-
A Blender-based channel simulator for FMCW Radar
Authors:
Yuan Liu,
Moein Ahmadi,
Johann Fuchs,
Mohammad Alaee-Kerahroodi,
M. R. Bhavani Shankar
Abstract:
Radar simulation is a promising way to provide data-cube with effectiveness and accuracy for AI-based approaches to radar applications. This paper develops a channel simulator to generate frequency-modulated continuous-wave (FMCW) waveform multiple inputs multiple outputs (MIMO) radar signals. In the proposed simulation framework, an open-source animation tool called Blender is utilized to model t…
▽ More
Radar simulation is a promising way to provide data-cube with effectiveness and accuracy for AI-based approaches to radar applications. This paper develops a channel simulator to generate frequency-modulated continuous-wave (FMCW) waveform multiple inputs multiple outputs (MIMO) radar signals. In the proposed simulation framework, an open-source animation tool called Blender is utilized to model the scenarios and render animations. The ray tracing (RT) engine embedded can trace the radar propagation paths, i.e., the distance and signal strength of each path. The beat signal models of time division multiplexing (TDM)-MIMO are adapted to RT outputs. Finally, the environment-based models are simulated to show the validation.
△ Less
Submitted 18 July, 2023;
originally announced July 2023.
-
RIS-Aided Wideband Holographic DFRC
Authors:
Tong Wei,
Linlong Wu,
Kumar Vijay Mishra,
M. R. Bhavani Shankar
Abstract:
To enable non-line-of-sight (NLoS) sensing and communications, dual-function radar-communications (DFRC) systems have recently proposed employing reconfigurable intelligent surface (RIS) as a reflector in wireless media. However, in the dense environment and higher frequencies, severe propagation and attenuation losses are a hindrance for RIS-aided DFRC systems to utilize wideband processing. To t…
▽ More
To enable non-line-of-sight (NLoS) sensing and communications, dual-function radar-communications (DFRC) systems have recently proposed employing reconfigurable intelligent surface (RIS) as a reflector in wireless media. However, in the dense environment and higher frequencies, severe propagation and attenuation losses are a hindrance for RIS-aided DFRC systems to utilize wideband processing. To this end, we propose equip** the transceivers with the reconfigurable holographic surface (RHS) that, different from RIS, is a metasurface with an embedded connected feed deployed at the transceiver for greater control of the radiation amplitude. This surface is crucial for designing compact low-cost wideband wireless systems, wherein ultra-massive antenna arrays are required to compensate for the losses incurred by severe attenuation and diffraction. We consider a novel wideband DFRC system equipped with an RHS at the transceiver and a RIS reflector in the channel. We jointly design the digital, holographic, and passive beamformers to maximize the radar signal-to-interference-plus-noise ratio (SINR) while ensuring the communications SINR among all users. The resulting nonconvex optimization problem involves maximin objective, constant modulus, and difference of convex constraints. We develop an alternating maximization method to decouple and iteratively solve these subproblems. Numerical experiments demonstrate that the proposed method achieves better radar performance than non-RIS, random-RHS, and randomly configured RIS-aided DFRC systems.
△ Less
Submitted 8 May, 2023;
originally announced May 2023.
-
Improving Pulse-Compression Weather Radar via the Joint Design of Subpulses and Extended Mismatch Filter
Authors:
Linlong Wu,
Mohammad Alaee-Kerahroodi,
M. R. Bhavani Shankar
Abstract:
Pulse compression can enhance both the performance in range resolution and sensitivity for weather radar. However, it will introduce the issue of high sidelobes if not delicately implemented. Motivated by this fact, we focus on the pulse compression design for weather radar in this paper. Specifically, we jointly design both the subpulse codes and extended mismatch filter based on the alternating…
▽ More
Pulse compression can enhance both the performance in range resolution and sensitivity for weather radar. However, it will introduce the issue of high sidelobes if not delicately implemented. Motivated by this fact, we focus on the pulse compression design for weather radar in this paper. Specifically, we jointly design both the subpulse codes and extended mismatch filter based on the alternating direction method of multipliers (ADMM). This joint design will yield a pulse compression with low sidelobes, which equivalently implies a high signal-to-interference-plus-noise ratio (SINR) and a low estimation error on meteorological reflectivity. The experiment results demonstrate the efficacy of the proposed pulse compression strategy since its achieved meteorological reflectivity estimations are highly similar to the ground truth.
△ Less
Submitted 27 September, 2022;
originally announced September 2022.
-
Multi-IRS-Aided Doppler-Tolerant Wideband DFRC System
Authors:
Tong Wei,
Linlong Wu,
Kumar Vijay Mishra,
M. R. Bhavani Shankar
Abstract:
Intelligent reflecting surface (IRS) is recognized as an enabler of future dual-function radar-communications (DFRC) by improving spectral efficiency, coverage, parameter estimation, and interference suppression. Prior studies on IRS-aided DFRC focus either on narrowband processing, single-IRS deployment, static targets, non-clutter scenario, or on the under-utilized line-of-sight (LoS) and non-li…
▽ More
Intelligent reflecting surface (IRS) is recognized as an enabler of future dual-function radar-communications (DFRC) by improving spectral efficiency, coverage, parameter estimation, and interference suppression. Prior studies on IRS-aided DFRC focus either on narrowband processing, single-IRS deployment, static targets, non-clutter scenario, or on the under-utilized line-of-sight (LoS) and non-line-of-sight (NLoS) paths. In this paper, we address the aforementioned shortcomings by optimizing a wideband DFRC system comprising multiple IRSs and a dual-function base station that jointly processes the LoS and NLoS wideband multi-carrier signals to improve both the communications SINR and the radar SINR in the presence of a moving target and clutter. We formulate the transmit, {receive} and IRS beamformer design as the maximization of the worst-case radar signal-to-interference-plus-noise ratio (SINR) subject to transmit power and communications SINR. We tackle this nonconvex problem under the alternating optimization framework, where the subproblems are solved by a combination of Dinkelbach algorithm, consensus alternating direction method of multipliers, and Riemannian steepest decent. Our numerical experiments show that the proposed multi-IRS-aided wideband DFRC provides over $4$ dB radar SINR and $31.7$\% improvement in target detection over a single-IRS system.
△ Less
Submitted 10 August, 2023; v1 submitted 5 July, 2022;
originally announced July 2022.
-
The Rise of Intelligent Reflecting Surfaces in Integrated Sensing and Communications Paradigms
Authors:
Ahmet M. Elbir,
Kumar Vijay Mishra,
M. R. Bhavani Shankar,
Symeon Chatzinotas
Abstract:
The intelligent reflecting surface (IRS) alters the behavior of wireless media and, consequently, has potential to improve the performance and reliability of wireless systems such as communications and radar remote sensing. Recently, integrated sensing and communications (ISAC) has been widely studied as a means to efficiently utilize spectrum and thereby save cost and power. This article investig…
▽ More
The intelligent reflecting surface (IRS) alters the behavior of wireless media and, consequently, has potential to improve the performance and reliability of wireless systems such as communications and radar remote sensing. Recently, integrated sensing and communications (ISAC) has been widely studied as a means to efficiently utilize spectrum and thereby save cost and power. This article investigates the role of IRS in the future ISAC paradigms. While there is a rich heritage of recent research into IRS-assisted communications, the IRS-assisted radars and ISAC remain relatively unexamined. We discuss the putative advantages of IRS deployment, such as coverage extension, interference suppression, and enhanced parameter estimation, for both communications and radar. We introduce possible IRS-assisted ISAC scenarios with common and dedicated surfaces. The article provides an overview of related signal processing techniques and the design challenges, such as wireless channel acquisition, waveform design, and security.
△ Less
Submitted 20 December, 2022; v1 submitted 14 April, 2022;
originally announced April 2022.
-
MIMO Radar Transmit Beampattern Sha** for Spectrally Dense Environments
Authors:
Ehsan Raei,
Saeid Sedighi,
Mohammad Alaee-Kerahroodi,
M. R. Bhavani Shankar
Abstract:
Designing unimodular waveforms with a desired beampattern, spectral occupancy and orthogonality level is of vital importance in the next generation Multiple-Input Multiple-Output (MIMO) radar systems. Motivated by this fact, in this paper, we propose a framework for sha** the beampattern in MIMO radar systems under the constraints simultaneously ensuring unimodularity, desired spectral occupancy…
▽ More
Designing unimodular waveforms with a desired beampattern, spectral occupancy and orthogonality level is of vital importance in the next generation Multiple-Input Multiple-Output (MIMO) radar systems. Motivated by this fact, in this paper, we propose a framework for sha** the beampattern in MIMO radar systems under the constraints simultaneously ensuring unimodularity, desired spectral occupancy and orthogonality of the designed waveform. In this manner, the proposed framework is the most comprehensive approach for MIMO radar waveform design focusing on beampattern sha**. The problem formulation leads to a non-convex quadratic fractional programming. We propose an effective iterative to solve the problem, where each iteration is composed of a Semi-Definite Programming (SDP) followed by eigenvalue decomposition. Some numerical simulations are provided to illustrate the superior performance of our proposed over the state-of-the-art.
△ Less
Submitted 13 December, 2021;
originally announced December 2021.
-
Sparse Array Beampattern Synthesis via Majorization-Based ADMM
Authors:
Tong Wei,
Linlong Wu,
M. R. Bhavani Shankar
Abstract:
Beampattern synthesis is a key problem in many wireless applications. With the increasing scale of MIMO antenna array, it is highly desired to conduct beampattern synthesis on a sparse array to reduce the power and hardware cost. In this paper, we consider conducting beampattern synthesis and sparse array construction jointly. In the formulated problem, the beampattern synthesis is designed by min…
▽ More
Beampattern synthesis is a key problem in many wireless applications. With the increasing scale of MIMO antenna array, it is highly desired to conduct beampattern synthesis on a sparse array to reduce the power and hardware cost. In this paper, we consider conducting beampattern synthesis and sparse array construction jointly. In the formulated problem, the beampattern synthesis is designed by minimizing the matching error to the beampattern template, and the Shannon entropy function is first introduced to impose the sparsity of the array. Then, for this nonconvex problem, an iterative method is proposed by leveraging on the alternating direction multiplier method (ADMM) and the majorization minimization (MM). Simulation results demonstrate that, compared with the benchmark, our approach achieves a good trade-off between array sparsity and beampattern matching error with less runtime.
△ Less
Submitted 4 June, 2021; v1 submitted 9 April, 2021;
originally announced April 2021.
-
Design of MIMO Radar Waveforms based on lp-Norm Criteria
Authors:
Ehsan Raei,
Mohammad Alaee-Kerahroodi,
Prabhu Babu,
M. R. Bhavani Shankar
Abstract:
Multiple-input multiple-output (MIMO) radars transmit a set of sequences that exhibit small cross-correlation sidelobes, to enhance sensing performance by separating them at the matched filter outputs. The waveforms also require small auto-correlation sidelobes to avoid masking of weak targets by the range sidelobes of strong targets and to mitigate deleterious effects of distributed clutter. In l…
▽ More
Multiple-input multiple-output (MIMO) radars transmit a set of sequences that exhibit small cross-correlation sidelobes, to enhance sensing performance by separating them at the matched filter outputs. The waveforms also require small auto-correlation sidelobes to avoid masking of weak targets by the range sidelobes of strong targets and to mitigate deleterious effects of distributed clutter. In light of these requirements, in this paper, we design a set of phase-only (constant modulus) sequences that exhibit near-optimal properties in terms of Peak Sidelobe Level (PSL) and Integrated Sidelobe Level (ISL). At the design stage, we adopt weighted lp-norm of auto- and cross-correlation sidelobes as the objective function and minimize it for a general p value, using block successive upper bound minimization (BSUM). Considering the limitation of radar amplifiers, we design unimodular sequences which make the design problem non-convex and NP-hard. To tackle the problem, in every iteration of the BSUM algorithm, we introduce different local approximation functions and optimize them concerning a block, containing a code entry or a code vector. The numerical results show that the performance of the optimized set of sequences outperforms the state-of-the-art counterparts, in both terms of PSL values and computational time.
△ Less
Submitted 7 April, 2021;
originally announced April 2021.
-
Spatial- and Range- ISLR Trade-off in MIMO Radar via Waveform Correlation Optimization
Authors:
Ehsan Raei,
Mohammad Alaee-Kerahrood,
M. R. Bhavani Shankar
Abstract:
This paper aims to design a set of transmitting waveforms in cognitive colocated Multi-Input Multi-Output (MIMO) radar systems considering the simultaneous minimization of spatial- and the range- Integrated Sidelobe Level Ratio (ISLR). The design problem is formulated as a bi-objective Pareto optimization under practical constraints on the waveforms, namely total transmit power, peak-to-average-po…
▽ More
This paper aims to design a set of transmitting waveforms in cognitive colocated Multi-Input Multi-Output (MIMO) radar systems considering the simultaneous minimization of spatial- and the range- Integrated Sidelobe Level Ratio (ISLR). The design problem is formulated as a bi-objective Pareto optimization under practical constraints on the waveforms, namely total transmit power, peak-to-average-power ratio (PAR), constant modulus, and discrete phase alphabet. A Coordinate Descent (CD) based approach is proposed, in which at every single variable update of the algorithm we obtain the solution of the uni-variable optimization problems. The novelty of the paper comes from deriving a flexible waveform design problem applicable for 4D imaging MIMO radars which is optimized directly over the different constraint sets. The simultaneous optimization leads to a trade-off between the two ISLRs and the simulation results illustrate significantly improved trade-off offered by the proposed methodologies.
△ Less
Submitted 8 March, 2021;
originally announced March 2021.
-
On the Performance of One-Bit DoA Estimation via Sparse Linear Arrays
Authors:
Saeid Sedighi,
M. R. Bhavani Shankar,
Mojtaba Soltanalian,
Björn Ottersten
Abstract:
Direction of Arrival (DoA) estimation using Sparse Linear Arrays (SLAs) has recently gained considerable attention in array processing thanks to their capability to provide enhanced degrees of freedom in resolving uncorrelated source signals. Additionally, deployment of one-bit Analog-to-Digital Converters (ADCs) has emerged as an important topic in array processing, as it offers both a low-cost a…
▽ More
Direction of Arrival (DoA) estimation using Sparse Linear Arrays (SLAs) has recently gained considerable attention in array processing thanks to their capability to provide enhanced degrees of freedom in resolving uncorrelated source signals. Additionally, deployment of one-bit Analog-to-Digital Converters (ADCs) has emerged as an important topic in array processing, as it offers both a low-cost and a low-complexity implementation. In this paper, we study the problem of DoA estimation from one-bit measurements received by an SLA. Specifically, we first investigate the identifiability conditions for the DoA estimation problem from one-bit SLA data and establish an equivalency with the case when DoAs are estimated from infinite-bit unquantized measurements. Towards determining the performance limits of DoA estimation from one-bit quantized data, we derive a pessimistic approximation of the corresponding Cramér-Rao Bound (CRB). This pessimistic CRB is then used as a benchmark for assessing the performance of one-bit DoA estimators. We also propose a new algorithm for estimating DoAs from one-bit quantized data. We investigate the analytical performance of the proposed method through deriving a closed-form expression for the covariance matrix of the asymptotic distribution of the DoA estimation errors and show that it outperforms the existing algorithms in the literature. Numerical simulations are provided to validate the analytical derivations and corroborate the resulting performance improvement.
△ Less
Submitted 20 October, 2021; v1 submitted 27 December, 2020;
originally announced December 2020.
-
Localization with One-Bit Passive Radars in Narrowband Internet-of-Things using Multivariate Polynomial Optimization
Authors:
Saeid Sedighi,
Kumar Vijay Mishra,
M. R. Bhavani Shankar,
Björn Ottersten
Abstract:
Several Internet-of-Things (IoT) applications provide location-based services, wherein it is critical to obtain accurate position estimates by aggregating information from individual sensors. In the recently proposed narrowband IoT (NB-IoT) standard, which trades off bandwidth to gain wide coverage, the location estimation is compounded by the low sampling rate receivers and limited-capacity links…
▽ More
Several Internet-of-Things (IoT) applications provide location-based services, wherein it is critical to obtain accurate position estimates by aggregating information from individual sensors. In the recently proposed narrowband IoT (NB-IoT) standard, which trades off bandwidth to gain wide coverage, the location estimation is compounded by the low sampling rate receivers and limited-capacity links. We address both of these NB-IoT drawbacks in the framework of passive sensing devices that receive signals from the target-of-interest. We consider the limiting case where each node receiver employs one-bit analog-to-digital-converters and propose a novel low-complexity nodal delay estimation method using constrained-weighted least squares minimization. To support the low-capacity links to the fusion center (FC), the range estimates obtained at individual sensors are then converted to one-bit data. At the FC, we propose target localization with the aggregated one-bit range vector using both optimal and sub-optimal techniques. The computationally expensive former approach is based on Lasserre's method for multivariate polynomial optimization while the latter employs our less complex iterative joint r\textit{an}ge-\textit{tar}get location \textit{es}timation (ANTARES) algorithm. Our overall one-bit framework not only complements the low NB-IoT bandwidth but also supports the design goal of inexpensive NB-IoT location sensing. Numerical experiments demonstrate feasibility of the proposed one-bit approach with a $0.6$\% increase in the normalized localization error for the small set of $20$-$60$ nodes over the full-precision case. When the number of nodes is sufficiently large ($>80$), the one-bit methods yield the same performance as the full precision.
△ Less
Submitted 9 April, 2021; v1 submitted 29 July, 2020;
originally announced July 2020.
-
A Family of Deep Learning Architectures for Channel Estimation and Hybrid Beamforming in Multi-Carrier mm-Wave Massive MIMO
Authors:
Ahmet M. Elbir,
Kumar Vijay Mishra,
M. R. Bhavani Shankar,
Björn Ottersten
Abstract:
Hybrid analog and digital beamforming transceivers are instrumental in addressing the challenge of expensive hardware and high training overheads in the next generation millimeter-wave (mm-Wave) massive MIMO (multiple-input multiple-output) systems. However, lack of fully digital beamforming in hybrid architectures and short coherence times at mm-Wave impose additional constraints on the channel e…
▽ More
Hybrid analog and digital beamforming transceivers are instrumental in addressing the challenge of expensive hardware and high training overheads in the next generation millimeter-wave (mm-Wave) massive MIMO (multiple-input multiple-output) systems. However, lack of fully digital beamforming in hybrid architectures and short coherence times at mm-Wave impose additional constraints on the channel estimation. Prior works on addressing these challenges have focused largely on narrowband channels wherein optimization-based or greedy algorithms were employed to derive hybrid beamformers. In this paper, we introduce a deep learning (DL) approach for channel estimation and hybrid beamforming for frequency-selective, wideband mm-Wave systems. In particular, we consider a massive MIMO Orthogonal Frequency Division Multiplexing (MIMO-OFDM) system and propose three different DL frameworks comprising convolutional neural networks (CNNs), which accept the raw data of received signal as input and yield channel estimates and the hybrid beamformers at the output. We also introduce both offline and online prediction schemes. Numerical experiments demonstrate that, compared to the current state-of-the-art optimization and DL methods, our approach provides higher spectral efficiency, lesser computational cost and fewer number of pilot signals, and higher tolerance against the deviations in the received pilot data, corrupted channel matrix, and propagation environment.
△ Less
Submitted 3 January, 2022; v1 submitted 20 December, 2019;
originally announced December 2019.
-
Signal Processing for High Throughput Satellite Systems: Challenges in New Interference-Limited Scenarios
Authors:
Ana I. Perez-Neira,
Miguel Angel Vazquez,
Sina Maleki,
M. R. Bhavani Shankar,
Symeon Chatzinotas
Abstract:
The field of satellite communications is enjoying a renewed interest in the global telecom market, and very high throughput satellites (V/HTS), with their multiple spot-beams, are key for delivering the future rate demands. In this article, the state-of-the-art and open research challenges of signal processing techniques for V/HTS systems are presented for the first time, with focus on novel appro…
▽ More
The field of satellite communications is enjoying a renewed interest in the global telecom market, and very high throughput satellites (V/HTS), with their multiple spot-beams, are key for delivering the future rate demands. In this article, the state-of-the-art and open research challenges of signal processing techniques for V/HTS systems are presented for the first time, with focus on novel approaches for efficient interference mitigation. The main signal processing topics for the ground, satellite, and user segment are addressed. Also, the critical components for the integration of satellite and terrestrial networks are studied, such as cognitive satellite systems and satellite-terrestrial backhaul for caching. All the reviewed techniques are essential in empowering satellite systems to support the increasing demands of the upcoming generation of communication networks.
△ Less
Submitted 12 February, 2018;
originally announced February 2018.
