-
Open-source Framework for Transonic Boundary Layer Natural Transition Analysis over Complex Geometries in Nektar++
Authors:
Ganlin Lyu,
Chao Chen,
Xi Du,
Shahid Mughal,
Spencer J. Sherwin
Abstract:
We introduce an open-source and unified framework for transition analysis for laminar boundary layer natural transition at transonic conditions and over complex geometries, where surface irregularities may be present. Different computational tools are integrated in the framework, and therefore overcomes the difficulties of two separate and usually quite disparate processes when using $e^N$ method…
▽ More
We introduce an open-source and unified framework for transition analysis for laminar boundary layer natural transition at transonic conditions and over complex geometries, where surface irregularities may be present. Different computational tools are integrated in the framework, and therefore overcomes the difficulties of two separate and usually quite disparate processes when using $e^N$ method for transition analysis. To generate a baseflow with desired pressure distribution, appropriate pressure compatible inflow boundary condition needs to be developed and enforced. We first derive the system for 1D numerical stability analysis for boundary conditions, and construct three types of pressure compatible inflow. We demonstrate that the entropy-pressure compatible inflow is stable unlike other choices. Compared with the steady baseflow computation, the unsteady simulation for the disturbance field is more challenging for compressible flows because of complex wave reflections, which can easily contaminate the results. We therefore introduce the two main sources of wave decontamination and corresponding methods to obtain clean signal. The workflow within the framework is then verified by computing the disturbance development in 2D flat plate boundary layer flows at Mach $0.8$. The $N$-factors over a clean flat plate and a flat plate with a forward-facing step are generated, and agree well with the results from the reference. Following the verified workflow, We then analyze the disturbance growth on a wing section of the CRM-NLF model. The N-factor on a 2D simulation is generated and studied.
△ Less
Submitted 31 May, 2022;
originally announced May 2022.
-
Stable, entropy-pressure compatible subsonic Riemann boundary condition for embedded DG compressible flow simulations
Authors:
Ganlin Lyu,
Chao Chen,
Xi Du,
Spencer J. Sherwin
Abstract:
One approach to reduce the cost to simulate transitional compressible boundary layer flow is to adopt a near body reduced domain with boundary conditions enforced to be compatible with a computationally cheaper 3D RANS simulation. In such an approach it is desirable to enforce a consistent pressure distribution which is not typically the case when using the standard Riemann inflow boundary conditi…
▽ More
One approach to reduce the cost to simulate transitional compressible boundary layer flow is to adopt a near body reduced domain with boundary conditions enforced to be compatible with a computationally cheaper 3D RANS simulation. In such an approach it is desirable to enforce a consistent pressure distribution which is not typically the case when using the standard Riemann inflow boundary condition. We revisit the Riemann problem adopted in many DG based high fidelity formulations. Through analysis of the 1D linearised Euler equations it is demonstrated that maintaining entropy compatibility with the RANS simulation is important for a stable solution. The maintenance of Riemann invariant at outflow leaves one condition that can be imposed at the inflow. Therefore the entropy-pressure enforcement is the only stable boundary condition to enforce a known pressure distribution. We further demonstrate that all the entropy compatible inflow Riemann boundary conditions are stable providing the invariant compatible Riemann outflow boundary condition is also respected. Although the entropy-pressure compatible Riemann inflow boundary condition is stable from the 1D analysis, 2D tests highlight divergence in the inviscid problem and neutrally stable wiggles in the velocity fields in viscous simulations around the stagnation point. A 2D analysis about a non-uniform baseflow assumption provides insight into this stability issue (ill-posedness) and motivate the use of a mix of inflow boundary conditions in this region of the flow. As a validation we apply the proposed boundary conditions to a reduced domain of a wing section normal to the leading-edge of the CRM-NLF model taken out of a full 3D RANS simulation at Mach 0.86 and a Reynolds number of 8.5 million. The results show that the entropy-pressure compatible Riemann inflow boundary condition leads to a good agreement in pressure distribution.
△ Less
Submitted 27 May, 2022;
originally announced May 2022.
-
Industry-Relevant Implicit Large-Eddy Simulation of a High-Performance Road Car via Spectral/hp Element Methods
Authors:
Gianmarco Mengaldo,
David Moxey,
Michael Turner,
Rodrigo C. Moura,
Ayad Jassim,
Mark Taylor,
Joaquim Peiro,
Spencer J. Sherwin
Abstract:
We present a successful deployment of high-fidelity Large-Eddy Simulation (LES) technologies based on spectral/hp element methods to industrial flow problems, which are characterized by high Reynolds numbers and complex geometries. In particular, we describe the numerical methods, software development and steps that were required to perform the implicit LES of a real automotive car, namely the Ele…
▽ More
We present a successful deployment of high-fidelity Large-Eddy Simulation (LES) technologies based on spectral/hp element methods to industrial flow problems, which are characterized by high Reynolds numbers and complex geometries. In particular, we describe the numerical methods, software development and steps that were required to perform the implicit LES of a real automotive car, namely the Elemental Rp1 model. To the best of the authors' knowledge, this simulation represents the first fifth-order accurate transient LES of an entire real car geometry. Moreover, this constitutes a key milestone towards considerably expanding the computational design envelope currently allowed in industry, where steady-state modelling remains the standard. To this end, a number of novel developments had to be made in order to overcome obstacles in mesh generation and solver technology to achieve this simulation, which we detail in this paper. The main objective is to present to the industrial and applied mathematics community, a viable pathway to translate academic developments into industrial tools, that can substantially advance the analysis and design capabilities of high-end engineering stakeholders. The novel developments and results were achieved using the academic-driven open-source framework Nektar++.
△ Less
Submitted 30 May, 2021; v1 submitted 18 September, 2020;
originally announced September 2020.
-
Nektar++: Design and implementation of an implicit, spectral/$hp$ element, compressible flow solver using a Jacobian-free Newton Krylov approach
Authors:
Zhen-Guo Yan,
Yu Pan,
Giacomo Castiglioni,
Koen Hillewaert,
Joaquim Peiró,
David Moxey,
Spencer J. Sherwin
Abstract:
At high Reynolds numbers, the use of explicit in time compressible flow simulations with spectral/$hp$ element discretization can become significantly limited by time step. To alleviate this limitation we extend the capability of the spectral/$hp$ element open-source software framework, Nektar++, to include an implicit discontinuous Galerkin compressible flow solver. The integration in time is car…
▽ More
At high Reynolds numbers, the use of explicit in time compressible flow simulations with spectral/$hp$ element discretization can become significantly limited by time step. To alleviate this limitation we extend the capability of the spectral/$hp$ element open-source software framework, Nektar++, to include an implicit discontinuous Galerkin compressible flow solver. The integration in time is carried out by a singly diagonally implicit Runge-Kutta method. The non-linear system arising from the implicit time integration is iteratively solved by the Jacobian-free Newton Krylov (JFNK) method. A favorable feature of the JFNK approach is its extensive use of the explicit operators available from the previous explicit in time implementation. The functionalities of different building blocks of the implicit solver are analyzed from the point of view of software design and placed in appropriate hierarchical levels in the C++ libraries. In the detailed implementation, the contributions of different parts of the solver to computational cost, memory consumption, and programming complexity are also analyzed. A combination of analytical and numerical methods is adopted to simplify the programming complexity in forming the preconditioning matrix. The solver is verified and tested using cases such as manufactured compressible Poiseuille flow, Taylor-Green vortex, turbulent flow over a circular cylinder at $\text{Re}=3900$ and shock wave boundary-layer interaction. The results show that the implicit solver can speed-up the simulations while maintaining good simulation accuracy.
△ Less
Submitted 11 February, 2020;
originally announced February 2020.
-
Computational study on an Ahmed Body equipped with simplified underbody diffuser
Authors:
Filipe F. Buscariolo,
Gustavo R. S. Assi,
Spencer J. Sherwin
Abstract:
The Ahmed body is one of the most studied 3D bluff bodies used for automotive research and was first proposed by Ahmed in 1984. The variation of the slant angle of the rear upper surface on this body generates different flow behaviours, similar to a standard road vehicles. In this study we extend the geometrical variation to evaluate the influence of a rear underbody diffuser which are commonly ap…
▽ More
The Ahmed body is one of the most studied 3D bluff bodies used for automotive research and was first proposed by Ahmed in 1984. The variation of the slant angle of the rear upper surface on this body generates different flow behaviours, similar to a standard road vehicles. In this study we extend the geometrical variation to evaluate the influence of a rear underbody diffuser which are commonly applied in high performance and race cars to improve downforce. We perform parametric studies on the rear diffuser angle of two baseline configurations of the Ahmed body: the first with a 0 degree upper slant angle and the second with a 25 degrees slant angle. We employ a high-fidelity CFD simulation based on the spectral/hp element discretisation that combines classical mesh refinement with polynomial expansions in order to achieve both geometrical refinement and better accuracy. The diffuser length was fixed to the same length of 222 mm similar to the top slant angle that have previously been studies The diffuser angle was changed from 0 to 50 degrees in increments of 10 degrees and an additional case considering the angle of 5 degrees. For the case of a 0 degree slant angle on the upper surface the peak values for drag and negative lift (downforce) coefficient were achieved with a 30 degrees diffuser angle, where the flow is fully attached with two streamwise vortical structures, analogous to results obtained from Ahmed but with the body flipped upside down. For diffuser angles above 30 degrees, flow is fully separated from the diffuser. The Ahmed body with 25 degrees slant angle and a diffuser achieves a peak value for downforce at a 20 degrees diffuser angle, where the flow on the diffuser has two streamwise vortices combined with some flow separation. The peak drag value for this case is at 30 degrees diffuser angle, where the flow becomes fully separated.
△ Less
Submitted 29 September, 2020; v1 submitted 29 January, 2020;
originally announced January 2020.
-
$rp$-adaptation for compressible flows
Authors:
Julian Marcon,
Giacomo Castiglioni,
David Moxey,
Spencer J. Sherwin,
Joaquim Peiró
Abstract:
We present an $rp$-adaptation strategy for high-fidelity simulation of compressible inviscid flows with shocks. The mesh resolution in regions of flow discontinuities is increased by using a variational optimiser to $r$-adapt the mesh and cluster degrees of freedom there. In regions of smooth flow, we locally increase or decrease the local resolution through increasing or decreasing the polynomial…
▽ More
We present an $rp$-adaptation strategy for high-fidelity simulation of compressible inviscid flows with shocks. The mesh resolution in regions of flow discontinuities is increased by using a variational optimiser to $r$-adapt the mesh and cluster degrees of freedom there. In regions of smooth flow, we locally increase or decrease the local resolution through increasing or decreasing the polynomial order of the elements, respectively. This dual approach allows us to take advantage of the strengths of both methods for best computational performance, thereby reducing the overall cost of the simulation. The adaptation workflow uses a sensor for both discontinuities and smooth regions that is cheap to calculate, but the framework is general and could be used in conjunction with other feature-based sensors or error estimators. We demonstrate this proof-of-concept using two geometries at transonic and supersonic flow regimes. The method has been implemented in the open-source spectral/$hp$ element framework $Nektar++$, and its dedicated high-order mesh generation tool $NekMesh$. The results show that the proposed $rp$-adaptation methodology is a reasonably cost-effective way of improving accuracy.
△ Less
Submitted 18 September, 2020; v1 submitted 24 September, 2019;
originally announced September 2019.
-
Spectral/hp element simulation of flow past a Formula One front wing: validation against experiments
Authors:
Filipe F. Buscariolo,
Julien Hoessler,
David Moxey,
Ayad Jassim,
Kevin Gouder,
Jeremy Basley,
Yushi Murai,
Gustavo R. S. Assi,
Spencer J. Sherwin
Abstract:
Emerging commercial and academic tools are regularly being applied to the design of road and race cars, but there currently are no well-established benchmark cases to study the aerodynamics of race car wings in ground effect. In this paper we propose a new test case, with a relatively complex geometry, supported by the availability of CAD model and experimental results. We refer to the test case a…
▽ More
Emerging commercial and academic tools are regularly being applied to the design of road and race cars, but there currently are no well-established benchmark cases to study the aerodynamics of race car wings in ground effect. In this paper we propose a new test case, with a relatively complex geometry, supported by the availability of CAD model and experimental results. We refer to the test case as the Imperial Front Wing, originally based on the front wing and endplate design of the McLaren 17D race car. A comparison of different resolutions of a high fidelity spectral/hp element simulation using under-resolved DNS/implicit LES approach with fourth and fifth polynomial order is presented. The results demonstrate good correlation to both the wall-bounded streaklines obtained by oil flow visualization and experimental PIV results, correctly predicting key characteristics of the time-averaged flow structures, namely intensity, contours and locations. This study highlights the resolution requirements in capturing salient flow features arising from this type of challenging geometry, providing an interesting test case for both traditional and emerging high-fidelity simulations.
△ Less
Submitted 14 September, 2019;
originally announced September 2019.
-
Numerical study on the effect of geometric approximation error in the numerical solution of PDEs using a high-order curvilinear mesh
Authors:
Sehun Chun,
Julian Marcon,
Joaquim Peiro,
Spencer J. Sherwin
Abstract:
When time-dependent partial differential equations (PDEs) are solved numerically in a domain with curved boundary or on a curved surface, mesh error and geometric approximation error caused by the inaccurate location of vertices and other interior grid points, respectively, could be the main source of the inaccuracy and instability of the numerical solutions of PDEs. The role of these geometric er…
▽ More
When time-dependent partial differential equations (PDEs) are solved numerically in a domain with curved boundary or on a curved surface, mesh error and geometric approximation error caused by the inaccurate location of vertices and other interior grid points, respectively, could be the main source of the inaccuracy and instability of the numerical solutions of PDEs. The role of these geometric errors in deteriorating the stability and particularly the conservation properties are largely unknown, which seems to necessitate very fine meshes especially to remove geometric approximation error. This paper aims to investigate the effect of geometric approximation error by using a high-order mesh with negligible geometric approximation error, even for high order polynomial of order p. To achieve this goal, the high-order mesh generator from CAD geometry called NekMesh is adapted for surface mesh generation in comparison to traditional meshes with non-negligible geometric approximation error. Two types of numerical tests are considered. Firstly, the accuracy of differential operators is compared for various p on a curved element of the sphere. Secondly, by applying the method of moving frames, four different time-dependent PDEs on the sphere are numerically solved to investigate the impact of geometric approximation error on the accuracy and conservation properties of high-order numerical schemes for PDEs on the sphere.
△ Less
Submitted 25 November, 2020; v1 submitted 23 August, 2019;
originally announced August 2019.
-
Naturally curved quadrilateral mesh generation using an adaptive spectral element solver
Authors:
Julian Marcon,
David A. Kopriva,
Spencer J. Sherwin,
Joaquim Peiró
Abstract:
We describe an adaptive version of a method for generating valid naturally curved quadrilateral meshes. The method uses a guiding field, derived from the concept of a cross field, to create block decompositions of multiply connected two dimensional domains. The a priori curved quadrilateral blocks can be further split into a finer high-order mesh as needed. The guiding field is computed by a Lapla…
▽ More
We describe an adaptive version of a method for generating valid naturally curved quadrilateral meshes. The method uses a guiding field, derived from the concept of a cross field, to create block decompositions of multiply connected two dimensional domains. The a priori curved quadrilateral blocks can be further split into a finer high-order mesh as needed. The guiding field is computed by a Laplace equation solver using a continuous Galerkin or discontinuous Galerkin spectral element formulation. This operation is aided by using $p$-adaptation to achieve faster convergence of the solution with respect to the computational cost. From the guiding field, irregular nodes and separatrices can be accurately located. A first version of the code is implemented in the open source spectral element framework Nektar++ and its dedicated high order mesh generation platform NekMesh.
△ Less
Submitted 18 September, 2019; v1 submitted 12 August, 2019;
originally announced August 2019.
-
Nektar++: enhancing the capability and application of high-fidelity spectral/$hp$ element methods
Authors:
David Moxey,
Chris D. Cantwell,
Yan Bao,
Andrea Cassinelli,
Giacomo Castiglioni,
Sehun Chun,
Emilia Juda,
Ehsan Kazemi,
Kilian Lackhove,
Julian Marcon,
Gianmarco Mengaldo,
Douglas Serson,
Michael Turner,
Hui Xu,
Joaquim Peiró,
Robert M. Kirby,
Spencer J. Sherwin
Abstract:
Nektar++ is an open-source framework that provides a flexible, high-performance and scalable platform for the development of solvers for partial differential equations using the high-order spectral/$hp$ element method. In particular, Nektar++ aims to overcome the complex implementation challenges that are often associated with high-order methods, thereby allowing them to be more readily used in a…
▽ More
Nektar++ is an open-source framework that provides a flexible, high-performance and scalable platform for the development of solvers for partial differential equations using the high-order spectral/$hp$ element method. In particular, Nektar++ aims to overcome the complex implementation challenges that are often associated with high-order methods, thereby allowing them to be more readily used in a wide range of application areas. In this paper, we present the algorithmic, implementation and application developments associated with our Nektar++ version 5.0 release. We describe some of the key software and performance developments, including our strategies on parallel I/O, on in situ processing, the use of collective operations for exploiting current and emerging hardware, and interfaces to enable multi-solver coupling. Furthermore, we provide details on a newly developed Python interface that enables a more rapid introduction for new users unfamiliar with spectral/$hp$ element methods, C++ and/or Nektar++. This release also incorporates a number of numerical method developments - in particular: the method of moving frames, which provides an additional approach for the simulation of equations on embedded curvilinear manifolds and domains; a means of handling spatially variable polynomial order; and a novel technique for quasi-3D simulations to permit spatially-varying perturbations to the geometry in the homogeneous direction. Finally, we demonstrate the new application-level features provided in this release, namely: a facility for generating high-order curvilinear meshes called NekMesh; a novel new AcousticSolver for aeroacoustic problems; our development of a 'thick' strip model for the modelling of fluid-structure interaction problems in the context of vortex-induced vibrations. We conclude by commenting some directions for future code development and expansion.
△ Less
Submitted 26 November, 2019; v1 submitted 8 June, 2019;
originally announced June 2019.
-
A High Resolution PDE Approach to Quadrilateral Mesh Generation
Authors:
Julian Marcon,
David A. Kopriva,
Spencer J. Sherwin,
Joaquim Peiró
Abstract:
We describe a high order technique to generate quadrilateral decompositions and meshes for complex two dimensional domains using spectral elements in a field guided procedure. Inspired by cross field methods, we never actually compute crosses. Instead, we compute a high order accurate guiding field using a continuous Galerkin (CG) or discontinuous Galerkin (DG) spectral element method to solve a L…
▽ More
We describe a high order technique to generate quadrilateral decompositions and meshes for complex two dimensional domains using spectral elements in a field guided procedure. Inspired by cross field methods, we never actually compute crosses. Instead, we compute a high order accurate guiding field using a continuous Galerkin (CG) or discontinuous Galerkin (DG) spectral element method to solve a Laplace equation for each of the field variables using the open source code Nektar++. The spectral method provides spectral convergence and sub-element resolution of the fields. The DG approximation allows meshing of corners that are not multiples of $π/2$ in a discretization consistent manner, when needed. The high order field can then be exploited to accurately find irregular nodes, and can be accurately integrated using a high order separatrix integration method to avoid features like limit cycles. The result is a mesh with naturally curved quadrilateral elements that do not need to be curved a posteriori to eliminate invalid elements. The mesh generation procedure is implemented in the open source mesh generation program NekMesh.
△ Less
Submitted 30 August, 2019; v1 submitted 8 January, 2019;
originally announced January 2019.
-
A variational approach to high-order r-adaptation
Authors:
Julian Marcon,
Michael Turner,
David Moxey,
Spencer J. Sherwin,
Joaquim Peiró
Abstract:
A variational framework, initially developed for high-order mesh optimisation, is being extended for r-adaptation. The method is based on the minimisation of a functional of the mesh deformation. To achieve adaptation, elements of the initial mesh are manipulated using metric tensors to obtain target elements. The nonlinear optimisation in turns adapts the final high-order mesh to best fit the des…
▽ More
A variational framework, initially developed for high-order mesh optimisation, is being extended for r-adaptation. The method is based on the minimisation of a functional of the mesh deformation. To achieve adaptation, elements of the initial mesh are manipulated using metric tensors to obtain target elements. The nonlinear optimisation in turns adapts the final high-order mesh to best fit the description of the target elements by minimising the element distortion. Encouraging preliminary results prove that the method behaves well and can be used in the future for more extensive work which shall include the use of error indicators from CFD simulations.
△ Less
Submitted 4 January, 2019;
originally announced January 2019.
-
Spectral/hp element methods: recent developments, applications, and perspectives
Authors:
Hui Xu,
Chris D. Cantwell,
Carlos Monteserin,
Claes Eskilsson,
Allan P. Engsig-Karup,
Spencer J. Sherwin
Abstract:
The spectral/hp element method combines the geometric flexibility of the classical h-type finite element technique with the desirable numerical properties of spectral methods, employing high-degree piecewise polynomial basis functions on coarse finite element-type meshes. The spatial approximation is based upon orthogonal polynomials, such as Legendre or Chebychev polynomials, modified to accommod…
▽ More
The spectral/hp element method combines the geometric flexibility of the classical h-type finite element technique with the desirable numerical properties of spectral methods, employing high-degree piecewise polynomial basis functions on coarse finite element-type meshes. The spatial approximation is based upon orthogonal polynomials, such as Legendre or Chebychev polynomials, modified to accommodate C0-continuous expansions. Computationally and theoretically, by increasing the polynomial order p, high-precision solutions and fast convergence can be obtained and, in particular, under certain regularity assumptions an exponential reduction in approximation error between numerical and exact solutions can be achieved. This method has now been applied in many simulation studies of both fundamental and practical engineering flows. This paper briefly describes the formulation of the spectral/hp element method and provides an overview of its application to computational fluid dynamics. In particular, it focuses on the use the spectral/hp element method in transitional flows and ocean engineering. Finally, some of the major challenges to be overcome in order to use the spectral/hp element method in more complex science and engineering applications are discussed.
△ Less
Submitted 19 February, 2018;
originally announced February 2018.
-
A comparative study on polynomial dealiasing and split form discontinuous Galerkin schemes for under-resolved turbulence computations
Authors:
Andrew R. Winters,
Rodrigo C. Moura,
Gianmarco Mengaldo,
Gregor J. Gassner,
Stefanie Walch,
Joaquim Peiro,
Spencer J. Sherwin
Abstract:
This work focuses on the accuracy and stability of high-order nodal discontinuous Galerkin (DG) methods for under-resolved turbulence computations. In particular we consider the inviscid Taylor-Green vortex (TGV) flow to analyse the implicit large eddy simulation (iLES) capabilities of DG methods at very high Reynolds numbers. The governing equations are discretised in two ways in order to suppres…
▽ More
This work focuses on the accuracy and stability of high-order nodal discontinuous Galerkin (DG) methods for under-resolved turbulence computations. In particular we consider the inviscid Taylor-Green vortex (TGV) flow to analyse the implicit large eddy simulation (iLES) capabilities of DG methods at very high Reynolds numbers. The governing equations are discretised in two ways in order to suppress aliasing errors introduced into the discrete variational forms due to the under-integration of non-linear terms. The first, more straightforward way relies on consistent/over-integration, where quadrature accuracy is improved by using a larger number of integration points, consistent with the degree of the non-linearities. The second strategy, originally applied in the high-order finite difference community, relies on a split (or skew-symmetric) form of the governing equations. Different split forms are available depending on how the variables in the non-linear terms are grouped. The desired split form is then built by averaging conservative and non-conservative forms of the governing equations, although conservativity of the DG scheme is fully preserved. A preliminary analysis based on Burgers' turbulence in one spatial dimension is conducted and shows the potential of split forms in kee** the energy of higher-order polynomial modes close to the expected levels. This indicates that the favourable dealiasing properties observed from split-form approaches in more classical schemes seem to hold for DG. The remainder of the study considers a comprehensive set of (under-resolved) computations of the inviscid TGV flow and compares the accuracy and robustness of consistent/over-integration and split form discretisations based on the local Lax-Friedrichs and Roe-type Riemann solvers...
△ Less
Submitted 18 May, 2018; v1 submitted 28 November, 2017;
originally announced November 2017.
-
Implicit Large Eddy Simulation of a wingtip vortex at $Re_c = 1.2\cdot 10^6$
Authors:
Jean-Eloi W. Lombard,
David Moxey,
Julien F. A. Hoessler,
Sridar Dhandapani,
Mark J. Taylor,
Spencer J. Sherwin
Abstract:
In this article we present recent developments in numerical methods for performing a Large Eddy Simulation (LES) of the formation and evolution of a wingtip vortex. The development of these vortices in the near wake, in combination with the large Reynolds numbers present in these cases, make these types of test cases particularly challenging to investigate numerically. We first give an overview of…
▽ More
In this article we present recent developments in numerical methods for performing a Large Eddy Simulation (LES) of the formation and evolution of a wingtip vortex. The development of these vortices in the near wake, in combination with the large Reynolds numbers present in these cases, make these types of test cases particularly challenging to investigate numerically. We first give an overview of the Spectral Vanishing Viscosity--implicit LES (SVV-iLES) solver that is used to perform the simulations, and highlight techniques that have been adopted to solve various numerical issues that arise when studying such cases. To demonstrate the method's viability, we present results from numerical simulations of flow over a NACA 0012 profile wingtip at $Re_c = 1.2\cdot 10^6$ and compare them against experimental data, which is to date the highest Reynolds number achieved for a LES that has been correlated with experiments for this test case. Our model correlates favorably with experiment, both for the characteristic jetting in the primary vortex and pressure distribution on the wing surface. The proposed method is of general interest for the modeling of transitioning vortex dominated flows over complex geometries.
△ Less
Submitted 21 July, 2015;
originally announced July 2015.
-
Influence of localised smooth steps on the instability of a boundary layer
Authors:
Hui Xu,
Jean-Eloi W. Lombard,
Spencer J. Sherwin
Abstract:
We consider a smooth forward facing step defined by the Gauss error function of height 4-30\% and four times the width of the local boundary layer thickness $δ_{99}$. The boundary layer flow over a smooth forward-facing stepped plate is studied with particular emphasis on stabilisation and destabilisation of the Tollmien-Schlichting (TS) waves and subsequently on transition. The interaction betwee…
▽ More
We consider a smooth forward facing step defined by the Gauss error function of height 4-30\% and four times the width of the local boundary layer thickness $δ_{99}$. The boundary layer flow over a smooth forward-facing stepped plate is studied with particular emphasis on stabilisation and destabilisation of the Tollmien-Schlichting (TS) waves and subsequently on transition. The interaction between TS waves at a range of frequencies and a base flow over a single/two forward facing smooth steps is conducted by linear analysis. The results indicate that for a high frequency TS wave, the amplitude of the TS wave is attenuated in the unstable regime of the neutral stability curve corresponding to a flat plate boundary layer. Furthermore, it is observed that two smooth forward facing steps lead to a more acute reduction of the amplitude of the TS wave. When the height of a step is increased to more than 20\% of the local boundary layer thickness for a fixed width parameter, the TS wave is amplified and thereby a destabilisation effect is introduced. Therefore, stabilisation or destabilisation effect of a smooth step is typically dependent on its shape parameters. To validate the results of the linear stability analysis, where a high-frequency TS wave is damped by the forward facing smooth steps direct numerical simulation (DNS) is performed. The results of the DNS correlate favorably with the linear analysis and show that for the investigated high frequency TS wave, the K-type transition process is altered whereas the onset of the H-type transition is postponed. The results of the DNS suggest that for a high-frequency perturbation $\mathcal{F}=150$ and in the absence of other external perturbations, two forward facing steps of height 5\% and 12\% of the boundary layer thickness delayed H-type transition scenario and completely suppresses it for the K-type transition.
△ Less
Submitted 10 March, 2016; v1 submitted 23 April, 2015;
originally announced April 2015.
-
An adaptive selective frequency dam** method
Authors:
Bastien E. Jordi,
Colin J. Cotter,
Spencer J. Sherwin
Abstract:
The selective frequency dam** (SFD) method is an alternative to classical Newton's method to obtain unstable steady-state solutions of dynamical systems. However this method has two main limitations: it does not converge for arbitrary control parameters; and when it does converge, the time necessary to reach the steady-state solution may be very long. In this paper we present an adaptive algorit…
▽ More
The selective frequency dam** (SFD) method is an alternative to classical Newton's method to obtain unstable steady-state solutions of dynamical systems. However this method has two main limitations: it does not converge for arbitrary control parameters; and when it does converge, the time necessary to reach the steady-state solution may be very long. In this paper we present an adaptive algorithm to address these two issues. We show that by evaluating the dominant eigenvalue of a "partially converged" steady flow, we can select a control coefficient and a filter width that ensure an optimum convergence of the SFD method. We apply this adaptive method to several classical test cases of computational fluid dynamics and we show that a steady-state solution can be obtained without any a priori knowledge of the flow stability properties.
△ Less
Submitted 14 December, 2014;
originally announced December 2014.
-
Encapsulated formulation of the Selective Frequency Dam** method
Authors:
Bastien E. Jordi,
C. J. Cotter,
Spencer J. Sherwin
Abstract:
We present an alternative "encapsulated" formulation of the Selective Frequency Dam** method for finding unstable equilibria of dynamical systems, which is particularly useful when analysing the stability of fluid flows. The formulation makes use of splitting methods, which means that it can be wrapped around an existing time-step** code as a "black box". The method is first applied to a scala…
▽ More
We present an alternative "encapsulated" formulation of the Selective Frequency Dam** method for finding unstable equilibria of dynamical systems, which is particularly useful when analysing the stability of fluid flows. The formulation makes use of splitting methods, which means that it can be wrapped around an existing time-step** code as a "black box". The method is first applied to a scalar problem in order to analyse its stability and highlight the roles of the control coefficient $χ$ and the filter width $Δ$ in the convergence (or not) towards the steady-state. Then the steady-state of the incompressible flow past a two-dimensional cylinder at $Re=100$, obtained with a code which implements the spectral/hp element method, is presented.
△ Less
Submitted 27 November, 2013;
originally announced November 2013.
-
Relaminarisation of Re_τ = 100 channel flow with globally stabilising linear feedback control
Authors:
A S Sharma,
J F Morrison,
B J McKeon,
D J N L Limebeer,
W H Koberg,
S J Sherwin
Abstract:
The problems of nonlinearity and high dimension have so far prevented a complete solution of the control of turbulent flow. Addressing the problem of nonlinearity, we propose a flow control strategy which ensures that the energy of any perturbation to the target profile decays monotonically. The controller's estimate of the flow state is similarly guaranteed to converge to the true value. We prese…
▽ More
The problems of nonlinearity and high dimension have so far prevented a complete solution of the control of turbulent flow. Addressing the problem of nonlinearity, we propose a flow control strategy which ensures that the energy of any perturbation to the target profile decays monotonically. The controller's estimate of the flow state is similarly guaranteed to converge to the true value. We present a one-time off-line synthesis procedure, which generalises to accommodate more restrictive actuation and sensing arrangements, with conditions for existence for the controller given in this case. The control is tested in turbulent channel flow ($Re_τ=100$) using full-domain sensing and actuation on the wall-normal velocity. Concentrated at the point of maximum inflection in the mean profile, the control directly counters the supply of turbulence energy arising from the interaction of the wall-normal perturbations with the flow shear. It is found that the control is only required for the larger-scale motions, specifically those above the scale of the mean streak spacing. Minimal control effort is required once laminar flow is achieved. The response of the near-wall flow is examined in detail, with particular emphasis on the pressure and wall-normal velocity fields, in the context of Landahl's theory of sheared turbulence.
△ Less
Submitted 21 January, 2013;
originally announced January 2013.
