Showing 1–38 of 38 results for author: Schwab, K

Fabrication of a Monolithic 5-Meter Aluminum Reflector for Millimeter-Wavelength Observations of the Cosmic Microwave Background

Authors: Tyler Natoli, Bradford Benson, John Carlstrom, Eric Chauvin, Bruno Clavel, Nick Emerson, Patricio Gallardo, Mike Niemack, Steve Padin, Klaus Schwab, Lutz Stenvers, Jeff Zivick

Abstract: We have demonstrated the fabrication of a monolithic, 5-meter diameter, aluminum reflector with 17.4 $μ$m RMS surface error. The reflector was designed to avoid the problem of pickup due to scattering from panel gaps in a large, millimeter-wavelength telescope that will be used for measurements on the cosmic microwave background. We have demonstrated the fabrication of a monolithic, 5-meter diameter, aluminum reflector with 17.4 $μ$m RMS surface error. The reflector was designed to avoid the problem of pickup due to scattering from panel gaps in a large, millimeter-wavelength telescope that will be used for measurements on the cosmic microwave background. △ Less

Submitted 3 April, 2023; originally announced April 2023.

Hot Carrier Thermalization and Josephson Inductance Thermometry in a Graphene-based Microwave Circuit

Authors: Raj Katti, Harpreet Arora, Olli-Pentti Saira, Kenji Watanabe, Takashi Taniguchi, Keith C. Schwab, Michael Roukes, Stevan Nadj-Perge

Abstract: Due to its exceptional electronic and thermal properties, graphene is a key material for bolometry, calorimetry, and photon detection. However, despite graphene's relatively simple electronic structure, the physical processes responsible for the transport of heat from the electrons to the lattice are experimentally still elusive. Here, we measure the thermal response of low-disorder graphene encap… ▽ More Due to its exceptional electronic and thermal properties, graphene is a key material for bolometry, calorimetry, and photon detection. However, despite graphene's relatively simple electronic structure, the physical processes responsible for the transport of heat from the electrons to the lattice are experimentally still elusive. Here, we measure the thermal response of low-disorder graphene encapsulated in hexagonal boron nitride (hBN) by integrating it within a multi-terminal superconducting device coupled to a microwave resonator. This technique allows us to simultaneously apply Joule heat power to the graphene flake while performing calibrated readout of the electron temperature. We probe the thermalization rates of both electrons and holes with high precision and observe a thermalization scaling exponent consistent with cooling dominated by resonant electron-phonon coupling processes occurring at the interface between graphene and superconducting leads. The technique utilized here is applicable for wide range of semiconducting-superconducting interface heterostructures and provides new insights into the thermalization pathways essential for the next-generation thermal detectors. △ Less

Submitted 29 August, 2022; originally announced August 2022.

Comments: main text and supplementary information

Quantum Sensing for High Energy Physics

Authors: Zeeshan Ahmed, Yuri Alexeev, Giorgio Apollinari, Asimina Arvanitaki, David Awschalom, Karl K. Berggren, Karl Van Bibber, Przemyslaw Bienias, Geoffrey Bodwin, Malcolm Boshier, Daniel Bowring, Davide Braga, Karen Byrum, Gustavo Cancelo, Gianpaolo Carosi, Tom Cecil, Clarence Chang, Mattia Checchin, Sergei Chekanov, Aaron Chou, Aashish Clerk, Ian Cloet, Michael Crisler, Marcel Demarteau, Ranjan Dharmapalan , et al. (91 additional authors not shown)

Abstract: Report of the first workshop to identify approaches and techniques in the domain of quantum sensing that can be utilized by future High Energy Physics applications to further the scientific goals of High Energy Physics. Report of the first workshop to identify approaches and techniques in the domain of quantum sensing that can be utilized by future High Energy Physics applications to further the scientific goals of High Energy Physics. △ Less

Submitted 29 March, 2018; originally announced March 2018.

Comments: 38 pages, report of the first workshop on Quantum Sensing for High Energy Physics, held at Argonne National Laboratory, December 12-14, 2017

Anfrage-getriebener Wissenstransfer zur Unterstuetzung von Datenanalysten

Authors: Andreas M. Wahl, Gregor Endler, Peter K. Schwab, Sebastian Herbst, Richard Lenz

Abstract: In larger organizations, multiple teams of data scientists have to integrate data from heterogeneous data sources as preparation for data analysis tasks. Writing effective analytical queries requires data scientists to have in-depth knowledge of the existence, semantics, and usage context of data sources. Once gathered, such knowledge is informally shared within a specific team of data scientists,… ▽ More In larger organizations, multiple teams of data scientists have to integrate data from heterogeneous data sources as preparation for data analysis tasks. Writing effective analytical queries requires data scientists to have in-depth knowledge of the existence, semantics, and usage context of data sources. Once gathered, such knowledge is informally shared within a specific team of data scientists, but usually is neither formalized nor shared with other teams. Potential synergies remain unused. We therefore introduce a novel approach which extends data management systems with additional knowledge-sharing capabilities to facilitate user collaboration without altering established data analysis workflows. Relevant collective knowledge from the query log is extracted to support data source discovery and incremental data integration. Extracted knowledge is formalized and provided at query time. △ Less

Submitted 20 October, 2016; originally announced October 2016.

Comments: in German

Ultra-high Q Acoustic Resonance in Superfluid 4He

Authors: L. A. DeLorenzo, K. C. Schwab

Abstract: We report the measurement of the acoustic quality factor of a gram-scale, kilo-hertz frequency superfluid resonator, detected through the parametric coupling to a superconducting niobium microwave cavity. For temperature between 400mK and 50mK, we observe a $T^{-4}$ temperature dependence of the quality factor, consistent with a 3-phonon dissipation mechanism. We observe Q factors up to… ▽ More We report the measurement of the acoustic quality factor of a gram-scale, kilo-hertz frequency superfluid resonator, detected through the parametric coupling to a superconducting niobium microwave cavity. For temperature between 400mK and 50mK, we observe a $T^{-4}$ temperature dependence of the quality factor, consistent with a 3-phonon dissipation mechanism. We observe Q factors up to $1.4\cdot10^8$, consistent with the dissipation due to dilute $^3$He impurities, and expect that significant further improvements are possible. These experiments are relevant to exploring quantum behavior and decoherence of massive macroscopic objects, the laboratory detection of continuous wave gravitational waves from pulsars, and the probing of possible limits to physical length scales. △ Less

Submitted 26 July, 2016; originally announced July 2016.

Comments: 5 pages, 2 figures

Detecting continuous gravitational waves with superfluid $^4$He

Authors: S. Singh, L. A. De Lorenzo, I. Pikovski, K. C. Schwab

Abstract: Direct detection of gravitational waves is opening a new window onto our universe. Here, we study the sensitivity to continuous-wave strain fields of a kg-scale optomechanical system formed by the acoustic motion of superfluid helium-4 parametrically coupled to a superconducting microwave cavity. This narrowband detection scheme can operate at very high $Q$-factors, while the resonant frequency is… ▽ More Direct detection of gravitational waves is opening a new window onto our universe. Here, we study the sensitivity to continuous-wave strain fields of a kg-scale optomechanical system formed by the acoustic motion of superfluid helium-4 parametrically coupled to a superconducting microwave cavity. This narrowband detection scheme can operate at very high $Q$-factors, while the resonant frequency is tunable through pressurization of the helium in the 0.1-1.5 kHz range. The detector can therefore be tuned to a variety of astrophysical sources and can remain sensitive to a particular source over a long period of time. For reasonable experimental parameters, we find that strain fields on the order of $h\sim 10^{-23} /\sqrt{\rm Hz}$ are detectable. We show that the proposed system can significantly improve the limits on gravitational wave strain from nearby pulsars within a few months of integration time. △ Less

Submitted 15 June, 2016; originally announced June 2016.

Quantum nondemolition measurement of mechanical squeezed state beyond the 3 dB limit

Authors: C. U. Lei, A. J. Weinstein, J. Suh, E. E. Wollman, A. Kronwald, F. Marquardt, A. A. Clerk, K. C. Schwab

Abstract: We use a reservoir engineering technique based on two-tone driving to generate and stabilize a quantum squeezed state of a micron-scale mechanical oscillator in a microwave optomechanical system. Using an independent backaction evading measurement to directly quantify the squeezing, we observe $4.7\pm0.9$ dB of squeezing below the zero-point level, surpassing the 3 dB limit of standard parametric… ▽ More We use a reservoir engineering technique based on two-tone driving to generate and stabilize a quantum squeezed state of a micron-scale mechanical oscillator in a microwave optomechanical system. Using an independent backaction evading measurement to directly quantify the squeezing, we observe $4.7\pm0.9$ dB of squeezing below the zero-point level, surpassing the 3 dB limit of standard parametric squeezing techniques. Our measurements also reveal evidence for an additional mechanical parametric effect. The interplay between this effect and the optomechanical interaction enhances the amount of squeezing obtained in the experiment. △ Less

Submitted 26 May, 2016; v1 submitted 26 May, 2016; originally announced May 2016.

Journal ref: Phys. Rev. Lett. 117, 100801 (2016)

Quantum squeezing of motion in a mechanical resonator

Authors: E. E. Wollman, C. U. Lei, A. J. Weinstein, J. Suh, A. Kronwald, F. Marquardt, A. A. Clerk, K. C. Schwab

Abstract: As a result of the quantum, wave-like nature of the physical world, a harmonic oscillator can never be completely at rest. Even in the quantum ground state, its position will always have fluctuations, called the zero-point motion. Although the zero-point fluctuations are unavoidable, they can be manipulated. In this work, using microwave frequency radiation pressure, we both prepare a micron-scale… ▽ More As a result of the quantum, wave-like nature of the physical world, a harmonic oscillator can never be completely at rest. Even in the quantum ground state, its position will always have fluctuations, called the zero-point motion. Although the zero-point fluctuations are unavoidable, they can be manipulated. In this work, using microwave frequency radiation pressure, we both prepare a micron-scale mechanical system in a state near the quantum ground state and then manipulate its thermal fluctuations to produce a stationary, quadrature-squeezed state. We deduce that the variance of one motional quadrature is 0.80 times the zero-point level, or 1 dB of sub-zero-point squeezing. This work is relevant to the quantum engineering of states of matter at large length scales, the study of decoherence of large quantum systems, and for the realization of ultra-sensitive sensing of force and motion. △ Less

Submitted 6 July, 2015; originally announced July 2015.

Journal ref: Science 349, 952 (2015)

Macroscopic quantum resonators (MAQRO): 2015 Update

Authors: Rainer Kaltenbaek, Markus Arndt, Markus Aspelmeyer, Peter F. Barker, Angelo Bassi, James Bateman, Kai Bongs, Sougato Bose, Claus Braxmaier, Časlav Brukner, Bruno Christophe, Michael Chwalla, Pierre-François Cohadon, Adrian M. Cruise, Catalina Curceanu, Kishan Dholakia, Klaus Döringshoff, Wolfgang Ertmer, Jan Gieseler, Norman Gürlebeck, Gerald Hechenblaikner, Antoine Heidmann, Sven Herrmann, Sabine Hossenfelder, Ulrich Johann , et al. (27 additional authors not shown)

Abstract: Do the laws of quantum physics still hold for macroscopic objects - this is at the heart of Schrödinger's cat paradox - or do gravitation or yet unknown effects set a limit for massive particles? What is the fundamental relation between quantum physics and gravity? Ground-based experiments addressing these questions may soon face limitations due to limited free-fall times and the quality of vacuum… ▽ More Do the laws of quantum physics still hold for macroscopic objects - this is at the heart of Schrödinger's cat paradox - or do gravitation or yet unknown effects set a limit for massive particles? What is the fundamental relation between quantum physics and gravity? Ground-based experiments addressing these questions may soon face limitations due to limited free-fall times and the quality of vacuum and microgravity. The proposed mission MAQRO may overcome these limitations and allow addressing those fundamental questions. MAQRO harnesses recent developments in quantum optomechanics, high-mass matter-wave interferometry as well as state-of-the-art space technology to push macroscopic quantum experiments towards their ultimate performance limits and to open new horizons for applying quantum technology in space. The main scientific goal of MAQRO is to probe the vastly unexplored "quantum-classical" transition for increasingly massive objects, testing the predictions of quantum theory for truly macroscopic objects in a size and mass regime unachievable in ground-based experiments. The hardware for the mission will largely be based on available space technology. Here, we present the MAQRO proposal submitted in response to the (M4) Cosmic Vision call of the European Space Agency for a medium-size mission opportunity with a possible launch in 2025. △ Less

Submitted 9 March, 2015; originally announced March 2015.

Comments: 38 pages, 10 tables, 23 figures

Journal ref: EPJ Quantum Technology 3, 5 (2016)

Mesoscopic Mechanical Resonators as Quantum Non-Inertial Reference Frames

Authors: B. N. Katz, M. P. Blencowe, K. C. Schwab

Abstract: An atom attached to a micrometer-scale wire that is vibrating at a frequency of 100 MHz and with displacement amplitude 1 nm experiences an acceleration magnitude 10^9 ms^-2, approaching the surface gravity of a neutron star. As one application of such extreme non-inertial forces in a mesoscopic setting, we consider a model two-path atom interferometer with one path consisting of the 100 MHz vibra… ▽ More An atom attached to a micrometer-scale wire that is vibrating at a frequency of 100 MHz and with displacement amplitude 1 nm experiences an acceleration magnitude 10^9 ms^-2, approaching the surface gravity of a neutron star. As one application of such extreme non-inertial forces in a mesoscopic setting, we consider a model two-path atom interferometer with one path consisting of the 100 MHz vibrating wire atom guide. The vibrating wire guide serves as a non-inertial reference frame and induces an in principle measurable phase shift in the wave function of an atom traversing the wire frame. We furthermore consider the effect on the two-path atom wave interference when the vibrating wire is modeled as a quantum object, hence functioning as a quantum non-inertial reference frame. We outline a possible realization of the vibrating wire, atom interferometer using a superfluid helium quantum interference setup. △ Less

Submitted 11 October, 2015; v1 submitted 7 September, 2014; originally announced September 2014.

Comments: Published version

Journal ref: Phys. Rev. A 92, 042104 (2015)

Observation and interpretation of motional sideband asymmetry in a quantum electro-mechanical device

Authors: A. J. Weinstein, C. U. Lei, E. E. Wollman, J. Suh, A. Metelmann, A. A. Clerk, K. C. Schwab

Abstract: Quantum electro-mechanical systems offer a unique opportunity to probe quantum noise properties in macroscopic devices, properties which ultimately stem from the Heisenberg Uncertainty Principle. A simple example of this is expected to occur in a microwave parametric transducer, where mechanical motion generates motional sidebands corresponding to the up and down frequency-conversion of microwave… ▽ More Quantum electro-mechanical systems offer a unique opportunity to probe quantum noise properties in macroscopic devices, properties which ultimately stem from the Heisenberg Uncertainty Principle. A simple example of this is expected to occur in a microwave parametric transducer, where mechanical motion generates motional sidebands corresponding to the up and down frequency-conversion of microwave photons. Due to quantum vacuum noise, the rates of these processes are expected to be unequal. We measure this fundamental imbalance in a microwave transducer coupled to a radio-frequency mechanical mode, cooled near the ground state of motion. We also discuss the subtle origin of this imbalance: depending on the measurement scheme, the imbalance is most naturally attributed to the quantum fluctuations of either the mechanical mode or of the electromagnetic field. △ Less

Submitted 11 April, 2014; originally announced April 2014.

Journal ref: Phys. Rev. X 4, 041003 (2014)

Mechanically Detecting and Avoiding the Quantum Fluctuations of a Microwave Field

Authors: J. Suh, A. J. Weinstein, C. U. Lei, E. E. Wollman, S. K. Steinke, P. Meystre, A. A. Clerk, K. C. Schwab

Abstract: During the theoretical investigation of the ultimate sensitivity of gravitational wave detectors through the 1970's and '80's, it was debated whether quantum fluctuations of the light field used for detection, also known as photon shot noise, would ultimately produce a force noise which would disturb the detector and limit the sensitivity. Carlton Caves famously answered this question with "They d… ▽ More During the theoretical investigation of the ultimate sensitivity of gravitational wave detectors through the 1970's and '80's, it was debated whether quantum fluctuations of the light field used for detection, also known as photon shot noise, would ultimately produce a force noise which would disturb the detector and limit the sensitivity. Carlton Caves famously answered this question with "They do." With this understanding came ideas how to avoid this limitation by giving up complete knowledge of the detector's motion. In these back-action evading (BAE) or quantum non-demolition (QND) schemes, one manipulates the required quantum measurement back-action by placing it into a component of the motion which is unobserved and dynamically isolated. Using a superconducting, electro-mechanical device, we realize a sensitive measurement of a single motional quadrature with imprecision below the zero-point fluctuations of motion, detect both the classical and quantum measurement back-action, and demonstrate BAE avoiding the quantum back-action from the microwave photons by 9 dB. Further improvements of these techniques are expected to provide a practical route to manipulate and prepare a squeezed state of motion with mechanical fluctuations below the quantum zero-point level, which is of interest both fundamentally and for the detection of very weak forces. △ Less

Submitted 14 December, 2013; originally announced December 2013.

Measurement of the electronic thermal conductance channels and heat capacity of graphene at low temperature

Authors: K. C. Fong, Emma Wollman, Harish Ravi, Wei Chen, Aash Clerk, M. D. Shaw, H. G. LeDuc, K. C. Schwab

Abstract: The ability to transport energy is a fundamental property of the two-dimensional Dirac fermions in graphene. Electronic thermal transport in this system is relatively unexplored and is expected to show unique fundamental properties and to play an important role in future applications of graphene, including opto-electronics, plasmonics, and ultra-sensitive bolometry. Here we present measurements of… ▽ More The ability to transport energy is a fundamental property of the two-dimensional Dirac fermions in graphene. Electronic thermal transport in this system is relatively unexplored and is expected to show unique fundamental properties and to play an important role in future applications of graphene, including opto-electronics, plasmonics, and ultra-sensitive bolometry. Here we present measurements of bipolar, electron-diffusion and electron-phonon thermal conductances, and infer the electronic specific heat, with a minimum value of 10 $k_{\rm{B}}$ ($10^{-22}$ JK$^{-1}$) per square micron. We test the validity of the Wiedemann-Franz law and find the Lorenz number equals $1.32\times(π^2/3)(k_{\rm{B}}/e)^2$. The electron-phonon thermal conductance has a temperature power law $T^2$ at high do** levels, and the coupling parameter is consistent with recent theory, indicating its enhancement by impurity scattering. We demonstrate control of the thermal conductance by electrical gating and by suppressing the diffusion channel using superconducting electrodes, which sets the stage for future graphene-based single microwave photon detection. △ Less

Submitted 9 August, 2013; originally announced August 2013.

Superfluid Optomechanics: Coupling of a Superfluid to a Superconducting Condensate

Authors: L. A. DeLorenzo, K. C. Schwab

Abstract: We investigate the low loss acoustic motion of superfluid $^4$He parametrically coupled to a very low loss, superconducting Nb, TE$_{011}$ microwave resonator, forming a gram-scale, sideband resolved, optomechanical system. We demonstrate the detection of a series of acoustic modes with quality factors as high as $7\cdot 10^6$. At higher temperatures, the lowest dissipation modes are limited by an… ▽ More We investigate the low loss acoustic motion of superfluid $^4$He parametrically coupled to a very low loss, superconducting Nb, TE$_{011}$ microwave resonator, forming a gram-scale, sideband resolved, optomechanical system. We demonstrate the detection of a series of acoustic modes with quality factors as high as $7\cdot 10^6$. At higher temperatures, the lowest dissipation modes are limited by an intrinsic three phonon process. Acoustic quality factors approaching $10^{11}$ may be possible in isotopically purified samples at temperatures below 10 mK. A system of this type may be utilized to study macroscopic quantized motion and as an ultra-sensitive sensor of extremely weak displacements and forces, such as continuous gravity wave sources. △ Less

Submitted 9 August, 2013; originally announced August 2013.

Optomechanical back-action evading measurement without parametric instability

Authors: Steven K. Steinke, K. C. Schwab, Pierre Meystre

Abstract: We review a scheme for performing a back-action evading measurement of one mechanical quadrature in an optomechanical setup. The experimental application of this scheme has been limited by parametric instabilities caused in general by a slight dependence of the mechanical frequency on the electromagnetic energy in the cavity. We find that a simple modification to the optical drive can effectively… ▽ More We review a scheme for performing a back-action evading measurement of one mechanical quadrature in an optomechanical setup. The experimental application of this scheme has been limited by parametric instabilities caused in general by a slight dependence of the mechanical frequency on the electromagnetic energy in the cavity. We find that a simple modification to the optical drive can effectively eliminate the parametric instability even at high intracavity power, allowing realistic devices to achieve sub-zero-point uncertainties in the measured quadrature. △ Less

Submitted 9 August, 2013; v1 submitted 24 April, 2013; originally announced April 2013.

Comments: 7 pages, 1 figure, accepted by Phys Rev A

Quantum back-action in spinor condensate magnetometry

Authors: S. K. Steinke, S. Singh, P. Meystre, K. C. Schwab, M. Vengalattore

Abstract: We provide a theoretical treatment of the quantum backaction of Larmor frequency measurements on a spinor Bose-Einstein condensate by an off-resonant light field. Two main results are presented; the first is a "quantum jump" operator description that reflects the abrupt change in the spin state of the atoms when a single photon is counted at a photodiode. The second is the derivation of a conditio… ▽ More We provide a theoretical treatment of the quantum backaction of Larmor frequency measurements on a spinor Bose-Einstein condensate by an off-resonant light field. Two main results are presented; the first is a "quantum jump" operator description that reflects the abrupt change in the spin state of the atoms when a single photon is counted at a photodiode. The second is the derivation of a conditional stochastic master equation relating the evolution of the condensate density matrix to the measurement record. We comment on applications of this formalism to metrology and many-body studies. △ Less

Submitted 12 November, 2012; originally announced November 2012.

Comments: 4 pages + references, 2 figures, submitted to PRL

Ultra-sensitive and Wide Bandwidth Thermal Measurements of Graphene at Low Temperatures

Authors: Kin Chung Fong, Keith Schwab

Abstract: Graphene is a material with remarkable electronic properties and exceptional thermal transport properties near room temperature, which have been well examined and understood. However at very low temperatures the thermodynamic and thermal transport properties are much less well explored and somewhat surprisingly, is expected to exhibit extreme thermal isolation. Here we demonstrate an ultra-sensiti… ▽ More Graphene is a material with remarkable electronic properties and exceptional thermal transport properties near room temperature, which have been well examined and understood. However at very low temperatures the thermodynamic and thermal transport properties are much less well explored and somewhat surprisingly, is expected to exhibit extreme thermal isolation. Here we demonstrate an ultra-sensitive, wide-bandwidth measurement scheme to probe the thermal transport and thermodynamic properties of the electron gas of graphene. We employ Johnson noise thermometry at microwave frequency to sensitively measure the temperature of the electron gas with resolution of $4 mK/\sqrt{Hz}$ and a bandwidth of 80 MHz. We have measured the electron-phonon coupling from 2-30 K at a charge density of $2\cdot 10^{11} cm^{-2}$. Utilizing bolometric mixing, we have sensed temperature oscillations with period of 430 ps and have determined the heat capacity of the electron gas to be $2\cdot 10^{-21} J/(K\cdot μm^2)$ at 5 K which is consistent with that of a two dimensional, Dirac electron gas. These measurements suggest that graphene-based devices together with wide bandwidth noise thermometry can generate substantial advances in the areas of ultra-sensitive bolometry, calorimetry, microwave and terahertz photo-detection, and bolometric mixing for applications in areas such as observational astronomy and quantum information and measurement. △ Less

Submitted 30 May, 2012; v1 submitted 26 February, 2012; originally announced February 2012.

Comments: 8 pages, 4 figures

Journal ref: Phys. Rev. X 2, 031006 (2012)

Macroscopic quantum resonators (MAQRO)

Authors: Rainer Kaltenbaek, Gerald Hechenblaikner, Nikolai Kiesel, Oriol Romero-Isart, Keith C. Schwab, Ulrich Johann, Markus Aspelmeyer

Abstract: Quantum physics challenges our understanding of the nature of physical reality and of space-time and suggests the necessity of radical revisions of their underlying concepts. Experimental tests of quantum phenomena involving massive macroscopic objects would provide novel insights into these fundamental questions. Making use of the unique environment provided by space, MAQRO aims at investigating… ▽ More Quantum physics challenges our understanding of the nature of physical reality and of space-time and suggests the necessity of radical revisions of their underlying concepts. Experimental tests of quantum phenomena involving massive macroscopic objects would provide novel insights into these fundamental questions. Making use of the unique environment provided by space, MAQRO aims at investigating this largely unexplored realm of macroscopic quantum physics. MAQRO has originally been proposed as a medium-sized fundamental-science space mission for the 2010 call of Cosmic Vision. MAQRO unites two experiments: DECIDE (DECoherence In Double-Slit Experiments) and CASE (Comparative Acceleration Sensing Experiment). The main scientific objective of MAQRO, which is addressed by the experiment DECIDE, is to test the predictions of quantum theory for quantum superpositions of macroscopic objects containing more than 10e8 atoms. Under these conditions, deviations due to various suggested alternative models to quantum theory would become visible. These models have been suggested to harmonize the paradoxical quantum phenomena both with the classical macroscopic world and with our notion of Minkowski space-time. The second scientific objective of MAQRO, which is addressed by the experiment CASE, is to demonstrate the performance of a novel type of inertial sensor based on optically trapped microspheres. CASE is a technology demonstrator that shows how the modular design of DECIDE allows to easily incorporate it with other missions that have compatible requirements in terms of spacecraft and orbit. CASE can, at the same time, serve as a test bench for the weak equivalence principle, i.e., the universality of free fall with test-masses differing in their mass by 7 orders of magnitude. △ Less

Submitted 19 March, 2012; v1 submitted 23 January, 2012; originally announced January 2012.

Comments: Proposal for a medium-sized space mission, 28 pages, 9 figures - in v2, we corrected some minor mistakes and replaced fig. 9 with a higher-resolution version; Experimental Astronomy, March 2012, Online, Open Access

Journal ref: Exp. Astron. 34 (2), 123-164 (2012)

Quantum measurement backaction from a BEC coupled to a mechanical oscillator

Authors: S. K. Steinke, S. Singh, M. E. Tasgin, P. Meystre, K. C. Schwab, M. Vengalattore

Abstract: We study theoretically the dynamics of a a hybrid optomechanical system consisting of a macroscopic mechanical membrane magnetically coupled to a spinor Bose-Einstein condensate via a nanomagnet attached at the membrane center. We demonstrate that this coupling permits us to monitor indirectly the center-of-mass position of the membrane via measurements of the spin of the condensed atoms. These me… ▽ More We study theoretically the dynamics of a a hybrid optomechanical system consisting of a macroscopic mechanical membrane magnetically coupled to a spinor Bose-Einstein condensate via a nanomagnet attached at the membrane center. We demonstrate that this coupling permits us to monitor indirectly the center-of-mass position of the membrane via measurements of the spin of the condensed atoms. These measurements normally induce a significant backaction on the membrane motion, which we quantify for the cases of thermal and coherent initial states of the membrane. We discuss the possibility of measuring that quantum backaction via repeated measurements. We also investigate the potential to generate non-classical states of the membrane, in particular Schrodinger cat states, via such repeated measurements. △ Less

Submitted 24 June, 2011; v1 submitted 10 May, 2011; originally announced May 2011.

Comments: 14 pages, 4 figures. Submitted to PRA

Preparation and Detection of a Mechanical Resonator Near the Ground State of Motion

Authors: T. Rocheleau, T. Ndukum, C. Macklin, J. B. Hertzberg, A. A. Clerk, K. C. Schwab

Abstract: We have cooled the motion of a radio-frequency nanomechanical resonator by parametric coupling to a driven microwave frequency superconducting resonator. Starting from a thermal occupation of 480 quanta, we have observed occupation factors as low as 3.8$\pm$1.2 and expect the mechanical resonator to be found with probability 0.21 in the quantum ground state of motion. Cooling is limited by rando… ▽ More We have cooled the motion of a radio-frequency nanomechanical resonator by parametric coupling to a driven microwave frequency superconducting resonator. Starting from a thermal occupation of 480 quanta, we have observed occupation factors as low as 3.8$\pm$1.2 and expect the mechanical resonator to be found with probability 0.21 in the quantum ground state of motion. Cooling is limited by random excitation of the microwave resonator and heating of the dissipative mechanical bath. △ Less

Submitted 19 July, 2009; originally announced July 2009.

Back-action Evading Measurements of Nanomechanical Motion

Authors: J. B. Hertzberg, T. Rocheleau, T. Ndukum, M. Savva, A. A. Clerk, K. C. Schwab

Abstract: When performing continuous measurements of position with sensitivity approaching quantum mechanical limits, one must confront the fundamental effects of detector back-action. Back-action forces are responsible for the ultimate limit on continuous position detection, can also be harnessed to cool the observed structure, and are expected to generate quantum entanglement. Back-action can also be ev… ▽ More When performing continuous measurements of position with sensitivity approaching quantum mechanical limits, one must confront the fundamental effects of detector back-action. Back-action forces are responsible for the ultimate limit on continuous position detection, can also be harnessed to cool the observed structure, and are expected to generate quantum entanglement. Back-action can also be evaded, allowing measurements with sensitivities that exceed the standard quantum limit, and potentially allowing for the generation of quantum squeezed states. We realize a device based on the parametric coupling between an ultra-low dissipation nanomechanical resonator and a microwave resonator. Here we demonstrate back-action evading (BAE) detection of a single quadrature of motion with sensitivity 4 times the quantum zero-point motion, back-action cooling of the mechanical resonator to n = 12 quanta, and a parametric mechanical pre-amplification effect which is harnessed to achieve position resolution a factor 1.3 times quantum zero-point motion. △ Less

Submitted 4 June, 2009; originally announced June 2009.

Comments: 19 pages (double-spaced) including 4 figures and references

Demonstration of an ultracold micro-optomechanical oscillator in a cryogenic cavity

Authors: Simon Groeblacher, Jared B. Hertzberg, Michael R. Vanner, Garrett D. Cole, Sylvain Gigan, K. C. Schwab, Markus Aspelmeyer

Abstract: Preparing and manipulating quantum states of mechanical resonators is a highly interdisciplinary undertaking that now receives enormous interest for its far-reaching potential in fundamental and applied science. Up to now, only nanoscale mechanical devices achieved operation close to the quantum regime. We report a new micro-optomechanical resonator that is laser cooled to a level of 30 thermal qu… ▽ More Preparing and manipulating quantum states of mechanical resonators is a highly interdisciplinary undertaking that now receives enormous interest for its far-reaching potential in fundamental and applied science. Up to now, only nanoscale mechanical devices achieved operation close to the quantum regime. We report a new micro-optomechanical resonator that is laser cooled to a level of 30 thermal quanta. This is equivalent to the best nanomechanical devices, however, with a mass more than four orders of magnitude larger (43 ng versus 1 pg) and at more than two orders of magnitude higher environment temperature (5 K versus 30 mK). Despite the large laser-added cooling factor of 4,000 and the cryogenic environment, our cooling performance is not limited by residual absorption effects. These results pave the way for the preparation of 100-um scale objects in the quantum regime. Possible applications range from quantum-limited optomechanical sensing devices to macroscopic tests of quantum physics. △ Less

Submitted 21 October, 2013; v1 submitted 13 January, 2009; originally announced January 2009.

Comments: Published version

Journal ref: Nature Phys. 5, 485-488 (2009)

Nanomechanical squeezing with detection via a microwave cavity

Authors: M. J. Woolley, A. C. Doherty, G. J. Milburn, K. C. Schwab

Abstract: We study a parametrically-driven nanomechanical resonator capacitively coupled to a microwave cavity. If the nanoresonator can be cooled to near its quantum ground state then quantum squeezing of a quadrature of the nanoresonator motion becomes feasible. We consider the adiabatic limit in which the cavity mode is slaved to the nanoresonator mode. By driving the cavity on its red-detuned sideband… ▽ More We study a parametrically-driven nanomechanical resonator capacitively coupled to a microwave cavity. If the nanoresonator can be cooled to near its quantum ground state then quantum squeezing of a quadrature of the nanoresonator motion becomes feasible. We consider the adiabatic limit in which the cavity mode is slaved to the nanoresonator mode. By driving the cavity on its red-detuned sideband, the squeezing can be coupled into the microwave field at the cavity resonance. The red-detuned sideband drive is also compatible with the goal of ground state cooling. Squeezing of the output microwave field may be inferred using a technique similar to that used to infer squeezing of the field produced by a Josephson parametric amplifier, and subsequently, squeezing of the nanoresonator motion may be inferred. We have calculated the output field microwave squeezing spectra and related this to squeezing of the nanoresonator motion, both at zero and finite temperature. Driving the cavity on the blue-detuned sideband, and on both the blue and red sidebands, have also been considered within the same formalism. △ Less

Submitted 28 September, 2008; v1 submitted 12 March, 2008; originally announced March 2008.

Comments: 12 pages, 4 figures, largely rewritten, particularly with regard to clarifying the relationship between microwave field and mechanical squeezing

Journal ref: Phys. Rev. A 78, 062303 (2008).

Cooling a nanomechanical resonator with quantum back-action

Authors: A. Naik, O. Buu, M. D. LaHaye, A. D. Armour, A. A. Clerk, M. P. Blencowe, K. C. Schwab

Abstract: Quantum mechanics demands that the act of measurement must affect the measured object. When a linear amplifier is used to continuously monitor the position of an object, the Heisenberg uncertainty relationship requires that the object be driven by force impulses, called back-action. Here we measure the back-action of a superconducting single-electron transistor (SSET) on a radiofrequency nanomec… ▽ More Quantum mechanics demands that the act of measurement must affect the measured object. When a linear amplifier is used to continuously monitor the position of an object, the Heisenberg uncertainty relationship requires that the object be driven by force impulses, called back-action. Here we measure the back-action of a superconducting single-electron transistor (SSET) on a radiofrequency nanomechanical resonator. The conductance of the SSET, which is capacitively coupled to the resonator, provides a sensitive probe of the latter's position;back-action effects manifest themselves as an effective thermal bath, the properties of which depend sensitively on SSET bias conditions. Surprisingly, when the SSET is biased near a transport resonance, we observe cooling of the nanomechanical mode from 550mK to 300mK-- an effect that is analogous to laser cooling in atomic physics. Our measurements have implications for nanomechanical readout of quantum information devices and the limits of ultrasensitive force microscopy (such as single-nuclear-spin magnetic resonance force microscopy). Furthermore, we anticipate the use of these backaction effects to prepare ultracold and quantum states of mechanical structures, which would not be accessible with existing technology. △ Less

Submitted 12 September, 2006; originally announced September 2006.

Comments: 28 pages, 7 figures; accepted for publication in Nature

Journal ref: Nature 443, 193 (2006)

Self-cooling of a micro-mirror by radiation pressure

Authors: S. Gigan, H. R. Boehm, M. Paternostro, F. Blaser, G. Langer, J. B. Hertzberg, K. Schwab, D. Baeuerle, M. Aspelmeyer, A. Zeilinger

Abstract: We demonstrate passive feedback cooling of a mechanical resonator based on radiation pressure forces and assisted by photothermal forces in a high-finesse optical cavity. The resonator is a free-standing high-reflectance micro-mirror (of mass m=400ng and mechanical quality factor Q=10^4) that is used as back-mirror in a detuned Fabry-Perot cavity of optical finesse F=500. We observe an increased… ▽ More We demonstrate passive feedback cooling of a mechanical resonator based on radiation pressure forces and assisted by photothermal forces in a high-finesse optical cavity. The resonator is a free-standing high-reflectance micro-mirror (of mass m=400ng and mechanical quality factor Q=10^4) that is used as back-mirror in a detuned Fabry-Perot cavity of optical finesse F=500. We observe an increased dam** in the dynamics of the mechanical oscillator by a factor of 30 and a corresponding cooling of the oscillator modes below 10 K starting from room temperature. This effect is an important ingredient for recently proposed schemes to prepare quantum entanglement of macroscopic mechanical oscillators. △ Less

Submitted 8 November, 2006; v1 submitted 11 July, 2006; originally announced July 2006.

Comments: 11 pages, 9 figures, minor corrections

Journal ref: Nature 444, 67 - 70 (02 Nov 2006)

A high-reflectivity high-Q micromechanical Bragg-mirror

Authors: H. R. Boehm, S. Gigan, G. Langer, J. Hertzberg, F. Blaser, D. Baeuerle, K. Schwab, A. Zeilinger, M. Aspelmeyer

Abstract: We report on the fabrication and characterization of a micromechanical oscillator consisting only of a free-standing dielectric Bragg mirror with high optical reflectivity and high mechanical quality. The fabrication technique is a hybrid approach involving laser ablation and dry etching. The mirror has a reflectivity of 99.6%, a mass of 400ng, and a mechanical quality factor Q of approximately… ▽ More We report on the fabrication and characterization of a micromechanical oscillator consisting only of a free-standing dielectric Bragg mirror with high optical reflectivity and high mechanical quality. The fabrication technique is a hybrid approach involving laser ablation and dry etching. The mirror has a reflectivity of 99.6%, a mass of 400ng, and a mechanical quality factor Q of approximately 10^4. Using this micromirror in a Fabry Perot cavity, a finesse of 500 has been achieved. This is an important step towards designing tunable high-Q high-finesse cavities on chip. △ Less

Submitted 2 January, 2007; v1 submitted 28 July, 2006; originally announced July 2006.

Comments: 3 pages, 2 figures

Journal ref: Appl. Phys. Lett. 89, 223101 (2006)

Ion Trap in a Semiconductor Chip

Authors: D. Stick, W. K. Hensinger, S. Olmschenk, M. J. Madsen, K. Schwab, C. Monroe

Abstract: The electromagnetic manipulation of isolated atoms has led to many advances in physics, from laser cooling and Bose-Einstein condensation of cold gases to the precise quantum control of individual atomic ion. Work on miniaturizing electromagnetic traps to the micrometer scale promises even higher levels of control and reliability. Compared with 'chip traps' for confining neutral atoms, ion traps… ▽ More The electromagnetic manipulation of isolated atoms has led to many advances in physics, from laser cooling and Bose-Einstein condensation of cold gases to the precise quantum control of individual atomic ion. Work on miniaturizing electromagnetic traps to the micrometer scale promises even higher levels of control and reliability. Compared with 'chip traps' for confining neutral atoms, ion traps with similar dimensions and power dissipation offer much higher confinement forces and allow unparalleled control at the single-atom level. Moreover, ion microtraps are of great interest in the development of miniature mass spectrometer arrays, compact atomic clocks, and most notably, large scale quantum information processors. Here we report the operation of a micrometer-scale ion trap, fabricated on a monolithic chip using semiconductor micro-electromechanical systems (MEMS) technology. We confine, laser cool, and measure heating of a single 111Cd+ ion in an integrated radiofrequency trap etched from a doped gallium arsenide (GaAs) heterostructure. △ Less

Submitted 9 January, 2006; originally announced January 2006.

Comments: 4 pages, 4 figures

Journal ref: Nature Phys. 2 (2006) 36-39

Nonlinear Quantum Dynamics

Authors: Salman Habib, Tanmoy Bhattacharya, Andrew Doherty, Benjamin Greenbaum, Asa Hopkins, Kurt Jacobs, Hideo Mabuchi, Keith Schwab, Kosuke Shizume, Daniel Steck, Bala Sundaram

Abstract: The vast majority of the literature dealing with quantum dynamics is concerned with linear evolution of the wave function or the density matrix. A complete dynamical description requires a full understanding of the evolution of measured quantum systems, necessary to explain actual experimental results. The dynamics of such systems is intrinsically nonlinear even at the level of distribution func… ▽ More The vast majority of the literature dealing with quantum dynamics is concerned with linear evolution of the wave function or the density matrix. A complete dynamical description requires a full understanding of the evolution of measured quantum systems, necessary to explain actual experimental results. The dynamics of such systems is intrinsically nonlinear even at the level of distribution functions, both classically as well as quantum mechanically. Aside from being physically more complete, this treatment reveals the existence of dynamical regimes, such as chaos, that have no counterpart in the linear case. Here, we present a short introductory review of some of these aspects, with a few illustrative results and examples. △ Less

Submitted 7 May, 2005; originally announced May 2005.

Comments: 13 pages, 3 figures, invited talk at the NATO Advanced Workshop, "Nonlinear Dynamics and Fundamental Interactions," (October, 2004, Tashkent)

Report number: LA-UR-05-0368

Comment on recent Physical Review Letter by Gaidarzhy, et al. "Evidence for quantized displacement in macroscopic nanomechanical oscillator."

Authors: K. C. Schwab, M. P. Blencowe, M. L. Roukes, A. N. Cleland, S. M. Girvin, G. J. Milburn, K. L. Ekinci

Abstract: In a recent letter, Gaidarzhy et al. claim to have observed evidence for quantized displacements of a nanomechanical oscillator. We contend that the evidence, analysis, claims, and conclusions presented are contrary to expectations from fundamentals of quantum mechanics and elasticity theory, and that the method used by the authors is unsuitable in principle to observe the quantized energy state… ▽ More In a recent letter, Gaidarzhy et al. claim to have observed evidence for quantized displacements of a nanomechanical oscillator. We contend that the evidence, analysis, claims, and conclusions presented are contrary to expectations from fundamentals of quantum mechanics and elasticity theory, and that the method used by the authors is unsuitable in principle to observe the quantized energy states of a nanomechanical structure. △ Less

Submitted 1 March, 2005; originally announced March 2005.

Ion trap transducers for quantum electromechanical oscillators

Authors: W. K. Hensinger, D. W. Utami, H. -S. Goan, K. Schwab, C. Monroe, G. J. Milburn

Abstract: An enduring challenge for contemporary physics is to experimentally observe and control quantum behavior in macroscopic systems. We show that a single trapped atomic ion could be used to probe the quantum nature of a mesoscopic mechanical oscillator precooled to 4K, and furthermore, to cool the oscillator with high efficiency to its quantum ground state. The proposed experiment could be performe… ▽ More An enduring challenge for contemporary physics is to experimentally observe and control quantum behavior in macroscopic systems. We show that a single trapped atomic ion could be used to probe the quantum nature of a mesoscopic mechanical oscillator precooled to 4K, and furthermore, to cool the oscillator with high efficiency to its quantum ground state. The proposed experiment could be performed using currently available technology. △ Less

Submitted 9 January, 2005; originally announced January 2005.

Comments: 4 pages, 2 figures

Journal ref: Phys. Rev. A 72, 041405(R) (2005)

Dynamics of a two-level system strongly coupled to a high-frequency quantum oscillator

Authors: E. K. Irish, J. Gea-Banacloche, I. Martin, K. C. Schwab

Abstract: Recent experiments on quantum behavior in microfabricated solid-state systems suggest tantalizing connections to quantum optics. Several of these experiments address the prototypical problem of cavity quantum electrodynamics: a two-level system coupled to a quantum harmonic oscillator. Such devices may allow the exploration of parameter regimes outside the near-resonance and weak-coupling assump… ▽ More Recent experiments on quantum behavior in microfabricated solid-state systems suggest tantalizing connections to quantum optics. Several of these experiments address the prototypical problem of cavity quantum electrodynamics: a two-level system coupled to a quantum harmonic oscillator. Such devices may allow the exploration of parameter regimes outside the near-resonance and weak-coupling assumptions of the ubiquitous rotating-wave approximation (RWA), necessitating other theoretical approaches. One such approach is an adiabatic approximation in the limit that the oscillator frequency is much larger than the characteristic frequency of the two-level system. A derivation of the approximation is presented and the time evolution of the two-level-system occupation probability is calculated using both thermal- and coherent-state initial conditions for the oscillator. Closed-form evaluation of the time evolution in the weak-coupling limit provides insight into the differences between the thermal- and coherent-state models. Finally, potential experimental observations in solid-state systems, particularly the Cooper-pair box--nanomechanical resonator system, are discussed and found to be promising. △ Less

Submitted 12 August, 2005; v1 submitted 15 December, 2004; originally announced December 2004.

Comments: 16 pages, 11 figures; revised abstract; some text revisions; added two figures and combined others; added references. Submitted to Phys. Rev. B

Journal ref: Phys. Rev. B 72, 195410 (2005)

Squeezing of a nanomechanical resonator by quantum nondemolition measurement and feedback

Authors: Rusko Ruskov, Keith Schwab, Alexander N. Korotkov

Abstract: We analyze squeezing of the nanoresonator state produced by periodic measurement of position by a quantum point contact or a single-electron transistor. The mechanism of squeezing is the stroboscopic quantum nondemolition measurement generalized to the case of continuous measurement by a weakly coupled detector. The magnitude of squeezing is calculated for the harmonic and stroboscopic modulatio… ▽ More We analyze squeezing of the nanoresonator state produced by periodic measurement of position by a quantum point contact or a single-electron transistor. The mechanism of squeezing is the stroboscopic quantum nondemolition measurement generalized to the case of continuous measurement by a weakly coupled detector. The magnitude of squeezing is calculated for the harmonic and stroboscopic modulations of measurement, taking into account detector efficiency and nanoresonator quality factor. We also analyze the operation of the quantum feedback, which prevents fluctuations of the wavepacket center due to measurement back-action. Verification of the squeezed state can be performed in almost the same way as its preparation; similar procedure can also be used for the force detection with sensitivity beyond the standard quantum limit. △ Less

Submitted 24 November, 2004; originally announced November 2004.

Comments: 20 pages, 10 eps figures

Journal ref: Phys. Rev. B 71, 235407 (2005)

Quantum Nondemolition Squeezing of a Nanomechanical Resonator

Authors: Rusko Ruskov, Keith Schwab, Alexander N. Korotkov

Abstract: We show that the nanoresonator position can be squeezed significantly below the ground state level by measuring the nanoresonator with a quantum point contact or a single-electron transistor and applying a periodic voltage across the detector. The mechanism of squeezing is basically a generalization of quantum nondemolition measurement of an oscillator to the case of continuous measurement by a… ▽ More We show that the nanoresonator position can be squeezed significantly below the ground state level by measuring the nanoresonator with a quantum point contact or a single-electron transistor and applying a periodic voltage across the detector. The mechanism of squeezing is basically a generalization of quantum nondemolition measurement of an oscillator to the case of continuous measurement by a weakly coupled detector. The quantum feedback is necessary to prevent the ``heating'' due to measurement back-action. We also discuss a procedure of experimental verification of the squeezed state. △ Less

Submitted 18 June, 2004; originally announced June 2004.

Comments: 9 pages, 3 figures

Journal ref: IEEE Trans. Nanotech. 4, 132 (2005)

Dissipation in Nanocrystalline-Diamond Nanomechanical Resonators

Authors: A. B. Hutchinson, P. A. Truitt, K. C. Schwab, L. Sekaric, J. M. Parpia, H. G. Craighead, J. E. Butler

Abstract: We have measured the dissipation and frequency of nanocrystalline-diamond nanomechanical resonators with resonant frequencies between 13.7 MHz and 157.3 MHz, over a temperature range of 1.4-274 K. Using both magnetomotive network analysis and a novel time-domain ring-down technique, we have found the dissipation in this material to have a temperature dependence roughly following T^0.2, with Q^-1… ▽ More We have measured the dissipation and frequency of nanocrystalline-diamond nanomechanical resonators with resonant frequencies between 13.7 MHz and 157.3 MHz, over a temperature range of 1.4-274 K. Using both magnetomotive network analysis and a novel time-domain ring-down technique, we have found the dissipation in this material to have a temperature dependence roughly following T^0.2, with Q^-1 = 10^-4 at low temperatures. The frequency dependence of a large dissipation feature at ~35-55 K is consistent with thermal activation over a 0.02 eV barrier with an attempt frequency of 10 GHz. △ Less

Submitted 24 November, 2003; originally announced November 2003.

Comments: 13 pages, 3 figures, to be published in Applied Physics Letters

Feedback cooling of a nanomechanical resonator

Authors: Asa Hopkins, Kurt Jacobs, Salman Habib, Keith Schwab

Abstract: Cooled, low-loss nanomechanical resonators offer the prospect of directly observing the quantum dynamics of mesoscopic systems. However, the present state of the art requires cooling down to the milliKelvin regime in order to observe quantum effects. Here we present an active feedback strategy based on continuous observation of the resonator position for the purpose of obtaining these low temper… ▽ More Cooled, low-loss nanomechanical resonators offer the prospect of directly observing the quantum dynamics of mesoscopic systems. However, the present state of the art requires cooling down to the milliKelvin regime in order to observe quantum effects. Here we present an active feedback strategy based on continuous observation of the resonator position for the purpose of obtaining these low temperatures. In addition, we apply this to an experimentally realizable configuration, where the position monitoring is carried out by a single-electron transistor. Our estimates indicate that with current technology this technique is likely to bring the required low temperatures within reach. △ Less

Submitted 25 February, 2003; originally announced February 2003.

Comments: 10 pages, RevTex4, 4 color eps figures

Journal ref: Phys. Rev. B 68, 235328 (2003)

Quantum Measurement of a Coupled Nanomechanical Resonator -- Cooper-Pair Box System

Authors: Elinor K. Irish, K. Schwab

Abstract: We show two effects as a result of considering the second-order correction to the spectrum of a nanomechanical resonator electrostatically coupled to a Cooper-pair box. The spectrum of the Cooper-pair box is modified in a way which depends on the Fock state of the resonator. Similarly, the frequency of the resonator becomes dependent on the state of the Cooper-pair box. We consider whether these… ▽ More We show two effects as a result of considering the second-order correction to the spectrum of a nanomechanical resonator electrostatically coupled to a Cooper-pair box. The spectrum of the Cooper-pair box is modified in a way which depends on the Fock state of the resonator. Similarly, the frequency of the resonator becomes dependent on the state of the Cooper-pair box. We consider whether these frequency shifts could be utilized to prepare the nanomechanical resonator in a Fock state, to perform a quantum non-demolition measurement of the resonator Fock state, and to distinguish the phase states of the Cooper-pair box. △ Less

Submitted 31 July, 2003; v1 submitted 14 January, 2003; originally announced January 2003.

Entanglement and decoherence of a micromechanical resonator via coupling to a Cooper box

Authors: A. D. Armour, M. P. Blencowe, K. C. Schwab

Abstract: We analyse the quantum dynamics of a micromechanical resonator capacitively coupled to a Cooper box. With appropriate quantum state control of the Cooper box, the resonator can be driven into a superposition of spatially separated states. The Cooper box can also be used to probe the environmentally-induced decoherence of the resonator superposition state. We analyse the quantum dynamics of a micromechanical resonator capacitively coupled to a Cooper box. With appropriate quantum state control of the Cooper box, the resonator can be driven into a superposition of spatially separated states. The Cooper box can also be used to probe the environmentally-induced decoherence of the resonator superposition state. △ Less

Submitted 20 December, 2001; originally announced December 2001.

Comments: 4 pages, 3 figures

Journal ref: Phys. Rev. Lett. 88, 148301 (2002)

Mechanical Lamb-shift analogue for the Cooper-pair box

Authors: A. D. Armour, M. P. Blencowe, K. C. Schwab

Abstract: We estimate the correction to the Cooper-pair box energy level splitting due to the quantum motion of a coupled micromechanical gate electrode. While the correction due to zero-point motion is very small, it should be possible to observe thermal motion-induced corrections to the photon-assisted tunneling current. We estimate the correction to the Cooper-pair box energy level splitting due to the quantum motion of a coupled micromechanical gate electrode. While the correction due to zero-point motion is very small, it should be possible to observe thermal motion-induced corrections to the photon-assisted tunneling current. △ Less

Submitted 11 September, 2001; originally announced September 2001.

Comments: To appear in Phonons 2001 Proceedings (Physica B)