Showing 1–44 of 44 results for author: Semperlotti, F

Time transient Simulations via Finite Element Network Analysis: Theoretical Formulation and Numerical Validation

Authors: Mehdi Jokar, Siddharth Nair, Fabio Semperlotti

Abstract: This paper extends the finite element network analysis (FENA) to include a dynamic time-transient formulation. FENA was initially formulated in the context of the linear static analysis of 1D and 2D elastic structures. By introducing the concept of super finite network element, this paper provides the necessary foundation to extend FENA to linear time-transient simulations for both homogeneous and… ▽ More This paper extends the finite element network analysis (FENA) to include a dynamic time-transient formulation. FENA was initially formulated in the context of the linear static analysis of 1D and 2D elastic structures. By introducing the concept of super finite network element, this paper provides the necessary foundation to extend FENA to linear time-transient simulations for both homogeneous and inhomogeneous domains. The concept of neural network concatenation, originally formulated to combine networks representative of different structural components in space, is extended to the time domain. Network concatenation in time enables training neural network models based on data available in a limited time frame and then using the trained networks to simulate the system evolution beyond the initial time window characteristic of the training data set. The proposed methodology is validated by applying FENA to the transient simulation of one-dimensional structural elements (such as rods and beams) and by comparing the results with either analytical or finite element solutions. Results confirm that FENA accurately predicts the dynamic response of the physical system and, while introducing an error on the order of 1% (compared to analytical or computational solutions of the governing differential equations), it is capable of delivering extreme computational efficiency. △ Less

Submitted 11 April, 2024; originally announced July 2024.

Physics and geometry informed neural operator network with application to acoustic scattering

Authors: Siddharth Nair, Timothy F. Walsh, Greg Pickrell, Fabio Semperlotti

Abstract: In this paper, we introduce a physics and geometry informed neural operator network with application to the forward simulation of acoustic scattering. The development of geometry informed deep learning models capable of learning a solution operator for different computational domains is a problem of general importance for a variety of engineering applications. To this end, we propose a physics-inf… ▽ More In this paper, we introduce a physics and geometry informed neural operator network with application to the forward simulation of acoustic scattering. The development of geometry informed deep learning models capable of learning a solution operator for different computational domains is a problem of general importance for a variety of engineering applications. To this end, we propose a physics-informed deep operator network (DeepONet) capable of predicting the scattered pressure field for arbitrarily shaped scatterers using a geometric parameterization approach based on non-uniform rational B-splines (NURBS). This approach also results in parsimonious representations of non-trivial scatterer geometries. In contrast to existing physics-based approaches that require model re-evaluation when changing the computational domains, our trained model is capable of learning solution operator that can approximate physically-consistent scattered pressure field in just a few seconds for arbitrary rigid scatterer shapes; it follows that the computational time for forward simulations can improve (i.e. be reduced) by orders of magnitude in comparison to the traditional forward solvers. In addition, this approach can evaluate the scattered pressure field without the need for labeled training data. After presenting the theoretical approach, a comprehensive numerical study is also provided to illustrate the remarkable ability of this approach to simulate the acoustic pressure fields resulting from arbitrary combinations of arbitrary scatterer geometries. These results highlight the unique generalization capability of the proposed operator learning approach. △ Less

Submitted 1 June, 2024; originally announced June 2024.

Comments: 20 pages of main text, 9 figures

On the geometric phase and its role in the design of elastic topological materials

Authors: Mohit Kumar, Fabio Semperlotti

Abstract: The geometric phase provides important mathematical insights to understand the occurrence and evolution of the dynamic response in a diverse spectrum of systems ranging from quantum to classical mechanics. While the concept of geometric phase, which is an additional phase factor occurring in dynamical systems, holds the same meaning across different fields of application, its use and interpretatio… ▽ More The geometric phase provides important mathematical insights to understand the occurrence and evolution of the dynamic response in a diverse spectrum of systems ranging from quantum to classical mechanics. While the concept of geometric phase, which is an additional phase factor occurring in dynamical systems, holds the same meaning across different fields of application, its use and interpretation can acquire important nuances specific to the system of interest. In recent years, the development of the concept of quantum topological materials and its extension to classical mechanical systems have renewed the interest in the study of the geometric phase. This study reviews the concept of geometric phase and discusses, by means of either established or original results, its role in the design of elastic materials. Concepts of differential geometry and topology are put forward to provide a theoretical understanding of the geometric phase and its connection to the physical properties of the system. Then, the concept of geometric phase is applied to different types of elastic waveguides to explain how either topologically trivial or non-trivial behavior can emerge based on a proper geometric design of the waveguide. △ Less

Submitted 13 March, 2024; originally announced March 2024.

Multiple scattering simulation via physics-informed neural networks

Authors: Siddharth Nair, Timothy F. Walsh, Greg Pickrell, Fabio Semperlotti

Abstract: This work presents a physics-driven machine learning framework for the simulation of acoustic scattering problems. The proposed framework relies on a physics-informed neural network (PINN) architecture that leverages prior knowledge based on the physics of the scattering problem as well as a tailored network structure that embodies the concept of the superposition principle of linear wave interact… ▽ More This work presents a physics-driven machine learning framework for the simulation of acoustic scattering problems. The proposed framework relies on a physics-informed neural network (PINN) architecture that leverages prior knowledge based on the physics of the scattering problem as well as a tailored network structure that embodies the concept of the superposition principle of linear wave interaction. The framework can also simulate the scattered field due to rigid scatterers having arbitrary shape as well as high-frequency problems. Unlike conventional data-driven neural networks, the PINN is trained by directly enforcing the governing equations describing the underlying physics, hence without relying on any labeled training dataset. Remarkably, the network model has significantly lower discretization dependence and offers simulation capabilities akin to parallel computation. This feature is particularly beneficial to address computational challenges typically associated with conventional mesh-dependent simulation methods. The performance of the network is investigated via a comprehensive numerical study that explores different application scenarios based on acoustic scattering. △ Less

Submitted 6 March, 2024; originally announced March 2024.

Comments: 23 pages of main text, 9 figures

GRIDS-Net: Inverse shape design and identification of scatterers via geometric regularization and physics-embedded deep learning

Authors: Siddharth Nair, Timothy F. Walsh, Greg Pickrell, Fabio Semperlotti

Abstract: This study presents a deep learning based methodology for both remote sensing and design of acoustic scatterers. The ability to determine the shape of a scatterer, either in the context of material design or sensing, plays a critical role in many practical engineering problems. This class of inverse problems is extremely challenging due to their high-dimensional, nonlinear, and ill-posed nature. T… ▽ More This study presents a deep learning based methodology for both remote sensing and design of acoustic scatterers. The ability to determine the shape of a scatterer, either in the context of material design or sensing, plays a critical role in many practical engineering problems. This class of inverse problems is extremely challenging due to their high-dimensional, nonlinear, and ill-posed nature. To overcome these technical hurdles, we introduce a geometric regularization approach for deep neural networks (DNN) based on non-uniform rational B-splines (NURBS) and capable of predicting complex 2D scatterer geometries in a parsimonious dimensional representation. Then, this geometric regularization is combined with physics-embedded learning and integrated within a robust convolutional autoencoder (CAE) architecture to accurately predict the shape of 2D scatterers in the context of identification and inverse design problems. An extensive numerical study is presented in order to showcase the remarkable ability of this approach to handle complex scatterer geometries while generating physically-consistent acoustic fields. The study also assesses and contrasts the role played by the (weakly) embedded physics in the convergence of the DNN predictions to a physically consistent inverse design. △ Less

Submitted 26 February, 2023; v1 submitted 15 February, 2023; originally announced February 2023.

Comments: 23 pages of main text, 10 figures

Journal ref: Comput. Methods Appl. Mech. Engrg. 414(2023)116167

Classical analogue to the Kitaev model and Majorana-like topological bound states

Authors: Ting-Wei Liu, Fabio Semperlotti

Abstract: This study explores the possibility and presents a methodology to synthesize a classical mechanical analogue to the quantum mechanical 1D Kitaev model. While being fundamentally different, we will identify significant conceptual similarities between the two models that culminate in the occurrence, in the classical analogue system, of topologically non-trivial bound states that are akin to Majorana… ▽ More This study explores the possibility and presents a methodology to synthesize a classical mechanical analogue to the quantum mechanical 1D Kitaev model. While being fundamentally different, we will identify significant conceptual similarities between the two models that culminate in the occurrence, in the classical analogue system, of topologically non-trivial bound states that are akin to Majorana zero modes. By reformulating the Hamiltonian of the classical system in a form reminiscent of second quantization, we show that a 1D staggered classical mechanical chain can exhibit dynamic characteristics analogous to the Kitaev's 1D superconducting model, as well as its characteristic bound states. The non-trivial topological nature of the bound states is further confirmed by the topological band structure analysis and by the topological invariant. While the non-Abelian nature of these states remains an open question, these results allow envisioning the possibility to achieve topological braiding in classical mechanical systems. △ Less

Submitted 17 May, 2023; v1 submitted 22 November, 2022; originally announced November 2022.

Multiscale multimesh finite element method | $\text{M}^2$-FEM: Hierarchical mesh-decoupling for integral structural theories

Authors: Wei Ding, Sansit Patnaik, Fabio Semperlotti

Abstract: This study presents a generalized multiscale multimesh finite element method ($\text{M}^2$-FEM) that addresses several long-standing challenges in the numerical simulation of integral structural theories, often used to model multiscale and nonlocal effects. The major challenges in the numerical simulation of integral boundary value problems are primarily rooted in the coupling of the spatial discr… ▽ More This study presents a generalized multiscale multimesh finite element method ($\text{M}^2$-FEM) that addresses several long-standing challenges in the numerical simulation of integral structural theories, often used to model multiscale and nonlocal effects. The major challenges in the numerical simulation of integral boundary value problems are primarily rooted in the coupling of the spatial discretization of the global (parent) and integral (child) domains which severely restricts the computational efficiency of existing algorithms by imposing an implicit trade-off in the accuracy achieved by the child domain and in the resources dedicated to the simulation of the overall parent domain. One of the most defining contributions of this study consists in the development of a mesh-decoupling technique that generates isolated sets of meshes such that the parent and child domains can be discretized and approximated independently. This mesh-decoupling has a multi-fold impact on the simulation of integral theories such that, when compared to existing state-of-the-art techniques, the proposed algorithm achieves simultaneously better numerical accuracy and efficiency (hence allowing a greater flexibility in both mesh size and computational cost trade-off decisions), greater ability to adopt generalized integral kernel functions, and the ability to handle non-regular (non-rectangular) domains via unstructured meshing. In this study, we choose a benchmark problem based on an extended version of the Eringen's nonlocal elasticity theory (implicitly, a multiscale theory) that leverages the use of generalized attenuation kernels and non-constant horizons of nonlocality. Nonetheless, the proposed $\text{M}^2$-FEM algorithm is very general and it can be applied to a variety of integral theories, even beyond structural elasticity. △ Less

Submitted 26 October, 2022; originally announced October 2022.

Multiscale nonlocal beam theory: An application of distributed-order fractional operators

Authors: Wei Ding, Sansit Patnaik, Fabio Semperlotti

Abstract: This study presents a comprehensive theoretical framework to simulate the response of multiscale nonlocal elastic beams. By employing distributed-order (DO) fractional operators with a fourth-order tensor as the strength-function, the framework can accurately capture anisotropic behavior of 2D heterogeneous beams with nonlocal effects localized across multiple scales. Building upon this general co… ▽ More This study presents a comprehensive theoretical framework to simulate the response of multiscale nonlocal elastic beams. By employing distributed-order (DO) fractional operators with a fourth-order tensor as the strength-function, the framework can accurately capture anisotropic behavior of 2D heterogeneous beams with nonlocal effects localized across multiple scales. Building upon this general continuum theory and on the multiscale character of DO operators, a one-dimensional (1D) multiscale nonlocal Timoshenko model is also presented. This approach enables a significant model-order reduction without compromising the heterogeneous nonlocal description of the material, hence leading to an efficient and accurate multiscale nonlocal modeling approach. Both 1D and 2D approaches are applied to simulate the mechanical responses of nonlocal beams. The direct comparison of numerical simulations produced by either the DO or an integer-order fully-resolved model (used as ground truth) clearly illustrates the ability of the DO formulation to capture the effect of the microstructure on the macroscopic response. The assessment of the computational cost also indicates the superior efficiency of the proposed approach. △ Less

Submitted 6 July, 2022; originally announced July 2022.

Comments: This document has 27 pages and 9 figures

On the instabilities of intrinsic thermoacoustic modes in a thermoacoustic waveguide with anechoic terminations

Authors: Haitian Hao, Fabio Semperlotti

Abstract: A recent study [H. Hao and F. Semperlotti, Phys. Rev. B 104, 104303 (2021)] investigated the dynamic behavior of an infinite one-dimensional (1D) thermoacoustic waveguide (TAWG) and illustrated its ability to sustain nonreciprocal and near zero-index sound propagation behavior; these properties can be very beneficial in the design of acoustic devices, including acoustic diodes, amplifiers, and clo… ▽ More A recent study [H. Hao and F. Semperlotti, Phys. Rev. B 104, 104303 (2021)] investigated the dynamic behavior of an infinite one-dimensional (1D) thermoacoustic waveguide (TAWG) and illustrated its ability to sustain nonreciprocal and near zero-index sound propagation behavior; these properties can be very beneficial in the design of acoustic devices, including acoustic diodes, amplifiers, and cloaks. Nevertheless, it is critical to realize that when this concept is implemented in a finite-length waveguide, dynamic instabilities may occur and either drastically reduce or completely hinder the ability of the TAWG to control and manipulate sound. In this work, we uncover and investigate the occurrence of either evanescent or intrinsic thermoacoustic (ITA) modes in a 1D TAWG with anechoic terminations. The stability analysis clearly distinguishes these two types of evanescent modes and highlights their different origin rooted in either acoustic or thermoviscous effects. Numerical results reveal that ITA modes in anechoic-terminated TAWG are strictly connected to the acoustic-driven evanescent modes, and evolve towards unstable modes as the TA coupling strength is increased. This study may have important implications for the practical design of novel acoustic manipulating devices enabled by TA coupling elements. The conclusions drawn in this study may also shed lights on the effective suppression of instabilities in TAWGs. △ Less

Submitted 4 May, 2022; originally announced May 2022.

Comments: 15 pages, 8 figures

On the role of the microstructure in the deformation of porous solids

Authors: Sansit Patnaik, Mehdi Jokar, Wei Ding, Fabio Semperlotti

Abstract: This study explores the role that the microstructure plays in determining the macroscopic static response of porous elastic continua and exposes the occurrence of position-dependent nonlocal effects that are strictly correlated to the configuration of the microstructure. Then, a nonlocal continuum theory based on variable-order fractional calculus is developed in order to accurately capture the co… ▽ More This study explores the role that the microstructure plays in determining the macroscopic static response of porous elastic continua and exposes the occurrence of position-dependent nonlocal effects that are strictly correlated to the configuration of the microstructure. Then, a nonlocal continuum theory based on variable-order fractional calculus is developed in order to accurately capture the complex spatially distributed nonlocal response. The remarkable potential of the fractional approach is illustrated by simulating the nonlinear thermoelastic response of porous beams. The performance, evaluated both in terms of accuracy and computational efficiency, is directly contrasted with high-fidelity finite element models that fully resolve the pores' geometry. Results indicate that the reduced-order representation of the porous microstructure, captured by the synthetic variable-order parameter, offers a robust and accurate representation of the multiscale material architecture that largely outperforms classical approaches based on the concept of average porosity. △ Less

Submitted 28 September, 2022; v1 submitted 4 February, 2022; originally announced February 2022.

Comments: 11 pages and 5 figures

Journal ref: npj Comput Mater 8, 152 (2022)

Fractional-Order Shell Theory: Formulation and Application to the Analysis of Nonlocal Cylindrical Panels

Authors: Sai Sidhardh, Sansit Patnaik, Fabio Semperlotti

Abstract: We present a theoretical and computational framework based on fractional calculus for the analysis of the nonlocal static response of cylindrical shell panels. The differ-integral nature of fractional derivatives allows an efficient and accurate methodology to account for the effect of long-range (nonlocal) interactions in curved structures. More specifically, the use of frame-invariant fractional… ▽ More We present a theoretical and computational framework based on fractional calculus for the analysis of the nonlocal static response of cylindrical shell panels. The differ-integral nature of fractional derivatives allows an efficient and accurate methodology to account for the effect of long-range (nonlocal) interactions in curved structures. More specifically, the use of frame-invariant fractional-order kinematic relations enables a physically, mathematically, and thermodynamically consistent formulation to model the nonlocal elastic interactions. In order to evaluate the response of these nonlocal shells under practical scenarios involving generalized loads and boundary conditions, the fractional-Finite Element Method (f-FEM) is extended to incorporate shell elements based on the first-order shear-deformable displacement theory. Finally, numerical studies are performed exploring both the linear and the geometrically nonlinear static response of nonlocal cylindrical shell panels. This study is intended to provide a general foundation to investigate the nonlocal behavior of curved structures by means of fractional order models. △ Less

Submitted 1 February, 2022; originally announced February 2022.

Multiscale Nonlocal Elasticity: A Distributed Order Fractional Formulation

Authors: Wei Ding, Sansit Patnaik, Fabio Semperlotti

Abstract: This study presents a generalized multiscale nonlocal elasticity theory that leverages distributed order fractional calculus to accurately capture coexisting multiscale and nonlocal effects within a macroscopic continuum. The nonlocal multiscale behavior is captured via distributed order fractional constitutive relations derived from a nonlocal thermodynamic formulation. The governing equations of… ▽ More This study presents a generalized multiscale nonlocal elasticity theory that leverages distributed order fractional calculus to accurately capture coexisting multiscale and nonlocal effects within a macroscopic continuum. The nonlocal multiscale behavior is captured via distributed order fractional constitutive relations derived from a nonlocal thermodynamic formulation. The governing equations of the inhomogeneous continuum are obtained via the Hamilton principle. As a generalization of the constant order fractional continuum theory, the distributed order theory can model complex media characterized by inhomogeneous nonlocality and multiscale effects. In order to understand the correspondence between microscopic effects and the properties of the continuum, an equivalent mass-spring lattice model is also developed by direct discretization of the distributed order elastic continuum. Detailed theoretical arguments are provided to show the equivalence between the discrete and the continuum distributed order models in terms of internal nonlocal forces, potential energy distribution, and boundary conditions. These theoretical arguments facilitate the physical interpretation of the role played by the distributed order framework within nonlocal elasticity theories. They also highlight the outstanding potential and opportunities offered by this methodology to account for multiscale nonlocal effects. The capabilities of the methodology are also illustrated via a numerical study that highlights the excellent agreement between the displacement profiles and the total potential energy predicted by the two models under various order distributions. Remarkably, multiscale effects such as displacement distortion, material softening, and energy concentration are well captured at continuum level by the distributed order theory. △ Less

Submitted 24 December, 2021; originally announced January 2022.

Comments: 31 pages, 9 images, 3 Tables

Displacement-Driven Approach to Nonlocal Elasticity

Authors: Sansit Patnaik, Sai Sidhardh, Fabio Semperlotti

Abstract: This study presents a physically consistent displacement-driven reformulation of the concept of action-at-a-distance, which is at the foundation of nonlocal elasticity. In contrast to existing approaches that adopts an integral stress-strain constitutive relation, the displacement-driven approach is predicated on an integral strain-displacement relation. The most remarkable consequence of this ref… ▽ More This study presents a physically consistent displacement-driven reformulation of the concept of action-at-a-distance, which is at the foundation of nonlocal elasticity. In contrast to existing approaches that adopts an integral stress-strain constitutive relation, the displacement-driven approach is predicated on an integral strain-displacement relation. The most remarkable consequence of this reformulation is that the (total) strain energy is guaranteed to be convex and positive-definite without imposing any constraint on the symmetry of the kernels. This feature is critical to enable the application of nonlocal formulations to general continua exhibiting asymmetric interactions; ultimately a manifestation of material heterogeneity. Remarkably, the proposed approach also enables a strong satisfaction of the locality recovery condition and of the laws of thermodynamics, which are not foregone conclusions in most classical nonlocal elasticity theories. Additionally, the formulation is frame-invariant and the nonlocal operator remains physically consistent at boundaries. The study is complemented by a detailed analysis of the dynamic response of the nonlocal continuum and of its intrinsic dispersion leading to the consideration that the choice of nonlocal kernels should depend on the specific material. Examples of exponential or power-law kernels are presented in order to demonstrate the applicability of the method to different classes of nonlocal media. The ability to admit generalized kernels reinforces the generalized nature of the displacement-driven approach over existing integral methodologies, which typically lead to simplified differential models based on exponential kernels. The theoretical formulation is also leveraged to simulate the static response of nonlocal beams and plates illustrating the intrinsic consistency of the approach, which is free from unwanted boundary effects. △ Less

Submitted 7 April, 2021; originally announced April 2021.

Comments: 7 figures, 20 pages of main text

Band Structure and Effective Properties of One-Dimensional Thermoacoustic Bloch Waves

Authors: Haitian Hao, Carlo Scalo, Fabio Semperlotti

Abstract: We investigate the dispersion characteristics and the effective properties of acoustic waves propagating in a one-dimensional duct equipped with periodic thermoacoustic coupling elements. Each coupling element consists in a classical thermoacoustic regenerator subject to a spatial temperature gradient. When acoustic waves pass through the regenerator, thermal-to-acoustic energy conversion takes pl… ▽ More We investigate the dispersion characteristics and the effective properties of acoustic waves propagating in a one-dimensional duct equipped with periodic thermoacoustic coupling elements. Each coupling element consists in a classical thermoacoustic regenerator subject to a spatial temperature gradient. When acoustic waves pass through the regenerator, thermal-to-acoustic energy conversion takes place and can either amplify or attenuate the wave, depending on the direction of propagation of the wave. The presence of the spatial gradient naturally induces a loss of reciprocity. This study provides a comprehensive theoretical model as well as an in-depth numerical analysis of the band structure and of the propagation properties of this thermoacoustically-coupled, tunable, one-dimensional metamaterial. Among the most significant findings, it is shown that the acoustic metamaterial is capable of supporting non-reciprocal thermoacoustic Bloch waves that are associated with a particular form of unidirectional energy transport. Remarkably, the thermoacoustic coupling also allows achieving effective zero compressibility and zero refractive index that ultimately lead to the phase invariance of the propagating sound waves. This single zero effective property is also shown to have very interesting implications in the attainment of acoustic cloaking. △ Less

Submitted 4 February, 2021; originally announced February 2021.

Comments: 14 pages, 11 figures, Submitting to Physical Review B

Journal ref: Phys. Rev. B 104, 104303 (2021)

Variable-Order Approach to Nonlocal Elasticity: Theoretical Formulation and Order Identification via Deep Learning Techniques

Authors: Mehdi Jokar, Sansit Patnaik, Fabio Semperlotti

Abstract: This study presents the application of variable-order (VO) fractional calculus to the modeling of nonlocal solids. The reformulation of nonlocal fractional-order continuum mechanic framework, by means of VO kinematics, enables a unique approach to the modeling of solids exhibiting position-dependent nonlocal behavior. The frame-invariance of the strain tensor is leveraged to identify constraints o… ▽ More This study presents the application of variable-order (VO) fractional calculus to the modeling of nonlocal solids. The reformulation of nonlocal fractional-order continuum mechanic framework, by means of VO kinematics, enables a unique approach to the modeling of solids exhibiting position-dependent nonlocal behavior. The frame-invariance of the strain tensor is leveraged to identify constraints on the definition of the VO. The VO nonlocal continuum formulation is then applied to model the response of Euler-Bernoulli type beams whose governing equations are derived in strong form by means of variational principles. The VO formulation is shown to be self-adjoint and positive-definite, which ensure that the governing equations are well-posed and free from boundary effects. These characteristics stand in contrast to classical integral approaches to nonlocal elasticity, where it is not always possible to obtain positive-definite and self-adjoint systems. A key step in promoting the use of VO approaches is to identify methodologies to determine the VO describing a given physical system. This study presents a deep learning based framework capable of solving the inverse problem consisting in the identification of the VO describing the behavior of the nonlocal beam on the basis of its response. It is established that the internal architecture of bidirectional recurrent neural networks makes them suitable for nonlocal boundary value problems, similar to the one treated in this study. Results show that the network accurately solves the inverse problem even for nonlocal beams with VO patterns inconsistent with the network training data set. Although presented in the context of a 1D Euler-Bernoulli beam, both the VO nonlocal formulation and the deep learning techniques are very general and could be extended to the solution of any general higher-dimensional VO boundary value problem. △ Less

Submitted 26 August, 2020; originally announced August 2020.

Fractional-Order Structural Stability: Formulation and Application to the Critical Load of Slender Structures

Authors: Sai Sidhardh, Sansit Patnaik, Fabio Semperlotti

Abstract: This study presents the framework to perform a stability analysis of nonlocal solids whose response is formulated according to the fractional-order continuum theory. In this formulation, space fractional-order operators are used to capture the nonlocal response of the medium by introducing nonlocal kinematic relations. First, we use the geometrically nonlinear fractional-order kinematic relations… ▽ More This study presents the framework to perform a stability analysis of nonlocal solids whose response is formulated according to the fractional-order continuum theory. In this formulation, space fractional-order operators are used to capture the nonlocal response of the medium by introducing nonlocal kinematic relations. First, we use the geometrically nonlinear fractional-order kinematic relations within an energy-based approach to establish the Lagrange-Dirichlet stability criteria for fractional-order nonlocal structures. This energy-based approach to nonlocal structural stability is possible due to a positive-definite and thermodynamically consistent definition of deformation energy enabled by the fractional-order kinematic formulation. Then, the Rayleigh-Ritz coefficient for the critical load is derived for linear buckling conditions. The fractional-order formulation is finally used to determine critical buckling loads of slender nonlocal beams and plates using a dedicated fractional-order finite element solver. Results establish that, in contrast to existing studies, the effect of nonlocal interactions is observed on both the material and the geometric stiffness, when using the fractional-order kinematics approach. We support these observations quantitatively with the help of case studies focusing on the critical buckling response of fractional-order nonlocal slender structures, and qualitatively via direct comparison of the fractional-order approach with the classical nonlocal approaches. △ Less

Submitted 15 August, 2020; originally announced August 2020.

Comments: 5 Figures, 9 Tables

Variable-Order Fracture Mechanics and its Application to Dynamic Fracture

Authors: Sansit Patnaik, Fabio Semperlotti

Abstract: This study presents the formulation, the numerical solution, and the validation of a theoretical framework based on the concept of variable-order mechanics and capable of modeling dynamic fracture in brittle and quasi-brittle solids. More specifically, the reformulation of the elastodynamic problem via variable and fractional order operators enables a unique and extremely powerful approach to mode… ▽ More This study presents the formulation, the numerical solution, and the validation of a theoretical framework based on the concept of variable-order mechanics and capable of modeling dynamic fracture in brittle and quasi-brittle solids. More specifically, the reformulation of the elastodynamic problem via variable and fractional order operators enables a unique and extremely powerful approach to model nucleation and propagation of cracks in solids under dynamic loading. The resulting dynamic fracture formulation is fully evolutionary hence enabling the analysis of complex crack patterns without requiring any a prior assumptions on the damage location and the growth path, as well as the use of any algorithm to track the evolving crack surface. The evolutionary nature of the variable-order formalism also prevents the need for additional partial differential equations to predict the damage field, hence suggesting a conspicuous reduction in the computational cost. Remarkably, the variable order formulation is naturally capable of capturing extremely detailed features characteristic of dynamic crack propagation such as crack surface roughening, single and multiple branching. The accuracy and robustness of the proposed variable-order formulation is validated by comparing the results of direct numerical simulations with experimental data of typical benchmark problems available in the literature. △ Less

Submitted 16 August, 2020; originally announced August 2020.

Comments: 14 pages, 3 images

Finite Element Network Analysis: A Machine Learning based Computational Framework for the Simulation of Physical Systems

Authors: Mehdi Jokar, Fabio Semperlotti

Abstract: This study introduces the concept of finite element network analysis (FENA) which is a physics-informed, machine-learning-based, computational framework for the simulation of complex physical systems. The framework leverages the extreme computational speed of trained neural networks and the unique transfer knowledge property of bidirectional recurrent neural networks (BRNN) to provide a uniquely p… ▽ More This study introduces the concept of finite element network analysis (FENA) which is a physics-informed, machine-learning-based, computational framework for the simulation of complex physical systems. The framework leverages the extreme computational speed of trained neural networks and the unique transfer knowledge property of bidirectional recurrent neural networks (BRNN) to provide a uniquely powerful and flexible computing platform. One of the most remarkable properties of this framework consists in its ability to simulate the response of complex systems, made of multiple interconnected components, by combining individually pre-trained network models that do not require any further training following the assembly phase. This remarkable result is achieved via the use of key concepts such as transfer knowledge and network concatenation. Although the computational framework is illustrated and numerically validated for the case of a mechanical system under static loading, the conceptual structure of the framework has broad applicability and could be extended to the most diverse field of computational science. The framework is numerically validated against the solution provided by traditional finite element analysis and the results highlight the outstanding performance of this new concept of computational platform. △ Less

Submitted 18 February, 2021; v1 submitted 17 August, 2020; originally announced August 2020.

Comments: Accepted for publication in Computers & Structures

Synthetic Kramers pair in phononic elastic plates and helical edge states on a dislocation interface

Authors: Ting-Wei Liu, Fabio Semperlotti

Abstract: In conventional theories, topological band properties are intrinsic characteristics of the bulk material and do not depend on the choice of the reference frame. In this scenario, the principle of bulk-edge correspondence can be used to predict the existence of edge states between topologically distinct materials. In this study, we propose and carefully examine a 2D elastic phononic plate with a Ke… ▽ More In conventional theories, topological band properties are intrinsic characteristics of the bulk material and do not depend on the choice of the reference frame. In this scenario, the principle of bulk-edge correspondence can be used to predict the existence of edge states between topologically distinct materials. In this study, we propose and carefully examine a 2D elastic phononic plate with a Kekulé-distorted honeycomb pattern engraved on it. It is found that the pseudospin and the pseudospin-dependent Chern numbers are not invariant properties, and the $\mathbb{Z}_2$ number is no longer a sufficient indicator to examine the existence of the edge state. The distinctive pseudospin texture and the pseudomagnetic field are also revealed. Finally, we successfully devise and experimentally implement the synthetic helical edge states on a dislocation interface connecting two subdomains with bulk pattern identical up to a relative translation. The edge state is also imaged via laser vibrometry. △ Less

Submitted 30 November, 2020; v1 submitted 15 August, 2020; originally announced August 2020.

Comments: Revision and adding Acknowledgements and Supporting Information

Towards a Generalized Approach to Nonlocal Elasticity via Fractional-Order Mechanics

Authors: Sansit Patnaik, Sai Sidhardh, Fabio Semperlotti

Abstract: This study presents a fractional-order continuum mechanics approach that allows combining selected characteristics of nonlocal elasticity, typical of classical integral and gradient formulations, under a single frame-invariant framework. The resulting generalized theory is capable of capturing both stiffening and softening effects and it is not subject to the inconsistencies often observed under s… ▽ More This study presents a fractional-order continuum mechanics approach that allows combining selected characteristics of nonlocal elasticity, typical of classical integral and gradient formulations, under a single frame-invariant framework. The resulting generalized theory is capable of capturing both stiffening and softening effects and it is not subject to the inconsistencies often observed under selected external loads and boundary conditions. The governing equations of a 1D continuum are derived by continualization of the Lagrangian of a 1D lattice subject to long-range interactions. This approach is particularly well suited to highlight the connection between the fractional-order operators and the microscopic properties of the medium. The approach is also extended to derive, by means of variational principles, the governing equations of a 3D continuum in strong form. The positive definite potential energy, characteristic of our fractional formulation, always ensures well-posed governing equations. This aspect, combined with the differ-integral nature of fractional-order operators, guarantees both stability and the ability to capture dispersion without requiring additional inertia gradient terms. The proposed formulation is applied to the static and free vibration analyses of either Timoshenko beams or Mindlin plates. Numerical results, obtained by a fractional-order finite element method, show that the fractional-order formulation is able to model both stiffening and softening response in these slender structures. The numerical results provide the foundation to critically analyze the physical significance of the different fractional model parameters as well as their effect on the response of the structural elements. △ Less

Submitted 18 May, 2020; originally announced May 2020.

Comments: 36 pages, 15 figures

Thermodynamics of fractional-order nonlocal continua and its application to the thermoelastic response of beams

Authors: Sai Sidhardh, Sansit Patnaik, Fabio Semperlotti

Abstract: This study presents a comprehensive framework for constitutive modeling of a frame-invariant fractional-order approach to nonlocal thermoelasticity in solids. For this purpose, thermodynamic and mechanical balance laws are derived for nonlocal solids modeled using the fractional-order continuum theory. This includes revisiting the Cauchy's hypothesis for surface traction vector in order to account… ▽ More This study presents a comprehensive framework for constitutive modeling of a frame-invariant fractional-order approach to nonlocal thermoelasticity in solids. For this purpose, thermodynamic and mechanical balance laws are derived for nonlocal solids modeled using the fractional-order continuum theory. This includes revisiting the Cauchy's hypothesis for surface traction vector in order to account for long-range interactions across the domain of nonlocal solid. Remarkably, it is shown that the fractional-order model allows the rigorous localized application of thermodynamic balance principles unlike existing integral approaches to nonlocal elasticity. Further, the mechanical governing equations of motion for the fractional-order solids obtained here are consistent with existing results from variational principles. These fractional-order governing equations involve self-adjoint operators and admit unique solutions, in contrast to analogous studies following the local Cauchy's hypothesis. To illustrate the efficacy of this framework, case-studies for the linear and the geometrically nonlinear responses of nonlocal beams subject to combined thermomechanical loads are considered here. Comparisons with existing integer-order integral nonlocal approaches highlight a consistent softening response of nonlocal structures predicted by the fractional-order framework, irrespective of the boundary and thermomechanical loading conditions. This latter aspect addresses an important incongruence often observed in strain-based integral approaches to nonlocal elasticity. △ Less

Submitted 9 February, 2021; v1 submitted 3 March, 2020; originally announced March 2020.

Comments: 33 pages, 14 figures

Nonlocal elastic metasurfaces: enabling broadband wave control via intentional nonlocality

Authors: Hongfei Zhu, Timothy F. Walsh, Bradley H. Jared, Fabio Semperlotti

Abstract: While elastic metasurfaces offer a remarkable and very effective approach to the subwalength control of stress waves, their use in practical applications is severely hindered by intrinsically narrow band performance. This work introduces the concept of intentional nonlocality as a fundamental mechanism to design passive elastic metasurfaces capable of an exceptionally broadband operating range. Th… ▽ More While elastic metasurfaces offer a remarkable and very effective approach to the subwalength control of stress waves, their use in practical applications is severely hindered by intrinsically narrow band performance. This work introduces the concept of intentional nonlocality as a fundamental mechanism to design passive elastic metasurfaces capable of an exceptionally broadband operating range. The nonlocal behavior is achieved by exploiting nonlocal forces, conceptually akin to long-range interactions in nonlocal material microstructures, between subsets of resonant unit cells forming the metasurface. These long-range forces are obtained via carefully crafted flexible elements whose specific geometry and local dynamics are designed to create remarkably complex transfer functions between multiple units. The resulting nonlocal coupling forces enable achieving phase gradient profiles that are function of the wavenumber of the incident wave.The identification of relevant design parameters and the assessment of their impact on performance are explored via a combination of semi-analytical and numerical models. The nonlocal metasurface concept is tested, both numerically and experimentally, by embedding a total-internal-reflection design in a thin plate waveguide. Results confirm the feasibility of the intentionally nonlocal design concept and its ability to achieve a fully passive and broadband wave control. △ Less

Submitted 24 February, 2020; originally announced February 2020.

Fractional-Order Models for the Static and Dynamic Analysis of Nonlocal Plates

Authors: Sansit Patnaik, Sai Sidhardh, Fabio Semperlotti

Abstract: This study presents the analytical formulation and the finite element solution of fractional order nonlocal plates under both Mindlin and Kirchoff formulations. By employing consistent definitions for fractional-order kinematic relations, the governing equations and the associated boundary conditions are derived based on variational principles. Remarkably, the fractional-order nonlocal model gives… ▽ More This study presents the analytical formulation and the finite element solution of fractional order nonlocal plates under both Mindlin and Kirchoff formulations. By employing consistent definitions for fractional-order kinematic relations, the governing equations and the associated boundary conditions are derived based on variational principles. Remarkably, the fractional-order nonlocal model gives rise to a self-adjoint and positive-definite system that accepts a unique solution. Further, owing to the difficulty in obtaining analytical solutions to this fractional-order differ-integral problem, a 2D finite element model for the fractional-order governing equations is presented. Following a thorough validation with benchmark problems, the 2D fractional finite element model is used to study the static as well as the free dynamic response of fractional-order plates subject to various loading and boundary conditions. It is established that the fractional-order nonlocality leads to a reduction in the stiffness of the plate structure thereby increasing the displacements and reducing the natural frequency of vibration of the plates. Further, it is seen that the effect of nonlocality is stronger on the higher modes of vibration when compared to the fundamental mode. These effects of the fractional-order nonlocality are noted irrespective of the nature of the boundary conditions. More specifically, the fractional-order model of nonlocal plates is free from boundary effects that lead to paradoxical predictions such as hardening and absence of nonlocal effects in classical integral approaches to nonlocal elasticity. This consistency in the predictions is a result of the well-posed nature of the fractional-order governing equations that accept a unique solution. △ Less

Submitted 19 February, 2020; originally announced February 2020.

Comments: 26 pages, 3 figures, 13 Tables. arXiv admin note: text overlap with arXiv:2001.06885, arXiv:2002.07148

Weyl points and topological surface states in a three-dimensional elastic lattice

Authors: Sai Sanjit Ganti, Ting-Wei Liu, Fabio Semperlotti

Abstract: Following the realization of Weyl semimetals in quantum electronic materials, classical wave analogues of Weyl materials have also been theorized and experimentally demonstrated in photonics and acoustics. Weyl points in elastic systems, however, have been a much more recent discovery. In this study, we report on the design of an elastic fully-continuum three-dimensional material that, while offer… ▽ More Following the realization of Weyl semimetals in quantum electronic materials, classical wave analogues of Weyl materials have also been theorized and experimentally demonstrated in photonics and acoustics. Weyl points in elastic systems, however, have been a much more recent discovery. In this study, we report on the design of an elastic fully-continuum three-dimensional material that, while offering structural and load-bearing functionalities, is also capable of Weyl degeneracies and surface topologically-protected modes in a way completely analogous to the quantum mechanical counterpart. The topological characteristics of the lattice are obtained by \textit{ab initio} numerical calculations without employing any further simplifications. The results clearly characterize the topological structure of the Weyl points and are in full agreement with the expectations of surface topological modes. Finally, full field numerical simulations are used to confirm the existence of surface states and to illustrate their extreme robustness towards lattice disorder and defects. △ Less

Submitted 19 February, 2020; originally announced February 2020.

Geometrically Nonlinear Response of a Fractional-Order Nonlocal Model of Elasticity

Authors: Sai Sidhardh, Sansit Patnaik, Fabio Semperlotti

Abstract: This study presents the analytical and finite element formulation of a geometrically nonlinear and fractional-order nonlocal model of an Euler-Bernoulli beam. The finite nonlocal strains in the Euler-Bernoulli beam are obtained from a frame-invariant and dimensionally consistent fractional-order (nonlocal) continuum formulation. The finite fractional strain theory provides a positive definite form… ▽ More This study presents the analytical and finite element formulation of a geometrically nonlinear and fractional-order nonlocal model of an Euler-Bernoulli beam. The finite nonlocal strains in the Euler-Bernoulli beam are obtained from a frame-invariant and dimensionally consistent fractional-order (nonlocal) continuum formulation. The finite fractional strain theory provides a positive definite formulation that results in a mathematically well-posed formulation which is consistent across loading and boundary conditions. The governing equations and the corresponding boundary conditions of the geometrically nonlinear and nonlocal Euler-Bernoulli beam are obtained using variational principles. Further, a nonlinear finite element model for the fractional-order system is developed in order to achieve the numerical solution of the integro-differential nonlinear governing equations. Following a thorough validation with benchmark problems, the fractional finite element model (f-FEM) is used to study the geometrically nonlinear response of a nonlocal beam subject to various loading and boundary conditions. Although presented in the context of a 1D beam, this nonlinear f-FEM formulation can be extended to higher dimensional fractional-order boundary value problems. △ Less

Submitted 18 June, 2020; v1 submitted 14 February, 2020; originally announced February 2020.

Comments: arXiv admin note: substantial text overlap with arXiv:2001.06885 In the updated version Figures 3 and 9, additional details in section 4.3 and appendix 1 were added following comments from reviewers

A Ritz-based Finite Element Method for a Fractional-Order Boundary Value Problem of Nonlocal Elasticity

Authors: Sansit Patnaik, Sai Sidhardh, Fabio Semperlotti

Abstract: We present the analytical formulation and the finite element solution of a fractional-order nonlocal continuum model of a Euler-Bernoulli beam. Employing consistent definitions for the fractional-order kinematic relations, the governing equations and the associated boundary conditions are derived based on variational principles. Remarkably, the fractional-order nonlocal model gives rise to a self-… ▽ More We present the analytical formulation and the finite element solution of a fractional-order nonlocal continuum model of a Euler-Bernoulli beam. Employing consistent definitions for the fractional-order kinematic relations, the governing equations and the associated boundary conditions are derived based on variational principles. Remarkably, the fractional-order nonlocal model gives rise to a self-adjoint and positive-definite system accepting a unique solution. Further, owing to the difficulty in obtaining analytical solutions to this boundary value problem, a finite element model for the fractional-order governing equations is presented. Following a thorough validation with benchmark problems, the fractional finite element model (f-FEM) is used to study the nonlocal response of a Euler-Bernoulli beam subjected to various loading and boundary conditions. The fractional-order positive definite system will be used here to address some paradoxical results obtained for nonlocal beams through classical integral approaches to nonlocal elasticity. Although presented in the context of a 1D Euler-Bernoulli beam, the f-FEM formulation is very general and could be extended to the solution of any general fractional-order boundary value problem. △ Less

Submitted 2 June, 2020; v1 submitted 19 January, 2020; originally announced January 2020.

Comments: 35 pages, 10 figures, 2 tables. In revised version, a new subsection 2.2; additional results (in the form of Table 2); and appendix 1 was added following comments from peers during the review process

Non-conventional topological band properties and gapless helical edge states in elastic phononic waveguides with Kekulé distortion

Authors: Ting-Wei Liu, Fabio Semperlotti

Abstract: This study investigates the topological behavior of a continuous elastic phononic structure characterized by a 3-term Kekulé distortion. The elastic waveguide consists of a hexagonal unit cell whose geometric dimensions are intentionally perturbed according to a generalized Kekulé scheme. The resulting structure exhibits an effective Hamiltonian that resembles a quantum spin Hall system, hence sug… ▽ More This study investigates the topological behavior of a continuous elastic phononic structure characterized by a 3-term Kekulé distortion. The elastic waveguide consists of a hexagonal unit cell whose geometric dimensions are intentionally perturbed according to a generalized Kekulé scheme. The resulting structure exhibits an effective Hamiltonian that resembles a quantum spin Hall system, hence suggesting that the waveguide can support helical topological edge states. Using first-principles calculations, we show the existence of nondegenerate pseudospin states and a very peculiar 6-lobe pseudospin texture and Berry curvature pattern. Important insights are also provided concerning the topological states in the Kekulé lattice, so far considered indistinguishable, and their critical role in enabling unique gapless edge states, typically not achievable in phononic systems. △ Less

Submitted 6 December, 2019; v1 submitted 11 July, 2019; originally announced July 2019.

Journal ref: Phys. Rev. B 100, 214110 (2019)

Total-internal-reflection elastic metasurfaces: design and application to structural vibration isolation

Authors: Hongfei Zhu, Timothy F. Walsh, Fabio Semperlotti

Abstract: This letter presents the concept of Total Internal Reflection metasurface (TIR-MS) which supports the realization of structure-embedded subwavelength acoustic shields for elastic waves propagating in thin waveguides. The proposed metasurface design exploits extreme phase gradients, implemented via locally resonant elements, in order to achieve operating conditions that are largely beyond the criti… ▽ More This letter presents the concept of Total Internal Reflection metasurface (TIR-MS) which supports the realization of structure-embedded subwavelength acoustic shields for elastic waves propagating in thin waveguides. The proposed metasurface design exploits extreme phase gradients, implemented via locally resonant elements, in order to achieve operating conditions that are largely beyond the critical angle. Such artificial discontinuity is capable of producing complete reflection of the incoming waves regardless of the specific angle of incidence. From a practical perspective, the TIR-MS behaves as a sound hard barrier that is impenetrable to long-wavelength modes at a selected frequency. The TIR metasurface concept is first conceived for a flat interface embedded in a rectangular waveguide and designed to block longitudinal S0-type guided modes. Then, it is extended to circular plates in order to show how enclosed areas can be effectively shielded by incoming waves. Given the same underlying physics, an equivalent dynamic behavior was also numerically and experimentally illustrated for flexural A0-type guided modes. This study shows numerical and experimental evidence that, when the metasurface is excited at the target frequency, significant vibration isolation can be achieved in presence of waves having any arbitrary angle of incidence. These results open interesting paths to achieve vibration isolation and energy filtering in certain prototypical structures of interest for practical engineering applications. △ Less

Submitted 28 October, 2018; originally announced October 2018.

Analysis of dispersion and propagation properties in a periodic rod using a space-fractional wave equation

Authors: John Hollkamp, Mihir Sen, Fabio Semperlotti

Abstract: This study explores the use of fractional calculus as a possible tool to model wave propagation in complex, heterogeneous media. We illustrate the methodology by focusing on elastic wave propagation in a one-dimensional periodic rod. The governing equations describing the wave propagation problem in inhomogeneous systems typically consist of partial differential equations with spatially varying co… ▽ More This study explores the use of fractional calculus as a possible tool to model wave propagation in complex, heterogeneous media. We illustrate the methodology by focusing on elastic wave propagation in a one-dimensional periodic rod. The governing equations describing the wave propagation problem in inhomogeneous systems typically consist of partial differential equations with spatially varying coefficients. Even for very simple systems, these models require numerical solutions which are computationally expensive and do not provide the valuable insights associated with closed-form solutions. We will show that fractional calculus can provide a powerful approach to develop comprehensive mathematical models of inhomogeneous systems that can effectively be regarded as homogenized models. Although at first glance the mathematics might appear more complex, these fractional order models can allow the derivation of closed-form analytical solutions that provide excellent estimations of the systems' dynamic responses. Equally important, these solutions are valid in a frequency range that goes largely beyond the well-known homogenization limit of traditional integer order approaches, therefore providing a possible route to high-frequency homogenization. More specifically, this study focuses on the analyses of the dispersion and propagation properties of a periodic medium under single-tone harmonic excitation and illustrates the methodology to obtain a space-fractional wave equation capable of capturing the behavior of the physical system. The fractional wave equation and its analytical solution are compared with numerical results obtained via a traditional finite element method in order to assess their validity and evaluate their performance. It is found that the resulting fractional differential models are, in their most general form, of complex and frequency-dependent order. △ Less

Submitted 5 July, 2018; originally announced August 2018.

Traveling and standing thermoacoustic waves in solid media

Authors: Haitian Hao, Carlo Scalo, Fabio Semperlotti

Abstract: The most attractive application of fluid-based thermoacoustic (TA) energy conversion involves traveling wave devices due to their low onset temperature ratios and high growth rates. Recently, theoretical and numerical studies have shown that thermoacoustic effects can exist also in solids. However, these initial studies only focus on standing waves. This paper presents a numerical study investigat… ▽ More The most attractive application of fluid-based thermoacoustic (TA) energy conversion involves traveling wave devices due to their low onset temperature ratios and high growth rates. Recently, theoretical and numerical studies have shown that thermoacoustic effects can exist also in solids. However, these initial studies only focus on standing waves. This paper presents a numerical study investigating the existence of self-sustained thermoelastic oscillations associated with traveling wave modes in a looped solid rod under the effect of a localized thermal gradient. Configurations having different ratios of the rod radius $R$ to the thermal penetration depth $δ_k$ were explored and the traveling wave component (TWC) was found to become dominant as $R$ approaches $δ_k$. The growth-rate-to-frequency ratio of the traveling TA wave is found to be significantly larger than that of the standing wave counterpart for the same wavelength. The perturbation energy budgets are analytically formulated and closed, shedding light onto the energy conversion processes of solid-state thermoacoustic (SSTA) engines and highlighting differences with fluids. Efficiency is also quantified based on the thermoacoustic production and dissipation rates evaluated from the energy budgets. △ Less

Submitted 14 June, 2018; originally announced June 2018.

Comments: 28 pages, 9 figures, Submitted to Journal of Sound and Vibration

Tomographic imaging of inhomogeneous non-local media using fractional order models

Authors: Salvatore Buonocore, Fabio Semperlotti

Abstract: We investigate a generalized tomographic imaging framework applicable to a class of inhomogeneous media characterized by non-local diffusive energy transport. Under these conditions, the transport mechanism is well described by fractional-order continuum models capable of capturing anomalous diffusion that would otherwise remain undetected when using traditional integer-order models. Although the… ▽ More We investigate a generalized tomographic imaging framework applicable to a class of inhomogeneous media characterized by non-local diffusive energy transport. Under these conditions, the transport mechanism is well described by fractional-order continuum models capable of capturing anomalous diffusion that would otherwise remain undetected when using traditional integer-order models. Although the underlying idea of the proposed framework is applicable to any transport mechanism, the case of fractional heat conduction is presented as a specific example to illustrate the methodology. By using numerical simulations, we show how complex inhomogeneous media involving non-local transport, can be successfully imaged if fractional order models are used. In particular, results will show that by properly recognizing and accounting for the fractional character of the host medium not only allows achieving increased resolution but, in case of strong and spatially distributed non-locality, it represents the only viable approach to achieve a successful reconstruction. △ Less

Submitted 18 April, 2018; originally announced April 2018.

Comments: 8 pages, 6 figures

Occurrence of anomalous diffusion and non-local response in highly-scattering acoustic periodic media

Authors: Salvatore Buonocore, Mihir Sen, Fabio Semperlotti

Abstract: We investigate the occurrence of anomalous diffusive transport associated with acoustic wave fields propagating through highly-scattering periodic media. Previous studies had correlated the occurrence of anomalous diffusion to either the random properties of the scattering medium or to the presence of localized disorder. In this study, we show that anomalous diffusive transport can occur also in p… ▽ More We investigate the occurrence of anomalous diffusive transport associated with acoustic wave fields propagating through highly-scattering periodic media. Previous studies had correlated the occurrence of anomalous diffusion to either the random properties of the scattering medium or to the presence of localized disorder. In this study, we show that anomalous diffusive transport can occur also in perfectly periodic media and in the absence of disorder. The analysis of the fundamental physical mechanism leading to this unexpected behavior is performed via a combination of deterministic, stochastic, and fractional-order models in order to capture the different elements contributing to this phenomenon. Results indicate that this anomalous transport can indeed occur in perfectly periodic media when the dispersion behavior is characterized by anisotropic (partial) bandgaps. In selected frequency ranges, the propagation of acoustic waves not only becomes diffusive but its intensity distribution acquires a distinctive Lévy alpha-stable profile having pronounced heavy-tails. In these ranges, the acoustic transport in the medium occurs according to a hybrid transport mechanism which is simultaneously propagating and anomalously diffusive. We show that such behavior is well captured by a fractional diffusive transport model whose order can be obtained by the analysis of the heavy tails. △ Less

Submitted 17 April, 2018; originally announced April 2018.

Comments: 15 pages, 22 figures

Experimental evidence of robust acoustic valley Hall edge states in a non-resonant topological elastic waveguide

Authors: Ting-Wei Liu, Fabio Semperlotti

Abstract: This paper presents experimental evidence of the existence of acoustic valley Hall (AVHE) edge states in topological elastic waveguides. The fundamental lattice is assembled based on a non-resonant unit where space inversion symmetry (SIS) is broken by simply perturbing the underlying lattice geometry. This aspect is in net contrast with existing elastic AVHE designs that exploit locally-resonant… ▽ More This paper presents experimental evidence of the existence of acoustic valley Hall (AVHE) edge states in topological elastic waveguides. The fundamental lattice is assembled based on a non-resonant unit where space inversion symmetry (SIS) is broken by simply perturbing the underlying lattice geometry. This aspect is in net contrast with existing elastic AVHE designs that exploit locally-resonant units and require the addition of masses in order to break SIS. The experimental results presented in this study validate findings so far presented only at theoretical and numerical level. In particular, it is found that edge modes can effectively propagate along domain walls between topologically dissimilar domains and that disorder-induced backscattering is substantially suppressed due to the weak coupling between oppositely valley-polarized modes. The coupling between valley modes is also further investigated and linked to an evident chiral flux of the mechanical energy. Finally, we show that the weak coupling between the valleys can be exploited to achieve selective mode injection at the domain wall, hence realizing a very effective excitation strategy of the chiral edge states. △ Less

Submitted 21 December, 2018; v1 submitted 13 March, 2018; originally announced March 2018.

Comments: 12 pages, 15 figures

Journal ref: Phys. Rev. Applied 11, 014040 (2019)

Design and Experimental Observation of Valley-Hall Edge States in Diatomic-Graphene-like Elastic Waveguides

Authors: Hongfei Zhu, Ting-Wei Liu, Fabio Semperlotti

Abstract: We report on the design and experimental validation of a two-dimensional phononic elastic waveguide exhibiting topological Valley-Hall edge states. The lattice structure of the waveguide is inspired by the diatomic graphene and it is imprinted in an initially flat plate by means of geometric indentations. The indentations are distributed according to a hexagonal lattice structure which guarantees… ▽ More We report on the design and experimental validation of a two-dimensional phononic elastic waveguide exhibiting topological Valley-Hall edge states. The lattice structure of the waveguide is inspired by the diatomic graphene and it is imprinted in an initially flat plate by means of geometric indentations. The indentations are distributed according to a hexagonal lattice structure which guarantees the existence of Dirac dispersion at the boundary of the Brillouin zone. Starting from this basic material, domain walls capable of supporting edge states can be obtained by contrasting waveguides having broken space inversion symmetry (SIS) achieved by using local resonant elements. Our theoretical study shows that such material maps into the acoustic analog of the quantum valley Hall effect (QVHE) while numerical and experimental results confirm the existence of protected edge states traveling along the walls of topologically distinct domains. △ Less

Submitted 29 December, 2017; originally announced December 2017.

Journal ref: Phys. Rev. B 97, 174301 (2018)

Thermoacoustics of solids: a pathway to solid state engines and refrigerators

Authors: Haitian Hao, Carlo Scalo, Mihir Sen, Fabio Semperlotti

Abstract: Thermoacoustic oscillations have been one of the most exciting discoveries of the physics of fluids in the 19th century. Since its inception, scientists have formulated a comprehensive theoretical explanation of the basic phenomenon which has later found several practical applications to engineering devices. To-date, all studies have concentrated on the thermoacoustics of fluid media where this fa… ▽ More Thermoacoustic oscillations have been one of the most exciting discoveries of the physics of fluids in the 19th century. Since its inception, scientists have formulated a comprehensive theoretical explanation of the basic phenomenon which has later found several practical applications to engineering devices. To-date, all studies have concentrated on the thermoacoustics of fluid media where this fascinating mechanism was exclusively believed to exist. Our study shows theoretical and numerical evidence of the existence of thermoacoustic instabilities in solid media. Although the underlying physical mechanism is analogous to its counterpart in fluids, the theoretical framework highlights relevant differences that have important implications on the ability to trigger and sustain the thermoacoustic response. This mechanism could pave the way to the development of highly robust and reliable solid-state thermoacoustic engines and refrigerators. △ Less

Submitted 30 August, 2017; originally announced August 2017.

Comments: 23 pages, 4 figures. To be published

Journal ref: J. Appl. Phys. 123 (2018) 024903

Tunable Acoustic Valley-Hall Edge States in Reconfigurable Phononic Elastic Waveguides

Authors: Ting-Wei Liu, Fabio Semperlotti

Abstract: This study investigates the occurrence of acoustic topological edge states in a 2D phononic elastic waveguide due to a phenomenon that is the acoustic analogue of the quantum valley Hall effect. We show that a topological transition takes place between two lattices having broken space inversion symmetry due to the application of a tunable strain field. This condition leads to the formation of gapl… ▽ More This study investigates the occurrence of acoustic topological edge states in a 2D phononic elastic waveguide due to a phenomenon that is the acoustic analogue of the quantum valley Hall effect. We show that a topological transition takes place between two lattices having broken space inversion symmetry due to the application of a tunable strain field. This condition leads to the formation of gapless edge states at the domain walls, as further illustrated by the analysis of the bulk-edge correspondence and of the associated topological invariants. Although time reversal symmetry is still intact in these systems, the edge states are topologically protected when inter-valley mixing is either weak or negligible. Interestingly, topological edge states can also be triggered at the boundary of a single domain if boundary conditions are properly selected. We also show that the static modulation of the strain field allows tuning the response of the material between the different supported edge states. △ Less

Submitted 24 October, 2017; v1 submitted 9 August, 2017; originally announced August 2017.

Comments: 9 pages, 13 figures

Journal ref: Phys. Rev. Applied 9, 014001 (2018)

Double-zero-index structural waveguides

Authors: Hongfei Zhu, Fabio Semperlotti

Abstract: We report on the theoretical and experimental realization of a double-zero-index elastic waveguide and on the corresponding acoustic cloacking and supercoupling effects. The proposed waveguide uses geometric tapers in order to induce Dirac-like cones at $\vec{k} = 0$ due to accidental degeneracy. The nature of the degeneracy is explored by a $k\cdot p$ perturbation method adapted to thin structura… ▽ More We report on the theoretical and experimental realization of a double-zero-index elastic waveguide and on the corresponding acoustic cloacking and supercoupling effects. The proposed waveguide uses geometric tapers in order to induce Dirac-like cones at $\vec{k} = 0$ due to accidental degeneracy. The nature of the degeneracy is explored by a $k\cdot p$ perturbation method adapted to thin structural waveguides. Results confirm the linear nature of the dispersion around the degeneracy and the possibility to map the material to effective medium properties. Effective parameters, numerically extracted using boundary medium theory, confirm that the phononic waveguide maps into a double zero index material. Numerical and experimental results confirm the expected cloacking and supecoupling effects typical of zero index materials. △ Less

Submitted 5 June, 2017; originally announced June 2017.

Journal ref: Phys. Rev. Applied 8, 064031 (2017)

Two-Dimensional Structure-Embedded Acoustic Lenses based on Periodic Acoustic Black Holes

Authors: Hongfei Zhu, Fabio Semperlotti

Abstract: Recent studies have introduced a new class of two-dimensional acoustic metamaterials whose dispersion and propagation properties results from the use of geometric inhomogeneities in the form of Acoustic Black Holes (ABH). The ABH is an element able to smoothly bend and slow down elastic waves, therefore providing a variety of unconventional dispersion and propagation properties typically observed… ▽ More Recent studies have introduced a new class of two-dimensional acoustic metamaterials whose dispersion and propagation properties results from the use of geometric inhomogeneities in the form of Acoustic Black Holes (ABH). The ABH is an element able to smoothly bend and slow down elastic waves, therefore providing a variety of unconventional dispersion and propagation properties typically observed in more complex multi-material and locally resonant designs. This approach enables thin-walled structural elements having fully embedded acoustic lenses capable of different functionalities such as focusing, collimation, and negative refraction. Numerical simulations show that such structures exhibit broadband operating conditions that span both the metamaterial and the phononic range. Full field experimental measurements allow validating the design approach and confirm the performance of the embedded acoustic lens. △ Less

Submitted 8 January, 2017; originally announced January 2017.

Model-order reduction of lumped parameter systems via fractional calculus

Authors: John P. Hollkamp, Mihir Sen, Fabio Semperlotti

Abstract: This study investigates the use of fractional order differential models to simulate the dynamic response of non-homogeneous discrete systems and to achieve efficient and accurate model order reduction. The traditional integer order approach to the simulation of non-homogeneous systems dictates the use of numerical solutions and often imposes stringent compromises between accuracy and computational… ▽ More This study investigates the use of fractional order differential models to simulate the dynamic response of non-homogeneous discrete systems and to achieve efficient and accurate model order reduction. The traditional integer order approach to the simulation of non-homogeneous systems dictates the use of numerical solutions and often imposes stringent compromises between accuracy and computational performance. Fractional calculus provides an alternative approach where complex dynamical systems can be modeled with compact fractional equations that not only can still guarantee analytical solutions, but can also enable high levels of order reduction without compromising on accuracy. Different approaches are explored in order to transform the integer order model into a reduced order fractional model able to match the dynamic response of the initial system. Analytical and numerical results show that, under certain conditions, an exact match is possible and the resulting fractional differential models have both a complex and frequency-dependent order of the differential operator. The implications of this type of approach for both model order reduction and model synthesis are discussed. △ Less

Submitted 20 December, 2016; originally announced December 2016.

Comments: 21 pages, 11 figures

Implicit operators for networked mechanical and thermal systems with integer-order components

Authors: Mihir Sen, John P. Hollkamp, Fabio Semperlotti, Bill Goodwine

Abstract: Complex systems are composed of a large number of simple components connected to each other in the form of a network. It is shown that, for some network configurations, the equivalent dynamic behavior of the system is governed by an implicit integro-differential operator even though the individual components themselves satisfy equations that use explicit operators of integer order. The networks co… ▽ More Complex systems are composed of a large number of simple components connected to each other in the form of a network. It is shown that, for some network configurations, the equivalent dynamic behavior of the system is governed by an implicit integro-differential operator even though the individual components themselves satisfy equations that use explicit operators of integer order. The networks considered here are infinite trees and ladders, and each is composed only of two types of integer-order components with potential-driven flows that are repeated ad infinitum. In special cases the equivalent operator for the system is a fractional-order derivative, but in general it is implicit and can only be expressed as a solution of an operator equation. These implicit operators, which are a generalization of fractional-order derivatives, play an important role in the analysis and modeling of complex systems. △ Less

Submitted 2 April, 2016; originally announced April 2016.

Anomalous refraction of acoustic guided waves in solids with geometrically tapered metasurfaces

Authors: Hongfei Zhu, Fabio Semperlotti

Abstract: The concept of metasurface has recently opened new exciting directions to engineer the refraction properties in both optical and acoustic media. Metasurfaces are typically designed by assembling arrays of sub-wavelength anisotropic scatterers able to mold incoming wavefronts in rather unconventional ways. The concept of metasurface was pioneered in photonics and later extended to acoustics while i… ▽ More The concept of metasurface has recently opened new exciting directions to engineer the refraction properties in both optical and acoustic media. Metasurfaces are typically designed by assembling arrays of sub-wavelength anisotropic scatterers able to mold incoming wavefronts in rather unconventional ways. The concept of metasurface was pioneered in photonics and later extended to acoustics while its application to the propagation of elastic waves in solids is relatively unexplored. We investigate the design of acoustic metasurfaces to control elastic guided waves in thin-walled structural elements. These engineered discontinuities enable anomalous refraction of guided wave modes consistently with the generalized Snell's law. The metasurfaces are made out of locally-resonant torus-like tapers enabling accurate phase shift of the incoming wave which ultimately affects the refraction properties. We show that anomalous refraction can be achieved on transmitted antisymmetric modes ($A_0$) either when using a symmetric ($S_0$) or antisymmetric ($A_0$) incident wave, the former clearly involving mode conversion. The same metasurface design also allows achieving structure embedded planar focal lenses and phase masks for non-paraxial propagation. △ Less

Submitted 20 March, 2016; originally announced March 2016.

Journal ref: Phys. Rev. Lett. 117, 034302 (2016)

Phononic Thin Plates with Embedded Acoustic Black Holes

Authors: Hongfei Zhu, Fabio Semperlotti

Abstract: We introduce a class of two-dimensional non-resonant single-phase phononic materials and investigate its peculiar dispersion characteristics. The material consists of a thin plate-like structure with an embedded periodic lattice of Acoustic Black Holes. The use of these periodic tapers allows achieving remarkable dispersion properties such as Zero Group Velocity in the fundamental modes, negative… ▽ More We introduce a class of two-dimensional non-resonant single-phase phononic materials and investigate its peculiar dispersion characteristics. The material consists of a thin plate-like structure with an embedded periodic lattice of Acoustic Black Holes. The use of these periodic tapers allows achieving remarkable dispersion properties such as Zero Group Velocity in the fundamental modes, negative group refraction index, bi-refraction, and mode anisotropy. The dispersion properties are numerically investigated using a three-dimensional supercell plane wave expansion method. The effect on the dispersion characteristics of key geometric parameters of the black hole, such as the taper profile and the residual thickness, are also explored. △ Less

Submitted 1 October, 2014; originally announced October 2014.

A passively tunable non-resonant acoustic metamaterial lens for selective ultrasonic excitation

Authors: Hongfei Zhu, Fabio Semperlotti

Abstract: In this paper, we present an approach to ultrasonic beam-forming and beam-steering in structures based on the concept of embedded non-resonant acoustic metamaterial lenses. The lens design exploits the principle of acoustic drop-channel which enables the dynamic coupling of multiple ultrasonic waveguides at selected frequencies. In contrast with currently available technology, the embedded lens al… ▽ More In this paper, we present an approach to ultrasonic beam-forming and beam-steering in structures based on the concept of embedded non-resonant acoustic metamaterial lenses. The lens design exploits the principle of acoustic drop-channel which enables the dynamic coupling of multiple ultrasonic waveguides at selected frequencies. In contrast with currently available technology, the embedded lens allows generating directional excitation by means of a single ultrasonic transducer. The lens design and performance are numerically investigated by using Plane Wave Expansion and Finite Difference Time Domain techniques applied to bulk structures. Then, the design is experimentally validated on a thin aluminum plate where the lens is implemented by through-holes. The dynamic response of the embedded lens is estimated by reconstructing, via Laser Vibrometry, the velocity field induced by a piezoelectric shaker source. △ Less

Submitted 4 July, 2014; originally announced July 2014.

Achieving Selective Damage Interrogation and Sub-Wavelength Resolution in Thin Plates with Embedded Metamaterial Acoustic Lenses

Authors: Fabio Semperlotti, Hongfei Zhu

Abstract: In this study, we present an approach to ultrasonic beamforming and high resolution identification of acoustic sources having critical implications for structural health monitoring technology. The proposed concept is based on the design of dynamically tailored structural elements via embedded acoustic metamaterial lenses. This approach provides a completely new alternative to conventional phased-a… ▽ More In this study, we present an approach to ultrasonic beamforming and high resolution identification of acoustic sources having critical implications for structural health monitoring technology. The proposed concept is based on the design of dynamically tailored structural elements via embedded acoustic metamaterial lenses. This approach provides a completely new alternative to conventional phased-array technology enabling the formation of steerable and collimated (or focused) ultrasonic beams by exploiting a single transducer. The ultrasonic beams can be steered by simply tuning the frequency of the excitation. Also, the embedded lens can be designed to achieve sub-wavelength resolution to incipient clustered damage. △ Less

Submitted 18 December, 2013; originally announced December 2013.