-
A stochastic discrete slip approach to microplasticity: Application to submicron W pillars
Authors:
Carlos J. Ruestes,
Javier Segurado
Abstract:
A stochastic discrete slip approach is proposed to model plastic deformation in submicron domains. The model is applied to the study of submicron pillar ($D~\leq~1μm$) compression experiments on tungsten (W), a prototypical metal for applications under extreme conditions. Slip events are geometrically resolved in the specimen and considered as eigenstrain fields producing a displacement jump acros…
▽ More
A stochastic discrete slip approach is proposed to model plastic deformation in submicron domains. The model is applied to the study of submicron pillar ($D~\leq~1μm$) compression experiments on tungsten (W), a prototypical metal for applications under extreme conditions. Slip events are geometrically resolved in the specimen and considered as eigenstrain fields producing a displacement jump across a slip plane. This novel method includes several aspects of utmost importance to small-scale plasticity, i.e. source truncation effects, surface nucleation effects, starvation effects, slip localization and an inherently stochastic response. Implementation on an FFT-spectral solver results in an efficient computational 3-D framework. Simulations of submicron W pillars ($D~\leq~1μm$) under compression show that the method is capable of capturing salient features of sub-micron scale plasticity. These include the natural competition between pre-existing dislocations and surface nucleation of new dislocations. Our results predict distinctive flow stress power-law dependence exponents as well as a size-dependence of the strain-rate sensitivity exponent. The results are thoroughly compared with experimental literature.
△ Less
Submitted 16 April, 2024;
originally announced April 2024.
-
Martensite decomposition kinetics in additively manufactured Ti-6Al-4V alloy: in-situ characterisation and phase-field modelling
Authors:
A. D. Boccardo,
Z. Zou,
M. Simonelli,
M. Tong,
J. Segurado,
S. B. Leen,
D. Tourret
Abstract:
Additive manufacturing of Ti-6Al-4V alloy via laser powder-bed fusion leads to non-equilibrium $α'$ martensitic microstructures, with high strength but poor ductility and toughness. These properties may be modified by heat treatments, whereby the $α'$ phase decomposes into equilibrium $α+β$ structures, while possibly conserving microstructural features and length scales of the $α'$ lath structure.…
▽ More
Additive manufacturing of Ti-6Al-4V alloy via laser powder-bed fusion leads to non-equilibrium $α'$ martensitic microstructures, with high strength but poor ductility and toughness. These properties may be modified by heat treatments, whereby the $α'$ phase decomposes into equilibrium $α+β$ structures, while possibly conserving microstructural features and length scales of the $α'$ lath structure. Here, we combine experimental and computational methods to explore the kinetics of martensite decomposition. Experiments rely on in-situ characterisation (electron microscopy and diffraction) during multi-step heat treatment from 400$^{\circ}$C up to the alloy $β$-transus temperature (995$^{\circ}$C). Computational simulations rely on an experimentally-informed computationally-efficient phase-field model. Experiments confirmed that as-built microstructures were fully composed of martensitic $α'$ laths. During martensite decomposition, nucleation of the $β$ phase occurs primarily along $α'$ lath boundaries, with traces of $β$ nucleation along crystalline defects. Phase-field results, using electron backscatter diffraction maps of as-built microstructures as initial conditions, are compared directly with in-situ characterisation data. Experiments and simulations confirmed that, while full decomposition into stable $α+β$ phases may be complete at 650$^{\circ}$C provided sufficient annealing time, visible morphological evolution of the microstructure was only observed for $T\geq\,$700$^{\circ}$C, without modification of the prior-$β$ grain structure.
△ Less
Submitted 15 April, 2024;
originally announced April 2024.
-
An FFT based approach to account for elastic interactions in OkMC: Application to dislocation loops in iron
Authors:
Rodrigo Santos-Güemes,
Christophe J. Ortiz,
Javier Segurado
Abstract:
Object kinetic Montecarlo (OkMC) is a fundamental tool for modeling defect evolution in volumes and times far beyond atomistic models. The elastic interaction between defects is classically considered using a dipolar approximation but this approach is limited to simple cases and can be inaccurate for large and close interacting defects. In this work a novel framework is proposed to include "exact"…
▽ More
Object kinetic Montecarlo (OkMC) is a fundamental tool for modeling defect evolution in volumes and times far beyond atomistic models. The elastic interaction between defects is classically considered using a dipolar approximation but this approach is limited to simple cases and can be inaccurate for large and close interacting defects. In this work a novel framework is proposed to include "exact" elastic interactions between defects in OkMC valid for any type of defect and anisotropic media. In this method, the elastic interaction energy of a defect is computed by volume integration of its elastic strain multiplied by the stress created by all the other defects, being both fields obtained numerically using a FFT solver. The resulting interaction energies reproduce analytical elastic solutions and show the limited accuracy of dipole approaches for close and large defects.
The OkMC framework proposed is used to simulate the evolution in space and time of self-interstitial atoms and dislocation loops in iron. It is found that including the anisotropy has a quantitative effect in the evolution of all the type of defects studied. Regarding dislocation loops, it is observed that using the "exact" interaction energy result in higher interactions than using the dipole approximation for close loops.
△ Less
Submitted 14 March, 2024;
originally announced March 2024.
-
Efficiency and accuracy of GPU-parallelized Fourier spectral methods for solving phase-field models
Authors:
A. D. Boccardo,
M. Tong,
S. B. Leen,
D. Tourret,
J. Segurado
Abstract:
Phase-field models are widely employed to simulate microstructure evolution during processes such as solidification or heat treatment. The resulting partial differential equations, often strongly coupled together, may be solved by a broad range of numerical methods, but this often results in a high computational cost, which calls for advanced numerical methods to accelerate their resolution. Here,…
▽ More
Phase-field models are widely employed to simulate microstructure evolution during processes such as solidification or heat treatment. The resulting partial differential equations, often strongly coupled together, may be solved by a broad range of numerical methods, but this often results in a high computational cost, which calls for advanced numerical methods to accelerate their resolution. Here, we quantitatively test the efficiency and accuracy of semi-implicit Fourier spectral-based methods, implemented in Python programming language and parallelized on a graphics processing unit (GPU), for solving a phase-field model coupling Cahn-Hilliard and Allen-Cahn equations. We compare computational performance and accuracy with a standard explicit finite difference (FD) implementation with similar GPU parallelization on the same hardware. For a similar spatial discretization, the semi-implicit Fourier spectral (FS) solvers outperform the FD resolution as soon as the time step can be taken 5 to 6 times higher than afforded for the stability of the FD scheme. The accuracy of the FS methods also remains excellent even for coarse grids, while that of FD deteriorates significantly. Therefore, for an equivalent level of accuracy, semi-implicit FS methods severely outperform explicit FD, by up to 4 orders of magnitude, as they allow much coarser spatial and temporal discretization.
△ Less
Submitted 14 June, 2023; v1 submitted 7 June, 2023;
originally announced June 2023.
-
Microstructure sensitive fatigue life prediction model for SLM fabricated Hastelloy-X
Authors:
Chandrashekhar M. Pilgar,
Ana Fernandez,
Javier Segurado
Abstract:
A microstructure-sensitive fatigue life prediction framework based on CP-FFT is proposed to study SLM fabricated Hastelloy-X. The microstructure enters in the model through the shape, size and orientation distributions of grains in the RVEs, which are generated from experimental EBSD data. The framework has been applied to specimens built in two different directions with different polycrystalline…
▽ More
A microstructure-sensitive fatigue life prediction framework based on CP-FFT is proposed to study SLM fabricated Hastelloy-X. The microstructure enters in the model through the shape, size and orientation distributions of grains in the RVEs, which are generated from experimental EBSD data. The framework has been applied to specimens built in two different directions with different polycrystalline microstructures and is able to accurately predict their fatigue life, using just two experiments for calibration. The model reproduces the better fatigue performance found experimentally at high stresses for samples built in transverse direction, identifying the origin of this anisotropy in grain aspect ratios.
△ Less
Submitted 15 November, 2022;
originally announced November 2022.
-
An implicit FFT-based method for wave propagation in elastic heterogeneous media
Authors:
R. Sancho,
V. Rey de Pedraza,
P. Lafourcade,
R. A. Lebensohn,
J. Segurado
Abstract:
An FFT-based algorithm is developed to simulate the propagation of elastic waves in heterogeneous $d$-dimensional rectangular shape domains. The method allows one to prescribe the displacement as a function of time in a subregion of the domain, emulating the application of Dirichlet boundary conditions on an outer face. Time discretization is performed using an unconditionally stable beta-Newmark…
▽ More
An FFT-based algorithm is developed to simulate the propagation of elastic waves in heterogeneous $d$-dimensional rectangular shape domains. The method allows one to prescribe the displacement as a function of time in a subregion of the domain, emulating the application of Dirichlet boundary conditions on an outer face. Time discretization is performed using an unconditionally stable beta-Newmark approach. The implicit problem for obtaining the displacement at each time step is solved by transforming the equilibrium equations into Fourier space and solving the corresponding linear system with a preconditioned Krylov solver. The resulting method is validated against analytical solutions and compared with implicit and explicit finite element simulations and with an explicit FFT approach. The accuracy of the method is similar to or better than that of finite elements, and the numerical performance is clearly superior, allowing the use of much larger models. To illustrate the capabilities of the method, some numerical examples are presented, including the propagation of planar, circular, and spherical waves and the simulation of the propagation of a pulse in a polycrystalline medium.
△ Less
Submitted 15 November, 2022;
originally announced November 2022.
-
A generalized line tension model for precipitate strengthening in metallic alloys
Authors:
R. Santos-Güemes,
J. Segurado,
J. LLorca
Abstract:
A generalized line tension model has been developed to estimate the critical resolved shear stress in precipitation hardened alloys. The model is based in previous line tension models for regular arrays of either impenetrable or shearable spherical precipitates that were expanded to take into account the effect of the elastic mismatch between the matrix and the precipitates. The model parameters a…
▽ More
A generalized line tension model has been developed to estimate the critical resolved shear stress in precipitation hardened alloys. The model is based in previous line tension models for regular arrays of either impenetrable or shearable spherical precipitates that were expanded to take into account the effect of the elastic mismatch between the matrix and the precipitates. The model parameters are calibrated from dislocation dynamics simulations that covered a wide range of precipitate diameters and spacing as well as of the mismatch in elastic constants. This model is extended to deal with random arrays of monodisperse spherical precipitates by changing the geometrical parameters of the model by the averaged ones corresponding to the random distributions. The model predictions were in good agreement with the critical resolved shear stresses obtained from dislocation dynamics simulations of random spherical precipitates distributions for both impenetrable and shearable precipitates, providing a fast and accurate tool to predict precipitate strengthening in metallic alloys.
△ Less
Submitted 23 January, 2022;
originally announced January 2022.
-
Adaptation and validation of FFT methods for homogenization of lattice based materials
Authors:
S. Lucarini,
L. Cobian,
A. Voitus,
J. Segurado
Abstract:
An FFT framework which preserves a good numerical performance in the case of domains with large regions of empty space is proposed and analyzed for its application to lattice based materials. Two spectral solvers specially suited to resolve problem containing phases with zero stiffness are considered (1) a Galerkin approach combined with the MINRES linear solver and a discrete differentiation rule…
▽ More
An FFT framework which preserves a good numerical performance in the case of domains with large regions of empty space is proposed and analyzed for its application to lattice based materials. Two spectral solvers specially suited to resolve problem containing phases with zero stiffness are considered (1) a Galerkin approach combined with the MINRES linear solver and a discrete differentiation rule and (2) a modification of a displacement FFT solver which penalizes the indetermination of strains in the empty regions, leading to a fully determined equation. The solvers are combined with several approaches to smooth out the lattice surface, based on modifying the actual stiffness of the voxels not fully embedded in the lattice or empty space. The accuracy of the resulting approaches is assessed for an octet-lattice by comparison with FEM solutions for different relative densities and discretization levels. It is shown that the adapted Galerkin approach combined with a Voigt surface smoothening was the best FFT framework considering accuracy, numerical efficiency and h-convergence. With respect to numerical efficiency it was observed that FFT becomes competitive compared to FEM for cells with relative densities above 7%. Finally, to show the real potential of the approaches presented, the FFT frameworks are used to simulate the behavior of a printed lattice by using direct 3D tomographic data as input. The approaches proposed include explicitly in the simulation the actual surface roughness and internal porosity resulting from the fabrication process. The simulations allowed to quantify the reduction of the lattice stiffness \rev{as well as to resolve the stress localization of 50% near large pores.
△ Less
Submitted 2 October, 2021;
originally announced October 2021.
-
An FFT-based approach for Bloch wave analysis: application to polycrystals
Authors:
J. Segurado,
R. A. Lebensohn
Abstract:
A method based on the Fast Fourier Transform is proposed to obtain the dispersion relation of acoustic waves in heterogeneous periodic media with arbitrary microstructures. The microstructure is explicitly considered using a voxelized Representative Volume Element (RVE). The dispersion diagram is obtained solving an eigenvalue problem for Bloch waves in Fourier space. To this aim, two linear opera…
▽ More
A method based on the Fast Fourier Transform is proposed to obtain the dispersion relation of acoustic waves in heterogeneous periodic media with arbitrary microstructures. The microstructure is explicitly considered using a voxelized Representative Volume Element (RVE). The dispersion diagram is obtained solving an eigenvalue problem for Bloch waves in Fourier space. To this aim, two linear operators representing stiffness and mass are defined through the use of differential operators in Fourier space. The smallest eigenvalues are obtained using the implicitly restarted Lanczos and the subspace iteration methods, and the required inverse of the stiffness operator is done using the conjugate gradient with a preconditioner. The method is used to study the propagation of acoustic waves in elastic polycrystals, showing the strong effect of crystal anistropy and polycrystaline texture on the propagation. It is shown that the method combines the simplicity of classical Fourier series analysis with the versatility of Finite Elements to account for complex geometries proving an efficient and general approach which allows the use of large RVEs in 3D.
△ Less
Submitted 23 June, 2021;
originally announced June 2021.
-
An FFT framework for simulating non-local ductile failure in heterogeneous materials
Authors:
M. Magri,
S. Lucarini,
G. Lemoine,
L. Adam,
J. Segurado
Abstract:
The simulation of fracture using continuum ductile damage models attains a pathological discretization dependence caused by strain localization, after loss of ellipticity of the problem, in regions whose size is connected to the spatial discretization. Implicit gradient techniques suppress this problem introducing some inelastic non-local fields and solving an enriched formulation where the classi…
▽ More
The simulation of fracture using continuum ductile damage models attains a pathological discretization dependence caused by strain localization, after loss of ellipticity of the problem, in regions whose size is connected to the spatial discretization. Implicit gradient techniques suppress this problem introducing some inelastic non-local fields and solving an enriched formulation where the classical balance of linear momentum is fully coupled with a Helmholtz-type equation for each of the non-local variable. Such Helmholtz-type equations determine the distribution of the non-local fields in bands whose width is controlled by a characteristic length, independently on the spatial discretization. The numerical resolution of this coupled problem using the Finite Element method is computationally very expensive and its use to simulate the damage process in 3D multi-phase microstructures becomes prohibitive. In this work, we propose a novel FFT-based iterative algorithm for simulating gradient ductile damage in computational homogenization problems. In particular, the Helmholtz-type equation of the implicit gradient approach is properly generalized to model the regularization of damage in multi-phase media, where multiple damage variables and different characteristic lengths may come into play. In the proposed iterative algorithm, two distinct problems are solved in a staggered fashion: (i) a conventional mechanical problem via a FFT-Galerkin solver with mixed macroscopic loading control and (ii) the generalized Helmholtz-type equation using a Krylov-based algorithm combined with an efficient pre-conditioner. The numerical implementation is firstly validated. Finally, the robustness and efficiency of the algorithm is demonstrated in the simulation of failure of complex 3D particle reinforced composites characterized by millions of degrees of freedom.
△ Less
Submitted 4 March, 2021;
originally announced March 2021.
-
Dislocation dynamics prediction of the strength of Al-Cu alloys containing shearable $θ''$ precipitates
Authors:
R. Santos-Güemes,
L. Capolungo,
J. Segurado,
J. LLorca
Abstract:
The critical resolved shear stress of an Al 4 wt. \% Cu alloy containing a homogeneous distribution of $θ''$ precipitates was determined by means of dislocation dynamics simulations. The size distribution, shape, orientation and volume fraction of the precipitates in the alloy were obtained from transmission electron microscopy observations while the parameters controlling the dislocation/precipit…
▽ More
The critical resolved shear stress of an Al 4 wt. \% Cu alloy containing a homogeneous distribution of $θ''$ precipitates was determined by means of dislocation dynamics simulations. The size distribution, shape, orientation and volume fraction of the precipitates in the alloy were obtained from transmission electron microscopy observations while the parameters controlling the dislocation/precipitate interactions (elastic mismatch, transformation strains, dislocation mobility and cross-slip probability, etc.) were calculated from atomistic simulations. The precipitates were assumed to be either impenetrable or shearable by the dislocations, the latter characterized by a threshold shear stress that has to be overcome to shear the precipitate. The predictions of the simulations in terms of the critical resolved shear stress and of the dislocation/precipitate interaction mechanisms were in good agreement with the experimental results. It was concluded that the optimum strength of this alloy is attained with a homogeneous distribution of $θ''$ precipitates whose average size ($\approx$ 40 nm) is at the transition between precipitate shearing and loo**. Overall, the dislocation dynamics strategy presented in this paper is able to provide quantitative predictions of precipitate strengthening in metallic alloys.
△ Less
Submitted 17 February, 2021;
originally announced February 2021.
-
A multiplicative finite strain crystal plasticity formulation based on additive elastic corrector rates: Theory and numerical implementation
Authors:
Meijuan Zhang,
K. Nguyen,
Javier Segurado,
Francisco J. Montans
Abstract:
The purpose of continuum plasticity models is to efficiently predict the behavior of structures beyond their elastic limits. The purpose of multiscale materials science models, among them crystal plasticity models, is to understand the material behavior and design the material for a given target. The current successful continuum hyperelastoplastic models are based in the multiplicative decompositi…
▽ More
The purpose of continuum plasticity models is to efficiently predict the behavior of structures beyond their elastic limits. The purpose of multiscale materials science models, among them crystal plasticity models, is to understand the material behavior and design the material for a given target. The current successful continuum hyperelastoplastic models are based in the multiplicative decomposition from crystal plasticity, but significant differences in the computational frameworks of both approaches remain, making comparisons not straightforward.
In previous works we have presented a theory for multiplicative continuum elastoplasticity which solved many long-standing issues, preserving the appealing structure of additive infinitesimal Wilkins algorithms. In this work we extend the theory to crystal plasticity. We show that the new formulation for crystal plasticity is parallel and comparable to continuum plasticity, preserving the attractive aspects of the framework: (1) simplicity of the kinematics reaching a parallelism with the infinitesimal framework; (2) possibility of very large elastic strains and unrestricted type of hyperelastic behavior; (3) immediate plain backward-Euler algorithmic implementation of the continuum theory avoiding algorithmically motivated exponential map**s, yet preserving isochoric flow; (4) absence of Mandel-type stresses in the formulation; (5) objectiveness and weak-invariance by construction due to the use of flow rules in terms of elastic corrector rates. We compare the results of our crystal plasticity formulation with the classical formulation from Kalidindi and Anand based on quadratic strains and an exponential map** update of the plastic deformation gradient.
△ Less
Submitted 16 December, 2020; v1 submitted 12 July, 2020;
originally announced July 2020.
-
Multiscale modelling of precipitation hardening in Al-Cu alloys: dislocation dynamics simulations and experimental validation
Authors:
R. Santos-Güemes,
B. Bellón,
G. Esteban-Manzanares,
J. Segurado,
L. Capolungo,
J. LLorca
Abstract:
The mechanisms of dislocation/precipitate interactions were analyzed in an Al-Cu alloy containing a homogeneous dispersion of $θ'$ precipitates by means of discrete dislocation dynamics simulations. The simulations were carried out within the framework of the discrete-continuous method and the precipitates were assumed to be impenetrable by dislocations. The main parameters that determine the disl…
▽ More
The mechanisms of dislocation/precipitate interactions were analyzed in an Al-Cu alloy containing a homogeneous dispersion of $θ'$ precipitates by means of discrete dislocation dynamics simulations. The simulations were carried out within the framework of the discrete-continuous method and the precipitates were assumed to be impenetrable by dislocations. The main parameters that determine the dislocation/precipitate interactions (elastic mismatch, stress-free transformation strains, dislocation mobility and cross-slip rate) were obtained from atomistic simulations, while the size, shape, spatial distribution and volume fraction of the precipitates were obtained from transmission electron microscopy. The predictions of the critical resolved shear stress (including the contribution of solid solution) were in agreement with the experimental results obtained by means of compression tests in micropillars of the Al-Cu alloy oriented for single slip. The simulations revealed that the most important contribution to the precipitation hardening of the alloy was provided by the stress-free transformation strains followed by the solution hardening and the Orowan mechanism due to the bow-out of the dislocations around the precipitates.
△ Less
Submitted 8 February, 2020;
originally announced February 2020.
-
A coupled model of diffusional creep of polycrystalline solids based on climb of dislocations at grain boundaries
Authors:
M. Magri,
G. Lemoine,
L. Adam,
J. Segurado
Abstract:
A continuum theory based on thermodynamics has been developed for modeling diffusional creep of polycrystalline solids. It consists of a coupled problem of vacancy diffusion and mechanics where the vacancy generation/absorption at grain boundaries is driven by grain boundary dislocations climb. The model is stated in terms of general balance laws and completed by the choice of constitutive equatio…
▽ More
A continuum theory based on thermodynamics has been developed for modeling diffusional creep of polycrystalline solids. It consists of a coupled problem of vacancy diffusion and mechanics where the vacancy generation/absorption at grain boundaries is driven by grain boundary dislocations climb. The model is stated in terms of general balance laws and completed by the choice of constitutive equations consistent with classical non-equilibrium thermodynamics. The kinetics of diffusional creep is derived from physically-based mechanisms of climb of dislocations at grain boundaries, thus introducing a dependence of diffusional creep on the density and mobility of boundary dislocations. Several representative examples have been solved using the finite element method and assuming representative volume elements made up of an array of regular-shaped crystals. The effect of stress, temperature, grain size, and grain boundary dislocation mobility is analyzed and compared with classical theories of diffusional creep. The simulation results demonstrate the ability of the present model to reproduce the macroscopic stress and grain size dependence observed under both diffusion and interface controlled regimes as well the evolution of this dependency with the temperature. In addition, the numerical implementation of the model allows to predict the evolution of microscopic fields through the microstructure.
△ Less
Submitted 15 November, 2019;
originally announced November 2019.
-
Simulation of the Hall-Petch effect in FCC polycrystals by means of strain gradient crystal plasticity and FFT homogenization
Authors:
S. Haouala,
S. Lucarini,
J. LLorca,
J. Segurado
Abstract:
The influence of grain size on the flow stress of various FCC polycrystals (Cu, Al, Ag and Ni) has been analyzed by means of computational homogenization of a representative volume element of the microstructure using a FFT approach in combination with a strain gradient crystal plasticity model. The density of geometrically necessary dislocations resulting from the incompatibility of plastic deform…
▽ More
The influence of grain size on the flow stress of various FCC polycrystals (Cu, Al, Ag and Ni) has been analyzed by means of computational homogenization of a representative volume element of the microstructure using a FFT approach in combination with a strain gradient crystal plasticity model. The density of geometrically necessary dislocations resulting from the incompatibility of plastic deformation among different crystals was obtained from the Nye tensor, which was efficiently obtained from the curl operation in the Fourier space. The simulation results were in good agreement with the experimental data for Cu, Al, Ag and Ni polycrystals for grain sizes > 20 microns and strains < 5% and provided a physical explanation for the higher strengthening provided by grain boundaries in Al and Ni, as compared with Cu and Ag. The investigation demonstrates how the combination of FFT with strain gradient crystal plasticity can be used to include effect of grain boundaries in the mechanical behavior of polycrystals using realistic representative volume elements of the microstructure.
△ Less
Submitted 4 October, 2019;
originally announced October 2019.
-
Effect of slip transmission at grain boundaries in Al bicrystals
Authors:
S. Haouala,
R. Alizadeh,
T. R. Bieler,
J. Segurado,
J. LLorca
Abstract:
The effect of slip transfer on the deformation mechanisms of Al bicrystals was explored using a rate-dependent dislocation-based crystal plasticity model. Three different types of grain boundaries (GBs) were included in the model by modifying the rate of dislocation accumulation near the GB in the Kocks-Mecking law, leading to fully-opaque (dislocation blocking), fully-transparent and partially-tr…
▽ More
The effect of slip transfer on the deformation mechanisms of Al bicrystals was explored using a rate-dependent dislocation-based crystal plasticity model. Three different types of grain boundaries (GBs) were included in the model by modifying the rate of dislocation accumulation near the GB in the Kocks-Mecking law, leading to fully-opaque (dislocation blocking), fully-transparent and partially-transparent GBs. In the latter, slip transmission is only allowed in pairs of SS in neighbour grains that are suitably oriented for slip transfer according to the Luster-Morris parameter. Modifications of the GB character led to important changes in the deformation mechanisms at the GB. In general, bicrystals with fully-opaque boundaries showed an increase in the dislocation density near the GB, which was associated with an increase in the Von Mises stress. In contrast, the dislocation pile-ups and the stress concentration were less pronounced in the case of partially-transparent boundaries as the slip in one grain can progress into the next grain with some degree of continuity. No stress concentrations were found at these boundaries for fully-transparent boundaries, and there was continuity of strain across the boundary, which is not typical of most experimentally observed GBs. Simulations of ideal bicrystals oriented for favorable slip transfer on the most highly favored slip system in grains with high Schmid factors for slip transfer depends on the number of active SS in operation in the neighborhood and that most boundaries will lead to nearly opaque conditions while some boundaries will be transparent. Finally, the model was applied to a particular experimentally observed GB in which slip transfer was clearly operating indicating that the model predicted a nearly transparent GB.
△ Less
Submitted 7 September, 2019;
originally announced September 2019.
-
Effect of Grain Orientation and Local Strains on Void Growth and Coalescence in Titanium
Authors:
Marina Pushkareva,
Federico Sket,
Javier Segurado,
Javier Llorca,
Mohammed Yandouzi,
Arnaud Weck
Abstract:
Ductile fracture has been extensively studied in metals with weak mechanical anisotropy such as copper and aluminum. The fracture of more anisotropic metals, especially those with a hexagonal crystal structure (e.g. titanium), remains far less understood. This paper investigates the ductile fracture process in commercially pure titanium (CP-Ti) with particular emphasis on the influence of grain or…
▽ More
Ductile fracture has been extensively studied in metals with weak mechanical anisotropy such as copper and aluminum. The fracture of more anisotropic metals, especially those with a hexagonal crystal structure (e.g. titanium), remains far less understood. This paper investigates the ductile fracture process in commercially pure titanium (CP-Ti) with particular emphasis on the influence of grain orientation and local state of strain on void growth. An experimental approach was developed to directly relate the growth of a void in three dimensions to its underlying grain orientation. Grain orientation was obtained by electron back scattered diffraction on void-containing CP-Ti sheets prior to their diffusion bonding. Changes in void dimensions were measured during in-situ straining within an x-ray tomography system. The strong influence of the embedded grain orientation and that of its neighbors on void growth rate and coalescence has been experimentally quantified. Finite element crystal plasticity simulations that take into account both grain orientation and the local strain state were found to predict the experimental void growth. Grains where basal slip dominates show the largest void growth rates because they are closer to a plane strain condition that favors void growth and coalescence.
△ Less
Submitted 3 June, 2019;
originally announced June 2019.
-
DBFFT: A displacement based FFT approach for non-linear homogenization of the mechanical behavior
Authors:
Sergio Lucarini,
Javier Segurado
Abstract:
Most of the FFT methods available for homogenization of the mechanical response use the strain/deformation gradient as unknown, imposing their compatibility using Green's functions or projection operators. This implies the allocation of redundant information and, when the method is based in solving a linear equation, the rank-deficiency of the resulting system. In this work we propose a fast, robu…
▽ More
Most of the FFT methods available for homogenization of the mechanical response use the strain/deformation gradient as unknown, imposing their compatibility using Green's functions or projection operators. This implies the allocation of redundant information and, when the method is based in solving a linear equation, the rank-deficiency of the resulting system. In this work we propose a fast, robust and memory-efficient FFT homogenization framework in which the displacement field on the Fourier space is the unknown: the displacement based FFT (DBFFT) algorithm. The framework allows any general non-linear constitutive behavior for the phases and direct strain, stress and mixed control of the macroscopic load. In the linear case, the method results in a linear system defined in terms of linear operators in the Fourier space and that does not require a reference medium. The system has an associated full rank Hermitian matrix and can be solved using iterative Krylov solvers and allows the use of preconditioners. A preconditioner is proposed to improve the efficiency of the system resolution. Finally, some numerical examples including elastic, hyperelastic and viscoplastic materials are solved to check the accuracy and efficiency of the method. The computational cost reduction respect the Galerkin-FFT was around 30%.
△ Less
Submitted 26 August, 2019; v1 submitted 27 May, 2019;
originally announced May 2019.
-
Development of a thermo-mechanically coupled crystal plasticity modeling framework: application to polycrystalline homogenization
Authors:
Jifeng Li,
Ignacio Romero,
Javier Segurado
Abstract:
Accurate predictions of thermo-mechanically coupled process in metals can lead to a reduction of cost and an increase of productivity in manufacturing processes such as forming. For modeling these coupled processes with the finite element method, accurate descriptions of both the mechanical and the thermal responses of the material, as well as their interaction, are needed. Conventional material m…
▽ More
Accurate predictions of thermo-mechanically coupled process in metals can lead to a reduction of cost and an increase of productivity in manufacturing processes such as forming. For modeling these coupled processes with the finite element method, accurate descriptions of both the mechanical and the thermal responses of the material, as well as their interaction, are needed. Conventional material modeling employs empirical macroscopic constitutive relations but does not account for the actual thermo-mechanical mechanisms occurring at the microscopic level. However, the consideration of the latter might be crucial to obtain accurate predictions and a complete understanding of the underlying physics. In this work we describe a fully coupled implicit thermo-mechanical framework for crystal plasticity simulations. This framework includes thermal strains, temperature dependency of the crystal behavior and heat generation by dissipation due to plastic slip and allows the use of large deformation steps thanks to the implicit integration of the governing equations. Its use within computational homogenization simulations allows to bridge the plastic deformation and temperature gradients at the macroscopic scale with the microscopic slip at the grain scale. A series of numerical examples are presented to validate the approach.
△ Less
Submitted 8 March, 2019;
originally announced March 2019.
-
An algorithm for stress and mixed control in Galerkin based FFT homogenization
Authors:
S. Lucarini,
J. Segurado
Abstract:
A new algorithm is proposed to impose a macroscopic stress or mixed stress/deformation gradient history in the context of non-linear Galerkin based FFT homogenization. The method proposed is based in the definition of a modified projection operator in which the null frequencies enforce the type of control (stress or strain) for each component of either the macroscopic first Piola stress or the def…
▽ More
A new algorithm is proposed to impose a macroscopic stress or mixed stress/deformation gradient history in the context of non-linear Galerkin based FFT homogenization. The method proposed is based in the definition of a modified projection operator in which the null frequencies enforce the type of control (stress or strain) for each component of either the macroscopic first Piola stress or the deformation gradient. The resulting problem is solved exactly as the original variational method and it does not require additional iterations compared to the strain control version, neither in the linear iterative solver, nor in the Newton scheme. The efficiency of the method proposed is demonstrated with a series of numerical examples, including a polycrystal and a particle reinforced hyperelastic material.
△ Less
Submitted 19 January, 2019;
originally announced January 2019.
-
An atomistic investigation of the interaction of dislocations with Guinier-Preston zones in Al-Cu alloys
Authors:
G. Esteban-Manzanares,
E. Martínez,
J. Segurado,
L. Capolungo,
J. LLorca
Abstract:
The interaction between edge dislocations and Guinier-Preston zones in an Al-Cu alloy was analyzed by means of atomistic simulations. The different thermodynamic functions that determine the features of these obstacles for the dislocation glide were computed using molecular statics, molecular dynamics and the nudged elastic band method. It was found that Guinier-Preston zones are sheared by disloc…
▽ More
The interaction between edge dislocations and Guinier-Preston zones in an Al-Cu alloy was analyzed by means of atomistic simulations. The different thermodynamic functions that determine the features of these obstacles for the dislocation glide were computed using molecular statics, molecular dynamics and the nudged elastic band method. It was found that Guinier-Preston zones are sheared by dislocations and the rate at which dislocations overcome the precipitate is controlled by the activation energy, $ΔU$, in agreement with the postulates of the harmonic transition state theory. Moreover, the entropic contribution to the Helmholtz activation free energy was in the range 1.3-1.8$k_b$, which can be associated with the typical vibrational entropy of solids. Finally, an estimation of the initial shear flow stress as a function of temperature was carried out from the thermodynamic data provided by the atomistic simulations. Comparison with experimental results showed that the effect of the random precipitate distribution and of the dislocation character and dislocation/precipitation orientation has to be taken into account in the simulations to better reproduce experiments.
△ Less
Submitted 24 September, 2018;
originally announced September 2018.
-
On the accuracy of spectral solvers for micromechanics based fatigue modeling
Authors:
Sergio Lucarini,
Javier Segurado
Abstract:
A framework based on FFT is proposed for micromechanical fatigue modeling of polycrystals as alternative to the Finite Element method (FEM). The variational FFT approach is used with a crystal plasticity model for the cyclic behavior of the grains introduced through a FEM material subroutine, in particular an Abaqus umat. The framework also includes an alternative projection operator based on disc…
▽ More
A framework based on FFT is proposed for micromechanical fatigue modeling of polycrystals as alternative to the Finite Element method (FEM). The variational FFT approach is used with a crystal plasticity model for the cyclic behavior of the grains introduced through a FEM material subroutine, in particular an Abaqus umat. The framework also includes an alternative projection operator based on discrete differentiation to improve the microfield fidelity allowing to include second phases. The accuracy and efficiency of the FFT framework for microstructure sensitive fatigue prediction are assessed by comparing with FEM. The macroscopic cyclic response of a polycrystal obtained with both methods were indistinguishable, irrespective of the number of cycles. The microscopic fields presented small differences that decrease when using the discrete projection operator, which indeed allowed simulating accurately microstructures containing very stiff particles. Finally, the maximum differences in the fatigue life estimation from the microfields respect FEM were around 15% . In summary, this framework allows predicting fatigue life with a similar accuracy than using FEM but strongly reducing the computational cost.
△ Less
Submitted 22 June, 2018;
originally announced June 2018.
-
Discrete dislocation dynamics simulations of dislocation-$θ'$ precipitate interaction in Al-Cu alloys
Authors:
R. Santos-Güemes,
G. Esteban-Manzanares,
I. Papadimitriou,
J. Segurado,
L. Capolungo,
J. LLorca
Abstract:
The mechanisms of dislocation/precipitate interaction were studied by means of discrete dislocation dynamics within a multiscale approach. Simulations were carried out using the discrete continuous method in combination with a fast Fourier transform solver to compute the mechanical fields. The original simulation strategy was modified to include straight dislocation segments by means of the field…
▽ More
The mechanisms of dislocation/precipitate interaction were studied by means of discrete dislocation dynamics within a multiscale approach. Simulations were carried out using the discrete continuous method in combination with a fast Fourier transform solver to compute the mechanical fields. The original simulation strategy was modified to include straight dislocation segments by means of the field dislocation mechanics method and was applied to simulate the interaction of an edge dislocation with a $θ'$ precipitate in an Al-Cu alloy. It was found that the elastic mismatch has a negligible influence on the dislocation/precipitate interaction in the Al-Cu system. Moreover, the influence of the precipitate aspect ratio and orientation was reasonably well captured by the simple Orowan model in the absence of the stress-free transformation strain. Nevertheless, the introduction of the stress-free transformation strain led to dramatic changes in the dislocation/precipitate interaction and in the critical resolved shear stress to overcome the precipitate, particularly in the case of precipitates with small aspect ratio. The new multiscale approach to study the dislocation/precipitate interactions opens the possibility to obtain quantitative estimations of the strengthening provided by precipitates in metallic alloys taking into account the microstructural details.
△ Less
Submitted 6 June, 2018; v1 submitted 19 May, 2018;
originally announced May 2018.
-
Computational Homogenization of Polycrystals
Authors:
J. Segurado,
R. A. Lebensohn,
J. LLorca
Abstract:
This paper reviews the current state-of-the-art in the simulation of the mechanical behavior of polycrystalline materials by means of computational homogenization. The key ingredients of this modelling strategy are presented in detail starting with the parameters needed to describe polycrystalline microstructures and the digital representation of such microstructures in a suitable format to perfor…
▽ More
This paper reviews the current state-of-the-art in the simulation of the mechanical behavior of polycrystalline materials by means of computational homogenization. The key ingredients of this modelling strategy are presented in detail starting with the parameters needed to describe polycrystalline microstructures and the digital representation of such microstructures in a suitable format to perform computational homogenization. The different crystal plasticity frameworks that can describe the physical mechanisms of deformation in single crystals (dislocation slip and twinning) at the microscopic level are presented next. This is followed by the description of computational homogenization methods based on mean-field approximations by means of the viscoplastic self-consistent approach, or on the full-field simulation of the mechanical response of a representative polycrystalline volume element by means of the finite element method or the fast Fourier transform-based method. Multiscale frameworks based on the combination of mean-field homogenization and the finite element method are presented next to model the plastic deformation of polycrystalline specimens of arbitrary geometry under complex mechanical loading. Examples of application to predict the strength, fatigue life, damage, and texture evolution under different conditions are presented to illustrate the capabilities of the different models. Finally, current challenges and future research directions in this field are summarized.
△ Less
Submitted 22 July, 2018; v1 submitted 7 April, 2018;
originally announced April 2018.
-
Crystal plasticity simulation of the effect of grain size on the fatigue behavior of polycrystalline Inconel 718
Authors:
A. Cruzado,
S. Lucarini,
J. LLorca,
J. Segurado
Abstract:
A microstructure-based model that accounts for the effect of grain size has been developed to study the effect of grain size on the fatigue life of Inconel 718 alloys. The fatigue behavior of two alloys with different grain size was determined by means of uniaxial cyclic deformation tests under fully-reversed deformation ($R_\varepsilon$ = -1) at 400$^\circ$C in the low cycle fatigue regime. The m…
▽ More
A microstructure-based model that accounts for the effect of grain size has been developed to study the effect of grain size on the fatigue life of Inconel 718 alloys. The fatigue behavior of two alloys with different grain size was determined by means of uniaxial cyclic deformation tests under fully-reversed deformation ($R_\varepsilon$ = -1) at 400$^\circ$C in the low cycle fatigue regime. The model was based in the determination of the fatigue indicator parameter (based on the local crystallographic strain energy dissipated per cycle) by means of computational homogenization of a representative volume element of the microstructure. The mechanical response of the single crystal within the polycrystal was modelled through a phenomenological crystal plasticity model which was modified to account for the effect of grain size on the monotonic and cyclic hardening/softening mechanisms. The microstructure-based crack initiation model parameters were calibrated from the experimental tests of the material with fine grain size. The results of the fatigue simulations were in good agreement with the experimental results in terms of the cyclic stress-strain curves and of the number of cycles for fatigue crack initiation. The model did not show any grain size effect on the fatigue life for the largest cyclic strain ranges while the predicted fatigue life predicted was considerably longer in the case of the microstructure with fine grain size for the lowest strain ranges, in quantitative agreement with experimental data. These differences were attributed to changes in the deformation modes between homogeneous plastic deformation at large cyclic strain ranges and localized plasticity in a few grains at low cyclic strain ranges.
△ Less
Submitted 26 April, 2018; v1 submitted 4 April, 2018;
originally announced April 2018.
-
An analysis of the influence of grain size on the strength of FCC polycrystals by means of computational homogenization
Authors:
S. Haouala,
J. Segurado,
J. LLorca
Abstract:
The effect of grain size on the flow stress of FCC polycrystals is analyzed by means of a multiscale strategy based on computational homogenization of the polycrystal aggregate. The mechanical behavior of each crystal is given by a dislocation-based crystal plasticity model in which the critical resolved shear stress follows the Taylor model. The generation and annihilation of dislocations in each…
▽ More
The effect of grain size on the flow stress of FCC polycrystals is analyzed by means of a multiscale strategy based on computational homogenization of the polycrystal aggregate. The mechanical behavior of each crystal is given by a dislocation-based crystal plasticity model in which the critical resolved shear stress follows the Taylor model. The generation and annihilation of dislocations in each slip system during deformation is given by the Kocks-Mecking model, which was modified to account for the dislocation storage at the grain boundaries. Polycrystalline Cu is selected to validate the simulation strategy and all the model parameters are obtained from dislocation dynamics simulations or experiments at lower length scales and the simulation results were in good agreement with experimental data in the literature. The model is applied to explore the influence of different microstructural factors (initial dislocation density, width of the grain size distribution, texture) on the grain size effect. It is found that the initial dislocation density, $ρ_i$, plays a dominant role in the magnitude of the grain size effect and that dependence of flow stress with an inverse power of grain size ($σ_ y -σ_\infty \propto d_g^{-x}$) breaks down for large initial dislocation densities ($> 10^{14}$ m$^{-2}$) and grain sizes $d_g > $ 40 $μ$m in FCC metals. However, it was found that the grain size contribution to the strength followed a power-law function of the dimensionless parameter $d_g\sqrt{ρ_i}$ for small values of the applied strain ($<$ 2 \%), in agreement with previous theoretical considerations for size effects in plasticity.
△ Less
Submitted 16 January, 2018;
originally announced January 2018.
-
Microstructure-based fatigue life model of metallic alloys with bilinear Coffin-Manson behavior
Authors:
A. Cruzado,
S. Lucarini,
J. LLorca,
J. Segurado
Abstract:
A microstructure-based model is presented to predict the fatigue life of polycrystalline metallic alloys which present a bilinear Coffin-Manson relationship. The model is based in the determination of the maximum value of a fatigue indicator parameter obtained from the plastic energy dissipated by cycle in the microstructure. The fatigue indicator parameter was obtained by means of the computation…
▽ More
A microstructure-based model is presented to predict the fatigue life of polycrystalline metallic alloys which present a bilinear Coffin-Manson relationship. The model is based in the determination of the maximum value of a fatigue indicator parameter obtained from the plastic energy dissipated by cycle in the microstructure. The fatigue indicator parameter was obtained by means of the computational homogenization of a representative volume element of the microstructure using a crystal-plasticity finite element model. The microstructure-based model was applied to predict the low cyclic fatigue behavior of IN718 at 400$^\circ$C which exhibits a bilinear Coffin-Manson relationship under the assumption that this behavior is triggered by a transition from highly localized plasticity at low cyclic strain amplitudes to more homogeneous deformation at high cyclic strain amplitudes. The model predictions were in very good agreement with the experimental results for a wide range of cyclic strain amplitudes and two strain ratios ($R_ε$ = 0 and -1) and corroborated the initial hypothesis. Moreover, they provided a micromechanical explanation for the influence of the strain ratio on the fatigue life at low cyclic strain amplitudes.
△ Less
Submitted 6 November, 2017; v1 submitted 20 July, 2017;
originally announced July 2017.
-
A 3D dislocation dynamics analysis of the size effect on the strength of [111] LiF micropillars at 300K and 600K
Authors:
H. -J. Chang,
J. Segurado,
J. M. Molina-Aldareguía,
R. Soler,
J. LLorca
Abstract:
The mechanical behavior in compression of [111] LiF micropillars with diameters in the range 0.5 $μ$m to 2.0 $μ$m was analyzed by means of discrete dislocation dynamics at ambient and elevated temperature. The dislocation velocity was obtained from the Peach-Koehler force acting on the dislocation segments from a thermally-activated model that accounted for the influence of temperature on the latt…
▽ More
The mechanical behavior in compression of [111] LiF micropillars with diameters in the range 0.5 $μ$m to 2.0 $μ$m was analyzed by means of discrete dislocation dynamics at ambient and elevated temperature. The dislocation velocity was obtained from the Peach-Koehler force acting on the dislocation segments from a thermally-activated model that accounted for the influence of temperature on the lattice resistance. A size effect of the type "smaller is stronger" was predicted by the simulations, which was in quantitative agreement with previous experimental results by the authors \cite{SWC14}. The contribution of the different physical deformation mechanisms to the size effect (namely, nucleation of dislocations, dislocation exhaustion and forest hardening) could be ascertained from the simulations and the dominant deformation mode could be assessed as a function of the specimen size and temperature. These results shed light into the complex interaction among size, lattice resistance and dislocation mobility in the mechanical behavior of $μ$m-sized single crystals.
△ Less
Submitted 28 July, 2016;
originally announced July 2016.
-
Three-dimensional investigation of void growth leading to fracture in commercially pure titanium
Authors:
M. Pushkareva,
J. Adrien,
E. Maire,
J. Segurado,
J. Llorca,
A. Weck
Abstract:
The fracture process of commercially pure titanium was visualized in model materials containing artificial holes. These model materials were fabricated using a femtosecond laser coupled with a diffusion bonding technique to obtain voids in the interior of titanium samples. Changes in void dimensions during in-situ straining were recorded in three dimensions using x-ray computed tomography. Void gr…
▽ More
The fracture process of commercially pure titanium was visualized in model materials containing artificial holes. These model materials were fabricated using a femtosecond laser coupled with a diffusion bonding technique to obtain voids in the interior of titanium samples. Changes in void dimensions during in-situ straining were recorded in three dimensions using x-ray computed tomography. Void growth obtained experimentally was compared with the Rice and Tracey model which predicted well the average void growth. A large scatter in void growth data was explained by differences in grain orientation which was confirmed by crystal plasticity simulations. It was also shown that grain orientation has a stronger effect on void growth than intervoid spacing and material strength. Intervoid spacing, however, appears to control whether the intervoid ligament failure is ductile or brittle.
△ Less
Submitted 26 July, 2016;
originally announced July 2016.