-
Acoustically Transparent Alumina-based Cranial Implants Enhance Ultrasound Transmission Through a Combined Mechano-Acoustic Resonant Effect
Authors:
Mario Ibrahin Gutierrez,
Pathikumar Sellappan,
Elias H. Penilla,
Irais Poblete-Naredo,
Arturo Vera,
Lorenzo Leija,
Javier E. Garay
Abstract:
Therapeutic ultrasound for brain stimulation has increased in the last years. This energy has shown promising results for treating Alzheimers disease, Parkinsons disease, and traumatic brain injury, among other conditions. However, the application of ultrasound in the brain should trespass a natural but highly attenuating and distorting barrier, the cranium. Implantable ceramic materials can be us…
▽ More
Therapeutic ultrasound for brain stimulation has increased in the last years. This energy has shown promising results for treating Alzheimers disease, Parkinsons disease, and traumatic brain injury, among other conditions. However, the application of ultrasound in the brain should trespass a natural but highly attenuating and distorting barrier, the cranium. Implantable ceramic materials can be used to replace part of the cranium as an alternate method to enhance ultrasound transmission. In this work, it is presented the acoustic characterization of alumina ceramic disks that can be employed as cranial implants for acoustic windows-to-the-brain. Alumina samples were prepared using current-activated pressure-assisted densification and were acoustically characterized. Acoustic impedance and attenuation of the samples were determined for different porosities. Additionally, measured and modeled acoustic fields are presented and analyzed in terms of the total ultrasound transmitted through the ceramics. Results indicate a resonant behavior in the alumina disks when the thickness corresponds to a half-wavelength of ultrasound; this resonance permits a total of 95.4% of ultrasound transmission; for thicknesses out of the resonant zone, transmission is 53.0%. Alumina proves to be an excellent medium for ultrasound transmission that, in conjunction with its mechanical and optical properties, can be useful for cranium replacement in mixed opto-acoustic applications.
△ Less
Submitted 19 June, 2024;
originally announced June 2024.
-
Bulk Polycrystalline Ceria Doped Al$_2$O$_3$ and YAG Ceramics for High-Power Density Laser-Driven Solid-State White Lighting: Effects of Crystallinity and Extreme Temperatures
Authors:
E. H. Penilla,
P. Sellappan,
M. A. Duarte,
A. T. Wieg,
M. Wingert,
J. E. Garay
Abstract:
Here we develop and characterize high thermal conductivity/high thermal shock resistant bulk Ce doped Al2O3 and propose it as a new phosphor converting cap** layer for high-powered/high-brightness solid-state white lighting (SSWL). The bulk, dense Ce:Al2O3 ceramics have a 0.5 at.% Ce:Al concentration (significantly higher than the equilibrium solubility limit), and were produced using a simultan…
▽ More
Here we develop and characterize high thermal conductivity/high thermal shock resistant bulk Ce doped Al2O3 and propose it as a new phosphor converting cap** layer for high-powered/high-brightness solid-state white lighting (SSWL). The bulk, dense Ce:Al2O3 ceramics have a 0.5 at.% Ce:Al concentration (significantly higher than the equilibrium solubility limit), and were produced using a simultaneous solid-state reactive Current Activated Pressure-Assisted Densification (CAPAD) approach. Ce:Al2O3 exhibits a broadband emission from 400-600nm, which encompasses the entire blue and green portions of the visible spectrum when pumped with ultra-violet (UV) light that is now commercially available in UV light emitting devices (LED) and laser diodes (LD). These broadband phosphors can be used in the commonly employed scheme of mixing with other UV converting cap** layers that emit red light to produce white light. Alternatively, they can be used in a novel composite down converter approach that ensures improved thermal-mechanical properties of the converting phosphor cap** layer. In this configuration Ce:Al2O3 is used with proven phosphor conversion materials such as Ce:YAG as an active encapsulant or as a cap** layer to produce SSWL with an improved bandwidth in the blue portion of the visible spectrum. In order to study the effect of crystallinity on the Ce PL emission, we synthesize Ce:YAG ceramics using high-pressure CAPAD at moderate temperatures to obtain varying crystallinity (amorphous through fully -crystalline). We investigate the PL characteristics of Ce:Al2O3 and Ce:YAG from 295K to 4K, revealing unique crystal field effects from the matrix on the Ce-dopants. The unique PL properties in conjunction with the superior thermal-mechanical properties of Ce:Al2O3 can be used in high-powered/high-brightness integrated devices based on high-efficiency UV-LD that do not suffer
△ Less
Submitted 22 December, 2019;
originally announced December 2019.
-
Systematic Control of Strain-Induced Perpendicular Magnetic Anisotropy in Epitaxial Europium and Terbium Iron Garnets Thin Films
Authors:
Victor H. Ortiz,
Mohammed Aldosary,
Junxue Li,
Yadong Xu,
Mark I. Lohmann,
Pathikumar Sellappan,
Yasuhiro Kodera,
Javier E. Garay,
**g Shi
Abstract:
We show tunable strain-induced perpendicular magnetic anisotropy (PMA) over a wide range of thicknesses in epitaxial ferrimagnetic insulator Eu3Fe5O12 (EuIG) and Tb3Fe5O12 (TbIG) thin films grown by pulsed-laser deposition on Gd3Ga5O12 with (001) and (111) orientations, respectively. The PMA field is determined by measuring the induced anomalous Hall loops in Pt deposited on the garnet films. Due…
▽ More
We show tunable strain-induced perpendicular magnetic anisotropy (PMA) over a wide range of thicknesses in epitaxial ferrimagnetic insulator Eu3Fe5O12 (EuIG) and Tb3Fe5O12 (TbIG) thin films grown by pulsed-laser deposition on Gd3Ga5O12 with (001) and (111) orientations, respectively. The PMA field is determined by measuring the induced anomalous Hall loops in Pt deposited on the garnet films. Due to positive magnetostriction constants, compressive in-plane strain induces a PMA field as large as 32.9 kOe for 4 nm thick EuIG and 66.7 kOe for 5 nm thick TbIG at 300 K, and relaxes extremely slowly as the garnet film thickness increases. In bilayers consisting of Pt and EuIG or Pt and TbIG, robust PMA is revealed by squared anomalous Hall hysteresis loops in Pt, the magnitude of which appears to be only related to the net magnetic moment of iron sublattices. Furthermore, the magnetostriction constant is found to be 2.7x10^(-5) for EuIG and 1.35x10^(-5) for TbIG, comparable with the values for bulk crystals. Our results demonstrate a general approach of tailoring magnetic anisotropy of rare earth iron garnets by utilizing modulated strain via epitaxial growth.
△ Less
Submitted 30 December, 2018;
originally announced December 2018.
-
Synthesis, processing and transport properties of cubic and trigonal solid solutions in the Mg-Si-Sn system
Authors:
Pathikumar Sellappan,
Anthony Y. Fong,
Masayuki Murata,
Yasuhiro Kodera,
Javier E. Garay
Abstract:
Mg-Si-Sn solid solutions have interesting and useful semiconducting properties particularly for thermoelectric applications. While cubic solid solutions have been prepared by a variety of methods, solid solutions with a trigonal crystal structure have not been reported. We employed a combination of high energy ball milling and current activated pressure assisted densification (CAPAD) to induce and…
▽ More
Mg-Si-Sn solid solutions have interesting and useful semiconducting properties particularly for thermoelectric applications. While cubic solid solutions have been prepared by a variety of methods, solid solutions with a trigonal crystal structure have not been reported. We employed a combination of high energy ball milling and current activated pressure assisted densification (CAPAD) to induce and complete phase transformation from cubic to trigonal phase, forming dense trigonal composites. This is the first successful preparation of the trigonal phase in Mg-Si-Sn stem. In addition, we report the transport properties of both the cubic and trigonal composites measured in the 160 to 400 K range. The electrical conductivity of the trigonal composites was several times higher compared to the cubic counterparts while thermal conductivity is lower but in the range of previously reported Mg-Si-Sn materials. The Seebeck coefficient of the trigonal composites is lower compared to the cubic samples, leading to low ZT values. The ZT of the cubic samples, however is higher than previously reported for un-doped Mg-Si-Sn solid solutions which is promising for thermoelectric applications.
△ Less
Submitted 9 November, 2017;
originally announced November 2017.
-
Anomalous Hall hysteresis in Tm3Fe5O12/Pt with strain-induced perpendicular magnetic anisotropy
Authors:
Chi Tang,
Pathikumar Sellappan,
Yawen Liu,
Yadong Xu,
Javier E. Garay,
**g Shi
Abstract:
We demonstrate robust interface strain-induced perpendicular magnetic anisotropy in atomically flat ferrimagnetic insulator Tm3Fe5O12 films grown with pulsed laser deposition on substituted-Gd3Ga5O12 substrate which maximizes the tensile strain at the interface. In bilayers consisting of Pt and TIG, we observe large squared Hall hysteresis loops over a wide range of thicknesses of Pt at room tempe…
▽ More
We demonstrate robust interface strain-induced perpendicular magnetic anisotropy in atomically flat ferrimagnetic insulator Tm3Fe5O12 films grown with pulsed laser deposition on substituted-Gd3Ga5O12 substrate which maximizes the tensile strain at the interface. In bilayers consisting of Pt and TIG, we observe large squared Hall hysteresis loops over a wide range of thicknesses of Pt at room temperature. When a thin Cu layer is inserted between Pt and TIG, the Hall hysteresis magnitude decays but stays finite as the thickness of Cu increases up to 5 nm. However, if the Cu layer is placed atop Pt instead, the Hall hysteresis magnitude is consistently larger than when the Cu layer with the same thickness is inserted in between for all Cu thicknesses. These results suggest that both the proximity-induced ferromagnetism and spin current contribute to the anomalous Hall effect.
△ Less
Submitted 20 September, 2016;
originally announced September 2016.
-
An integrated approach to doped thin films with strain tunable magnetic anisotropy: Powder synthesis, target preparation and pulsed laser deposition of Bi:YIG
Authors:
Pathikumar Sellappan,
Chi Tang,
**g Shi,
Javier E. Garay
Abstract:
We present a synthesis/processing method for fabricating ferrimagnetic insulator (Bi-doped yttrium iron garnet) thin films with tunable magnetic anisotropy. Since the desired magnetic properties rely on controllable thickness and successful do**, we pay attention to the entire synthesis/processing procedure (nanopowder synthesis, nanocrystalline target preparation and pulsed laser deposition (PL…
▽ More
We present a synthesis/processing method for fabricating ferrimagnetic insulator (Bi-doped yttrium iron garnet) thin films with tunable magnetic anisotropy. Since the desired magnetic properties rely on controllable thickness and successful do**, we pay attention to the entire synthesis/processing procedure (nanopowder synthesis, nanocrystalline target preparation and pulsed laser deposition (PLD)). Atomically flat films were deposited by PLD on (111)-orientated yttrium aluminum garnet. We show a significant enhancement of perpendicular anisotropy in the films, caused by strain-induced anisotropy. In addition, the perpendicular anisotropy is tunable by decreasing the film thickness and overwhelms the shape anisotropy at a critical thickness of 3.5 nm.
△ Less
Submitted 14 July, 2016; v1 submitted 29 May, 2016;
originally announced May 2016.
-
Wave propagation through alumina-porous alumina laminates
Authors:
Pathikumar Sellappan,
Erheng Wang,
Christian J. Espinoza Santos,
Tommy On,
John Lambros,
Waltraud M. Kriven
Abstract:
A Brazilian disk geometry of an alumina layered composite with alternating dense and porous layers was dynamically loaded using a Split-Hopkinson Pressure Bar (SHPB)apparatus under compression. High-speed imaging and transmitted force measurements were used to gain an insight into stress wave propagation and mitigation through such a layered system. Uniformly distributed porosities of 20 and 50 vo…
▽ More
A Brazilian disk geometry of an alumina layered composite with alternating dense and porous layers was dynamically loaded using a Split-Hopkinson Pressure Bar (SHPB)apparatus under compression. High-speed imaging and transmitted force measurements were used to gain an insight into stress wave propagation and mitigation through such a layered system. Uniformly distributed porosities of 20 and 50 vol % were introduced into the interlayers by the addition of fine graphite particles which volatilized during heat treatment. Brazilian disk samples were cut from the cylinders which were drilled out of the sintered laminated sample. The disks were subjected to dynamic impact loading in perpendicular and parallel orientations to the layers in order to investigate the influence of the direction of impact. The dynamic failure process of the layered ceramic consisted of the initiation and propagation of the cracks mainly along the interphases of the layers. Upon impact, the impact energy was dissipated through fracture in parallel orientation (0 deg) but transmitted in perpendicular (90 deg) orientations. The high degree of correlation between the transmitted force, microstructure and orientation in which the layered systems were impacted is discussed.
△ Less
Submitted 18 August, 2014;
originally announced August 2014.
-
Predicting Failure: Acoustic Emission of Berlinite under Compression
Authors:
Guillaume F Nataf,
Pedro O Castillo-Villa,
Pathikumar Sellappan,
Waltraud M Kriven,
Eduard Vives,
Antoni Planes,
Ekhard K H Salje
Abstract:
Acoustic emission has been measured and statistical characteristics have been analyzed during the stress-induced collapse of porous berlinite, AlPO4, containing up to 50 vol% porosity. Stress collapse occurs in a series of individual events (avalanches), and each avalanche leads to a jerk in sample compression with corresponding acoustic emission (AE) signals. The distribution of AE avalanche ener…
▽ More
Acoustic emission has been measured and statistical characteristics have been analyzed during the stress-induced collapse of porous berlinite, AlPO4, containing up to 50 vol% porosity. Stress collapse occurs in a series of individual events (avalanches), and each avalanche leads to a jerk in sample compression with corresponding acoustic emission (AE) signals. The distribution of AE avalanche energies can be approximately described by a power law over a large stress interval. We observed several collapse mechanisms whereby less porous minerals show the superposition of independent jerks, which were not related to the major collapse at the failure stress. In highly porous berlinite (40% and 50%) an increase of the energy emission occurred near the failure point. In contrast, the less porous samples did not show such an increase in energy emission. Instead, in the near vicinity of the main failure point they showed a reduction in the energy exponent to ~ 1.4, which is consistent with the value reported for compressed porous systems displaying critical behavior. This indicated that a critical avalanche regime with a lack of precursor events occurs. In this case, all preceding large events were false alarms and unrelated to the main failure event. Our results identify a method to use pico-seismicity detection of foreshocks to warn of mine collapse before the main failure collapse occurs, which can be applied for highly porous materials only.
△ Less
Submitted 8 May, 2014;
originally announced May 2014.
-
Crackling noise during failure of alumina under compression: effect of porosity
Authors:
Pedro O Castillo-Villa,
Jordi Baró,
Antoni Planes,
Ekhard K H Salje,
Pathikumar Sellappan,
Waltraud M Kriven,
Eduard Vives
Abstract:
We study the acoustic emission avalanches during the failure process of porous alumina samples (Al2O3) under compression. Specimens with different porosities ranging from 30% to 59% have been synthetized from a mixture of fine-grained alumina and graphite. The compressive strength as well as the characteristics of the acoustic activity have been determined. The statistical analysis of the recorded…
▽ More
We study the acoustic emission avalanches during the failure process of porous alumina samples (Al2O3) under compression. Specimens with different porosities ranging from 30% to 59% have been synthetized from a mixture of fine-grained alumina and graphite. The compressive strength as well as the characteristics of the acoustic activity have been determined. The statistical analysis of the recorded acoustic emission pulses reveals, for all porosities, a broad distribution of energies with a fat tail, compatible with the existence of an underlying critical point. In the region of 35%-55% porosity, the energy distributions of the acoustic emission signals are compatible with a power law behavior over two decades in energy with an exponent ε= 1.8+/-0.1.
△ Less
Submitted 14 May, 2013;
originally announced May 2013.
