-
Sol-gel transition by evaporation in porous media
Authors:
Romane Le Dizès Castell,
Leo Pel,
Tinhinane Chekai,
Hannelore Derluyn,
Mario Scheel,
Sara Jabbari-Farouji,
Noushine Shahidzadeh
Abstract:
Historical monuments, outdoor stone sculptures and artworks made of porous materials are exposed to chemical and physical degradation over time. Presently, the most promising route for consolidation of weakened porous materials is the injection of viscoelastic solutions of polymerizing compounds. Those compounds, after injection, undergo a sol-gel transition inside the porous media through evapora…
▽ More
Historical monuments, outdoor stone sculptures and artworks made of porous materials are exposed to chemical and physical degradation over time. Presently, the most promising route for consolidation of weakened porous materials is the injection of viscoelastic solutions of polymerizing compounds. Those compounds, after injection, undergo a sol-gel transition inside the porous media through evaporation of the solvent. Finding a suitable gelifying solution as a consolidant calls for understanding the drying kinetics of viscoelastic fluids in porous media. Here, we present a multiscale study of the drying kinetics of solutions during the sol-gel transition. We investigate the drying dynamics and subsequent water uptake of a gel using NMR and X-ray microtomography techniques in porous materials. We find that during drying, a distinct front develops which separates the liquid region from the gelled region. This front advances from the free surface of evaporation towards the inner parts of the stone. We identify different drying periods which appear to be dependent on the intrinsic properties of the porous medium influencing strongly the homogeneity of the final gel distribution within a treated stone. Our findings not only are relevant for the consolidation of porous artworks but also for civil and soil engineering processes where the fluids considered are generally more complex than water.
△ Less
Submitted 6 May, 2024; v1 submitted 16 November, 2023;
originally announced November 2023.
-
Droplet Size Distribution in Emulsions
Authors:
Manon L'Estimé,
Michael Schindler,
Noushine Shahidzadeh,
Daniel Bonn
Abstract:
The droplet size in emulsions is known to affect the rheological properties and plays a crucial role in the many applications of emulsions. Despite its importance, the underlying mechanisms governing droplet size in emulsification remain poorly understood. We investigate the average drop size and size distribution upon emulsification with a high-shear mixer for model oil-in-water emulsions stabili…
▽ More
The droplet size in emulsions is known to affect the rheological properties and plays a crucial role in the many applications of emulsions. Despite its importance, the underlying mechanisms governing droplet size in emulsification remain poorly understood. We investigate the average drop size and size distribution upon emulsification with a high-shear mixer for model oil-in-water emulsions stabilized by a surfactant. The size distribution is found to be a log-normal distribution, resulting from the repetitive random breakup of drops. High-shear emulsification, the usual way of making emulsions, is therefore found to be very different from turbulent emulsification given by the Kolmogorov-Hinze theory for which power-law distributions of the drop size are expected. In agreement with this, the mean droplet size does not follow a scaling with the Reynolds number of the emulsification flow, but rather a capillary number scaling based on the viscosity of the continuous phase.
△ Less
Submitted 16 November, 2023;
originally announced November 2023.
-
Floppy hydrated salt microcrystals
Authors:
Rozeline Wijnhorst,
Menno Demmenie,
Etienne Jambon-Puillet,
Freek Ariese,
Daniel Bonn,
Noushine Shahidzadeh
Abstract:
The crystalline structure of minerals due to the highly ordered assembly of its constituent atoms, ions or molecules confers a considerable hardness and brittleness to the materials. As a result, they are generally subject to fracture. Here we report that microcrystals of natural inorganic salt hydrates such as sodium sulfate decahydrate (Na2SO4.10H2O) and magnesium sulfate hexahydrate (MgSO4.6H2O…
▽ More
The crystalline structure of minerals due to the highly ordered assembly of its constituent atoms, ions or molecules confers a considerable hardness and brittleness to the materials. As a result, they are generally subject to fracture. Here we report that microcrystals of natural inorganic salt hydrates such as sodium sulfate decahydrate (Na2SO4.10H2O) and magnesium sulfate hexahydrate (MgSO4.6H2O) can behave remarkably differently: instead of having a defined faceted geometrical shape and being hard or brittle, they lose their facets and become soft and deformable when in contact with their saturated salt solution at their deliquescence point. As a result, the hydrated crystals simultaneously behaves as crystalline and liquid-like. We show that the observed elasticity is a consequence of a trade-off between the excess capillary energy introduced by the deformation from the equilibrium shape and viscous flow over the surface of the microcrystals. This surprising, unusual mechanical properties reported here reveals the role of the water molecules present in the crystalline structure. Although many compounds can incorporate water molecules in their crystalline frameworks, the relationship between the different hydrates and anhydrate crystal forms are still poorly investigated. Our results on the floppy behaviour of such crystalline structure reveals some unexplored properties of water molecules entrapped in the crystalline structure and can open novel routes for their application in various fields such as pharmaceutical sciences, thermal energy storage and even the traceability of water on Mars.
△ Less
Submitted 16 June, 2022;
originally announced June 2022.
-
Stringiness of Hyaluronic Acid Emulsions
Authors:
H. V. M. Kibbelaar,
A. Deblais,
K. P. Velikov,
D. Bonn,
N. Shahidzadeh
Abstract:
In this work, we underline the importance of the molecular weight of hyaluronic acid on the elongational properties of concentrated emulsions. The filament formation properties, e.g. the stringiness, of an emulsion is a key determinant of a product liking and repeat purchase. Here, we find that high molecular weight hyaluronic acid and a high stretching speed are the control parameters affecting t…
▽ More
In this work, we underline the importance of the molecular weight of hyaluronic acid on the elongational properties of concentrated emulsions. The filament formation properties, e.g. the stringiness, of an emulsion is a key determinant of a product liking and repeat purchase. Here, we find that high molecular weight hyaluronic acid and a high stretching speed are the control parameters affecting the filament formation of an emulsion.
△ Less
Submitted 30 June, 2021; v1 submitted 24 June, 2021;
originally announced June 2021.
-
Droplet Splashing on Rough Surfaces
Authors:
T. C. de Goede,
K. G. de Bruin,
N. Shahidzadeh,
D. Bonn
Abstract:
When a droplet hits a surface fast enough, droplet splashing can occur: smaller secondary droplets detach from the main droplet during impact. While droplet splashing on smooth surfaces is by now well understood, the surface roughness also affects at which impact velocity a droplet splashes. In this study, the influence of the surface roughness on droplet splashing is investigated. By changing the…
▽ More
When a droplet hits a surface fast enough, droplet splashing can occur: smaller secondary droplets detach from the main droplet during impact. While droplet splashing on smooth surfaces is by now well understood, the surface roughness also affects at which impact velocity a droplet splashes. In this study, the influence of the surface roughness on droplet splashing is investigated. By changing the root mean square roughness of the impacted surface, we show that the droplet splashing velocity is only affected when the droplet roughness is large enough to disrupt the spreading droplet lamella and change the droplet splashing mechanism from corona to prompt splashing. Finally, using Weber and Ohnesorge number scaling models, we also show that the measured splashing velocity for both water and ethanol on surfaces with different roughness and water-ethanol mixtures collapse onto a single curve, showing that the droplet splashing velocity on rough surfaces scales with the Ohnesorge number defined with the surface roughness length scale.
△ Less
Submitted 13 January, 2021;
originally announced January 2021.
-
Droplet impact of Newtonian fluids and blood on simple fabrics: effect of fabric pore size and underlying substrate
Authors:
T. C. de Goede,
A. M. Moqaddam,
K. C. M. Limpens,
S. A. Kooij,
D. Derome,
J. Carmeliet,
N. Shahidzadeh,
D. Bonn
Abstract:
When a droplet impacts a fabric mesh at a sufficiently high impact velocity, it not only spreads over the fabric but also penetrate its pores. To determine the influence of this liquid penetration of the fabric on droplet spreading on thin fabric meshes, we measured the droplet spreading ratio on fabric with and without an underlying substrate using a high-speed camera. For fabrics without a subst…
▽ More
When a droplet impacts a fabric mesh at a sufficiently high impact velocity, it not only spreads over the fabric but also penetrate its pores. To determine the influence of this liquid penetration of the fabric on droplet spreading on thin fabric meshes, we measured the droplet spreading ratio on fabric with and without an underlying substrate using a high-speed camera. For fabrics without a substrate, the droplet spreading ratio is reduced as the fabric penetration by the liquid reduces the droplet volume spreading on top of the fabric. Using entropic lattice Boltzmann simulations, we find that the lower droplet spreading ratio on fabrics, both with and without a substrate, is due to an increase of viscous losses inside the droplet during spreading. Comparing droplet impact of blood with its Newtonian counterpart, we show that for spreading on fabrics, just like on smooth surfaces, blood can be approximated as a Newtonian fluid.
△ Less
Submitted 2 January, 2020;
originally announced January 2020.
-
Sprays from droplets impacting a mesh
Authors:
Stefan Kooij,
Ali Mazloomi Moqaddam,
Thijs C. de Goede,
Dominique Derome,
Jan Carmeliet,
Noushine Shahidzadeh,
Daniel Bonn
Abstract:
In liquid spray applications, the sprays are often created by the formation and destabilization of a liquid sheet or jet. The disadvantage of such atomization processes is that the breakup is often highly irregular, causing a broad distribution of droplet sizes. As these sizes are controlled by the ligament corrugation and size, a monodisperse spray should consist of ligaments that are both smooth…
▽ More
In liquid spray applications, the sprays are often created by the formation and destabilization of a liquid sheet or jet. The disadvantage of such atomization processes is that the breakup is often highly irregular, causing a broad distribution of droplet sizes. As these sizes are controlled by the ligament corrugation and size, a monodisperse spray should consist of ligaments that are both smooth and of equal size. A straightforward way of creating smooth and equally sized ligaments is by droplet impact on a mesh. In this work we show that this approach does however not produce monodisperse droplets, but instead the droplet size distribution is very broad, with a large number of small satellite drops. We demonstrate that the fragmentation is controlled by a jet instability, where initial perturbations caused by the injection process result in long-wavelength disturbances that determine the final ligament breakup. During destabilization the crests of these disturbances are connected by thin ligaments which are the leading cause of the large number of small droplets. A secondary coalescence process, due to small relative velocities between droplets, partly masks this effect by reducing the amount of small droplets. Of the many parameters in this system, we describe the effect of varying the mesh size, mesh rigidity, impact velocity, wetting properties, kee** the liquid properties the same by focusing on water droplets only. We further perform Lattice Boltzmann modeling of the impact process that reproduces key features seen in the experimental data.
△ Less
Submitted 6 December, 2018;
originally announced December 2018.
-
Wetting of Water on Graphene
Authors:
Bijoyendra Bera,
Noushine Shahidzadeh,
Himanshu Mishra,
Daniel Bonn
Abstract:
The wetting properties of graphene have proven controversial and difficult to assess. The presence of a graphene layer on top of a substrate does not significantly change the wetting properties of the solid substrate, suggesting that a single graphene layer does not affect the adhesion between the wetting phase and the substrate. However, wetting experiments of water on graphene show contact angle…
▽ More
The wetting properties of graphene have proven controversial and difficult to assess. The presence of a graphene layer on top of a substrate does not significantly change the wetting properties of the solid substrate, suggesting that a single graphene layer does not affect the adhesion between the wetting phase and the substrate. However, wetting experiments of water on graphene show contact angles that imply a large amount of adhesion. Here, we investigate the wetting of graphene by measuring the mass of water vapor adsorbing to graphene flakes of different thickness at different relative humidities. Our experiments unambiguously show that the thinnest of graphene flakes do not adsorb water, from which it follows that the contact angle of water on these flakes is ~180o. Thicker flakes of graphene nanopowder, on the other hand, do adsorb water. A calculation of the van der Waals (vdW) interactions that dominate the adsorption in this system confirms that the adhesive interactions between a single atomic layer of graphene and water are so weak that graphene is superhydrophobic. The observations are confirmed in an independent experiment on graphene-coated water droplets that shows that it is impossible to make liquid 'marbles' with molecularly thin graphene.
△ Less
Submitted 9 February, 2017; v1 submitted 28 November, 2016;
originally announced November 2016.
-
Measurement of the Pressure induced by salt crystallization in confinement
Authors:
Julie Desarnaud,
Daniel Bonn,
Noushine Shahidzadeh
Abstract:
Salt crystallization is a major cause of weathering of artworks, monuments and rocks. Damage will occur if crystals continue to grow in confinement, i.e. within the pore space of these materials generating mechanical stresses. We report on a novel method that allows to directly measure, at the microscale, the resulting pressure while visualizing the spontaneous nucleation and growth of alkali hali…
▽ More
Salt crystallization is a major cause of weathering of artworks, monuments and rocks. Damage will occur if crystals continue to grow in confinement, i.e. within the pore space of these materials generating mechanical stresses. We report on a novel method that allows to directly measure, at the microscale, the resulting pressure while visualizing the spontaneous nucleation and growth of alkali halide salts. The experiments reveal the crucial role of the wetting films between the growing crystal and the confining walls for the development of the pressure. The results suggest that the pressure originates from a charge repulsion between the similarly charged wall and the crystal separated by a ~1.5 nm salt solution film. Consequently, if the walls are made hydrophobic, no film and no crystallization pressure are detected. The magnitude of the pressure is system-specific and explains how a growing crystal exerts stresses at the scale of individual grains in porous materials.
△ Less
Submitted 25 January, 2016;
originally announced January 2016.
-
Metastability limit for the nucleation of NaCl crystals in confinement
Authors:
Julie Desarnaud,
Hannelore Derluyn,
Jan Carmeliet,
Daniel Bonn,
Noushine Shahidzadeh
Abstract:
We study the spontaneous nucleation and growth of sodium chloride crystals induced by controlled evaporation in confined geometries (microcapillaries) spanning several orders of magnitude in volume. In all experiments, the nucleation happens reproducibly at a very high supersaturation S~1.6 and is independent of the size, shape and surface properties of the microcapillary. We show from classical n…
▽ More
We study the spontaneous nucleation and growth of sodium chloride crystals induced by controlled evaporation in confined geometries (microcapillaries) spanning several orders of magnitude in volume. In all experiments, the nucleation happens reproducibly at a very high supersaturation S~1.6 and is independent of the size, shape and surface properties of the microcapillary. We show from classical nucleation theory that this is expected: S~1.6 corresponds to the point where nucleation first becomes observable on experimental time scales. A consequence of the high supersaturations reached at the onset of nucleation is the very rapid growth of a single skeletal (Hopper) crystal. Experiments on porous media reveal also the formation of Hopper crystals in the entrapped liquid pockets in the porous network and consequently underline the fact that sodium chloride can easily reach high supersaturations, in spite of what is commonly assumed for this salt.
△ Less
Submitted 30 January, 2014;
originally announced January 2014.
