-
Bent Crystal Design and Characterization for High-Energy Physics Experiments
Authors:
Marco Romagnoni,
Vincenzo Guidi,
Laura Bandiera,
Davide De Salvador,
Andrea Mazzolari,
Francesco Sgarbossa,
Mattia Soldani,
Alexei Sytov,
Melissa Tamisari
Abstract:
Bent crystal are widely used as optics for X-rays, but via the phenomenon of planar channeling they may act as waveguide for relativistic charged particles beam as well, outperforming some of the traditional technologies currently employed. A physical description of the phenomenon and the resulting potential for applications in a particle accelerator is reported. The elastic properties of the anis…
▽ More
Bent crystal are widely used as optics for X-rays, but via the phenomenon of planar channeling they may act as waveguide for relativistic charged particles beam as well, outperforming some of the traditional technologies currently employed. A physical description of the phenomenon and the resulting potential for applications in a particle accelerator is reported. The elastic properties of the anisotropic crystal lattice medium are discussed, introducing different types of curvature which can enable a wide array of bending schemes optimized for each different case features. The technological development of machining strategy and bending solutions useful for the fabrication of crystals suitable in high energy particle manipulations are described. As well as the high precision characterization processes developed in order to satisfy the strict requirements for installation in an accelerator. Finally, the characterization of channeling phenomenon in bent crystal is described, pointing out several experimental setups suitable to comply each specific case constrains.
△ Less
Submitted 22 May, 2024;
originally announced May 2024.
-
Acceleration of electromagnetic shower development and enhancement of light yield in oriented scintillating crystals
Authors:
Mattia Soldani,
Pietro Monti-Guarnieri,
Alessia Selmi,
Nicola Argiolas,
Luca Bomben,
Claudia Brizzolari,
Nicola Canale,
Stefano Carsi,
Nikolaos Charitonidis,
Davide De Salvador,
Vincenzo Guidi,
Viktar Haurylavets,
Mikhail Korzhik,
Giulia Lezzani,
Alexander Lobko,
Lorenzo Malagutti,
Sofia Mangiacavalli,
Valerio Mascagna,
Andrea Mazzolari,
Vitaly Mechinsky,
Matthew Moulson,
Riccardo Negrello,
Gianfranco Paternò,
Leonardo Perna,
Christian Petroselli
, et al. (9 additional authors not shown)
Abstract:
We observed a substantial increase of the scintillation light output of lead tungstate (PbWO$_4$) at a small incidence angle with respect to two main lattice axes. This reflects the acceleration of electromagnetic shower development that occurs in the crystalline Strong Field. We measured the scintillation light generated by $120$-$\mathrm{GeV}$ electrons and $10$-$100$-$\mathrm{GeV}$ $γ$ rays on…
▽ More
We observed a substantial increase of the scintillation light output of lead tungstate (PbWO$_4$) at a small incidence angle with respect to two main lattice axes. This reflects the acceleration of electromagnetic shower development that occurs in the crystalline Strong Field. We measured the scintillation light generated by $120$-$\mathrm{GeV}$ electrons and $10$-$100$-$\mathrm{GeV}$ $γ$ rays on thick samples. This result deepens the knowledge of the shower development mechanisms in crystal scintillators and could pave the way to the development of innovative accelerator- and space-borne calorimeters.
△ Less
Submitted 18 April, 2024;
originally announced April 2024.
-
Observation of Fine Structure in Channeling of Particles in Bent Crystals
Authors:
A. Mazzolari,
H. Backe,
L. Bandiera,
N. Canale,
D. De Salvador,
P. Drexler,
V. Guidi,
P. Klag,
W. Lauth,
L. Malagutti,
R. Negrello,
G. Paternò,
M. Romagnoni,
F. Sgarbossa,
A. Sytov,
V. Tikhomirov,
D. Valzani
Abstract:
Using the newly developed 530 MeV positron beam from the Mainz Microtron MAMI and employing a bent silicon crystal, we demonstrate the first successful manipulation with high efficiencies of the trajectories of positrons through planar channeling and volume reflection. This uncovered the presence of fine structure within the angular distribution of charged particles when they are channeled between…
▽ More
Using the newly developed 530 MeV positron beam from the Mainz Microtron MAMI and employing a bent silicon crystal, we demonstrate the first successful manipulation with high efficiencies of the trajectories of positrons through planar channeling and volume reflection. This uncovered the presence of fine structure within the angular distribution of charged particles when they are channeled between the planes of bent crystals. The alignment of our experimental findings with simulation results not only demonstrates a deeper understanding of the interactions between charged particle beams and bent crystals but also signals a new phase in the development of innovative methodologies for slow extraction in circular accelerators operating in the GeV range, with implications for worldwide accelerators. Our results also mark a considerable progression in the generation of advanced x-ray sources through the channeling process in periodically bent crystals, rooted in a comprehensive understanding of the interactions between positron beams and such crystals.
△ Less
Submitted 12 April, 2024;
originally announced April 2024.
-
Beam test, simulation, and performance evaluation of PbF$_2$ and PWO-UF crystals with SiPM readout for a semi-homogeneous calorimeter prototype with longitudinal segmentation
Authors:
C. Cantone,
S. Carsi,
S. Ceravolo,
E. Di Meco,
E. Diociaiuti,
I. Frank,
S. Kholodenko,
S. Martellotti,
M. Mirra,
P. Monti-Guarnieri,
M. Moulson,
D. Paesani,
M. Prest,
M. Romagnoni,
I. Sarra,
F. Sgarbossa,
M. Soldani,
E. Vallazza
Abstract:
Crilin (Crystal Calorimeter with Longitudinal Information) is a semi-homogeneous, longitudinally segmented electromagnetic calorimeter based on high-$Z$, ultra-fast crystals with UV-extended SiPM readout. The Crilin design has been proposed as a candidate solution for both a future Muon Collider barrel ECAL and for the Small Angle Calorimeter of the HIKE experiment. As a part of the Crilin develop…
▽ More
Crilin (Crystal Calorimeter with Longitudinal Information) is a semi-homogeneous, longitudinally segmented electromagnetic calorimeter based on high-$Z$, ultra-fast crystals with UV-extended SiPM readout. The Crilin design has been proposed as a candidate solution for both a future Muon Collider barrel ECAL and for the Small Angle Calorimeter of the HIKE experiment. As a part of the Crilin development program, we have carried out beam tests of small ($10\times10\times40$~mm$^3$) lead fluoride (PbF$_2$) and ultra-fast lead tungstate (PbWO$_4$, PWO) crystals with 120~GeV electrons at the CERN SPS to study the light yield, timing response, and systematics of light collection with a proposed readout scheme. For a single crystal of PbF$_2$, corresponding to a single Crilin cell, a time resolution of better than 25~ps is obtained for $>$3 GeV of deposited energy. For a single cell of \pwo, a time resolution of better than 45~ps is obtained for the same range of deposited energy. This timing performance fully satisfies the design requirements for the Muon Collider and HIKE experiments. Further optimizations of the readout scheme and crystal surface preparation are expected to bring further improvements.
△ Less
Submitted 2 August, 2023;
originally announced August 2023.
-
HIKE, High Intensity Kaon Experiments at the CERN SPS
Authors:
E. Cortina Gil,
J. Jerhot,
N. Lurkin,
T. Numao,
B. Velghe,
V. W. S. Wong,
D. Bryman,
L. Bician,
Z. Hives,
T. Husek,
K. Kampf,
M. Koval,
A. T. Akmete,
R. Aliberti,
V. Büscher,
L. Di Lella,
N. Doble,
L. Peruzzo,
M. Schott,
H. Wahl,
R. Wanke,
B. Döbrich,
L. Montalto,
D. Rinaldi,
F. Dettori
, et al. (154 additional authors not shown)
Abstract:
A timely and long-term programme of kaon decay measurements at a new level of precision is presented, leveraging the capabilities of the CERN Super Proton Synchrotron (SPS). The proposed programme is firmly anchored on the experience built up studying kaon decays at the SPS over the past four decades, and includes rare processes, CP violation, dark sectors, symmetry tests and other tests of the St…
▽ More
A timely and long-term programme of kaon decay measurements at a new level of precision is presented, leveraging the capabilities of the CERN Super Proton Synchrotron (SPS). The proposed programme is firmly anchored on the experience built up studying kaon decays at the SPS over the past four decades, and includes rare processes, CP violation, dark sectors, symmetry tests and other tests of the Standard Model. The experimental programme is based on a staged approach involving experiments with charged and neutral kaon beams, as well as operation in beam-dump mode. The various phases will rely on a common infrastructure and set of detectors.
△ Less
Submitted 29 November, 2022;
originally announced November 2022.
-
Crystal-based pair production for a lepton collider positron source
Authors:
L. Bandiera,
L. Bomben,
R. Camattari,
G. Cavoto,
I. Chaikovska,
R. Chehab,
D. De Salvador,
V. Guidi,
V. Haurylavets,
E. Lutsenko,
V. Mascagna,
A. Mazzolari,
M. Prest,
M. Romagnoni,
F. Ronchetti,
F. Sgarbossa,
M. Soldani,
A. Sytov,
M. Tamisari,
V. Tikhomirov,
E. Vallazza
Abstract:
An intense positron sources is a demanding element in the design of future lepton colliders. A crystal-based hybrid positron source could be an alternative to a more conventional scheme based on the electron conversion into positron in a thick amorphous target. The conceptual idea of the hybrid source is to have two separate objects, a photon radiator and a photon-to-positron converter target. In…
▽ More
An intense positron sources is a demanding element in the design of future lepton colliders. A crystal-based hybrid positron source could be an alternative to a more conventional scheme based on the electron conversion into positron in a thick amorphous target. The conceptual idea of the hybrid source is to have two separate objects, a photon radiator and a photon-to-positron converter target. In such a scheme an electron beam crosses a thin axially oriented crystal with the emission of a channeling radiation, characterized by a considerably larger amount of photons if compared to Bremsstrahlung. The net result is an increase in the number of produced positrons at the converter target. In this paper we present the results of a beam test conducted at the DESY TB 21 with 5.6 GeV electron beam and a crystalline tungsten radiator. Experimental data clearly highlight an increased production of photons and they are critically compared with the outcomes of novel method to simulate the number of radiated photons, showing a very good agreement. Strong of this, the developed simulation tool has been exploited to design a simple scheme for a positron source based on oriented crystal, demonstrating the advantages in terms of reduction of both deposited energy and the peak energy deposition density if compared to conventional sources. The presented work opens the way for a realistic and detailed design of a hybrid crystal-based positron source for future lepton colliders.
△ Less
Submitted 14 March, 2022;
originally announced March 2022.
-
Characterization and modeling of thermally-induced do** contaminants in high-purity Germanium
Authors:
Virginia Boldrini,
Gianluigi Maggioni,
Sara Carturan,
Walter Raniero,
Francesco Sgarbossa,
Ruggero Milazzo,
Daniel Ricardo Napoli,
Enrico Napolitani,
Davide De Salvador
Abstract:
High purity Ge (HPGe) is the key material for gamma ray detector production. Its high purity level (< 2x10^(-4) ppb of do** impurity) has to be preserved in the bulk during the processes needed to form the detector junctions. With the goal of improving the device performance and expanding the application fields, in this paper many alternative do** processes are evaluated, in order to verify th…
▽ More
High purity Ge (HPGe) is the key material for gamma ray detector production. Its high purity level (< 2x10^(-4) ppb of do** impurity) has to be preserved in the bulk during the processes needed to form the detector junctions. With the goal of improving the device performance and expanding the application fields, in this paper many alternative do** processes are evaluated, in order to verify their effect on the purity of the material. In more detail, we investigated the electrical activation of contaminating do** defects or impurities inside the bulk HPGe, induced by both conventional and non-conventional surface do** processes, such as B ion implantation, P and Ga diffusion from Spin-On Do** (SOD) sources, Sb equilibrium diffusion from a remote sputtered source and laser thermal annealing (LTA) of sputtered Sb. Do** defects, thermally-activated during high temperature annealing, were characterized through electrical measurements. A phenomenological model describing the contamination process was developed and used to analyze the diffusion parameters and possible process thermal windows. It resulted that out-of-equilibrium do** processes confined to the HPGe surface have higher possibilities to be successfully employed for the formation of thin contacts, maintaining the pristine purity of the bulk material. Among them, laser thermal annealing turned out to be the most promising.
△ Less
Submitted 2 July, 2018;
originally announced July 2018.
