-
Enhanced Imaging of Electronic Hot Spots Using Quantum Squeezed Light
Authors:
Haechan An,
Ali Najjar Amiri,
Dominic P. Goronzy,
David A. Garcia Wetten,
Michael J. Bedzyk,
Ali Shakouri,
Mark C. Hersam,
Mahdi Hosseini
Abstract:
Detecting electronic hot spots is important for understanding the heat dissipation and thermal management of electronic and semiconductor devices. Optical thermoreflective imaging is being used to perform precise temporal and spatial imaging of heat on wires and semiconductor materials. We apply quantum squeezed light to perform thermoreflective imaging on micro-wires, surpassing the shot-noise li…
▽ More
Detecting electronic hot spots is important for understanding the heat dissipation and thermal management of electronic and semiconductor devices. Optical thermoreflective imaging is being used to perform precise temporal and spatial imaging of heat on wires and semiconductor materials. We apply quantum squeezed light to perform thermoreflective imaging on micro-wires, surpassing the shot-noise limit of classical approaches. We obtain a far-field temperature sensing accuracy of 42 mK after 50 ms of averaging and show that a $256\times256$ pixel image can be constructed with such sensitivity in 10 minutes. We can further obtain single-shot temperature sensing of 1.6 K after only 10 $\mathrm{μs}$ of averaging enabling dynamical study of heat dissipation. Not only do the quantum images provide accurate spatio-temporal information about heat distribution, but the measure of quantum correlation provides additional information, inaccessible by classical techniques, that can lead to a better understanding of the dynamics. We apply the technique to both Al and Nb microwires and discuss the applications of the technique in studying electron dynamics at low temperatures.
△ Less
Submitted 22 March, 2024;
originally announced March 2024.
-
System Identification Using Energy-Bounded Noise Models: A Full Characterization of Chebyshev Centers and Radii
Authors:
Amir Shakouri,
Henk J. van Waarde,
M. Kanat Camlibel
Abstract:
This paper studies the identification of linear time-invariant systems using noisy input-output data in a set-membership framework. It is assumed that the noise sequence belongs to a bounded set, induced by a quadratic matrix inequality, that allows for capturing various energy-bounded noise models. In this framework, the identification problem is to find an estimation for the true system so that…
▽ More
This paper studies the identification of linear time-invariant systems using noisy input-output data in a set-membership framework. It is assumed that the noise sequence belongs to a bounded set, induced by a quadratic matrix inequality, that allows for capturing various energy-bounded noise models. In this framework, the identification problem is to find an estimation for the true system so that the worst-case estimation error with respect to a given norm is minimized. For such a problem, we present closed-form solutions with respect to arbitrary unitarily invariant matrix norms. Examples of these norms include the Frobenius norm, spectral norm, nuclear norm, Schatten p-norms, and Ky Fan k-norms.
△ Less
Submitted 12 May, 2024; v1 submitted 8 March, 2024;
originally announced March 2024.
-
An Open Dataset of Sensor Data from Soil Sensors and Weather Stations at Production Farms
Authors:
Charilaos Mousoulis,
Pengcheng Wang,
Nguyen Luu Do,
Jose F Waimin,
Nithin Raghunathan,
Rahim Rahimi,
Ali Shakouri,
Saurabh Bagchi
Abstract:
Weather and soil conditions are particularly important when it comes to farming activities. Study of these factors and their role in nutrient and nitrate absorption rates can lead to useful insights with benefits for both the crop yield and the protection of the environment through the more controlled use of fertilizers and chemicals. There is a paucity of public data from rural, agricultural sens…
▽ More
Weather and soil conditions are particularly important when it comes to farming activities. Study of these factors and their role in nutrient and nitrate absorption rates can lead to useful insights with benefits for both the crop yield and the protection of the environment through the more controlled use of fertilizers and chemicals. There is a paucity of public data from rural, agricultural sensor networks. This is partly due to the unique challenges faced during the deployment and maintenance of IoT networks in rural agricultural areas. As part of a 5-year project called WHIN we have been deploying and collecting sensor data from production and experimental agricultural farms in and around Purdue University in Indiana. Here we release a dataset comprising soil sensor data from a representative sample of 3 nodes across 3 production farms, each for 5 months. We correlate this data with the weather data and draw some insights about the absorption of rain in the soil. We provide the dataset at: https://purduewhin.ecn.purdue.edu/dataset2021.
△ Less
Submitted 16 February, 2023;
originally announced February 2023.
-
A Gate-All-Around Single-Channel In2O3 Nanoribbon FET with Near 20 mA/μm Drain Current
Authors:
Zhuocheng Zhang,
Zehao Lin,
Pai-Ying Liao,
Vahid Askarpour,
Hongyi Dou,
Zhongxia Shang,
Adam Charnas,
Mengwei Si,
Sami Alajlouni,
**hyun Noh,
Ali Shakouri,
Haiyan Wang,
Mark Lundstrom,
Jesse Maassen,
Peide D. Ye
Abstract:
In this work, we demonstrate atomic-layer-deposited (ALD) single-channel indium oxide (In2O3) gate-all-around (GAA) nanoribbon FETs in a back-end-of-line (BEOL) compatible process. A maximum on-state current (ION) of 19.3 mA/μm (near 20 mA/μm) is achieved in an In2O3 GAA nanoribbon FET with a channel thickness (TIO) of 3.1 nm, channel length (Lch) of 40 nm, channel width (Wch) of 30 nm and dielect…
▽ More
In this work, we demonstrate atomic-layer-deposited (ALD) single-channel indium oxide (In2O3) gate-all-around (GAA) nanoribbon FETs in a back-end-of-line (BEOL) compatible process. A maximum on-state current (ION) of 19.3 mA/μm (near 20 mA/μm) is achieved in an In2O3 GAA nanoribbon FET with a channel thickness (TIO) of 3.1 nm, channel length (Lch) of 40 nm, channel width (Wch) of 30 nm and dielectric HfO2 of 5 nm. The record high drain current obtained from an In2O3 FET is about one order of magnitude higher than any conventional single-channel semiconductor FETs. This extraordinary drain current and its related on-state performance demonstrate ALD In2O3 is a promising oxide semiconductor channel with great opportunities in BEOL compatible monolithic 3D integration.
△ Less
Submitted 30 April, 2022;
originally announced May 2022.
-
On the prescribed-time attractivity and frozen-time eigenvalues of linear time-varying systems
Authors:
Amir Shakouri
Abstract:
A system is called prescribed-time attractive if its solution converges at an arbitrary user-defined finite time. In this note, necessary and sufficient conditions are developed for the prescribed-time attractivity of linear time-varying (LTV) systems. It is proved that the frozen-time eigenvalues of a prescribed-time attractive LTV system have negative real parts when the time is sufficiently clo…
▽ More
A system is called prescribed-time attractive if its solution converges at an arbitrary user-defined finite time. In this note, necessary and sufficient conditions are developed for the prescribed-time attractivity of linear time-varying (LTV) systems. It is proved that the frozen-time eigenvalues of a prescribed-time attractive LTV system have negative real parts when the time is sufficiently close to the convergence moment. This result shows that the ubiquitous singularity problem of prescribed-time attractive LTV systems can be avoided without instability effects by switching to the corresponding frozen-time system at an appropriate time. Consequently, it is proved that the time-varying state-feedback gain of a prescribed-time controller, designed for an unknown linear time-invariant system, approaches the set of stabilizing constant state-feedback gains.
△ Less
Submitted 22 December, 2021;
originally announced December 2021.
-
A Framework for Prescribed-Time Control Design via Time-Scale Transformation
Authors:
Amir Shakouri,
Nima Assadian
Abstract:
This letter presents a unified framework for the design of prescribed-time controllers under time-varying input and state constraints for normal-form unknown nonlinear systems with uncertain input gain. The proposed approach is based on a time-domain map** method by which any infinite-time system can be corresponded to a prescribed-time system and vice versa. It is shown that the design of a con…
▽ More
This letter presents a unified framework for the design of prescribed-time controllers under time-varying input and state constraints for normal-form unknown nonlinear systems with uncertain input gain. The proposed approach is based on a time-domain map** method by which any infinite-time system can be corresponded to a prescribed-time system and vice versa. It is shown that the design of a constrained nonasymptotic prescribed-time controller can be reduced to the asymptotic control design for an associated constrained infinite-time system. Faà di Bruno's formula and Bell polynomials are used for a constructive representation of the associated infinite-time system. The presented results are not confined to a particular map** function, which adds to the flexibility of the proposed scheme. It is shown that necessary and sufficient conditions on the uniform (practical) prescribed-time stability and attractivity can be obtained as corollaries of the main result.
△ Less
Submitted 15 December, 2021;
originally announced December 2021.
-
Prescribed-time control with linear decay for nonlinear systems
Authors:
Amir Shakouri,
Nima Assadian
Abstract:
In this letter, a new notion of stability is introduced, which is called triangular stability. A system is called triangularly stable if the norm of its state vector is bounded by a decreasing linear function of time such that its intersection point with the time axis can be arbitrarily commanded by the user. Triangular stability implies prescribed-time stability, which means that the nonlinear sy…
▽ More
In this letter, a new notion of stability is introduced, which is called triangular stability. A system is called triangularly stable if the norm of its state vector is bounded by a decreasing linear function of time such that its intersection point with the time axis can be arbitrarily commanded by the user. Triangular stability implies prescribed-time stability, which means that the nonlinear system is converged to zero equilibrium at an arbitrary finite time. A prescribed-time controller with guaranteed triangular stability is developed for normal form nonlinear systems with uncertain input gain, which is able to reject the disturbances and unmodeled dynamics. Numerical simulations are carried out to visualize the results for second and fourth-order systems.
△ Less
Submitted 14 April, 2021;
originally announced April 2021.
-
Hybrid Low-Power Wide-Area Mesh Network for IoT Applications
Authors:
Xiaofan Jiang,
Heng zhang,
Edgardo Alberto Barsallo Yi,
Nithin Raghunathan,
Charilaos Mousoulis,
Somali Chaterji,
Dimitrios Peroulis,
Ali Shakouri,
Saurabh Bagchi
Abstract:
The recent advancement of the Internet of Things (IoT) enables the possibility of data collection from diverse environments using IoT devices. However, despite the rapid advancement of low-power communication technologies, the deployment of IoT networks still faces many challenges. In this paper, we propose a hybrid, low-power, wide-area network (LPWAN) structure that can achieve wide-area communi…
▽ More
The recent advancement of the Internet of Things (IoT) enables the possibility of data collection from diverse environments using IoT devices. However, despite the rapid advancement of low-power communication technologies, the deployment of IoT networks still faces many challenges. In this paper, we propose a hybrid, low-power, wide-area network (LPWAN) structure that can achieve wide-area communication coverage and low power consumption on IoT devices by utilizing both sub-GHz long-range radio and 2.4 GHz short-range radio. Specifically, we constructed a low-power mesh network with LoRa, a physical-layer standard that can provide long-range (kilometers) point-to-point communication using custom time-division multiple access (TDMA). Furthermore, we extended the capabilities of the mesh network by enabling ANT, an ultra-low-power, short-range communication protocol to satisfy data collection in dense device deployments. Third, we demonstrate the performance of the hybrid network with two real-world deployments at the Purdue University campus and at the university-owned farm. The results suggest that both networks have superior advantages in terms of cost, coverage, and power consumption vis-à-vis other IoT solutions, like LoRaWAN.
△ Less
Submitted 22 June, 2020;
originally announced June 2020.
-
Context-Aware Collaborative-Intelligence with Spatio-Temporal In-Sensor-Analytics in a Large-Area IoT Testbed
Authors:
Baibhab Chatterjee,
Dong-Hyun Seo,
Shramana Chakraborty,
Shitij Avlani,
Xiaofan Jiang,
Heng Zhang,
Mustafa Abdallah,
Nithin Raghunathan,
Charilaos Mousoulis,
Ali Shakouri,
Saurabh Bagchi,
Dimitrios Peroulis,
Shreyas Sen
Abstract:
Decades of continuous scaling has reduced the energy of unit computing to virtually zero, while energy-efficient communication has remained the primary bottleneck in achieving fully energy-autonomous IoT nodes. This paper presents and analyzes the trade-offs between the energies required for communication and computation in a wireless sensor network, deployed in a mesh architecture over a 2400-acr…
▽ More
Decades of continuous scaling has reduced the energy of unit computing to virtually zero, while energy-efficient communication has remained the primary bottleneck in achieving fully energy-autonomous IoT nodes. This paper presents and analyzes the trade-offs between the energies required for communication and computation in a wireless sensor network, deployed in a mesh architecture over a 2400-acre university campus, and is targeted towards multi-sensor measurement of temperature, humidity and water nitrate concentration for smart agriculture. Several scenarios involving In-Sensor-Analytics (ISA), Collaborative Intelligence (CI) and Context-Aware-Switching (CAS) of the cluster-head during CI has been considered. A real-time co-optimization algorithm has been developed for minimizing the energy consumption in the network, hence maximizing the overall battery lifetime of individual nodes. Measurement results show that the proposed ISA consumes ~467X lower energy as compared to traditional Bluetooth Low Energy (BLE) communication, and ~69,500X lower energy as compared with Long Range (LoRa) communication. When the ISA is implemented in conjunction with LoRa, the lifetime of the node increases from a mere 4.3 hours to 66.6 days with a 230 mAh coin cell battery, while preserving more than 98% of the total information. The CI and CAS algorithms help in extending the worst-case node lifetime by an additional 50%, thereby exhibiting an overall network lifetime of ~104 days, which is >90% of the theoretical limits as posed by the leakage currents present in the system, while effectively transferring information sampled every second. A web-based monitoring system was developed to archive the measured data in a continuous manner, and to report anomalies in the measured data.
△ Less
Submitted 4 November, 2020; v1 submitted 26 May, 2020;
originally announced May 2020.
-
Multiple-impulse orbital maneuver with limited observation window
Authors:
Amir Shakouri,
Seid H. Pourtakdoust,
Mohammad Sayanjali
Abstract:
This paper proposes a solution for multiple-impulse orbital maneuvers near circular orbits for special cases where orbital observations are not globally available and the spacecraft is being observed through a limited window from a ground or a space-based station. The current study is particularly useful for small private launching companies with limited access to global observations around the Ea…
▽ More
This paper proposes a solution for multiple-impulse orbital maneuvers near circular orbits for special cases where orbital observations are not globally available and the spacecraft is being observed through a limited window from a ground or a space-based station. The current study is particularly useful for small private launching companies with limited access to global observations around the Earth and/or for orbital maneuvers around other planets for which the orbital observations are limited to the in situ equipment. An appropriate cost function is introduced for the sake of minimizing the total control/impulse effort as well as the orbital uncertainty. It is subsequently proved that for a circle-to-circle maneuver, the optimization problem is quasi-convex with respect to the design variables. For near circular trajectories the same cost function is minimized via a gradient based optimization algorithm in order to provide a sub-optimal solution that is efficient both with respect to energy effort and orbital uncertainty. As a relevant case study, a four-impulse orbital maneuver between circular orbits under Mars gravitation is simulated and analyzed to demonstrate the effectiveness of the proposed algorithm.
△ Less
Submitted 27 April, 2020;
originally announced April 2020.
-
Suboptimal Control of Unknown Second-order Nonlinear Systems with Guaranteed Global Convergence
Authors:
Amir Shakouri,
M. Reza Emami
Abstract:
A suboptimal active disturbance rejection controller (S-ADRC) is proposed for second-order systems with unknown time-varying nonlinear dynamics. The output-feedback controller guarantees a global convergence to the vicinity of an optimal solution by means of dynamic control gains, based on the estimated main and extended state variables obtained through a high-gain observer. Three numerical exampl…
▽ More
A suboptimal active disturbance rejection controller (S-ADRC) is proposed for second-order systems with unknown time-varying nonlinear dynamics. The output-feedback controller guarantees a global convergence to the vicinity of an optimal solution by means of dynamic control gains, based on the estimated main and extended state variables obtained through a high-gain observer. Three numerical examples compare the performance of the proposed control scheme applied to linear and nonlinear systems with that of a fixed-gain conventional ADRC as well as several model-based optimal and suboptimal controllers.
△ Less
Submitted 20 June, 2022; v1 submitted 23 February, 2020;
originally announced February 2020.
-
Prescribed-time Control for Perturbed Euler-Lagrange Systems with Obstacle Avoidance
Authors:
Amir Shakouri,
Nima Assadian
Abstract:
This paper introduces a class of time-varying controllers for Euler-Lagrange systems such that the convergence occurs at an arbitrary finite time, independently of initial conditions, and free of chattering. The proposed controller is based on a map** technique and is designed in two steps: First, a conventional (obstacle avoidance) asymptotically stable controller is specified for the nominal s…
▽ More
This paper introduces a class of time-varying controllers for Euler-Lagrange systems such that the convergence occurs at an arbitrary finite time, independently of initial conditions, and free of chattering. The proposed controller is based on a map** technique and is designed in two steps: First, a conventional (obstacle avoidance) asymptotically stable controller is specified for the nominal system; then, by a simple substitution, a prescribed-time (obstacle avoidance) controller is achievable for the perturbed system. It is proved that the proposed scheme is uniformly prescribed-time stable for unperturbed systems and prescribed-time attractive for perturbed systems as it rejects matched disturbances with unknown upper bounds without disturbance observation. As an example, a two-link robot manipulator is considered for numerical simulations.
△ Less
Submitted 18 August, 2021; v1 submitted 18 October, 2019;
originally announced October 2019.
-
Relativistic stable processes in quasi-ballistic heat conduction in thin film semiconductors
Authors:
Prakash Chakraborty,
Bjorn Vermeersch,
Ali Shakouri,
Samy Tindel
Abstract:
In this article, we show how relativistic alpha stable processes can be used to explain quasi-ballistic heat conduction in semiconductors. This is a method that can fit experimental results of ultrafast laser heating in alloys. It also provides a connection to a rich literature on Feynman-Kac formalism and random processes that transition from a stable Lévy process on short time and length scales…
▽ More
In this article, we show how relativistic alpha stable processes can be used to explain quasi-ballistic heat conduction in semiconductors. This is a method that can fit experimental results of ultrafast laser heating in alloys. It also provides a connection to a rich literature on Feynman-Kac formalism and random processes that transition from a stable Lévy process on short time and length scales to the Brownian motion at larger scales. This transition was captured by a heuristic truncated Lévy distribution in earlier papers. The rigorous Feynman-Kac approach is used to derive sharp bounds for the transition kernel. Future directions are briefly discussed.
△ Less
Submitted 29 July, 2019;
originally announced July 2019.
-
A New Shape-based Multiple-impulse Strategy for Coplanar Orbital Maneuvers
Authors:
Amir Shakouri,
Maryam Kiani,
Seid H. Pourtakdoust
Abstract:
A new shape-based geometric method (SBGM) is proposed for generation of multi-impulse transfer trajectories between arbitrary coplanar oblique orbits via a heuristic algorithm. The key advantage of the proposed SBGM includes a significant reduction in the number of design variables for an N-impulse orbital maneuver leading to a lower computational effort and energy requirement. The SBGM generates…
▽ More
A new shape-based geometric method (SBGM) is proposed for generation of multi-impulse transfer trajectories between arbitrary coplanar oblique orbits via a heuristic algorithm. The key advantage of the proposed SBGM includes a significant reduction in the number of design variables for an N-impulse orbital maneuver leading to a lower computational effort and energy requirement. The SBGM generates a smooth transfer trajectory by joining a number of confocal elliptic arcs such that the intersections share common tangent directions. It is proven that the well-known classic Hohmann transfer and its bi-elliptic counterpart between circular orbits are special cases of the proposed SBGM. The performance and efficiency of the proposed approach is evaluated via computer simulations whose results are compared with those of optimal Lambert maneuver and traditional methods. The results demonstrate a good compatibility and superiority of the proposed SBGM in terms of required energy effort and computational efficiency.
△ Less
Submitted 11 May, 2019;
originally announced May 2019.
-
Homogenous $In_{x}Ga_{1-x}N$ alloys on ZnO substrates: A new approach for high performance thermoelectric materials
Authors:
Yining Feng,
Evan Witkoske,
Bahadir Kucukgok,
Yee Rui Koh,
Ali Shakouri,
Ian T. Ferguson,
Na Lu
Abstract:
High performance thermoelectric materials for wide-range temperature applications still remains a challenge. In this study, we have produced high-quality homogeneous $In_{0.32}Ga_{0.68}N$ on ZnO substrates, with no phase separation at high Indium content, using metal organic chemical vapor deposition for thermoelectric applications. A record high room temperature figure of merit zT is obtained of…
▽ More
High performance thermoelectric materials for wide-range temperature applications still remains a challenge. In this study, we have produced high-quality homogeneous $In_{0.32}Ga_{0.68}N$ on ZnO substrates, with no phase separation at high Indium content, using metal organic chemical vapor deposition for thermoelectric applications. A record high room temperature figure of merit zT is obtained of 0.86, which is five times larger than that of SiGe, the current state of the art high temperature thermoelectric material. These materials are shown to have a nearly perfect do** concentration to maximize zT regardless of the scattering mechanism. This almost one order of magnitude increase in zT is due to large electrical conductivities from oxygen co-do** as well as low thermal conductivities from alloy scattering. The maximum power factor reached was $77.98x10^{-4} W/mK^{2}$ at 300K for $In_{0.32}Ga_{0.68}N$ alloys at a carrier concentration $~6.25x10^{20} cm^{-3}$. This work indicates that $In_{x}Ga_{1-x}N$ alloys have great potential for thermoelectric applications especially at a high temperature range.
△ Less
Submitted 24 July, 2019; v1 submitted 9 May, 2019;
originally announced May 2019.
-
Covariance-Based Multiple-Impulse Rendezvous Design
Authors:
Amir Shakouri,
Maryam Kiani,
Seid H. Pourtakdoust
Abstract:
A novel trajectory design methodology is proposed in the current work to minimize the state uncertainty in the crucial mission of spacecraft rendezvous. The trajectory is shaped under constraints utilizing a multiple-impulse approach. State uncertainty is characterized in terms of covariance, and the impulse time as the only affective parameter in uncertainty propagation is selected to minimize th…
▽ More
A novel trajectory design methodology is proposed in the current work to minimize the state uncertainty in the crucial mission of spacecraft rendezvous. The trajectory is shaped under constraints utilizing a multiple-impulse approach. State uncertainty is characterized in terms of covariance, and the impulse time as the only affective parameter in uncertainty propagation is selected to minimize the trace of the covariance matrix. Further, the impulse location is also adopted as the other design parameter to satisfy various translational constraints of the space mission. Efficiency and viability of the proposed idea have been investigated through some scenarios that include constraints on final time, control effort, and maximum thruster limit addition to considering safe corridors. The obtained results show that proper selection of the impulse time and impulse position fulfils a successful feasible rendezvous mission with minimum uncertainty.
△ Less
Submitted 29 November, 2018;
originally announced November 2018.
-
On the Impulsive Formation Control of Spacecraft Under Path Constraints
Authors:
Amir Shakouri
Abstract:
This paper deals with the impulsive formation control of spacecraft in the presence of constraints on the position vector and time. Determining a set of path constraints can increase the safety and reliability in an impulsive relative motion of spacecraft. Specially, the feasibility problem of the position norm constraints is considered in this paper. Under assumptions, it is proved that if a posi…
▽ More
This paper deals with the impulsive formation control of spacecraft in the presence of constraints on the position vector and time. Determining a set of path constraints can increase the safety and reliability in an impulsive relative motion of spacecraft. Specially, the feasibility problem of the position norm constraints is considered in this paper. Under assumptions, it is proved that if a position vector be reachable, then the reach time and the corresponding time of impulses are unique. The trajectory boundedness of the spacecraft between adjacent impulses are analyzed using the Gerschgorin and the RayleighRitz theorems as well as a finite form of the Jensen's inequality. Some boundaries are introduced regarding the Jordan-Brouwer separation theorem which are useful in checking the satisfaction of a constraint. Two numerical examples (approximate circular formation kee** and collision-free maneuver) are solved in order to show the applications and visualize the results.
△ Less
Submitted 24 February, 2019; v1 submitted 20 November, 2018;
originally announced November 2018.
-
Ultrafast Chemical Imaging by Widefield Photothermal Sensing of Infrared Absorption
Authors:
Yeran Bai,
Delong Zhang,
Lu Lan,
Yimin Huang,
Kerry Maize,
Ali Shakouri,
Ji-Xin Cheng
Abstract:
Infrared (IR) imaging has become a viable tool for visualizing various chemical bonds in a specimen. The performance, however, is limited in terms of spatial resolution and imaging speed. Here, instead of measuring the loss of the IR beam, we utilize a pulsed visible light for a high-throughput, widefield sensing of the transient photothermal effect induced by absorption of single mid-IR pulses. T…
▽ More
Infrared (IR) imaging has become a viable tool for visualizing various chemical bonds in a specimen. The performance, however, is limited in terms of spatial resolution and imaging speed. Here, instead of measuring the loss of the IR beam, we utilize a pulsed visible light for a high-throughput, widefield sensing of the transient photothermal effect induced by absorption of single mid-IR pulses. To extract such transient signals, we built a virtual lock-in camera synchronized to the visible probe and IR light pulses with precisely-controlled delays, allowing sub-microsecond temporal resolution determined by the probe pulse width. Our widefield photothermal sensing (WPS) microscope enabled chemical imaging at a speed up to 1250 frames per second, with high spectral fidelity, and offering sub-micron spatial resolution. With the capability of imaging living cells and nanometer-scale polymer films, WPS microscopy opens a new way for high-throughput characterization of biological and material specimens.
△ Less
Submitted 18 November, 2018;
originally announced November 2018.
-
Fault Detection and Isolation of Satellite Gyroscopes Using Relative Positions in Formation Flying
Authors:
Amir Shakouri,
Nima Assadian
Abstract:
A fault detection and isolation method for satellite rate gyros is proposed based on using the satellite-to-satellite measurements such as relative position beside orbit parameters of the primary satellite. By finding a constant of motion, it is shown that the dynamic states in a relative motion are restricted in such a way that the angular velocity vector of primary satellite lies on a quadratic…
▽ More
A fault detection and isolation method for satellite rate gyros is proposed based on using the satellite-to-satellite measurements such as relative position beside orbit parameters of the primary satellite. By finding a constant of motion, it is shown that the dynamic states in a relative motion are restricted in such a way that the angular velocity vector of primary satellite lies on a quadratic surface. This constant of motion is then used to detect the gyroscope faults and estimate the corresponding scale factor or bias values of the rate gyros of the primary satellite. The proposed algorithm works even in time variant fault situations as well, and does not impose any additional subsystems to formation flying satellites. Monte-Carlo simulations are used to ensure that the algorithm retains its performance in the presence of uncertainties. In presence of only measurement noise, the isolation process performs well by selecting a proper threshold. However, the isolation performance degrades as the scale factor approaches unity or bias approaches zero. Finally, the effect of orbital perturbations on isolation process is investigated by including the effect of zonal harmonics as well as drag and without loss of generality, it is shown that the perturbation effects are negligible.
△ Less
Submitted 30 April, 2018; v1 submitted 25 April, 2018;
originally announced April 2018.
-
Orbit Estimation Using a Horizon Detector in the Presence of Uncertain Celestial Body Rotation and Geometry
Authors:
Amir Shakouri,
Mahdi Hazrati Azad,
Nima Assadian
Abstract:
This paper presents an orbit estimation using non-simultaneous horizon detector measurements in the presence of uncertainties in the celestial body rotational velocity and its geometrical characteristics. The celestial body is modelled as a tri-axial ellipsoid with a three-dimensional force field. The non-simultaneous modelling provides the possibility to consider the time gap between horizon meas…
▽ More
This paper presents an orbit estimation using non-simultaneous horizon detector measurements in the presence of uncertainties in the celestial body rotational velocity and its geometrical characteristics. The celestial body is modelled as a tri-axial ellipsoid with a three-dimensional force field. The non-simultaneous modelling provides the possibility to consider the time gap between horizon measurements. An unscented Kalman filter is used to estimate the spacecraft motion states and estimate the geometric characteristics as well as the rotational velocity of the celestial body. A Monte-Carlo simulation is implemented to verify the results. Simulations showed that using non-simultaneous horizon vector measurements, the spacecraft state errors converge to zero even in the presence of an uncertain geometry and rotational velocity of the celestial body.
△ Less
Submitted 16 April, 2018; v1 submitted 12 April, 2018;
originally announced April 2018.
-
Thermodynamic Studies of \b{eta}-Ga2O3 Nanomembrane Field-Effect Transistors on a Sapphire Substrate
Authors:
Hong Zhou,
Kerry Maize,
**hyun Noh,
Ali Shakouri,
Peide D. Ye
Abstract:
The self-heating effect is a severe issue for high-power semiconductor devices, which degrades the electron mobility and saturation velocity, and also affects the device reliability. On applying an ultrafast and high-resolution thermoreflectance imaging technique, the direct self-heating effect and surface temperature increase phenomenon are observed on novel top-gate \b{eta}-Ga2O3 on insulator fi…
▽ More
The self-heating effect is a severe issue for high-power semiconductor devices, which degrades the electron mobility and saturation velocity, and also affects the device reliability. On applying an ultrafast and high-resolution thermoreflectance imaging technique, the direct self-heating effect and surface temperature increase phenomenon are observed on novel top-gate \b{eta}-Ga2O3 on insulator field-effect transistors. Here, we demonstrate that by utilizing a higher thermal conductivity sapphire substrate rather than a SiO2/Si substrate, the temperature rise above room temperature of \b{eta}-Ga2O3 on the insulator field-effect transistor can be reduced by a factor of 3 and thereby the self-heating effect is significantly reduced. Both thermoreflectance characterization and simulation verify that the thermal resistance on the sapphire substrate is less than 1/3 of that on the SiO2/Si substrate. Therefore, maximum drain current density of 535 mA/mm is achieved on the sapphire substrate, which is 70% higher than that on the SiO2/Si substrate due to reduced self-heating. Integration of \b{eta}-Ga2O3 channel on a higher thermal conductivity substrate opens a new route to address the low thermal conductivity issue of \b{eta}-Ga2O3 for power electronics applications.
△ Less
Submitted 9 November, 2017;
originally announced November 2017.
-
Steep-slope Hysteresis-free Negative Capacitance MoS2 Transistors
Authors:
Mengwei Si,
Chun-Jung Su,
Chunsheng Jiang,
Nathan J. Conrad,
Hong Zhou,
Kerry D. Maize,
Gang Qiu,
Chien-Ting Wu,
Ali Shakouri,
Muhammad A. Alam,
Peide D. Ye
Abstract:
The so-called Boltzmann Tyranny defines the fundamental thermionic limit of the subthreshold slope (SS) of a metal-oxide-semiconductor field-effect transistor (MOSFET) at 60 mV/dec at room temperature and, therefore, precludes the lowering of the supply voltage and the overall power consumption. Adding a ferroelectric negative capacitor to the gate stack of a MOSFET may offer a promising solution…
▽ More
The so-called Boltzmann Tyranny defines the fundamental thermionic limit of the subthreshold slope (SS) of a metal-oxide-semiconductor field-effect transistor (MOSFET) at 60 mV/dec at room temperature and, therefore, precludes the lowering of the supply voltage and the overall power consumption. Adding a ferroelectric negative capacitor to the gate stack of a MOSFET may offer a promising solution to bypassing this fundamental barrier. Meanwhile, two-dimensional (2D) semiconductors, such as atomically thin transition metal dichalcogenides (TMDs) due to their low dielectric constant, and ease of integration in a junctionless transistor topology, offer enhanced electrostatic control of the channel. Here, we combine these two advantages and demonstrate for the first time a molybdenum disulfide (MoS2) 2D steep slope transistor with a ferroelectric hafnium zirconium oxide layer (HZO) in the gate dielectric stack. This device exhibits excellent performance in both on- and off-states, with maximum drain current of 510 μA/μm, sub-thermionic subthreshold slope and is essentially hysteresis-free. Negative differential resistance (NDR) was observed at room temperature in the MoS2 negative capacitance field-effect-transistors (NC-FETs) as the result of negative capacitance due to the negative drain-induced-barrier-lowering (DIBL). High on-current induced self-heating effect was also observed and studied.
△ Less
Submitted 29 January, 2018; v1 submitted 22 April, 2017;
originally announced April 2017.
-
\b{eta}-Ga2O3 on Insulator Field-effect Transistors with Drain Currents Exceeding 1.5 A/mm and Their Self-heating Effect
Authors:
Hong Zhou,
Kerry Maize,
Gang Qiu,
Ali Shakouri,
Peide D. Ye
Abstract:
We have demonstrated that depletion/enhancement-mode b-Ga2O3 on insulator field-effect transistors can achieve a record high drain current density of 1.5/1.0 A/mm by utilizing a highly doped b-Ga2O3 nano-membrane as the channel. b-Ga2O3 on insulator field-effect transistor (GOOI FET) shows a high on/off ratio of 1010 and low subthreshold slope of 150 mV/dec even with 300 nm thick SiO2. The enhance…
▽ More
We have demonstrated that depletion/enhancement-mode b-Ga2O3 on insulator field-effect transistors can achieve a record high drain current density of 1.5/1.0 A/mm by utilizing a highly doped b-Ga2O3 nano-membrane as the channel. b-Ga2O3 on insulator field-effect transistor (GOOI FET) shows a high on/off ratio of 1010 and low subthreshold slope of 150 mV/dec even with 300 nm thick SiO2. The enhancement-mode GOOI FET is achieved through surface depletion. An ultra-fast, high resolution thermo-reflectance imaging technique is applied to study the self-heating effect by directly measuring the local surface temperature. High drain current, low Rc, and wide bandgap make the b-Ga2O3 on insulator field-effect transistor a promising candidate for future power electronics applications.
△ Less
Submitted 9 November, 2017; v1 submitted 17 March, 2017;
originally announced March 2017.
-
Limitations of generalised grey phonon models for quasiballistic thermal transport in time-periodic regimes
Authors:
Bjorn Vermeersch,
Ali Shakouri
Abstract:
Suitably superimposed grey-medium solutions of the Boltzmann transport equation (BTE) provide a simple yet accurate description of non-grey quasiballistic heat conduction in transient thermal grating experiments. Recent applications of similar strategies based on kinetic and McKelvey-Schockley-Landauer theory to time-periodic transport predicted notable conductivity suppression only at heating fre…
▽ More
Suitably superimposed grey-medium solutions of the Boltzmann transport equation (BTE) provide a simple yet accurate description of non-grey quasiballistic heat conduction in transient thermal grating experiments. Recent applications of similar strategies based on kinetic and McKelvey-Schockley-Landauer theory to time-periodic transport predicted notable conductivity suppression only at heating frequencies comparable to phonon scattering rates, in contrast to lengthscale criteria observed by several prior studies. Here we show that the frequency-integrated grey-medium approximation (FIGMA) is ill suited to tackle temporally periodic quasiballistic transport. Starting from first-principles phonon dispersions and scattering rates, we obtain semi-analytic 1D BTE solutions for semi-infinite structures subjected to sinusoidal surface heating and compare these to the approximate model counterparts. We find FIGMA-based approaches to overestimate the semiconductor surface temperature by up to one and characteristic heating frequencies for onset of quasiballistic effects by up to three orders of magnitude respectively. Our study reasserts that experimentally observed heating-frequency dependent apparent conductivities originate in the overlap of the characteristic length scale of the thermal gradient with phonon mean free paths.
△ Less
Submitted 19 August, 2016; v1 submitted 17 February, 2016;
originally announced February 2016.
-
Spatiotemporal flux memory in nondiffusive transport
Authors:
Bjorn Vermeersch,
Ali Shakouri
Abstract:
Anomalous diffusion constitutes a relation between tracer flux and tracer density gradient that is inherently nonlocal in space and/or time. Previous studies emphasize the non-Gaussian character of the tracer distribution that arises from adjusted constitutive relations but did not investigate the flux-gradient memory itself. Here, we present a universal analytic framework that enables systematic…
▽ More
Anomalous diffusion constitutes a relation between tracer flux and tracer density gradient that is inherently nonlocal in space and/or time. Previous studies emphasize the non-Gaussian character of the tracer distribution that arises from adjusted constitutive relations but did not investigate the flux-gradient memory itself. Here, we present a universal analytic framework that enables systematic characterisation of nonlocality in a wide variety of transport regimes. A generalised diffusivity kernel $D^{\ast}$ fully embodies the spatiotemporal flux memory with respect to the gradient. An extension of the flux-gradient relation for subdiffusive transport is also proposed. Several conservation and invariance properties can be deduced, including that Poissonian flight processes have no flux memory in time while fractional time diffusion has no flux memory in space. We derive analytical expressions for $D^{\ast}(x,t)$ in several types of anomalous transport dynamics that are commonly encountered in practice, being fractional diffusion equations, tempered Lévy superdiffusion, and tempered fractional time diffusion. This detailed knowledge of the shape and nature of the flux memory, and the corresponding length and time scales over which nonlocal effects are physically important, remain completely hidden in conventional analyses based on tracer distributions or flux-gradient diagrams. Practical capabilities include the interpretation of microscale heat superdiffusion experiments. Overall, the theory can serve as a valuable framework for anomalous transport dynamics across multiple disciplines.
△ Less
Submitted 29 December, 2014;
originally announced December 2014.
-
Nonlocality in microscale heat conduction
Authors:
Bjorn Vermeersch,
Ali Shakouri
Abstract:
Thermal transport at short length and time scales inherently constitutes a nonlocal relation between heat flux and temperature gradient, but this is rarely addressed explicitly. Here, we present a formalism that enables detailed characterisation of the delocalisation effects in nondiffusive heat flow regimes. A convolution kernel $κ^{\ast}$, which we term the nonlocal thermal conductivity, fully e…
▽ More
Thermal transport at short length and time scales inherently constitutes a nonlocal relation between heat flux and temperature gradient, but this is rarely addressed explicitly. Here, we present a formalism that enables detailed characterisation of the delocalisation effects in nondiffusive heat flow regimes. A convolution kernel $κ^{\ast}$, which we term the nonlocal thermal conductivity, fully embodies the spatiotemporal memory of the heat flux with respect to the temperature gradient. Under the relaxation time approximation, the Boltzmann transport equation formally obeys the postulated constitutive law and yields a generic expression for $κ^{\ast}$ in terms of the microscopic phonon properties. Subsequent synergy with stochastic frameworks captures the essential transport physics in compact models with easy to understand parameters. A fully analytical solution for $κ^{\ast}(x')$ in tempered Lévy transport with fractal dimension $α$ and diffusive recovery length $x_{\text{R}}$ reveals that nonlocality is physically important over distances $\sqrt{2-α} \,\,x_{\text{R}}$. This is not only relevant to quasiballistic heat conduction in semiconductor alloys but also applies to similar dynamics observed in other disciplines including hydrology and chemistry. We also discuss how the previously introduced effective thermal conductivity $κ_{\text{eff}}$ inferred phenomenologically by transient thermal grating and time domain thermoreflectance measurements relates to $κ^{\ast}$. Whereas effective conductivities depend on the experimental conditions, the nonlocal thermal conductivity forms an intrinsic material property. Experimental results indicate nonlocality lengths of 400$\,$nm in Si membranes and $\simeq 1\,μ$m in InGaAs and SiGe, in good agreement with typical median phonon mean free paths.
△ Less
Submitted 27 April, 2015; v1 submitted 19 December, 2014;
originally announced December 2014.
-
Superdiffusive heat conduction in semiconductor alloys -- II. Truncated Lévy formalism for experimental analysis
Authors:
Bjorn Vermeersch,
Amr M. S. Mohammed,
Gilles Pernot,
Yee Rui Koh,
Ali Shakouri
Abstract:
Nearly all experimental observations of quasi-ballistic heat flow are interpreted using Fourier theory with modified thermal conductivity. Detailed Boltzmann transport equation (BTE) analysis, however, reveals that the quasi-ballistic motion of thermal energy in semiconductor alloys is no longer Brownian but instead exhibits Lévy dynamics with fractal dimension $α< 2$. Here, we present a framework…
▽ More
Nearly all experimental observations of quasi-ballistic heat flow are interpreted using Fourier theory with modified thermal conductivity. Detailed Boltzmann transport equation (BTE) analysis, however, reveals that the quasi-ballistic motion of thermal energy in semiconductor alloys is no longer Brownian but instead exhibits Lévy dynamics with fractal dimension $α< 2$. Here, we present a framework that enables full 3D experimental analysis by retaining all essential physics of the quasi-ballistic BTE dynamics phenomenologically. A stochastic process with just two fitting parameters describes the transition from pure Lévy superdiffusion as short length and time scales to regular Fourier diffusion. The model provides accurate fits to time domain thermoreflectance raw experimental data over the full modulation frequency range without requiring any `effective' thermal parameters and without any a priori knowledge of microscopic phonon scattering mechanisms. Identified $α$ values for InGaAs and SiGe match ab initio BTE predictions within a few percent. Our results provide experimental evidence of fractal Lévy heat conduction in semiconductor alloys. The formalism additionally indicates that the transient temperature inside the material differs significantly from Fourier theory and can lead to improved thermal characterization of nanoscale devices and material interfaces.
△ Less
Submitted 25 September, 2014; v1 submitted 27 June, 2014;
originally announced June 2014.
-
Superdiffusive heat conduction in semiconductor alloys -- I. Theoretical foundations
Authors:
Bjorn Vermeersch,
Jesus Carrete,
Natalio Mingo,
Ali Shakouri
Abstract:
Semiconductor alloys exhibit a strong dependence of effective thermal conductivity on measurement frequency. So far this quasi-ballistic behaviour has only been interpreted phenomenologically, providing limited insight into the underlying thermal transport dynamics. Here, we show that quasi-ballistic heat conduction in semiconductor alloys is governed by Lévy superdiffusion. By solving the Boltzma…
▽ More
Semiconductor alloys exhibit a strong dependence of effective thermal conductivity on measurement frequency. So far this quasi-ballistic behaviour has only been interpreted phenomenologically, providing limited insight into the underlying thermal transport dynamics. Here, we show that quasi-ballistic heat conduction in semiconductor alloys is governed by Lévy superdiffusion. By solving the Boltzmann transport equation (BTE) with ab initio phonon dispersions and scattering rates, we reveal a transport regime with fractal space dimension $1 < α< 2$ and superlinear time evolution of mean square energy displacement $σ^2(t) \sim t^β (1 < β< 2)$. The characteristic exponents are directly interconnected with the order $n$ of the dominant phonon scattering mechanism $τ\sim ω^{-n} (n>3)$ and cumulative conductivity spectra $κ_Σ(τ;Λ)\sim (τ;Λ)^γ$ resolved for relaxation times or mean free paths through simple relations $α= 3-β= 1 + 3/n = 2 - γ$. The quasi-ballistic transport inside alloys is no longer governed by Brownian motion, but instead dominated by Lévy dynamics. This has important implications for the interpretation of thermoreflectance (TR) measurements with modified Fourier theory. Experimental $α$ values for InGaAs and SiGe, determined through TR analysis with a novel Lévy heat formalism, match ab initio BTE predictions within a few percent. Our findings lead to a deeper and more accurate quantitative understanding of the physics of nanoscale heat flow experiments.
△ Less
Submitted 25 September, 2014; v1 submitted 27 June, 2014;
originally announced June 2014.
-
Transient Energy and Heat Transport in Metals: Effect of the Discrete Character of the Lattice
Authors:
Younes Ezzahri,
Karl Joulain,
Ali Shakouri
Abstract:
A recently developed Shastry's formalism for energy transport is used to analyze the temporal and spatial behaviors of the energy and heat transport in metals under delta function excitation at the surface. Comparison with Cattaneo's model is performed. Both models show the transition between nonthermal (ballistic) and thermal (ballistic-diffusive) regimes. Furthermore, because the new model consi…
▽ More
A recently developed Shastry's formalism for energy transport is used to analyze the temporal and spatial behaviors of the energy and heat transport in metals under delta function excitation at the surface. Comparison with Cattaneo's model is performed. Both models show the transition between nonthermal (ballistic) and thermal (ballistic-diffusive) regimes. Furthermore, because the new model considers the discrete character of the lattice, it highlights some new phenomena such as damped oscillations in the energy transport both in time and space. The energy relaxation of the conduction band electrons in metals is considered to be governed by the electron-phonon scattering, and the scattering time is taken to be averaged over the Fermi surface. Using the new formalism, one can quantify the transfer from nonthermal modes to thermal ones as energy propagates in the material and it is transformed into heat. While the thermal contribution shows a wave-front and an almost exponentially decaying behavior with time, the nonthermal part shows a wave-front and a damped oscillating behavior. Two superimposed oscillations are identified; a fast oscillation that is attributed to the nonthermal nature of energy transport at very short time scales and a slow oscillation that describes the nature of the transition from the nonthermal regime to the thermal regime of energy transport.
△ Less
Submitted 13 October, 2010;
originally announced October 2010.
-
Method of Images for the Fast Calculation of Temperature Distributions in Packaged VLSI Chips
Authors:
Virginia Martín Hériz,
J. -H. Park,
T. Kemper,
S. -M. Kang,
A. Shakouri
Abstract:
Thermal aware routing and placement algorithms are important in industry. Currently, there are reasonably fast Green's function based algorithms that calculate the temperature distribution in a chip made from a stack of different materials. However, the layers are all assumed to have the same size, thus neglecting the important fact that the thermal mounts which are placed underneath the chip ca…
▽ More
Thermal aware routing and placement algorithms are important in industry. Currently, there are reasonably fast Green's function based algorithms that calculate the temperature distribution in a chip made from a stack of different materials. However, the layers are all assumed to have the same size, thus neglecting the important fact that the thermal mounts which are placed underneath the chip can be significantly larger than the chip itself. In an earlier publication, we showed that the image blurring technique can be used to calculate quickly temperature distribution in realistic packages. For this method to be effective, temperature distribution for several point heat sources at the center and at the corner and edges of the chip should be calculated using finite element analysis (FEA) or measured. In addition, more accurate results require correction by a weighting function that will need several FEA simulations. In this paper, we introduce the method of images that take the symmetry of the thermal boundary conditions into account. Thus with only "two" finite element simulations, the steady-state temperature distribution for an arbitrary complex power dissipation profile in a packaged chip can be calculated. Several simulation results are presented. It is shown that the power blurring technique together with the method of images can reproduce the temperature profile with an error less than 0.5%.
△ Less
Submitted 7 January, 2008;
originally announced January 2008.
-
Ultrafast Temperature Profile Calculation in Ic Chips
Authors:
T. Kemper,
Y. Zhang,
Z. Bian,
A. Shakouri
Abstract:
One of the crucial steps in the design of an integrated circuit is the minimization of heating and temperature non-uniformity. Current temperature calculation methods, such as finite element analysis and resistor networks have considerable computation times, making them incompatible for use in routing and placement optimization algorithms. In an effort to reduce the computation time, we have dev…
▽ More
One of the crucial steps in the design of an integrated circuit is the minimization of heating and temperature non-uniformity. Current temperature calculation methods, such as finite element analysis and resistor networks have considerable computation times, making them incompatible for use in routing and placement optimization algorithms. In an effort to reduce the computation time, we have developed a new method, deemed power blurring, for calculating temperature distributions using a matrix convolution technique in analogy with image blurring. For steady state analysis, power blurring was able to predict hot spot temperatures within 1 degree C with computation times 3 orders of magnitude faster than FEA. For transient analysis the computation times where enhanced by a factor of 1000 for a single pulse and around 100 for multiple frequency application, while predicting hot spot temperature within about 1 degree C. The main strength of the power blurring technique is that it exploits the dominant heat spreading in the silicon substrate and it uses superposition principle. With one or two finite element simulations, the temperature point spread function for a sophisticated package can be calculated. Additional simulations could be used to improve the accuracy of the point spread function in different locations on the chip. In this calculation, we considered the dominant heat transfer path through the back of the IC chip and the heat sink. Heat transfer from the top of the chip through metallization layers and the board is usually a small fraction of the total heat dissipation and it is neglected in this analysis.
△ Less
Submitted 12 September, 2007;
originally announced September 2007.
-
Thermal Transient Characterization of Packaged Thin Film Microcoolers
Authors:
K. Fukutani,
R. Singh,
A. Shakouri
Abstract:
A network identification by deconvolution (NID) method is applied to the thermal transient response of packaged and unpackaged microcoolers. A thin film resistor on top of the device is used as the heat source and the temperature sensor. The package and the bonding thermal resistances can be easily identified by comparing structure functions. High-speed coplanar probes are used to achieve a shor…
▽ More
A network identification by deconvolution (NID) method is applied to the thermal transient response of packaged and unpackaged microcoolers. A thin film resistor on top of the device is used as the heat source and the temperature sensor. The package and the bonding thermal resistances can be easily identified by comparing structure functions. High-speed coplanar probes are used to achieve a short time resolution of roughly 100ns in the transient temperature response. This is used to separate the thermal properties of the thin film from the substrate. The obtained thermal resistances of the buffer layer and Silicon substrate are consistent with the theoretical calculations. In order to estimate the superlattice thermal resistance and separate it from the thin SiNx layer deposited underneath the thin film resistive sensor, an order of magnitude faster thermal transient response is needed.
△ Less
Submitted 12 September, 2007;
originally announced September 2007.
-
Study of Phonon Modes in Germanium Nanowires
Authors:
Xi Wang,
Ali Shakouri,
Bin Yu,
Xuhui Sun,
Meyya Meyyappan
Abstract:
The observation of pure phonon confinement effect in germanium nanowires is limited due to the illumination sensitivity of Raman spectra. In this paper we measured Raman spectra for different size germanium nanowires with different excitation laser powers and wavelengths. By eliminating the local heating effect, the phonon confinement effect for small size nanowires was clearly identified. We ha…
▽ More
The observation of pure phonon confinement effect in germanium nanowires is limited due to the illumination sensitivity of Raman spectra. In this paper we measured Raman spectra for different size germanium nanowires with different excitation laser powers and wavelengths. By eliminating the local heating effect, the phonon confinement effect for small size nanowires was clearly identified. We have also fitted the Raman feature changes to estimate the size distribution of nanowires for the first time.
△ Less
Submitted 24 February, 2007;
originally announced February 2007.
-
Monte Carlo Simulation of Electron Transport in Degenerate Semiconductors
Authors:
Mona Zebarjadi,
Ceyhun Bulutay,
Keivan Esfarjani,
Ali Shakouri
Abstract:
A modified algorithm is proposed to include Pauli exclusion principle in Monte-Carlo simulations. This algorithm has significant advantages to implement in terms of simplicity, speed and memory storage. We show that even in moderately high applied fields, one can estimate electronic distribution with a shifted Fermi sphere without introducing significant errors. Furthermore, the free-flights mus…
▽ More
A modified algorithm is proposed to include Pauli exclusion principle in Monte-Carlo simulations. This algorithm has significant advantages to implement in terms of simplicity, speed and memory storage. We show that even in moderately high applied fields, one can estimate electronic distribution with a shifted Fermi sphere without introducing significant errors. Furthermore, the free-flights must be coupled to state availability constraints; this leads to substantial decrease in carrier heating at high fields. We give the correct definition for electronic temperature and show that in high applied fields, the quasi Fermi level is valley dependent. The effect of including Pauli exclusion principle on the band profile; electronic temperature and quasi Fermi level for inhomogeneous case of a single barrier heterostructure is illustrated.
△ Less
Submitted 28 December, 2006;
originally announced December 2006.
-
Exact solution of a nonlinear optimization problem
Authors:
Zhixi Bian,
Hongyun Wang,
Qiaoer Zhou,
Ali Shakouri
Abstract:
In this manuscript, we solve a nonlinear optimization problem in the study of maximizing cooling temperature using inhomogeneous thermoelectric materials.
In this manuscript, we solve a nonlinear optimization problem in the study of maximizing cooling temperature using inhomogeneous thermoelectric materials.
△ Less
Submitted 18 November, 2006;
originally announced November 2006.
-
Thermoelectric transport perpendicular to thin film heterostructures using Monte Carlo technique
Authors:
Mona Zebarjadi,
Ali Shakouri,
Keivan Esfarjani
Abstract:
The Monte Carlo technique is used to calculate electrical as well as thermoelectric transport properties across thin film heterostructures. We study a thin InGaAsP barrier layer sandwiched between two InGaAs contact layers, when the barrier thickness is in 50nm-2000nm range. We found that with decreasing size, the effective Seebeck coefficient is increased substantially. The transition between p…
▽ More
The Monte Carlo technique is used to calculate electrical as well as thermoelectric transport properties across thin film heterostructures. We study a thin InGaAsP barrier layer sandwiched between two InGaAs contact layers, when the barrier thickness is in 50nm-2000nm range. We found that with decreasing size, the effective Seebeck coefficient is increased substantially. The transition between pure ballistic thermionic transport and fully diffusive thermoelectric transport is also described.
△ Less
Submitted 2 October, 2006;
originally announced October 2006.
-
Thermoelectric properties of a nanocontact
Authors:
Keivan Esfarjani,
Mona Zebarjadi,
Ali Shakouri,
Yoshiyuki Kawazoe
Abstract:
Thermoelectric properties of a nanocontact made of two capped single wall nanotubes (SWNT) are calculated within the tight-binding approximation and Green's function method. It is found that semiconducting nanotubes can have high Seebeck coefficient very near the actual Fermi energy. This in turn leads to very high figures of merit easily exceeding one. Modifying the properties by shifting the c…
▽ More
Thermoelectric properties of a nanocontact made of two capped single wall nanotubes (SWNT) are calculated within the tight-binding approximation and Green's function method. It is found that semiconducting nanotubes can have high Seebeck coefficient very near the actual Fermi energy. This in turn leads to very high figures of merit easily exceeding one. Modifying the properties by shifting the chemical potential can be achieved by do** or application of a (nano-)gate voltage. The presence of impurities near the contact also strongly modify the properties and this can be taken advantage of, in order to design devices with high thermopower and figures of merit.
△ Less
Submitted 26 October, 2005;
originally announced October 2005.
-
Demonstration of electron filtering to increase the Seebeck coefficient in ErAs:InGaAs/InGaAlAs superlattices
Authors:
J. M. O. Zide,
D. Vashaee,
G. Zeng,
J. E. Bowers,
A. Shakouri,
A. C. Gossard
Abstract:
In this letter, we explore electron filtering as a technique to increase Seebeck coefficient and the thermoelectric power factor of heterostructured materials over that of the bulk. We present a theoretical model in which Seebeck coefficient and the power factor can be increased in an InGaAs based composite material. Experimental measurements of the cross-plane Seebeck coefficient are presented…
▽ More
In this letter, we explore electron filtering as a technique to increase Seebeck coefficient and the thermoelectric power factor of heterostructured materials over that of the bulk. We present a theoretical model in which Seebeck coefficient and the power factor can be increased in an InGaAs based composite material. Experimental measurements of the cross-plane Seebeck coefficient are presented and confirm the importance of the electron filtering technique to decouple the electrical conductivity and Seebeck coefficient to increase the thermoelectric power factor.
△ Less
Submitted 18 October, 2005;
originally announced October 2005.