-
The Potential of Wearable Sensors for Assessing Patient Acuity in Intensive Care Unit (ICU)
Authors:
Jessica Sena,
Mohammad Tahsin Mostafiz,
Jiaqing Zhang,
Andrea Davidson,
Sabyasachi Bandyopadhyay,
Ren Yuanfang,
Tezcan Ozrazgat-Baslanti,
Benjamin Shickel,
Tyler Loftus,
William Robson Schwartz,
Azra Bihorac,
Parisa Rashidi
Abstract:
Acuity assessments are vital in critical care settings to provide timely interventions and fair resource allocation. Traditional acuity scores rely on manual assessments and documentation of physiological states, which can be time-consuming, intermittent, and difficult to use for healthcare providers. Furthermore, such scores do not incorporate granular information such as patients' mobility level…
▽ More
Acuity assessments are vital in critical care settings to provide timely interventions and fair resource allocation. Traditional acuity scores rely on manual assessments and documentation of physiological states, which can be time-consuming, intermittent, and difficult to use for healthcare providers. Furthermore, such scores do not incorporate granular information such as patients' mobility level, which can indicate recovery or deterioration in the ICU. We hypothesized that existing acuity scores could be potentially improved by employing Artificial Intelligence (AI) techniques in conjunction with Electronic Health Records (EHR) and wearable sensor data. In this study, we evaluated the impact of integrating mobility data collected from wrist-worn accelerometers with clinical data obtained from EHR for develo** an AI-driven acuity assessment score. Accelerometry data were collected from 86 patients wearing accelerometers on their wrists in an academic hospital setting. The data was analyzed using five deep neural network models: VGG, ResNet, MobileNet, SqueezeNet, and a custom Transformer network. These models outperformed a rule-based clinical score (SOFA= Sequential Organ Failure Assessment) used as a baseline, particularly regarding the precision, sensitivity, and F1 score. The results showed that while a model relying solely on accelerometer data achieved limited performance (AUC 0.50, Precision 0.61, and F1-score 0.68), including demographic information with the accelerometer data led to a notable enhancement in performance (AUC 0.69, Precision 0.75, and F1-score 0.67). This work shows that the combination of mobility and patient information can successfully differentiate between stable and unstable states in critically ill patients.
△ Less
Submitted 3 November, 2023;
originally announced November 2023.
-
Open-Set Face Recognition with Maximal Entropy and Objectosphere Loss
Authors:
Rafael Henrique Vareto,
Yu Linghu,
Terrance E. Boult,
William Robson Schwartz,
Manuel Günther
Abstract:
Open-set face recognition characterizes a scenario where unknown individuals, unseen during the training and enrollment stages, appear on operation time. This work concentrates on watchlists, an open-set task that is expected to operate at a low False Positive Identification Rate and generally includes only a few enrollment samples per identity. We introduce a compact adapter network that benefits…
▽ More
Open-set face recognition characterizes a scenario where unknown individuals, unseen during the training and enrollment stages, appear on operation time. This work concentrates on watchlists, an open-set task that is expected to operate at a low False Positive Identification Rate and generally includes only a few enrollment samples per identity. We introduce a compact adapter network that benefits from additional negative face images when combined with distinct cost functions, such as Objectosphere Loss (OS) and the proposed Maximal Entropy Loss (MEL). MEL modifies the traditional Cross-Entropy loss in favor of increasing the entropy for negative samples and attaches a penalty to known target classes in pursuance of gallery specialization. The proposed approach adopts pre-trained deep neural networks (DNNs) for face recognition as feature extractors. Then, the adapter network takes deep feature representations and acts as a substitute for the output layer of the pre-trained DNN in exchange for an agile domain adaptation. Promising results have been achieved following open-set protocols for three different datasets: LFW, IJB-C, and UCCS as well as state-of-the-art performance when supplementary negative data is properly selected to fine-tune the adapter network.
△ Less
Submitted 1 November, 2023;
originally announced November 2023.
-
Open-set Face Recognition with Neural Ensemble, Maximal Entropy Loss and Feature Augmentation
Authors:
Rafael Henrique Vareto,
Manuel Günther,
William Robson Schwartz
Abstract:
Open-set face recognition refers to a scenario in which biometric systems have incomplete knowledge of all existing subjects. Therefore, they are expected to prevent face samples of unregistered subjects from being identified as previously enrolled identities. This watchlist context adds an arduous requirement that calls for the dismissal of irrelevant faces by focusing mainly on subjects of inter…
▽ More
Open-set face recognition refers to a scenario in which biometric systems have incomplete knowledge of all existing subjects. Therefore, they are expected to prevent face samples of unregistered subjects from being identified as previously enrolled identities. This watchlist context adds an arduous requirement that calls for the dismissal of irrelevant faces by focusing mainly on subjects of interest. As a response, this work introduces a novel method that associates an ensemble of compact neural networks with a margin-based cost function that explores additional samples. Supplementary negative samples can be obtained from external databases or synthetically built at the representation level in training time with a new mix-up feature augmentation approach. Deep neural networks pre-trained on large face datasets serve as the preliminary feature extraction module. We carry out experiments on well-known LFW and IJB-C datasets where results show that the approach is able to boost closed and open-set identification rates.
△ Less
Submitted 23 August, 2023;
originally announced August 2023.
-
Open-set Face Recognition using Ensembles trained on Clustered Data
Authors:
Rafael Henrique Vareto,
William Robson Schwartz
Abstract:
Open-set face recognition describes a scenario where unknown subjects, unseen during the training stage, appear on test time. Not only it requires methods that accurately identify individuals of interest, but also demands approaches that effectively deal with unfamiliar faces. This work details a scalable open-set face identification approach to galleries composed of hundreds and thousands of subj…
▽ More
Open-set face recognition describes a scenario where unknown subjects, unseen during the training stage, appear on test time. Not only it requires methods that accurately identify individuals of interest, but also demands approaches that effectively deal with unfamiliar faces. This work details a scalable open-set face identification approach to galleries composed of hundreds and thousands of subjects. It is composed of clustering and an ensemble of binary learning algorithms that estimates when query face samples belong to the face gallery and then retrieves their correct identity. The approach selects the most suitable gallery subjects and uses the ensemble to improve prediction performance. We carry out experiments on well-known LFW and YTF benchmarks. Results show that competitive performance can be achieved even when targeting scalability.
△ Less
Submitted 14 August, 2023;
originally announced August 2023.
-
Super-Resolution of License Plate Images Using Attention Modules and Sub-Pixel Convolution Layers
Authors:
Valfride Nascimento,
Rayson Laroca,
Jorge de A. Lambert,
William Robson Schwartz,
David Menotti
Abstract:
Recent years have seen significant developments in the field of License Plate Recognition (LPR) through the integration of deep learning techniques and the increasing availability of training data. Nevertheless, reconstructing license plates (LPs) from low-resolution (LR) surveillance footage remains challenging. To address this issue, we introduce a Single-Image Super-Resolution (SISR) approach t…
▽ More
Recent years have seen significant developments in the field of License Plate Recognition (LPR) through the integration of deep learning techniques and the increasing availability of training data. Nevertheless, reconstructing license plates (LPs) from low-resolution (LR) surveillance footage remains challenging. To address this issue, we introduce a Single-Image Super-Resolution (SISR) approach that integrates attention and transformer modules to enhance the detection of structural and textural features in LR images. Our approach incorporates sub-pixel convolution layers (also known as PixelShuffle) and a loss function that uses an Optical Character Recognition (OCR) model for feature extraction. We trained the proposed architecture on synthetic images created by applying heavy Gaussian noise to high-resolution LP images from two public datasets, followed by bicubic downsampling. As a result, the generated images have a Structural Similarity Index Measure (SSIM) of less than 0.10. Our results show that our approach for reconstructing these low-resolution synthesized images outperforms existing ones in both quantitative and qualitative measures. Our code is publicly available at https://github.com/valfride/lpr-rsr-ext/
△ Less
Submitted 26 May, 2023;
originally announced May 2023.
-
Combining Attention Module and Pixel Shuffle for License Plate Super-Resolution
Authors:
Valfride Nascimento,
Rayson Laroca,
Jorge de A. Lambert,
William Robson Schwartz,
David Menotti
Abstract:
The License Plate Recognition (LPR) field has made impressive advances in the last decade due to novel deep learning approaches combined with the increased availability of training data. However, it still has some open issues, especially when the data come from low-resolution (LR) and low-quality images/videos, as in surveillance systems. This work focuses on license plate (LP) reconstruction in L…
▽ More
The License Plate Recognition (LPR) field has made impressive advances in the last decade due to novel deep learning approaches combined with the increased availability of training data. However, it still has some open issues, especially when the data come from low-resolution (LR) and low-quality images/videos, as in surveillance systems. This work focuses on license plate (LP) reconstruction in LR and low-quality images. We present a Single-Image Super-Resolution (SISR) approach that extends the attention/transformer module concept by exploiting the capabilities of PixelShuffle layers and that has an improved loss function based on LPR predictions. For training the proposed architecture, we use synthetic images generated by applying heavy Gaussian noise in terms of Structural Similarity Index Measure (SSIM) to the original high-resolution (HR) images. In our experiments, the proposed method outperformed the baselines both quantitatively and qualitatively. The datasets we created for this work are publicly available to the research community at https://github.com/valfride/lpr-rsr/
△ Less
Submitted 30 October, 2022;
originally announced October 2022.
-
Face Attributes as Cues for Deep Face Recognition Understanding
Authors:
Matheus Alves Diniz,
William Robson Schwartz
Abstract:
Deeply learned representations are the state-of-the-art descriptors for face recognition methods. These representations encode latent features that are difficult to explain, compromising the confidence and interpretability of their predictions. Most attempts to explain deep features are visualization techniques that are often open to interpretation. Instead of relying only on visualizations, we us…
▽ More
Deeply learned representations are the state-of-the-art descriptors for face recognition methods. These representations encode latent features that are difficult to explain, compromising the confidence and interpretability of their predictions. Most attempts to explain deep features are visualization techniques that are often open to interpretation. Instead of relying only on visualizations, we use the outputs of hidden layers to predict face attributes. The obtained performance is an indicator of how well the attribute is implicitly learned in that layer of the network. Using a variable selection technique, we also analyze how these semantic concepts are distributed inside each layer, establishing the precise location of relevant neurons for each attribute. According to our experiments, gender, eyeglasses and hat usage can be predicted with over 96% accuracy even when only a single neural output is used to predict each attribute. These performances are less than 3 percentage points lower than the ones achieved by deep supervised face attribute networks. In summary, our experiments show that, inside DCNNs optimized for face identification, there exists latent neurons encoding face attributes almost as accurately as DCNNs optimized for these attributes.
△ Less
Submitted 14 May, 2021;
originally announced May 2021.
-
Open-set Face Recognition for Small Galleries Using Siamese Networks
Authors:
Gabriel Salomon,
Alceu Britto,
Rafael H. Vareto,
William R. Schwartz,
David Menotti
Abstract:
Face recognition has been one of the most relevant and explored fields of Biometrics. In real-world applications, face recognition methods usually must deal with scenarios where not all probe individuals were seen during the training phase (open-set scenarios). Therefore, open-set face recognition is a subject of increasing interest as it deals with identifying individuals in a space where not all…
▽ More
Face recognition has been one of the most relevant and explored fields of Biometrics. In real-world applications, face recognition methods usually must deal with scenarios where not all probe individuals were seen during the training phase (open-set scenarios). Therefore, open-set face recognition is a subject of increasing interest as it deals with identifying individuals in a space where not all faces are known in advance. This is useful in several applications, such as access authentication, on which only a few individuals that have been previously enrolled in a gallery are allowed. The present work introduces a novel approach towards open-set face recognition focusing on small galleries and in enrollment detection, not identity retrieval. A Siamese Network architecture is proposed to learn a model to detect if a face probe is enrolled in the gallery based on a verification-like approach. Promising results were achieved for small galleries on experiments carried out on Pubfig83, FRGCv1 and LFW datasets. State-of-the-art methods like HFCN and HPLS were outperformed on FRGCv1. Besides, a new evaluation protocol is introduced for experiments in small galleries on LFW.
△ Less
Submitted 14 May, 2021;
originally announced May 2021.
-
Stage-Wise Neural Architecture Search
Authors:
Artur Jordao,
Fernando Akio,
Maiko Lie,
William Robson Schwartz
Abstract:
Modern convolutional networks such as ResNet and NASNet have achieved state-of-the-art results in many computer vision applications. These architectures consist of stages, which are sets of layers that operate on representations in the same resolution. It has been demonstrated that increasing the number of layers in each stage improves the prediction ability of the network. However, the resulting…
▽ More
Modern convolutional networks such as ResNet and NASNet have achieved state-of-the-art results in many computer vision applications. These architectures consist of stages, which are sets of layers that operate on representations in the same resolution. It has been demonstrated that increasing the number of layers in each stage improves the prediction ability of the network. However, the resulting architecture becomes computationally expensive in terms of floating point operations, memory requirements and inference time. Thus, significant human effort is necessary to evaluate different trade-offs between depth and performance. To handle this problem, recent works have proposed to automatically design high-performance architectures, mainly by means of neural architecture search (NAS). Current NAS strategies analyze a large set of possible candidate architectures and, hence, require vast computational resources and take many GPUs days. Motivated by this, we propose a NAS approach to efficiently design accurate and low-cost convolutional architectures and demonstrate that an efficient strategy for designing these architectures is to learn the depth stage-by-stage. For this purpose, our approach increases depth incrementally in each stage taking into account its importance, such that stages with low importance are kept shallow while stages with high importance become deeper. We conduct experiments on the CIFAR and different versions of ImageNet datasets, where we show that architectures discovered by our approach achieve better accuracy and efficiency than human-designed architectures. Additionally, we show that architectures discovered on CIFAR-10 can be successfully transferred to large datasets. Compared to previous NAS approaches, our method is substantially more efficient, as it evaluates one order of magnitude fewer models and yields architectures on par with the state-of-the-art.
△ Less
Submitted 19 October, 2020; v1 submitted 23 April, 2020;
originally announced April 2020.
-
The SWAX Benchmark: Attacking Biometric Systems with Wax Figures
Authors:
Rafael Henrique Vareto,
Araceli Marcia Sandanha,
William Robson Schwartz
Abstract:
A face spoofing attack occurs when an intruder attempts to impersonate someone who carries a gainful authentication clearance. It is a trending topic due to the increasing demand for biometric authentication on mobile devices, high-security areas, among others. This work introduces a new database named Sense Wax Attack dataset (SWAX), comprised of real human and wax figure images and videos that e…
▽ More
A face spoofing attack occurs when an intruder attempts to impersonate someone who carries a gainful authentication clearance. It is a trending topic due to the increasing demand for biometric authentication on mobile devices, high-security areas, among others. This work introduces a new database named Sense Wax Attack dataset (SWAX), comprised of real human and wax figure images and videos that endorse the problem of face spoofing detection. The dataset consists of more than 1800 face images and 110 videos of 55 people/waxworks, arranged in training, validation and test sets with a large range in expression, illumination and pose variations. Experiments performed with baseline methods show that despite the progress in recent years, advanced spoofing methods are still vulnerable to high-quality violation attempts.
△ Less
Submitted 21 October, 2019;
originally announced October 2019.
-
Covariance-free Partial Least Squares: An Incremental Dimensionality Reduction Method
Authors:
Artur Jordao,
Maiko Lie,
Victor Hugo Cunha de Melo,
William Robson Schwartz
Abstract:
Dimensionality reduction plays an important role in computer vision problems since it reduces computational cost and is often capable of yielding more discriminative data representation. In this context, Partial Least Squares (PLS) has presented notable results in tasks such as image classification and neural network optimization. However, PLS is infeasible on large datasets, such as ImageNet, bec…
▽ More
Dimensionality reduction plays an important role in computer vision problems since it reduces computational cost and is often capable of yielding more discriminative data representation. In this context, Partial Least Squares (PLS) has presented notable results in tasks such as image classification and neural network optimization. However, PLS is infeasible on large datasets, such as ImageNet, because it requires all the data to be in memory in advance, which is often impractical due to hardware limitations. Additionally, this requirement prevents us from employing PLS on streaming applications where the data are being continuously generated. Motivated by this, we propose a novel incremental PLS, named Covariance-free Incremental Partial Least Squares (CIPLS), which learns a low-dimensional representation of the data using a single sample at a time. In contrast to other state-of-the-art approaches, instead of adopting a partially-discriminative or SGD-based model, we extend Nonlinear Iterative Partial Least Squares (NIPALS) -- the standard algorithm used to compute PLS -- for incremental processing. Among the advantages of this approach are the preservation of discriminative information across all components, the possibility of employing its score matrices for feature selection, and its computational efficiency. We validate CIPLS on face verification and image classification tasks, where it outperforms several other incremental dimensionality reduction techniques. In the context of feature selection, CIPLS achieves comparable results when compared to state-of-the-art techniques.
△ Less
Submitted 10 November, 2020; v1 submitted 5 October, 2019;
originally announced October 2019.
-
Skeleton Image Representation for 3D Action Recognition based on Tree Structure and Reference Joints
Authors:
Carlos Caetano,
François Brémond,
William Robson Schwartz
Abstract:
In the last years, the computer vision research community has studied on how to model temporal dynamics in videos to employ 3D human action recognition. To that end, two main baseline approaches have been researched: (i) Recurrent Neural Networks (RNNs) with Long-Short Term Memory (LSTM); and (ii) skeleton image representations used as input to a Convolutional Neural Network (CNN). Although RNN ap…
▽ More
In the last years, the computer vision research community has studied on how to model temporal dynamics in videos to employ 3D human action recognition. To that end, two main baseline approaches have been researched: (i) Recurrent Neural Networks (RNNs) with Long-Short Term Memory (LSTM); and (ii) skeleton image representations used as input to a Convolutional Neural Network (CNN). Although RNN approaches present excellent results, such methods lack the ability to efficiently learn the spatial relations between the skeleton joints. On the other hand, the representations used to feed CNN approaches present the advantage of having the natural ability of learning structural information from 2D arrays (i.e., they learn spatial relations from the skeleton joints). To further improve such representations, we introduce the Tree Structure Reference Joints Image (TSRJI), a novel skeleton image representation to be used as input to CNNs. The proposed representation has the advantage of combining the use of reference joints and a tree structure skeleton. While the former incorporates different spatial relationships between the joints, the latter preserves important spatial relations by traversing a skeleton tree with a depth-first order algorithm. Experimental results demonstrate the effectiveness of the proposed representation for 3D action recognition on two datasets achieving state-of-the-art results on the recent NTU RGB+D~120 dataset.
△ Less
Submitted 11 September, 2019;
originally announced September 2019.
-
An Efficient and Layout-Independent Automatic License Plate Recognition System Based on the YOLO detector
Authors:
Rayson Laroca,
Luiz A. Zanlorensi,
Gabriel R. Gonçalves,
Eduardo Todt,
William Robson Schwartz,
David Menotti
Abstract:
This paper presents an efficient and layout-independent Automatic License Plate Recognition (ALPR) system based on the state-of-the-art YOLO object detector that contains a unified approach for license plate (LP) detection and layout classification to improve the recognition results using post-processing rules. The system is conceived by evaluating and optimizing different models, aiming at achiev…
▽ More
This paper presents an efficient and layout-independent Automatic License Plate Recognition (ALPR) system based on the state-of-the-art YOLO object detector that contains a unified approach for license plate (LP) detection and layout classification to improve the recognition results using post-processing rules. The system is conceived by evaluating and optimizing different models, aiming at achieving the best speed/accuracy trade-off at each stage. The networks are trained using images from several datasets, with the addition of various data augmentation techniques, so that they are robust under different conditions. The proposed system achieved an average end-to-end recognition rate of 96.9% across eight public datasets (from five different regions) used in the experiments, outperforming both previous works and commercial systems in the ChineseLP, OpenALPR-EU, SSIG-SegPlate and UFPR-ALPR datasets. In the other datasets, the proposed approach achieved competitive results to those attained by the baselines. Our system also achieved impressive frames per second (FPS) rates on a high-end GPU, being able to perform in real time even when there are four vehicles in the scene. An additional contribution is that we manually labeled 38,351 bounding boxes on 6,239 images from public datasets and made the annotations publicly available to the research community.
△ Less
Submitted 9 March, 2021; v1 submitted 4 September, 2019;
originally announced September 2019.
-
SkeleMotion: A New Representation of Skeleton Joint Sequences Based on Motion Information for 3D Action Recognition
Authors:
Carlos Caetano,
Jessica Sena,
François Brémond,
Jefersson A. dos Santos,
William Robson Schwartz
Abstract:
Due to the availability of large-scale skeleton datasets, 3D human action recognition has recently called the attention of computer vision community. Many works have focused on encoding skeleton data as skeleton image representations based on spatial structure of the skeleton joints, in which the temporal dynamics of the sequence is encoded as variations in columns and the spatial structure of eac…
▽ More
Due to the availability of large-scale skeleton datasets, 3D human action recognition has recently called the attention of computer vision community. Many works have focused on encoding skeleton data as skeleton image representations based on spatial structure of the skeleton joints, in which the temporal dynamics of the sequence is encoded as variations in columns and the spatial structure of each frame is represented as rows of a matrix. To further improve such representations, we introduce a novel skeleton image representation to be used as input of Convolutional Neural Networks (CNNs), named SkeleMotion. The proposed approach encodes the temporal dynamics by explicitly computing the magnitude and orientation values of the skeleton joints. Different temporal scales are employed to compute motion values to aggregate more temporal dynamics to the representation making it able to capture longrange joint interactions involved in actions as well as filtering noisy motion values. Experimental results demonstrate the effectiveness of the proposed representation on 3D action recognition outperforming the state-of-the-art on NTU RGB+D 120 dataset.
△ Less
Submitted 30 July, 2019;
originally announced July 2019.
-
Convolutional Neural Networks for Automatic Meter Reading
Authors:
Rayson Laroca,
Victor Barroso,
Matheus A. Diniz,
Gabriel R. Gonçalves,
William Robson Schwartz,
David Menotti
Abstract:
In this paper, we tackle Automatic Meter Reading (AMR) by leveraging the high capability of Convolutional Neural Networks (CNNs). We design a two-stage approach that employs the Fast-YOLO object detector for counter detection and evaluates three different CNN-based approaches for counter recognition. In the AMR literature, most datasets are not available to the research community since the images…
▽ More
In this paper, we tackle Automatic Meter Reading (AMR) by leveraging the high capability of Convolutional Neural Networks (CNNs). We design a two-stage approach that employs the Fast-YOLO object detector for counter detection and evaluates three different CNN-based approaches for counter recognition. In the AMR literature, most datasets are not available to the research community since the images belong to a service company. In this sense, we introduce a new public dataset, called UFPR-AMR dataset, with 2,000 fully and manually annotated images. This dataset is, to the best of our knowledge, three times larger than the largest public dataset found in the literature and contains a well-defined evaluation protocol to assist the development and evaluation of AMR methods. Furthermore, we propose the use of a data augmentation technique to generate a balanced training set with many more examples to train the CNN models for counter recognition. In the proposed dataset, impressive results were obtained and a detailed speed/accuracy trade-off evaluation of each model was performed. In a public dataset, state-of-the-art results were achieved using less than 200 images for training.
△ Less
Submitted 25 February, 2019;
originally announced February 2019.
-
Pruning Deep Neural Networks using Partial Least Squares
Authors:
Artur Jordao,
Ricardo Kloss,
Fernando Yamada,
William Robson Schwartz
Abstract:
Modern pattern recognition methods are based on convolutional networks since they are able to learn complex patterns that benefit the classification. However, convolutional networks are computationally expensive and require a considerable amount of memory, which limits their deployment on low-power and resource-constrained systems. To handle these problems, recent approaches have proposed pruning…
▽ More
Modern pattern recognition methods are based on convolutional networks since they are able to learn complex patterns that benefit the classification. However, convolutional networks are computationally expensive and require a considerable amount of memory, which limits their deployment on low-power and resource-constrained systems. To handle these problems, recent approaches have proposed pruning strategies that find and remove unimportant neurons (i.e., filters) in these networks. Despite achieving remarkable results, existing pruning approaches are ineffective since the accuracy of the original network is degraded. In this work, we propose a novel approach to efficiently remove filters from convolutional networks. Our approach estimates the filter importance based on its relationship with the class label on a low-dimensional space. This relationship is computed using Partial Least Squares (PLS) and Variable Importance in Projection (VIP). Our method is able to reduce up to 67% of the floating point operations (FLOPs) without penalizing the network accuracy. With a negligible drop in accuracy, we can reduce up to 90% of FLOPs. Additionally, sometimes the method is even able to improve the accuracy compared to original, unpruned, network. We show that employing PLS+VIP as the criterion for detecting the filters to be removed is better than recent feature selection techniques, which have been employed by state-of-the-art pruning methods. Finally, we show that the proposed method achieves the highest FLOPs reduction and the smallest drop in accuracy when compared to state-of-the-art pruning approaches. Codes are available at: https://github.com/arturjordao/PruningNeuralNetworks
△ Less
Submitted 19 September, 2019; v1 submitted 17 October, 2018;
originally announced October 2018.
-
Human Activity Recognition Based on Wearable Sensor Data: A Standardization of the State-of-the-Art
Authors:
Artur Jordao,
Antonio C. Nazare Jr.,
Jessica Sena,
William Robson Schwartz
Abstract:
Human activity recognition based on wearable sensor data has been an attractive research topic due to its application in areas such as healthcare and smart environments. In this context, many works have presented remarkable results using accelerometer, gyroscope and magnetometer data to represent the activities categories. However, current studies do not consider important issues that lead to skew…
▽ More
Human activity recognition based on wearable sensor data has been an attractive research topic due to its application in areas such as healthcare and smart environments. In this context, many works have presented remarkable results using accelerometer, gyroscope and magnetometer data to represent the activities categories. However, current studies do not consider important issues that lead to skewed results, making it hard to assess the quality of sensor-based human activity recognition and preventing a direct comparison of previous works. These issues include the samples generation processes and the validation protocols used. We emphasize that in other research areas, such as image classification and object detection, these issues are already well-defined, which brings more efforts towards the application. Inspired by this, we conduct an extensive set of experiments that analyze different sample generation processes and validation protocols to indicate the vulnerable points in human activity recognition based on wearable sensor data. For this purpose, we implement and evaluate several top-performance methods, ranging from handcrafted-based approaches to convolutional neural networks. According to our study, most of the experimental evaluations that are currently employed are not adequate to perform the activity recognition in the context of wearable sensor data, in which the recognition accuracy drops considerably when compared to an appropriate evaluation approach. To the best of our knowledge, this is the first study that tackles essential issues that compromise the understanding of the performance in human activity recognition based on wearable sensor data.
△ Less
Submitted 1 February, 2019; v1 submitted 13 June, 2018;
originally announced June 2018.
-
A Content-Based Late Fusion Approach Applied to Pedestrian Detection
Authors:
Jessica Sena,
Artur Jordao,
William Robson Schwartz
Abstract:
The variety of pedestrians detectors proposed in recent years has encouraged some works to fuse pedestrian detectors to achieve a more accurate detection. The intuition behind is to combine the detectors based on its spatial consensus. We propose a novel method called Content-Based Spatial Consensus (CSBC), which, in addition to relying on spatial consensus, considers the content of the detection…
▽ More
The variety of pedestrians detectors proposed in recent years has encouraged some works to fuse pedestrian detectors to achieve a more accurate detection. The intuition behind is to combine the detectors based on its spatial consensus. We propose a novel method called Content-Based Spatial Consensus (CSBC), which, in addition to relying on spatial consensus, considers the content of the detection windows to learn a weighted-fusion of pedestrian detectors. The result is a reduction in false alarms and an enhancement in the detection. In this work, we also demonstrate that there is small influence of the feature used to learn the contents of the windows of each detector, which enables our method to be efficient even employing simple features. The CSBC overcomes state-of-the-art fusion methods in the ETH dataset and in the Caltech dataset. Particularly, our method is more efficient since fewer detectors are necessary to achieve expressive results.
△ Less
Submitted 8 June, 2018;
originally announced June 2018.
-
Dynamic Multi-Context Segmentation of Remote Sensing Images based on Convolutional Networks
Authors:
Keiller Nogueira,
Mauro Dalla Mura,
Jocelyn Chanussot,
William R. Schwartz,
Jefersson A. dos Santos
Abstract:
Semantic segmentation requires methods capable of learning high-level features while dealing with large volume of data. Towards such goal, Convolutional Networks can learn specific and adaptable features based on the data. However, these networks are not capable of processing a whole remote sensing image, given its huge size. To overcome such limitation, the image is processed using fixed size pat…
▽ More
Semantic segmentation requires methods capable of learning high-level features while dealing with large volume of data. Towards such goal, Convolutional Networks can learn specific and adaptable features based on the data. However, these networks are not capable of processing a whole remote sensing image, given its huge size. To overcome such limitation, the image is processed using fixed size patches. The definition of the input patch size is usually performed empirically (evaluating several sizes) or imposed (by network constraint). Both strategies suffer from drawbacks and could not lead to the best patch size. To alleviate this problem, several works exploited multi-context information by combining networks or layers. This process increases the number of parameters resulting in a more difficult model to train. In this work, we propose a novel technique to perform semantic segmentation of remote sensing images that exploits a multi-context paradigm without increasing the number of parameters while defining, in training time, the best patch size. The main idea is to train a dilated network with distinct patch sizes, allowing it to capture multi-context characteristics from heterogeneous contexts. While processing these varying patches, the network provides a score for each patch size, hel** in the definition of the best size for the current scenario. A systematic evaluation of the proposed algorithm is conducted using four high-resolution remote sensing datasets with very distinct properties. Our results show that the proposed algorithm provides improvements in pixelwise classification accuracy when compared to state-of-the-art methods.
△ Less
Submitted 22 April, 2019; v1 submitted 11 April, 2018;
originally announced April 2018.
-
A Robust Real-Time Automatic License Plate Recognition Based on the YOLO Detector
Authors:
Rayson Laroca,
Evair Severo,
Luiz A. Zanlorensi,
Luiz S. Oliveira,
Gabriel Resende Gonçalves,
William Robson Schwartz,
David Menotti
Abstract:
Automatic License Plate Recognition (ALPR) has been a frequent topic of research due to many practical applications. However, many of the current solutions are still not robust in real-world situations, commonly depending on many constraints. This paper presents a robust and efficient ALPR system based on the state-of-the-art YOLO object detector. The Convolutional Neural Networks (CNNs) are train…
▽ More
Automatic License Plate Recognition (ALPR) has been a frequent topic of research due to many practical applications. However, many of the current solutions are still not robust in real-world situations, commonly depending on many constraints. This paper presents a robust and efficient ALPR system based on the state-of-the-art YOLO object detector. The Convolutional Neural Networks (CNNs) are trained and fine-tuned for each ALPR stage so that they are robust under different conditions (e.g., variations in camera, lighting, and background). Specially for character segmentation and recognition, we design a two-stage approach employing simple data augmentation tricks such as inverted License Plates (LPs) and flipped characters. The resulting ALPR approach achieved impressive results in two datasets. First, in the SSIG dataset, composed of 2,000 frames from 101 vehicle videos, our system achieved a recognition rate of 93.53% and 47 Frames Per Second (FPS), performing better than both Sighthound and OpenALPR commercial systems (89.80% and 93.03%, respectively) and considerably outperforming previous results (81.80%). Second, targeting a more realistic scenario, we introduce a larger public dataset, called UFPR-ALPR dataset, designed to ALPR. This dataset contains 150 videos and 4,500 frames captured when both camera and vehicles are moving and also contains different types of vehicles (cars, motorcycles, buses and trucks). In our proposed dataset, the trial versions of commercial systems achieved recognition rates below 70%. On the other hand, our system performed better, with recognition rate of 78.33% and 35 FPS.
△ Less
Submitted 28 April, 2018; v1 submitted 26 February, 2018;
originally announced February 2018.
-
Latent hypernet: Exploring all Layers from Convolutional Neural Networks
Authors:
Artur Jordao,
Ricardo Kloss,
William Robson Schwartz
Abstract:
Since Convolutional Neural Networks (ConvNets) are able to simultaneously learn features and classifiers to discriminate different categories of activities, recent works have employed ConvNets approaches to perform human activity recognition (HAR) based on wearable sensors, allowing the removal of expensive human work and expert knowledge. However, these approaches have their power of discriminati…
▽ More
Since Convolutional Neural Networks (ConvNets) are able to simultaneously learn features and classifiers to discriminate different categories of activities, recent works have employed ConvNets approaches to perform human activity recognition (HAR) based on wearable sensors, allowing the removal of expensive human work and expert knowledge. However, these approaches have their power of discrimination limited mainly by the large number of parameters that compose the network and the reduced number of samples available for training. Inspired by this, we propose an accurate and robust approach, referred to as Latent HyperNet (LHN). The LHN uses feature maps from early layers (hyper) and projects them, individually, onto a low dimensionality space (latent). Then, these latent features are concatenated and presented to a classifier. To demonstrate the robustness and accuracy of the LHN, we evaluate it using four different networks architectures in five publicly available HAR datasets based on wearable sensors, which vary in the sampling rate and number of activities. Our experiments demonstrate that the proposed LHN is able to produce rich information, improving the results regarding the original ConvNets. Furthermore, the method outperforms existing state-of-the-art methods.
△ Less
Submitted 16 November, 2018; v1 submitted 7 November, 2017;
originally announced November 2017.
-
Activity Recognition based on a Magnitude-Orientation Stream Network
Authors:
Carlos Caetano,
Victor H. C. de Melo,
Jefersson A. dos Santos,
William Robson Schwartz
Abstract:
The temporal component of videos provides an important clue for activity recognition, as a number of activities can be reliably recognized based on the motion information. In view of that, this work proposes a novel temporal stream for two-stream convolutional networks based on images computed from the optical flow magnitude and orientation, named Magnitude-Orientation Stream (MOS), to learn the m…
▽ More
The temporal component of videos provides an important clue for activity recognition, as a number of activities can be reliably recognized based on the motion information. In view of that, this work proposes a novel temporal stream for two-stream convolutional networks based on images computed from the optical flow magnitude and orientation, named Magnitude-Orientation Stream (MOS), to learn the motion in a better and richer manner. Our method applies simple nonlinear transformations on the vertical and horizontal components of the optical flow to generate input images for the temporal stream. Experimental results, carried on two well-known datasets (HMDB51 and UCF101), demonstrate that using our proposed temporal stream as input to existing neural network architectures can improve their performance for activity recognition. Results demonstrate that our temporal stream provides complementary information able to improve the classical two-stream methods, indicating the suitability of our approach to be used as a temporal video representation.
△ Less
Submitted 22 August, 2017;
originally announced August 2017.
-
Kernel Cross-View Collaborative Representation based Classification for Person Re-Identification
Authors:
Raphael Prates,
William Robson Schwartz
Abstract:
Person re-identification aims at the maintenance of a global identity as a person moves among non-overlap** surveillance cameras. It is a hard task due to different illumination conditions, viewpoints and the small number of annotated individuals from each pair of cameras (small-sample-size problem). Collaborative Representation based Classification (CRC) has been employed successfully to addres…
▽ More
Person re-identification aims at the maintenance of a global identity as a person moves among non-overlap** surveillance cameras. It is a hard task due to different illumination conditions, viewpoints and the small number of annotated individuals from each pair of cameras (small-sample-size problem). Collaborative Representation based Classification (CRC) has been employed successfully to address the small-sample-size problem in computer vision. However, the original CRC formulation is not well-suited for person re-identification since it does not consider that probe and gallery samples are from different cameras. Furthermore, it is a linear model, while appearance changes caused by different camera conditions indicate a strong nonlinear transition between cameras. To overcome such limitations, we propose the Kernel Cross-View Collaborative Representation based Classification (Kernel X-CRC) that represents probe and gallery images by balancing representativeness and similarity nonlinearly. It assumes that a probe and its corresponding gallery image are represented with similar coding vectors using individuals from the training set. Experimental results demonstrate that our assumption is true when using a high-dimensional feature vector and becomes more compelling when dealing with a low-dimensional and discriminative representation computed using a common subspace learning method. We achieve state-of-the-art for rank-1 matching rates in two person re-identification datasets (PRID450S and GRID) and the second best results on VIPeR and CUHK01 datasets.
△ Less
Submitted 21 November, 2016;
originally announced November 2016.
-
Meat adulteration detection through digital image analysis of histological cuts using LBP
Authors:
João J. de Macedo Neto,
Jefersson A. dos Santos,
William Robson Schwartz
Abstract:
Food fraud has been an area of great concern due to its risk to public health, reduction of food quality or nutritional value and for its economic consequences. For this reason, it's been object of regulation in many countries (e.g. [1], [2]). One type of food that has been frequently object of fraud through the addition of water or an aqueous solution is bovine meat. The traditional methods used…
▽ More
Food fraud has been an area of great concern due to its risk to public health, reduction of food quality or nutritional value and for its economic consequences. For this reason, it's been object of regulation in many countries (e.g. [1], [2]). One type of food that has been frequently object of fraud through the addition of water or an aqueous solution is bovine meat. The traditional methods used to detect this kind of fraud are expensive, time-consuming and depend on physicochemical analysis that require complex laboratory techniques, specific for each added substance. In this paper, based on digital images of histological cuts of adulterated and not-adulterated (normal) bovine meat, we evaluate the of digital image analysis methods to identify the aforementioned kind of fraud, with focus on the Local Binary Pattern (LBP) algorithm.
△ Less
Submitted 7 November, 2016;
originally announced November 2016.
-
Benchmark for License Plate Character Segmentation
Authors:
Gabriel Resende Gonçalves,
Sirlene Pio Gomes da Silva,
David Menotti,
William Robson Schwartz
Abstract:
Automatic License Plate Recognition (ALPR) has been the focus of many researches in the past years. In general, ALPR is divided into the following problems: detection of on-track vehicles, license plates detection, segmention of license plate characters and optical character recognition (OCR). Even though commercial solutions are available for controlled acquisition conditions, e.g., the entrance…
▽ More
Automatic License Plate Recognition (ALPR) has been the focus of many researches in the past years. In general, ALPR is divided into the following problems: detection of on-track vehicles, license plates detection, segmention of license plate characters and optical character recognition (OCR). Even though commercial solutions are available for controlled acquisition conditions, e.g., the entrance of a parking lot, ALPR is still an open problem when dealing with data acquired from uncontrolled environments, such as roads and highways when relying only on imaging sensors. Due to the multiple orientations and scales of the license plates captured by the camera, a very challenging task of the ALPR is the License Plate Character Segmentation (LPCS) step, which effectiveness is required to be (near) optimal to achieve a high recognition rate by the OCR. To tackle the LPCS problem, this work proposes a novel benchmark composed of a dataset designed to focus specifically on the character segmentation step of the ALPR within an evaluation protocol. Furthermore, we propose the Jaccard-Centroid coefficient, a new evaluation measure more suitable than the Jaccard coefficient regarding the location of the bounding box within the ground-truth annotation. The dataset is composed of 2,000 Brazilian license plates consisting of 14,000 alphanumeric symbols and their corresponding bounding box annotations. We also present a new straightforward approach to perform LPCS efficiently. Finally, we provide an experimental evaluation for the dataset based on four LPCS approaches and demonstrate the importance of character segmentation for achieving an accurate OCR.
△ Less
Submitted 31 October, 2016; v1 submitted 11 July, 2016;
originally announced July 2016.
-
A Mid-level Video Representation based on Binary Descriptors: A Case Study for Pornography Detection
Authors:
Carlos Caetano,
Sandra Avila,
William Robson Schwartz,
Silvio Jamil F. Guimarães,
Arnaldo de A. Araújo
Abstract:
With the growing amount of inappropriate content on the Internet, such as pornography, arises the need to detect and filter such material. The reason for this is given by the fact that such content is often prohibited in certain environments (e.g., schools and workplaces) or for certain publics (e.g., children). In recent years, many works have been mainly focused on detecting pornographic images…
▽ More
With the growing amount of inappropriate content on the Internet, such as pornography, arises the need to detect and filter such material. The reason for this is given by the fact that such content is often prohibited in certain environments (e.g., schools and workplaces) or for certain publics (e.g., children). In recent years, many works have been mainly focused on detecting pornographic images and videos based on visual content, particularly on the detection of skin color. Although these approaches provide good results, they generally have the disadvantage of a high false positive rate since not all images with large areas of skin exposure are necessarily pornographic images, such as people wearing swimsuits or images related to sports. Local feature based approaches with Bag-of-Words models (BoW) have been successfully applied to visual recognition tasks in the context of pornography detection. Even though existing methods provide promising results, they use local feature descriptors that require a high computational processing time yielding high-dimensional vectors. In this work, we propose an approach for pornography detection based on local binary feature extraction and BossaNova image representation, a BoW model extension that preserves more richly the visual information. Moreover, we propose two approaches for video description based on the combination of mid-level representations namely BossaNova Video Descriptor (BNVD) and BoW Video Descriptor (BoW-VD). The proposed techniques are promising, achieving an accuracy of 92.40%, thus reducing the classification error by 16% over the current state-of-the-art local features approach on the Pornography dataset.
△ Less
Submitted 12 May, 2016;
originally announced May 2016.
-
Deep Representations for Iris, Face, and Fingerprint Spoofing Detection
Authors:
David Menotti,
Giovani Chiachia,
Allan Pinto,
William Robson Schwartz,
Helio Pedrini,
Alexandre Xavier Falcao,
Anderson Rocha
Abstract:
Biometrics systems have significantly improved person identification and authentication, playing an important role in personal, national, and global security. However, these systems might be deceived (or "spoofed") and, despite the recent advances in spoofing detection, current solutions often rely on domain knowledge, specific biometric reading systems, and attack types. We assume a very limited…
▽ More
Biometrics systems have significantly improved person identification and authentication, playing an important role in personal, national, and global security. However, these systems might be deceived (or "spoofed") and, despite the recent advances in spoofing detection, current solutions often rely on domain knowledge, specific biometric reading systems, and attack types. We assume a very limited knowledge about biometric spoofing at the sensor to derive outstanding spoofing detection systems for iris, face, and fingerprint modalities based on two deep learning approaches. The first approach consists of learning suitable convolutional network architectures for each domain, while the second approach focuses on learning the weights of the network via back-propagation. We consider nine biometric spoofing benchmarks --- each one containing real and fake samples of a given biometric modality and attack type --- and learn deep representations for each benchmark by combining and contrasting the two learning approaches. This strategy not only provides better comprehension of how these approaches interplay, but also creates systems that exceed the best known results in eight out of the nine benchmarks. The results strongly indicate that spoofing detection systems based on convolutional networks can be robust to attacks already known and possibly adapted, with little effort, to image-based attacks that are yet to come.
△ Less
Submitted 29 January, 2015; v1 submitted 8 October, 2014;
originally announced October 2014.
-
Brazilian License Plate Detection Using Histogram of Oriented Gradients and Sliding Windows
Authors:
R. F. Prates,
G. Cámara-Chávez,
William R. Schwartz,
D. Menotti
Abstract:
Due to the increasingly need for automatic traffic monitoring, vehicle license plate detection is of high interest to perform automatic toll collection, traffic law enforcement, parking lot access control, among others. In this paper, a sliding window approach based on Histogram of Oriented Gradients (HOG) features is used for Brazilian license plate detection. This approach consists in scanning t…
▽ More
Due to the increasingly need for automatic traffic monitoring, vehicle license plate detection is of high interest to perform automatic toll collection, traffic law enforcement, parking lot access control, among others. In this paper, a sliding window approach based on Histogram of Oriented Gradients (HOG) features is used for Brazilian license plate detection. This approach consists in scanning the whole image in a multiscale fashion such that the license plate is located precisely. The main contribution of this work consists in a deep study of the best setup for HOG descriptors on the detection of Brazilian license plates, in which HOG have never been applied before. We also demonstrate the reliability of this method ensured by a recall higher than 98% (with a precision higher than 78%) in a publicly available data set.
△ Less
Submitted 9 January, 2014;
originally announced January 2014.
