-
The Enhanced Resolution Imager and Spectrograph for the VLT
Authors:
R. Davies,
O. Absil,
G. Agapito,
A. Agudo Berbel,
A. Baruffolo,
V. Biliotti,
M. Bonaglia,
M. Bonse,
R. Briguglio,
P. Campana,
Y. Cao,
L. Carbonaro,
A. Cortes,
G. Cresci,
Y. Dallilar,
F. Dannert,
R. J. De Rosa,
M. Deysenroth,
I. Di Antonio,
A. Di Cianno,
G. Di Rico,
D. Doelman,
M. Dolci,
R. Dorn,
F. Eisenhauer
, et al. (59 additional authors not shown)
Abstract:
ERIS, the Enhanced Resolution Imager and Spectrograph, is an instrument that both extends and enhances the fundamental diffraction limited imaging and spectroscopy capability for the VLT. It replaces two instruments that were being maintained beyond their operational lifetimes, combines their functionality on a single focus, provides a new wavefront sensing module for natural and laser guide stars…
▽ More
ERIS, the Enhanced Resolution Imager and Spectrograph, is an instrument that both extends and enhances the fundamental diffraction limited imaging and spectroscopy capability for the VLT. It replaces two instruments that were being maintained beyond their operational lifetimes, combines their functionality on a single focus, provides a new wavefront sensing module for natural and laser guide stars that makes use of the Adaptive Optics Facility, and considerably improves on their performance. The observational modes ERIS provides are integral field spectroscopy at 1-2.5 μm, imaging at 1-5 μm with several options for high contrast imaging, and longslit spectroscopy at 3-4 μm, The instrument is installed at the Cassegrain focus of UT4 at the VLT and, following its commissioning during 2022, has been made available to the community.
△ Less
Submitted 26 April, 2023; v1 submitted 5 April, 2023;
originally announced April 2023.
-
The ESO's Extremely Large Telescope Working Groups
Authors:
Paolo Padovani,
Michele Cirasuolo,
Remco van der Burg,
Faustine Cantalloube,
Elizabeth George,
Markus Kasper,
Kieran Leschinski,
Carlos Martins,
Julien Milli,
Sabine Möhler,
Mark Neeser,
Benoit Neichel,
Angel Otarola,
Rubén Sánchez-Janssen,
Benoit Serra,
Alain Smette,
Elena Valenti,
Christophe Verinaud,
Joël Vernet,
Olivier Absil,
Guido Agapito,
Morten Andersen,
Carmelo Arcidiacono,
Matej Arko,
Pierre Baudoz
, et al. (60 additional authors not shown)
Abstract:
Since 2005 ESO has been working with its community and industry to develop an extremely large optical/infrared telescope. ESO's Extremely Large Telescope, or ELT for short, is a revolutionary ground-based telescope that will have a 39-metre main mirror and will be the largest visible and infrared light telescope in the world. To address specific topics that are needed for the science operations an…
▽ More
Since 2005 ESO has been working with its community and industry to develop an extremely large optical/infrared telescope. ESO's Extremely Large Telescope, or ELT for short, is a revolutionary ground-based telescope that will have a 39-metre main mirror and will be the largest visible and infrared light telescope in the world. To address specific topics that are needed for the science operations and calibrations of the telescope, thirteen specific working groups were created to coordinate the effort between ESO, the instrument consortia, and the wider community. We describe here the goals of these working groups as well as their achievements so far.
△ Less
Submitted 28 February, 2023;
originally announced February 2023.
-
Performance advantages of buffered mode operation of HxRG near infrared detectors
Authors:
Naidu Bezawada,
Derek Ives,
Domingo Alvarez,
Benoît Serra,
Elizabeth George,
Christopher Mandla,
Leander Mehrgan
Abstract:
The Teledyne HxRG detectors have versatile and programmable output options to allow operation of them in a variety of configurations such as slow unbuffered, slow buffered, fast buffered or unbuffered modes to optimise the detector performance for a given application. Normally at ESO, for low noise operation, the detectors are operated in slow unbuffered mode. Whilst the slow unbuffered mode offer…
▽ More
The Teledyne HxRG detectors have versatile and programmable output options to allow operation of them in a variety of configurations such as slow unbuffered, slow buffered, fast buffered or unbuffered modes to optimise the detector performance for a given application. Normally at ESO, for low noise operation, the detectors are operated in slow unbuffered mode. Whilst the slow unbuffered mode offers a simple interface to the external preamplifier electronics, the detector operation in this mode can suffer from reduced pixel frequency response and higher electrical crosstalk between the readout channels. In the context of the detector systems required for the first generation instruments of the ELT (MICADO, HARMONI and METIS), an exercise was undertaken to evaluate the noise, speed and crosstalk performance of the detectors in the slow buffered mode. A test preamplifier has been designed with options to operate a H2RG detector in buffered or unbuffered and with or without using the reference output, so a direct performance comparison can be made between different modes. This paper presents the performance advantages such as increased pixel frequency response, elimination of electrical crosstalk between the readout channels and the noise performance in the buffered mode operation. These improvements allow us to achieve the same frame readout time using half the detector cryogenic electronics and detector controller electronics for the ELT instruments, which significantly reduces the associated cryomechanical complexities in the instrument.
△ Less
Submitted 15 December, 2020;
originally announced December 2020.
-
Characterisation, performance, and operational aspects of the H4RG-15 near infrared detectors for the MOONS instrument
Authors:
Derek Ives,
Domingo Alvarez,
Naidu Bezawada,
Elizabeth George,
Benoît Serra
Abstract:
MOONS is a multi-object spectrograph for the ESO VLT covering a simultaneous wavelength range of 0.6-1.8 microns using approximately 1000 fibres. It uses four Teledyne Imaging Systems H4RG-15 4K x 4K detectors with 2.5 $μ$m cut-off material for the two longer wavebands (YJ and H). Since the spectrographs utilize an extremely fast modified Schmidt camera design, then the detectors are situated in t…
▽ More
MOONS is a multi-object spectrograph for the ESO VLT covering a simultaneous wavelength range of 0.6-1.8 microns using approximately 1000 fibres. It uses four Teledyne Imaging Systems H4RG-15 4K x 4K detectors with 2.5 $μ$m cut-off material for the two longer wavebands (YJ and H). Since the spectrographs utilize an extremely fast modified Schmidt camera design, then the detectors are situated in the optical beam and hence required the development of a novel 64- channel cryogenic differential cryogenic preamplifier, minimized for optical footprint which will be reported on. We have operated the Engineering Grade H4RG detector at a range of temperatures from 90K to 40K and we will report on the advantages of the lower operational temperature. We have completed a full persistence analysis and are able to model it reasonably well and will offer a correction for it in our data pipeline. We have also configured the detector for use with both unbuffered and buffered outputs and report on the differences in performance between the two output types. We have also seen some programming issues with the detector type and will report on our work-around for this, we will also describe the use of the column-deselect feature and row skip** to minimize the effects of PEDs. We have also measured charge injection per read and report on this, likewise we have also measured the inter-pixel capacitance in different regions of the detector. We will present all these results together with a summary of the complete performance characteristics of this detector family.
△ Less
Submitted 15 December, 2020;
originally announced December 2020.
-
Detector Systems Engineering for Extremely Large Instruments
Authors:
Elizabeth M. George,
Naidu Bezawada,
Derek Ives,
Leander Mehrgan,
Matteo Accardo,
Domingo Alvarez,
Martin Brinkmann,
Ralf Conzelmann,
Claudio Cumani,
Mark Downing,
Max Engelhardt,
Marcus Haug,
Joshua Hopgood,
Christoph Geimer,
Olaf Iwert,
Barbara Klein,
Christopher Mandla,
Eric Müller,
Suzanne Ramsay,
Javier Reyes,
Mathias Richerzhagen,
Benoît Serra,
Matthias Seidel,
Jörg Stegmeier,
Mirko Todorovic
Abstract:
The scientific detector systems for the ESO ELT first-light instruments, HARMONI, MICADO, and METIS, together will require 27 science detectors: seventeen 2.5 $μ$m cutoff H4RG-15 detectors, four 4K x 4K 231-84 CCDs, five 5.3 $μ$m cutoff H2RG detectors, and one 13.5 $μ$m cutoff GEOSNAP detector. This challenging program of scientific detector system development covers everything from designing and…
▽ More
The scientific detector systems for the ESO ELT first-light instruments, HARMONI, MICADO, and METIS, together will require 27 science detectors: seventeen 2.5 $μ$m cutoff H4RG-15 detectors, four 4K x 4K 231-84 CCDs, five 5.3 $μ$m cutoff H2RG detectors, and one 13.5 $μ$m cutoff GEOSNAP detector. This challenging program of scientific detector system development covers everything from designing and producing state-of-the-art detector control and readout electronics, to develo** new detector characterization techniques in the lab, to performance modeling and final system verification. We report briefly on the current design of these detector systems and developments underway to meet the challenging scientific performance goals of the ELT instruments.
△ Less
Submitted 15 December, 2020;
originally announced December 2020.
-
Pyxel: the collaborative detection simulation framework
Authors:
Thibaut Prod'homme,
Frédéric Lemmel,
Matej Arko,
Benoît Serra,
Elizabeth M. George,
Enrico Biancalani,
Hans Smit,
David Lucsanyi
Abstract:
Pyxel is a novel python tool for end-to-end detection chain simulation i.e. from detector optical effects to readout electronics effects. It is an easy-to-use framework to host and pipeline any detector effect model. It is suited for simulating both Charge-Coupled Devices, CMOS Image Sensors and Mercury Cadmium Telluride hybridized arrays. It is conceived as a collaborative tool to promote reusabi…
▽ More
Pyxel is a novel python tool for end-to-end detection chain simulation i.e. from detector optical effects to readout electronics effects. It is an easy-to-use framework to host and pipeline any detector effect model. It is suited for simulating both Charge-Coupled Devices, CMOS Image Sensors and Mercury Cadmium Telluride hybridized arrays. It is conceived as a collaborative tool to promote reusability, knowledge transfer, and reliability in the instrumentation community. We provide a demonstration of Pyxel's basic principles, describe newly added capabilities, and give examples of more advanced applications.
△ Less
Submitted 9 December, 2020;
originally announced December 2020.
