-
Multi-mode Heterodyne Laser Interferometry Realized via Software Defined Radio
Authors:
X. Lin,
M. T. Hartman,
S. Zhang,
S. Seidelin,
B. Fang,
Y. Le Coq
Abstract:
The agile generation and control of multiple optical frequency modes combined with the realtime processing of multi-mode data provides access to experimentation in domains such as optomechanical systems, optical information processing, and multi-mode spectroscopy. The latter, specifically spectroscopy of spectral-hole burning (SHB), has motivated our development of a multi-mode heterodyne laser in…
▽ More
The agile generation and control of multiple optical frequency modes combined with the realtime processing of multi-mode data provides access to experimentation in domains such as optomechanical systems, optical information processing, and multi-mode spectroscopy. The latter, specifically spectroscopy of spectral-hole burning (SHB), has motivated our development of a multi-mode heterodyne laser interferometric scheme centered around a software-defined radio platform for signal generation and processing, with development in an entirely open-source environment. A challenge to SHB is the high level of shot noise due to the laser power constraint imposed by the spectroscopic sample. Here, we have demonstrated the production, detection, and separation of multiple optical frequency modes to the benefit of optical environment sensing for realtime phase noise subtraction as well as shot noise reduction through multi-mode averaging. This has allowed us to achieve improved noise performance in low-optical-power interferometry. Although our target application is laser stabilization via SHB in cryogenic temperature rare-earth doped crystals, these techniques may be employed in a variety of different contexts.
△ Less
Submitted 5 October, 2023;
originally announced October 2023.
-
Precision measurements of electric-field-induced frequency displacements of an ultranarrow optical transition in ions in a solid
Authors:
S. Zhang,
N. Lučić,
N. Galland,
R. Le Targat,
P. Goldner,
B. Fang,
S. Seidelin,
Y. Le Coq
Abstract:
We report a series of measurements of the effect of an electric field on the frequency of the ultranarrow linewidth $^7F_0 \rightarrow$ $^5D_0$ optical transition of $\rm Eu^{3+}$ ions in an $\rm Y_2SiO_5$ matrix at cryogenic temperatures. We provide linear Stark coefficients along two dielectric axes and for the two different substitution sites of the $\rm Eu^{3+}$ ions, with an unprecedented acc…
▽ More
We report a series of measurements of the effect of an electric field on the frequency of the ultranarrow linewidth $^7F_0 \rightarrow$ $^5D_0$ optical transition of $\rm Eu^{3+}$ ions in an $\rm Y_2SiO_5$ matrix at cryogenic temperatures. We provide linear Stark coefficients along two dielectric axes and for the two different substitution sites of the $\rm Eu^{3+}$ ions, with an unprecedented accuracy, and an upper limit for the quadratic Stark shift. The measurements, which indicate that the electric field sensitivity is a factor of seven larger for site 1 relative to site 2 for a particular direction of the electric field are of direct interest both in the context of quantum information processing and laser frequency stabilization with rare-earth doped crystals, in which electric fields can be used to engineer experimental protocols by tuning transition frequencies.
△ Less
Submitted 26 January, 2021; v1 submitted 25 January, 2021;
originally announced January 2021.
-
Inhomogeneous response of an ion ensemble from mechanical stress
Authors:
S. Zhang,
N. Galland,
N. Lučić,
R. Le Targat,
A. Ferrier,
P. Goldner,
B. Fang,
Y. Le Coq,
S. Seidelin
Abstract:
Material strain has recently received growing attention as a complementary resource to control the energy levels of quantum emitters embedded inside a solid-state environment. Some rare-earth ion dopants provide an optical transition which simultaneously has a narrow linewidth and is highly sensitive to strain. In such systems, the technique of spectral hole burning, in which a transparent window…
▽ More
Material strain has recently received growing attention as a complementary resource to control the energy levels of quantum emitters embedded inside a solid-state environment. Some rare-earth ion dopants provide an optical transition which simultaneously has a narrow linewidth and is highly sensitive to strain. In such systems, the technique of spectral hole burning, in which a transparent window is burnt within the large inhomogeneous profile, allows to benefit from the narrow features, which are also sensitive to strain, while working with large ensembles of ions. However, working with ensembles may give rise to inhomogeneous responses among different ions. We investigate experimentally how the shape of a narrow spectral hole is modified due to external mechanical strain, in particular, the hole broadening as a function of the geometry of the crystal sites and the crystalline axis along which the stress is applied. Studying these effects are essential in order to optimize the existing applications of rare-earth doped crystals in fields which already profit from the more well-established coherence properties of these dopants such as frequency metrology and quantum information processing, or even suggest novel applications of these materials, for example as robust devices for force-sensing or highly sensitive accelerometers.
△ Less
Submitted 10 April, 2020;
originally announced April 2020.
-
Microscale crystalline rare-earth doped resonators for strain-coupled optomechanics
Authors:
J. F. Motte,
N. Galland,
J. Debray,
A. Ferrier,
P. Goldner,
N. Lučić,
S. Zhang,
B. Fang,
Y. Le Coq,
S. Seidelin
Abstract:
Rare-earth ion doped crystals for hybrid quantum technologies is an area of growing interest in the solid-state physics community. We have earlier theoretically proposed a hybrid scheme of a mechanical resonator which is fabricated out of a rare-earth doped mono-crystalline structure. The rare-earth ion dopants have absorption energies which are sensitive to crystal strain, and it is thus possible…
▽ More
Rare-earth ion doped crystals for hybrid quantum technologies is an area of growing interest in the solid-state physics community. We have earlier theoretically proposed a hybrid scheme of a mechanical resonator which is fabricated out of a rare-earth doped mono-crystalline structure. The rare-earth ion dopants have absorption energies which are sensitive to crystal strain, and it is thus possible to couple the ions to the bending motion of the crystal cantilever. Here, we present the design and fabrication method based on focused-ion-beam etching techniques which we have successfully employed in order to create such microscale resonators, as well as the design of the environment which will allow to study the quantum behavior of the resonators.
△ Less
Submitted 9 April, 2020; v1 submitted 7 April, 2020;
originally announced April 2020.
-
Position- and momentum-squeezed quantum states in micro-scale mechanical resonators
Authors:
Y. Le Coq,
K. Mølmer,
S. Seidelin
Abstract:
A challenge of modern physics is to investigate the quantum behavior of a bulk material object, for instance a mechanical oscillator. We have earlier demonstrated that by coupling a mechanical oscillator to the energy levels of embedded rare-earth ion dopants, it is possible to prepare such a resonator in a low phonon number state. Here, we describe how to extend this protocol in order to prepare…
▽ More
A challenge of modern physics is to investigate the quantum behavior of a bulk material object, for instance a mechanical oscillator. We have earlier demonstrated that by coupling a mechanical oscillator to the energy levels of embedded rare-earth ion dopants, it is possible to prepare such a resonator in a low phonon number state. Here, we describe how to extend this protocol in order to prepare momentum- and position squeezed states, and we analyze how the obtainable degree of squeezing depends on the initial conditions and on the coupling of the oscillator to its thermal environment.
△ Less
Submitted 7 April, 2020;
originally announced April 2020.
-
Double-heterodyne probing for ultra-stable laser based on spectral hole burning in a rare-earth doped crystal
Authors:
N. Galland,
N. Lucic,
S. Zhang,
H. Alvarez-Martinez,
R. Le Targat,
A. Ferrier,
P. Goldner,
B. Fang,
S. Seidelin,
Y. Le Coq
Abstract:
We present an experimental technique for realizing a specific absorption spectral pattern in a rare-earth-doped crystal at cryogenic temperatures. This pattern is subsequently probed on two spectral channels simultaneously, thereby producing an error signal allowing frequency locking of a laser on the said spectral pattern. Appropriate combination of the two channels leads to a substantial reducti…
▽ More
We present an experimental technique for realizing a specific absorption spectral pattern in a rare-earth-doped crystal at cryogenic temperatures. This pattern is subsequently probed on two spectral channels simultaneously, thereby producing an error signal allowing frequency locking of a laser on the said spectral pattern. Appropriate combination of the two channels leads to a substantial reduction of the detection noise, paving the way to realizing an ultra-stable laser for which the detection noise can be made arbitrarily low when using multiple channels. We use such technique to realize a laser with a frequency instability of $1.7\times 10^{-15}$ at 1 second, not limited by the detection noise but by environmental perturbation of the crystal. This is comparable with the lowest instability demonstrated at 1 second to date for rare-earth doped crystal stabilized lasers.
△ Less
Submitted 3 April, 2020;
originally announced April 2020.
-
Mechanical tunability of an ultra-narrow spectral feature with uniaxial stress
Authors:
N. Galland,
N. Lucic,
B. Fang,
S. Zhang,
R. Letargat,
A. Ferrier,
P. Goldner,
S. Seidelin,
Y. Le Coq
Abstract:
Rare-earth doped crystals have numerous applications ranging from frequency metrology to quantum information processing. To fully benefit from their exceptional coherence properties, the effect of mechanical strain on the energy levels of the dopants - whether it is a resource or perturbation - needs to be considered. We demonstrate that by applying uniaxial stress to a rare-earth doped crystal co…
▽ More
Rare-earth doped crystals have numerous applications ranging from frequency metrology to quantum information processing. To fully benefit from their exceptional coherence properties, the effect of mechanical strain on the energy levels of the dopants - whether it is a resource or perturbation - needs to be considered. We demonstrate that by applying uniaxial stress to a rare-earth doped crystal containing a spectral hole, we can shift the hole by a controlled amount that is larger than the width of the hole. We deduce the sensitivity of $\rm Eu^{3+}$ ions in an $\rm Y_2SiO_5$ matrix as a function of crystal site and the crystalline axis along which the stress is applied.
△ Less
Submitted 18 December, 2019;
originally announced December 2019.
-
Rapid cooling of a strain-coupled oscillator by optical phaseshift measurement
Authors:
Signe Seidelin,
Yann Le Coq,
Klaus Mølmer
Abstract:
We consider an optical probe that interacts with an ensemble of rare earth ions do** a materialin the shape of a cantilever. By optical spectral hole burning, the inhomogeneously broadenedtransition in the ions is prepared to transmit the probe field within a narrow window, but bendingof the cantilever causes strain in the material which shifts the ion resonances. The motion of thecantilever may…
▽ More
We consider an optical probe that interacts with an ensemble of rare earth ions do** a materialin the shape of a cantilever. By optical spectral hole burning, the inhomogeneously broadenedtransition in the ions is prepared to transmit the probe field within a narrow window, but bendingof the cantilever causes strain in the material which shifts the ion resonances. The motion of thecantilever may thus be registered by the phase shift of the probe. By continuously measuringthe optical field we induce a rapid reduction of the position and momentum uncertainty of thecantilever. Doing so, the probing extracts entropy and thus effectively cools the thermal state ofmotion towards a known, conditional oscillatory motion with strongly reduced thermal fluctuations.Moreover, as the optical probe provides a force on the resonator proportional to its intensity, it ispossible to exploit the phase shift measurements in order to create an active feedback loop, whicheliminates the thermal fluctuations of the resonator. We describe this system theoretically, andprovide numerical simulations which demonstrate the rapid reduction in resonator position andmomentum uncertainty, as well as the implementation of the active cooling protocol.
△ Less
Submitted 10 May, 2019;
originally announced May 2019.
-
Dispersive coupling between light and a rare-earth ion doped mechanical resonator
Authors:
Klaus Mølmer,
Yann Le Coq,
Signe Seidelin
Abstract:
By spectrally hole burning an inhomogeneously broadened ensemble of ions while applying a controlled perturbation, one can obtain spectral holes that are functionalized for maximum sensitivity to different perturbations. We propose to use such hole burnt structures for the dispersive optical interaction with rare-earth ion dopants whose frequencies are sensitive to crystal strain due to the bendin…
▽ More
By spectrally hole burning an inhomogeneously broadened ensemble of ions while applying a controlled perturbation, one can obtain spectral holes that are functionalized for maximum sensitivity to different perturbations. We propose to use such hole burnt structures for the dispersive optical interaction with rare-earth ion dopants whose frequencies are sensitive to crystal strain due to the bending motion of a crystal cantilever. A quantitative analysis shows that good optical sensitivity to the bending motion is obtained if a magnetic field gradient is applied across the crystal during hole burning, and that the resulting opto-mechanical coupling strength is sufficient for observing quantum features such as zero point vibrations.
△ Less
Submitted 17 December, 2016; v1 submitted 2 August, 2016;
originally announced August 2016.
-
Strain-mediated coupling in a quantum dot-mechanical oscillator hybrid system
Authors:
Inah Yeo,
Pierre-Louis de Assis,
Arnaud Gloppe,
Eva Dupont-Ferrier,
Pierre Verlot,
Nitin S. Malik,
Emmanuel Dupuy,
Julien Claudon,
Jean-Michel Gérard,
Alexia Auffèves,
Gilles Nogues,
Signes Seidelin,
Jean-Philippe Poizat,
Olivier Arcizet,
Maxime Richard
Abstract:
Recent progress in nanotechnology has allowed to fabricate new hybrid systems where a single two-level system is coupled to a mechanical nanoresonator. In such systems the quantum nature of a macroscopic degree of freedom can be revealed and manipulated. This opens up appealing perspectives for quantum information technologies, and for the exploration of quantum-classical boundary. Here we present…
▽ More
Recent progress in nanotechnology has allowed to fabricate new hybrid systems where a single two-level system is coupled to a mechanical nanoresonator. In such systems the quantum nature of a macroscopic degree of freedom can be revealed and manipulated. This opens up appealing perspectives for quantum information technologies, and for the exploration of quantum-classical boundary. Here we present the experimental realization of a monolithic solid-state hybrid system governed by material strain: a quantum dot is embedded within a nanowire featuring discrete mechanical resonances corresponding to flexural vibration modes. Mechanical vibrations result in a time-varying strain field that modulates the quantum dot transition energy. This approach simultaneously offers a large light extraction efficiency and a large exciton-phonon coupling strength $g_0$. By means of optical and mechanical spectroscopy, we find that $g_0/2π$ is nearly as large as the mechanical frequency, a criterion which defines the ultra-strong coupling regime.
△ Less
Submitted 18 June, 2013;
originally announced June 2013.
-
Surface effects in a semiconductor photonic nanowire and spectral stability of an embedded single quantum dot
Authors:
Inah Yeo,
Nitin S. Malik,
Mathieu Munsch,
Emmanuel Dupuy,
Joël Bleuse,
Yann-Michel Niquet,
Jean-Michel Gérard,
Julien Claudon,
Édouard Wagner,
Signe Seidelin,
Alexia Auffèves,
Jean-Philippe Poizat,
Gilles Nogues
Abstract:
We evidence the influence of surface effects for InAs quantum dots embedded into GaAs photonic nanowires used as efficient single photon sources. We observe a continuous temporal drift of the emission energy that is an obstacle to resonant quantum optics experiments at the single photon level. We attribute the drift to the sticking of oxygen molecules onto the wire, which modifies the surface char…
▽ More
We evidence the influence of surface effects for InAs quantum dots embedded into GaAs photonic nanowires used as efficient single photon sources. We observe a continuous temporal drift of the emission energy that is an obstacle to resonant quantum optics experiments at the single photon level. We attribute the drift to the sticking of oxygen molecules onto the wire, which modifies the surface charge and hence the electric field seen by the quantum dot. The influence of temperature and excitation laser power on this phenomenon is studied. Most importantly, we demonstrate a proper treatment of the nanowire surface to suppress the drift.
△ Less
Submitted 16 December, 2011;
originally announced December 2011.
-
A single NV defect coupled to a nanomechanical oscillator
Authors:
Olivier Arcizet,
Vincent Jacques,
Alessandro Siria,
Philippe Poncharal,
Pascal Vincent,
Signe Seidelin
Abstract:
A single Nitrogen Vacancy (NV) center hosted in a diamond nanocrystal is positioned at the extremity of a SiC nanowire. This novel hybrid system couples the degrees of freedom of two radically different systems, i.e. a nanomechanical oscillator and a single quantum object. The dynamics of the nano-resonator is probed through time resolved nanocrystal fluorescence and photon correlation measurement…
▽ More
A single Nitrogen Vacancy (NV) center hosted in a diamond nanocrystal is positioned at the extremity of a SiC nanowire. This novel hybrid system couples the degrees of freedom of two radically different systems, i.e. a nanomechanical oscillator and a single quantum object. The dynamics of the nano-resonator is probed through time resolved nanocrystal fluorescence and photon correlation measurements, conveying the influence of a mechanical degree of freedom given to a non-classical photon emitter. Moreover, by immersing the system in a strong magnetic field gradient, we induce a magnetic coupling between the nanomechanical oscillator and the NV electronic spin, providing nanomotion readout through a single electronic spin. Spin-dependent forces inherent to this coupling scheme are essential in a variety of active cooling and entanglement protocols used in atomic physics, and should now be within the reach of nanomechanical hybrid systems.
△ Less
Submitted 6 December, 2011;
originally announced December 2011.
-
Amplitude to phase conversion of InGaAs pin photo-diodes for femtosecond lasers microwave signal generation
Authors:
W. Zhang,
T. Li,
M. Lours,
S. Seidelin,
G. Santarelli,
Y. Le Coq
Abstract:
When a photo-diode is illuminated by a pulse train from a femtosecond laser, it generates microwaves components at the harmonics of the repetition rate within its bandwidth. The phase of these components (relative to the optical pulse train) is known to be dependent on the optical energy per pulse. We present an experimental study of this dependence in InGaAs pin photo-diodes illuminated with ultr…
▽ More
When a photo-diode is illuminated by a pulse train from a femtosecond laser, it generates microwaves components at the harmonics of the repetition rate within its bandwidth. The phase of these components (relative to the optical pulse train) is known to be dependent on the optical energy per pulse. We present an experimental study of this dependence in InGaAs pin photo-diodes illuminated with ultra-short pulses generated by an Erbium-doped fiber based femtosecond laser. The energy to phase dependence is measured over a large range of im**ing pulse energies near and above saturation for two typical detectors, commonly used in optical frequency metrology with femtosecond laser based optical frequency combs. When scanning the optical pulse energy, the coefficient which relates phase variations to energy variations is found to alternate between positive and negative values, with many (for high harmonics of the repetition rate) vanishing points. By operating the system near one of these vanishing points, the typical amplitude noise level of commercial-core fiber-based femtosecond lasers is sufficiently low to generate state-of-the-art ultra-low phase noise microwave signals, virtually immune to amplitude to phase conversion related noise.
△ Less
Submitted 22 April, 2011;
originally announced April 2011.
-
Scalable ion traps for quantum information processing
Authors:
J. M. Amini,
H. Uys,
J. H. Wesenberg,
S. Seidelin,
J. Britton,
J. J. Bollinger,
D. Leibfried,
C. Ospelkaus,
A. P. VanDevender,
D. J. Wineland
Abstract:
We report on the design, fabrication, and preliminary testing of a 150 zone array built in a `surface-electrode' geometry microfabricated on a single substrate. We demonstrate transport of atomic ions between legs of a `Y'-type junction and measure the in-situ heating rates for the ions. The trap design demonstrates use of a basic component design library that can be quickly assembled to form st…
▽ More
We report on the design, fabrication, and preliminary testing of a 150 zone array built in a `surface-electrode' geometry microfabricated on a single substrate. We demonstrate transport of atomic ions between legs of a `Y'-type junction and measure the in-situ heating rates for the ions. The trap design demonstrates use of a basic component design library that can be quickly assembled to form structures optimized for a particular experiment.
△ Less
Submitted 13 September, 2009;
originally announced September 2009.
-
Continuous-wave versus time-resolved measurements of Purcell-factors for quantum dots in semiconductor microcavities
Authors:
M. Munsch,
A. Mosset,
A. Auffèves,
Signe Seidelin,
J. P. Poizat,
J. -M. Gérard,
A. Lemaître,
I. Sagnes,
P. Senellart
Abstract:
The light emission rate of a single quantum dot can be drastically enhanced by embedding it in a resonant semiconductor microcavity. This phenomenon is known as the Purcell effect, and the coupling strength between emitter and cavity can be quantified by the Purcell factor. The most natural way for probing the Purcell effect is a time-resolved measurement. However, this approach is not always th…
▽ More
The light emission rate of a single quantum dot can be drastically enhanced by embedding it in a resonant semiconductor microcavity. This phenomenon is known as the Purcell effect, and the coupling strength between emitter and cavity can be quantified by the Purcell factor. The most natural way for probing the Purcell effect is a time-resolved measurement. However, this approach is not always the most convenient one, and alternative approaches based on a continuous-wave measurement are often more appropriate. Various signatures of the Purcell effect can indeed be observed using continuous-wave measurements (increase of the pump rate needed to saturate the quantum dot emission, enhancement of its emission rate at saturation, change of its radiation pattern), signatures which are encountered when a quantum dot is put on-resonance with the cavity mode. All these observations potentially allow one to estimate the Purcell factor. In this paper, we carry out these different types of measurements for a single quantum dot in a pillar microcavity and we compare their reliability. We include in the data analysis the presence of independent, non-resonant emitters in the microcavity environment, which are responsible for a part of the observed fluorescence.
△ Less
Submitted 3 June, 2009;
originally announced June 2009.
-
Simplified motional heating rate measurements of trapped ions
Authors:
R. J. Epstein,
S. Seidelin,
D. Leibfried,
J. H. Wesenberg,
J. J. Bollinger,
J. M. Amini,
R. B. Blakestad,
J. Britton,
J. P. Home,
W. M. Itano,
J. D. Jost,
E. Knill,
C. Langer,
R. Ozeri,
N. Shiga,
D. J. Wineland
Abstract:
We have measured motional heating rates of trapped atomic ions, a factor that can influence multi-ion quantum logic gate fidelities. Two simplified techniques were developed for this purpose: one relies on Raman sideband detection implemented with a single laser source, while the second is even simpler and is based on time-resolved fluorescence detection during Doppler recooling. We applied thes…
▽ More
We have measured motional heating rates of trapped atomic ions, a factor that can influence multi-ion quantum logic gate fidelities. Two simplified techniques were developed for this purpose: one relies on Raman sideband detection implemented with a single laser source, while the second is even simpler and is based on time-resolved fluorescence detection during Doppler recooling. We applied these methods to determine heating rates in a microfrabricated surface-electrode trap made of gold on fused quartz, which traps ions 40 microns above its surface. Heating rates obtained from the two techniques were found to be in reasonable agreement. In addition, the trap gives rise to a heating rate of 300 plus or minus 30 per second for a motional frequency of 5.25 MHz, substantially below the trend observed in other traps.
△ Less
Submitted 10 July, 2007;
originally announced July 2007.
-
Fluorescence during Doppler cooling of a single trapped atom
Authors:
J. H. Wesenberg,
R. J. Epstein,
D. Leibfried,
R. B. Blakestad,
J. Britton,
J. P. Home,
W. M. Itano,
J. D. Jost,
E. Knill,
C. Langer,
R. Ozeri,
S. Seidelin,
D. J. Wineland
Abstract:
We investigate the temporal dynamics of Doppler cooling of an initially hot single trapped atom in the weak binding regime using a semiclassical approach. We develop an analytical model for the simplest case of a single vibrational mode for a harmonic trap, and show how this model allows us to estimate the initial energy of the trapped particle by observing the fluorescence rate during the cooli…
▽ More
We investigate the temporal dynamics of Doppler cooling of an initially hot single trapped atom in the weak binding regime using a semiclassical approach. We develop an analytical model for the simplest case of a single vibrational mode for a harmonic trap, and show how this model allows us to estimate the initial energy of the trapped particle by observing the fluorescence rate during the cooling process. The experimental implementation of this temperature measurement provides a way to measure atom heating rates by observing the temperature rise in the absence of cooling. This method is technically relatively simple compared to conventional sideband detection methods, and the two methods are in reasonable agreement. We also discuss the effects of RF micromotion, relevant for a trapped atomic ion, and the effect of coupling between the vibrational modes on the cooling dynamics.
△ Less
Submitted 9 July, 2007; v1 submitted 9 July, 2007;
originally announced July 2007.
-
Randomized Benchmarking of Quantum Gates
Authors:
E. Knill,
D. Leibfried,
R. Reichle,
J. Britton,
R. B. Blakestad,
J. D. Jost,
C. Langer,
R. Ozeri,
S. Seidelin,
D. J. Wineland
Abstract:
A key requirement for scalable quantum computing is that elementary quantum gates can be implemented with sufficiently low error. One method for determining the error behavior of a gate implementation is to perform process tomography. However, standard process tomography is limited by errors in state preparation, measurement and one-qubit gates. It suffers from inefficient scaling with number of…
▽ More
A key requirement for scalable quantum computing is that elementary quantum gates can be implemented with sufficiently low error. One method for determining the error behavior of a gate implementation is to perform process tomography. However, standard process tomography is limited by errors in state preparation, measurement and one-qubit gates. It suffers from inefficient scaling with number of qubits and does not detect adverse error-compounding when gates are composed in long sequences. An additional problem is due to the fact that desirable error probabilities for scalable quantum computing are of the order of 0.0001 or lower. Experimentally proving such low errors is challenging. We describe a randomized benchmarking method that yields estimates of the computationally relevant errors without relying on accurate state preparation and measurement. Since it involves long sequences of randomly chosen gates, it also verifies that error behavior is stable when used in long computations. We implemented randomized benchmarking on trapped atomic ion qubits, establishing a one-qubit error probability per randomized pi/2 pulse of 0.00482(17) in a particular experiment. We expect this error probability to be readily improved with straightforward technical modifications.
△ Less
Submitted 6 July, 2007;
originally announced July 2007.
-
Errors in trapped-ion quantum gates due to spontaneous photon scattering
Authors:
R. Ozeri,
W. M. Itano,
R. B. Blakestad,
J. Britton,
J. Chiaverini,
J. D. Jost,
C. Langer,
D. Leibfried,
R. Reichle,
S. Seidelin,
J. H. Wesenberg,
D. J. Wineland
Abstract:
We analyze the error in trapped-ion, hyperfine qubit, quantum gates due to spontaneous scattering of photons from the gate laser beams. We investigate single-qubit rotations that are based on stimulated Raman transitions and two-qubit entangling phase-gates that are based on spin-dependent optical dipole forces. This error is compared between different ion species currently being investigated as…
▽ More
We analyze the error in trapped-ion, hyperfine qubit, quantum gates due to spontaneous scattering of photons from the gate laser beams. We investigate single-qubit rotations that are based on stimulated Raman transitions and two-qubit entangling phase-gates that are based on spin-dependent optical dipole forces. This error is compared between different ion species currently being investigated as possible quantum information carriers. For both gate types we show that with realistic laser powers the scattering error can be reduced to below current estimates of the fault-tolerance error threshold.
△ Less
Submitted 30 January, 2007; v1 submitted 3 November, 2006;
originally announced November 2006.
-
Transport dynamics of single ions in segmented microstructured Paul trap arrays
Authors:
R. Reichle,
D. Leibfried,
R. B. Blakestad,
J. Britton,
J. D. Jost,
E. Knill,
C. Langer,
R. Ozeri,
S. Seidelin,
D. J. Wineland
Abstract:
It was recently proposed to use small groups of trapped ions as qubit carriers in miniaturized electrode arrays that comprise a large number of individual trap** zones, between which ions could be moved. This approach might be scalable for quantum information processing with a large numbers of qubits. Processing of quantum information is achieved by transporting ions to and from separate memor…
▽ More
It was recently proposed to use small groups of trapped ions as qubit carriers in miniaturized electrode arrays that comprise a large number of individual trap** zones, between which ions could be moved. This approach might be scalable for quantum information processing with a large numbers of qubits. Processing of quantum information is achieved by transporting ions to and from separate memory and qubit manipulation zones in between quantum logic operations. The transport of ion groups in this scheme plays a major role and requires precise experimental control and fast transport. In this paper we introduce a theoretical framework to study ion transport in external potentials that might be created by typical miniaturized Paul trap electrode arrays. In particular we discuss the relationship between classical and quantum descriptions of the transport and study the energy transfer to the oscillatory motion during near-adiabatic transport. Based on our findings we suggest a numerical method to find electrode potentials as a function of time to optimize the local potential an ion experiences during transport. We demonstrate this method for one specific electrode geometry that should closely represent the situation encountered in realistic trap arrays.
△ Less
Submitted 28 June, 2006;
originally announced June 2006.
-
Cantilever cooling with radio frequency circuits
Authors:
D. J. Wineland,
J. Britton,
R. J. Epstein,
D. Leibfried,
R. B. Blakestad,
K. Brown,
J. D. Jost,
C. Langer,
R. Ozeri,
S. Seidelin,
J. Wesenberg
Abstract:
We consider a method to reduce the kinetic energy in a low-order mode of a miniature cantilever. If the cantilever contributes to the capacitance of a driven RF circuit, a force on the cantilever exists due to the electric field energy stored in the capacitance. If this force acts with an appropriate phase shift relative to the motion of the cantilever, it can oppose the velocity of the cantilev…
▽ More
We consider a method to reduce the kinetic energy in a low-order mode of a miniature cantilever. If the cantilever contributes to the capacitance of a driven RF circuit, a force on the cantilever exists due to the electric field energy stored in the capacitance. If this force acts with an appropriate phase shift relative to the motion of the cantilever, it can oppose the velocity of the cantilever, leading to cooling. Such cooling may enable reaching the quantum regime of cantilever motion.
△ Less
Submitted 21 June, 2006;
originally announced June 2006.
-
A microfabricated surface-electrode ion trap in silicon
Authors:
J. Britton,
D. Leibfried,
J. Beall,
R. B. Blakestad,
J. J. Bollinger,
J. Chiaverini,
R. J. Epstein,
J. D. Jost,
D. Kielpinski,
C. Langer,
R. Ozeri,
R. Reichle,
S. Seidelin,
N. Shiga,
J. H. Wesenberg,
D. J. Wineland
Abstract:
The prospect of building a quantum information processor underlies many recent advances ion trap fabrication techniques. Potentially, a quantum computer could be constructed from a large array of interconnected ion traps. We report on a micrometer-scale ion trap, fabricated from bulk silicon using micro-electromechanical systems (MEMS) techniques. The trap geometry is relatively simple in that t…
▽ More
The prospect of building a quantum information processor underlies many recent advances ion trap fabrication techniques. Potentially, a quantum computer could be constructed from a large array of interconnected ion traps. We report on a micrometer-scale ion trap, fabricated from bulk silicon using micro-electromechanical systems (MEMS) techniques. The trap geometry is relatively simple in that the electrodes lie in a single plane beneath the ions. In such a trap we confine laser-cooled 24Mg+ ions approximately 40 microns above the surface. The fabrication technique and planar electrode geometry together make this approach amenable to scaling up to large trap arrays. In addition we observe that little laser cooling light is scattered by the electrodes.
△ Less
Submitted 19 May, 2006;
originally announced May 2006.
-
A microfabricated surface-electrode ion trap for scalable quantum information processing
Authors:
S. Seidelin,
J. Chiaverini,
R. Reichle,
J. J. Bollinger,
D. Leibfried,
J. Britton,
J. H. Wesenberg,
R. B. Blakestad,
R. J. Epstein,
D. B. Hume,
J. D. Jost,
C. Langer,
R. Ozeri,
N. Shiga,
D. J. Wineland
Abstract:
We demonstrate confinement of individual atomic ions in a radio-frequency Paul trap with a novel geometry where the electrodes are located in a single plane and the ions confined above this plane. This device is realized with a relatively simple fabrication procedure and has important implications for quantum state manipulation and quantum information processing using large numbers of ions. We c…
▽ More
We demonstrate confinement of individual atomic ions in a radio-frequency Paul trap with a novel geometry where the electrodes are located in a single plane and the ions confined above this plane. This device is realized with a relatively simple fabrication procedure and has important implications for quantum state manipulation and quantum information processing using large numbers of ions. We confine laser-cooled Mg-24 ions approximately 40 micrometer above planar gold electrodes. We measure the ions' motional frequencies and compare them to simulations. From measurements of the escape time of ions from the trap, we also determine a heating rate of approximately five motional quanta per millisecond for a trap frequency of 5.3 MHz.
△ Less
Submitted 25 January, 2006;
originally announced January 2006.
-
Quantum control, quantum information processing, and quantum-limited metrology with trapped ions
Authors:
D. J. Wineland,
D. Leibfried,
M. D. Barrett,
A. Ben-Kish,
J. C. Bergquist,
R. B. Blakestad,
J. J. Bollinger,
J. Britton,
J. Chiaverini,
B. Demarco,
D. Hume,
W. M. Itano,
M. Jensen,
J. D. Jost,
E. Knill,
J. Koelemeij,
C. Langer,
W. Oskay,
R. Ozeri,
R. Reichle,
T. Rosenband,
T. Schaetz,
P. O. Schmidt,
S. Seidelin
Abstract:
We briefly discuss recent experiments on quantum information processing using trapped ions at NIST. A central theme of this work has been to increase our capabilities in terms of quantum computing protocols, but we have also applied the same concepts to improved metrology, particularly in the area of frequency standards and atomic clocks. Such work may eventually shed light on more fundamental i…
▽ More
We briefly discuss recent experiments on quantum information processing using trapped ions at NIST. A central theme of this work has been to increase our capabilities in terms of quantum computing protocols, but we have also applied the same concepts to improved metrology, particularly in the area of frequency standards and atomic clocks. Such work may eventually shed light on more fundamental issues, such as the quantum measurement problem.
△ Less
Submitted 2 August, 2005;
originally announced August 2005.
-
Getting the elastic scattering length by observing inelastic collisions in ultracold metastable helium atoms
Authors:
Signe Seidelin,
Rodolphe Hoppeler,
Olivier Sirjean,
Denis Boiron,
Alain Aspect,
Christoph I. Westbrook,
Jose Viana Gomes
Abstract:
We report an experiment measuring simultaneously the temperatureand the flux of ions produced by a cloud of triplet metastablehelium atoms at the Bose-Einstein critical temperature. The onsetof condensation is revealed by a sharp increase of the ion fluxduring evaporative cooling. Combining our measurements withprevious measurements of ionization in a pure BEC,we extract an improved value of the…
▽ More
We report an experiment measuring simultaneously the temperatureand the flux of ions produced by a cloud of triplet metastablehelium atoms at the Bose-Einstein critical temperature. The onsetof condensation is revealed by a sharp increase of the ion fluxduring evaporative cooling. Combining our measurements withprevious measurements of ionization in a pure BEC,we extract an improved value of the scattering length$a=11.3^{+2}_{-1}$ nm. The analysis includes corrections takinginto accountthe effect of atomic interactions on the criticaltemperature, and thus an independent measurement of the scatteringlength would allow a new test of these calculations.
△ Less
Submitted 31 August, 2004; v1 submitted 13 January, 2004;
originally announced January 2004.
-
Using ion production to monitor the birth and death of a metastable helium Bose-Einstein condensate
Authors:
S. Seidelin,
O. Sirjean,
J. Viana Gomes,
D. Boiron,
C. I. Westbrook,
A. Aspect
Abstract:
We discuss observations of the ion flux from a cloud of trapped metastable helium atoms. Both Bose-Einstein condensates and thermal clouds were investigated. The ion flux is compared to time-of-flight observations of the expanded cloud. We show data concerning BEC formation and decay, as well as measurements of two- and three-body ionization rate constants. We also discuss possible improvements…
▽ More
We discuss observations of the ion flux from a cloud of trapped metastable helium atoms. Both Bose-Einstein condensates and thermal clouds were investigated. The ion flux is compared to time-of-flight observations of the expanded cloud. We show data concerning BEC formation and decay, as well as measurements of two- and three-body ionization rate constants. We also discuss possible improvements and extensions of our results.
△ Less
Submitted 6 November, 2002;
originally announced November 2002.
-
Ionization rates in a Bose-Einstein condensate of metastable Helium
Authors:
O. Sirjean,
S. Seidelin,
J. Viana Gomes,
D. Boiron,
C. I. Westbrook,
A. Aspect,
G. V. Shlyapnikov
Abstract:
We have studied ionizing collisions in a BEC of He*. Measurements of the ion production rate combined with measurements of the density and number of atoms for the same sample allow us to estimate both the 2 and 3-body contributions to this rate. A comparison with the decay of the number of condensed atoms in our magnetic trap, in the presence of an rf-shield, indicates that ionizing collisions a…
▽ More
We have studied ionizing collisions in a BEC of He*. Measurements of the ion production rate combined with measurements of the density and number of atoms for the same sample allow us to estimate both the 2 and 3-body contributions to this rate. A comparison with the decay of the number of condensed atoms in our magnetic trap, in the presence of an rf-shield, indicates that ionizing collisions are largely or wholly responsible for the loss. Quantum depletion makes a substantial correction to the 3-body rate constant.
△ Less
Submitted 6 August, 2002;
originally announced August 2002.
