-
Room-temperature bulk plasticity and tunable dislocation densities in KTaO3
Authors:
Xufei Fang,
Jiawen Zhang,
Alexander Frisch,
Oliver Preuß,
Chukwudalu Okafor,
Martin Setvin,
Wenjun Lu
Abstract:
We report room-temperature bulk plasticity mediated by dislocations in single-crystal cubic KTaO3, contrasting the conventional knowledge that single-crystal KTaO3 is susceptible to brittle cleavage. A mechanics-based combinatorial experimental approach using cyclic Brinell indentation, scratching, and uniaxial bulk compression consistently demonstrates room-temperature dislocation plasticity in K…
▽ More
We report room-temperature bulk plasticity mediated by dislocations in single-crystal cubic KTaO3, contrasting the conventional knowledge that single-crystal KTaO3 is susceptible to brittle cleavage. A mechanics-based combinatorial experimental approach using cyclic Brinell indentation, scratching, and uniaxial bulk compression consistently demonstrates room-temperature dislocation plasticity in KTaO3 from the mesoscale to the macroscale. This approach also delivers tunable dislocation densities and plastic zone sizes. Scanning transmission electron microscopy analysis underpins the activated slip system to be <110>{1-10}. Given the growing significance of KTaO3 as an emerging electronic oxide and the increasing interest in dislocations for tuning physical properties of oxides, our findings are expected to trigger synergistic research interest in KTaO3 with dislocations.
△ Less
Submitted 2 June, 2024;
originally announced June 2024.
-
Duality and degeneracy lifting in two-dimensional electron liquids on SrTiO$_3$(001)
Authors:
Igor Sokolović,
Eduardo B. Guedes,
Thomas P. van Waas,
Samuel Poncé,
Craig Polley,
Michael Schmid,
Ulrike Diebold,
Milan Radović,
Martin Setvín,
J. Hugo Dil
Abstract:
Two-dimensional electron liquids (2DELs) have increasing technological relevance for ultrafast electronics and spintronics, yet significant gaps in their fundamental understanding are exemplified on the prototypical SrTiO$_3$. We correlate the exact SrTiO$_3$(001) surface structure with distinct 2DELs through combined microscopic angle-resolved photoemission spectroscopy and non-contact atomic for…
▽ More
Two-dimensional electron liquids (2DELs) have increasing technological relevance for ultrafast electronics and spintronics, yet significant gaps in their fundamental understanding are exemplified on the prototypical SrTiO$_3$. We correlate the exact SrTiO$_3$(001) surface structure with distinct 2DELs through combined microscopic angle-resolved photoemission spectroscopy and non-contact atomic force microscopy on truly bulk-terminated surfaces that alleviate structural uncertainties inherent to this long-studied system. The SrO termination is shown to develop a 2DEL following the creation of oxygen vacancies, unlike the intrinsically metallic TiO$_2$ termination. Differences in degeneracy of the 2DELs, that share the same band filling and identical band bending, are assigned to polar distortions of the Ti atoms in combination with spin order, supported with the extraction of fundamental electron-phonon coupling strength. These results not only resolve the ambiguities regarding 2DELs on SrTiO$_3$ thus far, but also pave the way to manipulating band filling and spin order in oxide 2DELs in general.
△ Less
Submitted 31 May, 2024; v1 submitted 29 May, 2024;
originally announced May 2024.
-
Machine Learning Based Prediction of Polaron-Vacancy Patterns on the TiO$_2$(110) Surface
Authors:
Viktor C. Birschitzky,
Igor Sokolovic,
Michael Prezzi,
Krisztian Palotas,
Martin Setvin,
Ulrike Diebold,
Michele Reticcioli,
Cesare Franchini
Abstract:
The multifaceted physics of oxides is shaped by their composition and the presence of defects, which are often accompanied by the formation of polarons. The simultaneous presence of polarons and defects, and their complex interactions, pose challenges for first-principles simulations and experimental techniques. In this study, we leverage machine learning and a first-principles database to analyze…
▽ More
The multifaceted physics of oxides is shaped by their composition and the presence of defects, which are often accompanied by the formation of polarons. The simultaneous presence of polarons and defects, and their complex interactions, pose challenges for first-principles simulations and experimental techniques. In this study, we leverage machine learning and a first-principles database to analyze the distribution of surface oxygen vacancies (V$_{\rm O}$) and induced small polarons on rutile TiO$_2$(110), effectively disentangling the interactions between polarons and defects. By combining neural-network supervised learning and simulated annealing, we elucidate the inhomogeneous V$_{\rm O}$ distribution observed in scanning probe microscopy (SPM). Our innovative approach allows us to understand and predict defective surface patterns at previously inaccessible length scales, identifying the specific role of individual types of defects. Specifically, surface-polaron-stabilizing V$_{\rm O}$-configurations are identified, which could have consequences for surface reactivity.
△ Less
Submitted 22 January, 2024;
originally announced January 2024.
-
Interaction of surface cations of cleaved mica with water in vapor and liquid forms
Authors:
Giada Franceschi,
Sebastian Brandstetter,
Jan Balajka,
Igor Sokolović,
Jiri Paveleć,
Martin Setvín,
Michael Schmid,
Ulrike Diebold
Abstract:
Natural minerals contain ions that become hydrated when they come into contact with water in vapor and liquid forms. Muscovite mica -- a common phyllosilicate with perfect cleavage planes -- is an ideal system to investigate the details of ion hydration. The cleaved mica surface is decorated by an array of K$^+$ ions that can be easily exchanged with other ions or protons when immersed in an aqueo…
▽ More
Natural minerals contain ions that become hydrated when they come into contact with water in vapor and liquid forms. Muscovite mica -- a common phyllosilicate with perfect cleavage planes -- is an ideal system to investigate the details of ion hydration. The cleaved mica surface is decorated by an array of K$^+$ ions that can be easily exchanged with other ions or protons when immersed in an aqueous solution. Despite the vast interest in the atomic-scale hydration processes of these K$^+$ ions, experimental data under controlled conditions have remained elusive. Here, atomically resolved non-contact atomic force microscopy (nc-AFM) is combined with X-ray photoelectron spectroscopy (XPS) to investigate the cation hydration upon dosing water vapor at 100 K in ultra-high vacuum (UHV). The cleaved surface is further exposed to ultra-clean liquid water at room temperature, which promotes ion mobility and partial ion-to-proton substitution. The results offer the first direct experimental views of the interaction of water with muscovite mica in UHV. The findings are in line with previous theoretical predictions.
△ Less
Submitted 28 August, 2023;
originally announced August 2023.
-
Resolving the intrinsic short-range ordering of K$^+$ ions on cleaved muscovite mica
Authors:
Giada Franceschi,
Pavel Kocán,
Andrea Conti,
Sebastian Brandstetter,
Jan Balajka,
Igor Sokolović,
Markus Valtiner,
Florian Mittendorfer,
Michael Schmid,
Martin Setvín,
Ulrike Diebold
Abstract:
Muscovite mica, KAl$_2$(Si$_3$Al)O$_{10}$(OH)$_2$, is a common layered phyllosilicate with perfect cleavage planes. The atomically flat surfaces obtained through cleaving lend themselves to scanning probe techniques with atomic resolution and are ideal to model minerals and clays. Despite the importance of the cleaved mica surfaces, several questions remain unresolved. It is established that K…
▽ More
Muscovite mica, KAl$_2$(Si$_3$Al)O$_{10}$(OH)$_2$, is a common layered phyllosilicate with perfect cleavage planes. The atomically flat surfaces obtained through cleaving lend themselves to scanning probe techniques with atomic resolution and are ideal to model minerals and clays. Despite the importance of the cleaved mica surfaces, several questions remain unresolved. It is established that K$^+$ ions decorate the cleaved surface, but their intrinsic ordering -- unaffected by the interaction with the environment -- is not known. This work presents clear images of the K$^+$ distribution of cleaved mica obtained with low-temperature non-contact atomic force microscopy (AFM) under ultra-high vacuum (UHV) conditions. The data unveil the presence of short-range ordering, contrasting previous assumptions of random or fully ordered distributions. Density functional theory (DFT) calculations and Monte Carlo simulations show that the substitutional subsurface Al$^{3+}$ ions have an important role for the surface K$^+$ ion arrangement.
△ Less
Submitted 27 August, 2023;
originally announced August 2023.
-
The prototypical organic-oxide interface: intra-molecular resolution of sexiphenyl on In$_2$O$_3$(111)
Authors:
Margareta Wagner,
Jakob Hofinger,
Martin Setvín,
Lynn A. Boatner,
Michael Schmid,
Ulrike Diebold
Abstract:
The performance of an organic-semiconductor device is critically determined by the geometric alignment, orientation, and ordering of the organic molecules. While an organic multilayer eventually adopts the crystal structure of the organic material, the alignment and configuration at the interface with the substrate/electrode material is essential for charge injection into the organic layer. This w…
▽ More
The performance of an organic-semiconductor device is critically determined by the geometric alignment, orientation, and ordering of the organic molecules. While an organic multilayer eventually adopts the crystal structure of the organic material, the alignment and configuration at the interface with the substrate/electrode material is essential for charge injection into the organic layer. This work focuses on the prototypical organic semiconductor para-sexiphenyl (6P) adsorbed on In$_2$O$_3$(111), the thermodynamically most stable surface of the material that the most common transparent conducting oxide, indium tin oxide (ITO) is based on. The onset of nucleation and formation of the first monolayer are followed with atomically-resolved scanning tunneling microscopy (STM) and non-contact atomic force microscopy (nc-AFM). Annealing to 200$^\circ$C provides sufficient thermal energy for the molecules to orient themselves along the high-symmetry directions of the surface, leading to a single adsorption site. The AFM data suggests a twisted adsorption geometry. With increasing coverage, the 6P molecules first form a loose network with poor long-range order. Eventually the molecules re-orient and form an ordered monolayer. This first monolayer has a densely packed, well-ordered (2$\times$1) structure with one 6P per In$_2$O$_3$(111) substrate unit cell, i.e., a molecular density of 5.64$\times$10$^{13}$ cm$^{-2}$.
△ Less
Submitted 22 August, 2023;
originally announced August 2023.
-
Direct assessment of the proton affinity of individual surface hydroxyls with non-contact atomic force microscopy
Authors:
Margareta Wagner,
Bernd Meyer,
Martin Setvin,
Michael Schmid,
Ulrike Diebold
Abstract:
The state of protonation/deprotonation of surfaces has far-ranging implications in all areas of chemistry: from acid-base catalysis$^1$ and the electro- and photocatalytic splitting of water$^2$, to the behavior of minerals$^3$ and biochemistry$^4$. The acidity of a molecule or a surface site is described by its proton affinity (PA) and pK$_\mathrm{a}$ value (the negative logarithm of the equilibr…
▽ More
The state of protonation/deprotonation of surfaces has far-ranging implications in all areas of chemistry: from acid-base catalysis$^1$ and the electro- and photocatalytic splitting of water$^2$, to the behavior of minerals$^3$ and biochemistry$^4$. The acidity of a molecule or a surface site is described by its proton affinity (PA) and pK$_\mathrm{a}$ value (the negative logarithm of the equilibrium constant of the proton transfer reaction in solution). For solids, in contrast to molecules, the acidity of individual sites is difficult to assess. For mineral surfaces such as oxides they are estimated by semi-empirical concepts such as bond-order valence sums$^5$, and also increasingly modeled with first-principles molecular dynamics simulations$^{6,7}$. Currently such predictions cannot be tested - the experimental measures used for comparison are typically average quantities integrated over the whole surface or, in some cases, individual crystal facets$^8$, such as the point of zero charge (pzc)$^9$. Here we assess individual hydroxyls on In$_2$O$_3$(111), a model oxide with four different types of surface oxygen atoms, and probe the strength of their hydrogen bond with the tip of a non-contact atomic force microscope (AFM). The force curves are in quantitative agreement with density-functional theory (DFT) calculations. By relating the results to known proton affinities and pK$_\mathrm{a}$ values of gas-phase molecules, we provide a direct measure of proton affinity distributions at the atomic scale.
△ Less
Submitted 22 August, 2023;
originally announced August 2023.
-
A Multi-Technique Study of C2H4 Adsorption on Fe3O4(001)
Authors:
Lena Puntscher,
Panukorn Sombut,
Chunlei Wang,
Manuel Ulreich,
Jiri Pavelec,
Ali Rafsanjani-Abbasi,
Matthias Meier,
Adam Lagin,
Martin Setvin,
Ulrike Diebold,
Cesare Franchini,
Michael Schmid,
Gareth S. Parkinson
Abstract:
The adsorption/desorption of ethene (C2H4), also commonly known as ethylene, on Fe3O4(001) was studied under ultrahigh vacuum conditions using temperature programmed desorption (TPD), scanning tunneling microscopy, x-ray photoelectron spectroscopy, and density functional theory (DFT) based computations. To interpret the TPD data, we have employed a new analysis method based on equilibrium thermody…
▽ More
The adsorption/desorption of ethene (C2H4), also commonly known as ethylene, on Fe3O4(001) was studied under ultrahigh vacuum conditions using temperature programmed desorption (TPD), scanning tunneling microscopy, x-ray photoelectron spectroscopy, and density functional theory (DFT) based computations. To interpret the TPD data, we have employed a new analysis method based on equilibrium thermodynamics. C2H4 adsorbs intact at all coverages and interacts most strongly with surface defects such as antiphase domain boundaries and Fe adatoms. On the regular surface, C2H4 binds atop surface Fe sites up to a coverage of 2 molecules per (rt2xrt2)R45° unit cell, with every second Fe occupied. A desorption energy of 0.36 eV is determined by analysis of the TPD spectra at this coverage, which is approximately 0.1-0.2 eV lower than the value calculated by DFT + U with van der Waals corrections. Additional molecules are accommodated in between the Fe rows. These are stabilized by attractive interactions with the molecules adsorbed at Fe sites. The total capacity of the surface for C2H4 adsorption is found to be close to 4 molecules per (rt2xrt2)R45° unit cell.
△ Less
Submitted 22 August, 2023;
originally announced August 2023.
-
Real-space investigation of polarons in hematite Fe2O3
Authors:
Jesus Redondo,
Michele Reticcioli,
Vit Gabriel,
Dominik Wrana,
Florian Ellinger,
Michele Riva,
Giada Franceschi,
Erik Rheinfrank,
Igor Sokolovic,
Zdenek Jakub,
Florian Kraushofer,
Aji Alexander,
Laerte L. Patera,
Jascha Repp,
Michael Schmid,
Ulrike Diebold,
Gareth S. Parkinson,
Cesare Franchini,
Pavel Kocan,
Martin Setvin
Abstract:
In polarizable materials, electronic charge carriers interact with the surrounding ions, leading to quasiparticle behaviour. The resulting polarons play a central role in many materials properties including electrical transport, optical properties, surface reactivity and magnetoresistance, and polaron properties are typically investigated indirectly through such macroscopic characteristics. Here,…
▽ More
In polarizable materials, electronic charge carriers interact with the surrounding ions, leading to quasiparticle behaviour. The resulting polarons play a central role in many materials properties including electrical transport, optical properties, surface reactivity and magnetoresistance, and polaron properties are typically investigated indirectly through such macroscopic characteristics. Here, noncontact atomic force microscopy (nc-AFM) is used to directly image polarons in Fe2O3 at the single quasiparticle limit. A combination of Kelvin probe force microscopy (KPFM) and kinetic Monte Carlo (KMC) simulations shows that Ti do** dramatically enhances the mobility of electron polarons, and density functional theory (DFT) calculations indicate that a metallic transition state is responsible for the enhancement. In contrast, hole polarons are significantly less mobile and their hop** is hampered further by the introduction of trap** centres.
△ Less
Submitted 31 March, 2023;
originally announced March 2023.
-
Hematite $α-Fe_{2}O_{3}(0001)$ in top and side view: resolving long-standing controversies about its surface structure
Authors:
Jesús Redondo,
Jan Michalička,
Giada Franceschi,
Břetislav Šmid,
Nishant Kumar,
Ondřej Man,
Matthias Blatnik,
Dominik Wrana,
Florian Kraushofer,
Benjamin Mallada,
Martin Švec,
Gareth S. Parkinson,
Martin Setvin,
Michele Riva,
Ulrike Diebold,
Jan Čechal
Abstract:
Hematite $α-Fe_{2}O_{3}(0001)$ is the most-investigated iron oxide model system in photo and electrocatalytic research. The rich chemistry of Fe and O allows for many bulk and surface transformations, but their control is challenging. This has led to controversies regarding the structure of the topmost layers. This comprehensive study combines surface methods (nc-AFM, STM, LEED, and XPS) complemen…
▽ More
Hematite $α-Fe_{2}O_{3}(0001)$ is the most-investigated iron oxide model system in photo and electrocatalytic research. The rich chemistry of Fe and O allows for many bulk and surface transformations, but their control is challenging. This has led to controversies regarding the structure of the topmost layers. This comprehensive study combines surface methods (nc-AFM, STM, LEED, and XPS) complemented by structural and chemical analysis of the near-surface bulk (HRTEM and EELS). The results show that a compact 2D layer constitutes the topmost surface of $α-Fe_{2}O_{3}(0001)$; it is locally corrugated due to the mismatch with the bulk. Assessing the influence of naturally-occurring impurities shows that these can force the formation of surface phases that are not stable on pure samples. Impurities can also cause the formation of ill-defined inclusions in the subsurface and modify the oxidation phase diagram of hematite. The results provide a significant step forward in determining the hematite surface structure that is crucial for accurately modeling catalytic reactions. Combining surface and cross-sectional imaging provided the full view that is essential for understanding the evolution of the near-surface region of oxide surfaces under oxidative conditions.
△ Less
Submitted 10 March, 2023;
originally announced March 2023.
-
CO oxidation by Pt2/Fe3O4: metastable dimer and support configurations facilitate lattice oxygen extraction
Authors:
Matthias Meier,
Jan Hulva,
Zdenek Jakub,
Florian Kraushofer,
Mislav Bobić,
Roland Bliem,
Martin Setvin,
Michael Schmid,
Ulrike Diebold,
Cesare Franchini,
Gareth S. Parkinson
Abstract:
Heterogeneous catalysts based on sub-nanometer metal clusters often exhibit strongly size-dependent properties, and the addition or removal of a single atom can make all the difference. Identifying the most active species and deciphering the reaction mechanism is extremely difficult, however, because it is often not clear how the catalyst evolves in operando. Here, we utilize a combination of atom…
▽ More
Heterogeneous catalysts based on sub-nanometer metal clusters often exhibit strongly size-dependent properties, and the addition or removal of a single atom can make all the difference. Identifying the most active species and deciphering the reaction mechanism is extremely difficult, however, because it is often not clear how the catalyst evolves in operando. Here, we utilize a combination of atomically resolved scanning probe microscopies, spectroscopic techniques, and density functional theory (DFT)-based calculations to study CO oxidation by a model Pt/Fe3O4(001) single-atom catalyst. We demonstrate that (PtCO)2 dimers, formed dynamically through the agglomeration of mobile Pt-carbonyl species, catalyse a reaction involving the oxide support to form CO2. Pt2 dimers produce one CO2 molecule before falling apart into two adatoms, releasing the second CO. Interestingly, Olattice extraction only becomes facile when both the Pt-dimer and the Fe3O4 support can access metastable configurations, suggesting that substantial, concerted rearrangements of both cluster and support must be considered for reactions occurring at elevated temperature.
△ Less
Submitted 9 September, 2022;
originally announced September 2022.
-
Automated Real-Space Lattice Extraction for Atomic Force Microscopy Images
Authors:
Marco Corrias,
Lorenzo Papa,
Igor Sokolović,
Viktor Birschitzky,
Alexander Gorfer,
Martin Setvin,
Michael Schmid,
Ulrike Diebold,
Michele Reticcioli,
Cesare Franchini
Abstract:
Analyzing atomically resolved images is a time-consuming process requiring solid experience and substantial human intervention. In addition, the acquired images contain a large amount of information such as crystal structure, presence and distribution of defects, and formation of domains, which need to be resolved to understand a material's surface structure. Therefore, machine learning techniques…
▽ More
Analyzing atomically resolved images is a time-consuming process requiring solid experience and substantial human intervention. In addition, the acquired images contain a large amount of information such as crystal structure, presence and distribution of defects, and formation of domains, which need to be resolved to understand a material's surface structure. Therefore, machine learning techniques have been applied in scanning probe and electron microscopies during the last years, aiming for automatized and efficient image analysis. This work introduces a free and open source tool (AiSurf: Automated Identification of Surface Images) developed to inspect atomically resolved images via Scale-Invariant Feature Transform (SIFT) and Clustering Algorithms (CA). AiSurf extracts primitive lattice vectors, unit cells, and structural distortions from the original image, with no pre-assumption on the lattice and minimal user intervention. The method is applied to various atomically resolved non-contact atomic force microscopy (AFM) images of selected surfaces with different levels of complexity: anatase TiO2(101), oxygen deficient rutile TiO2(110) with and without CO adsorbates, SrTiO3(001) with Sr vacancies and graphene with C vacancies. The code delivers excellent results and has proved to be robust against atom misclassification and noise, thereby facilitating the interpretation scanning probe microscopy images.
△ Less
Submitted 28 August, 2022;
originally announced August 2022.
-
Competing electronic states emerging on polar surfaces
Authors:
Michele Reticcioli,
Zhichang Wang,
Michael Schmid,
Dominik Wrana,
Lynn A. Boatner,
Ulrike Diebold,
Martin Setvin,
Cesare Franchini
Abstract:
Excess charge on polar surfaces of ionic compounds is commonly described by the two-dimensional electron gas (2DEG) model, a homogeneous distribution of charge, spatially-confined in a few atomic layers. Here, by combining scanning probe microscopy with density functional theory calculations, we show that excess charge on the polar TaO$_2$ termination of KTaO$_3$(001) forms more complex electronic…
▽ More
Excess charge on polar surfaces of ionic compounds is commonly described by the two-dimensional electron gas (2DEG) model, a homogeneous distribution of charge, spatially-confined in a few atomic layers. Here, by combining scanning probe microscopy with density functional theory calculations, we show that excess charge on the polar TaO$_2$ termination of KTaO$_3$(001) forms more complex electronic states with different degrees of spatial and electronic localization: charge density waves (CDW) coexist with strongly-localized electron polarons and bipolarons. These surface electronic reconstructions, originating from the combined action of electron-lattice interaction and electronic correlation, are energetically more favorable than the 2DEG solution. They exhibit distinct spectroscopy signals and impact on the surface properties, as manifested by a local suppression of ferroelectric distortions. Controlling the degree of charge ordering and the transition from ferroelectric to paraelectric states could be of great benefit for the generation and transport of carriers in electronic applications.
△ Less
Submitted 1 July, 2022;
originally announced July 2022.
-
Does a pristine, unreconstructed SrTiO$_3$(001) surface exist?
Authors:
Igor Sokolović,
Giada Franceschi,
Zhichang Wang,
Jian Xu,
Jiří Pavelec,
Michele Riva,
Michael Schmid,
Ulrike Diebold,
Martin Setvín
Abstract:
The surfaces of perovskite oxides affect their functional properties, and while a bulk-truncated (1$\times$1) termination is generally assumed, its existence and stability is controversial. Here, such a surface is created by cleaving the prototypical SrTiO$_3$(001) in ultra-high vacuum, and its response to thermal annealing is observed. Atomically resolved nc-AFM shows that intrinsic point defects…
▽ More
The surfaces of perovskite oxides affect their functional properties, and while a bulk-truncated (1$\times$1) termination is generally assumed, its existence and stability is controversial. Here, such a surface is created by cleaving the prototypical SrTiO$_3$(001) in ultra-high vacuum, and its response to thermal annealing is observed. Atomically resolved nc-AFM shows that intrinsic point defects on the as-cleaved surface migrate at temperatures above 200\,$^\circ$C. At 400--500\,$^\circ$C, a disordered surface layer forms, albeit still with a (1$\times$1) pattern in LEED. Purely TiO$_2$-terminated surfaces, prepared by wet-chemical treatment, are also disordered despite their (1$\times$1) periodicity in LEED.
△ Less
Submitted 16 December, 2020;
originally announced December 2020.
-
Fast low-noise transimpedance amplifier for scanning tunneling microscopy and beyond
Authors:
Martin Štubian,
Juraj Bobek,
Martin Setvin,
Ulrike Diebold,
Michael Schmid
Abstract:
A transimpedance amplifier has been designed for scanning tunneling microscopy (STM). The amplifier features low noise (limited by the Johnson noise of the 1 GΩ feedback resistor at low input current and low frequencies), sufficient bandwidth for most STM applications (50 kHz at 35 pF input capacitance), a large dynamic range (0.1 pA--50 nA without range switching), and a low input voltage offset.…
▽ More
A transimpedance amplifier has been designed for scanning tunneling microscopy (STM). The amplifier features low noise (limited by the Johnson noise of the 1 GΩ feedback resistor at low input current and low frequencies), sufficient bandwidth for most STM applications (50 kHz at 35 pF input capacitance), a large dynamic range (0.1 pA--50 nA without range switching), and a low input voltage offset. The amplifier is also suited for placing its first stage into the cryostat of a low-temperature STM, minimizing the input capacitance and reducing the Johnson noise of the feedback resistor. The amplifier may also find applications for specimen current imaging and electron-beam-induced current measurements in scanning electron microscopy and as a photodiode amplifier with a large dynamic range. This paper also discusses the sources of noise including the often neglected effect of non-balanced input impedance of operational amplifiers and describes how to accurately measure and adjust the frequency response of low-current transimpedance amplifiers.
△ Less
Submitted 1 July, 2020;
originally announced July 2020.
-
Defect chemistry of Eu dopants in NaI scintillators studied by atomically resolved force microscopy
Authors:
Manuel Ulreich,
Lynn A. Boatner,
Igor Sokolovic,
Michele Reticcioli,
Flora Poelzleitner,
Cesare Franchini,
Michael Schmid,
Ulrike Diebold,
Martin Setvin
Abstract:
Activator impurities and their distribution in the host lattice play a key role in scintillation phenomena. Here a combination of cross-sectional noncontact atomic force microscopy (nc-AFM), X-ray photoelectron spectroscopy (XPS) and density functional theory (DFT) was used to study the distribution of Eu2+ dopants in a NaI scintillator activated by 3% of EuI2. Two types of precipitate structures…
▽ More
Activator impurities and their distribution in the host lattice play a key role in scintillation phenomena. Here a combination of cross-sectional noncontact atomic force microscopy (nc-AFM), X-ray photoelectron spectroscopy (XPS) and density functional theory (DFT) was used to study the distribution of Eu2+ dopants in a NaI scintillator activated by 3% of EuI2. Two types of precipitate structures were found. First, needle-shaped EuI2 precipitates with a layered structure are likely responsible for scattering the scintillation light. In transparent crystals with good scintillation properties, precipitates with a cubic crystal structure and a size below 4 nm were found. A surprisingly low concentration of point defects was detected in all of the investigated samples. Upon annealing, Eu segregates towards the surface, which results in the formation of an ordered hexagonal overlayer with the EuI2 composition and a pronounced, unidirectional moire pattern.
△ Less
Submitted 30 July, 2019; v1 submitted 5 September, 2018;
originally announced September 2018.
-
Incipient ferroelectricity: A route towards bulk-terminated SrTiO3
Authors:
Igor Sokolovic,
Michael Schmid,
Ulrike Diebold,
Martin Setvin
Abstract:
Perovskite oxides attract increasing attention due to their broad potential in many applications. Understanding their surfaces is challenging, though, because the ternary composition of the bulk allows for multiple stable surface terminations. We demonstrate a simple procedure for preparing the bulk-terminated (001) surface of SrTiO3, a prototypical cubic perovskite. Controlled application of stra…
▽ More
Perovskite oxides attract increasing attention due to their broad potential in many applications. Understanding their surfaces is challenging, though, because the ternary composition of the bulk allows for multiple stable surface terminations. We demonstrate a simple procedure for preparing the bulk-terminated (001) surface of SrTiO3, a prototypical cubic perovskite. Controlled application of strain on a SrTiO3 single crystal results in a flat cleavage with micrometer-size domains of SrO and TiO2. Distribution of these two terminations is dictated by ferroelectric domains induced by strain during the cleavage process. Atomically-resolved scanning tunneling microscopy/atomic force microscopy (STM/AFM) measurements reveal the presence of point defects in a well-defined concentration of (14+-2)%; Sr vacancies form at the SrO termination and complementary Sr adatoms appear at the TiO2 termination. These intrinsic defects are induced by the interplay between ferroelectricity, surface polarity, and surface charge.
△ Less
Submitted 24 July, 2018;
originally announced July 2018.
-
Interplay between adsorbates and polarons: CO on rutile TiO$_2$(110)
Authors:
Michele Reticcioli,
Igor Sokolović,
Michael Schmid,
Ulrike Diebold,
Martin Setvin,
Cesare Franchini
Abstract:
Polaron formation plays a major role in determining the structural, electrical and chemical properties of ionic crystals. Using a combination of first principles calculations and scanning tunneling microscpoy/atomic force microscopy (STM/AFM), we analyze the interaction of polarons with CO molecules adsorbed on the rutile TiO$_2$(110) surface. Adsorbed CO shows attractive coupling with polarons in…
▽ More
Polaron formation plays a major role in determining the structural, electrical and chemical properties of ionic crystals. Using a combination of first principles calculations and scanning tunneling microscpoy/atomic force microscopy (STM/AFM), we analyze the interaction of polarons with CO molecules adsorbed on the rutile TiO$_2$(110) surface. Adsorbed CO shows attractive coupling with polarons in the surface layer, and repulsive interaction with polarons in the subsurface layer. As a result, CO adsorption depends on the reduction state of the sample. For slightly reduced surfaces, many adsorption configurations with comparable adsorption energies exist and polarons reside in the subsurface layer. At strongly reduced surfaces, two adsorption configurations dominante: either inside an oxygen vacancy, or at surface Ti$_{5c}$ sites, coupled with a surface polaron.
△ Less
Submitted 16 July, 2018;
originally announced July 2018.
-
Formation and dynamics of small polarons on the rutile TiO$_2$(110) surface
Authors:
Michele Reticcioli,
Martin Setvin,
Michael Schmid,
Ulrike Diebold,
Cesare Franchini
Abstract:
Charge trap** and formation of polarons is a pervasive phenomenon in transition metal oxide compounds, in particular at the surface, affecting fundamental physical properties and functionalities of the hosting materials. Here we investigate via first-principle techniques the formation and dynamics of small polarons on the reduced surface of titanium dioxide, an archetypal system for polarons, fo…
▽ More
Charge trap** and formation of polarons is a pervasive phenomenon in transition metal oxide compounds, in particular at the surface, affecting fundamental physical properties and functionalities of the hosting materials. Here we investigate via first-principle techniques the formation and dynamics of small polarons on the reduced surface of titanium dioxide, an archetypal system for polarons, for a wide range of oxygen vacancy concentrations. We report how the essential features of polarons can be adequately accounted in terms of few quantities: the local structural and chemical environment, the attractive interaction between negatively charged polarons and positively charged oxygen vacancies, and the spin-dependent polaron-polaron Coulomb repulsion. We combined molecular dynamics simulations on realistic samples derived from experimental observations with simplified static models, aiming to disentangle the various variables at play. We find that depending on the specific trap** site, different types of polarons can be formed, with distinct orbital symmetries and different degree of localization and structural distortion. The energetically most stable polaron site is the subsurface Ti atom below the undercoordinated surface Ti atom, owing to a small energy cost to distort the lattice and a suitable electrostatic potential. Polaron-polaron repulsion and polaron-vacancy attraction determine the spatial distribution of polarons as well as the energy of the polaronic in-gap state. In the range of experimentally reachable oxygen vacancy concentrations the calculated data are in excellent agreement with observations, thus validating the overall interpretation.
△ Less
Submitted 4 May, 2018;
originally announced May 2018.
-
Charge Trap** at the Step Edges of TiO2 Anatase (101)
Authors:
Martin Setvin,
Xianfeng Hao,
Benjamin Daniel,
Jiri Pavelec,
Zbynek Novotny,
Gareth S. Parkinson,
Michael Schmid,
Georg Kresse,
Cesare Franchini,
Ulrike Diebold
Abstract:
A combination of Photoemission, Atomic Force and Scanning Tunneling Microscopy/Spectroscopy measurements shows that excess electrons in TiO2 anatase (101) surface are trapped at step edges. Consequently, steps act as preferred adsorption sites for O2. In Density Functional Theory calculations electrons localize at clean step edges, this tendency is enhanced by O vacancies and hydroxylation. The re…
▽ More
A combination of Photoemission, Atomic Force and Scanning Tunneling Microscopy/Spectroscopy measurements shows that excess electrons in TiO2 anatase (101) surface are trapped at step edges. Consequently, steps act as preferred adsorption sites for O2. In Density Functional Theory calculations electrons localize at clean step edges, this tendency is enhanced by O vacancies and hydroxylation. The results show the importance of defects for the wide-ranging applications of titania.
△ Less
Submitted 20 April, 2018;
originally announced April 2018.
-
Reaction of O2 with Subsurface Oxygen Vacancies on TiO2 Anatase (101)
Authors:
Martin Setvin,
Ulrich Aschauer,
Philipp Scheiber,
Ye-Fei Li,
Weiyi Hou,
Michael Schmid,
Annabella Selloni,
Ulrike Diebold
Abstract:
Oxygen (O2) adsorbed on metal oxides is important in catalytic oxidation reactions, chemical sensing, and photocatalysis. Strong adsorption requires transfer of negative charge from oxygen vacancies (VOs) or dopants, for example. With scanning tunneling microscopy, we observed, transformed, and, in conjunction with theory, identified the nature of O2 molecules on the (101) surface of anatase (tita…
▽ More
Oxygen (O2) adsorbed on metal oxides is important in catalytic oxidation reactions, chemical sensing, and photocatalysis. Strong adsorption requires transfer of negative charge from oxygen vacancies (VOs) or dopants, for example. With scanning tunneling microscopy, we observed, transformed, and, in conjunction with theory, identified the nature of O2 molecules on the (101) surface of anatase (titanium oxide, TiO2) doped with niobium. VOs reside exclusively in the bulk, but we pull them to the surface with a strongly negatively charged scanning tunneling microscope tip. O2 adsorbed as superoxo (O2)- at fivefold-coordinated Ti sites was transformed to peroxo (O2)2- and, via reaction with a VO, placed into an anion surface lattice site as an (O2)O species. This so-called bridging dimer also formed when O2 directly reacted with VOs at or below the surface.
△ Less
Submitted 13 April, 2018;
originally announced April 2018.
-
Aggregation and Electronically-Induced Migration of Oxygen Vacancies in TiO2 Anatase
Authors:
Martin Setvin,
Michael Schmid,
Ulrike Diebold
Abstract:
The influence of the electric field and electric current on the behavior of oxygen vacancies (VOs) in TiO2 anatase was investigated with Scanning Tunneling Microscopy (STM). At the anatase (101) surface VOs are not stable; they migrate into the bulk at temperatures above 200 K. Scanning a clean anatase (101) surface at a sample bias greater than +4.3 V results in surface VOs in the scanned area, s…
▽ More
The influence of the electric field and electric current on the behavior of oxygen vacancies (VOs) in TiO2 anatase was investigated with Scanning Tunneling Microscopy (STM). At the anatase (101) surface VOs are not stable; they migrate into the bulk at temperatures above 200 K. Scanning a clean anatase (101) surface at a sample bias greater than +4.3 V results in surface VOs in the scanned area, suggesting that subsurface VOs migrate back to the surface. To test this hypothesis, surface VOs were first created through bombardment with energetic electrons. The sample was then mildly annealed, which caused the VOs to move to the subsurface region, where they formed vacancy clusters. These VO clusters have various, distinct shapes. Scanning VO clusters with a high STM bias reproducibly converts them back into grou**s of surface VO, with a configuration that is characteristic for each type of cluster. The dependence of the subsurface-to-surface VO migration on the applied STM bias voltage, tunneling current, and sample temperature was investigated systematically. The results point towards a key role of energetic, 'hot' electrons in this process. The findings are closely related to the memristive behavior of oxides and oxygen diffusion in solid-oxide membranes.
△ Less
Submitted 13 April, 2018;
originally announced April 2018.
-
Subsurface Cation Vacancy Stabilization of the Magnetite (001) Surface
Authors:
R. Bliem,
E. McDermott,
P. Ferstl,
M. Setvin,
O. Gamba,
J. Pavelec,
M. A. Schneider,
M. Schmid,
U. Diebold,
P. Blaha,
L. Hammer,
G. S. Parkinson
Abstract:
Iron oxides play an increasingly prominent role in heterogeneous catalysis, hydrogen production, spintronics and drug delivery. The surface or material interface can be performance limiting in these applications, so it is vital to determine accurate atomic-scale structures for iron oxides and understand why they form. Using a combination of quantitative low-energy electron diffraction, scanning tu…
▽ More
Iron oxides play an increasingly prominent role in heterogeneous catalysis, hydrogen production, spintronics and drug delivery. The surface or material interface can be performance limiting in these applications, so it is vital to determine accurate atomic-scale structures for iron oxides and understand why they form. Using a combination of quantitative low-energy electron diffraction, scanning tunneling microscopy, and density functional theory calculations, we show that an ordered array of subsurface iron vacancies and interstitials underlies the well-known (rt2xrt2)R45° reconstruction of Fe3O4(001). This hitherto unobserved stabilization mechanism occurs because the iron oxides prefer to redistribute cations in the lattice in response to oxidizing or reducing environments. Many other metal oxides also achieve stoichiometric variation in this way, so such surface structures are likely commonplace.
△ Less
Submitted 13 April, 2018;
originally announced April 2018.
-
Sexiphenyl on Cu(100): nc-AFM tip functionalization and identification
Authors:
Margareta Wagner,
Martin Setvin,
Michael Schmid,
Ulrike Diebold
Abstract:
The contrast obtained in scanning tunneling microscopy (STM) and atomic force microscopy (AFM) images is determined by the tip termination and symmetry. Functionalizing the tip with a single metal atom, CO molecule or organic species has been shown to provide high spatial resolution and insights into tip-surface interactions. A topic where this concept is utilized is the adsorption of organic mole…
▽ More
The contrast obtained in scanning tunneling microscopy (STM) and atomic force microscopy (AFM) images is determined by the tip termination and symmetry. Functionalizing the tip with a single metal atom, CO molecule or organic species has been shown to provide high spatial resolution and insights into tip-surface interactions. A topic where this concept is utilized is the adsorption of organic molecules at surfaces. With this work we aim to contribute to the growing database of organic molecules that allow assignment by intra-molecular imaging. We investigated the organic molecule para-sexiphenyl (C36H26, 6P) on Cu(100) using low-temperature STM and non-contact AFM with intra-molecular resolution. In the sub-monolayer regime we find a planar and flat adsorption with the 6P molecules rotated 10° off the <010> directions. In this configuration, four of the six phenyl rings occupy almost equivalent sites on the surface. The 6P molecules are further investigated with CO- functionalized tips, in comparison to a single-atom metal and 6P-terminated tip. We also show that the procedure of using adsorbed CO to characterize tips introduced by Hofmann et al. Phys. Rev. B 112 (2014) 066101 is useful when the tip is terminated with an organic molecule.
△ Less
Submitted 21 March, 2018;
originally announced March 2018.
-
Water Agglomerates on Fe3O4(001)
Authors:
Matthias Meier,
Jan Hulva,
Zdenek Jakub,
Jiri Pavelec,
Martin Setvin,
Roland Bliem,
Michael Schmid,
Ulrike Diebold,
Cesare Franchini,
Gareth S. Parkinson
Abstract:
Determining the structure of water adsorbed on solid surfaces is a notoriously difficult task, and pushes the limits of experimental and theoretical techniques. Here, we follow the evolution of water agglomerates on Fe3O4(001); a complex mineral surface relevant in both modern technology and the natural environment. Strong OH-H2O bonds drive the formation of partially-dissociated water dimers at l…
▽ More
Determining the structure of water adsorbed on solid surfaces is a notoriously difficult task, and pushes the limits of experimental and theoretical techniques. Here, we follow the evolution of water agglomerates on Fe3O4(001); a complex mineral surface relevant in both modern technology and the natural environment. Strong OH-H2O bonds drive the formation of partially-dissociated water dimers at low coverage, but a surface reconstruction restricts the density of such species to one per unit cell. The dimers act as an anchor for further water molecules as the coverage increases, leading first to partially-dissociated water trimers, and then to a ring-like, hydrogen-bonded network that covers the entire surface. Unraveling this complexity requires the concerted application of several state-of-the-art methods. Quantitative temperature programmed desorption (TPD) reveals the coverage of stable structures, monochromatic x-ray photoelectron spectroscopy (XPS) shows the extent of partial dissociation, and non-contact Atomic Force Microscopy (AFM) using a CO-functionalized tip provides a direct view of the agglomerate structure. Together, these data provide a stringent test of the minimum energy configurations determined via a van der Waals density functional theory (DFT)-based genetic search.
△ Less
Submitted 29 January, 2018;
originally announced January 2018.
-
A direct view at excess electrons in TiO$_2$ rutile and anatase
Authors:
Martin Setvin,
Cesare Franchini,
Xianfeng Hao,
Michael Schmid,
Anderson Janotti,
Merzuk Kaltak,
Chris Van de Walle,
Georg Kresse,
Ulrike Diebold
Abstract:
A combination of Scanning Tunneling Microscopy/Spectroscopy and Density Functional Theory (DFT+U) is used to characterize excess electrons in TiO$_2$ rutile and anatase, two prototypical materials with identical chemical composition but different crystal lattices. In rutile, excess electrons can localize at any lattice Ti atom, forming a small polaron, which can easily hop to neighboring sites. In…
▽ More
A combination of Scanning Tunneling Microscopy/Spectroscopy and Density Functional Theory (DFT+U) is used to characterize excess electrons in TiO$_2$ rutile and anatase, two prototypical materials with identical chemical composition but different crystal lattices. In rutile, excess electrons can localize at any lattice Ti atom, forming a small polaron, which can easily hop to neighboring sites. In contrast, electrons in anatase prefer a free-carrier state, and can only be trapped near oxygen vacancies or form shallow donor states bound to Nb dopants. The present study conclusively explains the differences between the two polymorphs and indicates that even small structural variations in the crystal lattice can lead to a very different behavior.
△ Less
Submitted 29 July, 2014; v1 submitted 30 January, 2014;
originally announced January 2014.
-
Real Space Imaging of the Verwey Transition at the (100) Surface of Magnetite
Authors:
Juan de la Figuera,
Zbynek Novotny,
Martin Setvin,
Tijiang Liu,
Zhiqiang Mao,
Gong Chen,
Alpha T. N'Diaye,
Michael Schmid,
Ulrike Diebold,
Andreas K. Schmid,
Gareth S. Parkinson
Abstract:
Effects of the Verwey transition on the (100) surface of magnetite were studied using scanning tunelling microscopy and spin polarized low-energy electron microsccopy. On cooling through the transition temperature Tv, the initially flat surface undergoes a roof-like distortion with a periodicity of ~0.5 um due to ferroelastic twinning within monoclinic domains of the low-temperature monoclinic str…
▽ More
Effects of the Verwey transition on the (100) surface of magnetite were studied using scanning tunelling microscopy and spin polarized low-energy electron microsccopy. On cooling through the transition temperature Tv, the initially flat surface undergoes a roof-like distortion with a periodicity of ~0.5 um due to ferroelastic twinning within monoclinic domains of the low-temperature monoclinic structure. The monoclinic c axis orients in the surface plane, along the [001]c directions. At the atomic scale, the charge-ordered sqrt2xsqrt2R45 reconstruction of the (100) surface is unperturbed by the bulk transition, and is continuous over the twin boundaries. Time resolved low-energy electron microscopy movies reveal the structural transition to be first-order at the surface, indicating that the bulk transition is not an extension of the Verwey-like sqrt2xsqrt2R45 reconstruction. Although conceptually similar, the charge-ordered phases of the (100) surface and sub-Tv bulk of magnetite are unrelated phenomena.
△ Less
Submitted 4 October, 2013;
originally announced October 2013.
-
Heterogeneous nucleation and adatom detachment at 1-D growth of Indium on Si(100)-2x1
Authors:
Jakub Javorský,
Martin Setvín,
Ivan Ošt'ádal,
Pavel Sobotík,
Miroslav Kotrla
Abstract:
Growth of atomic indium chains - 1D islands - on the Si(100)-2x1 surface was observed by scanning tunneling microscopy (STM) at room temperature and simulated by means of a kinetic Monte Carlo method. Density of indium islands and island size distribution were obtained for various deposition rates and coverage. STM observation of growth during deposition of indium provided information on growth…
▽ More
Growth of atomic indium chains - 1D islands - on the Si(100)-2x1 surface was observed by scanning tunneling microscopy (STM) at room temperature and simulated by means of a kinetic Monte Carlo method. Density of indium islands and island size distribution were obtained for various deposition rates and coverage. STM observation of growth during deposition of indium provided information on growth kinetics and relaxation of grown layers. Important role of C-type defects at adsorption of metal atoms was observed. Measured growth characteristics were simulated using a microscopic model with anisotropic surface diffusion and forbidden zones along the metal chains. An analysis of experimental and simulation data shows that detachment of indium adatoms from the chains substantially influences a growth scenario and results in monotonously decreasing chain length distribution function at low coverage. Diffusion barriers determined from the simulations correspond to almost isotropic diffusion of indium adatoms on the surface. The results are discussed with respect to data reported in earlier papers for other metals.
△ Less
Submitted 29 December, 2008;
originally announced December 2008.
