-
Protein arrangement on modified diamond-like carbon surfaces - An ARXPS study
Authors:
Reece N. Oosterbeek,
Christopher K. Seal,
Margaret M. Hyland
Abstract:
Understanding the nature of the interface between a biomaterial implant and the biological fluid is an essential step towards creating improved implant materials. This study examined a diamond-like carbon coating biomaterial, the surface energy of which was modified by Ar+ ion sputtering and laser graphitisation. The arrangement of proteins was analysed by angle resolved X-ray photoelectron spectr…
▽ More
Understanding the nature of the interface between a biomaterial implant and the biological fluid is an essential step towards creating improved implant materials. This study examined a diamond-like carbon coating biomaterial, the surface energy of which was modified by Ar+ ion sputtering and laser graphitisation. The arrangement of proteins was analysed by angle resolved X-ray photoelectron spectroscopy, and the effects of the polar component of surface energy on this arrangement were observed. It was seen that polar groups (such as CN, CO) are more attracted to the coating surface due to the stronger polar interactions. This results in a segregation of these groups to the DLC-protein interface; at increasing takeoff angle (further from to DLC-protein interface) fewer of these polar groups are seen. Correspondingly, groups that interact mainly by dispersive forces (CC, CH) were found to increase in intensity as takeoff angle increased, indicating they are segregated away from the DLC-protein interface. The magnitude of the segregation was seen to increase with increasing polar surface energy, this was attributed to an increased net attraction between the solid surface and polar groups at higher polar surface energy.
△ Less
Submitted 15 November, 2016;
originally announced November 2016.
-
Topologically ordered magnesium-biopolymer hybrid composite structures
Authors:
Reece N. Oosterbeek,
Christopher K. Seal,
Mark P. Staiger,
Margaret M. Hyland
Abstract:
Magnesium and its alloys are intriguing as possible biodegradable biomaterials due to their unique combination of biodegradability and high specific mechanical properties. However, uncontrolled biodegradation of magnesium during implantation remains a major challenge in spite of the use of alloying and protective coatings. In this study, a hybrid composite structure of magnesium metal and a biopol…
▽ More
Magnesium and its alloys are intriguing as possible biodegradable biomaterials due to their unique combination of biodegradability and high specific mechanical properties. However, uncontrolled biodegradation of magnesium during implantation remains a major challenge in spite of the use of alloying and protective coatings. In this study, a hybrid composite structure of magnesium metal and a biopolymer was fabricated as an alternative approach to control the corrosion rate of magnesium. A multistep process that combines metal foam production and injection molding was developed to create a hybrid composite structure that is topologically ordered in all three dimensions. Preliminary investigations of the mechanical properties and corrosion behavior exhibited by the hybrid Mg-polymer composite structures suggest a new potential approach to the development of Mg-based biomedical devices.
△ Less
Submitted 15 November, 2016;
originally announced November 2016.
-
Optical Control of Fluorescence through Plasmonic Eigenmode Extinction
Authors:
Xiaoying Xu,
Shih-Che Lin,
Quanshui Li,
Zhili Zhang,
Ilia N. Ivanov,
Yuan Li,
Wenbin Wang,
Baohua Gu,
Zhenyu Zhang,
Chun-Hway Hsueh,
Paul C. Snijders,
Katyayani Seal
Abstract:
We introduce the concept of optical control of the fluorescence yield of CdSe quantum dots through plasmon-induced structural changes in random semicontinuous nanostructured gold films. We demonstrate that the wavelength- and polarization dependent coupling between quantum dots and the semicontinuous films, and thus the fluorescent emission spectrum, can be controlled and significantly increased t…
▽ More
We introduce the concept of optical control of the fluorescence yield of CdSe quantum dots through plasmon-induced structural changes in random semicontinuous nanostructured gold films. We demonstrate that the wavelength- and polarization dependent coupling between quantum dots and the semicontinuous films, and thus the fluorescent emission spectrum, can be controlled and significantly increased through the optical extinction of a selective band of eigenmodes in the films. This optical method of effecting controlled changes in the metal nanostructure allows for versatile functionality in a single sample and opens a pathway to in situ control over the fluorescence spectrum.
△ Less
Submitted 24 September, 2015;
originally announced September 2015.
-
Resolving transitions in the mesoscale domain configuration in VO$_2$ using laser speckle pattern analysis
Authors:
Katyayani Seal,
Amos Sharoni,
Jamie M. Messman,
Bradley S. Lokitz,
Robert W. Shaw,
Ivan K. Schuller,
Paul C. Snijders,
Thomas Z. Ward
Abstract:
The configuration and evolution of coexisting mesoscopic domains with contrasting material properties are critical in creating novel functionality through emergent physical properties. However, current approaches that map the domain structure involve either spatially resolved but protracted scanning probe experiments without real time information on the domain evolution, or time resolved spectrosc…
▽ More
The configuration and evolution of coexisting mesoscopic domains with contrasting material properties are critical in creating novel functionality through emergent physical properties. However, current approaches that map the domain structure involve either spatially resolved but protracted scanning probe experiments without real time information on the domain evolution, or time resolved spectroscopic experiments lacking domain-scale spatial resolution. We demonstrate an elegant experimental technique that bridges these local and global methods, giving access to mesoscale information on domain formation and evolution at time scales orders of magnitude faster than current spatially resolved approaches. Our straightforward analysis of laser speckle patterns across the first order phase transition of VO$_2$ can be generalized to other systems with large scale phase separation and has potential as a powerful method with both spatial and temporal resolution to study phase separation in complex materials.
△ Less
Submitted 9 September, 2014;
originally announced September 2014.
-
In Search of a Taxonomy for Classifying Qualitative Spreadsheet Errors
Authors:
Zbigniew Przasnyski,
Linda Leon,
Kala Chand Seal
Abstract:
Most organizations use large and complex spreadsheets that are embedded in their mission-critical processes and are used for decision-making purposes. Identification of the various types of errors that can be present in these spreadsheets is, therefore, an important control that organizations can use to govern their spreadsheets. In this paper, we propose a taxonomy for categorizing qualitative er…
▽ More
Most organizations use large and complex spreadsheets that are embedded in their mission-critical processes and are used for decision-making purposes. Identification of the various types of errors that can be present in these spreadsheets is, therefore, an important control that organizations can use to govern their spreadsheets. In this paper, we propose a taxonomy for categorizing qualitative errors in spreadsheet models that offers a framework for evaluating the readiness of a spreadsheet model before it is released for use by others in the organization. The classification was developed based on types of qualitative errors identified in the literature and errors committed by end-users in develo** a spreadsheet model for Panko's (1996) "Wall problem". Closer inspection of the errors reveals four logical grou**s of the errors creating four categories of qualitative errors. The usability and limitations of the proposed taxonomy and areas for future extension are discussed.
△ Less
Submitted 29 November, 2011;
originally announced November 2011.
-
Local Probing of Mesoscopic Physics of Ferroelectric Domain Walls
Authors:
Vasudeva Rao Aravind,
A. N. Morozovska,
I. Grinberg,
S. Bhattacharyya,
Y. Li,
S. Jesse,
S. Choudhury,
P. Wu,
K. Seal,
E. A. Eliseev,
S. V. Svechnikov,
D. Lee,
S. R. Phillpot,
L. Q. Chen,
A. M. Rappe,
V. Gopalan,
S. V. Kalinin
Abstract:
Domain wall dynamics in ferroic materials underpins functionality of data storage and information technology devices. Using localized electric field of a scanning probe microscopy tip, we experimentally demonstrate a surprisingly rich range of polarization reversal behaviors in the vicinity of the initially flat 180°ferroelectric domain wall. The nucleation bias is found to increase by an order of…
▽ More
Domain wall dynamics in ferroic materials underpins functionality of data storage and information technology devices. Using localized electric field of a scanning probe microscopy tip, we experimentally demonstrate a surprisingly rich range of polarization reversal behaviors in the vicinity of the initially flat 180°ferroelectric domain wall. The nucleation bias is found to increase by an order of magnitude from a 2D nucleus at the wall to 3D nucleus in the bulk. The wall is thus significantly ferroelectrically softer than the bulk. The wall profoundly affects switching on length scales of the order of micrometers. The mechanism of correlated switching is analyzed using analytical theory and phase-field modeling. The long-range effect is ascribed to wall bending under the influence of a tip bias well below the bulk nucleation field and placed many micrometers away from the wall. These studies provide an experimental link between the macroscopic and mesoscopic physics of domain walls and atomistic models of nucleation.
△ Less
Submitted 6 April, 2010;
originally announced April 2010.
-
Direct Measurement of Periodic Electric Forces in Liquids
Authors:
B. J. Rodriguez,
S. Jesse,
K. Seal,
A. P. Baddorf,
S. V. Kalinin
Abstract:
The electric forces acting on an atomic force microscope tip in solution have been measured using a microelectrochemical cell formed by two periodically biased electrodes. The forces were measured as a function of lift height and bias amplitude and frequency, providing insight into electrostatic interactions in liquids. Real-space map** of the vertical and lateral components of electrostatic f…
▽ More
The electric forces acting on an atomic force microscope tip in solution have been measured using a microelectrochemical cell formed by two periodically biased electrodes. The forces were measured as a function of lift height and bias amplitude and frequency, providing insight into electrostatic interactions in liquids. Real-space map** of the vertical and lateral components of electrostatic forces acting on the tip from the deflection and torsion of the cantilever is demonstrated. This method enables direct probing of electrostatic and convective forces involved in electrophoretic and dielectroforetic self-assembly and electrical tweezer operation in liquid environments.
△ Less
Submitted 31 July, 2007;
originally announced August 2007.
-
Fabrication, Dynamics, and Electrical Properties of Insulated SPM Probes for Electrical and Electromechanical Imaging in Liquids
Authors:
B. J. Rodriguez,
S. Jesse,
K. Seal,
A. P. Baddorf,
S. V. Kalinin,
P. Rack
Abstract:
Insulated cantilever probes with a high aspect ratio conducting apex have been fabricated and their dynamic and electrical properties analyzed. The cantilevers were coated with silicon dioxide and a via was fabricated through the oxide at the tip apex and backfilled with tungsten to create an insulated probe with a conducting tip. The stiffness and Q-factor of the cantilevers increased after the…
▽ More
Insulated cantilever probes with a high aspect ratio conducting apex have been fabricated and their dynamic and electrical properties analyzed. The cantilevers were coated with silicon dioxide and a via was fabricated through the oxide at the tip apex and backfilled with tungsten to create an insulated probe with a conducting tip. The stiffness and Q-factor of the cantilevers increased after the modifications and their resonances shifted to higher frequencies. The coupling strength between the cantilever and the coating are determined. The applications to conductive and electromechanical imaging of ferroelectric domains are illustrated, and a probe apex repair process is demonstrated.
△ Less
Submitted 19 July, 2007;
originally announced July 2007.
-
Towards local electromechanical probing of cellular and biomolecular systems in a liquid environment
Authors:
Sergei V. Kalinin,
Brian J. Rodriguez,
Stephen Jesse,
Katyayani Seal,
Roger Proksch,
Sophia Hohlbauch,
Irene Revenko,
Gary Lee Thompson,
Alexey A. Vertegel
Abstract:
Electromechanical coupling is ubiquitous in biological systems with examples ranging from simple piezoelectricity in calcified and connective tissues to voltage-gated ion channels, energy storage in mitochondria, and electromechanical activity in cardiac myocytes and outer hair cell stereocilia. Piezoresponse force microscopy (PFM) has originally emerged as a technique to study electromechanical…
▽ More
Electromechanical coupling is ubiquitous in biological systems with examples ranging from simple piezoelectricity in calcified and connective tissues to voltage-gated ion channels, energy storage in mitochondria, and electromechanical activity in cardiac myocytes and outer hair cell stereocilia. Piezoresponse force microscopy (PFM) has originally emerged as a technique to study electromechanical phenomena in ferroelectric materials, and in recent years, has been employed to study a broad range of non-ferroelectric polar materials, including piezoelectric biomaterials. At the same time, the technique has been extended from ambient to liquid imaging on model ferroelectric systems. Here, we present results on local electromechanical probing of several model cellular and biomolecular systems, including insulin and lysozyme amyloid fibrils, breast adenocarcinoma cells, and bacteriorhodopsin in a liquid environment. The specific features of SPM operation in liquid are delineated and bottlenecks on the route towards nanometer-resolution electromechanical imaging of biological systems are identified.
△ Less
Submitted 30 April, 2007;
originally announced April 2007.
-
An Approximate Light Cone Method to Investigate Meson Structure
Authors:
Sudip K. Seal,
Matthias Burkardt
Abstract:
To appear in the proceedings of The Phenomenology of Large N(c) QCD, Tempe, Arizona, 9-11 Jan 2002.
To appear in the proceedings of The Phenomenology of Large N(c) QCD, Tempe, Arizona, 9-11 Jan 2002.
△ Less
Submitted 1 April, 2002;
originally announced April 2002.
-
B-Mesons on the Transverse Lattice
Authors:
M. Burkardt,
S. K. Seal
Abstract:
We present results from a first study of $B$-mesons that is based on a transverse lattice formulation of light-front QCD. The shape of the Isgur-Wise form factor is in very good agreement with experimental data. However, the calculations yield rather large values for $f_B$ and $\barΛ$ compared to contemporary calculations based on other techniques.
We present results from a first study of $B$-mesons that is based on a transverse lattice formulation of light-front QCD. The shape of the Isgur-Wise form factor is in very good agreement with experimental data. However, the calculations yield rather large values for $f_B$ and $\barΛ$ compared to contemporary calculations based on other techniques.
△ Less
Submitted 6 December, 2001;
originally announced December 2001.
-
A Study of Heavy-Light Mesons on the Transverse Lattice
Authors:
Matthias Burkardt,
Sudip K. Seal
Abstract:
We present results from a study of meson spectra and structure in the limit where one quark is infinitely heavy. The calculations, based on the framework of light-front QCD formulated on a transverse lattice, are the first non-perturbative studies of B-mesons in light-front QCD. We calculate the Isgur-Wise form factor, light-cone distribution amplitude, the heavy-quark parton distribution functi…
▽ More
We present results from a study of meson spectra and structure in the limit where one quark is infinitely heavy. The calculations, based on the framework of light-front QCD formulated on a transverse lattice, are the first non-perturbative studies of B-mesons in light-front QCD. We calculate the Isgur-Wise form factor, light-cone distribution amplitude, the heavy-quark parton distribution function and the leptonic decay constant of B-mesons.
△ Less
Submitted 28 June, 2001; v1 submitted 13 May, 2001;
originally announced May 2001.
-
A Study of Light Mesons on the Transverse Lattice
Authors:
M. Burkardt,
S. K. Seal
Abstract:
We present results from a study of light meson spectra and structure obtained within the framework of light-front QCD formulated on a transverse lattice. We discuss how imposing Lorentz covariance conditions on meson dispersion relations allows determination of parameters in the transverse lattice Hamiltonian. The pion distribution amplitude obtained in this framework is rather close to its asym…
▽ More
We present results from a study of light meson spectra and structure obtained within the framework of light-front QCD formulated on a transverse lattice. We discuss how imposing Lorentz covariance conditions on meson dispersion relations allows determination of parameters in the transverse lattice Hamiltonian. The pion distribution amplitude obtained in this framework is rather close to its asymptotic shape.
△ Less
Submitted 30 June, 2001; v1 submitted 20 February, 2001;
originally announced February 2001.