Showing 1–6 of 6 results for author: Shelly, C D

Integration of through-sapphire substrate machining with superconducting quantum processors

Authors: Narendra Acharya, Robert Armstrong, Yashwanth Balaji, Kevin G Crawford, James C Gates, Paul C Gow, Oscar W Kennedy, Renuka Devi Pothuraju, Kowsar Shahbazi, Connor D Shelly

Abstract: We demonstrate a sapphire machining process integrated with intermediate-scale quantum processors. The process allows through-substrate electrical connections, necessary for low-frequency mode-mitigation, as well as signal-routing, which are vital as quantum computers scale in qubit number, and thus dimension. High-coherence qubits are required to build fault-tolerant quantum computers and so mate… ▽ More We demonstrate a sapphire machining process integrated with intermediate-scale quantum processors. The process allows through-substrate electrical connections, necessary for low-frequency mode-mitigation, as well as signal-routing, which are vital as quantum computers scale in qubit number, and thus dimension. High-coherence qubits are required to build fault-tolerant quantum computers and so material choices are an important consideration when develo** a qubit technology platform. Sapphire, as a low-loss dielectric substrate, has shown to support high-coherence qubits. In addition, recent advances in material choices such as tantalum and titanium-nitride, both deposited on a sapphire substrate, have demonstrated qubit lifetimes exceeding 0.3 ms. However, the lack of any process equivalent of deep-silicon etching to create through-substrate-vias in sapphire, or to inductively shunt large dies, has limited sapphire to small-scale processors, or necessitates the use of chiplet architecture. Here, we present a sapphire machining process that is compatible with high-coherence qubits. This technique immediately provides a means to scale QPUs with integrated mode-mitigation, and provides a route toward the development of through-sapphire-vias, both of which allow the advantages of sapphire to be leveraged as well as facilitating the use of sapphire-compatible materials for large-scale QPUs. △ Less

Submitted 14 June, 2024; originally announced June 2024.

Comments: 9 pages, 6 figures

Electron-beam annealing of Josephson junctions for frequency tuning of quantum processors

Authors: Yashwanth Balaji, Narendra Acharya, Robert Armstrong, Kevin G. Crawford, Sergey Danilin, Thomas Dixon, Oscar W. Kennedy, Renuka Devi Pothuraju, Kowsar Shahbazi, Connor D. Shelly

Abstract: Superconducting qubits are a promising route to achieving large-scale quantum computers. A key challenge in realising large-scale superconducting quantum processors involves mitigating frequency collisions. In this paper, we present an approach to tuning fixed-frequency qubits with the use of an electron beam to locally anneal the Josephson junction. We demonstrate the ability to both increase and… ▽ More Superconducting qubits are a promising route to achieving large-scale quantum computers. A key challenge in realising large-scale superconducting quantum processors involves mitigating frequency collisions. In this paper, we present an approach to tuning fixed-frequency qubits with the use of an electron beam to locally anneal the Josephson junction. We demonstrate the ability to both increase and decrease the junction barrier resistance. The technique shows an improvement in wafer scale frequency targetting by assessing the frequency collisions in our qubit architecture. Coherence measurements are also done to evaluate the performance before and after tuning. The tuning process utilises a standard electron beam lithography system, ensuring reproducibility and implementation by any group capable of fabricating these Josephson junctions. This technique has the potential to significantly improve the performance of large-scale quantum computing systems, thereby paving the way for the future of quantum computing. △ Less

Submitted 27 February, 2024; originally announced February 2024.

Comments: 12 pages, 8 figures

Hybrid Quantum Interferometer in Bifurcation Mode as a Latching Quantum Readout

Authors: Connor D Shelly, Christopher Checkley, Victor T Petrashov

Abstract: We have developed a new type of magnetometer consisting of a Hybrid Quantum Interference Device (HyQUID) that is set in a bi-stable state. We demonstrate its operation in a latching mode that can be employed to measure small changes in the applied flux. The device can be used to probe the flux state of a superconducting circuit using straightforward electrical resistance measurements, making it su… ▽ More We have developed a new type of magnetometer consisting of a Hybrid Quantum Interference Device (HyQUID) that is set in a bi-stable state. We demonstrate its operation in a latching mode that can be employed to measure small changes in the applied flux. The device can be used to probe the flux state of a superconducting circuit using straightforward electrical resistance measurements, making it suitable as a simple qubit readout with low back-action. △ Less

Submitted 21 July, 2020; originally announced July 2020.

Journal ref: Phys. Rev. Applied 15, 034070 (2021)

Capturing Complex Behaviour in Josephson Travelling Wave Parametric Amplifiers

Authors: Tom Dixon, Jacob W. Dunstan, George B. Long, Jonathan M. Williams, Phil J. Meeson, Connor D. Shelly

Abstract: We present an analysis of wave-mixing in recently developed Josephson Travelling Wave Parametric Amplifiers (JTWPAs). Circuit simulations performed using WRspice show the full behaviour of the JTWPA allowing propagation of all tones. The Coupled Mode Equations (CMEs) containing only pump, signal, and idler propagation are shown to be insufficient to completely capture complex mixing behaviour in t… ▽ More We present an analysis of wave-mixing in recently developed Josephson Travelling Wave Parametric Amplifiers (JTWPAs). Circuit simulations performed using WRspice show the full behaviour of the JTWPA allowing propagation of all tones. The Coupled Mode Equations (CMEs) containing only pump, signal, and idler propagation are shown to be insufficient to completely capture complex mixing behaviour in the JTWPA. Extension of the CMEs through additional state vectors in the analytic solutions allows closer agreement with WRspice. We consider an ordered framework for the systematic inclusion of extended eigenmodes and make a qualitative comparison with WRspice at each step. The agreement between the two methods validates both approaches and provides insight into the operation of the JTWPA. We show that care should be taken when using the CMEs and propose that WRspice should be used as a design tool for non-linear superconducting circuits such as the JTWPA. △ Less

Submitted 11 December, 2019; originally announced December 2019.

Comments: 11 pages, 6 figures

Journal ref: Phys. Rev. Applied 14, 034058 (2020)

Existence of Shapiro Steps in the Dissipative Regime in Superconducting Weak Links

Authors: Connor D. Shelly, Patrick See, Ivan Rungger, Jonathan M. Williams

Abstract: We present measurements of microwave-induced Shapiro steps in a superconducting nanobridge weak link in the dissipative branch of a hysteretic current-voltage characteristic. We demonstrate that Shapiro steps can be used to infer a reduced critical current and associated effective local temperature. Our observation of Shapiro steps in the dissipative branch hows that a finite Josephson coupling ex… ▽ More We present measurements of microwave-induced Shapiro steps in a superconducting nanobridge weak link in the dissipative branch of a hysteretic current-voltage characteristic. We demonstrate that Shapiro steps can be used to infer a reduced critical current and associated effective local temperature. Our observation of Shapiro steps in the dissipative branch hows that a finite Josephson coupling exists in the dissipative state and thus can be used to put an upper limit on the effective temperature and on the size of the region that can be heated above the critical temperature. This work provides evidence that Josephson behaviour can still exist in thermally-hysteretic weak link devices and will allow extension of the temperature ranges that nanobridge based single flux quantum circuits, nanoSQUIDs and Josephson voltage standards can be used. △ Less

Submitted 30 August, 2019; v1 submitted 27 June, 2018; originally announced June 2018.

Journal ref: Phys. Rev. Applied 13, 024070 (2020)

Resolving thermoelectric paradox in superconductors

Authors: C. D. Shelly, E. A. Matrozova, V. T. Petrashov

Abstract: For almost a century thermoelectricity in superconductors has been one of the most intriguing topics of physics. At the early stages in the 1920s, the mere existence of thermoelectric effects in superconductors was questioned. Theoretical breakthrough came in the 1970s, when the generation of a measurable thermoelectric magnetic flux in superconducting loops was predicted; however a major crisis d… ▽ More For almost a century thermoelectricity in superconductors has been one of the most intriguing topics of physics. At the early stages in the 1920s, the mere existence of thermoelectric effects in superconductors was questioned. Theoretical breakthrough came in the 1970s, when the generation of a measurable thermoelectric magnetic flux in superconducting loops was predicted; however a major crisis developed when experiments showed a gross discrepancy with the theory. Moreover, different experiments disagreed with each other by orders of magnitude. This led to a stalemate in bringing theory and experiment into agreement. With this work we resolve this stalemate, thus solving this long-standing paradox and open prospects for exploration of novel thermoelectric phenomena and new avenues for practical applications of superconductors. △ Less

Submitted 25 July, 2018; v1 submitted 28 August, 2015; originally announced August 2015.

Journal ref: Science Advances, 2, e1501250 (2016)