-
Phase-Based Breathing Rate Monitoring in Patient Rooms Using 6G Terahertz Technology
Authors:
Simon Haeger,
Akram Najjar,
Caner Bektas,
Dien Lessy,
Mohammed El-Absi,
Fawad Sheikh,
Stefan Boecker,
Thomas Kaiser,
Christian Wietfeld
Abstract:
The 6G standard aims to be an integral part of the future economy by providing high-performance communication and sensing services. At terahertz (THz) frequencies, indoor campus networks can offer the highest sensing quality. Health monitoring in hospitals is expected to be an application site for these. This work outlines a monostatic phase-based system for breathing rate monitoring. Our feasibil…
▽ More
The 6G standard aims to be an integral part of the future economy by providing high-performance communication and sensing services. At terahertz (THz) frequencies, indoor campus networks can offer the highest sensing quality. Health monitoring in hospitals is expected to be an application site for these. This work outlines a monostatic phase-based system for breathing rate monitoring. Our feasibility study observes motion measurement accuracy down to the micrometer level. However, we also find that the patient's pose needs to be considered for generalized applicability. Thus, a solution that leverages multiple propagation paths and beam orientations is proposed.
△ Less
Submitted 14 June, 2023; v1 submitted 25 May, 2023;
originally announced May 2023.
-
Blind-Spot Collision Detection System for Commercial Vehicles Using Multi Deep CNN Architecture
Authors:
Muhammad Muzammel,
Mohd Zuki Yusoff,
Mohamad Naufal Mohamad Saad,
Faryal Sheikh,
Muhammad Ahsan Awais
Abstract:
Buses and heavy vehicles have more blind spots compared to cars and other road vehicles due to their large sizes. Therefore, accidents caused by these heavy vehicles are more fatal and result in severe injuries to other road users. These possible blind-spot collisions can be identified early using vision-based object detection approaches. Yet, the existing state-of-the-art vision-based object dete…
▽ More
Buses and heavy vehicles have more blind spots compared to cars and other road vehicles due to their large sizes. Therefore, accidents caused by these heavy vehicles are more fatal and result in severe injuries to other road users. These possible blind-spot collisions can be identified early using vision-based object detection approaches. Yet, the existing state-of-the-art vision-based object detection models rely heavily on a single feature descriptor for making decisions. In this research, the design of two convolutional neural networks (CNNs) based on high-level feature descriptors and their integration with faster R-CNN is proposed to detect blind-spot collisions for heavy vehicles. Moreover, a fusion approach is proposed to integrate two pre-trained networks (i.e., Resnet 50 and Resnet 101) for extracting high level features for blind-spot vehicle detection. The fusion of features significantly improves the performance of faster R-CNN and outperformed the existing state-of-the-art methods. Both approaches are validated on a self-recorded blind-spot vehicle detection dataset for buses and an online LISA dataset for vehicle detection. For both proposed approaches, a false detection rate (FDR) of 3.05% and 3.49% are obtained for the self recorded dataset, making these approaches suitable for real time applications.
△ Less
Submitted 19 August, 2022; v1 submitted 17 August, 2022;
originally announced August 2022.
-
Quantifying the dust in SN 2012aw and iPTF14hls with ORBYTS
Authors:
Maria Niculescu-Duvaz,
M. J. Barlow,
W. Dunn,
A. Bevan,
Omar Ahmed,
David Arkless,
Jon Barker,
Sidney Bartolotta,
Liam Brockway,
Daniel Browne,
Ubaid Esmail,
Max Garner,
Wiktoria Guz,
Scarlett King,
Hayri Kose,
Madeline Lampstaes-Capes,
Joseph Magen,
Nicole Morrison,
Kyaw Oo,
Balvinder Paik,
Joanne Primrose,
Danny Quick,
Anais Radeka,
Anthony Rodney,
Eleanor Sandeman
, et al. (10 additional authors not shown)
Abstract:
Core-collapse supernovae (CCSNe) are potentially capable of producing large quantities of dust, with strong evidence that ejecta dust masses can grow significantly over extended periods of time. Red-blue asymmetries in the broad emission lines of CCSNe can be modelled using the Monte Carlo radiative transfer code DAMOCLES, to determine ejecta dust masses. To facilitate easier use of DAMOCLES, we p…
▽ More
Core-collapse supernovae (CCSNe) are potentially capable of producing large quantities of dust, with strong evidence that ejecta dust masses can grow significantly over extended periods of time. Red-blue asymmetries in the broad emission lines of CCSNe can be modelled using the Monte Carlo radiative transfer code DAMOCLES, to determine ejecta dust masses. To facilitate easier use of DAMOCLES, we present a Tkinter graphical user interface (GUI) running DAMOCLES. The GUI was tested by high school students as part of the Original Research By Young Twinkle Students (ORBYTS) programme, who used it to measure the dust masses formed at two epochs in two Type IIP CCSNe: SN 2012aw and iPTF14hls, demonstrating that a wide range of people can contribute significantly to scientific advancement. Bayesian methods were used to quantify uncertainties on our model parameters. From the presence of a red scattering wing in the day 1863 H$α$ profile of SN 2012aw, we were able to constrain the dust composition to large (radius $>0.1 μ$m) silicate grains, with a dust mass of $6.0^{+21.9}_{-3.6}\times10^{-4} M_\odot$. From the day 1158 H$α$ profile of SN 2012aw, we found a dust mass of $3.0^{+14}_{-2.5}\times10^{-4}$ M$_\odot$. For iPTF14hls, we found a day 1170 dust mass of 8.1 $^{+81}_{-7.6}\times10^{-5}$ M$_{\odot}$ for a dust composition consisting of 50% amorphous carbon and 50% astronomical silicate. At 1000 days post explosion, SN 2012aw and iPTF14hls have formed less dust than SN 1987A, suggesting that SN 1987A could form larger dust masses than other Type IIP's.
△ Less
Submitted 4 January, 2023; v1 submitted 1 June, 2022;
originally announced June 2022.
-
CMOS-based cryogenic control of silicon quantum circuits
Authors:
Xiao Xue,
Bishnu Patra,
Jeroen P. G. van Dijk,
Nodar Samkharadze,
Sushil Subramanian,
Andrea Corna,
Charles Jeon,
Farhana Sheikh,
Esdras Juarez-Hernandez,
Brando Perez Esparza,
Huzaifa Rampurawala,
Brent Carlton,
Surej Ravikumar,
Carlos Nieva,
Sungwon Kim,
Hyung-** Lee,
Amir Sammak,
Giordano Scappucci,
Menno Veldhorst,
Fabio Sebastiano,
Masoud Babaie,
Stefano Pellerano,
Edoardo Charbon,
Lieven M. K. Vandersypen
Abstract:
The most promising quantum algorithms require quantum processors hosting millions of quantum bits when targeting practical applications. A major challenge towards large-scale quantum computation is the interconnect complexity. In current solid-state qubit implementations, a major bottleneck appears between the quantum chip in a dilution refrigerator and the room temperature electronics. Advanced l…
▽ More
The most promising quantum algorithms require quantum processors hosting millions of quantum bits when targeting practical applications. A major challenge towards large-scale quantum computation is the interconnect complexity. In current solid-state qubit implementations, a major bottleneck appears between the quantum chip in a dilution refrigerator and the room temperature electronics. Advanced lithography supports the fabrication of both CMOS control electronics and qubits in silicon. When the electronics are designed to operate at cryogenic temperatures, it can ultimately be integrated with the qubits on the same die or package, overcoming the wiring bottleneck. Here we report a cryogenic CMOS control chip operating at 3K, which outputs tailored microwave bursts to drive silicon quantum bits cooled to 20mK. We first benchmark the control chip and find electrical performance consistent with 99.99% fidelity qubit operations, assuming ideal qubits. Next, we use it to coherently control actual silicon spin qubits and find that the cryogenic control chip achieves the same fidelity as commercial instruments. Furthermore, we highlight the extensive capabilities of the control chip by programming a number of benchmarking protocols as well as the Deutsch-Josza algorithm on a two-qubit quantum processor. These results open up the path towards a fully integrated, scalable silicon-based quantum computer.
△ Less
Submitted 29 September, 2020;
originally announced September 2020.
-
Impact of Relay Cooperation on the Performance of Large-scale Multipair Two-way Relay Networks
Authors:
Muris Sarajlic,
Liang Liu,
Fredrik Rusek,
Farhana Sheikh,
Ove Edfors
Abstract:
We consider a multipair two-way relay communication network, where pairs of user devices exchange information via a relay system. The communication between users employs time division duplex, with all users transmitting simultaneously to relays in one time slot and relays sending the processed information to all users in the next time slot. The relay system consists of a large number of single ant…
▽ More
We consider a multipair two-way relay communication network, where pairs of user devices exchange information via a relay system. The communication between users employs time division duplex, with all users transmitting simultaneously to relays in one time slot and relays sending the processed information to all users in the next time slot. The relay system consists of a large number of single antenna units that can form groups. Within each group, relays exchange channel state information (CSI), signals received in the uplink and signals intended for downlink transmission. On the other hand, per-group CSI and uplink/downlink signals (data) are not exchanged between groups, which perform the data processing completely independently. Assuming that the groups perform zero-forcing in both uplink and downlink, we derive a lower bound for the ergodic sumrate of the described system as a function of the relay group size. By close observation of this lower bound, it is concluded that the sumrate is essentially independent of group size when the group size is much larger than the number of user pairs. This indicates that a very large group of cooperating relays can be substituted by a number of smaller groups, without incurring any significant performance reduction. Moreover, this result implies that relay cooperation is more efficient (in terms of resources spent on cooperation) when several smaller relay groups are used in contrast to a single, large group.
△ Less
Submitted 23 July, 2018;
originally announced July 2018.