-
FPGA-based residual amplitude modulation suppression and control for compact atomic clocks
Authors:
Tin Nghia Nguyen,
Thomas R. Schibli
Abstract:
We designed an FPGA fabric to provide phase modulation techniques to lock lasers to optical frequency references. The method incorporates an active residual-amplitude-modulation (RAM) suppression scheme that relies on complex modulation. All the required servos to construct an optical atomic clock are incorporated onto the same low-cost, commercial FPGA chip. We demonstrate a reliable, long-term R…
▽ More
We designed an FPGA fabric to provide phase modulation techniques to lock lasers to optical frequency references. The method incorporates an active residual-amplitude-modulation (RAM) suppression scheme that relies on complex modulation. All the required servos to construct an optical atomic clock are incorporated onto the same low-cost, commercial FPGA chip. We demonstrate a reliable, long-term RAM suppression 60 dB with the remaining RAM level at -100 dBc and an improved stability of three decades when applied on a two-photon rubidium clock.
△ Less
Submitted 31 October, 2023;
originally announced November 2023.
-
Optical and microwave metrology at the 10-18 level with an Er/Yb:glass frequency comb
Authors:
Nicholas V. Nardelli,
Holly Leopardi,
Thomas R. Schibli,
Tara M. Fortier
Abstract:
Optical frequency combs are an essential tool for precision metrology experiments ranging in application from remote spectroscopic sensing of trace gases to the characterization and comparison of optical atomic clocks for precision time-kee** and searches for physics beyond the standard model. Here we describe the architecture and fully characterize a telecom-band, self-modelocking frequency com…
▽ More
Optical frequency combs are an essential tool for precision metrology experiments ranging in application from remote spectroscopic sensing of trace gases to the characterization and comparison of optical atomic clocks for precision time-kee** and searches for physics beyond the standard model. Here we describe the architecture and fully characterize a telecom-band, self-modelocking frequency comb based on a free-space laser with an Er/Yb co-doped glass gain medium. The laser provides a robust and cost-effective alternative to Er:fiber laser based frequency combs, while offering stability and noise performance similar to Ti:sapphire laser systems. Finally, we demonstrate the Er/Yb:glass frequency comb's utility in high-stability frequency synthesis using two ultra-stable optical references at 1157 nm and 1070 nm and in low-noise photonic microwave generation by dividing these references to the microwave domain.
△ Less
Submitted 26 August, 2022;
originally announced August 2022.
-
Temperature shift suppression scheme for two-photon two-color rubidium vapor clocks
Authors:
Tin Nghia Nguyen,
Thomas R. Schibli
Abstract:
We propose a new scheme for interrogating a warm rubidium vapor using two different clock lasers. Performance-wise, this approach is distinctly different from the recently proposed two-color two-photon rubidium clocks as our scheme does not trade off the AC Stark suppression against an increased sensitivity to the cell-temperature/pressure. Instead, our approach compensates all, the AC-Stark shift…
▽ More
We propose a new scheme for interrogating a warm rubidium vapor using two different clock lasers. Performance-wise, this approach is distinctly different from the recently proposed two-color two-photon rubidium clocks as our scheme does not trade off the AC Stark suppression against an increased sensitivity to the cell-temperature/pressure. Instead, our approach compensates all, the AC-Stark shift and the temperature & pressure-induced frequency shifts. The proposed scheme also makes use of the modulation transfer technique, which enables a two-orders of magnitude increase in the signal-to-noise ratio compared to traditional clocks that rely on fluorescence measurements.
△ Less
Submitted 11 July, 2022;
originally announced July 2022.
-
10 GHz Generation with Ultra-Low Phase Noise via the Transfer Oscillator Technique
Authors:
Nicholas V. Nardelli,
Tara M. Fortier,
Marco Pomponio,
Esther Baumann,
Craig Nelson,
Thomas R. Schibli,
Archita Hati
Abstract:
Coherent frequency division of high-stability optical sources permits the extraction of microwave signals with ultra-low phase noise, enabling their application to systems with stringent timing precision. To date, the highest performance systems have required tight phase stabilization of laboratory grade optical frequency combs to Fabry-Perot optical reference cavities for faithful optical-to-micr…
▽ More
Coherent frequency division of high-stability optical sources permits the extraction of microwave signals with ultra-low phase noise, enabling their application to systems with stringent timing precision. To date, the highest performance systems have required tight phase stabilization of laboratory grade optical frequency combs to Fabry-Perot optical reference cavities for faithful optical-to-microwave frequency division. This requirement limits the technology to highly-controlled laboratory environments. Here, we employ a transfer oscillator technique, which employs digital and RF analog electronics to coherently suppress additive optical frequency comb noise. This relaxes the stabilization requirements and allows for the extraction of multiple independent microwave outputs from a single comb, while at the same time, permitting low-noise microwave generation from combs with higher noise profiles. Using this method we transferred the phase stability of two high-Finesse optical sources at 1157 nm and 1070 nm to two independent 10 GHz signals using a single frequency comb. We demonstrated absolute phase noise below -106 dBc/Hz at 1-Hz from carrier with corresponding 1 second fractional frequency instability below $2\times10^{-15}$. Finally, the latter phase noise levels were attainable for comb linewidths broadened up to 2 MHz, demonstrating the potential for out-of lab use with low SWaP lasers.
△ Less
Submitted 1 October, 2021;
originally announced October 2021.
-
Phase meter based on zero-crossing counting of digitized signals
Authors:
Wataru Kokuyama,
Hideaki Nozato,
Thomas R. Schibli
Abstract:
We developed a compact and easy-to-use phase meter based on a zero-crossing counting algorithm for digitized signals. Owing to the algorithm, the phase meter has low-noise and wide dynamic range. Low-noise differential phase measurements can be done for square waves (-204 $\mathrm{dBrad^{2}/Hz}$ for a 1-kHz, 1-$\mathrm{V_{p-p}}$ signal, 10 Hz-1 kHz offset, with cross-correlation) as well as sinuso…
▽ More
We developed a compact and easy-to-use phase meter based on a zero-crossing counting algorithm for digitized signals. Owing to the algorithm, the phase meter has low-noise and wide dynamic range. Low-noise differential phase measurements can be done for square waves (-204 $\mathrm{dBrad^{2}/Hz}$ for a 1-kHz, 1-$\mathrm{V_{p-p}}$ signal, 10 Hz-1 kHz offset, with cross-correlation) as well as sinusoidal waves, with a measurement error of $<1 \times 10^{-4}$ rad. We also demonstrated a direct phase measurement of an optical-beat note from a free-running laser over 10 decades (0.25 mHz-10 MHz) with a wide dynamic range of ~280 dB at 0.25 mHz. The phase meter can be an alternative for conventional phase meters and frequency counters in wide range of experiments.
△ Less
Submitted 17 September, 2020; v1 submitted 2 September, 2020;
originally announced September 2020.
-
Low-noise 750-MHz spaced Yb:fiber frequency combs
Authors:
Yuxuan Ma,
Bo Xu,
Hirotaka Ishii,
Fei Meng,
Yoshiaki Nakajima,
Isao Matsushima,
Thomas R. Schibli,
Zhigang Zhang,
Kaoru Minoshima
Abstract:
We demonstrate two fully and tightly phase locked 750 MHz ytterbium (Yb) fiber frequency combs that are independently stabilized to a continuous wave (CW) laser with <1 rad RMS phase error. A bulk EOM and a single stack PZT are separately utilized as the fast actuators for cavity length stabilization. The carrier envelop frequencies are phase locked by single loop feedback to laser diode current,…
▽ More
We demonstrate two fully and tightly phase locked 750 MHz ytterbium (Yb) fiber frequency combs that are independently stabilized to a continuous wave (CW) laser with <1 rad RMS phase error. A bulk EOM and a single stack PZT are separately utilized as the fast actuators for cavity length stabilization. The carrier envelop frequencies are phase locked by single loop feedback to laser diode current, showing 1.6 MHz servo bumps. The in-loop fractional frequency instabilities are ~1.5e-18 at 1s for both combs. To the best of our knowledge, this is the highest repetition rate in fiber based low phase noise combs tightly locked to optical frequency reference.
△ Less
Submitted 25 May, 2018;
originally announced May 2018.
-
Spatial distribution clam** of discrete spatial solitons due to three photon absorption in AlGaAs waveguide arrays
Authors:
Darren D. Hudson,
J. Nathan Kutz,
Thomas R. Schibli,
Demetrios N. Christodoulides,
Roberto Morandotti,
Steven T. Cundiff
Abstract:
We observe clam** of the output spatial light distribution of a waveguide array. Using a chirped pulse amplifier we reach peak intensities in the waveguides of ~24 GW/cm2. At this level, three photon absorption in the AlGaAs material clamps the discrete spatial soliton to a set distribution. Further increase in intensity does not change the distribution.
We observe clam** of the output spatial light distribution of a waveguide array. Using a chirped pulse amplifier we reach peak intensities in the waveguides of ~24 GW/cm2. At this level, three photon absorption in the AlGaAs material clamps the discrete spatial soliton to a set distribution. Further increase in intensity does not change the distribution.
△ Less
Submitted 28 November, 2011;
originally announced November 2011.
-
Ultra-Short Optical Pulse Generation with Single-Layer Graphene
Authors:
C. -C. Lee,
G. Acosta,
J. S. Bunch,
T. R. Schibli
Abstract:
Pulses as short as 260 fs have been generated in a diode-pumped low-gain Er:Yb:glass laser by exploiting the nonlinear optical response of single-layer graphene. The application of this novel material to solid-state bulk lasers opens up a way to compact and robust lasers with ultrahigh repetition rates.
Pulses as short as 260 fs have been generated in a diode-pumped low-gain Er:Yb:glass laser by exploiting the nonlinear optical response of single-layer graphene. The application of this novel material to solid-state bulk lasers opens up a way to compact and robust lasers with ultrahigh repetition rates.
△ Less
Submitted 28 October, 2010; v1 submitted 5 October, 2010;
originally announced October 2010.
-
VUV frequency combs from below-threshold harmonics
Authors:
Dylan C. Yost,
Thomas R. Schibli,
Jun Ye,
Jennifer L. Tate,
James Hostetter,
Kenneth J. Schafer,
Mette B. Gaarde
Abstract:
Recent demonstrations of high-harmonic generation (HHG) at very high repetition frequencies (~100 MHz) may allow for the revolutionary transfer of frequency combs to the vacuum ultraviolet (VUV). This advance necessitates unifying optical frequency comb technology with strong-field atomic physics. While strong-field studies of HHG have often focused on above-threshold harmonic generation (photon…
▽ More
Recent demonstrations of high-harmonic generation (HHG) at very high repetition frequencies (~100 MHz) may allow for the revolutionary transfer of frequency combs to the vacuum ultraviolet (VUV). This advance necessitates unifying optical frequency comb technology with strong-field atomic physics. While strong-field studies of HHG have often focused on above-threshold harmonic generation (photon energy above the ionization potential), for VUV frequency combs an understanding of below-threshold harmonic orders and their generation process is crucial. Here we present a new and quantitative study of the harmonics 7-13 generated below and near the ionization threshold in xenon gas. We show multiple generation pathways for these harmonics that are manifested as on-axis interference in the harmonic yield. This discovery provides a new understanding of the strong-field, below-threshold dynamics under the influence of an atomic potential and allows us to quantitatively assess the achievable coherence of a VUV frequency comb generated through below threshold harmonics. We find that under reasonable experimental conditions temporal coherence is maintained. As evidence we present the first explicit VUV frequency comb structure beyond the 3rd harmonic.
△ Less
Submitted 6 August, 2009; v1 submitted 23 January, 2009;
originally announced January 2009.
-
Testing ultrafast mode-locking at microhertz relative optical linewidth
Authors:
Michael J. Martin,
Seth M. Foreman,
T. R. Schibli,
Jun Ye
Abstract:
We report new limits on the phase coherence of the ultrafast mode-locking process in an octave-spanning Ti:sapphire comb. We find that the mode-locking mechanism correlates optical phase across a full optical octave with less than 2.5 micro Hz relative linewidth. This result is at least two orders of magnitude below recent predictions for quantum-limited individual comb-mode linewidths, verifyin…
▽ More
We report new limits on the phase coherence of the ultrafast mode-locking process in an octave-spanning Ti:sapphire comb. We find that the mode-locking mechanism correlates optical phase across a full optical octave with less than 2.5 micro Hz relative linewidth. This result is at least two orders of magnitude below recent predictions for quantum-limited individual comb-mode linewidths, verifying that the mode-locking mechanism strongly correlates quantum noise across the comb spectrum.
△ Less
Submitted 22 January, 2009; v1 submitted 25 October, 2008;
originally announced October 2008.
-
Nonlinear Femtosecond Pulse Resha** in Waveguide Arrays
Authors:
Darren D. Hudson,
Kimberlee Shish,
Thomas R. Schibli,
J. Nathan Kutz,
Demetrios N. Christodoulides,
Roberto Morandotti,
Steven T. Cundiff
Abstract:
We observe nonlinear pulse resha** of femtosecond pulses in a waveguide array due to coupling between waveguides. Amplified pulses from a mode-locked fiber laser are coupled to an AlGaAs core waveguide array structure. The observed power-dependent pulse resha** agrees with theory, including shortening of the pulse in the central waveguide.
We observe nonlinear pulse resha** of femtosecond pulses in a waveguide array due to coupling between waveguides. Amplified pulses from a mode-locked fiber laser are coupled to an AlGaAs core waveguide array structure. The observed power-dependent pulse resha** agrees with theory, including shortening of the pulse in the central waveguide.
△ Less
Submitted 16 May, 2008;
originally announced May 2008.
-
Efficient output coupling of intracavity high harmonic generation
Authors:
D. C. Yost,
T. R. Schibli,
Jun Ye
Abstract:
We demonstrate a novel technique for coupling XUV harmonic radiation out of a femtosecond enhancement cavity. We use a small-period diffraction grating etched directly into the surface of a dielectric mirror. For the fundamental light, this element acts as a high reflector. For harmonic wavelengths, it acts as a diffraction grating, coupling XUV radiation out of the cavity. Using this method, we…
▽ More
We demonstrate a novel technique for coupling XUV harmonic radiation out of a femtosecond enhancement cavity. We use a small-period diffraction grating etched directly into the surface of a dielectric mirror. For the fundamental light, this element acts as a high reflector. For harmonic wavelengths, it acts as a diffraction grating, coupling XUV radiation out of the cavity. Using this method, we observed the 3rd through 21st odd harmonics with a dramatic increase in usable power over previous results of high harmonic generation at high repetition rates.
△ Less
Submitted 18 March, 2008;
originally announced March 2008.
-
Prospects for precision measurements of atomic helium using direct frequency comb spectroscopy
Authors:
E. E. Eyler,
D. E. Chieda,
Matthew C. Stowe,
Michael J. Thorpe,
T. R. Schibli,
Jun Ye
Abstract:
We analyze several possibilities for precisely measuring electronic transitions in atomic helium by the direct use of phase-stabilized femtosecond frequency combs. Because the comb is self-calibrating and can be shifted into the ultraviolet spectral region via harmonic generation, it offers the prospect of greatly improved accuracy for UV and far-UV transitions. To take advantage of this accurac…
▽ More
We analyze several possibilities for precisely measuring electronic transitions in atomic helium by the direct use of phase-stabilized femtosecond frequency combs. Because the comb is self-calibrating and can be shifted into the ultraviolet spectral region via harmonic generation, it offers the prospect of greatly improved accuracy for UV and far-UV transitions. To take advantage of this accuracy an ultracold helium sample is needed. For measurements of the triplet spectrum a magneto-optical trap (MOT) can be used to cool and trap metastable 2^3S state atoms. We analyze schemes for measuring the two-photon $2^3S \to 4^3S$ interval, and for resonant two-photon excitation to high Rydberg states, $2^3S \to 3^3P \to n^3S,D$. We also analyze experiments on the singlet-state spectrum. To accomplish this we propose schemes for producing and trap** ultracold helium in the 1^1S or 2^1S state via intercombination transitions. A particularly intriguing scenario is the possibility of measuring the $1^1S \to 2^1S$ transition with extremely high accuracy by use of two-photon excitation in a magic wavelength trap that operates identically for both states. We predict a ``triple magic wavelength'' at 412 nm that could facilitate numerous experiments on trapped helium atoms, because here the polarizabilities of the 1^1S, 2^1S and 2^3S states are all similar, small, and positive.
△ Less
Submitted 11 July, 2007; v1 submitted 25 April, 2007;
originally announced April 2007.
