-
The positioning of stress fibers in contractile cells minimizes internal mechanical stress
Authors:
Lukas Riedel,
Valentin Wössner,
Dominic Kempf,
Falko Ziebert,
Peter Bastian,
Ulrich S. Schwarz
Abstract:
The mechanics of animal cells is strongly determined by stress fibers, which are contractile filament bundles that form dynamically in response to extracellular cues. Stress fibers allow the cell to adapt its mechanics to environmental conditions and to protect it from structural damage. While the physical description of single stress fibers is well-developed, much less is known about their spatia…
▽ More
The mechanics of animal cells is strongly determined by stress fibers, which are contractile filament bundles that form dynamically in response to extracellular cues. Stress fibers allow the cell to adapt its mechanics to environmental conditions and to protect it from structural damage. While the physical description of single stress fibers is well-developed, much less is known about their spatial distribution on the level of whole cells. Here, we combine a finite element method for one-dimensional fibers embedded in an elastic bulk medium with dynamical rules for stress fiber formation based on genetic algorithms. We postulate that their main goal is to achieve minimal mechanical stress in the bulk material with as few fibers as possible. The fiber positions and configurations resulting from this optimization task alone are in good agreement with those found in experiments where cells in 3D-scaffolds were mechanically strained at one attachment point. For optimized configurations, we find that stress fibers typically run through the cell in a diagonal fashion, similar to reinforcement strategies used for composite material.
△ Less
Submitted 10 July, 2024;
originally announced July 2024.
-
Active gel model for one-dimensional cell migration coupling actin flow and adhesion dynamics
Authors:
Valentin Wössner,
Oliver M. Drozdowski,
Falko Ziebert,
Ulrich S. Schwarz
Abstract:
Migration of animal cells is based on the interplay between actin polymerization at the front, adhesion along the cell-substrate interface, and actomyosin contractility at the back. Active gel theory has been used before to demonstrate that actomyosin contractility is sufficient for polarization and self-sustained cell migration in the absence of external cues, but did not consider the dynamics of…
▽ More
Migration of animal cells is based on the interplay between actin polymerization at the front, adhesion along the cell-substrate interface, and actomyosin contractility at the back. Active gel theory has been used before to demonstrate that actomyosin contractility is sufficient for polarization and self-sustained cell migration in the absence of external cues, but did not consider the dynamics of adhesion. Likewise, migration models based on the mechanosensitive dynamics of adhesion receptors usually do not include the global dynamics of intracellular flow. Here we show that both aspects can be combined in a minimal active gel model for one-dimensional cell migration with dynamic adhesion. This model demonstrates that load sharing between the adhesion receptors leads to symmetry breaking, with stronger adhesion at the front, and that bistability of migration arises for intermediate adhesiveness. Local variations in adhesiveness are sufficient to switch between sessile and motile states, in qualitative agreement with experiments.
△ Less
Submitted 9 July, 2024; v1 submitted 27 May, 2024;
originally announced May 2024.
-
Coat stiffening explains the consensus pathway of clathrin-mediated endocytosis
Authors:
Felix Frey,
Ulrich S. Schwarz
Abstract:
Clathrin-mediated endocytosis is the main pathway used by eukaryotic cells to take up extracellular material, but the dominant physical mechanisms driving this process are still elusive. Recently several high-resolution imaging techniques have been used on different cell lines to measure the geometrical properties of clathrin-coated pits over their whole lifetime. Here we first show that all datas…
▽ More
Clathrin-mediated endocytosis is the main pathway used by eukaryotic cells to take up extracellular material, but the dominant physical mechanisms driving this process are still elusive. Recently several high-resolution imaging techniques have been used on different cell lines to measure the geometrical properties of clathrin-coated pits over their whole lifetime. Here we first show that all datasets follow the same consensus pathway, which is well described by the recently introduced cooperative curvature model, which predicts a flat-to curved transition at finite area, followed by linear growth and subsequent saturation of curvature. We then apply an energetic model for the composite of plasma membrane and clathrin coat to the consensus pathway to show that the dominant mechanism for invagination is coat stiffening, which results from cooperative interactions between the different clathrin molecules and progressively drives the system towards its intrinsic curvature. Our theory predicts that two length scales determine the time course of invagination, namely the patch size at which the flat-to-curved transition occurs and the final pit radius.
△ Less
Submitted 5 May, 2024;
originally announced May 2024.
-
The generic temperature response of large biochemical networks
Authors:
Julian B. Voits,
Ulrich S. Schwarz
Abstract:
Biological systems are remarkably susceptible to relatively small temperature changes. The most obvious example is fever, when a modest rise in body temperature of only few Kelvin has strong effects on our immune system and how it fights pathogens. Another very important example is climate change, when even smaller temperature changes lead to dramatic shifts in ecosystems. Although it is generally…
▽ More
Biological systems are remarkably susceptible to relatively small temperature changes. The most obvious example is fever, when a modest rise in body temperature of only few Kelvin has strong effects on our immune system and how it fights pathogens. Another very important example is climate change, when even smaller temperature changes lead to dramatic shifts in ecosystems. Although it is generally accepted that the main effect of an increase in temperature is the acceleration of biochemical reactions according to the Arrhenius equation, it is not clear how it effects large biochemical networks with complicated architectures. For developmental systems like fly and frog, it has been shown that the system response to temperature deviates in a characteristic manner from the linear Arrhenius plot of single reactions, but a rigorous explanation has not been given yet. Here we use a graph theoretical interpretation of the mean first passage times of a biochemical master equation to give a statistical description. We find that in the limit of large system size and if the network has a bias towards a target state, then the Arrhenius plot is generically quadratic, in excellent agreement with experimental data for developmental times in fly and frog.
△ Less
Submitted 25 March, 2024;
originally announced March 2024.
-
Morphological instability at topological defects in a three-dimensional vertex model for spherical epithelia
Authors:
Oliver M. Drozdowski,
Ulrich S. Schwarz
Abstract:
Epithelial monolayers are a central building block of complex organisms. Topological defects have emerged as important elements for single cell behavior in flat epithelia. Here we theoretically study such defects in a three-dimensional vertex model for spherical epithelia like cysts or intestinal organoids. We find that they lead to the same generic morphological instability to an icosahedral shap…
▽ More
Epithelial monolayers are a central building block of complex organisms. Topological defects have emerged as important elements for single cell behavior in flat epithelia. Here we theoretically study such defects in a three-dimensional vertex model for spherical epithelia like cysts or intestinal organoids. We find that they lead to the same generic morphological instability to an icosahedral shape as it is known from spherical elastic shells like virus capsids, polymerized vesicles or buckyballs. We derive analytical expressions for the effective stretching and bending moduli as a function of the parameters of the vertex model, in excellent agreement with computer simulations. These equations accurately predict both the buckling of a flat epithelial monolayer under uniaxial compression and the faceting transition around the topological defects in spherical epithelia. We further show that localized apico-basal tension asymmetries allow them to reduce the transition threshold to small system sizes.
△ Less
Submitted 13 March, 2024;
originally announced March 2024.
-
Transferring facade labels between point clouds with semantic octrees while considering change detection
Authors:
Sophia Schwarz,
Tanja Pilz,
Olaf Wysocki,
Ludwig Hoegner,
Uwe Stilla
Abstract:
Point clouds and high-resolution 3D data have become increasingly important in various fields, including surveying, construction, and virtual reality. However, simply having this data is not enough; to extract useful information, semantic labeling is crucial. In this context, we propose a method to transfer annotations from a labeled to an unlabeled point cloud using an octree structure. The struc…
▽ More
Point clouds and high-resolution 3D data have become increasingly important in various fields, including surveying, construction, and virtual reality. However, simply having this data is not enough; to extract useful information, semantic labeling is crucial. In this context, we propose a method to transfer annotations from a labeled to an unlabeled point cloud using an octree structure. The structure also analyses changes between the point clouds. Our experiments confirm that our method effectively transfers annotations while addressing changes. The primary contribution of this project is the development of the method for automatic label transfer between two different point clouds that represent the same real-world object. The proposed method can be of great importance for data-driven deep learning algorithms as it can also allow circumventing stochastic transfer learning by deterministic label transfer between datasets depicting the same objects.
△ Less
Submitted 9 February, 2024;
originally announced February 2024.
-
Precision Mass Measurement of Proton-Dripline Halo Candidate $^{22}$Al
Authors:
S. E. Campbell,
G. Bollen,
B. A. Brown,
A. Dockery,
K. Fossez,
C. M. Ireland,
K. Minamisono,
D. Puentes,
A. Ortiz-Cortez,
B. J. Rickey,
R. Ringle,
S. Schwarz,
C. S. Sumithrarachchi,
A. C. C. Villari,
I. T. Yandow
Abstract:
We report the first mass measurement of the proton-halo candidate $^{22}$Al performed with the LEBIT facility's 9.4~T Penning trap mass spectrometer at FRIB. This measurement completes the mass information for the lightest remaining proton-dripline nucleus achievable with Penning traps. $^{22}$Al has been the subject of recent interest regarding a possible halo structure from the observation of an…
▽ More
We report the first mass measurement of the proton-halo candidate $^{22}$Al performed with the LEBIT facility's 9.4~T Penning trap mass spectrometer at FRIB. This measurement completes the mass information for the lightest remaining proton-dripline nucleus achievable with Penning traps. $^{22}$Al has been the subject of recent interest regarding a possible halo structure from the observation of an exceptionally large isospin asymmetry [Phys. Rev. Lett. \textbf{125} 192503 (2020)]. The measured mass excess value of $\text{ME}=18\;093.6(7)$~keV, corresponding to an exceptionally small proton separation energy of $S_p = 99.2(1.0)$~keV, is compatible with the suggested halo structure. Our result agrees well with predictions from \textit{sd}-shell USD Hamiltonians. While USD Hamiltonians predict deformation in $^{22}$Al ground-state with minimal $1s_{1/2}$ occupation in the proton shell, a particle-plus-rotor model in the continuum suggests that a proton halo could form at large quadrupole deformation. These results emphasize the need for a charge radius measurement to conclusively determine the halo nature.
△ Less
Submitted 18 December, 2023;
originally announced December 2023.
-
Sub-Riemannian Random Walks: From Connections to Retractions
Authors:
Michael Herrmann,
Pit Neumann,
Simon Schwarz,
Anja Sturm,
Max Wardetzky
Abstract:
We study random walks on sub-Riemannian manifolds using the framework of retractions, i.e., approximations of normal geodesics. We show that such walks converge to the correct horizontal Brownian motion if normal geodesics are approximated to at least second order. In particular, we (i) provide conditions for convergence of geodesic random walks defined with respect to normal, compatible, and part…
▽ More
We study random walks on sub-Riemannian manifolds using the framework of retractions, i.e., approximations of normal geodesics. We show that such walks converge to the correct horizontal Brownian motion if normal geodesics are approximated to at least second order. In particular, we (i) provide conditions for convergence of geodesic random walks defined with respect to normal, compatible, and partial connections and (ii) provide examples of computationally efficient retractions, e.g., for simulating anisotropic Brownian motion on Riemannian manifolds.
△ Less
Submitted 28 November, 2023;
originally announced November 2023.
-
You Cannot Escape Me: Detecting Evasions of SIEM Rules in Enterprise Networks
Authors:
Rafael Uetz,
Marco Herzog,
Louis Hackländer,
Simon Schwarz,
Martin Henze
Abstract:
Cyberattacks have grown into a major risk for organizations, with common consequences being data theft, sabotage, and extortion. Since preventive measures do not suffice to repel attacks, timely detection of successful intruders is crucial to stop them from reaching their final goals. For this purpose, many organizations utilize Security Information and Event Management (SIEM) systems to centrally…
▽ More
Cyberattacks have grown into a major risk for organizations, with common consequences being data theft, sabotage, and extortion. Since preventive measures do not suffice to repel attacks, timely detection of successful intruders is crucial to stop them from reaching their final goals. For this purpose, many organizations utilize Security Information and Event Management (SIEM) systems to centrally collect security-related events and scan them for attack indicators using expert-written detection rules. However, as we show by analyzing a set of widespread SIEM detection rules, adversaries can evade almost half of them easily, allowing them to perform common malicious actions within an enterprise network without being detected. To remedy these critical detection blind spots, we propose the idea of adaptive misuse detection, which utilizes machine learning to compare incoming events to SIEM rules on the one hand and known-benign events on the other hand to discover successful evasions. Based on this idea, we present AMIDES, an open-source proof-of-concept adaptive misuse detection system. Using four weeks of SIEM events from a large enterprise network and more than 500 hand-crafted evasions, we show that AMIDES successfully detects a majority of these evasions without any false alerts. In addition, AMIDES eases alert analysis by assessing which rules were evaded. Its computational efficiency qualifies AMIDES for real-world operation and hence enables organizations to significantly reduce detection blind spots with moderate effort.
△ Less
Submitted 19 December, 2023; v1 submitted 16 November, 2023;
originally announced November 2023.
-
Channel Estimation for mmWave MIMO using sub-6 GHz Out-of-Band Information
Authors:
Faruk Pasic,
Markus Hofer,
Mariam Mussbah,
Sebastian Caban,
Stefan Schwarz,
Thomas Zemen,
Christoph F. Mecklenbräuker
Abstract:
Future wireless multiple-input multiple-output (MIMO) communication systems will employ sub-6 GHz and millimeter wave (mmWave) frequency bands working cooperatively. Establishing a MIMO communication link usually relies on estimating channel state information (CSI) which is difficult to acquire at mmWave frequencies due to a low signal-to-noise ratio (SNR). In this paper, we propose three novel me…
▽ More
Future wireless multiple-input multiple-output (MIMO) communication systems will employ sub-6 GHz and millimeter wave (mmWave) frequency bands working cooperatively. Establishing a MIMO communication link usually relies on estimating channel state information (CSI) which is difficult to acquire at mmWave frequencies due to a low signal-to-noise ratio (SNR). In this paper, we propose three novel methods to estimate mmWave MIMO channels using out-of-band information obtained from the sub-6GHz band. We compare the proposed channel estimation methods with a conventional one utilizing only in-band information. Simulation results show that the proposed methods outperform the conventional mmWave channel estimation method in terms of achievable spectral efficiency, especially at low SNR and high K-factor.
△ Less
Submitted 6 July, 2024; v1 submitted 15 November, 2023;
originally announced November 2023.
-
The role of the nucleus for cell mechanics: an elastic phase field approach
Authors:
Robert Chojowski,
Ulrich S. Schwarz,
Falko Ziebert
Abstract:
The nucleus of eukaryotic cells typically makes up around 30% of the cell volume and has significantly different mechanics, which can make it effectively up to ten times stiffer than the surrounding cytoplasm. Therefore it is an important element for cell mechanics, but a quantitative understanding of its mechanical role during whole cell dynamics is largely missing. Here we demonstrate that elast…
▽ More
The nucleus of eukaryotic cells typically makes up around 30% of the cell volume and has significantly different mechanics, which can make it effectively up to ten times stiffer than the surrounding cytoplasm. Therefore it is an important element for cell mechanics, but a quantitative understanding of its mechanical role during whole cell dynamics is largely missing. Here we demonstrate that elastic phase fields can be used to describe dynamical cell processes in adhesive or confining environments in which the nucleus acts as a stiff inclusion. We first introduce and verify our computational method and then study several applications of large relevance. For cells on adhesive patterns, we find that nuclear stress is shielded by the adhesive pattern. For cell compression between two parallel plates, we obtain force-compression curves that allow us to extract an effective modulus for the cell-nucleus composite. For micropipette aspiration, the effect of the nucleus on the effective modulus is found to be much weaker, highlighting the complicated interplay between extracellular geometry and cell mechanics that is captured by our approach. We also show that our phase field approach can be used to investigate the effects of viscoelasticity and cortical tension.
△ Less
Submitted 26 March, 2024; v1 submitted 22 September, 2023;
originally announced September 2023.
-
First direct $^{7}$Be electron capture $Q$-value measurement towards high-precision BSM neutrino physics searches
Authors:
R. Bhandari,
G. Bollen,
T. Brunner,
N. D. Gamage,
A. Hamaker,
Z. Hockenbery,
M. Horana Gamage,
D. K. Keblbeck,
K. G. Leach,
D. Puentes,
M. Redshaw,
R. Ringle,
S. Schwarz,
C. S. Sumithrarachchi,
I. Yandow
Abstract:
We report the first direct measurement of the nuclear electron capture (EC) decay $Q$-value of $^{7}$Be $\rightarrow$ $^{7}$Li via high-precision Penning trap mass spectrometry (PTMS). This was performed using the LEBIT Penning trap located at the National Superconducting Cyclotron Laboratory/Facility for Rare Isotope Beams (NSCL/FRIB) using the newly commissioned Batch-Mode Ion-Source (BMIS) to d…
▽ More
We report the first direct measurement of the nuclear electron capture (EC) decay $Q$-value of $^{7}$Be $\rightarrow$ $^{7}$Li via high-precision Penning trap mass spectrometry (PTMS). This was performed using the LEBIT Penning trap located at the National Superconducting Cyclotron Laboratory/Facility for Rare Isotope Beams (NSCL/FRIB) using the newly commissioned Batch-Mode Ion-Source (BMIS) to deliver the unstable $^{7}$Be$^{+}$ samples. With a measured value of $Q_{EC}$ = 861.963(23) keV this result is also three times more precise than any previous determination of this quantity. This improved precision, and accuracy of the $^7$Be EC decay $Q$-value is critical for ongoing experiments that measure the recoiling nucleus in this system as a signature to search for beyond Standard Model (BSM) neutrino physics using $^7$Be-doped superconducting sensors.
△ Less
Submitted 18 January, 2024; v1 submitted 25 August, 2023;
originally announced August 2023.
-
Towards Self-organizing Personal Knowledge Assistants in Evolving Corporate Memories
Authors:
Christian Jilek,
Markus Schröder,
Heiko Maus,
Sven Schwarz,
Andreas Dengel
Abstract:
This paper presents a retrospective overview of a decade of research in our department towards self-organizing personal knowledge assistants in evolving corporate memories. Our research is typically inspired by real-world problems and often conducted in interdisciplinary collaborations with research and industry partners. We summarize past experiments and results comprising topics like various way…
▽ More
This paper presents a retrospective overview of a decade of research in our department towards self-organizing personal knowledge assistants in evolving corporate memories. Our research is typically inspired by real-world problems and often conducted in interdisciplinary collaborations with research and industry partners. We summarize past experiments and results comprising topics like various ways of knowledge graph construction in corporate and personal settings, Managed Forgetting and (Self-organizing) Context Spaces as a novel approach to Personal Information Management (PIM) and knowledge work support. Past results are complemented by an overview of related work and some of our latest findings not published so far. Last, we give an overview of our related industry use cases including a detailed look into CoMem, a Corporate Memory based on our presented research already in productive use and providing challenges for further research. Many contributions are only first steps in new directions with still a lot of untapped potential, especially with regard to further increasing the automation in PIM and knowledge work support.
△ Less
Submitted 3 August, 2023;
originally announced August 2023.
-
Super Riemann surfaces and fatgraphs
Authors:
Albert S. Schwarz,
Anton M. Zeitlin
Abstract:
Our goal is to describe superconformal structures on super Riemann surfaces (SRS), based on data assigned to a fatgraph. We start from the complex structures on punctured $(1|1)$-supermanifolds, characterizing the corresponding moduli and the deformations using Strebel differentials and certain Čech cocycles for a specific covering, which we reproduce from a fatgraph data, consisting of $U(1)$-gra…
▽ More
Our goal is to describe superconformal structures on super Riemann surfaces (SRS), based on data assigned to a fatgraph. We start from the complex structures on punctured $(1|1)$-supermanifolds, characterizing the corresponding moduli and the deformations using Strebel differentials and certain Čech cocycles for a specific covering, which we reproduce from a fatgraph data, consisting of $U(1)$-graph connection and odd parameters at the vertices. Then we consider dual $(1|1)$-supermanifolds and related superconformal structures for $N=2$ super Riemann surfaces. The superconformal structures $N=1$ SRS are computed as the fixed points of involution on supermoduli space of $N=2$ SRS.
△ Less
Submitted 23 September, 2023; v1 submitted 5 July, 2023;
originally announced July 2023.
-
Mass Measurement of $^{27}$P to Constrain Type-I X-ray Burst Models and Validate the IMME for the A=27, T=$\frac{3}{2}$ Isospin Quartet
Authors:
I. T. Yandow,
A. Abdullah-Smoot,
G. Bollen,
A. Hamaker,
C. R. Nicoloff,
D. Puentes,
M. Redshaw,
K. Gulyuz,
Z. Meisel,
W. -J. Ong,
R. Ringle,
R. Sandler,
S. Schwarz,
C. S. Sumithrarachchi,
A. A. Valverde
Abstract:
Light curves are the primary observable of type-I x-ray bursts. Computational x-ray burst models must match simulations to observed light curves. Most of the error in simulated curves comes from uncertainties in $rp$ process reaction rates, which can be reduced via precision mass measurements of neutron-deficient isotopes in the $rp$ process path.
We perform a precise Penning trap mass measureme…
▽ More
Light curves are the primary observable of type-I x-ray bursts. Computational x-ray burst models must match simulations to observed light curves. Most of the error in simulated curves comes from uncertainties in $rp$ process reaction rates, which can be reduced via precision mass measurements of neutron-deficient isotopes in the $rp$ process path.
We perform a precise Penning trap mass measurement of $^{27}$P utilizing the ToF-ICR technique. We use this measurement to calculate $rp$ process reaction rates and input these rates into an x-ray burst model to reduce simulated light curve uncertainty. We also use the mass measurement of $^{27}$P to validate the Isobaric Multiplet Mass Equation (IMME) for the A=27 T=$\frac{3}{2}$ isospin quartet which $^{27}$P belongs to.
The mass excess of $^{27}$P was measured to be -670.7(6) keV, a fourteen-fold precision increase over the mass reported in the 2020 Atomic Mass Evaluation (AME2020). X-ray burst light curves were produced with the MESA (Modules for Experiments in Stellar Astrophysics) code using the new mass and associated reaction rates. Changes in the mass of $^{27}$P seem to have minimal effect on light curves, even in burster systems tailored to maximize impact.
The mass of $^{27}$P does not play a significant role in x-ray burst light curves. It is important to understand that more advanced models do not just provide more precise results, but often qualitatively different ones. This result brings us a step closer to extracting stellar parameters from individual x-ray burst observations. The IMME has been validated for the $A=27, T=3/2$ quartet. The normal quadratic form of the IMME using the latest data yields a reduced $χ^2$ of 2.9. The cubic term required to generate an exact fit to the latest data matches theoretical attempts to predict this term.
△ Less
Submitted 1 November, 2023; v1 submitted 16 June, 2023;
originally announced June 2023.
-
Ultrafast Measurement of Energy-Time Entanglement with an Optical Kerr Shutter
Authors:
Andrew R. Cameron,
Kate L. Fenwick,
Sandra W. L. Cheng,
Sacha Schwarz,
Benjamin MacLellan,
Philip J. Bustard,
Duncan England,
Benjamin Sussman,
Kevin J. Resch
Abstract:
Recent experimental progress in quantum optics has enabled measurement of single photons on ultrafast timescales, beyond the resolution limit of single photon detectors. The energy-time degree of freedom has emerged as a promising avenue for quantum technologies, as entanglement between the frequency and temporal properties of two photons can be fully explored and utilized. Here, we implement opti…
▽ More
Recent experimental progress in quantum optics has enabled measurement of single photons on ultrafast timescales, beyond the resolution limit of single photon detectors. The energy-time degree of freedom has emerged as a promising avenue for quantum technologies, as entanglement between the frequency and temporal properties of two photons can be fully explored and utilized. Here, we implement optical Kerr shutters in single mode fibers to map out the sub-picosecond correlations of energy-time entangled photon pairs. These measurements, in addition to joint spectral measurements of the photon pair state, are used to verify entanglement by means of the violation of a time-bandwidth inequality.
△ Less
Submitted 23 May, 2023;
originally announced May 2023.
-
Large-Scale Collaborative Writing: Technical Challenges and Recommendations
Authors:
Markus Hofbauer,
Christoph Bachhuber,
Christopher Kuhn,
Sebastian Schwarz,
Bart Kroon,
Eckehard Steinbach
Abstract:
Collaborative writing is essential for teams that create documents together. Creating documents in large-scale collaborations is a challenging task that requires an efficient workflow. The design of such a workflow has received comparatively little attention. Conventional solutions such as working on a single Microsoft Word document or a shared online document are still widely used. In this paper,…
▽ More
Collaborative writing is essential for teams that create documents together. Creating documents in large-scale collaborations is a challenging task that requires an efficient workflow. The design of such a workflow has received comparatively little attention. Conventional solutions such as working on a single Microsoft Word document or a shared online document are still widely used. In this paper, we propose a new workflow consisting of a combination of the lightweight markup language AsciiDoc together with the state-of-the-art version control system Git. The proposed process makes use of well-established workflows in the field of software development that have grown over decades. We present a detailed comparison of the proposed markup + Git workflow to Word and Word for the Web as the most prominent examples for conventional approaches.We argue that the proposed approach provides significant benefits regarding scalability, flexibility, and structuring of most collaborative writing tasks, both in academia and industry.
△ Less
Submitted 17 March, 2023;
originally announced March 2023.
-
Light-controllable hybrid aligning layer based on LIPSS on sapphire surface and PVCN-F film
Authors:
I. Gvozdovskyy,
D. Bratova,
Z. Kazantseva,
S. Malyuta,
P. Lytvyn,
S. Schwarz,
R. Hellmann
Abstract:
The creation of aligning layers for the uniform orientation of liquid crystals is significant for both research and the application of liquid crystals. For all applications, the creation of aligning layers possessing controllable characteristics such as azimuthal and polar anchoring energies, easy-axis of director alignment and pre-tilt angle, in the same way as it is achieved by using photoaligni…
▽ More
The creation of aligning layers for the uniform orientation of liquid crystals is significant for both research and the application of liquid crystals. For all applications, the creation of aligning layers possessing controllable characteristics such as azimuthal and polar anchoring energies, easy-axis of director alignment and pre-tilt angle, in the same way as it is achieved by using photoaligning layers processed by light, is very important. Here, aligning properties of hybrid aligning layers created on the basis of sapphire surfaces additionally coated by photoaligning layer of PVCN-F are studied. These hybrid layers possess the properties of the nano-structured sapphire layer and the photosensitive PVCN-F layer, and complement each other. The irradiation time dependence of the azimuthal anchoring energy of the hybrid layers is studied. By using certain experimental conditions during irradiation of hybrid layers, e.g., polarisation of light and irradiation time, a minimum value of the azimuthal anchoring energy, close to zero, was obtained. Atomic force microscope studies of the irradiated hybrid layers were also carried out. It was found that the behavior of the contact angle of nematic droplets placed on treated sapphire surfaces are in good agreement with properties of hybrid aligning layers and parameters of structuring surface obtained from AFM images.
△ Less
Submitted 12 July, 2023; v1 submitted 3 March, 2023;
originally announced March 2023.
-
Self-Supervised and Invariant Representations for Wireless Localization
Authors:
Artan Salihu,
Stefan Schwarz,
Markus Rupp
Abstract:
In this work, we present a wireless localization method that operates on self-supervised and unlabeled channel estimates. Our self-supervising method learns general-purpose channel features robust to fading and system impairments. Learned representations are easily transferable to new environments and ready to use for other wireless downstream tasks. To the best of our knowledge, the proposed meth…
▽ More
In this work, we present a wireless localization method that operates on self-supervised and unlabeled channel estimates. Our self-supervising method learns general-purpose channel features robust to fading and system impairments. Learned representations are easily transferable to new environments and ready to use for other wireless downstream tasks. To the best of our knowledge, the proposed method is the first joint-embedding self-supervised approach to forsake the dependency on contrastive channel estimates. Our approach outperforms fully-supervised techniques in small data regimes under fine-tuning and, in some cases, linear evaluation. We assess the performance in centralized and distributed massive MIMO systems for multiple datasets. Moreover, our method works indoors and outdoors without additional assumptions or design changes.
△ Less
Submitted 14 February, 2023;
originally announced February 2023.
-
SCL(FOL) Revisited
Authors:
Martin Bromberger,
Simon Schwarz,
Christoph Weidenbach
Abstract:
This paper presents an up-to-date and refined version of the SCL calculus for first-order logic without equality. The refinement mainly consists of the following two parts: First, we incorporate a stronger notion of regularity into SCL(FOL). Our regularity definition is adapted from the SCL(T) calculus. This adapted definition guarantees non-redundant clause learning during a run of SCL. However,…
▽ More
This paper presents an up-to-date and refined version of the SCL calculus for first-order logic without equality. The refinement mainly consists of the following two parts: First, we incorporate a stronger notion of regularity into SCL(FOL). Our regularity definition is adapted from the SCL(T) calculus. This adapted definition guarantees non-redundant clause learning during a run of SCL. However, in contrast to the original presentation, it does not require exhaustive propagation. Second, we introduce trail and model bounding to achieve termination guarantees. In previous versions, no termination guarantees about SCL were achieved. Last, we give rigorous proofs for soundness, completeness and clause learning guarantees of SCL(FOL) and put SCL(FOL) into context of existing first-order calculi.
△ Less
Submitted 19 March, 2024; v1 submitted 12 February, 2023;
originally announced February 2023.
-
Heat kernel asymptotics for scaling limits of isoradial graphs
Authors:
Simon Schwarz,
Anja Sturm,
Max Wardetzky
Abstract:
We consider the asymptotics of the discrete heat kernel on isoradial graphs for the case where the time and the edge lengths tend to zero simultaneously. Depending on the asymptotic ratio between time and edge lengths, we show that two different regimes arise: (i) a Gaussian regime and (ii) a Poissonian regime, which resemble the short-time asymptotics of the heat kernel on (i) Euclidean spaces an…
▽ More
We consider the asymptotics of the discrete heat kernel on isoradial graphs for the case where the time and the edge lengths tend to zero simultaneously. Depending on the asymptotic ratio between time and edge lengths, we show that two different regimes arise: (i) a Gaussian regime and (ii) a Poissonian regime, which resemble the short-time asymptotics of the heat kernel on (i) Euclidean spaces and (ii) graphs, respectively.
△ Less
Submitted 23 January, 2024; v1 submitted 17 January, 2023;
originally announced January 2023.
-
An Obstruction Theory for the Existence of Maurer-Cartan Elements in curved $L_\infty$-algebras and an Application in Intrinsic Formality of $P_\infty$-Algebras
Authors:
Silvan Schwarz
Abstract:
Let $\mathfrak{g}$ be a curved $L_\infty$-algebra endowed with a complete filtration $\mathfrak{F}\mathfrak{g}$. Suppose there exists an integer $r \in \mathbb{N}_0$ for which the curvature $μ_0$ satisfies $μ_0 \in \mathfrak{F}_{2r+1} \mathfrak{g}$ and the spectral sequence yields $E_{r+1}^{p,q} =0$ for $p,q$ with $p+q=2$. We prove that then a Maurer-Cartan element exists. In addition, we show, as…
▽ More
Let $\mathfrak{g}$ be a curved $L_\infty$-algebra endowed with a complete filtration $\mathfrak{F}\mathfrak{g}$. Suppose there exists an integer $r \in \mathbb{N}_0$ for which the curvature $μ_0$ satisfies $μ_0 \in \mathfrak{F}_{2r+1} \mathfrak{g}$ and the spectral sequence yields $E_{r+1}^{p,q} =0$ for $p,q$ with $p+q=2$. We prove that then a Maurer-Cartan element exists. In addition, we show, as a typical application, that for $P$ a possibly inhomogeneous Koszul operad with generating set in arities 1,2 (e.g. $P$=Com,As,BV,Lie,Ger), a $P_\infty$-algebra $A$ is intrinsically formal if its twisted deformation complex $\mathrm{Def}(H(A)\stackrel{\mathrm{id}}{\to} H(A))$ is acyclic in total degree 1.
△ Less
Submitted 30 September, 2022;
originally announced September 2022.
-
Identification of a potential ultra-low Q value electron capture decay branch in $^{75}$Se via a precise Penning trap measurement of the mass of $^{75}$As
Authors:
M. Horana Gamage,
R. Bhandari,
G. Bollen,
N. D. Gamage,
A. Hamaker,
D. Puentes,
M. Redshaw,
R. Ringle,
S. Schwarz,
C. S. Sumithrarachchi,
I. Yandow
Abstract:
Background: Low energy $β$ and electron capture (EC) decays are important systems in neutrino mass determination experiments. An isotope with an ultra-low Q value $β$-decay to an excited state in the daughter with Qes < 1 keV could provide a promising alternative candidate for future experiments. $^{75}$Se EC and $^{75}$Ge $β$-decay represent such candidates, but a more precise determination of th…
▽ More
Background: Low energy $β$ and electron capture (EC) decays are important systems in neutrino mass determination experiments. An isotope with an ultra-low Q value $β$-decay to an excited state in the daughter with Qes < 1 keV could provide a promising alternative candidate for future experiments. $^{75}$Se EC and $^{75}$Ge $β$-decay represent such candidates, but a more precise determination of the mass of the common daughter, $^{75}$As, is required to evaluate whether their potential decay branches are energetically allowed and ultra-low. Purpose: Perform a precise atomic mass measurement of $^{75}$As and combine the result with the precisely known atomic masses of $^{75}$Se and $^{75}$Ge, along with nuclear energy level data for $^{75}$As to evaluate potential ultra-low Q value decay branches in the EC decay of $^{75}$Se and the $β$-decay of $^{75}$Ge. Method: The LEBIT Penning trap mass spectrometer at the Facility for Rare Isotope Beams was used to perform a high-precision measurement of the atomic mass of $^{75}$As via cyclotron frequency ratio measurements of $^{75}$As$^{+}$ to a $^{12}$C$_{6}^{+}$ reference ion. Results: The $^{75}$As mass excess was determined to be ME($^{75}$As)= -73 035.98(43) keV, from which the ground-state to ground-state Q values for $^{75}$Se EC and $^{75}$Ge $β$-decay were determined to be 866.50(44) keV and 1179.01(44) keV, respectively. These results were compared to energies of excited states in $^{75}$As at 865.4(5) keV and 1172.0(6) keV to determine Q values of 1.1(7) keV and 7.0(7) keV for the potential ultra-low EC and $β$-decay branches of $^{75}$Se and $^{75}$Ge, respectively. Conclusion: The $^{75}$Se EC decay to the 865.4 keV excited state in $^{75}$As is potentially ultra-low with Qes $\approx$ 1 keV. However, a more precise determination of the 865.4(5) keV level in $^{75}$As is required.
△ Less
Submitted 23 August, 2022;
originally announced August 2022.
-
Computational and experimental analysis of the impact of a sphere on a beam and the resulting modal energy distribution
Authors:
Felix Gehr,
Timo Theurich,
Carlo Monjaraz-Tec,
Johann Gross,
Stefan Schwarz,
Andreas Hartung,
Malte Krack
Abstract:
We consider the common problem setting of an elastic sphere impacting on a flexible beam. In contrast to previous studies, we analyze the modal energy distribution induced by the impact, having in mind the particular application of impact vibration absorbers. Also, the beam is analyzed in the clamped-clamped configuration, in addition to the free-free configuration usually considered. We demonstra…
▽ More
We consider the common problem setting of an elastic sphere impacting on a flexible beam. In contrast to previous studies, we analyze the modal energy distribution induced by the impact, having in mind the particular application of impact vibration absorbers. Also, the beam is analyzed in the clamped-clamped configuration, in addition to the free-free configuration usually considered. We demonstrate that the designed test rig permits to obtain well-repeatable measurements. The measurements are confronted with predictions obtained using two different approaches, state-of-the-art Finite Element Analysis and a recently developed computational approach involving a reduced-order model. The innovative aspect of the latter approach is to achieve a massless contact boundary using component mode synthesis, which reduces the mathematical model order and numerical oscillations. We show that the novel computational approach reduces the numerical effort by 3-4 orders of magnitude compared to state-of-the-art Finite Element Analysis, without compromising the excellent agreement with the measurements.
△ Less
Submitted 2 July, 2022;
originally announced July 2022.
-
Prediction and validation of the strongly modulated forced response of two beams undergoing frictional impacts
Authors:
Carlo Monjaraz-Tec,
Lukas Kohlmann,
Stefan Schwarz,
Andreas Hartung,
Johann Gross,
Malte Krack
Abstract:
We consider two cantilevered beams undergoing frictional impacts at the free end. The beams are designed to be of similar geometry so that they have distinct but close natural frequencies. Under harmonic base excitation near the primary resonance with the higher-frequency fundamental bending mode, the system shows a strongly modulated non-periodic response. The purpose of this work is to analyze t…
▽ More
We consider two cantilevered beams undergoing frictional impacts at the free end. The beams are designed to be of similar geometry so that they have distinct but close natural frequencies. Under harmonic base excitation near the primary resonance with the higher-frequency fundamental bending mode, the system shows a strongly modulated non-periodic response. The purpose of this work is to analyze to what extent the non-periodic vibro-impact dynamics can be predicted. To this end, we use a recently developed modeling and simulation approach. The approach relies on component mode synthesis, the massless boundary concept and an appropriate time step** scheme. Unilateral contact and dry friction are modeled as set-valued laws and imposed locally within the spatially resolved contact area. A linear model updating is carried out based on the natural frequencies and dam** ratios identified in the regime without impacts. The nonlinear simulation of the steady-state response to forward and backward stepped sine excitation is compared against measurements. The results are in very good agreement, especially in the light of the uncertainty associated with the observed material loss in the contact region and the nonlinear behavior of the clam**.
△ Less
Submitted 2 July, 2022;
originally announced July 2022.
-
Optogenetic switching of migration of contractile cells
Authors:
Oliver M. Drozdowski,
Falko Ziebert,
Ulrich S. Schwarz
Abstract:
Cell crawling on flat substrates is based on intracellular flows of the actin cytoskeleton that are driven by both actin polymerization at the front and myosin contractility at the back. The new experimental tool of optogenetics makes it possible to spatially control contraction and thereby possibly also cell migration. Here we analyze this situation theoretically using a one-dimensional active ge…
▽ More
Cell crawling on flat substrates is based on intracellular flows of the actin cytoskeleton that are driven by both actin polymerization at the front and myosin contractility at the back. The new experimental tool of optogenetics makes it possible to spatially control contraction and thereby possibly also cell migration. Here we analyze this situation theoretically using a one-dimensional active gel model in which the excluded volume interactions of myosin and their aggregation into minifilaments is modeled by a supercritical van der Waals fluid. This physically simple and transparent, but nonlinear and thermodynamically rigorous model predicts bistability between sessile and motile solutions. We then show that one can switch between these two states at realistic parameter ranges via optogenetic activation or inhibition of contractility, in agreement with recent experiments. We also predict the required activation strengths and initiation times.
△ Less
Submitted 13 June, 2022;
originally announced June 2022.
-
First-passage times in complex energy landscapes: a case study with nonmuscle myosin II assembly
Authors:
Rick Bebon,
Ulrich S. Schwarz
Abstract:
Complex energy landscapes often arise in biological systems, e.g. for protein folding, biochemical reactions or intracellular transport processes. Their physical effects are often reflected in the first-passage times arising from these energy landscapes. However, their calculation is notoriously challenging and it is often difficult to identify the most relevant features of a given energy landscap…
▽ More
Complex energy landscapes often arise in biological systems, e.g. for protein folding, biochemical reactions or intracellular transport processes. Their physical effects are often reflected in the first-passage times arising from these energy landscapes. However, their calculation is notoriously challenging and it is often difficult to identify the most relevant features of a given energy landscape. Here we show how this can be achieved by coarse-graining the Fokker-Planck equation to a master equation and decomposing its first-passage times in an iterative process. We apply this method to the electrostatic interaction between two rods of nonmuscle myosin II (NM2), which is the main molecular motor for force generation in nonmuscle cells. Energy landscapes are computed directly from the amino acid sequences of the three different isoforms. Our approach allows us to identify the most relevant energy barriers for their self-assembly into nonmuscle myosin II minifilaments and how they change under force. In particular, we find that antiparallel configurations are more stable than parallel ones, but also show more changes under mechanical loading. Our work demonstrates the rich dynamics that can be expected for NM2-assemblies under mechanical load and in general shows how one can identify the most relevant energy barriers in complex energy landscapes.
△ Less
Submitted 3 June, 2022; v1 submitted 7 April, 2022;
originally announced April 2022.
-
Attention Aided CSI Wireless Localization
Authors:
Artan Salihu,
Stefan Schwarz,
Markus Rupp
Abstract:
Deep neural networks (DNNs) have become a popular approach for wireless localization based on channel state information (CSI). A common practice is to use the raw CSI in the input and allow the network to learn relevant channel representations for map** to location information. However, various works show that raw CSI can be very sensitive to system impairments and small changes in the environme…
▽ More
Deep neural networks (DNNs) have become a popular approach for wireless localization based on channel state information (CSI). A common practice is to use the raw CSI in the input and allow the network to learn relevant channel representations for map** to location information. However, various works show that raw CSI can be very sensitive to system impairments and small changes in the environment. On the contrary, hand-designing features may hinder the limits of channel representation learning of the DNN. In this work, we propose attention-based CSI for robust feature learning. We evaluate the performance of attended features in centralized and distributed massive MIMO systems for ray-tracing channels in two non-stationary railway track environments. By comparison to a base DNN, our approach provides exceptional performance.
△ Less
Submitted 20 March, 2022;
originally announced March 2022.
-
Impact of Channel Correlation on Subspace-Based Activity Detection in Grant-Free NOMA
Authors:
Bashar Tahir,
Stefan Schwarz,
Markus Rupp
Abstract:
In this paper, we consider the problem of activity detection in grant-free code-domain non-orthogonal multiple access (NOMA). We focus on performing activity detection via subspace methods under a setup where the data and pilot spreading signatures are of different lengths, and consider a realistic frame-structure similar to existing mobile networks. We investigate the impact of channel correlatio…
▽ More
In this paper, we consider the problem of activity detection in grant-free code-domain non-orthogonal multiple access (NOMA). We focus on performing activity detection via subspace methods under a setup where the data and pilot spreading signatures are of different lengths, and consider a realistic frame-structure similar to existing mobile networks. We investigate the impact of channel correlation on the activity detection performance; first, we consider the case where the channel exhibits high correlation in time and frequency and show how it can heavily deteriorate the performance. To tackle that, we propose to apply user-specific masking sequences overlaid on top of the pilot signatures. Second, we consider the other extreme with the channel being highly selective, and show that it can also negatively impact the performance. We investigate possible pilots' reallocation strategies that can help reduce its impact.
△ Less
Submitted 27 April, 2022; v1 submitted 22 February, 2022;
originally announced February 2022.
-
Efficient Random Walks on Riemannian Manifolds
Authors:
Simon Schwarz,
Michael Herrmann,
Anja Sturm,
Max Wardetzky
Abstract:
According to a version of Donsker's theorem, geodesic random walks on Riemannian manifolds converge to the respective Brownian motion. From a computational perspective, however, evaluating geodesics can be quite costly. We therefore introduce approximate geodesic random walks based on the concept of retractions. We show that these approximate walks converge in distribution to the correct Brownian…
▽ More
According to a version of Donsker's theorem, geodesic random walks on Riemannian manifolds converge to the respective Brownian motion. From a computational perspective, however, evaluating geodesics can be quite costly. We therefore introduce approximate geodesic random walks based on the concept of retractions. We show that these approximate walks converge in distribution to the correct Brownian motion as long as the geodesic equation is approximated up to second order. As a result we obtain an efficient algorithm for sampling Brownian motion on compact Riemannian manifolds.
△ Less
Submitted 3 December, 2023; v1 submitted 2 February, 2022;
originally announced February 2022.
-
Learning-based Remote Radio Head Selection and Localization in Distributed Antenna System
Authors:
Artan Salihu,
Stefan Schwarz,
Markus Rupp
Abstract:
In this work, we consider estimating user positions in a spatially distributed antenna system (DAS) from the uplink channel state information (CSI). However, with the increased number of remote radio heads (RRHs), collecting CSI at a central unit (CU) can significantly increase the fronthaul overhead and computational complexity of the CU. This problem can be mitigated by selecting a subset of RRH…
▽ More
In this work, we consider estimating user positions in a spatially distributed antenna system (DAS) from the uplink channel state information (CSI). However, with the increased number of remote radio heads (RRHs), collecting CSI at a central unit (CU) can significantly increase the fronthaul overhead and computational complexity of the CU. This problem can be mitigated by selecting a subset of RRHs. Thus, we present a deep learning-based approach to select a subset of RRHs for wireless localization. We employ an RRH selection layer that is jointly trained with the rest of the network and learn the model parameters as well as the set of selected RRHs. We show that the selection strategy comes at a relatively small cost of localization performance. Nonetheless, by comparison to a trivial approach based on the maximization of the channel gain, we show that the proposed method leads to significant performance gains in a propagation environment dominated by non-line-of-sight.
△ Less
Submitted 7 November, 2021;
originally announced November 2021.
-
Improved Nuclear Physics Near $A=61$ Refines Urca Neutrino Luminosities in Accreted Neutron Star Crusts
Authors:
Zach Meisel,
Alec Hamaker,
G. Bollen,
B. A. Brown,
M. Eibach,
K. Gulyuz,
C. Izzo,
C. Langer,
F. Montes,
W. -J Ong,
D. Puentes,
M. Redshaw,
R. Ringle,
R. Sandler,
H. Schatz,
S. Schwarz,
C. S. Sumithrarachchi,
A. A. Valverde,
I. T. Yandow
Abstract:
We performed a Penning trap mass measurement of $^{61}{\rm Zn}$ at the National Superconducting Cyclotron Laboratory and NuShellX calculations of the $^{61}{\rm Zn}$ and $^{62}{\rm Ga}$ structure using the GXPF1A Hamiltonian to obtain improved estimates of the $^{61}{\rm Zn}(p,γ)^{62}{\rm Ga}$ and $^{60}{\rm Cu}(p,γ)^{61}{\rm Zn}$ reaction rates. Surveying astrophysical conditions for type-I X-ray…
▽ More
We performed a Penning trap mass measurement of $^{61}{\rm Zn}$ at the National Superconducting Cyclotron Laboratory and NuShellX calculations of the $^{61}{\rm Zn}$ and $^{62}{\rm Ga}$ structure using the GXPF1A Hamiltonian to obtain improved estimates of the $^{61}{\rm Zn}(p,γ)^{62}{\rm Ga}$ and $^{60}{\rm Cu}(p,γ)^{61}{\rm Zn}$ reaction rates. Surveying astrophysical conditions for type-I X-ray bursts with the code MESA, implementing our improved reaction rates, and taking into account updated nuclear masses for $^{61}{\rm V}$ and $^{61}{\rm Cr}$ from the recent literature, we refine the neutrino luminosity from the important mass number $A=61$ urca cooling source in accreted neutron star crusts. This improves our understanding of the thermal barrier between deep heating in the crust and the shallow depths where extra heat is needed to explain X-ray superbursts, as well as the expected signature of crust urca neutrino emission in light curves of cooling transients.
△ Less
Submitted 27 October, 2021;
originally announced October 2021.
-
Learning Robotic Manipulation Skills Using an Adaptive Force-Impedance Action Space
Authors:
Maximilian Ulmer,
Elie Aljalbout,
Sascha Schwarz,
Sami Haddadin
Abstract:
Intelligent agents must be able to think fast and slow to perform elaborate manipulation tasks. Reinforcement Learning (RL) has led to many promising results on a range of challenging decision-making tasks. However, in real-world robotics, these methods still struggle, as they require large amounts of expensive interactions and have slow feedback loops. On the other hand, fast human-like adaptive…
▽ More
Intelligent agents must be able to think fast and slow to perform elaborate manipulation tasks. Reinforcement Learning (RL) has led to many promising results on a range of challenging decision-making tasks. However, in real-world robotics, these methods still struggle, as they require large amounts of expensive interactions and have slow feedback loops. On the other hand, fast human-like adaptive control methods can optimize complex robotic interactions, yet fail to integrate multimodal feedback needed for unstructured tasks. In this work, we propose to factor the learning problem in a hierarchical learning and adaption architecture to get the best of both worlds. The framework consists of two components, a slow reinforcement learning policy optimizing the task strategy given multimodal observations, and a fast, real-time adaptive control policy continuously optimizing the motion, stability, and effort of the manipulator. We combine these components through a bio-inspired action space that we call AFORCE. We demonstrate the new action space on a contact-rich manipulation task on real hardware and evaluate its performance on three simulated manipulation tasks. Our experiments show that AFORCE drastically improves sample efficiency while reducing energy consumption and improving safety.
△ Less
Submitted 20 October, 2021; v1 submitted 19 October, 2021;
originally announced October 2021.
-
Remote state preparation of single photon orbital angular momentum lattices
Authors:
Andrew R. Cameron,
Sandra W. L. Cheng,
Sacha Schwarz,
Connor Kapahi,
Dusan Sarenac,
Michael Grabowecky,
David G. Cory,
Thomas Jennewein,
Dmitry A. Pushin,
Kevin J. Resch
Abstract:
Optical beams with periodic lattice structures have broadened the study of structured waves. In the present work, we generate spin-orbit entangled photon states with a lattice structure and use them in a remote state preparation protocol. We sequentially measure spatially-dependent correlation rates with an electron-multiplying intensified CCD camera and verify the successful remote preparation of…
▽ More
Optical beams with periodic lattice structures have broadened the study of structured waves. In the present work, we generate spin-orbit entangled photon states with a lattice structure and use them in a remote state preparation protocol. We sequentially measure spatially-dependent correlation rates with an electron-multiplying intensified CCD camera and verify the successful remote preparation of spin-orbit states by performing pixel-wise quantum state tomography. Control of these novel structured waves in the quantum regime provides a method for quantum sensing and manipulation of periodic structures.
△ Less
Submitted 15 June, 2021;
originally announced June 2021.
-
Towards Scalable Uncertainty Aware DNN-based Wireless Localisation
Authors:
Artan Salihu,
Stefan Schwarz,
Markus Rupp
Abstract:
Existing deep neural network (DNN) based wireless localization approaches typically do not capture uncertainty inherent in their estimates. In this work, we propose and evaluate variational and scalable DNN approaches to measure the uncertainty as a result of changing propagation conditions and the finite number of training samples. Furthermore, we show that data uncertainty is sufficient to captu…
▽ More
Existing deep neural network (DNN) based wireless localization approaches typically do not capture uncertainty inherent in their estimates. In this work, we propose and evaluate variational and scalable DNN approaches to measure the uncertainty as a result of changing propagation conditions and the finite number of training samples. Furthermore, we show that data uncertainty is sufficient to capture the uncertainty due to non-line-of-sight (NLOS) and, model uncertainty improves the overall reliability. To assess the robustness due to channel conditions and out-of-set regions, we evaluate the methods on challenging massive multiple-input multiple-output (MIMO) scenarios.
△ Less
Submitted 8 June, 2021;
originally announced June 2021.
-
Refining the bounding volumes for lossless compression of voxelized point clouds geometry
Authors:
Emre Can Kaya,
Sebastian Schwarz,
Ioan Tabus
Abstract:
This paper describes a novel lossless compression method for point cloud geometry, building on a recent lossy compression method that aimed at reconstructing only the bounding volume of a point cloud. The proposed scheme starts by partially reconstructing the geometry from the two depthmaps associated to a single projection direction. The partial reconstruction obtained from the depthmaps is compl…
▽ More
This paper describes a novel lossless compression method for point cloud geometry, building on a recent lossy compression method that aimed at reconstructing only the bounding volume of a point cloud. The proposed scheme starts by partially reconstructing the geometry from the two depthmaps associated to a single projection direction. The partial reconstruction obtained from the depthmaps is completed to a full reconstruction of the point cloud by swee** section by section along one direction and encoding the points which were not contained in the two depthmaps. The main ingredient is a list-based encoding of the inner points (situated inside the feasible regions) by a novel arithmetic three dimensional context coding procedure that efficiently utilizes rotational invariances present in the input data. State-of-the-art bits-per-voxel results are obtained on benchmark datasets.
△ Less
Submitted 1 June, 2021;
originally announced June 2021.
-
Optogenetic control of intracellular flows and cell migration: a comprehensive mathematical analysis with a minimal active gel model
Authors:
Oliver M. Drozdowski,
Falko Ziebert,
Ulrich S. Schwarz
Abstract:
The actin cytoskeleton of cells is in continuous motion due to both polymerization of new filaments and their contraction by myosin II molecular motors. Through adhesion to the substrate, such intracellular flow can be converted into cell migration. Recently, optogenetics has emerged as a new powerful experimental method to control both actin polymerization and myosin II contraction. While optogen…
▽ More
The actin cytoskeleton of cells is in continuous motion due to both polymerization of new filaments and their contraction by myosin II molecular motors. Through adhesion to the substrate, such intracellular flow can be converted into cell migration. Recently, optogenetics has emerged as a new powerful experimental method to control both actin polymerization and myosin II contraction. While optogenetic control of polymerization can initiate cell migration by generating protrusion, it is less clear if and how optogenetic control of contraction can also affect cell migration. Here we analyze the latter situation using a minimal variant of active gel theory into which we include optogenetic activation as a spatiotemporally constrained perturbation. The model can describe the symmetrical flow of the actomyosin system observed in optogenetic experiments, but not the long-lasting polarization required for cell migration. Motile solutions become possible if cytoskeletal polymerization is included through the boundary conditions. Optogenetic activation of contraction can then initiate locomotion in a symmetrically spreading cell and strengthen motility in an asymmetrically polymerizing one. If designed appropriately, it can also arrest motility even for protrusive boundaries.
△ Less
Submitted 6 July, 2021; v1 submitted 29 April, 2021;
originally announced April 2021.
-
RIS-Assisted Code-Domain MIMO-NOMA
Authors:
Bashar Tahir,
Stefan Schwarz,
Markus Rupp
Abstract:
We consider the combination of uplink code-domain non-orthogonal multiple access (NOMA) with massive multiple-input multiple-output (MIMO) and reconfigurable intelligent surfaces (RISs). We assume a setup in which the base station (BS) is capable of forming beams towards the RISs under line-of-sight conditions, and where each RIS is covering a cluster of users. In order to support multi-user trans…
▽ More
We consider the combination of uplink code-domain non-orthogonal multiple access (NOMA) with massive multiple-input multiple-output (MIMO) and reconfigurable intelligent surfaces (RISs). We assume a setup in which the base station (BS) is capable of forming beams towards the RISs under line-of-sight conditions, and where each RIS is covering a cluster of users. In order to support multi-user transmissions within a cluster, code-domain NOMA via spreading is utilized. We investigate the optimization of the RIS phase-shifts such that a large number of users is supported. As it turns out, it is a coupled optimization problem that depends on the detection order under interference cancellation and the applied filtering at the BS. We propose to decouple those variables by using sum-rate optimized phase-shifts as the initial solution, allowing us to obtain a decoupled estimate of those variables. Then, in order to determine the final phase-shifts, the problem is relaxed into a semidefinite program that can be solved efficiently via convex optimization algorithms. Simulation results show the effectiveness of our approach in improving the detectability of the users.
△ Less
Submitted 26 May, 2021; v1 submitted 11 March, 2021;
originally announced March 2021.
-
Low-Complexity Zero-Forcing Precoding for XL-MIMO Transmissions
Authors:
Lucas N. Ribeiro,
Stefan Schwarz,
Martin Haardt
Abstract:
Deploying antenna arrays with an asymptotically large aperture will be central to achieving the theoretical gains of massive MIMO in beyond-5G systems. Such extra-large MIMO (XL-MIMO) systems experience propagation conditions which are not typically observed in conventional massive MIMO systems, such as spatial non-stationarities and near-field propagation. Moreover, standard precoding schemes, su…
▽ More
Deploying antenna arrays with an asymptotically large aperture will be central to achieving the theoretical gains of massive MIMO in beyond-5G systems. Such extra-large MIMO (XL-MIMO) systems experience propagation conditions which are not typically observed in conventional massive MIMO systems, such as spatial non-stationarities and near-field propagation. Moreover, standard precoding schemes, such as zero-forcing (ZF), may not apply to XL-MIMO transmissions due to the prohibitive complexity associated with such a large-scale scenario. We propose two novel precoding schemes that aim at reducing the complexity without losing much performance. The proposed schemes leverage a plane-wave approximation and user grou** to obtain a low-complexity approximation of the ZF precoder. Our simulation results show that the proposed schemes offer a possibility for a performance and complexity trade-off compared to the benchmark schemes.
△ Less
Submitted 1 March, 2021;
originally announced March 2021.
-
Outage Analysis of Uplink IRS-Assisted NOMA under Elements Splitting
Authors:
Bashar Tahir,
Stefan Schwarz,
Markus Rupp
Abstract:
In this paper, we investigate the outage performance of an intelligent reflecting surface (IRS)-assisted non-orthogonal multiple access (NOMA) uplink, in which a group of the surface reflecting elements are configured to boost the signal of one of the user equipments (UEs), while the remaining elements are used to boost the other UE. By approximating the received powers as Gamma random variables,…
▽ More
In this paper, we investigate the outage performance of an intelligent reflecting surface (IRS)-assisted non-orthogonal multiple access (NOMA) uplink, in which a group of the surface reflecting elements are configured to boost the signal of one of the user equipments (UEs), while the remaining elements are used to boost the other UE. By approximating the received powers as Gamma random variables, tractable expressions for the outage probability under NOMA interference cancellation are obtained. We evaluate the outage over different splits of the elements and varying pathloss differences between the two UEs. The analysis shows that for small pathloss differences, the split should be chosen such that most of the IRS elements are configured to boost the stronger UE, while for large pathloss differences, it is more beneficial to boost the weaker UE. Finally, we investigate a robust selection of the elements' split under the criterion of minimizing the maximum outage between the two UEs.
△ Less
Submitted 2 March, 2021; v1 submitted 1 February, 2021;
originally announced February 2021.
-
Particle-in-Cell Techniques for the Study of Space Charge Effects in the Advanced Cryogenic Gas Stopper
Authors:
R. Ringle,
G. Bollen,
K. Lund,
C. Nicoloff,
S. Schwarz,
C. S. Sumithrarachchi,
A. C. C. Villari
Abstract:
Linear gas stoppers are widely used to convert high-energy, rare-isotope beams and reaction products into low-energy beams with small transverse emittance and energy spread. Stop** of the high-energy ions is achieved through interaction with a buffer gas, typically helium, generating large quantities of He$^+$/e$^-$ pairs. The Advanced Cryogenic Gas Stopper (ACGS) was designed for fast, efficien…
▽ More
Linear gas stoppers are widely used to convert high-energy, rare-isotope beams and reaction products into low-energy beams with small transverse emittance and energy spread. Stop** of the high-energy ions is achieved through interaction with a buffer gas, typically helium, generating large quantities of He$^+$/e$^-$ pairs. The Advanced Cryogenic Gas Stopper (ACGS) was designed for fast, efficient stop** and extraction of high-intensity, rare-isotope beams. As part of the design process, a comprehensive particle-in-cell code was developed to optimize the transport and extraction of rare isotopes from the ACGS in the presence of space charge, including He$^+$/e$^-$ dynamics, buffer gas interactions including gas flow, RF carpets, and ion extraction through a nozzle or orifice. Details of the simulations are presented together with comparison to experiment when available.
△ Less
Submitted 9 December, 2020;
originally announced December 2020.
-
Rapid online solid-state battery diagnostics with optically pumped magnetometers
Authors:
Yinan Hu,
Geoffrey Z. Iwata,
Lykourgos Bougas,
John W. Blanchard,
Arne Wickenbrock,
Gerhard Jakob,
Stephan Schwarz,
Clemens Schwarzinger,
Alexej Jerschow,
Dmitry Budker
Abstract:
Solid state battery technology is motivated by the desire to deliver flexible power storage in a safe and efficient manner. The increasingly widespread use of batteries from mass-production facilities highlights the need for a rapid and sensitive diagnostic for identifying battery defects. We demonstrate the use of atomic magnetometry to measure the magnetic fields around miniature solid-state bat…
▽ More
Solid state battery technology is motivated by the desire to deliver flexible power storage in a safe and efficient manner. The increasingly widespread use of batteries from mass-production facilities highlights the need for a rapid and sensitive diagnostic for identifying battery defects. We demonstrate the use of atomic magnetometry to measure the magnetic fields around miniature solid-state battery cells. These fields encode information about battery manufacturing defects, state of charge, impurities, or can provide important insights into ageing processes. Compared with SQUID-based magnetometry, the availability of atomic magnetometers, however, highlights the possibility for a low-cost, portable, and flexible implementation of battery quality-control and characterization technology.
△ Less
Submitted 5 October, 2020;
originally announced October 2020.
-
Recursive CSI Quantization of Time-Correlated MIMO Channels by Deep Learning Classification
Authors:
Stefan Schwarz
Abstract:
In frequency division duplex (FDD) multiple-input multiple-output (MIMO) wireless communications, limited channel state information (CSI) feedback is a central tool to support advanced single- and multi-user MIMO beamforming/precoding. To achieve a given CSI quality, the CSI quantization codebook size has to grow exponentially with the number of antennas, leading to quantization complexity, as wel…
▽ More
In frequency division duplex (FDD) multiple-input multiple-output (MIMO) wireless communications, limited channel state information (CSI) feedback is a central tool to support advanced single- and multi-user MIMO beamforming/precoding. To achieve a given CSI quality, the CSI quantization codebook size has to grow exponentially with the number of antennas, leading to quantization complexity, as well as, feedback overhead issues for larger MIMO systems. We have recently proposed a multi-stage recursive Grassmannian quantizer that enables a significant complexity reduction of CSI quantization. In this paper, we show that this recursive quantizer can effectively be combined with deep learning classification to further reduce the complexity, and that it can exploit temporal channel correlations to reduce the CSI feedback overhead.
△ Less
Submitted 28 September, 2020;
originally announced September 2020.
-
Low-Complexity Massive MIMO Tensor Precoding
Authors:
Lucas N. Ribeiro,
Stefan Schwarz,
André L. F. de Almeida,
Martin Haardt
Abstract:
We present a novel and low-complexity massive multiple-input multiple-output (MIMO) precoding strategy based on novel findings concerning the subspace separability of Rician fading channels. Considering a uniform rectangular array at the base station, we show that the subspaces spanned by the channel vectors can be factorized as a tensor product between two lower dimensional subspaces. Based on th…
▽ More
We present a novel and low-complexity massive multiple-input multiple-output (MIMO) precoding strategy based on novel findings concerning the subspace separability of Rician fading channels. Considering a uniform rectangular array at the base station, we show that the subspaces spanned by the channel vectors can be factorized as a tensor product between two lower dimensional subspaces. Based on this result, we formulate tensor maximum ratio transmit and zero-forcing precoders. We show that the proposed tensor precoders exhibit lower computational complexity and require less instantaneous channel state information than their linear counterparts. Finally, we present computer simulations that demonstrate the applicability of the proposed tensor precoders in practical communication scenarios.
△ Less
Submitted 21 September, 2020;
originally announced September 2020.
-
Analysis of Uplink IRS-Assisted NOMA under Nakagami-m Fading via Moments Matching
Authors:
Bashar Tahir,
Stefan Schwarz,
Markus Rupp
Abstract:
This letter investigates the uplink outage performance of intelligent reflecting surface (IRS)-assisted non-orthogonal multiple access (NOMA). We consider the general case where all users have both direct and reflection links, and all links undergo Nakagami-m fading. We approximate the received powers of the NOMA users as Gamma random variables via moments matching. This allows for tractable expre…
▽ More
This letter investigates the uplink outage performance of intelligent reflecting surface (IRS)-assisted non-orthogonal multiple access (NOMA). We consider the general case where all users have both direct and reflection links, and all links undergo Nakagami-m fading. We approximate the received powers of the NOMA users as Gamma random variables via moments matching. This allows for tractable expressions of the outage under interference cancellation (IC), while being flexible in modeling various propagation environments. Our analysis shows that under certain conditions, the presence of an IRS might degrade the performance of users that have dominant line-of-sight (LOS) to the base station (BS), while users dominated by non-line-of-sight (NLOS) will always benefit from it.
△ Less
Submitted 28 October, 2020; v1 submitted 7 September, 2020;
originally announced September 2020.
-
Check Your (Students') Proofs-With Holes
Authors:
Dennis Renz,
Sibylle Schwarz,
Johannes Waldmann
Abstract:
Cyp (Check Your Proofs) (Durner and Noschinski 2013; Traytel 2019) verifies proofs about Haskell-like programs. We extended Cyp with a pattern matcher for programs and proof terms, and a type checker.
This allows to use Cyp for auto-grading exercises where the goal is to complete programs and proofs that are partially given by the instructor, as terms with holes. Since this allows holes in progr…
▽ More
Cyp (Check Your Proofs) (Durner and Noschinski 2013; Traytel 2019) verifies proofs about Haskell-like programs. We extended Cyp with a pattern matcher for programs and proof terms, and a type checker.
This allows to use Cyp for auto-grading exercises where the goal is to complete programs and proofs that are partially given by the instructor, as terms with holes. Since this allows holes in programs, type-checking becomes essential. Before, Cyp assumed that the program was written by a type-correct instructor, and therefore omitted type-checking of proofs. Cyp gracefully handles incomplete student submissions. It accepts holes temporarily, and checks complete subtrees fully.
We present basic design decisions, make some remarks on implementation, and include example exercises from a recent course that used Cyp as part of the Leipzig Autotool auto-grading system.
△ Less
Submitted 2 September, 2020;
originally announced September 2020.
-
Rheology of mixed motor ensembles
Authors:
Justin Grewe,
Ulrich S. Schwarz
Abstract:
The rheology of biological cells is not only determined by their cytoskeletal networks, but also by the molecular motors that crosslink and contract them. Recently it has been found that the assemblies of myosin II molecular motors in non-muscle cells are mixtures of fast and slow motor variants. Using computer simulations and an analytical mean field theory of a crossbridge model for myosin II mo…
▽ More
The rheology of biological cells is not only determined by their cytoskeletal networks, but also by the molecular motors that crosslink and contract them. Recently it has been found that the assemblies of myosin II molecular motors in non-muscle cells are mixtures of fast and slow motor variants. Using computer simulations and an analytical mean field theory of a crossbridge model for myosin II motors, here we show that such motor ensembles effectively behave as active Maxwell elements. We calculate storage and loss moduli as a function of the model parameters and show that the rheological properties cross over from viscous to elastic as one increases the ratio of slow to fast motors. This suggests that cells tune their mechanical properties by regulating the composition of their myosin assemblies.
△ Less
Submitted 10 July, 2020;
originally announced July 2020.
-
First Penning trap mass measurement of $^{36}$Ca
Authors:
J. Surbrook,
G. Bollen,
M. Brodeur,
A. Hamaker,
D. Pérez-Loureiro,
D. Puentes,
C. Nicoloff,
M. Redshaw,
R. Ringle,
S. Schwarz,
C. S. Sumithrarachchi,
L. J. Sun,
A. A. Valverde,
A. C. C. Villari,
C. Wrede,
I. T. Yandow
Abstract:
Isobaric quintets provide the best test of the isobaric multiplet mass equation (IMME) and can uniquely identify higher order corrections suggestive of isospin symmetry breaking effects in the nuclear Hamiltonian. The Generalized IMME (GIMME) is a novel microscopic interaction theory that predicts an extension to the quadratic form of the IMME. Only the $A=20, 32$ $T=2$ quintets have the exotic…
▽ More
Isobaric quintets provide the best test of the isobaric multiplet mass equation (IMME) and can uniquely identify higher order corrections suggestive of isospin symmetry breaking effects in the nuclear Hamiltonian. The Generalized IMME (GIMME) is a novel microscopic interaction theory that predicts an extension to the quadratic form of the IMME. Only the $A=20, 32$ $T=2$ quintets have the exotic $T_z = -2$ member ground state mass determined to high-precision by Penning trap mass spectrometry. In this work, we establish $A=36$ as the third high-precision $T=2$ isobaric quintet with the $T_z = -2$ member ground state mass measured by Penning trap mass spectrometry and provide the first test of the predictive power of the GIMME. A radioactive beam of neutron-deficient $^{36}$Ca was produced by projectile fragmentation at the National Superconducting Cyclotron Laboratory. The beam was thermalized and the mass of $^{36}$Ca$^+$ and $^{36}$Ca$^{2+}$ measured by the Time of Flight - Ion Cyclotron Resonance method in the LEBIT 9.4 T Penning trap. We measure the mass excess of $^{36}$Ca to be ME$ = -6483.6(56)$ keV, an improvement in precision by a factor of 6 over the literature value. The new datum is considered together with evaluated nuclear data on the $A=36$, $T=2$ quintet. We find agreement with the quadratic form of the IMME given by isospin symmetry, but only coarse qualitative agreement with predictions of the GIMME. A total of three isobaric quintets have their most exotic members measured by Penning trap mass spectrometry. The GIMME predictions in the $T = 2$ quintet appear to break down for $A = 32$ and greater.
△ Less
Submitted 6 May, 2020;
originally announced May 2020.
-
High precision mass measurements of the isomeric and ground states of $^{44}$V: improving constraints on the IMME parameters of the A=44, $\text{0}^{\text{+}}$ quintet
Authors:
D. Puentes,
G. Bollen,
M. Brodeur,
M. Eibach,
K. Gulyuz,
A. Hamaker,
C. Izzo,
S. M. Lenzi,
M. MacCormick,
M. Redshaw,
R. Ringle,
R. Sandler,
S. Schwarz,
P. Schury,
N. A. Smirnova,
J. Surbrook,
A. A. Valverde,
A. C. C. Villari,
I. T. Yandow
Abstract:
The Isobaric Multiplet Mass Equation (IMME) has been successful at predicting the masses of isobaric analogue states in the same multiplet, while its coefficients are known to follow trends as functions of mass number. The Atomic Mass Evaluation 2016 [Chin. Phys. C 41, 030003 (2017)] $^{44}$V mass value results in an negative $c$ coefficient for the IMME quadratic term. The $b$ and $c$ coefficient…
▽ More
The Isobaric Multiplet Mass Equation (IMME) has been successful at predicting the masses of isobaric analogue states in the same multiplet, while its coefficients are known to follow trends as functions of mass number. The Atomic Mass Evaluation 2016 [Chin. Phys. C 41, 030003 (2017)] $^{44}$V mass value results in an negative $c$ coefficient for the IMME quadratic term. The $b$ and $c$ coefficients can provide constraints for construction of the isospin-nonconserving (INC) Hamiltonians for the $pf$ shell. The excitation energy of the $0^+, T=2$ level in $^{44}$V is currently unknown and can be used to constrain the $^{44}$Cr mass. The aim of the experiment was to perform high-precision mass measurements to resolve the difference between $^{44}$V isomeric and ground states, to test the IMME, and to provide ingredients for identifying the $0^+$, $T=2$ state in $^{44}$V. High-precision Penning trap mass spectrometry was performed at LEBIT, to measure the cyclotron frequency ratios of [$^{44g,m}$VO]$^+$ versus [$^{32}$SCO]$^+$, a reference mass, to extract both the isomeric and ground state masses of $^{44}$V. The mass excess of the ground and isomeric states in $^{44}$V were measured to be $-23\ 804.9(80)$ keV/$\text{c}^2$ and $-23\ 537.0(55)$ keV/$\text{c}^2$. This yielded a new proton separation energy of $S_p$ = 1\ 773(10) keV. The new mass values of $^{44}$V have been used to deduce the IMME $b$ and $c$ coefficients of the lowest $2^+$ and $6^+$ triplets in $A=44$. The $2^+$ $c$ coefficient is verified with the IMME trend and agrees with the shell-model predictions using charge-dependent Hamiltonians. The mirror energy differences were determined between $^{44}$V and $^{44}$Sc, in line with isospin-symmetry. The new value of the proton separation energy determined will be important for the determination of the $0^+$, $T=2$ state in $^{44}$V and for prediction of the mass of $^{44}$Cr.
△ Less
Submitted 4 May, 2020; v1 submitted 12 March, 2020;
originally announced March 2020.
-
Electrically pumped WSe$_2$-based light-emitting van der Waals heterostructures embedded in monolithic dielectric microcavities
Authors:
O. Del Pozo-Zamudio,
A. Genco,
S. Schwarz,
F. Withers,
P. M. Walker,
T. Godde,
R. C. Schofield,
A. P. Rooney,
E. Prestat,
K. Watanabe,
T. Taniguchi,
C. Clark,
S. J. Haigh,
D. N. Krizhanovskii,
K. S. Novoselov,
A. I. Tartakovskii
Abstract:
Vertical stacking of atomically thin layered materials opens new possibilities for the fabrication of heterostructures with favorable optoelectronic properties. The combination of graphene, hexagonal boron nitride and semiconducting transition metal dichalcogenides allows fabrication of electroluminescence (EL) devices, compatible with a wide range of substrates. Here, we demonstrate a full integr…
▽ More
Vertical stacking of atomically thin layered materials opens new possibilities for the fabrication of heterostructures with favorable optoelectronic properties. The combination of graphene, hexagonal boron nitride and semiconducting transition metal dichalcogenides allows fabrication of electroluminescence (EL) devices, compatible with a wide range of substrates. Here, we demonstrate a full integration of an electroluminescent van der Waals heterostructure in a monolithic optical microcavity made of two high reflectivity dielectric distributed Bragg reflectors (DBRs). Owing to the presence of graphene and hexagonal boron nitride protecting the WSe$_2$ during the top mirror deposition, we fully preserve the optoelectronic behaviour of the device. Two bright cavity modes appear in the EL spectrum featuring Q-factors of 250 and 580 respectively: the first is attributed directly to the monolayer area, while the second is ascribed to the portion of emission guided outside the WSe$_2$ island. By embedding the EL device inside the microcavity structure, a significant modification of the directionality of the emitted light is achieved, with the peak intensity increasing by nearly two orders of magnitude at the angle of the maximum emission compared with the same EL device without the top DBR. Furthermore, the coupling of the WSe$_2$ EL to the cavity mode with a dispersion allows a tuning of the peak emission wavelength exceeding 35 nm (80 meV) by varying the angle at which the EL is observed from the microcavity. This work provides a route for the development of compact vertical-cavity surface-emitting devices based on van der Waals heterostructures.
△ Less
Submitted 4 June, 2020; v1 submitted 15 November, 2019;
originally announced November 2019.