-
Single Atom Plasmonic Switch
Authors:
Alexandros Emboras,
Jens Niegemann,
** Ma,
Christian Haffner,
Mathieu Luisier,
Christian Hafner,
Thomas Schimmel,
Juerg Leuthold
Abstract:
The atom sets an ultimate scaling limit to Moores law in the electronics industry. And while electronics research already explores atomic scales devices, photonics research still deals with devices at the micrometer scale. Here we demonstrate that photonic scaling-similar to electronics-is only limited by the atom. More precisely, we introduce an electrically controlled single atom plasmonic switc…
▽ More
The atom sets an ultimate scaling limit to Moores law in the electronics industry. And while electronics research already explores atomic scales devices, photonics research still deals with devices at the micrometer scale. Here we demonstrate that photonic scaling-similar to electronics-is only limited by the atom. More precisely, we introduce an electrically controlled single atom plasmonic switch. The switch allows for fast and reproducible switching by means of the relocation of an individual or at most -- a few atoms in a plasmonic cavity. Depending on the location of the atom either of two distinct plasmonic cavity resonance states are supported. Experimental results show reversible digital optical switching with an extinction ration of 10 dB and operation at room temperature with femtojoule (fJ) power consumption for a single switch operation. This demonstration of a CMOS compatible, integrated quantum device allowing to control photons at the single-atom level opens intriguing perspectives for a fully integrated and highly scalable chip platform -- a platform where optics, electronics and memory may be controlled at the single-atom level.
△ Less
Submitted 5 December, 2018; v1 submitted 31 August, 2015;
originally announced August 2015.
-
High speed nanotribology with quartz crystal resonators via Atomic Force Microscopy
Authors:
Fengzhen Zhang,
Othmar Marti,
Stefan Walheim,
Thomas Schimmel
Abstract:
Friction measurements in the range of several meters per second are still of great interests. With the atomic force microscopy (AFM), the oscilaltion situation of the quartz crystal resonators of 3MHz resonance frequency are studied. And the oscillation speed could reach up to several m/s. Then the friction measurements are carried out on the Fischer Pattern, which is prepared on the quartz crysta…
▽ More
Friction measurements in the range of several meters per second are still of great interests. With the atomic force microscopy (AFM), the oscilaltion situation of the quartz crystal resonators of 3MHz resonance frequency are studied. And the oscillation speed could reach up to several m/s. Then the friction measurements are carried out on the Fischer Pattern, which is prepared on the quartz crystal resonator. In this article, we present how to measure the oscillation speeds of the quartz crystal resonator and the friction measurements under different designs. Calibration method and the calculation methods are also discussed in details. Although there are errors in the AFM measurements due to the setup itself and the oscillating quartz which could highly affect the sharpness of the cantilever tip, the results indicate that the local friction coefficients with oscillation are higher than that without oscillation.
△ Less
Submitted 10 December, 2013;
originally announced December 2013.
-
Interaction of Epithelial Cells with Surfaces and Surfaces Decorated by Molecules
Authors:
Daniele Martini,
Othmar Marti,
Michael Beil,
T. Paust,
C. Huang,
M. Moosmann,
J. **,
T. Heiler,
R. Gröger,
Thomas Schimmel,
Stefan Walheim
Abstract:
A detailed understanding of the interface between living cells and substrate materials is of rising importance in many fields of medicine, biology and biotechnology. Cells at interfaces often form epithelia. The physical barrier that they form is one of their main functions. It is governed by the properties of the networks forming the cytoskeleton systems and by cell-to-cell contacts. Different su…
▽ More
A detailed understanding of the interface between living cells and substrate materials is of rising importance in many fields of medicine, biology and biotechnology. Cells at interfaces often form epithelia. The physical barrier that they form is one of their main functions. It is governed by the properties of the networks forming the cytoskeleton systems and by cell-to-cell contacts. Different substrates with varying surface properties modify the migration velocity of the cells. On the one hand one can change the materials composition. Organic and inorganic materials induce differing migration velocities in the same cell system. Within the same class of materials, a change of the surface stiffness or of the surface energy modifies the migration velocity, too. For our cell adhesion studies a variety of different, homogeneous substrates were used (polymers, bio-polymers, metals, oxides). In addition, an effective lithographic method, Polymer Blend Lithography (PBL), is reported, to produce patterned Self-Assembled Monolayers (SAM) on solid substrates featuring two or three different chemical functionalities. This we achieve without the use of conventional lithography like e-beam or UV lithography, only by using self-organization. These surfaces are decorated with a Teflon-like and with an amino-functionalized molecular layer. The resulting pattern is a copy of a previously created self-organized polymer pattern, featuring a scalable lateral domain size in the sub-micron range down below 100 nanometers. The resulting monolayer pattern features a high chemical and biofunctional contrast with feature sizes in the range of cell adhesion complexes like e.g. focal adhesion points.
△ Less
Submitted 2 March, 2013;
originally announced March 2013.
-
Conductance of Atomic-Sized Lead Contacts in an Electrochemical Environment
Authors:
F. -Q. Xie,
F. Hüser,
F. Pauly,
Ch. Obermair,
G. Schön,
Th. Schimmel
Abstract:
Atomic-sized lead (Pb) contacts are deposited and dissolved in an electrochemical environment, and their transport properties are measured. Due to the electrochemical fabrication process, we obtain mechanically unstrained contacts and conductance histograms with sharply resolved, individual peaks. Charge transport calculations based on density functional theory (DFT) for various ideal Pb contact…
▽ More
Atomic-sized lead (Pb) contacts are deposited and dissolved in an electrochemical environment, and their transport properties are measured. Due to the electrochemical fabrication process, we obtain mechanically unstrained contacts and conductance histograms with sharply resolved, individual peaks. Charge transport calculations based on density functional theory (DFT) for various ideal Pb contact geometries are in good agreement with the experimental results. Depending on the atomic configuration, single-atom-wide contacts of one and the same metal yield very different conductance values.
△ Less
Submitted 23 February, 2010;
originally announced February 2010.
-
Independently switchable atomic quantum transistors by reversible contact reconstruction
Authors:
F. -Q. Xie,
R. Maul,
A. Augenstein,
Ch. Obermair,
E. B. Starikov,
G. Schoen,
Th. Schimmel,
W. Wenzel
Abstract:
The controlled fabrication of actively switchable atomic-scale devices, in particular transistors, has remained elusive to date. Here we explain operation of an atomic-scale three-terminal device by a novel switching mechanism of bistable, self-stabilizing reconstruction of the electrode contacts at the atomic level: While the device is manufactured by electrochemical deposition, it operates ent…
▽ More
The controlled fabrication of actively switchable atomic-scale devices, in particular transistors, has remained elusive to date. Here we explain operation of an atomic-scale three-terminal device by a novel switching mechanism of bistable, self-stabilizing reconstruction of the electrode contacts at the atomic level: While the device is manufactured by electrochemical deposition, it operates entirely on the basis of mechanical effects of the solid-liquid interface. We analyze mechanically and thermally stable metallic junctions with a predefined quantized conductance of 1-5 G_0 in experiment and atomistic simulation. Atomistic modeling of structural and conductance properties elucidates bistable electrode reconstruction as the underlying mechanism of the device. Independent room-temperature operation of two transistors at low voltage demonstrates intriguing perspectives for quantum electronics and logics on the atomic scale.
△ Less
Submitted 6 April, 2009;
originally announced April 2009.
-
Pre-selectable integer quantum conductance of electrochemically fabricated silver point contacts
Authors:
F. -Q. Xie,
R. Maul,
S. Brendelberger,
Ch. Obermair,
E. B. Starikov,
W. Wenzel,
G. Schoen,
Th. Schimmel
Abstract:
The controlled fabrication of well-ordered atomic-scale metallic contacts is of great interest: it is expected that the experimentally observed high percentage of point contacts with a conductance at non-integer multiples of the conductance quantum G_0 = 2e^2/h in simple metals is correlated to defects resulting from the fabrication process. Here we demonstrate a combined electrochemical deposit…
▽ More
The controlled fabrication of well-ordered atomic-scale metallic contacts is of great interest: it is expected that the experimentally observed high percentage of point contacts with a conductance at non-integer multiples of the conductance quantum G_0 = 2e^2/h in simple metals is correlated to defects resulting from the fabrication process. Here we demonstrate a combined electrochemical deposition and annealing method which allows the controlled fabrication of point contacts with pre-selectable integer quantum conductance. The resulting conductance measurements on silver point contacts are compared with tight-binding-like conductance calculations of modeled idealized junction geometries between two silver crystals with a predefined number of contact atoms.
△ Less
Submitted 24 July, 2008;
originally announced July 2008.
-
Thermally Assisted Flux Flow in MgB2 : Strong Magnetic Field Dependence of the Activation Energy
Authors:
A. Sidorenko,
V. Zdravkov,
V. Ryazanov,
S. Horn,
S. Klimm,
R. Tidecks,
A. Wixforth,
Th. Koch,
Th. Schimmel
Abstract:
The origin of the resistive transition broadening for MgB2 thin films was investigated. Thermally activated flux flow is found to be responsible for the resistivity contribution in the vicinity of Tc. The origin of the observed extraordinary strong magnetic field dependence of the activation energy of the flux motion is discussed.
The origin of the resistive transition broadening for MgB2 thin films was investigated. Thermally activated flux flow is found to be responsible for the resistivity contribution in the vicinity of Tc. The origin of the observed extraordinary strong magnetic field dependence of the activation energy of the flux motion is discussed.
△ Less
Submitted 2 June, 2004;
originally announced June 2004.
-
Stochastic analysis of different rough surfaces
Authors:
M. Waechter,
F. Riess,
Th. Schimmel,
U. Wendt,
J. Peinke
Abstract:
This paper shows in detail the application of a new stochastic approach for the characterization of surface height profiles, which is based on the theory of Markov processes. With this analysis we achieve a characterization of the scale dependent complexity of surface roughness by means of a Fokker-Planck or Langevin equation, providing the complete stochastic information of multiscale joint pro…
▽ More
This paper shows in detail the application of a new stochastic approach for the characterization of surface height profiles, which is based on the theory of Markov processes. With this analysis we achieve a characterization of the scale dependent complexity of surface roughness by means of a Fokker-Planck or Langevin equation, providing the complete stochastic information of multiscale joint probabilities. The method is applied to several surfaces with different properties, for the purpose of showing the utility of this method in more details. In particular we show the evidence of Markov properties, and we estimate the parameters of the Fokker-Planck equation by pure, parameter-free data analysis. The resulting Fokker-Planck equations are verified by numerical reconstruction of conditional probability density functions. The results are compared with those from the analysis of multi-affine and extended multi-affine scaling properties which is often used for surface topographies. The different surface structures analysed here show in details advantages and disadvantages of these methods.
△ Less
Submitted 30 November, 2004; v1 submitted 5 April, 2004;
originally announced April 2004.
