Showing 1–13 of 13 results for author: Schofield, C

Surface lattice resonance lasers with epitaxial InP gain medium

Authors: Anna Fischer, Toby Severs Millard, Xiaofei Xiao, T. V. Raziman, Jakub Dranczewski, Ross C. Schofield, Heinz Schmid, Kirsten Moselund, Riccardo Sapienza, Rupert Oulton

Abstract: Surface lattice resonance (SLR) lasers, where gain is supplied by a thin film active material and the feedback comes from multiple scattering by plasmonic nanoparticles, have shown both low threshold lasing and tunability of the angular and spectral emission. However, typically used materials such as organic dyes and QD films suffer from photo-degradation which hampers practical applications. Here… ▽ More Surface lattice resonance (SLR) lasers, where gain is supplied by a thin film active material and the feedback comes from multiple scattering by plasmonic nanoparticles, have shown both low threshold lasing and tunability of the angular and spectral emission. However, typically used materials such as organic dyes and QD films suffer from photo-degradation which hampers practical applications. Here, we demonstrate photo-stable single-mode lasing of SLR modes sustained in an epitaxial solid-state InP slab waveguide. The nanoparticle array is weakly coupled to the optical modes, which decreases the scattering losses and hence the experimental lasing threshold is as low as 90 $μ$J/cm$^{2}$. The nanoparticle periodicity defines the lasing wavelength and enables tuneable emission wavelengths over a 70 nm spectral range. Combining plasmonic nanoparticles with an epitaxial solid-state gain medium paves the way for large-area on-chip integrated SLR lasers for applications including optical communication, optical computing, sensing, and LiDAR. △ Less

Submitted 11 March, 2024; originally announced March 2024.

Bose-Einstein Condensation of Light in a Semiconductor Quantum Well Microcavity

Authors: Ross C. Schofield, Ming Fu, Edmund Clarke, Ian Farrer, Aristotelis Trapalis, Himadri S. Dhar, Rick Mukherjee, Jon Heffernan, Florian Mintert, Robert A. Nyman, Rupert F. Oulton

Abstract: When particles with integer spin accumulate at low temperature and high density they undergo Bose-Einstein condensation (BEC). Atoms, solid-state excitons and excitons coupled to light all exhibit BEC, which results in high coherence due to massive occupation of the respective system's ground state. Surprisingly, photons were shown to exhibit BEC much more recently in organic dye-filled optical mi… ▽ More When particles with integer spin accumulate at low temperature and high density they undergo Bose-Einstein condensation (BEC). Atoms, solid-state excitons and excitons coupled to light all exhibit BEC, which results in high coherence due to massive occupation of the respective system's ground state. Surprisingly, photons were shown to exhibit BEC much more recently in organic dye-filled optical microcavities, which, owing to the photon's low mass, occurs at room temperature. Here we demonstrate that photons within an inorganic semiconductor microcavity also thermalise and undergo BEC. Although semiconductor lasers are understood to operate out of thermal equilibrium, we identify a region of good thermalisation in our system where we can clearly distinguish laser action from BEC. Based on well-developed technology, semiconductor microcavities are a robust system for exploring the physics and applications of quantum statistical photon condensates. Notably, photon BEC is an alternative to exciton-based BECs, which dissociate under high excitation and often require cryogenic operating conditions. In practical terms, photon BECs offer their critical behaviour at lower thresholds than lasers. Our study shows two further advantages of photon BEC in semiconductor materials: the lack of dark electronic states allows these BECs to be sustained continuously; and semiconductor quantum wells offer strong photon-photon scattering. We measure an unoptimised interaction parameter, $\tilde{g}=0.0023\pm0.0003$, which is large enough to access the rich physics of interactions within BECs, such as superfluid light or vortex formation. △ Less

Submitted 27 June, 2023; originally announced June 2023.

Comments: 15 pages, 4 figures

Accelerating Inhibitor Discovery With A Deep Generative Foundation Model: Validation for SARS-CoV-2 Drug Targets

Authors: Vijil Chenthamarakshan, Samuel C. Hoffman, C. David Owen, Petra Lukacik, Claire Strain-Damerell, Daren Fearon, Tika R. Malla, Anthony Tumber, Christopher J. Schofield, Helen M. E. Duyvesteyn, Wanwisa Dejnirattisai, Loic Carrique, Thomas S. Walter, Gavin R. Screaton, Tetiana Matviiuk, Aleksandra Mojsilovic, Jason Crain, Martin A. Walsh, David I. Stuart, Payel Das

Abstract: The discovery of novel inhibitor molecules for emerging drug-target proteins is widely acknowledged as a challenging inverse design problem: Exhaustive exploration of the vast chemical search space is impractical, especially when the target structure or active molecules are unknown. Here we validate experimentally the broad utility of a deep generative framework trained at-scale on protein sequenc… ▽ More The discovery of novel inhibitor molecules for emerging drug-target proteins is widely acknowledged as a challenging inverse design problem: Exhaustive exploration of the vast chemical search space is impractical, especially when the target structure or active molecules are unknown. Here we validate experimentally the broad utility of a deep generative framework trained at-scale on protein sequences, small molecules, and their mutual interactions -- that is unbiased toward any specific target. As demonstrators, we consider two dissimilar and relevant SARS-CoV-2 targets: the main protease and the spike protein (receptor binding domain, RBD). To perform target-aware design of novel inhibitor molecules, a protein sequence-conditioned sampling on the generative foundation model is performed. Despite using only the target sequence information, and without performing any target-specific adaptation of the generative model, micromolar-level inhibition was observed in in vitro experiments for two candidates out of only four synthesized for each target. The most potent spike RBD inhibitor also exhibited activity against several variants in live virus neutralization assays. These results therefore establish that a single, broadly deployable generative foundation model for accelerated hit discovery is effective and efficient, even in the most general case where neither target structure nor binder information is available. △ Less

Submitted 14 October, 2022; v1 submitted 19 April, 2022; originally announced April 2022.

Comments: Revised title, abstract, and text; additional figures

Photon indistinguishability measurements under pulsed and continuous excitation

Authors: Ross C. Schofield, Chloe Clear, Rowan A. Hoggarth, Kyle D. Major, Dara P. S. McCutcheon, Alex S. Clark

Abstract: The indistinguishability of successively generated photons from a single quantum emitter is most commonly measured using two-photon interference at a beam splitter. Whilst for sources excited in the pulsed regime the measured bunching of photons reflects the full wavepacket indistinguishability of the emitted photons, for continuous wave (cw) excitation the inevitable dependence on detector timing… ▽ More The indistinguishability of successively generated photons from a single quantum emitter is most commonly measured using two-photon interference at a beam splitter. Whilst for sources excited in the pulsed regime the measured bunching of photons reflects the full wavepacket indistinguishability of the emitted photons, for continuous wave (cw) excitation the inevitable dependence on detector timing resolution and driving strength obscures the underlying photon interference process. Here we derive a method to extract the photon indistinguishability from cw measurements by considering the relevant correlation functions. The equivalence of both methods is experimentally verified through comparison of cw and pulsed excitation of an archetypal source of photons, a single molecule. △ Less

Submitted 20 July, 2021; originally announced July 2021.

Comments: 6 page paper, 11 page supplement. Comments welcome

Journal ref: Phys. Rev. Research 4, 013037 (2022)

Coherent characterisation of a single molecule in a photonic black box

Authors: Sebastien Boissier, Ross C. Schofield, Lin **, Anna Ovvyan, Salahuddin Nur, Frank H. L. Koppens, Costanza Toninelli, Wolfram H. P. Pernice, Kyle D. Major, E. A. Hinds, Alex S. Clark

Abstract: Extinction spectroscopy is a powerful tool for demonstrating the coupling of a single quantum emitter to a photonic structure. However, it can be challenging in all but the simplest of geometries to deduce an accurate value of the coupling efficiency from the measured spectrum. Here we develop a theoretical framework to deduce the coupling efficiency from the measured transmission and reflection s… ▽ More Extinction spectroscopy is a powerful tool for demonstrating the coupling of a single quantum emitter to a photonic structure. However, it can be challenging in all but the simplest of geometries to deduce an accurate value of the coupling efficiency from the measured spectrum. Here we develop a theoretical framework to deduce the coupling efficiency from the measured transmission and reflection spectra without precise knowledge of the photonic environment. We then consider the case of a waveguide interrupted by a transverse cut in which an emitter is placed. We apply that theory to a silicon nitride waveguide interrupted by a gap filled with anthracene that is doped with dibenzoterrylene molecules. We describe the fabrication of these devices, and experimentally characterise the waveguide coupling of a single molecule in the gap. △ Less

Submitted 28 July, 2020; originally announced July 2020.

Comments: 10 page article with 3 figures and 6 page supplementary information with 3 figures. Comments welcome

Journal ref: Nature Communications 12, 706 (2021)

Polymer-encapsulated organic nanocrystals for single photon emission

Authors: Ross C. Schofield, Dominika P. Bogusz, Rowan A. Hoggarth, Salahuddin Nur, Kyle D. Major, Alex S. Clark

Abstract: We demonstrate an emulsion-polymerisation technique to embed dibenzoterrylene-doped anthracene nanocrystals in polymethyl methacrylate (PMMA) nanocapsules. The nanocapsules require no further protection after fabrication and are resistant to sublimation compared to unprotected anthracene. The room temperature emission from single dibenzoterrylene molecules is stable and when cooled to cryogenic te… ▽ More We demonstrate an emulsion-polymerisation technique to embed dibenzoterrylene-doped anthracene nanocrystals in polymethyl methacrylate (PMMA) nanocapsules. The nanocapsules require no further protection after fabrication and are resistant to sublimation compared to unprotected anthracene. The room temperature emission from single dibenzoterrylene molecules is stable and when cooled to cryogenic temperatures we see no change in their excellent optical properties compared to existing growth methods. These now robust nanocapsules have potential for surface functionalisation and integration into nanophotonic devices, where the materials used are compatible with incorporation in polymer-based designs. △ Less

Submitted 5 May, 2020; originally announced May 2020.

Comments: 8 pages, comments welcome

Journal ref: Opt. Mater. Express 10, 1586-1596 (2020)

Phonon-induced optical dephasing in single organic molecules

Authors: Chloe Clear, Ross C. Schofield, Kyle D. Major, Jake Iles-Smith, Alex S. Clark, Dara P. S. McCutcheon

Abstract: Organic molecules have recently gained attention as novel sources of single photons. We present a joint experiment--theory analysis of the temperature-dependent emission spectra, zero-phonon linewidth, and second-order correlation function of light emitted from a single molecule. We observe spectra with a zero-phonon-line together with several additional sharp peaks, broad phonon sidebands, and a… ▽ More Organic molecules have recently gained attention as novel sources of single photons. We present a joint experiment--theory analysis of the temperature-dependent emission spectra, zero-phonon linewidth, and second-order correlation function of light emitted from a single molecule. We observe spectra with a zero-phonon-line together with several additional sharp peaks, broad phonon sidebands, and a strongly temperature dependent homogeneous broadening. Our model includes both localised vibrational modes of the molecule and a thermal phonon bath, which we include non-perturbatively, and is able capture all observed features. For resonant driving we measure Rabi oscillations that become increasingly damped with temperature, which our model naturally reproduces. Our results constitute an essential characterisation of the photon coherence of these promising molecules, paving the way towards their use in future quantum information applications. △ Less

Submitted 13 January, 2020; originally announced January 2020.

Comments: Main text: 5 pages with 3 figures. Supplementary: 8 pages with 4 figures

Journal ref: Phys. Rev. Lett. 124, 153602 (2020)

Electrically pumped WSe$_2$-based light-emitting van der Waals heterostructures embedded in monolithic dielectric microcavities

Authors: O. Del Pozo-Zamudio, A. Genco, S. Schwarz, F. Withers, P. M. Walker, T. Godde, R. C. Schofield, A. P. Rooney, E. Prestat, K. Watanabe, T. Taniguchi, C. Clark, S. J. Haigh, D. N. Krizhanovskii, K. S. Novoselov, A. I. Tartakovskii

Abstract: Vertical stacking of atomically thin layered materials opens new possibilities for the fabrication of heterostructures with favorable optoelectronic properties. The combination of graphene, hexagonal boron nitride and semiconducting transition metal dichalcogenides allows fabrication of electroluminescence (EL) devices, compatible with a wide range of substrates. Here, we demonstrate a full integr… ▽ More Vertical stacking of atomically thin layered materials opens new possibilities for the fabrication of heterostructures with favorable optoelectronic properties. The combination of graphene, hexagonal boron nitride and semiconducting transition metal dichalcogenides allows fabrication of electroluminescence (EL) devices, compatible with a wide range of substrates. Here, we demonstrate a full integration of an electroluminescent van der Waals heterostructure in a monolithic optical microcavity made of two high reflectivity dielectric distributed Bragg reflectors (DBRs). Owing to the presence of graphene and hexagonal boron nitride protecting the WSe$_2$ during the top mirror deposition, we fully preserve the optoelectronic behaviour of the device. Two bright cavity modes appear in the EL spectrum featuring Q-factors of 250 and 580 respectively: the first is attributed directly to the monolayer area, while the second is ascribed to the portion of emission guided outside the WSe$_2$ island. By embedding the EL device inside the microcavity structure, a significant modification of the directionality of the emitted light is achieved, with the peak intensity increasing by nearly two orders of magnitude at the angle of the maximum emission compared with the same EL device without the top DBR. Furthermore, the coupling of the WSe$_2$ EL to the cavity mode with a dispersion allows a tuning of the peak emission wavelength exceeding 35 nm (80 meV) by varying the angle at which the EL is observed from the microcavity. This work provides a route for the development of compact vertical-cavity surface-emitting devices based on van der Waals heterostructures. △ Less

Submitted 4 June, 2020; v1 submitted 15 November, 2019; originally announced November 2019.

Journal ref: O. Del Pozo-Zamudio et al. 2D materials 7 (2020) 3, 031006

Quantum walk inspired algorithm for graph similarity and isomorphism

Authors: Callum Schofield, **gbo B. Wang, Yuying Li

Abstract: Large scale complex systems, such as social networks, electrical power grid, database structure, consumption pattern or brain connectivity, are often modeled using network graphs. Valuable insight can be gained by measuring the similarity between network graphs in order to make quantitative comparisons. Since these networks can be very large, scalability and efficiency of the algorithm are key con… ▽ More Large scale complex systems, such as social networks, electrical power grid, database structure, consumption pattern or brain connectivity, are often modeled using network graphs. Valuable insight can be gained by measuring the similarity between network graphs in order to make quantitative comparisons. Since these networks can be very large, scalability and efficiency of the algorithm are key concerns. More importantly, for graphs with unknown labeling, this graph similarity problem requires exponential time to solve using existing algorithms. In this paper, we propose a quantum walk inspired algorithm, which provides a solution to the graph similarity problem without prior knowledge on graph labeling. This algorithm is capable of distinguishing between minor structural differences, such as between strongly regular graphs with the same parameters. The algorithm has polynomial complexity, scaling with $O(n^9)$. △ Less

Submitted 28 February, 2019; originally announced February 2019.

Efficient excitation of dye molecules for single photon generation

Authors: Ross C. Schofield, Kyle D. Major, Samuele Grandi, Sebastien Boissier, E. A. Hinds, Alex S. Clark

Abstract: A reliable photon source is required for many aspects of quantum technology. Organic molecules are attractive for this application because they can have high quantum yield and can be photostable, even at room temperature. To generate a photon with high probability, a laser must excite the molecule efficiently. We develop a simple model for that efficiency and discuss how to optimise it. We demonst… ▽ More A reliable photon source is required for many aspects of quantum technology. Organic molecules are attractive for this application because they can have high quantum yield and can be photostable, even at room temperature. To generate a photon with high probability, a laser must excite the molecule efficiently. We develop a simple model for that efficiency and discuss how to optimise it. We demonstrate the validity of our model through experiments on a single dibenzoterrylene (DBT) molecule in an anthracene crystal. We show that the excitation probability cannot exceed 75\% at room temperature, but can increase to over 99\% if the sample is cooled to liquid nitrogen temperature. The possibility of high photon generation efficiency with only modest cooling is a significant step towards a reliable photon source that is simple and practical. △ Less

Submitted 22 May, 2018; v1 submitted 27 March, 2018; originally announced March 2018.

Comments: Main article (8 pages), Supplementary material (4 pages). Comments welcome

Journal ref: J. Phys. Commun. 2, 115027 (2018)

Photoluminescence and Raman investigation of stability of InSe and GaSe thin films

Authors: O. Del Pozo-Zamudio, S. Schwarz, J. Klein, R. C. Schofield, E. A. Chekhovich, O. Ceylan, E. Margapoti, A. I. Dmitriev, G. V. Lashkarev, D. N. Borisenko, N. N. Kolesnikov, J. J. Finley, A. I. Tartakovskii

Abstract: Layered III-chalcogenide compounds belong to a variety of layered crystals that can be implemented in van der Waals heterostructures. Here we report an optical study of the stability of two of these compounds: indium selenide (InSe) and gallium selenide (GaSe). Micro-photoluminescence (PL) and Raman spectroscopy are used to determine how the properties of thin films of these materials change when… ▽ More Layered III-chalcogenide compounds belong to a variety of layered crystals that can be implemented in van der Waals heterostructures. Here we report an optical study of the stability of two of these compounds: indium selenide (InSe) and gallium selenide (GaSe). Micro-photoluminescence (PL) and Raman spectroscopy are used to determine how the properties of thin films of these materials change when they are exposed to air at room temperature. We find that in GaSe films, PL signal decreases on average below 50% over 24 (72) hours of exposure for films with thicknesses 10-25 (48-75) nm. In contrast, weak PL decrease of less than 20% is observed for InSe nm films after exposure of 100 hours. Similar trends are observed in Raman spectroscopy: within a week, the Raman signal decreases by a factor of 10 for a 24 nm thick GaSe, whereas no decrease was found for a 16 nm InSe film. We estimate that when exposed to air, the layers adjacent to the GaSe film surface degrade and become non-luminescent with a rate of 0.14$\pm$0.05 nm/hour. We show that the life-time of the GaSe films can be increased by up to two orders of magnitude (to several months) by encapsulation in dielectric materials such as SiO$_2$ or Si$_x$N$_y$. △ Less

Submitted 18 June, 2015; originally announced June 2015.

Optical properties of two-dimensional gallium chalcogenide films

Authors: O. Del Pozo-Zamudio, S. Schwarz, M. Sich, I. A. Akimov, M. Bayer, R. C. Schofield, E. A. Chekhovich, B. J. Robinson, N. D. Kay, O. V. Kolosov, A. I. Dmitriev, G. V. Lashkarev, D. N. Borisenko, N. N. Kolesnikov, A. I. Tartakovskii

Abstract: Gallium chalcogenides are promising building blocks for novel van der Waals heterostructures. We report low-temperature micro-photoluminescence (PL) of GaTe and GaSe films with thickness ranging from from 200 nm to a single unit cell. In both materials, PL shows dramatic decrease by 10$^4$-10$^5$ when film thickness is reduced from 200 to 10 nm. Based on evidence from cw and time-resolved PL, we p… ▽ More Gallium chalcogenides are promising building blocks for novel van der Waals heterostructures. We report low-temperature micro-photoluminescence (PL) of GaTe and GaSe films with thickness ranging from from 200 nm to a single unit cell. In both materials, PL shows dramatic decrease by 10$^4$-10$^5$ when film thickness is reduced from 200 to 10 nm. Based on evidence from cw and time-resolved PL, we propose a model explaining the PL decrease as a result of non-radiative carrier escape via surface states. △ Less

Submitted 17 March, 2015; v1 submitted 9 January, 2015; originally announced January 2015.

Journal ref: 2D Materials, 2 (3), 035010 (2015)

The Physics of the B Factories

Authors: A. J. Bevan, B. Golob, Th. Mannel, S. Prell, B. D. Yabsley, K. Abe, H. Aihara, F. Anulli, N. Arnaud, T. Aushev, M. Beneke, J. Beringer, F. Bianchi, I. I. Bigi, M. Bona, N. Brambilla, J. B rodzicka, P. Chang, M. J. Charles, C. H. Cheng, H. -Y. Cheng, R. Chistov, P. Colangelo, J. P. Coleman, A. Drutskoy , et al. (2009 additional authors not shown)

Abstract: This work is on the Physics of the B Factories. Part A of this book contains a brief description of the SLAC and KEK B Factories as well as their detectors, BaBar and Belle, and data taking related issues. Part B discusses tools and methods used by the experiments in order to obtain results. The results themselves can be found in Part C. Please note that version 3 on the archive is the auxiliary… ▽ More This work is on the Physics of the B Factories. Part A of this book contains a brief description of the SLAC and KEK B Factories as well as their detectors, BaBar and Belle, and data taking related issues. Part B discusses tools and methods used by the experiments in order to obtain results. The results themselves can be found in Part C. Please note that version 3 on the archive is the auxiliary version of the Physics of the B Factories book. This uses the notation alpha, beta, gamma for the angles of the Unitarity Triangle. The nominal version uses the notation phi_1, phi_2 and phi_3. Please cite this work as Eur. Phys. J. C74 (2014) 3026. △ Less

Submitted 31 October, 2015; v1 submitted 24 June, 2014; originally announced June 2014.

Comments: 928 pages, version 3 (arXiv:1406.6311v3) corresponds to the alpha, beta, gamma version of the book, the other versions use the phi1, phi2, phi3 notation

Report number: SLAC-PUB-15968, KEK Preprint 2014-3

Journal ref: Eur. Phys. J. C74 (2014) 3026