Showing 1–50 of 53 results for author: Seryi, A

Positron Beams At Ce$^+$BAF

Authors: J. Grames, J. Benesch, M. Bruker, L. Cardman, S. Covrig, P. Ghoshal, S. Gopinath, J. Gubeli, S. Habet, C. Hernandez-Garcia, A. Hofler, R. Kazimi, F. Lin, S. Nagaitsev, M. Poelker, B. Rimmer, Y. Roblin, V. Lizarraga-Rubio, A. Seryi, M. Spata, A. Sy, D. Turner, A. Ushakov, C. A. Valerio-Lizarraga, E. Voutier

Abstract: We present a scheme for the generation of a high polarization positron beam with continous wave (CW) bunch structure for the Continuous Electron Beam Accelerator Facility (CEBAF) at Jefferson Laboratory (JLab). The positrons are created in a high average power conversion target and collected by a CW capture linac and DC solenoid. We present a scheme for the generation of a high polarization positron beam with continous wave (CW) bunch structure for the Continuous Electron Beam Accelerator Facility (CEBAF) at Jefferson Laboratory (JLab). The positrons are created in a high average power conversion target and collected by a CW capture linac and DC solenoid. △ Less

Submitted 27 September, 2023; originally announced September 2023.

Comments: 4 pages, 4 figures, 1 table, contributed to IPAC'23

Strong Interaction Physics at the Luminosity Frontier with 22 GeV Electrons at Jefferson Lab

Authors: A. Accardi, P. Achenbach, D. Adhikari, A. Afanasev, C. S. Akondi, N. Akopov, M. Albaladejo, H. Albataineh, M. Albrecht, B. Almeida-Zamora, M. Amaryan, D. Androić, W. Armstrong, D. S. Armstrong, M. Arratia, J. Arrington, A. Asaturyan, A. Austregesilo, H. Avagyan, T. Averett, C. Ayerbe Gayoso, A. Bacchetta, A. B. Balantekin, N. Baltzell, L. Barion , et al. (419 additional authors not shown)

Abstract: This document presents the initial scientific case for upgrading the Continuous Electron Beam Accelerator Facility (CEBAF) at Jefferson Lab (JLab) to 22 GeV. It is the result of a community effort, incorporating insights from a series of workshops conducted between March 2022 and April 2023. With a track record of over 25 years in delivering the world's most intense and precise multi-GeV electron… ▽ More This document presents the initial scientific case for upgrading the Continuous Electron Beam Accelerator Facility (CEBAF) at Jefferson Lab (JLab) to 22 GeV. It is the result of a community effort, incorporating insights from a series of workshops conducted between March 2022 and April 2023. With a track record of over 25 years in delivering the world's most intense and precise multi-GeV electron beams, CEBAF's potential for a higher energy upgrade presents a unique opportunity for an innovative nuclear physics program, which seamlessly integrates a rich historical background with a promising future. The proposed physics program encompass a diverse range of investigations centered around the nonperturbative dynamics inherent in hadron structure and the exploration of strongly interacting systems. It builds upon the exceptional capabilities of CEBAF in high-luminosity operations, the availability of existing or planned Hall equipment, and recent advancements in accelerator technology. The proposed program cover various scientific topics, including Hadron Spectroscopy, Partonic Structure and Spin, Hadronization and Transverse Momentum, Spatial Structure, Mechanical Properties, Form Factors and Emergent Hadron Mass, Hadron-Quark Transition, and Nuclear Dynamics at Extreme Conditions, as well as QCD Confinement and Fundamental Symmetries. Each topic highlights the key measurements achievable at a 22 GeV CEBAF accelerator. Furthermore, this document outlines the significant physics outcomes and unique aspects of these programs that distinguish them from other existing or planned facilities. In summary, this document provides an exciting rationale for the energy upgrade of CEBAF to 22 GeV, outlining the transformative scientific potential that lies within reach, and the remarkable opportunities it offers for advancing our understanding of hadron physics and related fundamental phenomena. △ Less

Submitted 24 August, 2023; v1 submitted 13 June, 2023; originally announced June 2023.

Comments: Updates to the list of authors; Preprint number changed from theory to experiment; Updates to sections 4 and 6, including additional figures

Report number: JLAB-PHY-23-3840

Large-Aperture High-Field NB3SN Magnets for the 2nd EIC Interaction Region*

Authors: A. V. Zlobin, I. Novitski, E. Barzi, B. R. Gamage, A. Seryi

Abstract: The design concept of the Electron Ion Collider (EIC), which is under construction at BNL, considers adding a 2nd Interaction Region (IR) and detector to the machine after completion of the present EIC project. Recent progress with development and fabrication of large-aperture high-field magnets based on the Nb3Sn technology for the HL-LHC makes this technology interesting for the 2nd EIC IR. This… ▽ More The design concept of the Electron Ion Collider (EIC), which is under construction at BNL, considers adding a 2nd Interaction Region (IR) and detector to the machine after completion of the present EIC project. Recent progress with development and fabrication of large-aperture high-field magnets based on the Nb3Sn technology for the HL-LHC makes this technology interesting for the 2nd EIC IR. This paper summarizes the results of feasibility studies of large-aperture high-field Nb3Sn dipoles and quadrupoles for the 2nd EIC IR. △ Less

Submitted 11 May, 2023; originally announced May 2023.

Comments: 14th International Particle Accelerator Conference (IPAC'23)

Report number: FERMILAB-CONF-23-164-TD

Strategies in Education, Outreach, and Inclusion to Enhance the US Workforce in Accelerator Science and Engineering

Authors: M. Bai, W. A. Barletta, D. L. Bruhwiler, S. Chattopadhyay, Y. Hao, S. Holder, J. Holzbauer, Z. Huang, K. Harkay, Y. -K. Kim, X. Lu, S. M. Lund, N. Neveu, P. Ostroumov, J. R. Patterson, P. Piot, T. Satogata, A. Seryi, A. K. Soha, S. Winchester

Abstract: We summarize the community-based consensus for improvements concerning education, public outreach, and inclusion in Accelerator Science and Engineering that will enhance the workforce in the USA. The improvements identified reflect the product of discussions held within the 2021-2022 Snowmass community planning process by topical group AF1: Beam Physics and Accelerator Education within the Acceler… ▽ More We summarize the community-based consensus for improvements concerning education, public outreach, and inclusion in Accelerator Science and Engineering that will enhance the workforce in the USA. The improvements identified reflect the product of discussions held within the 2021-2022 Snowmass community planning process by topical group AF1: Beam Physics and Accelerator Education within the Accelerator Frontier. Although the Snowmass process centers on high-energy physics, this document outlines required improvements for the entire U.S. accelerator science and engineering enterprise because education of those entering and in the field, outreach to the public, and inclusion are inextricably linked. △ Less

Submitted 16 March, 2022; originally announced March 2022.

Comments: Submitted to Snowmass 2021 Accelerator Frontier, Topical Group AF1: Beam Physics and Accelerator Education

Accelerator and Beam Physics: Grand Challenges and Research Opportunities

Authors: S. Nagaitsev, V. Shiltsev, A. Valishev, T. Zolkin, J. -L. Vay, M. Bai, Y. Cai, M. J. Hogan, Z. Huang, J. Seeman, B. Dunham, X. Huang, T. Roser, M. Minty, J. Rosenzweig, P. Piot, J. Power, J. M. Byrd, A. Seryi, S. Lund, J. R. Patterson

Abstract: Accelerator and beam physics (ABP) is the science of the motion, generation, acceleration, manipulation, prediction, observation and use of charged particle beams. It focuses on fundamental long-term accelerator and beam physics research and development. Accelerator and beam physics research has resulted in important advances in accelerator science, yet support for this research is declining. NSF… ▽ More Accelerator and beam physics (ABP) is the science of the motion, generation, acceleration, manipulation, prediction, observation and use of charged particle beams. It focuses on fundamental long-term accelerator and beam physics research and development. Accelerator and beam physics research has resulted in important advances in accelerator science, yet support for this research is declining. NSF has terminated its program in accelerator Science and funding by DOE through GARD and Accelerator Stewardship has been steady or declining. The declining support for accelerator research will slow advances and threaten student training and work-force development in accelerator science. We propose a robust and scientifically challenging program in accelerator and beam physics, which will position the field of US High Energy Physics to be productive and competitive for decades to come. △ Less

Submitted 13 March, 2022; originally announced March 2022.

Comments: Contribution to Snowmass 2021. arXiv admin note: substantial text overlap with arXiv:2101.04107

Design concept for the second interaction region for Electron-Ion Collider

Authors: B. R. Gamage, E. -C. Aschenauer, J. S. Berg, V. Burkert, R. Ent, Y. Furletova, D. Higinbotham, A. Hutton, C. Hyde, A. Jentsch, A. Kiselev, F. Lin, T. Michalski, C. Montag, V. S. Morozov, P. Nadel-Turonski, R. Palmer, B. Parker, V. Ptitsyn, R. Rajput-Ghoshal, D. Romanov, T. Satogata, A. Seryi, A. Sy, C. Weiss , et al. (5 additional authors not shown)

Abstract: The possibility of two interaction regions (IRs) is a design requirement for the Electron Ion Collider (the EIC). There is also a significant interest from the nuclear physics community in a 2nd IR with measurements capabilities complementary to those of the first IR. While the 2nd IR will be in operation over the entire energy range of ~20GeV to ~140GeV center of mass (CM). The 2nd IR can also pr… ▽ More The possibility of two interaction regions (IRs) is a design requirement for the Electron Ion Collider (the EIC). There is also a significant interest from the nuclear physics community in a 2nd IR with measurements capabilities complementary to those of the first IR. While the 2nd IR will be in operation over the entire energy range of ~20GeV to ~140GeV center of mass (CM). The 2nd IR can also provide an acceptance coverage complementary to that of the first. We present a brief overview and the current progress of the 2nd IR design in terms of the parameters, magnet layout, and beam dynamics. △ Less

Submitted 20 August, 2021; v1 submitted 27 May, 2021; originally announced May 2021.

Comments: To be published in the proceedings of IPAC'21

Accelerator and Beam Physics Research Goals and Opportunities

Authors: S. Nagaitsev, Z. Huang, J. Power, J. -L. Vay, P. Piot, L. Spentzouris, J. Rosenzweig, Y. Cai, S. Cousineau, M. Conde, M. Hogan, A. Valishev, M. Minty, T. Zolkin, X. Huang, V. Shiltsev, J. Seeman, J. Byrd, Y. Hao, B. Dunham, B. Carlsten, A. Seryi, R. Patterson

Abstract: This report is a summary of two preparatory workshops, documenting the community vision for the national accelerator and beam physics research program. It identifies the Grand Challenges of accelerator and beam physics (ABP) field and documents research opportunities to address these Grand Challenges. This report will be used to develop a strategic research roadmap for the field of accelerator sci… ▽ More This report is a summary of two preparatory workshops, documenting the community vision for the national accelerator and beam physics research program. It identifies the Grand Challenges of accelerator and beam physics (ABP) field and documents research opportunities to address these Grand Challenges. This report will be used to develop a strategic research roadmap for the field of accelerator science. △ Less

Submitted 25 January, 2021; v1 submitted 11 January, 2021; originally announced January 2021.

Report number: FERMILAB-FN-1123

The Large Hadron-Electron Collider at the HL-LHC

Authors: P. Agostini, H. Aksakal, S. Alekhin, P. P. Allport, N. Andari, K. D. J. Andre, D. Angal-Kalinin, S. Antusch, L. Aperio Bella, L. Apolinario, R. Apsimon, A. Apyan, G. Arduini, V. Ari, A. Armbruster, N. Armesto, B. Auchmann, K. Aulenbacher, G. Azuelos, S. Backovic, I. Bailey, S. Bailey, F. Balli, S. Behera, O. Behnke , et al. (312 additional authors not shown)

Abstract: The Large Hadron electron Collider (LHeC) is designed to move the field of deep inelastic scattering (DIS) to the energy and intensity frontier of particle physics. Exploiting energy recovery technology, it collides a novel, intense electron beam with a proton or ion beam from the High Luminosity--Large Hadron Collider (HL-LHC). The accelerator and interaction region are designed for concurrent el… ▽ More The Large Hadron electron Collider (LHeC) is designed to move the field of deep inelastic scattering (DIS) to the energy and intensity frontier of particle physics. Exploiting energy recovery technology, it collides a novel, intense electron beam with a proton or ion beam from the High Luminosity--Large Hadron Collider (HL-LHC). The accelerator and interaction region are designed for concurrent electron-proton and proton-proton operation. This report represents an update of the Conceptual Design Report (CDR) of the LHeC, published in 2012. It comprises new results on parton structure of the proton and heavier nuclei, QCD dynamics, electroweak and top-quark physics. It is shown how the LHeC will open a new chapter of nuclear particle physics in extending the accessible kinematic range in lepton-nucleus scattering by several orders of magnitude. Due to enhanced luminosity, large energy and the cleanliness of the hadronic final states, the LHeC has a strong Higgs physics programme and its own discovery potential for new physics. Building on the 2012 CDR, the report represents a detailed updated design of the energy recovery electron linac (ERL) including new lattice, magnet, superconducting radio frequency technology and further components. Challenges of energy recovery are described and the lower energy, high current, 3-turn ERL facility, PERLE at Orsay, is presented which uses the LHeC characteristics serving as a development facility for the design and operation of the LHeC. An updated detector design is presented corresponding to the acceptance, resolution and calibration goals which arise from the Higgs and parton density function physics programmes. The paper also presents novel results on the Future Circular Collider in electron-hadron mode, FCC-eh, which utilises the same ERL technology to further extend the reach of DIS to even higher centre-of-mass energies. △ Less

Submitted 12 April, 2021; v1 submitted 28 July, 2020; originally announced July 2020.

Comments: 373 pages, many figures, to be published by J. Phys. G

Report number: CERN-ACC-Note-2020-0002

Journal ref: J.Phys.G 48 (2021) 11, 110501

FCC-hh Experimental Insertion Region Design

Authors: Jose L. Abelleira, Robert B. Appleby, Sergey Arsenyev, Javier Barranco, Michael Benedikt, Maria Ilaria Besana, Oscar Blanco Garcia, Manuela Boscolo, David Boutin, Xavier Buffat, Helmut Burkhardt, Francesco Cerutti, Antoine Chance, Francesco Collamati, Emilia Cruz-Alaniz, Barbara Dalena, Michael Hofer, Barbara L. Humann, Angelo Infantino, Jacqueline Keintzel, Andy Langner, Marian Luckhof, Roman Martin, Tatiana Pieloni, Haroon Rafique , et al. (7 additional authors not shown)

Abstract: The Future Circular Collider study is exploring possible designs of circular colliders for the post-LHC era, as recommended by the European Strategy Group for High Energy Physics. One such option is FCC-hh, a proton-proton collider with a centre-of-mass energy of 100 TeV. The experimental insertion regions are key areas defining the performance of the collider. This paper presents the first insert… ▽ More The Future Circular Collider study is exploring possible designs of circular colliders for the post-LHC era, as recommended by the European Strategy Group for High Energy Physics. One such option is FCC-hh, a proton-proton collider with a centre-of-mass energy of 100 TeV. The experimental insertion regions are key areas defining the performance of the collider. This paper presents the first insertion region designs with a complete assessment of the main challenges, as collision debris with two orders of magnitude larger power than current colliders, beam-beam interactions in long insertions, dynamic aperture for optics with peak $β$ functions one order of magnitude above current colliders, photon background from synchrotron radiation and cross talk between the insertion regions. An alternative design avoiding the use of crab cavities with a small impact on performance is also presented. △ Less

Submitted 23 July, 2020; originally announced July 2020.

Comments: 74 pages

Experimental studies of 7-cell dual axis asymmetric cavity for energy recovery linac

Authors: I. V. Konoplev, K. Metodiev, A. J. Lancaster, G. Burt, R. Ainsworth, A. Seryi

Abstract: High average current, transportable energy recovery linacs (ERLs) can be very attractive tools for a number of applications including next generation high-luminosity, compact light sources. Conventional ERLs are based on an electron beam circulating through the same set of rf cavity cells. This leads to an accumulation of high-order modes inside the cavity cells, resulting in the development of a… ▽ More High average current, transportable energy recovery linacs (ERLs) can be very attractive tools for a number of applications including next generation high-luminosity, compact light sources. Conventional ERLs are based on an electron beam circulating through the same set of rf cavity cells. This leads to an accumulation of high-order modes inside the cavity cells, resulting in the development of a beam breakup (BBU) instability, unless the beam current is kept below the BBU start current. This limits the maximum current which can be transported through the ERL and hence the intensity of the photon beam generated. It has recently been proposed that splitting the accelerating and decelerating stages, tuning them separately and coupling them via a resonance coupler can increase the BBU start current. The paper presents the first experimental rf studies of a dual axis 7-cell asymmetric cavity and confirms the properties predicted by the theoretical model. The field structures of the symmetric and asymmetric modes are measured and good agreement with the numerical predictions is demonstrated. The operating mode field flatness was also measured and discussed. A novel approach based on the coupled mode (Fano-like) model has been developed for the description of the cavity Eigenmode spectrum and good agreement between analytical theory, numerical predictions and experimental data is shown. Numerical and experimental results observed are analyzed, discussed and a good agreement between theory and experiment is demonstrated. △ Less

Submitted 1 December, 2017; originally announced December 2017.

Comments: 12 pp

Report number: Fermilab-Pub-17-480-AD

Journal ref: Phys.Rev.Accel.Beams 20, 103501, 2017

Compact ring-based X-ray source with on-orbit and on-energy laser-plasma injection

Authors: Marlene Turner, Jeremy Cheatam, Auralee Edelen, James Gerity, Andrew Lajoie, Gerard Lawler, Osip Lishilin, Kook** Moon, Aakash Ajit Sahai, Andrei Seryi, Kai Shih, Brandon Zerbe

Abstract: We report here the results of a one week long investigation into the conceptual design of an X-ray source based on a compact ring with on-orbit and on-energy laser-plasma accelerator. We performed these studies during the June 2016 USPAS class "Physics of Accelerators, Lasers, and Plasma..." applying the art of inventiveness TRIZ. We describe three versions of the light source with the constraints… ▽ More We report here the results of a one week long investigation into the conceptual design of an X-ray source based on a compact ring with on-orbit and on-energy laser-plasma accelerator. We performed these studies during the June 2016 USPAS class "Physics of Accelerators, Lasers, and Plasma..." applying the art of inventiveness TRIZ. We describe three versions of the light source with the constraints of the electron beam with energy $1\,\rm{GeV}$ or $3\,\rm{GeV}$ and a magnetic lattice design being normal conducting (only for the $1\,\rm{GeV}$ beam) or superconducting (for either beam). The electron beam recirculates in the ring, to increase the effective photon flux. We describe the design choices, present relevant parameters, and describe insights into such machines. △ Less

Submitted 17 October, 2016; originally announced October 2016.

Comments: 4 pages, 1 figure, Conference Proceedings of NAPAC 2016

Concept of a Staged FEL Enabled by Fast Synchrotron Radiation Cooling of Laser-Plasma Accelerated Beam by Solenoidal Magnetic Fields in Plasma Bubble

Authors: Andrei Seryi, Zsolt Lesz, Alexander Andreev, Ivan Konoplev

Abstract: A novel method for generating GigaGauss solenoidal field in laser-plasma bubble, using screw-shaped laser pulses, has been recently presented in arXiv:1604.01259 [physics.plasm-ph]. Such magnetic fields enable fast synchrotron radiation cooling of the beam emittance of laser-plasma accelerated leptons. This recent finding opens a novel approach for design of laser-plasma FELs or colliders, where t… ▽ More A novel method for generating GigaGauss solenoidal field in laser-plasma bubble, using screw-shaped laser pulses, has been recently presented in arXiv:1604.01259 [physics.plasm-ph]. Such magnetic fields enable fast synchrotron radiation cooling of the beam emittance of laser-plasma accelerated leptons. This recent finding opens a novel approach for design of laser-plasma FELs or colliders, where the acceleration stages are interleaved with laser-plasma emittance cooling stages. In this concept paper we present an outline of how a staged plasma-acceleration FEL could look like and discuss further studies needed to investigate the feasibility of the concept in detail. △ Less

Submitted 17 July, 2017; v1 submitted 17 September, 2016; originally announced September 2016.

Accelerating Science TRIZ inventive methodology in illustrations

Authors: Elena Seraia, Andrei Seryi

Abstract: Theory of Inventive Problem Solving (TRIZ) is a powerful tool widely used in engineering community. It is based on identification of a physical contradiction in a problem, and based on the corresponding pair of contradicting parameters selecting a few of suitable inventive principles, narrowing down the choice and leading to a much faster solution of a problem. It is remarkable that TRIZ methodolo… ▽ More Theory of Inventive Problem Solving (TRIZ) is a powerful tool widely used in engineering community. It is based on identification of a physical contradiction in a problem, and based on the corresponding pair of contradicting parameters selecting a few of suitable inventive principles, narrowing down the choice and leading to a much faster solution of a problem. It is remarkable that TRIZ methodology can also be applied to scientific disciplines. Many of TRIZ inventive principles can be post factum identified in various in scientific inventions and discoveries. However, additional inventive principles, more suitable for scientific disciplines, should be introduced and added to standard TRIZ, and some of the standard inventive principles need to be reformulated to be better applicable to science - we call this extension Accelerating Science TRIZ. In this short note we describe and illustrate the AS-TRIZ inventive principles via scientific examples, identifying AS-TRIZ inventive principles in discoveries and inventions originated from physics, biology, and other areas. This brief note, we believe, is yet one more step towards bringing TRIZ methodology closer into the scientific community. △ Less

Submitted 29 July, 2016; originally announced August 2016.

GigaGauss solenoidal magnetic field inside of bubbles excited in under-dense plasma

Authors: Zsolt Lecz, Ivan V. Konoplev, Andrei Seryi, Alexander Andreev

Abstract: Magnetic fields have a crucial role in physics at all scales, from astrophysics to nanoscale phenomena. Large fields, constant or pulsed, allow investigation of material in extreme conditions, opening up plethora of practical applications based on ultra-fast process, and studying phenomena existing only in exotic astro-objects like neutron stars or pulsars. Magnetic fields are indispensable in par… ▽ More Magnetic fields have a crucial role in physics at all scales, from astrophysics to nanoscale phenomena. Large fields, constant or pulsed, allow investigation of material in extreme conditions, opening up plethora of practical applications based on ultra-fast process, and studying phenomena existing only in exotic astro-objects like neutron stars or pulsars. Magnetic fields are indispensable in particle accelerators, for guiding the relativistic particles along a curved trajectory and for making them radiate in synchrotron light sources and in free electron lasers. In the presented paper we propose a novel and effective method for generating solenoidal quasi-static magnetic field on the GigaGauss level and beyond, in under-dense plasma, using screw-shaped high intensity laser pulses. In comparison with already known techniques which typically rely on interaction with over-dense or solid targets, where radial or toroidal magnetic field localized at the stationary target were generated, our method allows to produce gigantic solenoidal fields, which is co-moving with the driving laser pulse and collinear with accelerated electrons. The solenoidal field is quasi-stationary in the reference frame of the laser pulse and can be used for guiding electron beams and providing synchrotron radiation beam emittance cooling for laser-plasma accelerated electron and positron beams, opening up novel opportunities for designs of the light sources, free electron lasers, and high energy colliders based on laser plasma acceleration. △ Less

Submitted 5 July, 2016; v1 submitted 5 April, 2016; originally announced April 2016.

Comments: 15 pages, 9 figures. Main text (without abstract, References and Appendix): 12 pages

AWAKE, The Advanced Proton Driven Plasma Wakefield Acceleration Experiment at CERN

Authors: E. Gschwendtner, E. Adli, L. Amorim, R. Apsimon, R. Assmann, A. -M. Bachmann, F. Batsch, J. Bauche, V. K. Berglyd Olsen, M. Bernardini, R. Bingham, B. Biskup, T. Bohl, C. Bracco, P. N. Burrows, G. Burt, B. Buttenschon, A. Butterworth, A. Caldwell, M. Cascella, E. Chevallay, S. Cipiccia, H. Damerau, L. Deacon, P. Dirksen , et al. (66 additional authors not shown)

Abstract: The Advanced Proton Driven Plasma Wakefield Acceleration Experiment (AWAKE) aims at studying plasma wakefield generation and electron acceleration driven by proton bunches. It is a proof-of-principle R&D experiment at CERN and the world's first proton driven plasma wakefield acceleration experiment. The AWAKE experiment will be installed in the former CNGS facility and uses the 400 GeV/c proton be… ▽ More The Advanced Proton Driven Plasma Wakefield Acceleration Experiment (AWAKE) aims at studying plasma wakefield generation and electron acceleration driven by proton bunches. It is a proof-of-principle R&D experiment at CERN and the world's first proton driven plasma wakefield acceleration experiment. The AWAKE experiment will be installed in the former CNGS facility and uses the 400 GeV/c proton beam bunches from the SPS. The first experiments will focus on the self-modulation instability of the long (rms ~12 cm) proton bunch in the plasma. These experiments are planned for the end of 2016. Later, in 2017/2018, low energy (~15 MeV) electrons will be externally injected to sample the wakefields and be accelerated beyond 1 GeV. The main goals of the experiment will be summarized. A summary of the AWAKE design and construction status will be presented. △ Less

Submitted 17 December, 2015; originally announced December 2015.

Comments: 7 pages, 7 figures, 2 tables

Path to AWAKE: Evolution of the concept

Authors: A. Caldwell, E. Adli, L. Amorim, R. Apsimon, T. Argyropoulos, R. Assmann, A. -M. Bachmann, F. Batsch, J. Bauche, V. K. Berglyd Olsen, M. Bernardini, R. Bingham, B. Biskup, T. Bohl, C. Bracco, P. N. Burrows, G. Burt, B. Buttenschon, A. Butterworth, M. Cascella, S. Chattopadhyay, E. Chevallay, S. Cipiccia, H. Damerau, L. Deacon , et al. (96 additional authors not shown)

Abstract: This report describes the conceptual steps in reaching the design of the AWAKE experiment currently under construction at CERN. We start with an introduction to plasma wakefield acceleration and the motivation for using proton drivers. We then describe the self-modulation instability --- a key to an early realization of the concept. This is then followed by the historical development of the experi… ▽ More This report describes the conceptual steps in reaching the design of the AWAKE experiment currently under construction at CERN. We start with an introduction to plasma wakefield acceleration and the motivation for using proton drivers. We then describe the self-modulation instability --- a key to an early realization of the concept. This is then followed by the historical development of the experimental design, where the critical issues that arose and their solutions are described. We conclude with the design of the experiment as it is being realized at CERN and some words on the future outlook. A summary of the AWAKE design and construction status as presented in this conference is given in [1]. △ Less

Submitted 29 November, 2015; originally announced November 2015.

Comments: 15 pages, 24 figures, 1 table, 111 references, 121 author from 36 organizations

Asymmetric Dual Axis Energy Recovery Linac for Ultra-High Flux sources of coherent X-ray/THz radiation: Investigations Towards its Ultimate Performance

Authors: R. Ainsworth, G. Burt, I. V. Konoplev, A. Seryi

Abstract: In order for sources of coherent high brightness and intensity THz and X-Ray radiation to be accepted by university or industrial R&D laboratories, truly compact, high current and efficient particle accelerators are required. The demand for compactness and efficiency can be satisfied by superconducting RF energy recovery linear accelerators (SRF ERL) allowing effectively minimising the footprint a… ▽ More In order for sources of coherent high brightness and intensity THz and X-Ray radiation to be accepted by university or industrial R&D laboratories, truly compact, high current and efficient particle accelerators are required. The demand for compactness and efficiency can be satisfied by superconducting RF energy recovery linear accelerators (SRF ERL) allowing effectively minimising the footprint and maximising the efficiency of the system. However such set-ups are affected by regenerative beam-break up (BBU) instabilities which limit the beam current and may terminate the beam transport as well as energy recuperation. In this paper we suggest and discuss a SRF ERL with asymmetric configuration of resonantly coupled accelerating and decelerating cavities. In this type of SRF ERL an electron bunch is passing through accelerating and decelerating cavities once and, as we show in this case, the regenerative BBU instability can be minimised allowing high currents to be achieved. We study the BBU start current in such an asymmetric ERL via analytical and numerical models and discuss the properties of such a system. △ Less

Submitted 7 July, 2016; v1 submitted 11 September, 2015; originally announced September 2015.

FAFNIR: Strategy and risk reduction in accelerator driven neutron sources for fusion materials irradiation data

Authors: E. Surrey, M. Porton, A. Caballero, T. Davenne, D. Findlay, A. Letchford, J. Thomason, J. Marrow, S. Roberts, A. Seryi, B. Connolly, P. Mummery, H. Owen

Abstract: The need to populate the fusion materials engineering data base has long been recognized, the IFMIF facility being the present proposed neutron source for this purpose. Re-evaluation of the regulatory approach for the EU proposed DEMO device shows that the specification of the neutron source can be reduced with respect to IFMIF, allowing lower risk technology solutions to be considered. The justif… ▽ More The need to populate the fusion materials engineering data base has long been recognized, the IFMIF facility being the present proposed neutron source for this purpose. Re-evaluation of the regulatory approach for the EU proposed DEMO device shows that the specification of the neutron source can be reduced with respect to IFMIF, allowing lower risk technology solutions to be considered. The justification for this approach is presented and a description of a proposed facility, FAFNIR, is presented with more detailed discussion of the accelerator and target designs. △ Less

Submitted 2 December, 2014; originally announced December 2014.

Comments: 7 pages, 4 figures. arXiv admin note: text overlap with arXiv:1407.5660. text overlap with arXiv:1407.5660

Journal ref: Proceedings of the 11th International Symposium on Fusion Nuclear Technology (ISFNT-11) Barcelona, Spain, 15-20 September, 2013. Fusion Engineering and Design, Vol.89, Issues 9-10, October 2014, pp.2108-2113

Reducing Risk and Accelerating Delivery of a Neutron Source for Fusion Materials Research

Authors: E. Surrey, M. Porton, T. Davenne, D. Findlay, A. Letchford, J. Thomason, S. G. Roberts, J. Marrow, A. Seryi, B. Connolly, H. Owen

Abstract: The materials engineering data base relevant to fusion irradiation is poorly populated and it has long been recognized that a fusion spectrum neutron source will be required, the facility IFMIF being the present proposal. Re- evaluation of the regulatory approach for the EU proposed DEMO device shows that the purpose of the source can be changed from lifetime equivalent irradiation exposure to dat… ▽ More The materials engineering data base relevant to fusion irradiation is poorly populated and it has long been recognized that a fusion spectrum neutron source will be required, the facility IFMIF being the present proposal. Re- evaluation of the regulatory approach for the EU proposed DEMO device shows that the purpose of the source can be changed from lifetime equivalent irradiation exposure to data generation at lower levels of exposure by adopting a defence in depth strategy and regular component surveillance. This reduces the specification of the source with respect to IFMIF allowing lower risk technology solutions to be considered. A description of such a source, the Facility for Fusion Neutron Irradiation Research, FAFNIR, is presented here along with project timescales and costs. △ Less

Submitted 18 July, 2014; originally announced July 2014.

Comments: 8 pages, 3 figures

Journal ref: Fusion Engineering and Design, Vol.89, Issue 4, April 2014, p.273-279

Experimental and Theoretical Progress of Linear Collider Final Focus Design and ATF2 Facility

Authors: Andrei Seryi, Rogelio Tomas, Frank Zimmermann, Kiyoshi Kubo, Shigeru Kuroda, Toshiyuki Okugi, Toshiaki Tauchi, Nobuhiro Terunuma, Junji Urakawa, Glen White, Mark Woodley, Deepa Angal-Kalinin

Abstract: In this brief overview we will reflect on the process of the design of the linear collider (LC) final focus (FF) optics, and will also describe the theoretical and experimental efforts on design and practical realisation of a prototype of the LC FF optics implemented in the ATF2 facility at KEK, Japan, presently being commissioned and operated. In this brief overview we will reflect on the process of the design of the linear collider (LC) final focus (FF) optics, and will also describe the theoretical and experimental efforts on design and practical realisation of a prototype of the LC FF optics implemented in the ATF2 facility at KEK, Japan, presently being commissioned and operated. △ Less

Submitted 8 April, 2014; originally announced April 2014.

Journal ref: Nuclear Inst. and Methods in Physics Research A 740 (2014) 2-5

Multi-Pulse Laser Wakefield Acceleration: A New Route to Efficient, High-Repetition-Rate Plasma Accelerators and High Flux Radiation Sources

Authors: S. M. Hooker, R. Bartolini, S. P. D. Mangles, A. Tünnermann, L. Corner, J. Limpert, A. Seryi, R. Walczak

Abstract: Laser-driven plasma accelerators can generate accelerating gradients three orders of magnitude larger than radio-frequency accelerators and have achieved beam energies above 1 GeV in centimetre long stages. However, the pulse repetition rate and wall-plug efficiency of plasma accelerators is limited by the driving laser to less than approximately 1 Hz and 0.1% respectively. Here we investigate the… ▽ More Laser-driven plasma accelerators can generate accelerating gradients three orders of magnitude larger than radio-frequency accelerators and have achieved beam energies above 1 GeV in centimetre long stages. However, the pulse repetition rate and wall-plug efficiency of plasma accelerators is limited by the driving laser to less than approximately 1 Hz and 0.1% respectively. Here we investigate the prospects for exciting the plasma wave with trains of low-energy laser pulses rather than a single high-energy pulse. Resonantly exciting the wakefield in this way would enable the use of different technologies, such as fibre or thin-disc lasers, which are able to operate at multi-kilohertz pulse repetition rates and with wall-plug efficiencies two orders of magnitude higher than current laser systems. We outline the parameters of efficient, GeV-scale, 10-kHz plasma accelerators and show that they could drive compact X-ray sources with average photon fluxes comparable to those of third-generation light source but with significantly improved temporal resolution. Likewise FEL operation could be driven with comparable peak power but with significantly larger repetition rates than extant FELs. △ Less

Submitted 30 January, 2014; originally announced January 2014.

The International Linear Collider Technical Design Report - Volume 3.I: Accelerator R&D in the Technical Design Phase

Authors: Chris Adolphsen, Maura Barone, Barry Barish, Karsten Buesser, Philip Burrows, John Carwardine, Jeffrey Clark, Hélène Mainaud Durand, Gerry Dugan, Eckhard Elsen, Atsushi Enomoto, Brian Foster, Shigeki Fukuda, Wei Gai, Martin Gastal, Rongli Geng, Camille Ginsburg, Susanna Guiducci, Mike Harrison, Hitoshi Hayano, Keith Kershaw, Kiyoshi Kubo, Victor Kuchler, Benno List, Wanming Liu , et al. (19 additional authors not shown)

Abstract: The International Linear Collider Technical Design Report (TDR) describes in four volumes the physics case and the design of a 500 GeV centre-of-mass energy linear electron-positron collider based on superconducting radio-frequency technology using Niobium cavities as the accelerating structures. The accelerator can be extended to 1 TeV and also run as a Higgs factory at around 250 GeV and on the… ▽ More The International Linear Collider Technical Design Report (TDR) describes in four volumes the physics case and the design of a 500 GeV centre-of-mass energy linear electron-positron collider based on superconducting radio-frequency technology using Niobium cavities as the accelerating structures. The accelerator can be extended to 1 TeV and also run as a Higgs factory at around 250 GeV and on the Z0 pole. A comprehensive value estimate of the accelerator is give, together with associated uncertainties. It is shown that no significant technical issues remain to be solved. Once a site is selected and the necessary site-dependent engineering is carried out, construction can begin immediately. The TDR also gives baseline documentation for two high-performance detectors that can share the ILC luminosity by being moved into and out of the beam line in a "push-pull" configuration. These detectors, ILD and SiD, are described in detail. They form the basis for a world-class experimental programme that promises to increase significantly our understanding of the fundamental processes that govern the evolution of the Universe. △ Less

Submitted 26 June, 2013; originally announced June 2013.

Comments: See also http://www.linearcollider.org/ILC/TDR . The full list of signatories is inside the Report

Report number: ILC-REPORT-2013-040; ANL-HEP-TR-13-20; BNL-100603-2013-IR; IRFU-13-59; CERN-ATS-2013-037; Cockcroft-13-10; CLNS 13/2085; DESY 13-062; FERMILAB TM-2554; IHEP-AC-ILC-2013-001; INFN-13-04/LNF; JAI-2013-001; JINR E9-2013-35; JLAB-R-2013-01; KEK Report 2013-1; KNU/CHEP-ILC-2013-1; LLNL-TR-635539; SLAC-R-1004; ILC-HiGrade-Report-2013-003

The International Linear Collider Technical Design Report - Volume 3.II: Accelerator Baseline Design

Authors: Chris Adolphsen, Maura Barone, Barry Barish, Karsten Buesser, Philip Burrows, John Carwardine, Jeffrey Clark, Hélène Mainaud Durand, Gerry Dugan, Eckhard Elsen, Atsushi Enomoto, Brian Foster, Shigeki Fukuda, Wei Gai, Martin Gastal, Rongli Geng, Camille Ginsburg, Susanna Guiducci, Mike Harrison, Hitoshi Hayano, Keith Kershaw, Kiyoshi Kubo, Victor Kuchler, Benno List, Wanming Liu , et al. (19 additional authors not shown)

Abstract: The International Linear Collider Technical Design Report (TDR) describes in four volumes the physics case and the design of a 500 GeV centre-of-mass energy linear electron-positron collider based on superconducting radio-frequency technology using Niobium cavities as the accelerating structures. The accelerator can be extended to 1 TeV and also run as a Higgs factory at around 250 GeV and on the… ▽ More The International Linear Collider Technical Design Report (TDR) describes in four volumes the physics case and the design of a 500 GeV centre-of-mass energy linear electron-positron collider based on superconducting radio-frequency technology using Niobium cavities as the accelerating structures. The accelerator can be extended to 1 TeV and also run as a Higgs factory at around 250 GeV and on the Z0 pole. A comprehensive value estimate of the accelerator is give, together with associated uncertainties. It is shown that no significant technical issues remain to be solved. Once a site is selected and the necessary site-dependent engineering is carried out, construction can begin immediately. The TDR also gives baseline documentation for two high-performance detectors that can share the ILC luminosity by being moved into and out of the beam line in a "push-pull" configuration. These detectors, ILD and SiD, are described in detail. They form the basis for a world-class experimental programme that promises to increase significantly our understanding of the fundamental processes that govern the evolution of the Universe. △ Less

Submitted 26 June, 2013; originally announced June 2013.

Comments: See also http://www.linearcollider.org/ILC/TDR . The full list of signatories is inside the Report

Report number: ILC-REPORT-2013-040; ANL-HEP-TR-13-20; BNL-100603-2013-IR; IRFU-13-59; CERN-ATS-2013-037; Cockcroft-13-10; CLNS 13/2085; DESY 13-062; FERMILAB TM-2554; IHEP-AC-ILC-2013-001; INFN-13-04/LNF; JAI-2013-001; JINR E9-2013-35; JLAB-R-2013-01; KEK Report 2013-1; KNU/CHEP-ILC-2013-1; LLNL-TR-635539; SLAC-R-1004; ILC-HiGrade-Report-2013-003

On the Relation of the LHeC and the LHC

Authors: J. L. Abelleira Fernandez, C. Adolphsen, P. Adzic, A. N. Akay, H. Aksakal, J. L. Albacete, B. Allanach, S. Alekhin, P. Allport, V. Andreev, R. B. Appleby, E. Arikan, N. Armesto, G. Azuelos, M. Bai, D. Barber, J. Bartels, O. Behnke, J. Behr, A. S. Belyaev, I. Ben-Zvi, N. Bernard, S. Bertolucci, S. Bettoni, S. Biswal , et al. (184 additional authors not shown)

Abstract: The present note relies on the recently published conceptual design report of the LHeC and extends the first contribution to the European strategy debate in emphasising the role of the LHeC to complement and complete the high luminosity LHC programme. The brief discussion therefore focuses on the importance of high precision PDF and $α_s$ determinations for the physics beyond the Standard Model (G… ▽ More The present note relies on the recently published conceptual design report of the LHeC and extends the first contribution to the European strategy debate in emphasising the role of the LHeC to complement and complete the high luminosity LHC programme. The brief discussion therefore focuses on the importance of high precision PDF and $α_s$ determinations for the physics beyond the Standard Model (GUTs, SUSY, Higgs). Emphasis is also given to the importance of high parton density phenomena in nuclei and their relevance to the heavy ion physics programme at the LHC. △ Less

Submitted 9 January, 2013; v1 submitted 21 November, 2012; originally announced November 2012.

A Large Hadron Electron Collider at CERN

Authors: J. L. Abelleira Fernandez, C. Adolphsen, P. Adzic, A. N. Akay, H. Aksakal, J. L. Albacete, B. Allanach, S. Alekhin, P. Allport, V. Andreev, R. B. Appleby, E. Arikan, N. Armesto, G. Azuelos, M. Bai, D. Barber, J. Bartels, O. Behnke, J. Behr, A. S. Belyaev, I. Ben-Zvi, N. Bernard, S. Bertolucci, S. Bettoni, S. Biswal , et al. (184 additional authors not shown)

Abstract: This document provides a brief overview of the recently published report on the design of the Large Hadron Electron Collider (LHeC), which comprises its physics programme, accelerator physics, technology and main detector concepts. The LHeC exploits and develops challenging, though principally existing, accelerator and detector technologies. This summary is complemented by brief illustrations of s… ▽ More This document provides a brief overview of the recently published report on the design of the Large Hadron Electron Collider (LHeC), which comprises its physics programme, accelerator physics, technology and main detector concepts. The LHeC exploits and develops challenging, though principally existing, accelerator and detector technologies. This summary is complemented by brief illustrations of some of the highlights of the physics programme, which relies on a vastly extended kinematic range, luminosity and unprecedented precision in deep inelastic scattering. Illustrations are provided regarding high precision QCD, new physics (Higgs, SUSY) and electron-ion physics. The LHeC is designed to run synchronously with the LHC in the twenties and to achieve an integrated luminosity of O(100) fb$^{-1}$. It will become the cleanest high resolution microscope of mankind and will substantially extend as well as complement the investigation of the physics of the TeV energy scale, which has been enabled by the LHC. △ Less

Submitted 9 January, 2013; v1 submitted 20 November, 2012; originally announced November 2012.

Educating and Training Accelerator Scientists and Technologists for Tomorrow

Authors: William A. Barletta, Swapan Chattopadhyay, Andrei Seryi

Abstract: Accelerator science and technology is inherently an integrative discipline that combines aspects of physics, computational science, electrical and mechanical engineering. As few universities offer full academic programs, the education of accelerator physicists and engineers for the future has primarily relied on a combination of on-the-job training supplemented with intense courses at regional acc… ▽ More Accelerator science and technology is inherently an integrative discipline that combines aspects of physics, computational science, electrical and mechanical engineering. As few universities offer full academic programs, the education of accelerator physicists and engineers for the future has primarily relied on a combination of on-the-job training supplemented with intense courses at regional accelerator schools. This paper describes the approaches being used to satisfy the educational interests of a growing number of interested physicists and engineers. △ Less

Submitted 13 August, 2012; v1 submitted 12 July, 2012; originally announced July 2012.

Comments: 19 pages, 3 figures

Present status and first results of the final focus beam line at the KEK Accelerator Test Facility

Authors: P. Bambade, M. Alabau Pons, J. Amann, D. Angal-Kalinin, R. Apsimon, S. Araki, A. Aryshev, S. Bai, P. Bellomo, D. Bett, G. Blair, B. Bolzon, S. Boogert, G. Boorman, P. N. Burrows, G. Christian, P. Coe, B. Constance, Jean-Pierre Delahaye, L. Deacon, E. Elsen, A. Faus-Golfe, M. Fukuda, J. Gao, N. Geffroy , et al. (69 additional authors not shown)

Abstract: ATF2 is a final-focus test beam line which aims to focus the low emittance beam from the ATF dam** ring to a vertical size of about 37 nm and to demonstrate nanometer level beam stability. Several advanced beam diagnostics and feedback tools are used. In December 2008, construction and installation were completed and beam commissioning started, supported by an international team of Asian, Europe… ▽ More ATF2 is a final-focus test beam line which aims to focus the low emittance beam from the ATF dam** ring to a vertical size of about 37 nm and to demonstrate nanometer level beam stability. Several advanced beam diagnostics and feedback tools are used. In December 2008, construction and installation were completed and beam commissioning started, supported by an international team of Asian, European, and U.S. scientists. The present status and first results are described. △ Less

Submitted 5 July, 2012; originally announced July 2012.

Comments: 10 pp

Report number: FERMILAB-PUB-10-290-AD

Journal ref: Phys.Rev.ST Accel.Beams 13 (2010) 042801

A Large Hadron Electron Collider at CERN: Report on the Physics and Design Concepts for Machine and Detector

Authors: J. L. Abelleira Fernandez, C. Adolphsen, A. N. Akay, H. Aksakal, J. L. Albacete, S. Alekhin, P. Allport, V. Andreev, R. B. Appleby, E. Arikan, N. Armesto, G. Azuelos, M. Bai, D. Barber, J. Bartels, O. Behnke, J. Behr, A. S. Belyaev, I. Ben-Zvi, N. Bernard, S. Bertolucci, S. Bettoni, S. Biswal, J. Blümlein, H. Böttcher , et al. (168 additional authors not shown)

Abstract: The physics programme and the design are described of a new collider for particle and nuclear physics, the Large Hadron Electron Collider (LHeC), in which a newly built electron beam of 60 GeV, up to possibly 140 GeV, energy collides with the intense hadron beams of the LHC. Compared to HERA, the kinematic range covered is extended by a factor of twenty in the negative four-momentum squared,… ▽ More The physics programme and the design are described of a new collider for particle and nuclear physics, the Large Hadron Electron Collider (LHeC), in which a newly built electron beam of 60 GeV, up to possibly 140 GeV, energy collides with the intense hadron beams of the LHC. Compared to HERA, the kinematic range covered is extended by a factor of twenty in the negative four-momentum squared, $Q^2$, and in the inverse Bjorken $x$, while with the design luminosity of $10^{33}$ cm$^{-2}$s$^{-1}$ the LHeC is projected to exceed the integrated HERA luminosity by two orders of magnitude. The physics programme is devoted to an exploration of the energy frontier, complementing the LHC and its discovery potential for physics beyond the Standard Model with high precision deep inelastic scattering measurements. These are designed to investigate a variety of fundamental questions in strong and electroweak interactions. The physics programme also includes electron-deuteron and electron-ion scattering in a $(Q^2, 1/x)$ range extended by four orders of magnitude as compared to previous lepton-nucleus DIS experiments for novel investigations of neutron's and nuclear structure, the initial conditions of Quark-Gluon Plasma formation and further quantum chromodynamic phenomena. The LHeC may be realised either as a ring-ring or as a linac-ring collider. Optics and beam dynamics studies are presented for both versions, along with technical design considerations on the interaction region, magnets and further components, together with a design study for a high acceptance detector. Civil engineering and installation studies are presented for the accelerator and the detector. The LHeC can be built within a decade and thus be operated while the LHC runs in its high-luminosity phase. It thus represents a major opportunity for progress in particle physics exploiting the investment made in the LHC. △ Less

Submitted 7 September, 2012; v1 submitted 13 June, 2012; originally announced June 2012.

Status report of the baseline collimation system of CLIC. Part II

Authors: J. Resta-Lopez, D. Angal-Kalinin, B. Dalena, J. L. Fernandez-Hernando, F. Jackson, D. Schulte, A. Seryi, R. Tomas

Abstract: Important efforts have recently been dedicated to the characterisation and improvement of the design of the post-linac collimation system of the Compact Linear Collider (CLIC). This system consists of two sections: one dedicated to the collimation of off-energy particles and another one for betatron collimation. The energy collimation system is further conceived as protection system against damage… ▽ More Important efforts have recently been dedicated to the characterisation and improvement of the design of the post-linac collimation system of the Compact Linear Collider (CLIC). This system consists of two sections: one dedicated to the collimation of off-energy particles and another one for betatron collimation. The energy collimation system is further conceived as protection system against damage by errant beams. In this respect, special attention is paid to the optimisation of the energy collimator design. The material and the physical parameters of the energy collimators are selected to withstand the impact of an entire bunch train. Concerning the betatron collimation section, different aspects of the design have been optimised: the transverse collimation depths have been recalculated in order to reduce the collimator wakefield effects while maintaining a good efficiency in cleaning the undesired beam halo; the geometric design of the spoilers has been reviewed to minimise wakefields; in addition, the optics design has been optimised to improve the collimation efficiency. This report presents the current status of the the post-linac collimation system of CLIC. Part II is mainly dedicated to the study of the betatron collimation system and collimator wakefield effects. △ Less

Submitted 13 April, 2011; originally announced April 2011.

Comments: 25 pages, 13 figures

Status report of the baseline collimation system of CLIC. Part I

Authors: J. Resta-Lopez, D. Angal-Kalinin, B. Dalena, J. L. Fernandez-Hernando, F. Jackson, D. Schulte, A. Seryi, R. Tomas

Abstract: Important efforts have recently been dedicated to the characterisation and improvement of the design of the post-linac collimation system of the Compact Linear Collider (CLIC). This system consists of two sections: one dedicated to the collimation of off-energy particles and another one for betatron collimation. The energy collimation system is further conceived as protection system against damage… ▽ More Important efforts have recently been dedicated to the characterisation and improvement of the design of the post-linac collimation system of the Compact Linear Collider (CLIC). This system consists of two sections: one dedicated to the collimation of off-energy particles and another one for betatron collimation. The energy collimation system is further conceived as protection system against damage by errant beams. In this respect, special attention is paid to the optimisation of the energy collimator design. The material and the physical parameters of the energy collimators are selected to withstand the impact of an entire bunch train. Concerning the betatron collimation section, different aspects of the design have been optimised: the transverse collimation depths have been recalculated in order to reduce the collimator wakefield effects while maintaining a good efficiency in cleaning the undesired beam halo; the geometric design of the spoilers has been reviewed to minimise wakefields; in addition, the optics design has been optimised to improve the collimation efficiency. This report presents the current status of the the post-linac collimation system of CLIC. Part I of this report is dedicated to the study of the CLIC energy collimation system. △ Less

Submitted 13 April, 2011; originally announced April 2011.

Comments: 22 pages, 14 figures

Tevatron Electron Lenses: Design and Operation

Authors: Vladimir Shiltsev, Kip Bishofberger, Vsevolod Kamerdzhiev, Sergei Kozub, Matthew Kufer, Gennady Kuznetsov, Alexander Martinez, Marvin Olson, Howard Pfeffer, Greg Saewert, Vic Scarpine, Andrey Seryi, Nikolai Solyak, Veniamin Sytnik, Mikhail Tiunov, Leonid Tkachenko, David Wildman, Daniel Wolff, Xiao-Long Zhang

Abstract: The beam-beam effects have been the dominating sources of beam loss and lifetime limitations in the Tevatron proton-antiproton collider [1]. Electron lenses were originally proposed for compensation of electromagnetic long-range and head-on beam-beam interactions of proton and antiproton beams [2]. Results of successful employment of two electron lenses built and installed in the Tevatron are re… ▽ More The beam-beam effects have been the dominating sources of beam loss and lifetime limitations in the Tevatron proton-antiproton collider [1]. Electron lenses were originally proposed for compensation of electromagnetic long-range and head-on beam-beam interactions of proton and antiproton beams [2]. Results of successful employment of two electron lenses built and installed in the Tevatron are reported in [3,4,5]. In this paper we present design features of the Tevatron electron lenses (TELs), discuss the generation of electron beams, describe different modes of operation and outline the technical parameters of various subsystems. △ Less

Submitted 11 August, 2008; originally announced August 2008.

Comments: submitted to Phys. Rev. ST-AB

Report number: FERMILAB-PUB-08-298-APC

Journal ref: Phys.Rev.ST Accel.Beams 11:103501,2008

Design of an interaction region with head-on collisions for the ILC

Authors: R. Appleby, D. Angal-Kalinin, F. Jackson, M . Alabau-Pons, P. Bambade, J. Brossard, O. Dadoun, C. Rimbault, L. Keller, Y. Nosochkov, A. Seryi, J. Payet, O. Napoly, C. Rippon, D. Uriot

Abstract: An interaction region (IR) with head-on collisions is considered as an alternative to the baseline configuration of the International Linear Collider (ILC) which includes two IRs with finite crossing-angles (2 and 20 mrad). Although more challenging for the beam extraction, the head-on scheme is favoured by the experiments because it allows a more convenient detector configuration, particularly… ▽ More An interaction region (IR) with head-on collisions is considered as an alternative to the baseline configuration of the International Linear Collider (ILC) which includes two IRs with finite crossing-angles (2 and 20 mrad). Although more challenging for the beam extraction, the head-on scheme is favoured by the experiments because it allows a more convenient detector configuration, particularly in the forward region. The optics of the head-on extraction is revisited by separating the e+ and e- beams horizontally, first by electrostatic separators operated at their LEP nominal field and then using a defocusing quadrupole of the final focus beam line. In this way the septum magnet is protected from the beamstrahlung power. Newly optimized final focus and extraction optics are presented, including a first look at post-collision diagnostics. The influence of parasitic collisions is shown to lead to a region of stable collision parameters. Disrupted beam and beamstrahlung photon losses are calculated along the extraction elements. △ Less

Submitted 28 September, 2006; originally announced September 2006.

Report number: LAL/RT 06-09, EUROTeV-Report-2006-083

Journal ref: Conf.Proc.C060626:682-684,2006

The 2 mrad crossing-angle ILC interaction region and extraction line

Authors: R. Appleby, D. Angal-Kalinin, P. Bambade, O. Dadoun, B. Parker, L. Keller, K. Moffeit, Y. Nosochkov, A. Seryi, C. Spencer, J. Carter, O. Napoly

Abstract: A complete optics design for the 2mrad crossing angle interaction region and extraction line was presented at Snowmass 2005. Since this time, the design task force has been working on develo** and improving the performance of the extraction line. The work has focused on optimising the final doublet parameters and on reducing the power losses resulting from the disrupted beam transport. In this… ▽ More A complete optics design for the 2mrad crossing angle interaction region and extraction line was presented at Snowmass 2005. Since this time, the design task force has been working on develo** and improving the performance of the extraction line. The work has focused on optimising the final doublet parameters and on reducing the power losses resulting from the disrupted beam transport. In this paper, the most recent status of the 2mrad layout and the corresponding performance are presented. △ Less

Submitted 19 July, 2006; originally announced July 2006.

Comments: Contribution to the Tenth European Particle Accelerator Conference `"EPAC'06'', Edinburgh, United-Kingdom, 26-30 June 2006

Report number: LAL/RT 06-07, EUROTeV-Report-2006-053

Parameters for a Super-Flavor-Factory

Authors: J. T. Seeman, Y. Cai, S. Ecklund, A. Novokhatski, A. Seryi, M. Sullivan, U. Wienands, M. Biagini, P. Raimondi

Abstract: A Super Flavor Factory, an asymmetric energy e+e- collider with a luminosity of order 10^36 cm-2s-1, can provide a sensitive probe of new physics in the flavor sector of the Standard Model. The success of the PEP-II and KEKB asymmetric colliders in producing unprecedented luminosity above 10^34 cm-2s-1 has taught us about the accelerator physics of asymmetric e+e- colliders in a new parameter re… ▽ More A Super Flavor Factory, an asymmetric energy e+e- collider with a luminosity of order 10^36 cm-2s-1, can provide a sensitive probe of new physics in the flavor sector of the Standard Model. The success of the PEP-II and KEKB asymmetric colliders in producing unprecedented luminosity above 10^34 cm-2s-1 has taught us about the accelerator physics of asymmetric e+e- colliders in a new parameter regime. Furthermore, the success of the SLAC Linear Collider and the subsequent work on the International Linear Collider allow a new Super-Flavor collider to also incorporate linear collider techniques. This note describes the parameters of an asymmetric Flavor-Factory collider at a luminosity of order 10^36 cm-2s-1 at the Upsilon(4S) resonance and about 10^35 cm-2s-1 at the Tau production threshold. Such a collider would produce an integrated luminosity of about 10,000 fb-1 (10 ab-1) in a running year (10^7 sec) at the Upsilon(4S) resonance. △ Less

Submitted 4 June, 2006; originally announced June 2006.

Comments: Flavor Physics & CP Violation Conference, Vancouver, 2006

Report number: fpcp06_121

Journal ref: ECONFC060409:004,2006

The International Linear Collider beam dumps

Authors: R. Appleby, L. Keller, T. Markiewicz, A. Seryi, R. Sugahara, D. Walz

Abstract: The ILC beam dumps are a key part of the accelerator design. At Snowmass 2005, the current status of the beam dump designs were reviewed, and the options for the overall dump layout considered. This paper describes the available dump options for the baseline and the alternatives and considers issues for the dumps that require resolution. The ILC beam dumps are a key part of the accelerator design. At Snowmass 2005, the current status of the beam dump designs were reviewed, and the options for the overall dump layout considered. This paper describes the available dump options for the baseline and the alternatives and considers issues for the dumps that require resolution. △ Less

Submitted 15 January, 2006; originally announced January 2006.

Comments: Prepared for 2005 International Linear Collider Physics and Detector Workshop and 2nd ILC Accelerator Workshop, Snowmass, Colorado, 14-27 Aug 2005

Report number: ILCAW0514

Journal ref: ECONFC0508141:ILCAW0514,2005

The 2mrad horizontal crossing angle IR layout for a TeV ILC

Authors: R. Appleby, D. Angal-Kalinin, P. Bambade, B. Mouton, O. Napoly, J. Payet, A. Seryi, Y. Nosochkov

Abstract: The current status of the 2mrad crossing angle layout for the ILC is reviewed. The scheme developed in the UK and France is described and the performance discussed for a TeV machine. Secondly, the scheme developed at SLAC and BNL is then studied and modified for a TeV machine. We find that both schemes can handle the higher energy beam with modifications, and share many common features. The current status of the 2mrad crossing angle layout for the ILC is reviewed. The scheme developed in the UK and France is described and the performance discussed for a TeV machine. Secondly, the scheme developed at SLAC and BNL is then studied and modified for a TeV machine. We find that both schemes can handle the higher energy beam with modifications, and share many common features. △ Less

Submitted 8 July, 2005; originally announced July 2005.

Comments: The proceedings of the 2005 International Linear Collider Workshop, March 2005. 4 pages, 5 figures

Report number: ASTEC-AP-LC-05-01, LAL 05-69

Journal ref: ECONFC050318:1103,2005

A Test Facility for the International Linear Collider at SLAC End Station A, for Prototypes of Beam Delivery and IR Components

Authors: M. Woods, R. Erickson, J. Frisch, C. Hast, R. K. Jobe, L. Keller, T. Markiewicz, T. Maruyama, D. McCormick, J. Nelson, T. Nelson, N. Phinney, T. Raubenheimer, M. Ross, A. Seryi, S. Smith, Z. Szalata, P. Tenenbaum, M. Woodley, D. Angal-Kalinin, C. Beard, C. Densham, J. Greenhalgh, F. Jackson, A. Kalinin , et al. (36 additional authors not shown)

Abstract: The SLAC Linac can deliver damped bunches with ILC parameters for bunch charge and bunch length to End Station A. A 10Hz beam at 28.5 GeV energy can be delivered there, parasitic with PEP-II operation. We plan to use this facility to test prototype components of the Beam Delivery System and Interaction Region. We discuss our plans for this ILC Test Facility and preparations for carrying out expe… ▽ More The SLAC Linac can deliver damped bunches with ILC parameters for bunch charge and bunch length to End Station A. A 10Hz beam at 28.5 GeV energy can be delivered there, parasitic with PEP-II operation. We plan to use this facility to test prototype components of the Beam Delivery System and Interaction Region. We discuss our plans for this ILC Test Facility and preparations for carrying out experiments related to collimator wakefields and energy spectrometers. We also plan an interaction region mockup to investigate effects from backgrounds and beam-induced electromagnetic interference. △ Less

Submitted 24 May, 2005; originally announced May 2005.

Comments: 3 pages, 3 figures, contributed to Particle Accelerator Conference (PAC05), Knoxville, TN, May 16-20, 2005

Report number: SLAC-PUB-11180, EUROTeV-Report-2005-008-1

Journal ref: Conf.Proc.C0505161:2461,2005

Luminosity, Energy and Polarization Studies for the Linear Collider: Comparing e+e- and e-e- for NLC and TESLA

Authors: M. Woods, A. Florimonte, K. C. Moffeit, T. O. Raubenheimer, A. Seryi, C. Sramek

Abstract: We present results from luminosity, energy and polarization studies at a future Linear Collider. We compare e+e- and e-e- modes of operation and consider both NLC and TESLA beam parameter specifications at a center-of-mass energy of 500 GeV. Realistic colliding beam distributions are used, which include dynamic effects of the beam transport from the Dam** Rings to the Interaction Point. Beam-b… ▽ More We present results from luminosity, energy and polarization studies at a future Linear Collider. We compare e+e- and e-e- modes of operation and consider both NLC and TESLA beam parameter specifications at a center-of-mass energy of 500 GeV. Realistic colliding beam distributions are used, which include dynamic effects of the beam transport from the Dam** Rings to the Interaction Point. Beam-beam deflections scans and their impact for beam-based feedbacks are considered. A transverse kink instability is studied, including its impact on determining the luminosity-weighted center-of-mass energy. Polarimetry in the extraction line from the IP is presented, including results on beam distributions at the Compton IP and at the Compton detector. △ Less

Submitted 4 March, 2004; originally announced March 2004.

Comments: 17 pages, 12 figures. Presented at 5th International Workshop on Electron-Electron Interactions at TeV Energies, December 12-14, 2003, Santa Cruz, CA

Report number: SLAC-PUB-10353

Study of Near-Field Vibration Sources for the NLC Linac Components

Authors: F. Asiri, F. Le Pimpec, A. Seryi

Abstract: The vibration stability requirements for the Next Linear Collider (NLC) are far more stringent than for the previous generation of Colliders. To meet these goals, it is imperative that the effects of vibration on NLC Linac components from near-field sources (e.g. compressors, high vacuum equipment, klystrons, modulators, pumps, fans, etc) be well understood. The civil construction method, whethe… ▽ More The vibration stability requirements for the Next Linear Collider (NLC) are far more stringent than for the previous generation of Colliders. To meet these goals, it is imperative that the effects of vibration on NLC Linac components from near-field sources (e.g. compressors, high vacuum equipment, klystrons, modulators, pumps, fans, etc) be well understood. The civil construction method, whether cut-and-cover or parallel bored tunnels, can determine the proximity and possible isolation of noise sources. This paper presents a brief summary and analysis of recently completed and planned studies for characterization of near-field vibration sources under either construction method. The results of in-situ vibration measurements will also be included. △ Less

Submitted 27 May, 2003; originally announced May 2003.

Comments: 3 pages 8 figures Presented at PAC 2003 Portland (Or)

Report number: SLAC-PUB-9815

Journal ref: Conf.Proc.C030512:2748,2003

Effect of Cooling Water on Stability of NLC Linac Components

Authors: F. Le Pimpec, S. Adiga, F. Asiri, G. Bowden, D. Dell'Orco, E. Doyle, B. McKee, A. Seryi, H. Carter, C. Boffo

Abstract: Vertical vibration of linac components (accelerating structures, girders and quadrupoles) in the NLC has been studied experimentally and analytically. Effects such as structural resonances and vibration caused by cooling water both in accelerating structures and quadrupoles have been considered. Experimental data has been compared with analytical predictions and simulations using ANSYS. A design… ▽ More Vertical vibration of linac components (accelerating structures, girders and quadrupoles) in the NLC has been studied experimentally and analytically. Effects such as structural resonances and vibration caused by cooling water both in accelerating structures and quadrupoles have been considered. Experimental data has been compared with analytical predictions and simulations using ANSYS. A design, incorporating the proper decoupling of structure vibrations from the linac quadrupoles, is being pursued. △ Less

Submitted 5 November, 2002; originally announced November 2002.

Comments: 6 Pages 13 Figures Presented at The Nanobeam 2002 Workshop (Lausanne Switzerland)

Report number: SLAC-PUB-9558

Vibrational Stability of NLC Linac and Final Focus Components

Authors: F. Le Pimpec, S. Adiga, F. Asiri, G. Bowden, D. Dell'Orco, E. Doyle, B. McKee, A. Seryi, H. Carter, C. Boffo

Abstract: Vertical vibration of linac components (accelerating structures, girders and quadrupoles) in the NLC has been studied experimentally and analytically. Effects such as structural resonances and vibration caused by cooling water both in accelerating structures and quadrupoles have been considered. Experimental data has been compared with analytical predictions and simulations using ANSYS. A design… ▽ More Vertical vibration of linac components (accelerating structures, girders and quadrupoles) in the NLC has been studied experimentally and analytically. Effects such as structural resonances and vibration caused by cooling water both in accelerating structures and quadrupoles have been considered. Experimental data has been compared with analytical predictions and simulations using ANSYS. A design, incorporating the proper decoupling of structure vibrations from the linac quadrupoles, is being pursued. △ Less

Submitted 2 October, 2002; originally announced October 2002.

Comments: 3 pages, 8 figures presented at the LINAC 2002 conference, Gyeongju Korea

Report number: SLAC-pub-9525

Vibrational Stability of NLC Linac accelerating structure

Authors: F. Le Pimpec, S. Adiga, F. Asiri, G. Bowden, E. Doyle, B. McKee, A. Seryi, S. Redaelli

Abstract: The vibration of components of the NLC linac, such as accelerating structures and girders, is being studied both experimentally and analytically. Various effects are being considered including structural resonances and vibration caused by cooling water in the accelerating structure. This paper reports the status of ongoing work. The vibration of components of the NLC linac, such as accelerating structures and girders, is being studied both experimentally and analytically. Various effects are being considered including structural resonances and vibration caused by cooling water in the accelerating structure. This paper reports the status of ongoing work. △ Less

Submitted 2 October, 2002; originally announced October 2002.

Comments: 3 pages 8 figures Presented at EPAC 2002 Paris France

Report number: SLAC-Pub-9524

Tuning Knobs for the NLC Final Focus

Authors: Y. Nosochkov, P. Raimondi, T. O. Raubenheimer, A. Seryi, M. Woodley

Abstract: Compensation of optics errors at the Interaction Point (IP) is essential for maintaining maximum luminosity at the NLC. Several correction systems (knobs) using the Final Focus sextupoles have been designed to provide orthogonal compensation of linear and the second order optics aberrations at IP. Tuning effects of these knobs on the 250 GeV beam were verified using tracking simulations. Compensation of optics errors at the Interaction Point (IP) is essential for maintaining maximum luminosity at the NLC. Several correction systems (knobs) using the Final Focus sextupoles have been designed to provide orthogonal compensation of linear and the second order optics aberrations at IP. Tuning effects of these knobs on the 250 GeV beam were verified using tracking simulations. △ Less

Submitted 18 June, 2002; originally announced June 2002.

Comments: 4 pages, 3 figures

Report number: SLAC-PUB-9255

NLC Luminosity as a Function of Beam Parameters

Authors: Y. Nosochkov, P. Raimondi, T. O. Raubenheimer, A. Seryi

Abstract: Realistic calculation of NLC luminosity has been performed using particle tracking in DIMAD and beam-beam simulations in GUINEA-PIG code for various values of beam emittance, energy and beta functions at the Interaction Point (IP). Results of the simulations are compared with analytic luminosity calculations. The optimum range of IP beta functions for high luminosity was identified. Realistic calculation of NLC luminosity has been performed using particle tracking in DIMAD and beam-beam simulations in GUINEA-PIG code for various values of beam emittance, energy and beta functions at the Interaction Point (IP). Results of the simulations are compared with analytic luminosity calculations. The optimum range of IP beta functions for high luminosity was identified. △ Less

Submitted 14 June, 2002; originally announced June 2002.

Comments: 4 pages, 7 figures

Report number: SLAC-PUB-9254

Active Vibration Suppression R&D for the NLC

Authors: Josef Frisch, Linda Hendirckson, Thomas Himel, Andrei Seryi

Abstract: The nanometer scale beam sizes at the interaction point in linear colliders limit the allowable motion of the final focus magnets. We have constructed a prototype system to investigate the use of active vibration dam** to control magnet motion. Inertial sensors are used to measure the position of a test mass, and a DSP based system provides feedback using electrostatic pushers. Simulation and… ▽ More The nanometer scale beam sizes at the interaction point in linear colliders limit the allowable motion of the final focus magnets. We have constructed a prototype system to investigate the use of active vibration dam** to control magnet motion. Inertial sensors are used to measure the position of a test mass, and a DSP based system provides feedback using electrostatic pushers. Simulation and experimental results for the control of a mechanically simple system are presented. △ Less

Submitted 14 December, 2001; originally announced December 2001.

Comments: Talk at ICALEPCS2001, WECT0005 3 pages. pdf

Journal ref: eConf C011127:WECT005,2001

TESLA Technical Design Report, Part VI, Chapter 1: The Photon Collider at TESLA

Authors: B. Badelek, C. Blochinger, J. Blumlein, E. Boos, R. Brinkmann, H. Burkhardt, P. Bussey, C. Carimalo, J. Chyla, A. K. Ciftci, W. Decking, A. De Roeck, V. Fadin, M. Ferrario, A. Finch, H. Fraas, F. Franke, M. Galynskii, A. Gamp, I. Ginzburg, R. Godbole, D. S. Gorbunov, G. Gounaris, K. Hagiwara, L. Han , et al. (74 additional authors not shown)

Abstract: TESLA Technical Design Report, Part VI, Chapter 1: The Photon Collider at TESLA TESLA Technical Design Report, Part VI, Chapter 1: The Photon Collider at TESLA △ Less

Submitted 6 August, 2001; originally announced August 2001.

Comments: 102 pages, 41 figures, editor: V. Telnov

Report number: DESY 2001-011, ECFA 2001-209

Journal ref: Int.J.Mod.Phys.A19:5097-5186,2004

A Shaky Road to Subnanometer Beams. NLC Ground Motion, Vibration and Stabilization Studies

Authors: Andrei Seryi

Abstract: Ground motion and vibration can be a limiting factor in the performance of future linear colliders. Investigations of ground motion have been carried out around the world for several decades. In this review, results of recent investigations of ground motion as well as ongoing developments of stabilization methods are presented. Ground motion and vibration can be a limiting factor in the performance of future linear colliders. Investigations of ground motion have been carried out around the world for several decades. In this review, results of recent investigations of ground motion as well as ongoing developments of stabilization methods are presented. △ Less

Submitted 4 May, 2001; originally announced May 2001.

Comments: Invited talk given at the 18th International Conference On High Energy Accelerators (HEACC 2001) 26-30 Mar 2001, Tsukuba, Japan

Report number: SLAC-PUB-8825

Beam-based Feedback Simulations for the NLC Linac

Authors: L. Hendrickson, N. Phinney, P. Raimondi, T. Raubenheimer, A. Seryi, P. Tenenbaum

Abstract: Extensive beam-based feedback systems are planned as an integral part of the Next Linear Collider (NLC) control system. Wakefield effects are a significant influence on the feedback design, imposing both architectural and algorithmic constraints. Studies are in progress to assure the optimal selection of devices and to refine and confirm the algorithms for the system design. We show the results… ▽ More Extensive beam-based feedback systems are planned as an integral part of the Next Linear Collider (NLC) control system. Wakefield effects are a significant influence on the feedback design, imposing both architectural and algorithmic constraints. Studies are in progress to assure the optimal selection of devices and to refine and confirm the algorithms for the system design. We show the results of initial simulations, along with evaluations of system response for various conditions of ground motion and other operational disturbances. △ Less

Submitted 1 September, 2000; originally announced September 2000.

Comments: 3 pages. Linac2000 conference

Report number: moa15

Journal ref: eConfC000821:MOA15,2000

Investigations of Slow Motions of the SLAC Linac Tunnel

Authors: Andrei Seryi

Abstract: Investigations of slow transverse motion of the linac tunnel of the Stanford Linear Collider have been performed over period of about one month in December 1999 -- January 2000. The linac laser alignment system, equipped with a quadrant photodetector, allowed submicron resolution measurement of the motion of the middle of the linac tunnel with respect to its ends. Measurements revealed two major… ▽ More Investigations of slow transverse motion of the linac tunnel of the Stanford Linear Collider have been performed over period of about one month in December 1999 -- January 2000. The linac laser alignment system, equipped with a quadrant photodetector, allowed submicron resolution measurement of the motion of the middle of the linac tunnel with respect to its ends. Measurements revealed two major sources responsible for the observed relative motion. Variation of the external atmospheric pressure was found to be the most significant cause of short wavelength transverse motion of the tunnel. The long wavelength component of the motion has been also observed to have a large contribution from tidal effects. The measured data are essential for determination of parameters for the Next Linear Collider. △ Less

Submitted 19 August, 2000; originally announced August 2000.

Comments: Submitted to XX International Linac Conference

Report number: moa11

Journal ref: eConf C000821 (2000) MOA11

Simulation Studies of the NLC with Improved Ground Motion Models

Authors: A. Seryi, L. Hendrickson, P. Raimondi, T. Raubenheimer, P. Tenenbaum

Abstract: The performance of various systems of the Next Linear Collider (NLC) have been studied in terms of ground motion using recently developed models. In particular, the performance of the beam delivery system is discussed. Plans to evaluate the operation of the main linac beam-based alignment and feedback systems are also outlined. The performance of various systems of the Next Linear Collider (NLC) have been studied in terms of ground motion using recently developed models. In particular, the performance of the beam delivery system is discussed. Plans to evaluate the operation of the main linac beam-based alignment and feedback systems are also outlined. △ Less

Submitted 19 August, 2000; originally announced August 2000.

Comments: Submitted to XX International Linac Conference

Report number: moa14

Journal ref: eConfC000821:MOA14,2000