Showing 1–50 of 216 results for author: Schulz, B

Equivariant free boundary minimal discs and annuli in ellipsoids

Authors: Mario B. Schulz

Abstract: We employ equivariant variational methods to construct new examples of nonplanar free boundary minimal discs in ellipsoids. We also prove that every ellipsoid contains at least three distinct embedded free boundary minimal annuli with dihedral symmetry. We employ equivariant variational methods to construct new examples of nonplanar free boundary minimal discs in ellipsoids. We also prove that every ellipsoid contains at least three distinct embedded free boundary minimal annuli with dihedral symmetry. △ Less

Submitted 19 June, 2024; originally announced June 2024.

Comments: 15 pages, 3 figures

Sequential model confidence sets

Authors: Sebastian Arnold, Georgios Gavrilopoulos, Benedikt Schulz, Johanna Ziegel

Abstract: In most prediction and estimation situations, scientists consider various statistical models for the same problem, and naturally want to select amongst the best. Hansen et al. (2011) provide a powerful solution to this problem by the so-called model confidence set, a subset of the original set of available models that contains the best models with a given level of confidence. Importantly, model co… ▽ More In most prediction and estimation situations, scientists consider various statistical models for the same problem, and naturally want to select amongst the best. Hansen et al. (2011) provide a powerful solution to this problem by the so-called model confidence set, a subset of the original set of available models that contains the best models with a given level of confidence. Importantly, model confidence sets respect the underlying selection uncertainty by being flexible in size. However, they presuppose a fixed sample size which stands in contrast to the fact that model selection and forecast evaluation are inherently sequential tasks where we successively collect new data and where the decision to continue or conclude a study may depend on the previous outcomes. In this article, we extend model confidence sets sequentially over time by relying on sequential testing methods. Recently, e-processes and confidence sequences have been introduced as new, safe methods for assessing statistical evidence. Sequential model confidence sets allow to continuously monitor the models' performances and come with time-uniform, nonasymptotic coverage guarantees. △ Less

Submitted 8 May, 2024; v1 submitted 29 April, 2024; originally announced April 2024.

Real-time Geoinformation Systems to Improve the Quality, Scalability, and Cost of Internet of Things for Agri-environment Research

Authors: Bryan C. Runck, Bobby Schulz, Jeff Bishop, Nathan Carlson, Bryan Chantigian, Gary Deters, Jesse Erdmann, Patrick M. Ewing, Michael Felzan, Xiao Fu, Jan Greyling, Christopher J. Hogan, Andrew Hollman, Ali Joglekar, Kris Junker, Michael Kantar, Lumbani Kaunda, Mohana Krishna, Benjamin Lynch, Peter Marchetto, Megan Marsolek, Troy McKay, Brad Morris, Ali Rashid Niaghi, Keerthi Pamulaparthy , et al. (19 additional authors not shown)

Abstract: With the increasing emphasis on machine learning and artificial intelligence to drive knowledge discovery in the agricultural sciences, spatial internet of things (IoT) technologies have become increasingly important for collecting real-time, high resolution data for these models. However, managing large fleets of devices while maintaining high data quality remains an ongoing challenge as scientis… ▽ More With the increasing emphasis on machine learning and artificial intelligence to drive knowledge discovery in the agricultural sciences, spatial internet of things (IoT) technologies have become increasingly important for collecting real-time, high resolution data for these models. However, managing large fleets of devices while maintaining high data quality remains an ongoing challenge as scientists iterate from prototype to mature end-to-end applications. Here, we provide a set of case studies using the framework of technology readiness levels for an open source spatial IoT system. The spatial IoT systems underwent 3 major and 14 minor system versions, had over 2,727 devices manufactured both in academic and commercial contexts, and are either in active or planned deployment across four continents. Our results show the evolution of a generalizable, open source spatial IoT system designed for agricultural scientists, and provide a model for academic researchers to overcome the challenges that exist in going from one-off prototypes to thousands of internet-connected devices. △ Less

Submitted 2 April, 2024; v1 submitted 28 March, 2024; originally announced March 2024.

Comments: 20 pages, 5 figures, 1 table

Comparison of Model Output Statistics and Neural Networks to Postprocess Wind Gusts

Authors: Cristina Primo, Benedikt Schulz, Sebastian Lerch, Reinhold Hess

Abstract: Wind gust prediction plays an important role in warning strategies of national meteorological services due to the high impact of its extreme values. However, forecasting wind gusts is challenging because they are influenced by small-scale processes and local characteristics. To account for the different sources of uncertainty, meteorological centers run ensembles of forecasts and derive probabilit… ▽ More Wind gust prediction plays an important role in warning strategies of national meteorological services due to the high impact of its extreme values. However, forecasting wind gusts is challenging because they are influenced by small-scale processes and local characteristics. To account for the different sources of uncertainty, meteorological centers run ensembles of forecasts and derive probabilities of wind gusts exceeding a threshold. These probabilities often exhibit systematic errors and require postprocessing. Model Output Statistics (MOS) is a common operational postprocessing technique, although more modern methods such as neural network-bases approaches have shown promising results in research studies. The transition from research to operations requires an exhaustive comparison of both techniques. Taking a first step into this direction, our study presents a comparison of a postprocessing technique based on linear and logistic regression approaches with different neural network methods proposed in the literature to improve wind gust predictions, specifically distributional regression networks and Bernstein quantile networks. We further contribute to investigating optimal design choices for neural network-based postprocessing methods regarding changes of the numerical model in the training period, the use of persistence predictors, and the temporal composition of training datasets. The performance of the different techniques is compared in terms of calibration, accuracy, reliability and resolution based on case studies of wind gust forecasts from the operational weather model of the German weather service and observations from 170 weather stations. △ Less

Submitted 23 January, 2024; v1 submitted 22 January, 2024; originally announced January 2024.

Multi-Institutional Audit of FLASH and Conventional Dosimetry with a 3D-Printed Anatomically Realistic Mouse Phantom

Authors: M Ramish Ashraf, Stavros Melemenidis, Kevin Liu, Veljko Grilj, Jeannette Jansen, Brett Velasquez, Luke Connell, Joseph B Schulz, Claude Bailat, Aaron Libed, Rakesh Manjappa, Suparna Dutt, Luis Soto, Brianna Lau, Aaron Garza, William Larsen, Lawrie Skinner, Amy S Yu, Murat Surucu, Edward E Graves, Peter G Maxim, Stephen F. Kry, Marie-Catherine Vozenin, Emil Schüler, Billy W Loo Jr

Abstract: We conducted a multi-institutional audit of dosimetric variability between FLASH and conventional dose rate (CONV) electron irradiations by using an anatomically realistic 3D-printed mouse phantom. A CT scan of a live mouse was used to create a 3D model of bony anatomy, lungs, and soft tissue. A dual-nozzle 3D printer was used to print the mouse phantom using acrylonitrile butadiene styrene (… ▽ More We conducted a multi-institutional audit of dosimetric variability between FLASH and conventional dose rate (CONV) electron irradiations by using an anatomically realistic 3D-printed mouse phantom. A CT scan of a live mouse was used to create a 3D model of bony anatomy, lungs, and soft tissue. A dual-nozzle 3D printer was used to print the mouse phantom using acrylonitrile butadiene styrene ($~1.02 g/cm^3$) and polylactic acid ($~1.24 g/cm^3$) simultaneously to simulate soft tissue and bone densities, respectively. The lungs were printed separately using lightweight polylactic acid ($~0.64 g/cm^3$). Hounsfield units (HU) and densities were compared with the reference CT scan of the live mouse. Print-to-print reproducibility of the phantom was assessed. Three institutions were each provided a phantom, and each institution performed two replicates of irradiations at selected mouse anatomic regions. The average dose difference between FLASH and CONV dose distributions and deviation from the prescribed dose were measured with radiochromic film. Compared to the reference CT scan, CT scans of the phantom demonstrated mass density differences of $0.10 g/cm^3$ for bone, $0.12 g/cm^3$ for lung, and $0.03 g/cm^3$ for soft tissue regions. Between phantoms, the difference in HU for soft tissue and bone was <10 HU from print to print. Lung exhibited the most variation (54 HU) but minimally affected dose distribution (<0.5% dose differences between phantoms). The mean difference between FLASH and CONV from the first replicate to the second decreased from 4.3% to 1.2%, and the mean difference from the prescribed dose decreased from 3.6% to 2.5% for CONV and 6.4% to 2.7% for FLASH. The framework presented here is promising for credentialing of multi-institutional studies of FLASH preclinical research to maximize the reproducibility of biological findings. △ Less

Submitted 28 September, 2023; originally announced September 2023.

Comments: 29 Pages, 5 Figures, 2 Tables

Postprocessing of Ensemble Weather Forecasts Using Permutation-invariant Neural Networks

Authors: Kevin Höhlein, Benedikt Schulz, Rüdiger Westermann, Sebastian Lerch

Abstract: Statistical postprocessing is used to translate ensembles of raw numerical weather forecasts into reliable probabilistic forecast distributions. In this study, we examine the use of permutation-invariant neural networks for this task. In contrast to previous approaches, which often operate on ensemble summary statistics and dismiss details of the ensemble distribution, we propose networks that tre… ▽ More Statistical postprocessing is used to translate ensembles of raw numerical weather forecasts into reliable probabilistic forecast distributions. In this study, we examine the use of permutation-invariant neural networks for this task. In contrast to previous approaches, which often operate on ensemble summary statistics and dismiss details of the ensemble distribution, we propose networks that treat forecast ensembles as a set of unordered member forecasts and learn link functions that are by design invariant to permutations of the member ordering. We evaluate the quality of the obtained forecast distributions in terms of calibration and sharpness and compare the models against classical and neural network-based benchmark methods. In case studies addressing the postprocessing of surface temperature and wind gust forecasts, we demonstrate state-of-the-art prediction quality. To deepen the understanding of the learned inference process, we further propose a permutation-based importance analysis for ensemble-valued predictors, which highlights specific aspects of the ensemble forecast that are considered important by the trained postprocessing models. Our results suggest that most of the relevant information is contained in a few ensemble-internal degrees of freedom, which may impact the design of future ensemble forecasting and postprocessing systems. △ Less

Submitted 18 January, 2024; v1 submitted 8 September, 2023; originally announced September 2023.

Comments: in press

Journal ref: Artificial Intelligence for the Earth Systems, 2023

Disc stackings and their Morse index

Authors: Alessandro Carlotto, Mario B. Schulz, David Wiygul

Abstract: We construct free boundary minimal disc stackings, with any number of strata, in the three-dimensional Euclidean unit ball, and prove uniform, linear lower and upper bounds on the Morse index of all such surfaces. Among other things, our work implies for any positive integer $k$ the existence of $k$-tuples of distinct, pairwise non-congruent, embedded free boundary minimal surfaces all having the… ▽ More We construct free boundary minimal disc stackings, with any number of strata, in the three-dimensional Euclidean unit ball, and prove uniform, linear lower and upper bounds on the Morse index of all such surfaces. Among other things, our work implies for any positive integer $k$ the existence of $k$-tuples of distinct, pairwise non-congruent, embedded free boundary minimal surfaces all having the same topological type. In addition, since we prove that the equivariant Morse index of any such free boundary minimal stacking, with respect to its maximal symmetry group, is bounded from below by (the integer part of) half the number of layers and from above strictly by twice the same number, it follows that any possible realization of such surfaces via an equivariant min-max method would need to employ sweepouts with an arbitrarily large number of parameters. This also shows that it is only for $N=2$ and $N=3$ layers that free boundary minimal disc stackings are achievable by means of one-dimensional mountain pass schemes. △ Less

Submitted 14 August, 2023; originally announced August 2023.

Comments: 55 pages, 8 figures

Topological control for min-max free boundary minimal surfaces

Authors: Giada Franz, Mario B. Schulz

Abstract: We establish general bounds on the topology of free boundary minimal surfaces obtained via min-max methods in compact, three-dimensional ambient manifolds with mean convex boundary. We prove that the first Betti number is lower semicontinuous along min-max sequences converging in the sense of varifolds to free boundary minimal surfaces. In the orientable case, we obtain an even stronger result whi… ▽ More We establish general bounds on the topology of free boundary minimal surfaces obtained via min-max methods in compact, three-dimensional ambient manifolds with mean convex boundary. We prove that the first Betti number is lower semicontinuous along min-max sequences converging in the sense of varifolds to free boundary minimal surfaces. In the orientable case, we obtain an even stronger result which implies that if the number of boundary components increases in the varifold limit, then the genus decreases at least as much. We also present several compelling applications, such as the variational construction of a free boundary minimal trinoid in the Euclidean unit ball. △ Less

Submitted 14 August, 2023; v1 submitted 3 July, 2023; originally announced July 2023.

Comments: 35 pages, 5 figures; minor expository changes in section 2

Current and Future Space and Airborne Observatories for ISM Studies

Authors: Bernhard Schulz, Margaret Meixner

Abstract: A tremendous amount of radiation is emitted by the Interstellar Medium in the mid- and far-infrared (3-500 μm) that represents the majority of the light emitted by a galaxy. In this article we motivate ISM studies in the infrared and the construction of large specialized observatories like the Stratospheric Observatory For Infrared Astronomy (SOFIA), which just concluded its mission on a scientifi… ▽ More A tremendous amount of radiation is emitted by the Interstellar Medium in the mid- and far-infrared (3-500 μm) that represents the majority of the light emitted by a galaxy. In this article we motivate ISM studies in the infrared and the construction of large specialized observatories like the Stratospheric Observatory For Infrared Astronomy (SOFIA), which just concluded its mission on a scientific high note, and the newly launched James Webb Space Telescope (JWST) that just begun its exciting scientific mission. We introduce their capabilities, present a few examples of their scientific discoveries and discuss how they complemented each other. We then consider the impact of the conclusion of SOFIA for the field in a historic context and look at new opportunities specifically for far-infrared observatories in space and in the stratosphere. △ Less

Submitted 13 January, 2023; originally announced January 2023.

Spectral estimates for free boundary minimal surfaces via Montiel-Ros partitioning methods

Authors: Alessandro Carlotto, Mario B. Schulz, David Wiygul

Abstract: We adapt and extend the Montiel-Ros methodology to compact manifolds with boundary, allowing for mixed (including oblique) boundary conditions and also accounting for the action of a finite group $G$ together with an additional twisting homomorphism $σ\colon G\to\operatorname O(1)$. We then apply this machinery in order to obtain quantitative lower and upper bounds on the growth rate of the Morse… ▽ More We adapt and extend the Montiel-Ros methodology to compact manifolds with boundary, allowing for mixed (including oblique) boundary conditions and also accounting for the action of a finite group $G$ together with an additional twisting homomorphism $σ\colon G\to\operatorname O(1)$. We then apply this machinery in order to obtain quantitative lower and upper bounds on the growth rate of the Morse index of free boundary minimal surfaces with respect to the topological data (i. e. the genus and the number of boundary components) of the surfaces in question. In particular, we compute the exact values of the equivariant Morse index and nullity for two infinite families of examples, with respect to their maximal symmetry groups, and thereby derive explicit two-sided linear bounds when the equivariance constraint is lifted. △ Less

Submitted 8 January, 2023; originally announced January 2023.

Comments: 55 pages, 6 figures

On topology changes in quantum field theory and quantum gravity

Authors: Benjamin Schulz

Abstract: Two singularity theorems can be proven if one attempts to let a Lorentzian cobordism interpolate between two topologically distinct manifolds. On the other hand, Cartier and DeWitt-Morette have given a rigorous definition for quantum field theories (qfts) by means of path integrals. This article uses their results to study whether qfts can be made compatible with topology changes. We show that pat… ▽ More Two singularity theorems can be proven if one attempts to let a Lorentzian cobordism interpolate between two topologically distinct manifolds. On the other hand, Cartier and DeWitt-Morette have given a rigorous definition for quantum field theories (qfts) by means of path integrals. This article uses their results to study whether qfts can be made compatible with topology changes. We show that path integrals over metrics need a finite norm for the latter and for degenerate metrics, this problem can sometimes be resolved with tetrads. We prove that already in the neighborhood of some cuspidal singularities, difficulties can arise to define certain qfts. On the other hand, we show that simple qfts can be defined around conical singularities that result from a topology change in a simple setup. We argue that the ground state of many theories of quantum gravity will imply a small cosmological constant and, during the expansion of the universe, will cause frequent topology changes. Unfortunately, it is difficult to describe the transition amplitudes consistently due to the aforementioned problems. We argue that one needs to describe qfts by stochastic differential equations, and in the case of gravity, by Regge calculus in order to resolve this problem. △ Less

Submitted 12 November, 2023; v1 submitted 13 November, 2022; originally announced November 2022.

Comments: 85 pages, to appear in rmp. The article is now in the production stage

Learning Image Representations for Content Based Image Retrieval of Radiotherapy Treatment Plans

Authors: Charles Huang, Varun Vasudevan, Oscar Pastor-Serrano, Md Tauhidul Islam, Yusuke Nomura, Piotr Dubrowski, Jen-Yeu Wang, Joseph B. Schulz, Yong Yang, Lei Xing

Abstract: Objective: Knowledge based planning (KBP) typically involves training an end-to-end deep learning model to predict dose distributions. However, training end-to-end methods may be associated with practical limitations due to the limited size of medical datasets that are often used. To address these limitations, we propose a content based image retrieval (CBIR) method for retrieving dose distributio… ▽ More Objective: Knowledge based planning (KBP) typically involves training an end-to-end deep learning model to predict dose distributions. However, training end-to-end methods may be associated with practical limitations due to the limited size of medical datasets that are often used. To address these limitations, we propose a content based image retrieval (CBIR) method for retrieving dose distributions of previously planned patients based on anatomical similarity. Approach: Our proposed CBIR method trains a representation model that produces latent space embeddings of a patient's anatomical information. The latent space embeddings of new patients are then compared against those of previous patients in a database for image retrieval of dose distributions. All source code for this project is available on github. Main Results: The retrieval performance of various CBIR methods is evaluated on a dataset consisting of both publicly available plans and clinical plans from our institution. This study compares various encoding methods, ranging from simple autoencoders to more recent Siamese networks like SimSiam, and the best performance was observed for the multitask Siamese network. Significance: Applying CBIR to inform subsequent treatment planning potentially addresses many limitations associated with end-to-end KBP. Our current results demonstrate that excellent image retrieval performance can be obtained through slight changes to previously developed Siamese networks. We hope to integrate CBIR into automated planning workflow in future works, potentially through methods like the MetaPlanner framework. △ Less

Submitted 23 August, 2022; v1 submitted 6 June, 2022; originally announced June 2022.

Infinitely many pairs of free boundary minimal surfaces with the same topology and symmetry group

Authors: Alessandro Carlotto, Mario B. Schulz, David Wiygul

Abstract: The topology and symmetry group of a free boundary minimal surface in the three-dimensional Euclidean unit ball do not determine the surface uniquely. We provide pairs of non-isometric free boundary minimal surfaces having any sufficiently large genus $g$, three boundary components and antiprismatic symmetry group of order $4(g+1)$. The topology and symmetry group of a free boundary minimal surface in the three-dimensional Euclidean unit ball do not determine the surface uniquely. We provide pairs of non-isometric free boundary minimal surfaces having any sufficiently large genus $g$, three boundary components and antiprismatic symmetry group of order $4(g+1)$. △ Less

Submitted 8 October, 2023; v1 submitted 10 May, 2022; originally announced May 2022.

Comments: final preprint version, to appear in Memoirs of the American Mathematical Society

Surfaces of section for geodesic flows of closed surfaces

Authors: Gonzalo Contreras, Gerhard Knieper, Marco Mazzucchelli, Benjamin H. Schulz

Abstract: We prove several results concerning the existence of surfaces of section for the geodesic flows of closed orientable Riemannian surfaces. The surfaces of section $Σ$ that we construct are either Birkhoff sections, meaning that they intersect every sufficiently long orbit segment of the geodesic flow, or at least they have some hyperbolic components in $\partialΣ$ as limit sets of the orbits of the… ▽ More We prove several results concerning the existence of surfaces of section for the geodesic flows of closed orientable Riemannian surfaces. The surfaces of section $Σ$ that we construct are either Birkhoff sections, meaning that they intersect every sufficiently long orbit segment of the geodesic flow, or at least they have some hyperbolic components in $\partialΣ$ as limit sets of the orbits of the geodesic flow that do not return to $Σ$. In order to prove these theorems, we provide a study of configurations of simple closed geodesics of closed orientable Riemannian surfaces, which may have independent interest. Our arguments are based on Grayson's curve shortening flow. △ Less

Submitted 25 April, 2022; originally announced April 2022.

Comments: 32 pages, 11 figures

MSC Class: 53C22; 37D40; 53D25

Aggregating distribution forecasts from deep ensembles

Authors: Benedikt Schulz, Sebastian Lerch

Abstract: The importance of accurately quantifying forecast uncertainty has motivated much recent research on probabilistic forecasting. In particular, a variety of deep learning approaches has been proposed, with forecast distributions obtained as output of neural networks. These neural network-based methods are often used in the form of an ensemble based on multiple model runs from different random initia… ▽ More The importance of accurately quantifying forecast uncertainty has motivated much recent research on probabilistic forecasting. In particular, a variety of deep learning approaches has been proposed, with forecast distributions obtained as output of neural networks. These neural network-based methods are often used in the form of an ensemble based on multiple model runs from different random initializations, resulting in a collection of forecast distributions that need to be aggregated into a final probabilistic prediction. With the aim of consolidating findings from the machine learning literature on ensemble methods and the statistical literature on forecast combination, we address the question of how to aggregate distribution forecasts based on such deep ensembles. Using theoretical arguments, simulation experiments and a case study on wind gust forecasting, we systematically compare probability- and quantile-based aggregation methods for three neural network-based approaches with different forecast distribution types as output. Our results show that combining forecast distributions can substantially improve the predictive performance. We propose a general quantile aggregation framework for deep ensembles that shows superior performance compared to a linear combination of the forecast densities. Finally, we investigate the effects of the ensemble size and derive recommendations of aggregating distribution forecasts from deep ensembles in practice. △ Less

Submitted 5 April, 2022; originally announced April 2022.

Geodesic Anosov flows, hyperbolic closed geodesics and stable ergodicity

Authors: Gerhard Knieper, Benjamin H. Schulz

Abstract: In this paper we show that the geodesic flow of a Finsler metric is Anosov if and only if there exists a $C^2$ open neighborhood of Finsler metrics all of whose closed geodesics are hyperbolic. For surfaces this result holds also for Riemannian metrics. This follows from a recent result of Contreras and Mazzucchelli. Furthermore, geodesic flows of Riemannian or Finsler metrics on surfaces are… ▽ More In this paper we show that the geodesic flow of a Finsler metric is Anosov if and only if there exists a $C^2$ open neighborhood of Finsler metrics all of whose closed geodesics are hyperbolic. For surfaces this result holds also for Riemannian metrics. This follows from a recent result of Contreras and Mazzucchelli. Furthermore, geodesic flows of Riemannian or Finsler metrics on surfaces are $C^2$ stably ergodic if and only if they are Anosov. △ Less

Submitted 10 February, 2022; originally announced February 2022.

Comments: 8 pages

MSC Class: 37J46 (Primary); 53C22 (Secondary)

A Fourier method for the determination of focus for telescopes with stars

Authors: C. Y. Tan, B. Schulz

Abstract: We introduce a Fourier method (Fm) for the determination of best focus for telescopes with stars. Our method fits a power function, that we will derive in this paper, to a set of images taken as a function of focuser position. The best focus position is where the power is maximum. Fm was first tested with small refractor and Schmidt-Cassegrain (SCT) telescopes. After the successful small telescope… ▽ More We introduce a Fourier method (Fm) for the determination of best focus for telescopes with stars. Our method fits a power function, that we will derive in this paper, to a set of images taken as a function of focuser position. The best focus position is where the power is maximum. Fm was first tested with small refractor and Schmidt-Cassegrain (SCT) telescopes. After the successful small telescope tests, we then tested Fm with a 2 m Ritchey-Chrétien-Coudé (RCC). Our tests show that Fm is immune to the problems inherent in the popular half-flux diameter method. △ Less

Submitted 28 January, 2022; originally announced January 2022.

Comments: This article has been accepted for publication in Monthly Notices of the Royal Astronomical Society (MNRAS) Published by Oxford University Press on behalf of the Royal Astronomical Society

Noncompact self-shrinkers for mean curvature flow with arbitrary genus

Authors: Reto Buzano, Huy The Nguyen, Mario B. Schulz

Abstract: In his lecture notes on mean curvature flow, Ilmanen conjectured the existence of noncompact self-shrinkers with arbitrary genus. Here, we employ min-max techniques to give a rigorous existence proof for these surfaces. Conjecturally, the self-shrinkers that we obtain have precisely one (asymptotically conical) end. We confirm this for large genus via a precise analysis of the limiting object of s… ▽ More In his lecture notes on mean curvature flow, Ilmanen conjectured the existence of noncompact self-shrinkers with arbitrary genus. Here, we employ min-max techniques to give a rigorous existence proof for these surfaces. Conjecturally, the self-shrinkers that we obtain have precisely one (asymptotically conical) end. We confirm this for large genus via a precise analysis of the limiting object of sequences of such self-shrinkers for which the genus tends to infinity. Finally, we provide numerical evidence for a further family of noncompact self-shrinkers with odd genus and two asymptotically conical ends. △ Less

Submitted 12 October, 2021; originally announced October 2021.

Minimal hypertori in the four-dimensional sphere

Authors: Alessandro Carlotto, Mario B. Schulz

Abstract: We prove that the four-dimensional round sphere contains a minimally embedded hypertorus, as well as infinitely many, pairwise non-isometric, immersed ones. Our analysis also yields infinitely many, pairwise non-isometric, minimally embedded hyperspheres and thus provides a self-contained solution to Chern's spherical Bernstein conjecture in dimensions four and six. We prove that the four-dimensional round sphere contains a minimally embedded hypertorus, as well as infinitely many, pairwise non-isometric, immersed ones. Our analysis also yields infinitely many, pairwise non-isometric, minimally embedded hyperspheres and thus provides a self-contained solution to Chern's spherical Bernstein conjecture in dimensions four and six. △ Less

Submitted 25 September, 2023; v1 submitted 24 September, 2021; originally announced September 2021.

Comments: Published version with the journal's style file. 33 pages, 7 figures

Journal ref: Ars Inveniendi Analytica (2023), Paper No. 8, 33 pp

Machine learning methods for postprocessing ensemble forecasts of wind gusts: A systematic comparison

Authors: Benedikt Schulz, Sebastian Lerch

Abstract: Postprocessing ensemble weather predictions to correct systematic errors has become a standard practice in research and operations. However, only few recent studies have focused on ensemble postprocessing of wind gust forecasts, despite its importance for severe weather warnings. Here, we provide a comprehensive review and systematic comparison of eight statistical and machine learning methods for… ▽ More Postprocessing ensemble weather predictions to correct systematic errors has become a standard practice in research and operations. However, only few recent studies have focused on ensemble postprocessing of wind gust forecasts, despite its importance for severe weather warnings. Here, we provide a comprehensive review and systematic comparison of eight statistical and machine learning methods for probabilistic wind gust forecasting via ensemble postprocessing, that can be divided in three groups: State of the art postprocessing techniques from statistics (ensemble model output statistics (EMOS), member-by-member postprocessing, isotonic distributional regression), established machine learning methods (gradient-boosting extended EMOS, quantile regression forests) and neural network-based approaches (distributional regression network, Bernstein quantile network, histogram estimation network). The methods are systematically compared using six years of data from a high-resolution, convection-permitting ensemble prediction system that was run operationally at the German weather service, and hourly observations at 175 surface weather stations in Germany. While all postprocessing methods yield calibrated forecasts and are able to correct the systematic errors of the raw ensemble predictions, incorporating information from additional meteorological predictor variables beyond wind gusts leads to significant improvements in forecast skill. In particular, we propose a flexible framework of locally adaptive neural networks with different probabilistic forecast types as output, which not only significantly outperform all benchmark postprocessing methods but also learn physically consistent relations associated with the diurnal cycle, especially the evening transition of the planetary boundary layer. △ Less

Submitted 17 June, 2021; originally announced June 2021.

First direct neutrino-mass measurement with sub-eV sensitivity

Authors: M. Aker, A. Beglarian, J. Behrens, A. Berlev, U. Besserer, B. Bieringer, F. Block, B. Bornschein, L. Bornschein, M. Böttcher, T. Brunst, T. S. Caldwell, R. M. D. Carney, L. La Cascio, S. Chilingaryan, W. Choi, K. Debowski, M. Deffert, M. Descher, D. Díaz Barrero, P. J. Doe, O. Dragoun, G. Drexlin, K. Eitel, E. Ellinger , et al. (103 additional authors not shown)

Abstract: We report the results of the second measurement campaign of the Karlsruhe Tritium Neutrino (KATRIN) experiment. KATRIN probes the effective electron anti-neutrino mass, $m_ν$, via a high-precision measurement of the tritium $β$-decay spectrum close to its endpoint at $18.6\,\mathrm{keV}$. In the second physics run presented here, the source activity was increased by a factor of 3.8 and the backgro… ▽ More We report the results of the second measurement campaign of the Karlsruhe Tritium Neutrino (KATRIN) experiment. KATRIN probes the effective electron anti-neutrino mass, $m_ν$, via a high-precision measurement of the tritium $β$-decay spectrum close to its endpoint at $18.6\,\mathrm{keV}$. In the second physics run presented here, the source activity was increased by a factor of 3.8 and the background was reduced by $25\,\%$ with respect to the first campaign. A sensitivity on $m_ν$ of $0.7\,\mathrm{eV/c^2}$ at $90\,\%$ confidence level (CL) was reached. This is the first sub-eV sensitivity from a direct neutrino-mass experiment. The best fit to the spectral data yields $m_ν^2 = (0.26\pm0.34)\,\mathrm{eV^4/c^4}$, resulting in an upper limit of $m_ν<0.9\,\mathrm{eV/c^2}$ ($90\,\%$ CL). By combining this result with the first neutrino mass campaign, we find an upper limit of $m_ν<0.8\,\mathrm{eV/c^2}$ ($90\,\%$ CL). △ Less

Submitted 18 May, 2021; originally announced May 2021.

Comments: 19 pages, 10 figures, 5 tables

Precision measurement of the electron energy-loss function in tritium and deuterium gas for the KATRIN experiment

Authors: M. Aker, A. Beglarian, J. Behrens, A. Berlev, U. Besserer, B. Bieringer, F. Block, B. Bornschein, L. Bornschein, M. Böttcher, T. Brunst, T. S. Caldwell, R. M. D. Carney, S. Chilingaryan, W. Choi, K. Debowski, M. Deffert, M. Descher, D. Díaz Barrero, P. J. Doe, O. Dragoun, G. Drexlin, F. Edzards, K. Eitel, E. Ellinger , et al. (110 additional authors not shown)

Abstract: The KATRIN experiment is designed for a direct and model-independent determination of the effective electron anti-neutrino mass via a high-precision measurement of the tritium $β$-decay endpoint region with a sensitivity on $m_ν$ of 0.2$\,$eV/c$^2$ (90% CL). For this purpose, the $β$-electrons from a high-luminosity windowless gaseous tritium source traversing an electrostatic retarding spectromet… ▽ More The KATRIN experiment is designed for a direct and model-independent determination of the effective electron anti-neutrino mass via a high-precision measurement of the tritium $β$-decay endpoint region with a sensitivity on $m_ν$ of 0.2$\,$eV/c$^2$ (90% CL). For this purpose, the $β$-electrons from a high-luminosity windowless gaseous tritium source traversing an electrostatic retarding spectrometer are counted to obtain an integral spectrum around the endpoint energy of 18.6$\,$keV. A dominant systematic effect of the response of the experimental setup is the energy loss of $β$-electrons from elastic and inelastic scattering off tritium molecules within the source. We determined the \linebreak energy-loss function in-situ with a pulsed angular-selective and monoenergetic photoelectron source at various tritium-source densities. The data was recorded in integral and differential modes; the latter was achieved by using a novel time-of-flight technique. We developed a semi-empirical parametrization for the energy-loss function for the scattering of 18.6-keV electrons from hydrogen isotopologs. This model was fit to measurement data with a 95% T$_2$ gas mixture at 30$\,$K, as used in the first KATRIN neutrino mass analyses, as well as a D$_2$ gas mixture of 96% purity used in KATRIN commissioning runs. The achieved precision on the energy-loss function has abated the corresponding uncertainty of $σ(m_ν^2)<10^{-2}\,\mathrm{eV}^2$ [arXiv:2101.05253] in the KATRIN neutrino-mass measurement to a subdominant level. △ Less

Submitted 14 May, 2021; originally announced May 2021.

Comments: 12 figures, 18 pages; to be submitted to EPJ C

The Concept of an Autonomic Avionics Platform and the Resulting Software Engineering Challenges

Authors: Bjoern Annighoefer, Johannes Reinhart, Matthias Brunner, Bernd Schulz

Abstract: The self-* properties commonly associated with the concept of autonomic computing are capabilities desirable for avionics software platforms. They decrease the configuration effort and inherently provide new fault tolerance and resource savings possibilities. The rigid certification process and the requirements for a static and predetermined system behavior are, however, in contradiction with the… ▽ More The self-* properties commonly associated with the concept of autonomic computing are capabilities desirable for avionics software platforms. They decrease the configuration effort and inherently provide new fault tolerance and resource savings possibilities. The rigid certification process and the requirements for a static and predetermined system behavior are, however, in contradiction with the adaptive and flexible nature of autonomic computing systems. We propose a partition-based architecture providing autonomic features for avionics software platforms while being compliant to regulations and accepted technologies, such as ARINC 653. The core is a platform consciousness based on a domain-specific model and a novel MAP-QE-K cycle. Moreover, we suggest a planning intelligence, a virtual qualification authority, and a minimized execution unit. For each component we define the required design assurance level and possible realization techniques. We discuss the overall feasibility and point out central challenges in the fields of runtime verification and models at runtime. These challenges need to be solved up to the realization of autonomic avionics, e.g. a virtual security assessment and a qualifiable domain-specific model database. △ Less

Submitted 20 March, 2021; originally announced March 2021.

Comments: 7 pages, 5 figures

MSC Class: 68N30 ACM Class: D.2.11; D.2.9

The Design, Construction, and Commissioning of the KATRIN Experiment

Authors: M. Aker, K. Altenmüller, J. F. Amsbaugh, M. Arenz, M. Babutzka, J. Bast, S. Bauer, H. Bechtler, M. Beck, A. Beglarian, J. Behrens, B. Bender, R. Berendes, A. Berlev, U. Besserer, C. Bettin, B. Bieringer, K. Blaum, F. Block, S. Bobien, J. Bohn, K. Bokeloh, H. Bolz, B. Bornschein, L. Bornschein , et al. (204 additional authors not shown)

Abstract: The KArlsruhe TRItium Neutrino (KATRIN) experiment, which aims to make a direct and model-independent determination of the absolute neutrino mass scale, is a complex experiment with many components. More than 15 years ago, we published a technical design report (TDR) [https://publikationen.bibliothek.kit.edu/270060419] to describe the hardware design and requirements to achieve our sensitivity goa… ▽ More The KArlsruhe TRItium Neutrino (KATRIN) experiment, which aims to make a direct and model-independent determination of the absolute neutrino mass scale, is a complex experiment with many components. More than 15 years ago, we published a technical design report (TDR) [https://publikationen.bibliothek.kit.edu/270060419] to describe the hardware design and requirements to achieve our sensitivity goal of 0.2 eV at 90% C.L. on the neutrino mass. Since then there has been considerable progress, culminating in the publication of first neutrino mass results with the entire beamline operating [arXiv:1909.06048]. In this paper, we document the current state of all completed beamline components (as of the first neutrino mass measurement campaign), demonstrate our ability to reliably and stably control them over long times, and present details on their respective commissioning campaigns. △ Less

Submitted 11 June, 2021; v1 submitted 5 March, 2021; originally announced March 2021.

Comments: Added missing acknowledgement, corrected performance statement in chapter 4.2.5, updated author list and references

Post-processing numerical weather prediction ensembles for probabilistic solar irradiance forecasting

Authors: Benedikt Schulz, Mehrez El Ayari, Sebastian Lerch, Sándor Baran

Abstract: In order to enable the transition towards renewable energy sources, probabilistic energy forecasting is of critical importance for incorporating volatile power sources such as solar energy into the electrical grid. Solar energy forecasting methods often aim to provide probabilistic predictions of solar irradiance. In particular, many hybrid approaches combine physical information from numerical we… ▽ More In order to enable the transition towards renewable energy sources, probabilistic energy forecasting is of critical importance for incorporating volatile power sources such as solar energy into the electrical grid. Solar energy forecasting methods often aim to provide probabilistic predictions of solar irradiance. In particular, many hybrid approaches combine physical information from numerical weather prediction models with statistical methods. Even though the physical models can provide useful information at intra-day and day-ahead forecast horizons, ensemble weather forecasts from multiple model runs are often not calibrated and show systematic biases. We propose a post-processing model for ensemble weather predictions of solar irradiance at temporal resolutions between 30 minutes and 6 hours. The proposed models provide probabilistic forecasts in the form of a censored logistic probability distribution for lead times up to 5 days and are evaluated in two case studies covering distinct physical models, geographical regions, temporal resolutions, and types of solar irradiance. We find that post-processing consistently and significantly improves the forecast performance of the ensemble predictions for lead times up to at least 48 hours and is well able to correct the systematic lack of calibration. △ Less

Submitted 2 March, 2021; v1 submitted 17 January, 2021; originally announced January 2021.

Comments: 32 pages, 16 figures, 1 table

Journal ref: Solar Energy 220 (2021), 1016-1031

Analysis methods for the first KATRIN neutrino-mass measurement

Authors: M. Aker, K. Altenmüller, A. Beglarian, J. Behrens, A. Berlev, U. Besserer, B. Bieringer, K. Blaum, F. Block, B. Bornschein, L. Bornschein, M. Böttcher, T. Brunst, T. S. Caldwell, L. La Cascio, S. Chilingaryan, W. Choi, D. Díaz Barrero, K. Debowski, M. Deffert, M. Descher, P. J. Doe, O. Dragoun, G. Drexlin, S. Dyba , et al. (104 additional authors not shown)

Abstract: We report on the data set, data handling, and detailed analysis techniques of the first neutrino-mass measurement by the Karlsruhe Tritium Neutrino (KATRIN) experiment, which probes the absolute neutrino-mass scale via the $β$-decay kinematics of molecular tritium. The source is highly pure, cryogenic T$_2$ gas. The $β$ electrons are guided along magnetic field lines toward a high-resolution, inte… ▽ More We report on the data set, data handling, and detailed analysis techniques of the first neutrino-mass measurement by the Karlsruhe Tritium Neutrino (KATRIN) experiment, which probes the absolute neutrino-mass scale via the $β$-decay kinematics of molecular tritium. The source is highly pure, cryogenic T$_2$ gas. The $β$ electrons are guided along magnetic field lines toward a high-resolution, integrating spectrometer for energy analysis. A silicon detector counts $β$ electrons above the energy threshold of the spectrometer, so that a scan of the thresholds produces a precise measurement of the high-energy spectral tail. After detailed theoretical studies, simulations, and commissioning measurements, extending from the molecular final-state distribution to inelastic scattering in the source to subtleties of the electromagnetic fields, our independent, blind analyses allow us to set an upper limit of 1.1 eV on the neutrino-mass scale at a 90\% confidence level. This first result, based on a few weeks of running at a reduced source intensity and dominated by statistical uncertainty, improves on prior limits by nearly a factor of two. This result establishes an analysis framework for future KATRIN measurements, and provides important input to both particle theory and cosmology. △ Less

Submitted 12 May, 2021; v1 submitted 13 January, 2021; originally announced January 2021.

Comments: 36 pages with 26 figures. Accepted to Phys. Rev. D

Journal ref: Phys. Rev. D 104, 012005 (2021)

Bound on 3+1 active-sterile neutrino mixing from the first four-week science run of KATRIN

Authors: M. Aker, K. Altenmueller, A. Beglarian, J. Behrens, A. Berlev, U. Besserer, B. Bieringer, K. Blaum, F. Block, B. Bornschein, L. Bornschein, M. Boettcher, T. Brunst, T. S. Caldwell, L. La Cascio, S. Chilingaryan, W. Choi, D. Diaz Barrero, K. Debowski, M. Deffert, M. Descher, P. J. Doe, O. Dragoun, G. Drexlin, S. Dyba , et al. (104 additional authors not shown)

Abstract: We report on the light sterile neutrino search from the first four-week science run of the KATRIN experiment in~2019. Beta-decay electrons from a high-purity gaseous molecular tritium source are analyzed by a high-resolution MAC-E filter down to 40 eV below the endpoint at 18.57 keV. We consider the framework with three active neutrinos and one sterile neutrino of mass $m_{4}$. The analysis is sen… ▽ More We report on the light sterile neutrino search from the first four-week science run of the KATRIN experiment in~2019. Beta-decay electrons from a high-purity gaseous molecular tritium source are analyzed by a high-resolution MAC-E filter down to 40 eV below the endpoint at 18.57 keV. We consider the framework with three active neutrinos and one sterile neutrino of mass $m_{4}$. The analysis is sensitive to a fourth mass state $m^2_{4} \lesssim$ 1000 eV$^2$ and to active-to-sterile neutrino mixing down to $|U_{e4}|^2 \gtrsim 2\cdot10^{-2}$. No significant spectral distortion is observed and exclusion bounds on the sterile mass and mixing are reported. These new limits supersede the Mainz results and improve the Troitsk bound for $m^2_{4} <$ 30 eV$^2$. The reactor and gallium anomalies are constrained for $ 100 < Δ{m}^2_{41} < 1000$ eV$^2$. △ Less

Submitted 10 November, 2020; originally announced November 2020.

Comments: 8 pages, 4 figures

Journal ref: Phys. Rev. Lett. 126, 091803 (2021)

Free boundary minimal surfaces with connected boundary and arbitrary genus

Authors: Alessandro Carlotto, Giada Franz, Mario B. Schulz

Abstract: We employ min-max techniques to show that the unit ball in $\mathbb{R}^3$ contains embedded free boundary minimal surfaces with connected boundary and arbitrary genus. We employ min-max techniques to show that the unit ball in $\mathbb{R}^3$ contains embedded free boundary minimal surfaces with connected boundary and arbitrary genus. △ Less

Submitted 14 January, 2020; originally announced January 2020.

Journal ref: Cambridge Journal of Mathematics, Vol. 10, No. 4 (2022), pp. 835-857

Suppression of Penning discharges between the KATRIN spectrometers

Authors: M. Aker, K. Altenmüller, A. Beglarian, J. Behrens, A. Berlev, U. Besserer, K. Blaum, F. Block, S. Bobien, B. Bornschein, L. Bornschein, H. Bouquet, T. Brunst, T. S. Caldwell, S. Chilingaryan, W. Choi, K. Debowski, M. Deffert, M. Descher, D. Díaz Barrero, P. J. Doe, O. Dragoun, G. Drexlin, S. Dyba, K. Eitel , et al. (129 additional authors not shown)

Abstract: The KArlsruhe TRItium Neutrino experiment (KATRIN) aims to determine the effective electron (anti)neutrino mass with a sensitivity of $0.2\textrm{ eV/c}^2$ (90$\%$ C.L.) by precisely measuring the endpoint region of the tritium $β$-decay spectrum. It uses a tandem of electrostatic spectrometers working as MAC-E (magnetic adiabatic collimation combined with an electrostatic) filters. In the space b… ▽ More The KArlsruhe TRItium Neutrino experiment (KATRIN) aims to determine the effective electron (anti)neutrino mass with a sensitivity of $0.2\textrm{ eV/c}^2$ (90$\%$ C.L.) by precisely measuring the endpoint region of the tritium $β$-decay spectrum. It uses a tandem of electrostatic spectrometers working as MAC-E (magnetic adiabatic collimation combined with an electrostatic) filters. In the space between the pre-spectrometer and the main spectrometer, an unavoidable Penning trap is created when the superconducting magnet between the two spectrometers, biased at their respective nominal potentials, is energized. The electrons accumulated in this trap can lead to discharges, which create additional background electrons and endanger the spectrometer and detector section downstream. To counteract this problem, "electron catchers" were installed in the beamline inside the magnet bore between the two spectrometers. These catchers can be moved across the magnetic-flux tube and intercept on a sub-ms time scale the stored electrons along their magnetron motion paths. In this paper, we report on the design and the successful commissioning of the electron catchers and present results on their efficiency in reducing the experimental background. △ Less

Submitted 17 September, 2020; v1 submitted 21 November, 2019; originally announced November 2019.

Comments: - 12 pages, 14 figures, LaTeX; typos corrected, references added; precised a few arguments, added additional discussions, results unchanged

Journal ref: Eur. Phys. J. C (2020) 80: 821

First operation of the KATRIN experiment with tritium

Authors: M. Aker, K. Altenmüller, M. Arenz, W. -J. Baek, J. Barrett, A. Beglarian, J. Behrens, A. Berlev, U. Besserer, K. Blaum, F. Block, S. Bobien, B. Bornschein, L. Bornschein, H. Bouquet, T. Brunst, T. S. Caldwell, S. Chilingaryan, W. Choi, K. Debowski, M. Deffert, M. Descher, D. Díaz Barrero, P. J. Doe, O. Dragoun , et al. (146 additional authors not shown)

Abstract: The determination of the neutrino mass is one of the major challenges in astroparticle physics today. Direct neutrino mass experiments, based solely on the kinematics of beta-decay, provide a largely model-independent probe to the neutrino mass scale. The Karlsruhe Tritium Neutrino (KATRIN) experiment is designed to directly measure the effective electron antineutrino mass with a sensitivity of 0.… ▽ More The determination of the neutrino mass is one of the major challenges in astroparticle physics today. Direct neutrino mass experiments, based solely on the kinematics of beta-decay, provide a largely model-independent probe to the neutrino mass scale. The Karlsruhe Tritium Neutrino (KATRIN) experiment is designed to directly measure the effective electron antineutrino mass with a sensitivity of 0.2 eV 90% CL. In this work we report on the first operation of KATRIN with tritium which took place in 2018. During this commissioning phase of the tritium circulation system, excellent agreement of the theoretical prediction with the recorded spectra was found and stable conditions over a time period of 13 days could be established. These results are an essential prerequisite for the subsequent neutrino mass measurements with KATRIN in 2019. △ Less

Submitted 13 September, 2019; originally announced September 2019.

An improved upper limit on the neutrino mass from a direct kinematic method by KATRIN

Authors: M. Aker, K. Altenmüller, M. Arenz, M. Babutzka, J. Barrett, S. Bauer, M. Beck, A. Beglarian, J. Behrens, T. Bergmann, U. Besserer, K. Blaum, F. Block, S. Bobien, K. Bokeloh, J. Bonn, B. Bornschein, L. Bornschein, H. Bouquet, T. Brunst, T. S. Caldwell, L. La Cascio, S. Chilingaryan, W. Choi, T. J. Corona , et al. (184 additional authors not shown)

Abstract: We report on the neutrino mass measurement result from the first four-week science run of the Karlsruhe Tritium Neutrino experiment KATRIN in spring 2019. Beta-decay electrons from a high-purity gaseous molecular tritium source are energy analyzed by a high-resolution MAC-E filter. A fit of the integrated electron spectrum over a narrow interval around the kinematic endpoint at 18.57 keV gives an… ▽ More We report on the neutrino mass measurement result from the first four-week science run of the Karlsruhe Tritium Neutrino experiment KATRIN in spring 2019. Beta-decay electrons from a high-purity gaseous molecular tritium source are energy analyzed by a high-resolution MAC-E filter. A fit of the integrated electron spectrum over a narrow interval around the kinematic endpoint at 18.57 keV gives an effective neutrino mass square value of $(-1.0^{+0.9}_{-1.1})$ eV$^2$. From this we derive an upper limit of 1.1 eV (90$\%$ confidence level) on the absolute mass scale of neutrinos. This value coincides with the KATRIN sensitivity. It improves upon previous mass limits from kinematic measurements by almost a factor of two and provides model-independent input to cosmological studies of structure formation. △ Less

Submitted 13 September, 2019; originally announced September 2019.

Journal ref: Phys. Rev. Lett. 123, 221802 (2019)

Incomplete Yamabe flows and removable singularities

Authors: Mario B. Schulz

Abstract: We study the Yamabe flow on a Riemannian manifold of dimension $m\geq3$ minus a closed submanifold of dimension $n$ and prove that there exists an instantaneously complete solution if and only if $n>\frac{m-2}{2}$. In the remaining cases $0\leq n\leq\frac{m-2}{2}$ including the borderline case, we show that the removability of the $n$-dimensional singularity is necessarily preserved along the Yama… ▽ More We study the Yamabe flow on a Riemannian manifold of dimension $m\geq3$ minus a closed submanifold of dimension $n$ and prove that there exists an instantaneously complete solution if and only if $n>\frac{m-2}{2}$. In the remaining cases $0\leq n\leq\frac{m-2}{2}$ including the borderline case, we show that the removability of the $n$-dimensional singularity is necessarily preserved along the Yamabe flow. In particular, the flow must remain geodesically incomplete as long as it exists. This is contrasted with the two-dimensional case, where instantaneously complete solutions always exist. △ Less

Submitted 5 August, 2019; v1 submitted 3 July, 2019; originally announced July 2019.

Unconditional existence of conformally hyperbolic Yamabe flows

Authors: Mario B. Schulz

Abstract: We prove global existence of instantaneously complete Yamabe flows on hyperbolic space of arbitrary dimension $m\geq3$ starting from any smooth, conformally hyperbolic initial metric. We do not require initial completeness or curvature bounds. With the same methods, we show rigidity of hyperbolic space under the Yamabe flow. We prove global existence of instantaneously complete Yamabe flows on hyperbolic space of arbitrary dimension $m\geq3$ starting from any smooth, conformally hyperbolic initial metric. We do not require initial completeness or curvature bounds. With the same methods, we show rigidity of hyperbolic space under the Yamabe flow. △ Less

Submitted 3 July, 2019; v1 submitted 21 November, 2018; originally announced November 2018.

Journal ref: Analysis & PDE 13 (2020) 1579-1590

On the physical implications of Hawking's spacetime foam

Authors: Benjamin Schulz

Abstract: Hawking's spacetime foam model predicts that due to quantum fluctuations, spacetime is filled with black hole like objects. We argue that Hawking's model implies a cosmological constant of the observed order and that it can also be used to solve the problem of time in quantum gravity. Hawking's spacetime foam model predicts that due to quantum fluctuations, spacetime is filled with black hole like objects. We argue that Hawking's model implies a cosmological constant of the observed order and that it can also be used to solve the problem of time in quantum gravity. △ Less

Submitted 22 October, 2018; originally announced October 2018.

Comments: 12 pages

Journal ref: B. Schulz, Fortschr. Phys. 2018, 1800070

Yamabe flow on non-compact manifolds with unbounded initial curvature

Authors: Mario B. Schulz

Abstract: We prove global existence of Yamabe flows on non-compact manifolds $M$ of dimension $m\geq3$ under the assumption that the initial metric $g_0=u_0g_M$ is conformally equivalent to a complete background metric $g_M$ of bounded, non-positive scalar curvature and positive Yamabe invariant with conformal factor $u_0$ bounded from above and below. We do not require initial curvature bounds. In particul… ▽ More We prove global existence of Yamabe flows on non-compact manifolds $M$ of dimension $m\geq3$ under the assumption that the initial metric $g_0=u_0g_M$ is conformally equivalent to a complete background metric $g_M$ of bounded, non-positive scalar curvature and positive Yamabe invariant with conformal factor $u_0$ bounded from above and below. We do not require initial curvature bounds. In particular, the scalar curvature of $(M,g_0)$ can be unbounded from above and below without growth condition. △ Less

Submitted 19 November, 2018; v1 submitted 15 June, 2018; originally announced June 2018.

Correcting the extended-source calibration for the Herschel-SPIRE Fourier-Transform Spectrometer

Authors: Ivan Valtchanov, R. Hopwood, G. Bendo, C. Benson, L. Conversi, T. Fulton, M. J. Griffin, T. Joubaud, T. Lim, N. Lu, N. Marchili, G. Makiwa, R. A. Meyer, D. A. Naylor, C. North, A. Papageorgiou, C. Pearson, E. T. Polehampton, J. Scott, B. Schulz, L. D. Spencer, M. H. D. van der Wiel, R. Wu

Abstract: We describe an update to the Herschel-SPIRE Fourier-Transform Spectrometer (FTS) calibration for extended sources, which incorporates a correction for the frequency-dependent far-field feedhorn efficiency, $η_\mathrm{FF}$. This significant correction affects all FTS extended-source calibrated spectra in sparse or map** mode, regardless of the spectral resolution. Line fluxes and continuum levels… ▽ More We describe an update to the Herschel-SPIRE Fourier-Transform Spectrometer (FTS) calibration for extended sources, which incorporates a correction for the frequency-dependent far-field feedhorn efficiency, $η_\mathrm{FF}$. This significant correction affects all FTS extended-source calibrated spectra in sparse or map** mode, regardless of the spectral resolution. Line fluxes and continuum levels are underestimated by factors of 1.3-2 in the Spectrometer Long-Wavelength band (SLW, 447-1018 GHz; 671-294 $μ$m) and 1.4-1.5 in the Spectrometer Short-Wavelength band (SSW, 944-1568 GHz; 318-191 $μ$m). The correction was implemented in the FTS pipeline version 14.1 and has also been described in the SPIRE Handbook since Feb 2017. Studies based on extended-source calibrated spectra produced prior to this pipeline version should be critically reconsidered using the current products available in the Herschel Science Archive. Once the extended-source calibrated spectra are corrected for $η_\mathrm{FF}$, the synthetic photometry and the broadband intensities from SPIRE photometer maps agree within 2-4% -- similar levels to the comparison of point-source calibrated spectra and photometry from point-source calibrated maps. The two calibration schemes for the FTS are now self-consistent: the conversion between the corrected extended-source and point-source calibrated spectra can be achieved with the beam solid angle and a gain correction that accounts for the diffraction loss. △ Less

Submitted 2 January, 2018; v1 submitted 30 August, 2017; originally announced August 2017.

Comments: 9 pages, 6 figures, 1 table, MNRAS in press

SPIRE Point Source Catalog Explanatory Supplement

Authors: Bernhard Schulz, Gábor Marton, Ivan Valtchanov, Ana María Pérez García, Sándor Pintér, Phil Appleton, Csaba Kiss, Tanya Lim, Nanyao Lu, Andreas Papageorgiou, Chris Pearson, John Rector, Miguel Sánchez Portal, David Shupe, Viktor L. Tóth, Schuyler Van Dyk, Erika Varga-Verebélyi, Kevin Xu

Abstract: The Spectral and Photometric Imaging Receiver (SPIRE) was launched as one of the scientific instruments on board of the space observatory Herschel. The SPIRE photometer opened up an entirely new window in the Submillimeter domain for large scale map**, that up to then was very difficult to observe. There are already several catalogs that were produced by individual Herschel science projects. Yet… ▽ More The Spectral and Photometric Imaging Receiver (SPIRE) was launched as one of the scientific instruments on board of the space observatory Herschel. The SPIRE photometer opened up an entirely new window in the Submillimeter domain for large scale map**, that up to then was very difficult to observe. There are already several catalogs that were produced by individual Herschel science projects. Yet, we estimate that the objects of only a fraction of these maps will ever be systematically extracted and published by the science teams that originally proposed the observations. The SPIRE instrument performed its standard photometric observations in an optically very stable configuration, only moving the telescope across the sky, with variations in its configuration parameters limited to scan speed and sampling rate. This and the scarcity of features in the data that require special processing steps made this dataset very attractive for producing an expert reduced catalog of point sources that is being described in this document. The Catalog was extracted from a total of 6878 unmodified SPIRE scan map observations. The photometry was obtained by a systematic and homogeneous source extraction procedure, followed by a rigorous quality check that emphasized reliability over completeness. Having to exclude regions affected by strong Galactic emission, that pushed the limits of the four source extraction methods that were used, this catalog is aimed primarily at the extragalactic community. The result can serve as a pathfinder for ALMA and other Submillimeter and Far-Infrared facilities. 1,693,718 sources are included in the final catalog, splitting into 950688, 524734, 218296 objects for the 250μm, 350μm, and 500μm bands, respectively. The catalog comes with well characterized environments, reliability, completeness, and accuracies, that single programs typically cannot provide. △ Less

Submitted 1 June, 2017; originally announced June 2017.

A Herschel Space Observatory Spectral Line Survey of Local Luminous Infrared Galaxies from 194 to 671 Microns

Authors: Nanyao Lu, Yinghe Zhao, Tanio Díaz-Santos, C. Kevin Xu, Yu Gao, Lee Armus, Kate G. Isaak, Joseph M. Mazzarella, Paul P. van der Werf, Philip N. Appleton, Vassilis Charmandaris, Aaron S. Evans, Justin Howell, Kazushi Iwasawa, Jamie Leech, Steven Lord, Andreea O. Petric, George C. Privon, David B. Sanders, Bernhard Schulz, Jason A. Surace

Abstract: We describe a Herschel Space Observatory 194-671 micron spectroscopic survey of a sample of 121 local luminous infrared galaxies and report the fluxes of the CO $J$ to $J$-1 rotational transitions for $4 \leqslant J \leqslant 13$, the [NII] 205 um line, the [CI] lines at 609 and 370 um, as well as additional and usually fainter lines. The CO spectral line energy distributions (SLEDs) presented her… ▽ More We describe a Herschel Space Observatory 194-671 micron spectroscopic survey of a sample of 121 local luminous infrared galaxies and report the fluxes of the CO $J$ to $J$-1 rotational transitions for $4 \leqslant J \leqslant 13$, the [NII] 205 um line, the [CI] lines at 609 and 370 um, as well as additional and usually fainter lines. The CO spectral line energy distributions (SLEDs) presented here are consistent with our earlier work, which was based on a smaller sample, that calls for two distinct molecular gas components in general: (i) a cold component, which emits CO lines primarily at $J \lesssim 4$ and likely represents the same gas phase traced by CO (1-0), and (ii) a warm component, which dominates over the mid-$J$ regime ($4 < J < 10$) and is intimately related to current star formation. We present evidence that the CO line emission associated with an active galactic nucleus is significant only at $J > 10$. The flux ratios of the two [CI] lines imply modest excitation temperatures of 15 to 30 K; the [CI] 370 um line scales more linearly in flux with CO (4-3) than with CO (7-6). These findings suggest that the [CI] emission is predominately associated with the gas component defined in (i) above. Our analysis of the stacked spectra in different far-infrared (FIR) color bins reveals an evolution of the SLED of the rotational transitions of water vapor as a function of the FIR color in a direction consistent with infrared photon pum**. △ Less

Submitted 28 February, 2017; originally announced March 2017.

Comments: 244 pages, 23 figures, 7 tables, accepted for publication in the Astrophysical Journal Supplement Series

The Great Observatories All-Sky LIRG Survey: Herschel Image Atlas and Aperture Photometry

Authors: Jason K. Chu, D. B. Sanders, K. L. Larson, J. M. Mazzarella, J. H. Howell, T. Díaz-Santos, K. C. Xu, R. Paladini, B. Schulz, D. Shupe, P. Appleton, L. Armus, N. Billot, B. H. P. Chan, A. S. Evans, D. Fadda, D. T. Frayer, S. Haan, C. M. Ishida, K. Iwasawa, D. -C. Kim, S. Lord, E. Murphy, A. Petric, G. C. Privon , et al. (2 additional authors not shown)

Abstract: Far-infrared (FIR) images and photometry are presented for 201 Luminous and Ultraluminous Infrared Galaxies [LIRGs: log$(L_{\rm IR}/L_\odot) = 11.00 - 11.99$, ULIRGs: log$(L_{\rm IR}/L_\odot) = 12.00 - 12.99$], in the Great Observatories All-Sky LIRG Survey (GOALS) based on observations with the $Herschel$ $Space$ $Observatory$ Photodetector Array Camera and Spectrometer (PACS) and the Spectral an… ▽ More Far-infrared (FIR) images and photometry are presented for 201 Luminous and Ultraluminous Infrared Galaxies [LIRGs: log$(L_{\rm IR}/L_\odot) = 11.00 - 11.99$, ULIRGs: log$(L_{\rm IR}/L_\odot) = 12.00 - 12.99$], in the Great Observatories All-Sky LIRG Survey (GOALS) based on observations with the $Herschel$ $Space$ $Observatory$ Photodetector Array Camera and Spectrometer (PACS) and the Spectral and Photometric Imaging Receiver (SPIRE) instruments. The image atlas displays each GOALS target in the three PACS bands (70, 100, and 160 $μ$m) and the three SPIRE bands (250, 350, and 500 $μ$m), optimized to reveal structures at both high and low surface brightness levels, with images scaled to simplify comparison of structures in the same physical areas of $\sim$$100\times100$ kpc$^2$. Flux densities of companion galaxies in merging systems are provided where possible, depending on their angular separation and the spatial resolution in each passband, along with integrated system fluxes (sum of components). This dataset constitutes the imaging and photometric component of the GOALS Herschel OT1 observing program, and is complementary to atlases presented for the Hubble Space Telescope (Evans et al. 2017, in prep.), Spitzer Space Telescope (Mazzarella et al. 2017, in prep.), and Chandra X-ray Observatory (Iwasawa et al. 2011, 2017, in prep.). Collectively these data will enable a wide range of detailed studies of AGN and starburst activity within the most luminous infrared galaxies in the local Universe. △ Less

Submitted 6 February, 2017; originally announced February 2017.

Comments: Accepted for publication in ApJS, 270 pages, 216 figures, 4 tables

Instantaneously complete Yamabe flow on hyperbolic space

Authors: Mario B. Schulz

Abstract: We prove global existence of instantaneously complete Yamabe flows on hyperbolic space of arbitrary dimension $m\geq3$. The initial metric is assumed to be conformally hyperbolic with conformal factor and scalar curvature bounded from above. We do not require initial completeness or bounds on the Ricci curvature. If the initial data are rotationally symmetric, the solution is proven to be unique i… ▽ More We prove global existence of instantaneously complete Yamabe flows on hyperbolic space of arbitrary dimension $m\geq3$. The initial metric is assumed to be conformally hyperbolic with conformal factor and scalar curvature bounded from above. We do not require initial completeness or bounds on the Ricci curvature. If the initial data are rotationally symmetric, the solution is proven to be unique in the class of instantaneously complete, rotationally symmetric Yamabe flows. △ Less

Submitted 31 October, 2019; v1 submitted 8 December, 2016; originally announced December 2016.

MSC Class: 53C44; 35K55; 35A01; 35A02

Journal ref: Calc. Var. (2019) 58: 190

Far Infrared Variability of Sagittarius A*: 25.5 Hours of Monitoring with $Herschel$

Authors: Jordan M. Stone, D. P. Marrone, C. D. Dowell, B. Schulz, C. O. Heinke, F. Yusef-Zadeh

Abstract: Variable emission from Sgr~A*, the luminous counterpart to the super-massive black hole at the center of our Galaxy, arises from the innermost portions of the accretion flow. Better characterization of the variability is important for constraining models of the low-luminosity accretion mode powering Sgr~A*, and could further our ability to use variable emission as a probe of the strong gravitation… ▽ More Variable emission from Sgr~A*, the luminous counterpart to the super-massive black hole at the center of our Galaxy, arises from the innermost portions of the accretion flow. Better characterization of the variability is important for constraining models of the low-luminosity accretion mode powering Sgr~A*, and could further our ability to use variable emission as a probe of the strong gravitational potential in the vicinity of the $4\times10^{6}\mathrm{M}_{\odot}$ black hole. We use the \textit{Herschel} Spectral and Photometric Imaging Receiver (SPIRE) to monitor Sgr~A* at wavelengths that are difficult or impossible to observe from the ground. We find highly significant variations at 0.25, 0.35, and 0.5 mm, with temporal structure that is highly correlated across these wavelengths. While the variations correspond to $<$1% changes in the total intensity in the \textit{Herschel} beam containing Sgr~A*, comparison to independent, simultaneous observations at 0.85 mm strongly supports the reality of the variations. The lowest point in the light curves, $\sim$0.5 Jy below the time-averaged flux density, places a lower bound on the emission of Sgr~A* at 0.25 mm, the first such constraint on the THz portion of the SED. The variability on few hour timescales in the SPIRE light curves is similar to that seen in historical 1.3 mm data, where the longest time series is available, but the distribution of variations in the sub-mm do not show a tail of large-amplitude variations seen at 1.3 mm. Simultaneous X-ray photometry from XMM-Newton shows no significant variation within our observing period, which may explain the lack of very large variations if X-ray and submillimeter flares are correlated. △ Less

Submitted 17 May, 2016; originally announced May 2016.

Comments: Accepted for publication in ApJ

Hi-GAL, the Herschel infrared Galactic Plane Survey: photometric maps and compact source catalogues. First data release for Inner Milky Way: +68°> l > -70°

Authors: S. Molinari, E. Schisano, D. Elia, M. Pestalozzi, A. Traficante, S. Pezzuto, B. M. Swinyard, A. Noriega-Crespo, J. Bally, T. J. T. Moore, R. Plume, A. Zavagno, A. M. di Giorgio, S. J. Liu, G. L. Pilbratt, J. C. Mottram, D. Russeil, L. Piazzo, M. Veneziani, M. Benedettini, L. Calzoletti, F. Faustini, P. Natoli, F. Piacentini, M. Merello , et al. (40 additional authors not shown)

Abstract: (Abridged) We present the first public release of high-quality data products (DR1) from Hi-GAL, the {\em Herschel} infrared Galactic Plane Survey. Hi-GAL is the keystone of a suite of continuum Galactic Plane surveys from the near-IR to the radio, and covers five wavebands at 70, 160, 250, 350 and 500 micron, encompassing the peak of the spectral energy distribution of cold dust for 8 < T < 50K. T… ▽ More (Abridged) We present the first public release of high-quality data products (DR1) from Hi-GAL, the {\em Herschel} infrared Galactic Plane Survey. Hi-GAL is the keystone of a suite of continuum Galactic Plane surveys from the near-IR to the radio, and covers five wavebands at 70, 160, 250, 350 and 500 micron, encompassing the peak of the spectral energy distribution of cold dust for 8 < T < 50K. This first Hi-GAL data release covers the inner Milky Way in the longitude range 68° > l > -70° in a |b|<1° latitude strip. Photometric maps have been produced with the ROMAGAL pipeline, that optimally capitalizes on the excellent sensitivity and stability of the bolometer arrays of the {\em Herschel} PACS and SPIRE photometric cameras, to deliver images of exquisite quality and dynamical range, absolutely calibrated with {\em Planck} and {\em IRAS}, and recovering extended emission at all wavelengths and all spatial scales. The compact source catalogues have been generated with the CuTEx algorithm, specifically developed to optimize source detection and extraction in the extreme conditions of intense and spatially varying background that are found in the Galactic Plane in the thermal infrared. Hi-GAL DR1 images will be accessible via a dedicated web-based image cutout service. The DR1 Compact Source Catalogues are delivered as single-band photometric lists containing, in addition to source position, peak and integrated flux and source sizes, a variety of parameters useful to assess the quality and reliability of the extracted sources, caveats and hints to help this assessment are provided. Flux completeness limits in all bands are determined from extensive synthetic source experiments and depend on the specific line of sight along the Galactic Plane. Hi-GAL DR1 catalogues contain 123210, 308509, 280685, 160972 and 85460 compact sources in the five bands, respectively. △ Less

Submitted 20 April, 2016; originally announced April 2016.

Comments: Astronomy & Astrophysics, accepted

Star Formation in Luminous Quasars at 2<z<3

Authors: Kathryn Harris, Duncan Farrah, Bernhard Schulz, Evanthia Hatziminaoglou, Marco Viero, Nick Anderson, Matthieu Bethermin, Scott Chapman, David L. Clements, Asantha Cooray, Andreas Efstathiou, Anne Feltre, Peter Hurley, Eduardo Ibar, Mark Lacy, Sebastian Oliver, Mathew J. Page, Ismael Perez-Fournon, Sara M. Petty, Lura K. Pitchford, Dimitra Rigopoulou, Douglas Scott, Myrto Symeonidis, Joaquin Vieira, Lingyu Wang

Abstract: We investigate the relation between star formation rates ($\dot{M}_{s}$) and AGN properties in optically selected type 1 quasars at $2<z<3$ using data from Herschel and the SDSS. We find that $\dot{\rm{M}}_s$ remains approximately constant with redshift, at $300\pm100~\rm{M}_{\odot}$yr$^{-1}$. Conversely, $\dot{\rm{M}}_s$ increases with AGN luminosity, up to a maximum of $\sim600~\rm{M}_{\odot}$yr… ▽ More We investigate the relation between star formation rates ($\dot{M}_{s}$) and AGN properties in optically selected type 1 quasars at $2<z<3$ using data from Herschel and the SDSS. We find that $\dot{\rm{M}}_s$ remains approximately constant with redshift, at $300\pm100~\rm{M}_{\odot}$yr$^{-1}$. Conversely, $\dot{\rm{M}}_s$ increases with AGN luminosity, up to a maximum of $\sim600~\rm{M}_{\odot}$yr$^{-1}$, and with CIV FWHM. In context with previous results, this is consistent with a relation between $\dot{\rm{M}}_s$ and black hole accretion rate ($\dot{\rm{M}}_{bh}$) existing in only parts of the $z-\dot{\rm{M}}_{s}-\dot{\rm{M}}_{bh}$ plane, dependent on the free gas fraction, the trigger for activity, and the processes that may quench star formation. The relations between $\dot{\rm{M}}_s$ and both AGN luminosity and CIV FWHM are consistent with star formation rates in quasars scaling with black hole mass, though we cannot rule out a separate relation with black hole accretion rate. Star formation rates are observed to decline with increasing CIV equivalent width. This decline can be partially explained via the Baldwin effect, but may have an additional contribution from one or more of three factors; $M_i$ is not a linear tracer of L$_{2500}$, the Baldwin effect changes form at high AGN luminosities, and high CIV EW values signpost a change in the relation between $\dot{\rm{M}}_s$ and $\dot{\rm{M}}_{bh}$. Finally, there is no strong relation between $\dot{\rm{M}}_s$ and Eddington ratio, or the asymmetry of the CIV line. The former suggests that star formation rates do not scale with how efficiently the black hole is accreting, while the latter is consistent with CIV asymmetries arising from orientation effects. △ Less

Submitted 8 February, 2016; originally announced February 2016.

Comments: MNRAS, accepted

The HerMES sub-millimetre local and low-redshift luminosity functions

Authors: L. Marchetti, M. Vaccari, A. Franceschini, V. Arumugam, H. Aussel, M. Bethermin, J. Bock, A. Boselli, V. Buat, D. Burgarella, D. L. Clements, A. Conley, L. Conversi, A. Cooray, C. D. Dowell, D. Farrah, A. Feltre, J. Glenn, M. Griffin, E. Hatziminaoglou, S. Heinis, E. Ibar, R. J. Ivison, H. T. Nguyen, B. O'Halloran , et al. (22 additional authors not shown)

Abstract: We used wide area surveys over 39 deg$^2$ by the HerMES collaboration, performed with the Herschel Observatory SPIRE multi-wavelength camera, to estimate the low-redshift, $0.02<z<0.5$, monochromatic luminosity functions (LFs) of galaxies at 250, 350 and 500$\,μ$m. SPIRE flux densities were also combined with Spitzer photometry and multi-wavelength archival data to perform a complete SED fitting a… ▽ More We used wide area surveys over 39 deg$^2$ by the HerMES collaboration, performed with the Herschel Observatory SPIRE multi-wavelength camera, to estimate the low-redshift, $0.02<z<0.5$, monochromatic luminosity functions (LFs) of galaxies at 250, 350 and 500$\,μ$m. SPIRE flux densities were also combined with Spitzer photometry and multi-wavelength archival data to perform a complete SED fitting analysis of SPIRE detected sources to calculate precise k-corrections, as well as the bolometric infrared (8-1000$\,μ$m) luminosity functions and their low-$z$ evolution from a combination of statistical estimators. Integration of the latter prompted us to also compute the local luminosity density (LLD) and the comoving star formation rate density (SFRD) for our sources, and to compare them with theoretical predictions of galaxy formation models. The luminosity functions show significant and rapid luminosity evolution already at low redshifts, $0.02<z<0.2$, with L$_{IR}^* \propto (1+z)^{6.0\pm0.4}$ and $Φ_{IR}^* \propto (1+z)^{-2.1\pm0.4}$, L$_{250}^* \propto (1+z)^{5.3\pm0.2}$ and $Φ_{250}^* \propto (1+z)^{-0.6\pm0.4}$ estimated using the IR bolometric and the 250$\,μ$m LFs respectively. Converting our IR LD estimate into an SFRD assuming a standard Salpeter IMF and including the unobscured contribution based on the UV dust-uncorrected emission from local galaxies, we estimate a SFRD scaling of SFRD$_0+0.08 z$, where SFRD$_0\simeq (1.9\pm 0.03)\times 10^{-2} [\mathrm{M}_\odot\,\mathrm{Mpc}^{-3}]$ is our total SFRD estimate at $z\sim0.02$. △ Less

Submitted 19 November, 2015; originally announced November 2015.

Comments: Accepted for publication by MNRAS on 17 Nov 2015

The Herschel Point Source Catalogue

Authors: Gábor Marton, Bernhard Schulz, Bruno Altieri, Luca Calzoletti, Csaba Kiss, Tanya Lim, Nanyao Lu, Roberta Paladini, Andreas Papageorgiou, Chris Pearson, John Rector, David Shupe, Ivan Valtchanov, Erika Varga-Verebélyi, Kevin Xu

Abstract: The Herschel Space Observatory was the fourth cornerstone mission in the European Space Agency (ESA) science programme with excellent broad band imaging capabilities in the sub-mm and far-infrared part of the spectrum. Although the spacecraft finished its observations in 2013, it left a large legacy dataset that is far from having been fully scrutinised and still has a large potential for new scie… ▽ More The Herschel Space Observatory was the fourth cornerstone mission in the European Space Agency (ESA) science programme with excellent broad band imaging capabilities in the sub-mm and far-infrared part of the spectrum. Although the spacecraft finished its observations in 2013, it left a large legacy dataset that is far from having been fully scrutinised and still has a large potential for new scientific discoveries. This is specifically true for the photometric observations of the PACS and SPIRE instruments. Some source catalogues have already been produced by individual observing programs, but there are many observations that risk to remain unexplored. To maximise the science return of the SPIRE and PACS data sets, we are in the process of building the Herschel Point Source Catalogue (HPSC) from all primary and parallel mode observations. Our homogeneous source extraction enables a systematic and unbiased comparison of sensitivity across the different Herschel fields that single programs will generally not be able to provide. The catalogue will be made available online through archives like the Herschel Science Archive (HSA), the Infrared Science Archive (IRSA), and the Strasbourg Astronomical Data Center (CDS). △ Less

Submitted 27 October, 2015; originally announced October 2015.

Comments: 2 pages, 1 figure

Tuning the critical solution temperature of polymers by copolymerization

Authors: Bernhard Schulz, Richard Chudoba, Jan Heyda, Joachim Dzubiella

Abstract: We study statistical copolymerization effects on the upper critical solution temperature (CST) of generic homopolymers by means of coarse-grained Langevin dynamics computer simulations and mean-field theory. Our systematic investigation reveals that the CST can change monotonically or non-monotonically with copolymerization, as observed in experimental studies, depending on the degree of non-addit… ▽ More We study statistical copolymerization effects on the upper critical solution temperature (CST) of generic homopolymers by means of coarse-grained Langevin dynamics computer simulations and mean-field theory. Our systematic investigation reveals that the CST can change monotonically or non-monotonically with copolymerization, as observed in experimental studies, depending on the degree of non-additivity of the monomer (A-B) cross-interactions. The simulation findings are confirmed and qualitatively explained by a combination of a two-component Flory-de Gennes model for polymer collapse and a simple thermodynamic expansion approach. Our findings provide some rationale behind the effects of copolymerization and may be helpful for tuning CST behavior of polymers in soft material design. △ Less

Submitted 8 October, 2015; originally announced October 2015.

Comments: 8 pages, 6 figures

Journal ref: J. Chem. Phys. 143, 243119 (2015)

Comparison of absolute gain photometric calibration between Planck/HFI and Herschel/SPIRE at 545 and 857 GHz

Authors: B. Bertincourt, G. Lagache, B. Schulz, L. Conversi, K. Dassas, P. G. Martin, L. Maurin, A. Abergel, A. Beelen, J-P. Bernard, B. P. Crill, H. Dole, S. Eales, J. E. Gudmundsson, E. Lellouch, R. Moreno, O. Perdereau

Abstract: We compare the absolute gain photometric calibration of the Planck/HFI and Herschel/SPIRE instruments on diffuse emission. The absolute calibration of HFI and SPIRE each relies on planet flux measurements and comparison with theoretical far-infrared emission models of planetary atmospheres. We measure the photometric cross calibration between the instruments at two overlap** bands, 545 GHz / 500… ▽ More We compare the absolute gain photometric calibration of the Planck/HFI and Herschel/SPIRE instruments on diffuse emission. The absolute calibration of HFI and SPIRE each relies on planet flux measurements and comparison with theoretical far-infrared emission models of planetary atmospheres. We measure the photometric cross calibration between the instruments at two overlap** bands, 545 GHz / 500 $μ$m and 857 GHz / 350 $μ$m. The SPIRE maps used have been processed in the Herschel Interactive Processing Environment (Version 12) and the HFI data are from the 2015 Public Data Release 2. For our study we used 15 large fields observed with SPIRE, which cover a total of about 120 deg^2. We have selected these fields carefully to provide high signal-to-noise ratio, avoid residual systematics in the SPIRE maps, and span a wide range of surface brightness. The HFI maps are bandpass-corrected to match the emission observed by the SPIRE bandpasses. The SPIRE maps are convolved to match the HFI beam and put on a common pixel grid. We measure the cross-calibration relative gain between the instruments using two methods in each field, pixel-to-pixel correlation and angular power spectrum measurements. The SPIRE / HFI relative gains are 1.047 ($\pm$ 0.0069) and 1.003 ($\pm$ 0.0080) at 545 and 857 GHz, respectively, indicating very good agreement between the instruments. These relative gains deviate from unity by much less than the uncertainty of the absolute extended emission calibration, which is about 6.4% and 9.5% for HFI and SPIRE, respectively, but the deviations are comparable to the values 1.4% and 5.5% for HFI and SPIRE if the uncertainty from models of the common calibrator can be discounted. Of the 5.5% uncertainty for SPIRE, 4% arises from the uncertainty of the effective beam solid angle, which impacts the adopted SPIRE point source to extended source unit conversion factor (Abridged) △ Less

Submitted 7 April, 2016; v1 submitted 6 September, 2015; originally announced September 2015.

Comments: 13 pages, 10 figures; Incorporates revisions in response to referee comments; cross calibration factors unchanged

Journal ref: A&A 588, A107 (2016)

HerMES: Current Cosmic Infrared Background Estimates Can be Explained by Known Galaxies and their Faint Companions at z < 4

Authors: M. P. Viero, L. Moncelsi, R. F. Quadri, M. Béthermin, J. J. Bock, D. Burgarella, S. C. Chapman, D. L. Clements, A. Conley, L. Conversi, S. Duivenvoorden, J. S. Dunlop, D. Farrah, A. Franceschini, M. Halpern, R. J. Ivison, G. Lagache, G. Magdis, L. Marchetti, J. Álvarez-Márquez, G. Marsden, S. J. Oliver, M. J. Page, I. Pérez-Fournon, B. Schulz , et al. (6 additional authors not shown)

Abstract: We report contributions to cosmic infrared background (CIB) intensities originating from known galaxies and their faint companions at submillimeter wavelengths. Using the publicly-available UltraVISTA catalog, and maps at 250, 350, and 500 μm from the \emph{Herschel} Multi-tiered Extragalactic Survey (HerMES), we perform a novel measurement that exploits the fact that uncatalogued sources may bias… ▽ More We report contributions to cosmic infrared background (CIB) intensities originating from known galaxies and their faint companions at submillimeter wavelengths. Using the publicly-available UltraVISTA catalog, and maps at 250, 350, and 500 μm from the \emph{Herschel} Multi-tiered Extragalactic Survey (HerMES), we perform a novel measurement that exploits the fact that uncatalogued sources may bias stacked flux densities --- particularly if the resolution of the image is poor --- and intentionally smooth the images before stacking and summing intensities. By smoothing the maps we are capturing the contribution of faint (undetected in K_S ~ 23.4) sources that are physically associated, or correlated, with the detected sources. We find that the cumulative CIB increases with increased smoothing, reaching 9.82 +- 0.78, 5.77 +- 0.43, and 2.32 +- 0.19$\, \rm nW m^{-2} sr^{-1}$ at 250, 350, and 500 μm at 300 arcsec FWHM. This corresponds to a fraction of the fiducial CIB of 0.94 +- 0.23, 1.07 +- 0.31, and 0.97 +- 0.26 at 250, 350, and 500 μm, where the uncertainties are dominated by those of the absolute CIB. We then propose, with a simple model combining parametric descriptions for stacked flux densities and stellar mass functions, that emission from galaxies with log(M/Msun) > 8.5 can account for the most of the measured total intensities, and argue against contributions from extended, diffuse emission. Finally, we discuss prospects for future survey instruments to improve the estimates of the absolute CIB levels, and observe any potentially remaining emission at z > 4. △ Less

Submitted 8 August, 2015; v1 submitted 22 May, 2015; originally announced May 2015.

Comments: Accepted to ApJL. 6 Pages, 3 figures

Measuring Star-formation Rate and Far-Infrared Color in High-redshift Galaxies Using the CO (7-6) and [NII] 205 micron Lines

Authors: Nanyao Lu, Yinghe Zhao, C. Kevin Xu, Yu Gao, Tanio Diaz-Santos, Vassilis Charmandaris, Hanae Inami, Justin Howell, Lijie Liu, Lee Armus, Joseph Mazzarella, George C. Privon, Steven D. Lord, David B. Sanders, Bernhard Schulz, Paul P. van der Werf

Abstract: To better characterize the global star formation (SF) activity in a galaxy, one needs to know not only the star formation rate (SFR) but also the rest-frame, far-infrared (FIR) color (e.g., the 60-to-100 $μ$m color, $C(60/100)$] of the dust emission. The latter probes the average intensity of the dust heating radiation field and scales statistically with the effective SFR surface density in star-f… ▽ More To better characterize the global star formation (SF) activity in a galaxy, one needs to know not only the star formation rate (SFR) but also the rest-frame, far-infrared (FIR) color (e.g., the 60-to-100 $μ$m color, $C(60/100)$] of the dust emission. The latter probes the average intensity of the dust heating radiation field and scales statistically with the effective SFR surface density in star-forming galaxies including (ultra-)luminous infrared galaxies [(U)LIRGs]. To this end, we exploit here a new spectroscopic approach involving only two emission lines: CO\,(7$-$6) at 372 $μ$m and [NII] at 205 $μ$m. For local (U)LIRGs, the ratios of the CO (7$-$6) luminosity ($L_{\rm CO\,(7-6)}$) to the total infrared luminosity ($L_{\rm IR}$; 8$-$1000 $μ$m) are fairly tightly distributed (to within $\sim$0.12 dex) and show little dependence on $C(60/100)$. This makes $L_{\rm CO\,(7-6)}$ a good SFR tracer, which is less contaminated by active galactic nuclei (AGN) than $L_{\rm IR}$ and may also be much less sensitive to metallicity than $L_{\rm CO\,(1-0)}$. Furthermore, the logarithmic [NII] 205 $μ$m to CO (7$-$6) luminosity ratio is fairly steeply (at a slope of $\sim$$-1.4$) correlated with $C(60/100)$, with a modest scatter ($\sim$0.23 dex). This makes it a useful estimator on $C(60/100)$ with an implied uncertainty of $\sim$0.15 [or $\lesssim$4 K in the dust temperature ($T_{\rm dust}$) in the case of a graybody emission with $T_{\rm dust} \gtrsim 30$ K and a dust emissivity index $β\ge 1$]. Our locally calibrated SFR and $C(60/100)$ estimators are shown to be consistent with the published data of (U)LIRGs of $z$ up to $\sim$6.5. △ Less

Submitted 6 March, 2015; originally announced March 2015.

Comments: 6 pages, 3 figures, 1 table; accepted for publication in the ApJ Letter

Resonances in ultracold dipolar atomic and molecular gases

Authors: Bruno Schulz, Simon Sala, Alejandro Saenz

Abstract: A previously developed approach for the numerical treatment of two particles that are confined in a finite optical-lattice potential and interact via an arbitrary isotropic interaction potential has been extended to incorporate an additional anisotropic dipole-dipole interaction. The interplay of a model but realistic short-range Born-Oppenheimer potential and the dipole-dipole interaction for two… ▽ More A previously developed approach for the numerical treatment of two particles that are confined in a finite optical-lattice potential and interact via an arbitrary isotropic interaction potential has been extended to incorporate an additional anisotropic dipole-dipole interaction. The interplay of a model but realistic short-range Born-Oppenheimer potential and the dipole-dipole interaction for two confined particles is investigated. A variation of the strength of the dipole-dipole interaction leads to diverse resonance phenomena. In a harmonic confinement potential some resonances show similarities to $s$-wave scattering resonances while in an anharmonic trap** potential like the one of an optical lattice inelastic confinement-induced dipolar resonances occur. The latter are due to a coupling of the relative and center-of-mass motion caused by the anharmonicity of the external confinement. △ Less

Submitted 9 December, 2014; originally announced December 2014.

Comments: 24 pages, 12 figures

MSC Class: 81V45; 81V55