-
An N-loop potential energy model for levitated mm-scale magnets in cm-scale superconducting coaxial microwave resonators
Authors:
Jeffrey Miller,
Nabin K. Raut,
Demitrius Zulevic,
Harold Hart,
Luis A. Martinez,
Alessandro Castelli,
Raymond Chiao,
Jay E. Shar**
Abstract:
The levitation of a macroscopic object within a superconducting resonator provides a unique and novel platform to study optomechanics, quantum information, and gravitational wave detection. Existing mirror-method and single-loop models for calculating magnet levitation are insufficient for predicting the position and motion of the levitated magnet. If the cavity-magnet interaction is modeled using…
▽ More
The levitation of a macroscopic object within a superconducting resonator provides a unique and novel platform to study optomechanics, quantum information, and gravitational wave detection. Existing mirror-method and single-loop models for calculating magnet levitation are insufficient for predicting the position and motion of the levitated magnet. If the cavity-magnet interaction is modeled using a large number of smaller surface current loops, one can quantitatively model the dynamics of the levitation of the magnet within the cavity. The magnet's most-likely position and orientation can be predicted for non-trivial cavity geometries and cavity orientations. Knowing the potential energy landscape within the cavity configuration also provides a means to estimate the resonant mechanical frequencies at which the levitated magnet vibrates, and enables tailoring the cavity design for specific outcomes.
△ Less
Submitted 14 June, 2023;
originally announced June 2023.
-
Power Dependent Resonant Frequency of a Microwave Cavity due to Magnetic Levitation
Authors:
N. K. Raut,
J. Miller,
H. Hart,
R. Chiao,
J. E. Shar**
Abstract:
Levitation of a magnet by superconductor has been an active area of research to explore the quantum mechanical phenomenon. One of the techniques used is to measure the levitation of a magnet placed inside the superconducting microwave cavity. The levitation height can be probed by measuring the change in microwave frequency. Here, we report measurements of the change in resonance frequency of the…
▽ More
Levitation of a magnet by superconductor has been an active area of research to explore the quantum mechanical phenomenon. One of the techniques used is to measure the levitation of a magnet placed inside the superconducting microwave cavity. The levitation height can be probed by measuring the change in microwave frequency. Here, we report measurements of the change in resonance frequency of the microwave cavity with the Meissner-levitated permanent magnet. The change in resonant frequency and quality factor was measured as a function of input power and temperature. The change in resonate frequency is likely due to the interaction of the magnet with the radio-frequency field inside the microwave cavity.
△ Less
Submitted 12 November, 2022;
originally announced November 2022.
-
Magnetic levitation within a microwave cavity: characterization, challenges, and possibilities
Authors:
Nabin K. Raut,
Jeffery Miller,
Raymond E. Chiao,
Jay E. Shar**
Abstract:
The low energy losses in the superconducting magnetic levitation make it attractive for exciting applications in physics. Recently, superconducting magnetic levitation has been realized as novel mechanical transduction for the individual spin qubit in the nitrogen-vacancy center [1]. Furthermore, the Meissner has been proposed for the study of modified gravitational wave detection [2]. Meissner le…
▽ More
The low energy losses in the superconducting magnetic levitation make it attractive for exciting applications in physics. Recently, superconducting magnetic levitation has been realized as novel mechanical transduction for the individual spin qubit in the nitrogen-vacancy center [1]. Furthermore, the Meissner has been proposed for the study of modified gravitational wave detection [2]. Meissner levitation within the microwave cavity could open avenues for the novel cavity optomechanical system, readout for quantum object such as the transmon, and magnon, gravitational wave detection, and magnetomechanics [3]. This work characterized magnetic levitation within a microwave. It also discusses possibilities, challenges, and room temperature and cryogenic experiments of the cavity-magnet system.
△ Less
Submitted 4 July, 2022;
originally announced August 2022.
-
Comparative study between three models for the levitation height calculation
Authors:
Nabin K. Raut,
Jeffery Miller,
Raymond Y. Chiao,
Jay E. Shar**
Abstract:
Magnetic levitation has been demonstrated and characterized within the coaxial microwave cavity [1,2]. A permanent neodymium magnet is levitated from the edge of the finite-size superconductor [3,4]. One challenge is to develop a better method to calculate levitation height [5]. This paper compares three models, the Mirror method, finite-size superconductor, and two-loop model, for the levitation…
▽ More
Magnetic levitation has been demonstrated and characterized within the coaxial microwave cavity [1,2]. A permanent neodymium magnet is levitated from the edge of the finite-size superconductor [3,4]. One challenge is to develop a better method to calculate levitation height [5]. This paper compares three models, the Mirror method, finite-size superconductor, and two-loop model, for the levitation height calculation. The limitations and advantages of each model are discussed in detail.
△ Less
Submitted 26 July, 2022;
originally announced July 2022.
-
Demonstrating levitation within a microwave cavity
Authors:
Nabin K. Raut,
Jeffery Miller,
Raymond Chiao,
Jay E. Shar**
Abstract:
Levitated systems are desirable due to reduced clam** losses and reduced thermal contact. These advantageous properties have been exploited in optomechanics to achieve ultra-strong coupling between the mechanical mode and the electromagnetic mode. Such schemes provide an opportunity for the quantum manipulation of a macroscopic system. In this letter, we report the first successful experiments w…
▽ More
Levitated systems are desirable due to reduced clam** losses and reduced thermal contact. These advantageous properties have been exploited in optomechanics to achieve ultra-strong coupling between the mechanical mode and the electromagnetic mode. Such schemes provide an opportunity for the quantum manipulation of a macroscopic system. In this letter, we report the first successful experiments with a levitated millimeter-scale neodymium magnet within a centimeter-scale superconducting aluminum coaxial quarter-wave stub cavity. The magnet levitated near the top of the stub, where the electric field is concentrated, perturbs the electric field distribution allowing for small perturbations in the magnet's position to be detected through shifts in the resonance frequency. Resonance spectra are collected via a vector network analyzer (VNA) between temperatures of 5 K and 50 mK revealing movement of the magnet inside of the cavity. Room temperature measurements and finite element calculations are done to calculate the shift in frequency for various positions of the magnet, and an experimentally measured 100 MHz upshift when transitioning into a superconducting state confirms levitation with remanences up to 140 times stronger than the critical field of the aluminum. We achieve levitation heights of 1 - 1.8 mm. We investigate the dependence of levitation height and levitation temperature on the strength of the magnet and, surprisingly, we observe that the levitation temperature and height both increase with permanent magnet strength. Our work describes a novel macroscopic mechanical system capable of sensing and transducing forces, thus allowing for the coupling of disparate classical and quantum systems.
△ Less
Submitted 5 March, 2021; v1 submitted 4 January, 2021;
originally announced January 2021.
-
Meissner levitation of a millimeter size neodymium magnet within a superconducting radio frequency cavity
Authors:
N. K. Raut,
J. Miller,
J. Pate,
R. Chiao,
J. E. Shar**
Abstract:
We report on the magnetic levitation of a millimeter sized neodymium permanent magnet within the interior of a superconducting radio frequency (SRF) cavity. To the best of our knowledge, this is the first experimental work on levitating a magnet within an SRF cavity. The cavity is a coaxial quarter wave microwave resonator made from 6061 aluminum, having a resonance frequency of 10GHz and a loaded…
▽ More
We report on the magnetic levitation of a millimeter sized neodymium permanent magnet within the interior of a superconducting radio frequency (SRF) cavity. To the best of our knowledge, this is the first experimental work on levitating a magnet within an SRF cavity. The cavity is a coaxial quarter wave microwave resonator made from 6061 aluminum, having a resonance frequency of 10GHz and a loaded Q of 1400. The cylindrical magnet (N50) has a height of 1 mm, a diameter of 0.75 mm, a mass of 4 mg, and a remanence of 1.44 T. This produces a peak magnetic field 140 times greater than the critical field of aluminum. Our measurements are consistent over several heating and cooling cycles. Our work provides a path towards a novel optomechanical system.
△ Less
Submitted 5 November, 2020;
originally announced November 2020.
-
Casimir spring and dilution in macroscopic cavity optomechanics
Authors:
Jacob M. Pate,
Maxim Goryachev,
Raymond Y. Chiao,
Jay E. Shar**,
Michael Edmund Tobar
Abstract:
The Casimir force was predicted in 1948 as a force arising between macroscopic bodies from the zero-point energy. At finite temperatures it has been shown that a thermal Casimir force exists due to thermal rather than zero-point energy and there are a growing number of experiments that characterise the effect at a range of temperatures and distances. Additionally, in the rapidly evolving field of…
▽ More
The Casimir force was predicted in 1948 as a force arising between macroscopic bodies from the zero-point energy. At finite temperatures it has been shown that a thermal Casimir force exists due to thermal rather than zero-point energy and there are a growing number of experiments that characterise the effect at a range of temperatures and distances. Additionally, in the rapidly evolving field of cavity optomechanics there is an endeavor to manipulate phonons and enhance coherence. We demonstrate a new way to achieve this through the first observation of Casimir spring and dilution in macroscopic optomechanics, by coupling a metallic SiN membrane to a photonic re-entrant cavity. The attraction of the spatially-localised Casimir spring mimics a non-contacting boundary condition giving rise to increased strain and acoustic coherence through dissipation dilution. This work invents a new way to manipulate phonons via thermal photons leading to ``in situ'' reconfigurable mechanical states, to reduce loss mechanisms and to create new types of acoustic non-linearity -- all at room temperature.
△ Less
Submitted 6 April, 2020;
originally announced April 2020.
-
Telecom-Band Entanglement Generation for Chipscale Quantum Processing
Authors:
Kim Fook Lee,
Prem Kumar,
Jay E. Shar**,
Mark A. Foster,
Alexander L. Gaeta,
Amy C. Turner,
Michal Lipson
Abstract:
We demonstrate polarization-entanglement for non-degenerate and degenerate photon-pairs generated through Kerr-nonlinearity in a nano-scale silicon-on-insulator(SOI) waveguide. We use a compact counter propagating configuration to create two-photon polarization-entangled state, |H>|H> + |V>|V>. We observe two-photon interference with visibility > 91% and > 80% for non-degenerate and degenerate p…
▽ More
We demonstrate polarization-entanglement for non-degenerate and degenerate photon-pairs generated through Kerr-nonlinearity in a nano-scale silicon-on-insulator(SOI) waveguide. We use a compact counter propagating configuration to create two-photon polarization-entangled state, |H>|H> + |V>|V>. We observe two-photon interference with visibility > 91% and > 80% for non-degenerate and degenerate photon-pairs, respectively. The experimental structure can be implemented on optical chips as an integrated source of entangled photons for future quantum computer and communication applications.
△ Less
Submitted 16 January, 2008;
originally announced January 2008.
-
Coherent resonant interactions and slow light with molecules confined in photonic band-gap fibers
Authors:
Saikat Ghosh,
Jay E. Shar**,
Dimitre G. Ouzounov,
Alexander L. Gaeta
Abstract:
We investigate resonant nonlinear optical interactions and demonstrate induced transparency in acetylene molecules in a hollow-core photonic band-gap fiber at 1.5$μ$m. The induced spectral transmission window is used to demonstrate slow-light effects, and we show that the observed broadening of the spectral features is due to collisions of the molecules with the inner walls of the fiber core. Ou…
▽ More
We investigate resonant nonlinear optical interactions and demonstrate induced transparency in acetylene molecules in a hollow-core photonic band-gap fiber at 1.5$μ$m. The induced spectral transmission window is used to demonstrate slow-light effects, and we show that the observed broadening of the spectral features is due to collisions of the molecules with the inner walls of the fiber core. Our results illustrate that such fibers can be used to facilitate strong coherent light-matter interactions even when the optical response of the individual molecules is weak.
△ Less
Submitted 4 December, 2004; v1 submitted 2 December, 2004;
originally announced December 2004.
-
Optical-fiber source of polarization-entangled photon pairs in the 1550nm telecom band
Authors:
Xiaoying Li,
Paul L. Voss,
Jay E. Shar**,
Prem Kumar
Abstract:
We present a fiber based source of polarization-entangled photon pairs that is well suited for quantum communication applications in the 1550nm band of standard fiber-optic telecommunications. Polarization entanglement is created by pum** a nonlinear-fiber Sagnac interferometer with two time-delayed orthogonally-polarized pump pulses and subsequently removing the time distinguishability by pas…
▽ More
We present a fiber based source of polarization-entangled photon pairs that is well suited for quantum communication applications in the 1550nm band of standard fiber-optic telecommunications. Polarization entanglement is created by pum** a nonlinear-fiber Sagnac interferometer with two time-delayed orthogonally-polarized pump pulses and subsequently removing the time distinguishability by passing the parametrically scattered signal-idler photon pairs through a piece of birefringent fiber. Coincidence detection of the signal-idler photons yields biphoton interference with visibility greater than 90%, while no interference is observed in direct detection of either the signal or the idler photons. All four Bell states can be prepared with our setup and we demonstrate violations of CHSH form of Bell's inequalities by up to 10 standard deviations of measurement uncertainty.
△ Less
Submitted 12 August, 2004; v1 submitted 25 February, 2004;
originally announced February 2004.
-
Fiber-Optic Sources of Quantum Entanglement
Authors:
P. Kumar,
X. Li,
M. Fiorentino,
P. L. Voss,
J. E. Shar**,
G. A. Barbosa
Abstract:
We present a fiber-based source of polarization-entangled photon pairs that is well suited for quantum communication applications in the 1.5$μ$m band of standard telecommunication fiber. Quantum-correlated signal and idler photon pairs are produced when a nonlinear-fiber Sagnac interferometer is pumped in the anomalous-dispersion region of the fiber. Recently, we have demonstrated nonclassical p…
▽ More
We present a fiber-based source of polarization-entangled photon pairs that is well suited for quantum communication applications in the 1.5$μ$m band of standard telecommunication fiber. Quantum-correlated signal and idler photon pairs are produced when a nonlinear-fiber Sagnac interferometer is pumped in the anomalous-dispersion region of the fiber. Recently, we have demonstrated nonclassical properties of such photon pairs by using Geiger-mode InGaAs/InP avalanche photodiodes. Polarization entanglement in the photon pairs can be created by pum** the Sagnac interferometer with two orthogonally polarized pulses. In this case the parametrically scattered signal-idler photons yield biphoton interference with $>$90% visibility in coincidence detection, while no interference is observed in direct detection of either the signal or the idler photons.
△ Less
Submitted 20 September, 2002;
originally announced September 2002.
-
Soliton Squeezing in a Mach-Zehnder Fiber Interferometer
Authors:
Marco Fiorentino,
Jay E. Shar**,
Prem Kumar,
Dmitry Levandovsky,
Michael Vasilyev
Abstract:
A new scheme for generating amplitude squeezed light by means of soliton self-phase modulation is experimentally demonstrated. By injecting 180-fs pulses into an equivalent Mach-Zehnder fiber interferometer, a maximum noise reduction of $4.4 \pm 0.3$ dB is obtained ($6.3 \pm 0.6$ dB when corrected for losses). The dependence of noise reduction on the interferometer splitting ratio and fiber leng…
▽ More
A new scheme for generating amplitude squeezed light by means of soliton self-phase modulation is experimentally demonstrated. By injecting 180-fs pulses into an equivalent Mach-Zehnder fiber interferometer, a maximum noise reduction of $4.4 \pm 0.3$ dB is obtained ($6.3 \pm 0.6$ dB when corrected for losses). The dependence of noise reduction on the interferometer splitting ratio and fiber length is studied in detail.
△ Less
Submitted 18 June, 2001;
originally announced June 2001.