Showing 151–200 of 692 results for author: Schneider, M

Adsorption, self-assembly and self-metalation of tetra-cyanophenyl porphyrins on semiconducting CoO(100) films

Authors: Maximilian Ammon, Andreas Raabgrund, M. Alexander Schneider

Abstract: The adsorption properties of free base 5,10,15,20-tetrakis(p-cyanophenyl)porphyrin (2H-TCNPP) on thin films of rock salt (rs) CoO(100) on Au(111) was studied in ultra-high vacuum by a combination of low-temperature scanning tunneling microscopy and spectroscopy (STM/STS) and density functional theory (DFT). Films of rs-CoO(100) on Au(111) are prepared with excellent quality in a suitable thickness… ▽ More The adsorption properties of free base 5,10,15,20-tetrakis(p-cyanophenyl)porphyrin (2H-TCNPP) on thin films of rock salt (rs) CoO(100) on Au(111) was studied in ultra-high vacuum by a combination of low-temperature scanning tunneling microscopy and spectroscopy (STM/STS) and density functional theory (DFT). Films of rs-CoO(100) on Au(111) are prepared with excellent quality in a suitable thickness range. Particularly, we found that films of only 1 nm thickness show a semiconducting energy gap of $E_\mathrm{g}=(2.5\pm 0.2)\,\textrm{eV}$. Upon deposition at 300 K, 2H-TCNPP adsorbs flat-lying and self-assembles in a long-range ordered superstructure that is stable at 80 K. The adsorption geometry of the molecules on the surface and within the self-assembly is analyzed by DFT. We find that the self-assemblies are stabilized by hydrogen bridge bonding via the functional cyano groups. Our STS data shows molecular states within the fundamental gap of the CoO. By comparison with the calculated DOS we determine the energetic positions of the frontier orbitals and find that the first three LUMO states 2H-TCNPP are located within the band gap, whereas the HOMO is shifted 1 eV below the CoO conduction band edge. Upon annealing to 420 K the molecules change their appearance in STM images and a new prominent electronic state located at the center of the molecule is formed. We interpret this changed configuration as Co-TCNPP created by self-metalation on the oxide surface. △ Less

Submitted 22 February, 2022; originally announced February 2022.

Comments: 13 pages, 9 figures. Journal version published by Elsevier was processed without proof reading and contains errors

Journal ref: Surface Science, Volume 720, June 2022, 122044

Entropy of group actions beyond uniform lattices

Authors: Till Hauser, Friedrich Martin Schneider

Abstract: Entropy of measure preserving or continuous actions of amenable discrete groups allows for various equivalent approaches. Among them are the ones given by the techniques developed by Ollagnier and Pinchon on the one hand and the Ornstein-Weiss lemma on the other. We extend these two approaches to the context of actions of amenable topological groups. In contrast to the discrete setting, our result… ▽ More Entropy of measure preserving or continuous actions of amenable discrete groups allows for various equivalent approaches. Among them are the ones given by the techniques developed by Ollagnier and Pinchon on the one hand and the Ornstein-Weiss lemma on the other. We extend these two approaches to the context of actions of amenable topological groups. In contrast to the discrete setting, our results reveal a remarkable difference between the two concepts of entropy in the realm of non-discrete groups: while the first quantity collapses to 0 in the non-discrete case, the second yields a well-behaved invariant for amenable unimodular groups. Concerning the latter, we moreover study the corresponding notion of topological pressure, prove a Goodwyn-type theorem, and establish the equivalence with the uniform lattice approach (for locally compact groups admitting a uniform lattice). Our study elaborates on a version of the Ornstein-Weiss lemma due to Gromov. △ Less

Submitted 4 February, 2022; originally announced February 2022.

MSC Class: 43A07; 22D40; 37A35; 37D35

A high-density polarized 3He gas-jet target for laser-plasma applications

Authors: P. Fedorets, C. Zheng, R. Engels, I. Engin, H. Feilbach, U. Giesen, H. Glückler, C. Kannis, F. Klehr, M. Lennartz, H. Pfeifer, J. Pfennings, C. M. Schneider, N. Schnitzler, H. Soltner, R. Swaczyna, M. Büscher

Abstract: A laser-driven spin-polarized 3He2+ beam source for nuclear-physics experiments and for the investigation of polarized nuclear fusion demands a high-density polarized 3He gas-jet target. Such a target requires a magnetic system providing a permanent homogeneous holding field for the nuclear spins plus a set of coils for adjusting the orientation of the polarization. Starting from a transport vesse… ▽ More A laser-driven spin-polarized 3He2+ beam source for nuclear-physics experiments and for the investigation of polarized nuclear fusion demands a high-density polarized 3He gas-jet target. Such a target requires a magnetic system providing a permanent homogeneous holding field for the nuclear spins plus a set of coils for adjusting the orientation of the polarization. Starting from a transport vessel at a maximum pressure of 3 bar, the helium gas is compressed for a short time and can be injected into a laser-interaction chamber through a non-magnetic opening valve and nozzle, thus forming jets with densities of about a few 10^19 cm-3 and widths of about 1 mm. The target comprises a 3D adjustment system for precise positioning of the jet relative to the laser focus. An auxiliary gas system provides remote target operation and flushing of the gas lines with Ar gas, which helps to reduce polarization losses. The design of the target, its operation procedures and first experimental results are presented. △ Less

Submitted 31 January, 2022; originally announced January 2022.

Comments: 12 pages, 20 figures, submitted to PRAB

Megahertz-rate Ultrafast X-ray Scattering and Holographic Imaging at the European XFEL

Authors: Nanna Zhou Hagström, Michael Schneider, Nico Kerber, Alexander Yaroslavtsev, Erick Burgos Parra, Marijan Beg, Martin Lang, Christian M. Günther, Boris Seng, Fabian Kammerbauer, Horia Popescu, Matteo Pancaldi, Kumar Neeraj, Debanjan Polley, Rahul Jangid, Stjepan B. Hrkac, Sheena K. K. Patel, Sergei Ovcharenko, Diego Turenne, Dmitriy Ksenzov, Christine Boeglin, Igor Pronin, Marina Baidakova, Clemens von Korff Schmising, Martin Borchert , et al. (75 additional authors not shown)

Abstract: The advent of X-ray free-electron lasers (XFELs) has revolutionized fundamental science, from atomic to condensed matter physics, from chemistry to biology, giving researchers access to X-rays with unprecedented brightness, coherence, and pulse duration. All XFEL facilities built until recently provided X-ray pulses at a relatively low repetition rate, with limited data statistics. Here, we presen… ▽ More The advent of X-ray free-electron lasers (XFELs) has revolutionized fundamental science, from atomic to condensed matter physics, from chemistry to biology, giving researchers access to X-rays with unprecedented brightness, coherence, and pulse duration. All XFEL facilities built until recently provided X-ray pulses at a relatively low repetition rate, with limited data statistics. Here, we present the results from the first megahertz repetition rate X-ray scattering experiments at the Spectroscopy and Coherent Scattering (SCS) instrument of the European XFEL. We illustrate the experimental capabilities that the SCS instrument offers, resulting from the operation at MHz repetition rates and the availability of the novel DSSC 2D imaging detector. Time-resolved magnetic X-ray scattering and holographic imaging experiments in solid state samples were chosen as representative, providing an ideal test-bed for operation at megahertz rates. Our results are relevant and applicable to any other non-destructive XFEL experiments in the soft X-ray range. △ Less

Submitted 20 January, 2022; v1 submitted 17 January, 2022; originally announced January 2022.

Comments: 13 pages, 5 figures. Supplementary Information as ancillary file

Journal ref: J. Synchrotron Rad. (2022), 29

Time Orientability and Particle Production from Universal Horizons

Authors: Francesco Del Porro, Mario Herrero-Valea, Stefano Liberati, Marc Schneider

Abstract: We discuss particle production in spacetimes endowed with a universal horizon in Einstein--Aether and Horava gravity. We argue that continuity and differentiability of the lapse function require the orientation of the foliation in the interior of the horizon to be reversed with respect to the exterior one. Unless this is allowed, interaction of gravitating scalar fields with the universal horizon… ▽ More We discuss particle production in spacetimes endowed with a universal horizon in Einstein--Aether and Horava gravity. We argue that continuity and differentiability of the lapse function require the orientation of the foliation in the interior of the horizon to be reversed with respect to the exterior one. Unless this is allowed, interaction of gravitating scalar fields with the universal horizon leads to unitarity violations in the quantum theory. This property is responsible for particle production by the universal horizon, as we show by computing explicitly its Hawking temperature for all stationary and spherically symmetric spacetimes. We particularize our result to known analytic solutions, including those compatible with observational constraints. △ Less

Submitted 27 June, 2022; v1 submitted 10 January, 2022; originally announced January 2022.

Comments: 6 pages, new title, minor changes. Matches journal version

Coupling staggered-grid and vertex-centered finite-volume methods for coupled porous-medium free-flow problems

Authors: Martin Schneider, Dennis Gläser, Kilian Weishaupt, Edward Coltman, Bernd Flemisch, Rainer Helmig

Abstract: In this work, a new discretization approach for coupled free and porous-medium flows is introduced, which uses a finite volume staggered-grid method for the discretization of the Navier-Stokes equations in the free-flow subdomain, while a vertex-centered finite volume method is used in the porous-medium flow domain. The latter allows for the use of unstructured grids in the porous-medium subdomain… ▽ More In this work, a new discretization approach for coupled free and porous-medium flows is introduced, which uses a finite volume staggered-grid method for the discretization of the Navier-Stokes equations in the free-flow subdomain, while a vertex-centered finite volume method is used in the porous-medium flow domain. The latter allows for the use of unstructured grids in the porous-medium subdomain, and the presented method is capable of handling non-matching grids at the interface. In addition, the accurate evaluation of coupling terms and of additional nonlinear velocity-dependent terms in the porous medium is ensured by the use of basis functions and by having degrees of freedom naturally located at the interface. The available advantages of this coupling method are investigated in a series of tests: a convergence test for various grid types, an evaluation of the implementation of coupling conditions, and an example using the velocity dependent Forchheimer term in the porous-medium subdomain. △ Less

Submitted 21 December, 2021; originally announced December 2021.

Exact and Approximate Counting of Database Repairs

Authors: Marco Calautti, Ester Livshits, Andreas Pieris, Markus Schneider

Abstract: A key task in the context of consistent query answering is to count the number of repairs that entail the query, with the ultimate goal being a precise data complexity classification. This has been achieved in the case of primary keys and self-join-free conjunctive queries (CQs) via an FP/#P-complete dichotomy. We lift this result to the more general case of functional dependencies (FDs). Another… ▽ More A key task in the context of consistent query answering is to count the number of repairs that entail the query, with the ultimate goal being a precise data complexity classification. This has been achieved in the case of primary keys and self-join-free conjunctive queries (CQs) via an FP/#P-complete dichotomy. We lift this result to the more general case of functional dependencies (FDs). Another important task in this context is whenever the counting problem in question is intractable, to classify it as approximable, i.e., the target value can be efficiently approximated with error guarantees via a fully polynomial-time randomized approximation scheme (FPRAS), or as inapproximable. Although for primary keys and CQs (even with self-joins) the problem is always approximable, we prove that this is not the case for FDs. We show, however, that the class of FDs with a left-hand side chain forms an island of approximability. We see these results, apart from being interesting in their own right, as crucial steps towards a complete classification of approximate counting of repairs in the case of FDs and self-join-free CQs. △ Less

Submitted 9 April, 2024; v1 submitted 17 December, 2021; originally announced December 2021.

ACM Class: H.2

HAWC Study of the Ultra-High-Energy Spectrum of MGRO J1908+06

Authors: HAWC Collaboration, A. Albert, R. Alfaro, C. Alvarez, J. D. Álvarez, J. R. Angeles Camacho, J. C. Arteaga-Velázquez, D. Avila Rojas, H. A. Ayala Solares, R. Babu, E. Belmont-Moreno, C. Brisbois, K. S. Caballero-Mora, T. Capistrán, A. Carramiñana, S. Casanova, U. Cotti, J. Cotzomi, S. Coutiño de León, E. De la Fuente, C. de León, R. Diaz Hernandez, B. L. Dingus, M. A. DuVernois, M. Durocher , et al. (75 additional authors not shown)

Abstract: We report TeV gamma-ray observations of the ultra-high-energy source MGRO J1908+06 using data from the High Altitude Water Cherenkov (HAWC) Observatory. This source is one of the highest-energy known gamma-ray sources, with emission extending past 200 TeV. Modeling suggests that the bulk of the TeV gamma-ray emission is leptonic in nature, driven by the energetic radio-faint pulsar PSR J1907+0602.… ▽ More We report TeV gamma-ray observations of the ultra-high-energy source MGRO J1908+06 using data from the High Altitude Water Cherenkov (HAWC) Observatory. This source is one of the highest-energy known gamma-ray sources, with emission extending past 200 TeV. Modeling suggests that the bulk of the TeV gamma-ray emission is leptonic in nature, driven by the energetic radio-faint pulsar PSR J1907+0602. Depending on what assumptions are included in the model, a hadronic component may also be allowed. Using the results of the modeling, we discuss implications for detection prospects by multi-messenger campaigns. △ Less

Submitted 8 March, 2022; v1 submitted 1 December, 2021; originally announced December 2021.

Comments: accepted by ApJ, in press

Journal ref: The Astrophysical Journal, Volume 911, Number 2, 2022

Dimensional Expressivity Analysis, best-approximation errors, and automated design of parametric quantum circuits

Authors: Lena Funcke, Tobias Hartung, Karl Jansen, Stefan Kühn, Manuel Schneider, Paolo Stornati

Abstract: The design of parametric quantum circuits (PQCs) for efficient use in variational quantum simulations (VQS) is subject to two competing factors. On one hand, the set of states that can be generated by the PQC has to be large enough to contain the solution state. Otherwise, one may at best find the best approximation of the solution restricted to the states generated by the chosen PQC. On the other… ▽ More The design of parametric quantum circuits (PQCs) for efficient use in variational quantum simulations (VQS) is subject to two competing factors. On one hand, the set of states that can be generated by the PQC has to be large enough to contain the solution state. Otherwise, one may at best find the best approximation of the solution restricted to the states generated by the chosen PQC. On the other hand, the PQC should contain as few parametric quantum gates as possible to minimize noise from the quantum device. Thus, when designing a PQC one needs to ensure that there are no redundant parameters. The dimensional expressivity analysis discussed in these proceedings is a means of addressing these counteracting effects. Its main objective is to identify independent and redundant parameters in the PQC. Using this information, superfluous parameters can be removed and the dimension of the space of states that are generated by the PQC can be computed. Knowing the dimension of the physical state space then allows us to deduce whether or not the PQC can reach all physical states. Furthermore, the dimensional expressivity analysis can be implemented efficiently using a hybrid quantum-classical algorithm. This implementation has relatively small overhead costs both for the classical and quantum part of the algorithm and could therefore be used in the future for on-the-fly circuit construction. This would allow for optimized circuits to be used in every loop of a VQS rather than the same PQC for the entire VQS. These proceedings review and extend work in [1, 2]. △ Less

Submitted 1 December, 2021; v1 submitted 22 November, 2021; originally announced November 2021.

Comments: 12 pages, Proceedings of the 38th International Symposium on Lattice Field Theory, 26th-30th July 2021, Zoom/Gather@Massachusetts Institute of Technology

Report number: MIT-CTP/5349

Probing magnetic anisotropy in Kagome antiferromagnetic Mn$_3$Ge with torque magnetometry

Authors: Yinshang Liu, Hong Xiao, Aobo Yu, Yufeng Wu, Kaustuv Manna, Claudia Felser, Claus Michael Schneider, Hong-Yi Xie, Tao Hu

Abstract: We investigate the magnetic symmetry of the topological antiferromagnetic material Mn$_3$Ge by using torque measurements. Below the Neel temperature, detailed angle-dependent torque measurements were performed on Mn$_3$Ge single crystals in directions parallel and perpendicular to the Kagome basal plane. The out-of plane torque data exhibit $\pm\sinθ$ and $\sin2θ$ behaviors, of which the former re… ▽ More We investigate the magnetic symmetry of the topological antiferromagnetic material Mn$_3$Ge by using torque measurements. Below the Neel temperature, detailed angle-dependent torque measurements were performed on Mn$_3$Ge single crystals in directions parallel and perpendicular to the Kagome basal plane. The out-of plane torque data exhibit $\pm\sinθ$ and $\sin2θ$ behaviors, of which the former results from the spontaneous ferromagnetism within the basal plane and the latter from the in- and out-of-plane susceptibility anisotropy. The reversible component of the in-plane torque exhibits $\sin6\varphi$ behavior, revealing the six-fold symmetry of the in-plane magnetic free energy. Moreover, we find that the free energy minima are pinned to the direction of spontaneous ferromagnetism, which correspond to the maxima of the irreversible component of the in-plane torque. We provide an effective spin model to describe the in-plane magnetic anisotropy. Our results demonstrate that the ground state of Mn$_3$Ge is described by the coexistence of a strong six-fold antichiral order and a weak ferromagnetic order induced by second-order spin anisotropy. △ Less

Submitted 17 November, 2021; v1 submitted 15 November, 2021; originally announced November 2021.

Radiative Pattern of Intralayer and Interlayer Excitons in Two-Dimensional WS2/WSe2 Heterostructure

Authors: Mohammed Adel Aly, Manan Shah, Lorenz Maximilian Schneider, Kyungnam Kang, Martin Koch, Eui-Hyeok Yang, Arash Rahimi-Iman

Abstract: Two-dimensional (2D) heterostructures (HS) formed by transition-metal dichalcogenide (TMDC) monolayers offer a unique platform for the study of intralayer and interlayer excitons as well as moiré-pattern-induced features. Particularly, the dipolar charge-transfer exciton comprising an electron and a hole, which are confined to separate layers of 2D semiconductors and Coulomb-bound across the heter… ▽ More Two-dimensional (2D) heterostructures (HS) formed by transition-metal dichalcogenide (TMDC) monolayers offer a unique platform for the study of intralayer and interlayer excitons as well as moiré-pattern-induced features. Particularly, the dipolar charge-transfer exciton comprising an electron and a hole, which are confined to separate layers of 2D semiconductors and Coulomb-bound across the heterojunction interface, has drawn considerable attention in the research community. On the one hand, it bears significance for optoelectronic devices, e.g. in terms of charge carrier extraction from photovoltaic devices. On the other hand, its spatially indirect nature and correspondingly high longevity among excitons as well as its out-of-plane dipole orientation render it attractive for excitonic Bose-Einstein condensation studies, which address collective coherence effects, and for photonic integration schemes with TMDCs. Here, we demonstrate the interlayer excitons' out-of-plane dipole orientation through angle-resolved spectroscopy of the HS photoluminescence at cryogenic temperatures, employing a tungsten-based TMDC HS. Within the measurable light cone, the directly-obtained radiation profile of this species clearly resembles that of an in-plane emitter which deviates from that of the intralayer bright excitons as well as the other excitonic HS features recently attributed to artificial superlattices formed by moiré patterns. △ Less

Submitted 12 November, 2021; originally announced November 2021.

Experiments conducted in the burning plasma regime with inertial fusion implosions

Authors: J. S. Ross, J. E. Ralph, A. B. Zylstra, A. L. Kritcher, H. F. Robey, C. V. Young, O. A. Hurricane, D. A. Callahan, K. L. Baker, D. T. Casey, T. Doeppner, L. Divol, M. Hohenberger, S. Le Pape, A. Pak, P. K. Patel, R. Tommasini, S. J. Ali, P. A. Amendt, L. J. Atherton, B. Bachmann, D. Bailey, L. R. Benedetti, L. Berzak Hopkins, R. Betti , et al. (127 additional authors not shown)

Abstract: An experimental program is currently underway at the National Ignition Facility (NIF) to compress deuterium and tritium (DT) fuel to densities and temperatures sufficient to achieve fusion and energy gain. The primary approach being investigated is indirect drive inertial confinement fusion (ICF), where a high-Z radiation cavity (a hohlraum) is heated by lasers, converting the incident energy into… ▽ More An experimental program is currently underway at the National Ignition Facility (NIF) to compress deuterium and tritium (DT) fuel to densities and temperatures sufficient to achieve fusion and energy gain. The primary approach being investigated is indirect drive inertial confinement fusion (ICF), where a high-Z radiation cavity (a hohlraum) is heated by lasers, converting the incident energy into x-ray radiation which in turn drives the DT fuel filled capsule causing it to implode. Previous experiments reported DT fuel gain exceeding unity [O.A. Hurricane et al., Nature 506, 343 (2014)] and then exceeding the kinetic energy of the imploding fuel [S. Le Pape et al., Phys. Rev. Lett. 120, 245003 (2018)]. We report on recent experiments that have achieved record fusion neutron yields on NIF, greater than 100 kJ with momentary fusion powers exceeding 1PW, and have for the first time entered the burning plasma regime where fusion alpha-heating of the fuel exceeds the energy delivered to the fuel via compression. This was accomplished by increasing the size of the high-density carbon (HDC) capsule, increasing energy coupling, while controlling symmetry and implosion design parameters. Two tactics were successful in controlling the radiation flux symmetry and therefore the implosion symmetry: transferring energy between laser cones via plasma waves, and changing the shape of the hohlraum. In conducting these experiments, we controlled for known sources of degradation. Herein we show how these experiments were performed to produce record performance, and demonstrate the data fidelity leading us to conclude that these shots have entered the burning plasma regime. △ Less

Submitted 8 November, 2021; originally announced November 2021.

Microstructure, grain boundary evolution and anisotropic Fe segregation in (0001) textured Ti thin films

Authors: Vivek Devulapalli, Marcus Hans, Prithiv T. Sukumar, Jochen M. Schneider, Gerhard Dehm, Christian H. Liebscher

Abstract: The structure and chemistry of grain boundaries (GBs) are crucial in determining polycrystalline materials' properties. Faceting and solute segregation to minimize the GB energy is a commonly observed phenomenon. In this paper, a deposition process to obtain pure tilt GBs in titanium (Ti) thin films is presented. By increasing the power density, a transition from polycrystalline film growth to a m… ▽ More The structure and chemistry of grain boundaries (GBs) are crucial in determining polycrystalline materials' properties. Faceting and solute segregation to minimize the GB energy is a commonly observed phenomenon. In this paper, a deposition process to obtain pure tilt GBs in titanium (Ti) thin films is presented. By increasing the power density, a transition from polycrystalline film growth to a maze bicrystalline Ti film on SrTiO$_3$ (001) substrate is triggered. All the GBs in the bicrystalline thin film are characterized to be $Σ$13 [0001] coincident site lattice (CSL) boundaries. The GB planes are seen to distinctly facet into symmetric {$\bar{7}520$} and asymmetric {$10\bar{1}0$} // {$11\bar{2}0$} segments of 20-50~nm length. Additionally, EDS reveals preferential segregation of iron (Fe) in every alternate symmetric {$\bar{7}520$} segment. Both the faceting and the segregation are explained by a difference in the CSL density between the facet planes. Furthermore, in the GB plane containing Fe segregation, atom probe tomography is used to experimentally determine the GB excess solute to be 1.25~atoms/nm$^{2}$. In summary, the study reveals for the first time a methodology to obtain bicrystalline Ti thin films with strong faceting and anisotropy in iron (Fe) segregation behaviour within the same family of planes. △ Less

Submitted 8 November, 2021; originally announced November 2021.

Comments: 13 pages, 9 figures

Non-equilibrium self-assembly of spin-wave solitons in FePt nanoparticles

Authors: D. Turenne, A. Yaroslavtsev, X. Wang, V. Unikandanuni, I. Vaskivskyi, M. Schneider, E. Jal, R. Carley, G. Mercurio, R. Gort, N. Agarwal, B. Van Kuiken, L. Mercadier, J. Schlappa, L. Le Guyader, N. Gerasimova, M. Teichmann, D. Lomidze, A. Castoldi, D. Potorochin, D. Mukkattukavil, J. Brock, N. Z. Hagström, A. H. Reid, X. Shen , et al. (14 additional authors not shown)

Abstract: Magnetic nanoparticles such as FePt in the L10-phase are the bedrock of our current data storage technology. As the grains become smaller to keep up with technological demands, the superparamagnetic limit calls for materials with higher magneto-crystalline anisotropy. This in turn reduces the magnetic exchange length to just a few nanometers enabling magnetic structures to be induced within the na… ▽ More Magnetic nanoparticles such as FePt in the L10-phase are the bedrock of our current data storage technology. As the grains become smaller to keep up with technological demands, the superparamagnetic limit calls for materials with higher magneto-crystalline anisotropy. This in turn reduces the magnetic exchange length to just a few nanometers enabling magnetic structures to be induced within the nanoparticles. Here we describe the existence of spin-wave solitons, dynamic localized bound states of spin-wave excitations, in FePt nanoparticles. We show with time-resolved X-ray diffraction and micromagnetic modeling that spin-wave solitons of sub-10 nm sizes form out of the demagnetized state following femtosecond laser excitation. The measured soliton spin-precession frequency of 0.1 THz positions this system as a platform to develop miniature devices capable of filling the THz gap. △ Less

Submitted 2 November, 2021; originally announced November 2021.

Comments: 32 pages, please check the "attachemnts" tab in the pdf file in order to see the movie

Stiffening attractive suspensions with solid inclusions or granularity effect in loaded colloidal gels

Authors: Claudia Ferreiro-Córdova, Giuseppe Foffi, Olivier Pitois, Chiara Guidolin, Maxime Schneider, Anniina Salonen

Abstract: The elastic properties of a soft matter material can be greatly altered by the presence of solid inclusions whose microscopic properties, such as their size and interactions, can have a dramatic effect. In order to shed light on these effects we use extensive rheology computer simulations to investigate colloidal gels with solid inclusions of different size. We show that the elastic properties var… ▽ More The elastic properties of a soft matter material can be greatly altered by the presence of solid inclusions whose microscopic properties, such as their size and interactions, can have a dramatic effect. In order to shed light on these effects we use extensive rheology computer simulations to investigate colloidal gels with solid inclusions of different size. We show that the elastic properties vary in a highly non trivial way as consequence of the interactions between the gel backbone and the inclusions. In particular, we show that the key aspects are the presence of the gel backbone and its mechanical alteration originated by the inclusions. To confirm our observations and their generality, we performed experiments on an emulsion that presents strong analogies with colloidal gels and confirms the trends observed in the simulations. △ Less

Submitted 30 October, 2021; originally announced November 2021.

The Hubbard model with fermionic tensor networks

Authors: Manuel Schneider, Johann Ostmeyer, Karl Jansen, Thomas Luu, Carsten Urbach

Abstract: Many electromagnetic properties of graphene can be described by the Hubbard model on a honeycomb lattice. However, this system suffers strongly from the sign problem if a chemical potential is included. Tensor network methods are not affected by this problem. We use the imaginary time evolution of a fermionic projected entangled pair state, which allows to simulate both parity sectors independentl… ▽ More Many electromagnetic properties of graphene can be described by the Hubbard model on a honeycomb lattice. However, this system suffers strongly from the sign problem if a chemical potential is included. Tensor network methods are not affected by this problem. We use the imaginary time evolution of a fermionic projected entangled pair state, which allows to simulate both parity sectors independently. Incorporating the fermionic nature on the level of the tensor network allows to fix the particle number to be either even or odd. This way we can access the states at half filling and with one additional electron. We calculate the energy and other observables of both states, which was not possible before with Monte Carlo methods. △ Less

Submitted 23 December, 2021; v1 submitted 28 October, 2021; originally announced October 2021.

Comments: Proceedings of the 38th International Symposium on Lattice Field Theory (Lattice 2021)

Emergent phenomena at oxide interfaces studied with standing-wave photoelectron spectroscopy

Authors: C. -T. Kuo, G. Conti, J. E. Rault, C. M. Schneider, S. Nemšák, A. X. Gray

Abstract: Emergent phenomena at complex-oxide interfaces have become a vibrant field of study in the past two decades due to the rich physics and a wide range of possibilities for creating new states of matter and novel functionalities for potential devices. Electronic-structural characterization of such phenomena presents a unique challenge due to the lack of direct yet non-destructive techniques for probi… ▽ More Emergent phenomena at complex-oxide interfaces have become a vibrant field of study in the past two decades due to the rich physics and a wide range of possibilities for creating new states of matter and novel functionalities for potential devices. Electronic-structural characterization of such phenomena presents a unique challenge due to the lack of direct yet non-destructive techniques for probing buried layers and interfaces with the required Angstrom-level resolution, as well as element and orbital specificity. In this review article, we survey several recent studies wherein soft x-ray standing-wave photoelectron spectroscopy, a relatively newly developed technique, is used to investigate buried oxide interfaces exhibiting emergent phenomena such as metal-insulator transition, interfacial ferromagnetism, and two-dimensional electron gas. Advantages, challenges, and future applications of this methodology are also discussed. △ Less

Submitted 27 October, 2021; originally announced October 2021.

Validation of point process predictions with proper scoring rules

Authors: Claudio Heinrich-Mertsching, Thordis L. Thorarinsdottir, Peter Guttorp, Max Schneider

Abstract: We introduce a class of proper scoring rules for evaluating spatial point process forecasts based on summary statistics. These scoring rules rely on Monte-Carlo approximations of expectations and can therefore easily be evaluated for any point process model that can be simulated. In this regard, they are more flexible than the commonly used logarithmic score and other existing proper scores for po… ▽ More We introduce a class of proper scoring rules for evaluating spatial point process forecasts based on summary statistics. These scoring rules rely on Monte-Carlo approximations of expectations and can therefore easily be evaluated for any point process model that can be simulated. In this regard, they are more flexible than the commonly used logarithmic score and other existing proper scores for point process predictions. The scoring rules allow for evaluating the calibration of a model to specific aspects of a point process, such as its spatial distribution or tendency towards clustering. Using simulations we analyze the sensitivity of our scoring rules to different aspects of the forecasts and compare it to the logarithmic score. Applications to earthquake occurrences in northern California, USA and the spatial distribution of Pacific silver firs in Findley Lake Reserve in Washington, USA highlight the usefulness of our scores for scientific model selection. △ Less

Submitted 2 November, 2021; v1 submitted 22 October, 2021; originally announced October 2021.

Rare Events via Cross-Entropy Population Monte Carlo

Authors: Caleb Miller, Jem N. Corcoran, Michael D. Schneider

Abstract: We present a Cross-Entropy based population Monte Carlo algorithm. This methods stands apart from previous work in that we are not optimizing a mixture distribution. Instead, we leverage deterministic mixture weights and optimize the distributions individually through a reinterpretation of the typical derivation of the cross-entropy method. Demonstrations on numerical examples show that the algori… ▽ More We present a Cross-Entropy based population Monte Carlo algorithm. This methods stands apart from previous work in that we are not optimizing a mixture distribution. Instead, we leverage deterministic mixture weights and optimize the distributions individually through a reinterpretation of the typical derivation of the cross-entropy method. Demonstrations on numerical examples show that the algorithm can outperform existing resampling population Monte Carlo methods, especially for higher-dimensional problems. △ Less

Submitted 11 October, 2021; originally announced October 2021.

$\textit{Ab initio}$-guided X-ray photoelectron spectroscopy quantification of Ti vacancies in Ti$_{1-δ}$O$_x$N$_{1-x}$ thin films

Authors: Pavel Ondračka, Marcus Hans, Damian M. Holzapfel, Daniel Primetzhofer, David Holec, Jochen M. Schneider

Abstract: $\textit{Ab initio}$ calculations were employed to investigate the effect of oxygen concentration dependent Ti vacancies formation on the core electron binding energy shifts in cubic titanium oxynitride (Ti$_{1-δ}$O$_x$N$_{1-x}$). It was shown, that the presence of a Ti vacancy reduces the 1s core electron binding energy of the first N neighbors by $\sim… ▽ More $\textit{Ab initio}$ calculations were employed to investigate the effect of oxygen concentration dependent Ti vacancies formation on the core electron binding energy shifts in cubic titanium oxynitride (Ti$_{1-δ}$O$_x$N$_{1-x}$). It was shown, that the presence of a Ti vacancy reduces the 1s core electron binding energy of the first N neighbors by $\sim$0.6 eV and that this effect is additive with respect to the number of vacancies. Hence it is predicted that the Ti vacancy concentration can be revealed from the intensity of the shifted components in the N 1s core spectra region. This notion was critically appraised by fitting the N 1s region obtained via X-ray photoelectron spectroscopy (XPS) measurements of Ti$_{1-δ}$O$_x$N$_{1-x}$ thin films deposited by high power pulsed magnetron sputtering. A model to quantify the Ti vacancy concentration based on the intensity ratio between the N 1s signal components, corresponding to N atoms with locally different Ti vacancy concentration, was developed. Herein a random vacancy distribution was assumed and the influence of surface oxidation from atmospheric exposure after deposition was considered. The so estimated vacancy concentrations are consistent with a model calculating the vacancy concentration based on the O concentrations determined by elastic recoil detection analysis and text book oxidation states and hence electroneutrality. Thus, we have unequivocally established that the formation and population of Ti vacancies in cubic Ti$_{1-δ}$O$_x$N$_{1-x}$ thin films can be quantified by XPS measurements from N 1s core electron binding energy shifts. △ Less

Submitted 22 October, 2021; v1 submitted 8 October, 2021; originally announced October 2021.

Towards Quantum Simulations in Particle Physics and Beyond on Noisy Intermediate-Scale Quantum Devices

Authors: Lena Funcke, Tobias Hartung, Karl Jansen, Stefan Kühn, Manuel Schneider, Paolo Stornati, Xiaoyang Wang

Abstract: We review two algorithmic advances that bring us closer to reliable quantum simulations of model systems in high energy physics and beyond on noisy intermediate-scale quantum (NISQ) devices. The first method is the dimensional expressivity analysis of quantum circuits, which allows for constructing minimal but maximally expressive quantum circuits. The second method is an efficient mitigation of r… ▽ More We review two algorithmic advances that bring us closer to reliable quantum simulations of model systems in high energy physics and beyond on noisy intermediate-scale quantum (NISQ) devices. The first method is the dimensional expressivity analysis of quantum circuits, which allows for constructing minimal but maximally expressive quantum circuits. The second method is an efficient mitigation of readout errors on quantum devices. Both methods can lead to significant improvements in quantum simulations, e.g., when variational quantum eigensolvers are used. △ Less

Submitted 7 October, 2021; originally announced October 2021.

Comments: 15 pages, 6 figures, invited manuscript for Philosophical Transactions of the Royal Society A

Report number: MIT-CTP/5325

An FE-DMN method for the multiscale analysis of thermomechanical composites

Authors: Sebastian Gajek, Matti Schneider, Thomas Böhlke

Abstract: We extend the FE-DMN method to fully coupled thermomechanical two-scale simulations of composite materials. In particular, every Gauss point of the macroscopic finite element model is equipped with a deep material network (DMN). Such a DMN serves as a high-fidelity surrogate model for full-field solutions on the microscopic scale of inelastic, non-isothermal constituents. Building on the homogeniz… ▽ More We extend the FE-DMN method to fully coupled thermomechanical two-scale simulations of composite materials. In particular, every Gauss point of the macroscopic finite element model is equipped with a deep material network (DMN). Such a DMN serves as a high-fidelity surrogate model for full-field solutions on the microscopic scale of inelastic, non-isothermal constituents. Building on the homogenization framework of Chatzigeorgiou et al. [Int. J. Plast, vol. 81, pp. 18--39, 2016], we extend the framework of DMNs to thermomechanical composites by incorporating the two-way thermomechanical coupling, i.e., the coupling from the macroscopic onto the microscopic scale and vice versa, into the framework. We provide details on the efficient implementation of our approach as a user-material subroutine (UMAT). We validate our approach on the microscopic scale and show that DMNs predict the effective stress, the effective dissipation and the change of the macroscopic absolute temperature with high accuracy. After validation, we demonstrate the capabilities of our approach on a concurrent thermomechanical two-scale simulation on the macroscopic component scale. △ Less

Submitted 29 November, 2021; v1 submitted 29 September, 2021; originally announced September 2021.

The Three-Dimensional Electronic Structure of LiFeAs: Strong-coupling Superconductivity and Topology in the Iron Pnictides

Authors: Ryan P. Day, MengXing Na, Manuel Zingl, Berend Zwartsenberg, Matteo Michiardi, Giorgio Levy, Michael Schneider, Doug Wong, Pinder Dosanjh, Tor M. Pedersen, Sergey Gorovikov, Shun Chi, Ruixing Liang, Walter N. Hardy, Douglas A. Bonn, Sergey Zhdanovich, Ilya S. Elfimov, Andrea Damascelli

Abstract: Amongst the iron-based superconductors, LiFeAs is unrivalled in the simplicity of its crystal structure and phase diagram. However, our understanding of this canonical compound suffers from conflict between mutually incompatible descriptions of the material's electronic structure, as derived from contradictory interpretations of the photoemission record. Here, we explore the challenge of interpret… ▽ More Amongst the iron-based superconductors, LiFeAs is unrivalled in the simplicity of its crystal structure and phase diagram. However, our understanding of this canonical compound suffers from conflict between mutually incompatible descriptions of the material's electronic structure, as derived from contradictory interpretations of the photoemission record. Here, we explore the challenge of interpretation in such experiments. By combining comprehensive photon energy- and polarization- dependent angle-resolved photoemission spectroscopy (ARPES) measurements with numerical simulations, we establish the providence of several contradictions in the present understanding of this and related materials. We identify a confluence of surface-related issues which have precluded unambiguous identification of both the number and dimensionality of the Fermi surface sheets. Ultimately, we arrive at a scenario which supports indications of topologically non-trivial states, while also being incompatible with superconductivity as a spin-fluctuation driven Fermi surface instability. △ Less

Submitted 27 September, 2021; originally announced September 2021.

Comments: 8 pages, 4 figures

Report number: Phys. Rev. B 105, 155142

Implementation and first results of the KM3NeT real-time core-collapse supernova neutrino search

Authors: KM3NeT Collaboration, S. Aiello, A. Albert, M. Alshamsi, S. Alves Garre, Z. Aly, A. Ambrosone, F. Ameli, M. Andre, G. Androulakis, M. Anghinolfi, M. Anguita, M. Ardid, S. Ardid, J. Aublin, C. Bagatelas, B. Baret, S. Basegmez du Pree, M. Bendahman, F. Benfenati, E. Berbee, A. M. van den Berg, V. Bertin, S. Biagi, M. Boettcher , et al. (220 additional authors not shown)

Abstract: The KM3NeT research infrastructure is under construction in the Mediterranean Sea. KM3NeT will study atmospheric and astrophysical neutrinos with two multi-purpose neutrino detectors, ARCA and ORCA, primarily aimed at GeV-PeV neutrinos. Thanks to the multi-photomultiplier tube design of the digital optical modules, KM3NeT is capable of detecting the neutrino burst from a Galactic or near-Galactic… ▽ More The KM3NeT research infrastructure is under construction in the Mediterranean Sea. KM3NeT will study atmospheric and astrophysical neutrinos with two multi-purpose neutrino detectors, ARCA and ORCA, primarily aimed at GeV-PeV neutrinos. Thanks to the multi-photomultiplier tube design of the digital optical modules, KM3NeT is capable of detecting the neutrino burst from a Galactic or near-Galactic core-collapse supernova. This potential is already exploitable with the first detection units deployed in the sea. This paper describes the real-time implementation of the supernova neutrino search, operating on the two KM3NeT detectors since the first months of 2019. A quasi-online astronomy analysis is introduced to study the time profile of the detected neutrinos for especially significant events. The mechanism of generation and distribution of alerts, as well as the integration into the SNEWS and SNEWS 2.0 global alert systems are described. The approach for the follow-up of external alerts with a search for a neutrino excess in the archival data is defined. Finally, an overview of the current detector capabilities and a report after the first two years of operation are given. △ Less

Submitted 7 December, 2021; v1 submitted 13 September, 2021; originally announced September 2021.

Comments: 19 pages, 9 figures

Journal ref: Eur. Phys. J. C 82, 317 (2022)

Variational methods for finding periodic orbits in the incompressible Navier-Stokes equations

Authors: Jeremy P Parker, Tobias M Schneider

Abstract: Unstable periodic orbits are believed to underpin the dynamics of turbulence, but by their nature are hard to find computationally. We present a family of methods to converge such unstable periodic orbits for the incompressible Navier-Stokes equations, based on variations of an integral objective functional, and using traditional gradient-based optimisation strategies. Different approaches for han… ▽ More Unstable periodic orbits are believed to underpin the dynamics of turbulence, but by their nature are hard to find computationally. We present a family of methods to converge such unstable periodic orbits for the incompressible Navier-Stokes equations, based on variations of an integral objective functional, and using traditional gradient-based optimisation strategies. Different approaches for handling the incompressibility condition are considered. The variational methods are applied to the specific case of periodic, two-dimensional Kolmogorov flow and compared against existing Newton iteration-based shooting methods. While computationally slow, our methods converge from very inaccurate initial guesses. △ Less

Submitted 4 April, 2022; v1 submitted 27 August, 2021; originally announced August 2021.

Early stages of dissolution corrosion in 316L and DIN 1.4970 austenitic stainless steels with and without anticorrosion coatings in static liquid lead-bismuth eutectic (LBE) at 500$^\circ$C

Authors: Evangelia Charalampopoulou, Konstantina Lambrinou, Tom Van der Donck, Boris Paladino, Fabio Di Fonzo, Clio Azina, Per Eklund, Stanislav Mráz, Jochen M. Schneider, Dominique Schryvers, Rémi Delville

Abstract: This work addresses the early stages ($\le$1000 h) of the dissolution corrosion behavior of 316L and DIN 1.4970 austenitic stainless steels in contact with oxygen-poor (C$_O$ < 10$^-$$^8$ mass%), static liquid lead-bismuth eutectic (LBE) at 500°C for 600-1000 h. The objective of this study was to determine the relative early-stage resistance of the uncoated steels to dissolution corrosion and to a… ▽ More This work addresses the early stages ($\le$1000 h) of the dissolution corrosion behavior of 316L and DIN 1.4970 austenitic stainless steels in contact with oxygen-poor (C$_O$ < 10$^-$$^8$ mass%), static liquid lead-bismuth eutectic (LBE) at 500°C for 600-1000 h. The objective of this study was to determine the relative early-stage resistance of the uncoated steels to dissolution corrosion and to assess the protectiveness of select candidate coatings (Cr$_2$AlC, Al$_2$O$_3$, V$_2$Al$_x$C$_y$). The simultaneous exposure of steels with intended differences in microstructure and thermomechanical state showed the effects of steel grain size, density of annealing/deformation twins, and secondary precipitates on the steel dissolution corrosion behavior. The findings of this study provide recommendations on steel manufacturing with the aim of using the steels to construct Gen-IV lead-cooled fast reactors. △ Less

Submitted 13 July, 2021; originally announced August 2021.

Comments: 52 pages, 22 figures, 4 tables

Journal ref: Materials Characterization, Volume 178, 2021, 111234

Near total reflection X-ray photoelectron spectroscopy: Quantifying chemistry at solid/liquid and solid/solid interfaces

Authors: Henrique P. Martins, Giuseppina Conti, Isvar Cordova, Lorenz Falling, Heath Kersell, Farhad Salmassi, Eric Gullikson, Inna Vishik, Christoph Baeumer, Patrick Naulleau, Claus M. Schneider, Slavomir Nemsak

Abstract: Near total reflection regime has been widely used in X-ray science, specifically in grazing incidence small angle X-ray scattering and in hard X-ray photoelectron spectroscopy. In this work, we introduce some practical aspects of using near total reflection in ambient pressure X-ray photoelectron spectroscopy and apply this technique to study chemical concentration gradients in a substrate/photore… ▽ More Near total reflection regime has been widely used in X-ray science, specifically in grazing incidence small angle X-ray scattering and in hard X-ray photoelectron spectroscopy. In this work, we introduce some practical aspects of using near total reflection in ambient pressure X-ray photoelectron spectroscopy and apply this technique to study chemical concentration gradients in a substrate/photoresist system. Experimental data are accompanied by X-ray optical and photoemission simulations to quantitatively probe the photoresist and the interface with the depth accuracy of ~1 nm. Together, our calculations and experiments confirm that near total reflection X-ray photoelectron spectroscopy is a suitable method to extract information from buried interfaces with highest depth-resolution, which can help address open research questions regarding our understanding of concentration profiles, electrical gradients, and charge transfer phenomena at such interfaces. The presented methodology is especially attractive for solid/liquid interface studies, since it provides all the strengths of a Bragg-reflection standing-wave spectroscopy without the need of an artificial multilayer mirror serving as a standing wave generator, thus dramatically simplifying the sample synthesis. △ Less

Submitted 13 August, 2021; originally announced August 2021.

Comments: 13 pages, 4 figures Supplemental Information

Combined sensitivity of JUNO and KM3NeT/ORCA to the neutrino mass ordering

Authors: KM3NeT Collaboration, S. Aiello, A. Albert, M. Alshamsi, S. Alves Garre, Z. Aly, A. Ambrosone, F. Ameli, M. Andre, G. Androulakis, M. Anghinolfi, M. Anguita, M. Ardid, S. Ardid, J. Aublin, C. Bagatelas, B. Baret, S. Basegmez du Pree, M. Bendahman, F. Benfenati, E. Berbee, A. M. van den Berg, V. Bertin, S. Biagi, M. Boettcher , et al. (253 additional authors not shown)

Abstract: This article presents the potential of a combined analysis of the JUNO and KM3NeT/ORCA experiments to determine the neutrino mass ordering. This combination is particularly interesting as it significantly boosts the potential of either detector, beyond simply adding their neutrino mass ordering sensitivities, by removing a degeneracy in the determination of $Δm_{31}^2$ between the two experiments… ▽ More This article presents the potential of a combined analysis of the JUNO and KM3NeT/ORCA experiments to determine the neutrino mass ordering. This combination is particularly interesting as it significantly boosts the potential of either detector, beyond simply adding their neutrino mass ordering sensitivities, by removing a degeneracy in the determination of $Δm_{31}^2$ between the two experiments when assuming the wrong ordering. The study is based on the latest projected performances for JUNO, and on simulation tools using a full Monte Carlo approach to the KM3NeT/ORCA response with a careful assessment of its energy systematics. From this analysis, a $5σ$ determination of the neutrino mass ordering is expected after 6 years of joint data taking for any value of the oscillation parameters. This sensitivity would be achieved after only 2 years of joint data taking assuming the current global best-fit values for those parameters for normal ordering. △ Less

Submitted 13 August, 2021; originally announced August 2021.

Comments: 24 pages, 9 figures

Journal ref: JHEP 03 (2022) 055

Orbital contributions in the element-resolved valence electronic structure of Bi2Se3

Authors: Cheng-Tai Kuo, Shih-Chieh Lin, Jean-Pascal Rueff, Zhesheng Chen, Irene Aguilera, Gustav Bihlmayer, Lukasz Plucinski, Ismael L. Graff, Giuseppina Conti, Ivan A. Vartanyants, Claus M. Schneider, Charles S. Fadley

Abstract: In this work, we studied the bulk band structure of a topological insulator (TI) Bi2Se3 and determined the contributions of the Bi and Se orbital states to the valence bands using standing wave-excited hard x-ray photoemission spectroscopy (SW-HAXPES). This SW technique can provide the element-resolved information and extract individual Bi and Se contributions to the Bi2Se3 valence band. Compariso… ▽ More In this work, we studied the bulk band structure of a topological insulator (TI) Bi2Se3 and determined the contributions of the Bi and Se orbital states to the valence bands using standing wave-excited hard x-ray photoemission spectroscopy (SW-HAXPES). This SW technique can provide the element-resolved information and extract individual Bi and Se contributions to the Bi2Se3 valence band. Comparisons with density functional theory (DFT) calculations (LDA and GW) reveal that the Bi 6s, Bi 6p, and Se 4p states are dominant in the Bi2Se3 HAXPES valence band. These findings pave a way for studying the element-resolved band structure and orbital contributions of this class of TIs. △ Less

Submitted 7 December, 2021; v1 submitted 3 August, 2021; originally announced August 2021.

Comments: 22 pages, 5 figures

New submonolayer copper telluride phase on Cu(111) -- ad-chain and trough formation

Authors: Lutz Hammer, Tilman Kißlinger, M. Alexander Schneider

Abstract: We present a so far undetected submonolayer phase of copper telluride on Cu(111) with $\left(5 \times \sqrt{3}\right)_{\text{rect}}$ periodicity and coverage of 0.40 ML Tellurium (Te), which can be grown with perfect long-range order. It is structurally characterized by a combination of quantitative low-energy electron diffraction (LEED-IV), scanning tunneling microscopy (STM), and density functio… ▽ More We present a so far undetected submonolayer phase of copper telluride on Cu(111) with $\left(5 \times \sqrt{3}\right)_{\text{rect}}$ periodicity and coverage of 0.40 ML Tellurium (Te), which can be grown with perfect long-range order. It is structurally characterized by a combination of quantitative low-energy electron diffraction (LEED-IV), scanning tunneling microscopy (STM), and density functional theory (DFT). We find that Te induces the formation of four atom wide linear troughs within the Cu(111) surface filled up by two Te atoms per unit cell. Additionally, the interspace between the troughs is decorated by Cu$_2$Te$_2$ ad-chains sitting at hcp sites. All Te atoms exhibit the same local sixfold coordination: They occupy threefold hollow sites of the substrate and are one-sided attached to another three Cu atoms. The presented structural model is verified by a LEED-IV analysis with Pendry R-factor of R = 0.174 and quantitative agreement of structural parameters with DFT predictions. It also has by far the lowest energy of all models tested by DFT and simulated STM images agree perfectly with experiment. It turns out that the new $\left(5 \times \sqrt{3}\right)_{\text{rect}}$ phase is the most dense surface telluride phase possible on Cu(111) before bulk-like copper telluride starts to growth. △ Less

Submitted 27 July, 2021; originally announced July 2021.

Gaussian Process Classification for Galaxy Blend Identification in LSST

Authors: James J. Buchanan, Michael D. Schneider, Robert E. Armstrong, Amanda L. Muyskens, Benjamin W. Priest, Ryan J. Dana

Abstract: A significant fraction of observed galaxies in the Rubin Observatory Legacy Survey of Space and Time (LSST) will overlap at least one other galaxy along the same line of sight, in a so-called "blend." The current standard method of assessing blend likelihood in LSST images relies on counting up the number of intensity peaks in the smoothed image of a blend candidate, but the reliability of this pr… ▽ More A significant fraction of observed galaxies in the Rubin Observatory Legacy Survey of Space and Time (LSST) will overlap at least one other galaxy along the same line of sight, in a so-called "blend." The current standard method of assessing blend likelihood in LSST images relies on counting up the number of intensity peaks in the smoothed image of a blend candidate, but the reliability of this procedure has not yet been comprehensively studied. Here we construct a realistic distribution of blended and unblended galaxies through high-fidelity simulations of LSST-like images, and from this we examine the blend classification accuracy of the standard peak-finding method. Furthermore, we develop a novel Gaussian process blend classifier model, and show that this classifier is competitive with both the peak-finding method as well as with a convolutional neural network model. Finally, whereas the peak-finding method does not naturally assign probabilities to its classification estimates, the Gaussian process model does, and we show that the Gaussian process classification probabilities are generally reliable. △ Less

Submitted 10 December, 2021; v1 submitted 19 July, 2021; originally announced July 2021.

Comments: 20 pages, 6 figures, version accepted by ApJ

Probing the Big Bang with quantum fields

Authors: Abhay Ashtekar, Tommaso De Lorenzo, Marc Schneider

Abstract: By carrying out a systematic investigation of linear, test quantum fields $\hatφ(x)$ in cosmological space-times, we show that $\hatφ(x)$ remain well-defined across the big bang as operator valued distributions in a large class of Friedmann, Lemaître, Robertson, Walker space-times, including radiation and dust filled universes. In particular, the expectation values… ▽ More By carrying out a systematic investigation of linear, test quantum fields $\hatφ(x)$ in cosmological space-times, we show that $\hatφ(x)$ remain well-defined across the big bang as operator valued distributions in a large class of Friedmann, Lemaître, Robertson, Walker space-times, including radiation and dust filled universes. In particular, the expectation values $\langle \hatφ(x)\,\hatφ(x')\rangle$ are well-defined bi-distributions in the extended space-time in spite of the big bang singularity. Interestingly, correlations between fields evaluated at spatially and temporally separated points exhibit an asymmetry that is reminiscent of the Belinskii, Khalatnikov, Lifshitz behavior. The renormalized products of fields $\langle \hatφ^2(x)\rangle_{\rm ren}$ and $\langle \hat{T}_{ab}(x) \rangle_{\rm ren}$ also remain well-defined as distributions. Conformal coupling is not necessary for these considerations to hold. Thus, when probed with observables associated with quantum fields, the big bang (and the big crunch) singularities are quite harmless. △ Less

Submitted 1 October, 2021; v1 submitted 18 July, 2021; originally announced July 2021.

Comments: 38 pages; Three small clarifications added and minor typos corrected. Version to appear in Advances in Mathematical and Theoretical Physics

Journal ref: Advances in Theoretical and Mathematical Physics, 25, 7, 1651-1702 (2021)

Independent and coherent transitions between antiferromagnetic states of few-molecule systems

Authors: Claire Besson, Philipp Stegmann, Michael Schnee, Zeila Zanolli, Simona Achilli, Nils Wittemeier, Asmus Vierck, Robert Frielinghaus, Paul Kögerler, Janina Maultzsch, Pablo Ordejón, Claus M. Schneider, Alfred Hucht, Jürgen König, Carola Meyer

Abstract: Spin-electronic devices are poised to become part of mainstream microelectronic technology .Downsizing them, however, faces the intrinsic difficulty that as ferromagnets become smaller, it becomes more difficult to stabilize their magnetic moment. Antiferromagnets are much more stable, and thus research on antiferromagnetic spintronics has developed into a fast-growing field. Here, we provide proo… ▽ More Spin-electronic devices are poised to become part of mainstream microelectronic technology .Downsizing them, however, faces the intrinsic difficulty that as ferromagnets become smaller, it becomes more difficult to stabilize their magnetic moment. Antiferromagnets are much more stable, and thus research on antiferromagnetic spintronics has developed into a fast-growing field. Here, we provide proof of concept data that allows us to expand the area of antiferromagnetic spintronics to the hitherto elusive level of individual molecules. In contrast to all previous work on molecular spintronics, our detection scheme of the molecule's spin state does not rely on a magnetic moment. Instead, we use field-effect transistor devices constituting of an isolated, contacted single-wall carbon nanotube covalently bound to a limited number of molecular antiferromagnets incorporating four Mn(II) or Co(II) ions. Time-dependent quantum transport measurement along the functionalized nanotube show step-like transitions between several distinct current levels, which we attribute to transitions between different antiferromagnetic states of individual molecular complexes grafted on the nanotube. A statistical analysis of the switching events using factorial cumulants indicates that the cobalt complexes switch independently from each other, while a coherent superposition of the antiferromagnetic spin states of the molecules along the nanotube is observed for the manganese complexes. The long coherence time (several seconds at 100 mK) is made possible by the absence of spin and orbital momentum in the relevant states of the manganese complex, while the cobalt complex includes a significant orbital momentum contribution due to the pseudo-octahedral d$^7$ metal centers. △ Less

Submitted 21 June, 2023; v1 submitted 16 July, 2021; originally announced July 2021.

Comments: including supplementary information

Journal ref: Physical Review B, vol 107, 2023, 245414

Best-approximation error for parametric quantum circuits

Authors: Lena Funcke, Tobias Hartung, Karl Jansen, Stefan Kühn, Manuel Schneider, Paolo Stornati

Abstract: In Variational Quantum Simulations, the construction of a suitable parametric quantum circuit is subject to two counteracting effects. The number of parameters should be small for the device noise to be manageable, but also large enough for the circuit to be able to represent the solution. Dimensional expressivity analysis can optimize a candidate circuit considering both aspects. In this article,… ▽ More In Variational Quantum Simulations, the construction of a suitable parametric quantum circuit is subject to two counteracting effects. The number of parameters should be small for the device noise to be manageable, but also large enough for the circuit to be able to represent the solution. Dimensional expressivity analysis can optimize a candidate circuit considering both aspects. In this article, we will first discuss an inductive construction for such candidate circuits. Furthermore, it is sometimes necessary to choose a circuit with fewer parameters than necessary to represent all relevant states. To characterize such circuits, we estimate the best-approximation error using Voronoi diagrams. Moreover, we discuss a hybrid quantum-classical algorithm to estimate the worst-case best-approximation error, its complexity, and its scaling in state space dimensionality. This allows us to identify some obstacles for variational quantum simulations with local optimizers and underparametrized circuits, and we discuss possible remedies. △ Less

Submitted 15 July, 2021; originally announced July 2021.

Comments: accepted at 2021 IEEE International Conference on Web Services (ICWS), Special Track: Quantum Software and Services

Travelling Wakefield Tube: THz Source Powered by Nonrelativistic Electron Beam

Authors: Mitchell E. Schneider, Emily Jevarjian, Ben Sims, Alexander Altmark, Bas van der Geer, Sergey V. Baryshev

Abstract: High peak power, tunable, narrowband terahertz emitters are becoming sought after given their portability, efficiency, and ability to be deployed in the field for industrial, medical, and military applications. The use of accelerator systems producing THz frequencies via Cherenkov radiation, generated by passing an electron beam through a slow-wave wakefield structure, is a promising method to mee… ▽ More High peak power, tunable, narrowband terahertz emitters are becoming sought after given their portability, efficiency, and ability to be deployed in the field for industrial, medical, and military applications. The use of accelerator systems producing THz frequencies via Cherenkov radiation, generated by passing an electron beam through a slow-wave wakefield structure, is a promising method to meet future THz requirements. To date, efforts have been dedicated to analysis and design of sources utilizing laser seeded bunched electron beam drivers with relativistic energies beyond 5 MeV. Presented here is a wakefield THz generation scheme based on passing a long quasi-dc nonrelativistic beam (200 keV) through a dielectric loaded travelling wave structure. Reduced energy allows for compactness and portability of the accelerator as the size and weight of the dielectric slow wave structure is vanishingly small compared to the accelerator unit. The presented scheme can serve as a tunable high peak power THz source operated between 0.4-1.6 THz and produces power gain by a factor of five with an average efficiency of 6.8\%. △ Less

Submitted 6 July, 2021; originally announced July 2021.

TeV emission of Galactic plane sources with HAWC and H.E.S.S

Authors: H. Abdalla, F. Aharonian, F. Ait Benkhali, E. O. Angüner, C. Arcaro, C. Armand, T. Armstrong, H. Ashkar, M. Backes, V. Baghmanyan, V. Barbosa Martins, A. Barnacka, M. Barnard, Y. Becherini, D. Berge, K. Bernlöhr, B. Bi, M. Böttcher, C. Boisson, J. Bolmont, M. de Bony de Lavergne, M. Breuhaus, R. Brose, F. Brun, P. Brun , et al. (299 additional authors not shown)

Abstract: The High Altitude Water Cherenkov (HAWC) observatory and the High Energy Stereoscopic System (H.E.S.S.) are two leading instruments in the ground-based very-high-energy gamma-ray domain. HAWC employs the water Cherenkov detection (WCD) technique, while H.E.S.S. is an array of Imaging Atmospheric Cherenkov Telescopes (IACTs). The two facilities therefore differ in multiple aspects, including their… ▽ More The High Altitude Water Cherenkov (HAWC) observatory and the High Energy Stereoscopic System (H.E.S.S.) are two leading instruments in the ground-based very-high-energy gamma-ray domain. HAWC employs the water Cherenkov detection (WCD) technique, while H.E.S.S. is an array of Imaging Atmospheric Cherenkov Telescopes (IACTs). The two facilities therefore differ in multiple aspects, including their observation strategy, the size of their field of view and their angular resolution, leading to different analysis approaches. Until now, it has been unclear if the results of observations by both types of instruments are consistent: several of the recently discovered HAWC sources have been followed up by IACTs, resulting in a confirmed detection only in a minority of cases. With this paper, we go further and try to resolve the tensions between previous results by performing a new analysis of the H.E.S.S. Galactic plane survey data, applying an analysis technique comparable between H.E.S.S. and HAWC. Events above 1 TeV are selected for both datasets, the point spread function of H.E.S.S. is broadened to approach that of HAWC, and a similar background estimation method is used. This is the first detailed comparison of the Galactic plane observed by both instruments. H.E.S.S. can confirm the gamma-ray emission of four HAWC sources among seven previously undetected by IACTs, while the three others have measured fluxes below the sensitivity of the H.E.S.S. dataset. Remaining differences in the overall gamma-ray flux can be explained by the systematic uncertainties. Therefore, we confirm a consistent view of the gamma-ray sky between WCD and IACT techniques. △ Less

Submitted 8 September, 2021; v1 submitted 3 July, 2021; originally announced July 2021.

Sensitivity to light sterile neutrino mixing parameters with KM3NeT/ORCA

Authors: S. Aiello, A. Albert, M. Alshamsi, S. Alves Garre, Z. Aly, A. Ambrosone, F. Ameli, M. Andre, G. Androulakis, M. Anghinolfi, M. Anguita, G. Anton, M. Ardid, S. Ardid, J. Aublin, C. Bagatelas, B. Baret, S. Basegmez du Pree, M. Bendahman, F. Benfenati, E. Berbee, A. M. van den Berg, V. Bertin, S. Biagi, M. Bissinger , et al. (223 additional authors not shown)

Abstract: KM3NeT/ORCA is a next-generation neutrino telescope optimised for atmospheric neutrino oscillations studies. In this paper, the sensitivity of ORCA to the presence of a light sterile neutrino in a 3+1 model is presented. After three years of data taking, ORCA will be able to probe the active-sterile mixing angles $θ_{14}$, $θ_{24}$, $θ_{34}$ and the effective angle $θ_{μe}$, over a broad range of… ▽ More KM3NeT/ORCA is a next-generation neutrino telescope optimised for atmospheric neutrino oscillations studies. In this paper, the sensitivity of ORCA to the presence of a light sterile neutrino in a 3+1 model is presented. After three years of data taking, ORCA will be able to probe the active-sterile mixing angles $θ_{14}$, $θ_{24}$, $θ_{34}$ and the effective angle $θ_{μe}$, over a broad range of mass squared difference $Δm^2_{41} \sim [10^{-5}, 10]$ $\rm{eV}^2$, allowing to test the eV-mass sterile neutrino hypothesis as the origin of short baseline anomalies, as well as probing the hypothesis of a very light sterile neutrino, not yet constrained by cosmology. ORCA will be able to explore a relevant fraction of the parameter space not yet reached by present measurements. △ Less

Submitted 23 November, 2021; v1 submitted 1 July, 2021; originally announced July 2021.

Protecting Time Series Data with Minimal Forecast Loss

Authors: Matthew J. Schneider, **wook Lee

Abstract: Forecasting could be negatively impacted due to anonymization requirements in data protection legislation. To measure the potential severity of this problem, we derive theoretical bounds for the loss to forecasts from additive exponential smoothing models using protected data. Following the guidelines of anonymization from the General Data Protection Regulation (GDPR) and California Consumer Priva… ▽ More Forecasting could be negatively impacted due to anonymization requirements in data protection legislation. To measure the potential severity of this problem, we derive theoretical bounds for the loss to forecasts from additive exponential smoothing models using protected data. Following the guidelines of anonymization from the General Data Protection Regulation (GDPR) and California Consumer Privacy Act (CCPA), we develop the $k$-nearest Time Series ($k$-nTS) Swap** and $k$-means Time Series ($k$-mTS) Shuffling methods to create protected time series data that minimizes the loss to forecasts while preventing a data intruder from detecting privacy issues. For efficient and effective decision making, we formally model an integer programming problem for a perfect matching for simultaneous data swap** in each cluster. We call it a two-party data privacy framework since our optimization model includes the utilities of a data provider and data intruder. We apply our data protection methods to thousands of time series and find that it maintains the forecasts and patterns (level, trend, and seasonality) of time series well compared to standard data protection methods suggested in legislation. Substantively, our paper addresses the challenge of protecting time series data when used for forecasting. Our findings suggest the managerial importance of incorporating the concerns of forecasters into the data protection itself. △ Less

Submitted 7 March, 2023; v1 submitted 30 June, 2021; originally announced June 2021.

Comments: found better results

Spanning Fermi arcs in a two-dimensional magnet

Authors: Ying-Jiun Chen, Jan-Philipp Hanke, Markus Hoffmann, Gustav Bihlmayer, Yuriy Mokrousov, Stefan Blügel, Claus M. Schneider, Christian Tusche

Abstract: The discovery of topological states of matter has led to a revolution in materials research. When external or intrinsic parameters break certain symmetries, global properties of topological materials change drastically. A paramount example is the emergence of Weyl nodes under broken inversion symmetry, acting like magnetic monopoles in momentum space. However, while a rich variety of non-trivial q… ▽ More The discovery of topological states of matter has led to a revolution in materials research. When external or intrinsic parameters break certain symmetries, global properties of topological materials change drastically. A paramount example is the emergence of Weyl nodes under broken inversion symmetry, acting like magnetic monopoles in momentum space. However, while a rich variety of non-trivial quantum phases could in principle also originate from broken time-reversal symmetry, realizing systems that combine magnetism with complex topological properties is remarkably elusive due to both considerable experimental and theoretical challenges. Here, we demonstrate that giant open Fermi arcs are created at the surface of ultrathin hybrid magnets. The Fermi-surface topology of an atomically thin ferromagnet is substantially modified by the hybridization with a heavy-metal substrate, giving rise to Fermi-surface discontinuities that are bridged by the Fermi arcs. Due to the interplay between magnetism and topology, we can control both the shape and the location of the Fermi arcs by tuning the magnetization direction. The hybridization points in the Fermi surface can be attributed to a non-trivial "mixed" topology and induce hot spots in the Berry curvature, dominating spin and charge transport as well as magneto-electric coupling effects. △ Less

Submitted 29 June, 2021; originally announced June 2021.

Comments: 14 pages, 10 figures

Stabilization of a nonlinear bullet coexisting with a Bose-Einstein condensate in a rapidly cooled magnonic system driven by a spin-orbit torque

Authors: Michael Schneider, David Breitbach, Rostyslav O. Serha, Qi Wang, Morteza Mohseni, Alexander A. Serga, Andrei N. Slavin, Vasyl S. Tiberkevich, Björn Heinz, Thomas Brächer, Bert Lägel, Carsten Dubs, Sebastian Knauer, Oleksandr V. Dobrovolskiy, Philipp Pirro, Burkard Hillebrands, Andrii V. Chumak

Abstract: We have recently shown that injection of magnons into a magnetic dielectric via the spin-orbit torque (SOT) effect in the adjacent layer of a heavy metal subjected to the action of short (0.1 $μ$s) current pulses allows for control of a magnon Bose-Einstein Condensate (BEC). Here, the BEC was formed in the process of rapid cooling (RC), when the electric current heating the sample is abruptly term… ▽ More We have recently shown that injection of magnons into a magnetic dielectric via the spin-orbit torque (SOT) effect in the adjacent layer of a heavy metal subjected to the action of short (0.1 $μ$s) current pulses allows for control of a magnon Bose-Einstein Condensate (BEC). Here, the BEC was formed in the process of rapid cooling (RC), when the electric current heating the sample is abruptly terminated. In the present study, we show that the application of a longer (1.0 $μ$s) electric current pulse triggers the formation of a nonlinear localized magnonic bullet below the linear magnon spectrum. After pulse termination, the magnon BEC, as before, is formed at the bottom of the linear spectrum, but the nonlinear bullet continues to exist, stabilized for additional 30 ns by the same process of RC-induced magnon condensation. Our results suggest that a stimulated condensation of excess magnons to all highly populated magnonic states occurs. △ Less

Submitted 28 June, 2021; originally announced June 2021.

Journal ref: Physical Review B 104, L140405 (2021)

A Surrogate-Assisted Uncertainty-Aware Bayesian Validation Framework and its Application to Coupling Free Flow and Porous-Medium Flow

Authors: Farid Mohammadi, Elissa Eggenweiler, Bernd Flemisch, Sergey Oladyshkin, Iryna Rybak, Martin Schneider, Kilian Weishaupt

Abstract: Existing model validation studies in geoscience often disregard or partly account for uncertainties in observations, model choices, and input parameters. In this work, we develop a statistical framework that incorporates a probabilistic modeling technique using a fully Bayesian approach to perform a quantitative uncertainty-aware validation. A Bayesian perspective on a validation task yields an op… ▽ More Existing model validation studies in geoscience often disregard or partly account for uncertainties in observations, model choices, and input parameters. In this work, we develop a statistical framework that incorporates a probabilistic modeling technique using a fully Bayesian approach to perform a quantitative uncertainty-aware validation. A Bayesian perspective on a validation task yields an optimal bias-variance trade-off against the reference data. It provides an integrative metric for model validation that incorporates parameter and conceptual uncertainty. Additionally, a surrogate modeling technique, namely Bayesian Sparse Polynomial Chaos Expansion, is employed to accelerate the computationally demanding Bayesian calibration and validation. We apply this validation framework to perform a comparative evaluation of models for coupling a free flow with a porous-medium flow. The correct choice of interface conditions and proper model parameters for such coupled flow systems is crucial for physically consistent modeling and accurate numerical simulations of applications. We develop a benchmark scenario that uses the Stokes equations to describe the free flow and considers different models for the porous-medium compartment and the coupling at the fluid--porous interface. These models include a porous-medium model using Darcy's law at the representative elementary volume scale with classical or generalized interface conditions and a pore-network model with its related coupling approach. We study the coupled flow problems' behaviors considering a benchmark case, where a pore-scale resolved model provides the reference solution. With the suggested framework, we perform sensitivity analysis, quantify the parametric uncertainties, demonstrate each model's predictive capabilities, and make a probabilistic model comparison. △ Less

Submitted 14 June, 2022; v1 submitted 25 June, 2021; originally announced June 2021.

MSC Class: 65C20; 62F15; 65C05; 35Q35; 76D07; 76M12; 76S05

Simulating both parity sectors of the Hubbard Model with Tensor Networks

Authors: Manuel Schneider, Johann Ostmeyer, Karl Jansen, Thomas Luu, Carsten Urbach

Abstract: Tensor networks are a powerful tool to simulate a variety of different physical models, including those that suffer from the sign problem in Monte Carlo simulations. The Hubbard model on the honeycomb lattice with non-zero chemical potential is one such problem. Our method is based on projected entangled pair states (PEPS) using imaginary time evolution. We demonstrate that it provides accurate es… ▽ More Tensor networks are a powerful tool to simulate a variety of different physical models, including those that suffer from the sign problem in Monte Carlo simulations. The Hubbard model on the honeycomb lattice with non-zero chemical potential is one such problem. Our method is based on projected entangled pair states (PEPS) using imaginary time evolution. We demonstrate that it provides accurate estimators for the ground state of the model, including cases where Monte Carlo simulations fail miserably. In particular it shows near to optimal, that is linear, scaling in lattice size. We also present a novel approach to directly simulate the subspace with an odd number of fermions. It allows to independently determine the ground state in both sectors. Without a chemical potential this corresponds to half filling and the lowest energy state with one additional electron or hole. We identify several stability issues, such as degenerate ground states and large single particle gaps, and provide possible fixes. △ Less

Submitted 2 July, 2021; v1 submitted 24 June, 2021; originally announced June 2021.

Comments: 20 pages, 20 figures

ACM Class: J.2

Journal ref: Phys. Rev. B 104 (2021) 155118

Parametric generation of spin waves in nano-scaled magnonic conduits

Authors: Björn Heinz, Morteza Mohseni, Akira Lentfert, Roman Verba, Michael Schneider, Bert Lägel, Khrystyna Levchenko, Thomas Brächer, Carsten Dubs, Andrii V. Chumak, Philipp Pirro

Abstract: The research feld of magnonics proposes a low-energy wave-logic computation technology based on spin waves to complement the established CMOS technology and provide a basis for emerging unconventional computation architectures. However, magnetic dam** is a limiting factor for all-magnonic logic circuits and multi-device networks, ultimately rendering mechanisms to effciently manipulate and ampli… ▽ More The research feld of magnonics proposes a low-energy wave-logic computation technology based on spin waves to complement the established CMOS technology and provide a basis for emerging unconventional computation architectures. However, magnetic dam** is a limiting factor for all-magnonic logic circuits and multi-device networks, ultimately rendering mechanisms to effciently manipulate and amplify spin waves a necessity. In this regard, parallel pum** is a versatile tool since it allows to selectively generate and amplify spin waves. While extensively studied in microscopic systems, nano-scaled systems are lacking investigation to assess the feasibility and potential future use of parallel pum** in magnonics. Here, we investigate a longitudinally magnetized 100 nm-wide magnonic nano-conduit using space and time-resolved micro-focused Brillouin-light-scattering spectroscopy. Employing parallel pum** to generate spin waves, we observe that the non-resonant excitation of dipolar spin waves is favored over the resonant excitation of short wavelength exchange spin waves. In addition, we utilize this technique to access the effective spin-wave relaxation time of an individual nano-conduit, observing a large relaxation time up to (115.0 +- 7.6) ns. Despite the significant decrease of the pum** effciency in the investigated nano-conduit, a reasonably small threshold is found rendering parallel pum** feasible on the nano-scale. △ Less

Submitted 15 January, 2022; v1 submitted 20 June, 2021; originally announced June 2021.

EuroCrops: A Pan-European Dataset for Time Series Crop Type Classification

Authors: Maja Schneider, Amelie Broszeit, Marco Körner

Abstract: We present EuroCrops, a dataset based on self-declared field annotations for training and evaluating methods for crop type classification and map**, together with its process of acquisition and harmonisation. By this, we aim to enrich the research efforts and discussion for data-driven land cover classification via Earth observation and remote sensing. Additionally, through inclusion of self-dec… ▽ More We present EuroCrops, a dataset based on self-declared field annotations for training and evaluating methods for crop type classification and map**, together with its process of acquisition and harmonisation. By this, we aim to enrich the research efforts and discussion for data-driven land cover classification via Earth observation and remote sensing. Additionally, through inclusion of self-declarations gathered in the scope of subsidy control from all countries of the European Union (EU), this dataset highlights the difficulties and pitfalls one comes across when operating on a transnational level. We, therefore, also introduce a new taxonomy scheme, HCAT-ID, that aspires to capture all the aspects of reference data originating from administrative and agency databases. To address researchers from both the remote sensing and the computer vision and machine learning communities, we publish the dataset in different formats and processing levels. △ Less

Submitted 14 June, 2021; originally announced June 2021.

Comments: 4 pages, website: https://www.eurocrops.tum.de/

Journal ref: Proc. of the 2021 conference on Big Data from Space (BiDS21), 2021, 5, 125-128

Coherent control of a symmetry-engineered multi-qubit dark state in waveguide quantum electrodynamics

Authors: Maximilian Zanner, Tuure Orell, Christian M. F. Schneider, Romain Albert, Stefan Oleschko, Mathieu L. Juan, Matti Silveri, Gerhard Kirchmair

Abstract: Quantum information is typically encoded in the state of a qubit that is decoupled from the environment. In contrast, waveguide quantum electrodynamics studies qubits coupled to a mode continuum, exposing them to a loss channel and causing quantum information to be lost before coherent operations can be performed. Here we restore coherence by realizing a dark state that exploits symmetry propertie… ▽ More Quantum information is typically encoded in the state of a qubit that is decoupled from the environment. In contrast, waveguide quantum electrodynamics studies qubits coupled to a mode continuum, exposing them to a loss channel and causing quantum information to be lost before coherent operations can be performed. Here we restore coherence by realizing a dark state that exploits symmetry properties and interactions between four qubits. Dark states decouple from the waveguide and are thus a valuable resource for quantum information but also come with a challenge: they cannot be controlled by the waveguide drive. We overcome this problem by designing a drive that utilizes the symmetry properties of the collective state manifold allowing us to selectively drive both bright and dark states. The decay time of the dark state exceeds that of the waveguide-limited single qubit by more than two orders of magnitude. Spectroscopy on the second excitation manifold provides further insight into the level structure of the hybridized system. Our experiment paves the way for implementations of quantum many-body physics in waveguides and the realization of quantum information protocols using decoherence-free subspaces. △ Less

Submitted 10 June, 2021; originally announced June 2021.

Comments: main paper: 8 pages, 4 figures supplementary material: 10 pages, 7 figures, 1 table

Nonlinear mixed-dimension model for embedded tubular networks with application to root water uptake

Authors: Timo Koch, Hanchuan Wu, Martin Schneider

Abstract: We present a numerical scheme for the solution of nonlinear mixed-dimensional PDEs describing coupled processes in embedded tubular network system in exchange with a bulk domain. Such problems arise in various biological and technical applications such as in the modeling of root-water uptake, heat exchangers, or geothermal wells. The nonlinearity appears in form of solution-dependent parameters su… ▽ More We present a numerical scheme for the solution of nonlinear mixed-dimensional PDEs describing coupled processes in embedded tubular network system in exchange with a bulk domain. Such problems arise in various biological and technical applications such as in the modeling of root-water uptake, heat exchangers, or geothermal wells. The nonlinearity appears in form of solution-dependent parameters such as pressure-dependent permeability or temperature-dependent thermal conductivity. We derive and analyse a numerical scheme based on distributing the bulk-network coupling source term by a smoothing kernel with local support. By the use of local analytical solutions, interface unknowns and fluxes at the bulk-network interface can be accurately reconstructed from coarsely resolved numerical solutions in the bulk domain. Numerical examples give confidence in the robustness of the method and show the results in comparison to previously published methods. The new method outperforms these existing methods in accuracy and efficiency. In a root water uptake scenario, we accurately estimate the transpiration rate using only a few thousand 3D mesh cells and a structured cube grid whereas other state-of-the-art numerical schemes require millions of cells and local grid refinement to reach comparable accuracy. △ Less

Submitted 14 June, 2021; v1 submitted 9 June, 2021; originally announced June 2021.

Comments: 34 pages, 16 figures

MSC Class: 76Z99

Long-term spectra of the blazars Mrk 421 and Mrk 501 at TeV energies seen by HAWC

Authors: A. Albert, R. Alfaro, C. Alvarez, J. R. Angeles Camacho, J. C. Arteaga-Velázquez, K. P. Arunbabu, D. Avila Rojas, H. A. Ayala Solares, V. Baghmanyan, Belmont-Moreno, K. S. Caballero-Mora, T. Capistrán, A. Carramiñana, S. Casanova, U. Cotti, J. Cotzomi, S. Coutiño de León, E. De la Fuente, R. Diaz Hernandez, M. A. DuVernois, M. Durocher, J. C. Díaz-Vélez, K. Engel, C. Espinoza, K. L. Fan , et al. (53 additional authors not shown)

Abstract: The High Altitude Water Cherenkov (HAWC) Gamma-Ray Observatory surveys the very high energy sky in the 300 GeV to $>100$ TeV energy range. HAWC has detected two blazars above $11σ$, Markarian 421 (Mrk 421) and Markarian 501 (Mrk 501). The observations are comprised of data taken in the period between June 2015 and July 2018, resulting in a $\sim 1038$ days of exposure. In this work we report the t… ▽ More The High Altitude Water Cherenkov (HAWC) Gamma-Ray Observatory surveys the very high energy sky in the 300 GeV to $>100$ TeV energy range. HAWC has detected two blazars above $11σ$, Markarian 421 (Mrk 421) and Markarian 501 (Mrk 501). The observations are comprised of data taken in the period between June 2015 and July 2018, resulting in a $\sim 1038$ days of exposure. In this work we report the time-averaged spectral analysis for both sources above 0.5 TeV. Taking into account the flux attenuation due to the extragalactic background light (EBL), the intrinsic spectrum of Mrk 421 is described by a power law with an exponential energy cut-off with index $α=2.26\pm(0.12)_{stat}(_{-0.2}^{+0.17})_{sys}$ and energy cut-off $E_c=5.1\pm(1.6)_{stat}(_{-2.5}^{+1.4})_{sys}$ TeV, while the intrinsic spectrum of Mrk 501 is better described by a simple power law with index $α=2.61\pm(0.11)_{stat}(_{-0.07}^{+0.01})_{sys}$. The maximum energies at which the Mrk 421 and Mrk 501 signals are detected are 9 and 12 TeV, respectively. This makes these some of the highest energy detections to date for spectra averaged over years-long timescales. Since the observation of gamma radiation from blazars provides information about the physical processes that take place in their relativistic jets, it is important to study the broad-band spectral energy distribution (SED) of these objects. To this purpose, contemporaneous data in the gamma-ray band to X-ray range, and literature data in the radio to UV range, were used to build time-averaged SEDs that were modeled within a synchrotron self-Compton leptonic scenario. △ Less

Submitted 4 February, 2022; v1 submitted 7 June, 2021; originally announced June 2021.

Comments: 16 pages, 5 tables, 9 figures

Towards Million-Server Network Simulations on Just a Laptop

Authors: Maciej Besta, Marcel Schneider, Salvatore Di Girolamo, Ankit Singla, Torsten Hoefler

Abstract: The growing size of data center and HPC networks pose unprecedented requirements on the scalability of simulation infrastructure. The ability to simulate such large-scale interconnects on a simple PC would facilitate research efforts. Unfortunately, as we first show in this work, existing shared-memory packet-level simulators do not scale to the sizes of the largest networks considered today. We t… ▽ More The growing size of data center and HPC networks pose unprecedented requirements on the scalability of simulation infrastructure. The ability to simulate such large-scale interconnects on a simple PC would facilitate research efforts. Unfortunately, as we first show in this work, existing shared-memory packet-level simulators do not scale to the sizes of the largest networks considered today. We then illustrate a feasibility analysis and a set of enhancements that enable a simple packet-level htsim simulator to scale to the unprecedented simulation sizes on a single PC. Our code is available online and can be used to design novel schemes in the coming era of omnipresent data centers and HPC clusters. △ Less

Submitted 26 May, 2021; originally announced May 2021.

Extremely low energy ARPES of quantum well states in cubic-GaN/AlN and GaAs/GaAlAs heterostructures

Authors: Mahdi Hajlaoui, Stefano Ponzoni, Michael Deppe, Tobias Henksmeier, Donat Josef As, Dirk Reuter, Thomas Zentgraf, Claus Michael Schneider, Mirko Cinchetti

Abstract: Quantum well (QW) heterostructures have been extensively used for the realization of a wide range of optical and electronic devices. Exploiting their potential for further improvement and development requires a fundamental understanding of their electronic structure. So far, the most commonly used experimental techniques for this purpose have been all-optical spectroscopy methods that, however, ar… ▽ More Quantum well (QW) heterostructures have been extensively used for the realization of a wide range of optical and electronic devices. Exploiting their potential for further improvement and development requires a fundamental understanding of their electronic structure. So far, the most commonly used experimental techniques for this purpose have been all-optical spectroscopy methods that, however, are generally averaged in momentum space. Additional information can be gained by angle-resolved photoelectron spectroscopy (ARPES), which measures the electronic structure with momentum resolution. Here we report on the use of extremely low energy ARPES (photon energy $\sim$ 7 eV) to increase its depth sensitivity and access buried QW states, located at 3 nm and 6 nm below the surface of cubic-GaN/AlN and GaAs/AlGaAs heterostructures, respectively. We find that the QW states in cubic-GaN/AlN can indeed be observed, but not their energy dispersion because of the high surface roughness. The GaAs/AlGaAs QW states, on the other hand, are buried too deep to be detected by extremely low energy ARPES. Since the sample surface is much flatter, the ARPES spectra of the GaAs/AlGaAs show distinct features in momentum space, which can be reconducted to the band structure of the topmost surface layer of the QW structure. Our results provide important information about the samples' properties required to perform extremely low energy ARPES experiments on electronic states buried in semiconductor heterostructures. △ Less

Submitted 11 May, 2021; originally announced May 2021.

Star-Galaxy Image Separation with Computationally Efficient Gaussian Process Classification

Authors: Amanda L. Muyskens, Imène R. Goumiri, Benjamin W. Priest, Michael D. Schneider, Robert E. Armstrong, Jason M. Bernstein, Ryan Dana

Abstract: We introduce a novel method for discerning optical telescope images of stars from those of galaxies using Gaussian processes (GPs). Although applications of GPs often struggle in high-dimensional data modalities such as optical image classification, we show that a low-dimensional embedding of images into a metric space defined by the principal components of the data suffices to produce high-qualit… ▽ More We introduce a novel method for discerning optical telescope images of stars from those of galaxies using Gaussian processes (GPs). Although applications of GPs often struggle in high-dimensional data modalities such as optical image classification, we show that a low-dimensional embedding of images into a metric space defined by the principal components of the data suffices to produce high-quality predictions from real large-scale survey data. We develop a novel method of GP classification hyperparameter training that scales approximately linearly in the number of image observations, which allows for application of GP models to large-size Hyper Suprime-Cam (HSC) Subaru Strategic Program data. In our experiments we evaluate the performance of a principal component analysis (PCA) embedded GP predictive model against other machine learning algorithms including a convolutional neural network and an image photometric morphology discriminator. Our analysis shows that our methods compare favorably with current methods in optical image classification while producing posterior distributions from the GP regression that can be used to quantify object classification uncertainty. We further describe how classification uncertainty can be used to efficiently parse large-scale survey imaging data to produce high-confidence object catalogs. △ Less

Submitted 3 May, 2021; originally announced May 2021.

Comments: 18 pages, 8 figures