-dimensional short-range spin correlation.
△ Less
Submitted 26 April, 2011; v1 submitted 12 April, 2011;
originally announced April 2011.
-
Microstructure and Fe-vacancy ordering in the KFexSe2 superconducting system
Authors:
Z. Wang,
Y. J. Song,
H. L. Shi,
Z. W. Wang,
Z. Chen,
H. F. Tian,
G. F. Chen,
J. G. Guo,
H. X. Yang,
J. Q. Li
Abstract:
Structural investigations by means of transmission electron microscopy (TEM) on KFexSe2 with 1.5 \leq x \leq 1.8 have revealed a rich variety of microstructure phenomena, the KFe1.5Se2 crystal often shows a superstructure modulation along the [310] zone-axis direction, this superstructure can be well interpreted by the Fe-vacancy order within the a-b plane. Increase of Fe-concentration in the KFex…
▽ More
Structural investigations by means of transmission electron microscopy (TEM) on KFexSe2 with 1.5 \leq x \leq 1.8 have revealed a rich variety of microstructure phenomena, the KFe1.5Se2 crystal often shows a superstructure modulation along the [310] zone-axis direction, this superstructure can be well interpreted by the Fe-vacancy order within the a-b plane. Increase of Fe-concentration in the KFexSe2 materials could not only result in the appearance of superconductivity but also yield clear alternations of microstructure. Structural inhomogeneity, the complex superstructures and defect structures in the superconducting KFe1.8Se2 sample have been investigated based on the high-resolution TEM.
△ Less
Submitted 8 March, 2011; v1 submitted 11 January, 2011;
originally announced January 2011.
-
Structural properties and superconductivity of SrFe2As2-xPx and CaFe2As2-yPy
Authors:
H. L. Shi,
H. X. Yang,
H. F. Tian,
J. B. Lu,
Z. W. Wang,
Y. B. Qin,
Y. J. Song,
J. Q. Li*
Abstract:
The SrFe2As2-xPx and CaFe2As2-yPy materials were prepared by a solid state reaction method. X-ray diffraction measurements indicate the single-phase samples can be successfully obtained for SrFe2As2-xPx and CaFe2As2-yPy samples. Clear contraction of the lattice parameters are clearly determined due to the relatively smaller P ions substation for As. The SDW instability associated with tetragonal…
▽ More
The SrFe2As2-xPx and CaFe2As2-yPy materials were prepared by a solid state reaction method. X-ray diffraction measurements indicate the single-phase samples can be successfully obtained for SrFe2As2-xPx and CaFe2As2-yPy samples. Clear contraction of the lattice parameters are clearly determined due to the relatively smaller P ions substation for As. The SDW instability associated with tetragonal to orthorhombic phase transition is suppressed visibly in both systems following with the increase of P contents. The highest superconducting transitions are respectively observed at about 27 K in SrFe2As1.3P0.7 and at about 13 K in CaFe2As1.7P0.3.
△ Less
Submitted 25 September, 2009;
originally announced September 2009.
-
Phase separation and ferroelectric ordering in charge frustrated LuFe2O4-x
Authors:
H. X. Yang,
H. F. Tian,
Y. Zhang,
Y. B. Qin,
L. J. Zeng,
C. Ma,
H. L. Shi,
J. B. Lu,
J. Q. Li
Abstract:
The transmission electron microscopy observations of the charge ordering (CO) which governs the electronic polarization in LuFe2O4-x clearly show the presence of a remarkable phase separation at low temperatures. Two CO ground states are found to adopt the charge modulations of Q1 = (1/3, 1/3, 0) and Q2 = (1/3 + y, 1/3 + y, 3/2), respectively. Our structural study demonstrates that the incommens…
▽ More
The transmission electron microscopy observations of the charge ordering (CO) which governs the electronic polarization in LuFe2O4-x clearly show the presence of a remarkable phase separation at low temperatures. Two CO ground states are found to adopt the charge modulations of Q1 = (1/3, 1/3, 0) and Q2 = (1/3 + y, 1/3 + y, 3/2), respectively. Our structural study demonstrates that the incommensurately Q2-modulated state is chiefly stable in samples with relatively lower oxygen contents. Data from theoretical simulations of the diffraction suggest that both Q1- and Q2-modulated phases have ferroelectric ordering. The effects of oxygen concentration on the phase separation and electric polarization in this layered system are discussed.
△ Less
Submitted 8 September, 2009;
originally announced September 2009.
-
Structural features and tetragonal-orthorhombic phase transition in SrFe2As2 and CaFe2As2
Authors:
C. Ma,
H. X. Yang,
H. F. Tian,
H. L Shi,
J. B. Lu,
Z. W. Wang,
L. J. Zeng,
G. F. Chen,
N. L. Wang,
J. Q. Li
Abstract:
The structural properties of the SrFe2As2 and CaFe2As2 compounds have been extensively analyzed by transmission electron microscopy (TEM) from room temperature down to 20K. The experimental results demonstrate that the SrFe2As2 crystal, in consistence with previous x-ray data, has a tetragonal structure at room temperature and undergoes a tetragonal (T)-orthorhombic (O) phase transition at about…
▽ More
The structural properties of the SrFe2As2 and CaFe2As2 compounds have been extensively analyzed by transmission electron microscopy (TEM) from room temperature down to 20K. The experimental results demonstrate that the SrFe2As2 crystal, in consistence with previous x-ray data, has a tetragonal structure at room temperature and undergoes a tetragonal (T)-orthorhombic (O) phase transition at about 210K. Moreover, twinning lamella arising from T-O transition evidently appears in the orthorhombic phase. On the other hand, TEM observations of CaFe2As2 reveal the presence of a pseudo-periodic structural modulation with the periodicity of around 40nm at room temperature. This modulation is likely in connection with the local structural distortions within the Ca layer. In-situ cooling TEM observations of CaFe2As2 reveal the presence of complex domain structures in the low-temperature orthorhombic phase.
△ Less
Submitted 21 November, 2008; v1 submitted 20 November, 2008;
originally announced November 2008.
-
Structural properties, defects and structural phase transition in the ROFeM (R=La, Nd; M=As, P) materials
Authors:
C. Ma,
L. J. Zeng,
H. X. Yang,
H. L Shi,
R. C. Che,
C. Y. Liang,
Y. B. Qin,
G. F. Chen,
Z. A. Ren,
J. Q. Li
Abstract:
The structural properties of the ROFeM (R=La, Nd; M=As, P) materials have been analyzed by means of electron diffraction, high-resolution transmission-electron microscopy (TEM) and in-situ cooling TEM observations. The experimental results demonstrate that the layered ROFeM crystals often contain a variety of structural defects, such as stacking faults and small-angle boundaries. The in-situ TEM…
▽ More
The structural properties of the ROFeM (R=La, Nd; M=As, P) materials have been analyzed by means of electron diffraction, high-resolution transmission-electron microscopy (TEM) and in-situ cooling TEM observations. The experimental results demonstrate that the layered ROFeM crystals often contain a variety of structural defects, such as stacking faults and small-angle boundaries. The in-situ TEM investigations reveal that, in association with the remarkable spin-density-wave (SDW) instability near 150 K, complex structural transitions can be clearly observed in both crystal symmetry and local microstructure features.
△ Less
Submitted 19 June, 2008;
originally announced June 2008.