-
Galaxies Going Bananas: Inferring the 3D Geometry of High-Redshift Galaxies with JWST-CEERS
Authors:
Viraj Pandya,
Haowen Zhang,
Marc Huertas-Company,
Kartheik G. Iyer,
Elizabeth McGrath,
Guillermo Barro,
Steven L. Finkelstein,
Martin Kuemmel,
William G. Hartley,
Henry C. Ferguson,
Jeyhan S. Kartaltepe,
Joel Primack,
Avishai Dekel,
Sandra M. Faber,
David C. Koo,
Greg L. Bryan,
Rachel S. Somerville,
Ricardo O. Amorin,
Pablo Arrabal Haro,
Micaela B. Bagley,
Eric F. Bell,
Emmanuel Bertin,
Luca Costantin,
Romeel Dave,
Mark Dickinson
, et al. (31 additional authors not shown)
Abstract:
The 3D geometry of high-redshift galaxies remains poorly understood. We build a differentiable Bayesian model and use Hamiltonian Monte Carlo to efficiently and robustly infer the 3D shapes of star-forming galaxies in JWST-CEERS observations with $\log M_*/M_{\odot}=9.0-10.5$ at $z=0.5-8.0$. We reproduce previous results from HST-CANDELS in a fraction of the computing time and constrain the mean e…
▽ More
The 3D geometry of high-redshift galaxies remains poorly understood. We build a differentiable Bayesian model and use Hamiltonian Monte Carlo to efficiently and robustly infer the 3D shapes of star-forming galaxies in JWST-CEERS observations with $\log M_*/M_{\odot}=9.0-10.5$ at $z=0.5-8.0$. We reproduce previous results from HST-CANDELS in a fraction of the computing time and constrain the mean ellipticity, triaxiality, size and covariances with samples as small as $\sim50$ galaxies. We find high 3D ellipticities for all mass-redshift bins suggesting oblate (disky) or prolate (elongated) geometries. We break that degeneracy by constraining the mean triaxiality to be $\sim1$ for $\log M_*/M_{\odot}=9.0-9.5$ dwarfs at $z>1$ (favoring the prolate scenario), with significantly lower triaxialities for higher masses and lower redshifts indicating the emergence of disks. The prolate population traces out a ``banana'' in the projected $b/a-\log a$ diagram with an excess of low $b/a$, large $\log a$ galaxies. The dwarf prolate fraction rises from $\sim25\%$ at $z=0.5-1.0$ to $\sim50-80\%$ at $z=3-8$. If these are disks, they cannot be axisymmetric but instead must be unusually oval (triaxial) unlike local circular disks. We simultaneously constrain the 3D size-mass relation and its dependence on 3D geometry. High-probability prolate and oblate candidates show remarkably similar Sérsic indices ($n\sim1$), non-parametric morphological properties and specific star formation rates. Both tend to be visually classified as disks or irregular but edge-on oblate candidates show more dust attenuation. We discuss selection effects, follow-up prospects and theoretical implications.
△ Less
Submitted 15 January, 2024; v1 submitted 23 October, 2023;
originally announced October 2023.
-
Using the SourceXtractor++ package for data reduction
Authors:
M. Kümmel,
A. Álvarez-Ayllón,
E. Bertin,
P. Dubath,
R. Gavazzi,
W. Hartley,
M. Schefer
Abstract:
The Euclid satellite is an ESA mission scheduled for launch in September 2023. To optimally perform critical stages of the data reduction, such as object detection and morphology determination, a new and modern software package was required. We have developed SourceXtractor++ as open source software for detecting and measuring sources in astronomical images. It is a complete redesign of the origin…
▽ More
The Euclid satellite is an ESA mission scheduled for launch in September 2023. To optimally perform critical stages of the data reduction, such as object detection and morphology determination, a new and modern software package was required. We have developed SourceXtractor++ as open source software for detecting and measuring sources in astronomical images. It is a complete redesign of the original SExtractor, written mainly in C++. The package follows a modular approach and facilitates the analysis of multiple overlap** sources over many images with different pixel grids. SourceXtractor++ is already operational in many areas of the Euclid processing, and we demonstrate here the capabilities of the current version v0.19 on the basis of a set of typical use cases, which are available for download
△ Less
Submitted 5 December, 2022;
originally announced December 2022.
-
Euclid preparation XXVI. The Euclid Morphology Challenge. Towards structural parameters for billions of galaxies
Authors:
Euclid Collaboration,
H. Bretonnière,
U. Kuchner,
M. Huertas-Company,
E. Merlin,
M. Castellano,
D. Tuccillo,
F. Buitrago,
C. J. Conselice,
A. Boucaud,
B. Häußler,
M. Kümmel,
W. G. Hartley,
A. Alvarez Ayllon,
E. Bertin,
F. Ferrari,
L. Ferreira,
R. Gavazzi,
D. Hernández-Lang,
G. Lucatelli,
A. S. G. Robotham,
M. Schefer,
L. Wang,
R. Cabanac,
H. Domínguez Sánchez
, et al. (193 additional authors not shown)
Abstract:
The various Euclid imaging surveys will become a reference for studies of galaxy morphology by delivering imaging over an unprecedented area of 15 000 square degrees with high spatial resolution. In order to understand the capabilities of measuring morphologies from Euclid-detected galaxies and to help implement measurements in the pipeline, we have conducted the Euclid Morphology Challenge, which…
▽ More
The various Euclid imaging surveys will become a reference for studies of galaxy morphology by delivering imaging over an unprecedented area of 15 000 square degrees with high spatial resolution. In order to understand the capabilities of measuring morphologies from Euclid-detected galaxies and to help implement measurements in the pipeline, we have conducted the Euclid Morphology Challenge, which we present in two papers. While the companion paper by Merlin et al. focuses on the analysis of photometry, this paper assesses the accuracy of the parametric galaxy morphology measurements in imaging predicted from within the Euclid Wide Survey. We evaluate the performance of five state-of-the-art surface-brightness-fitting codes DeepLeGATo, Galapagos-2, Morfometryka, Profit and SourceXtractor++ on a sample of about 1.5 million simulated galaxies resembling reduced observations with the Euclid VIS and NIR instruments. The simulations include analytic Sérsic profiles with one and two components, as well as more realistic galaxies generated with neural networks. We find that, despite some code-specific differences, all methods tend to achieve reliable structural measurements (10% scatter on ideal Sérsic simulations) down to an apparent magnitude of about 23 in one component and 21 in two components, which correspond to a signal-to-noise ratio of approximately 1 and 5 respectively. We also show that when tested on non-analytic profiles, the results are typically degraded by a factor of 3, driven by systematics. We conclude that the Euclid official Data Releases will deliver robust structural parameters for at least 400 million galaxies in the Euclid Wide Survey by the end of the mission. We find that a key factor for explaining the different behaviour of the codes at the faint end is the set of adopted priors for the various structural parameters.
△ Less
Submitted 28 November, 2022; v1 submitted 26 September, 2022;
originally announced September 2022.
-
Euclid preparation. XXV. The Euclid Morphology Challenge -- Towards model-fitting photometry for billions of galaxies
Authors:
Euclid Collaboration,
E. Merlin,
M. Castellano,
H. Bretonnière,
M. Huertas-Company,
U. Kuchner,
D. Tuccillo,
F. Buitrago,
J. R. Peterson,
C. J. Conselice,
F. Caro,
P. Dimauro,
L. Nemani,
A. Fontana,
M. Kümmel,
B. Häußler,
W. G. Hartley,
A. Alvarez Ayllon,
E. Bertin,
P. Dubath,
F. Ferrari,
L. Ferreira,
R. Gavazzi,
D. Hernández-Lang,
G. Lucatelli
, et al. (196 additional authors not shown)
Abstract:
The ESA Euclid mission will provide high-quality imaging for about 1.5 billion galaxies. A software pipeline to automatically process and analyse such a huge amount of data in real time is being developed by the Science Ground Segment of the Euclid Consortium; this pipeline will include a model-fitting algorithm, which will provide photometric and morphological estimates of paramount importance fo…
▽ More
The ESA Euclid mission will provide high-quality imaging for about 1.5 billion galaxies. A software pipeline to automatically process and analyse such a huge amount of data in real time is being developed by the Science Ground Segment of the Euclid Consortium; this pipeline will include a model-fitting algorithm, which will provide photometric and morphological estimates of paramount importance for the core science goals of the mission and for legacy science. The Euclid Morphology Challenge is a comparative investigation of the performance of five model-fitting software packages on simulated Euclid data, aimed at providing the baseline to identify the best suited algorithm to be implemented in the pipeline. In this paper we describe the simulated data set, and we discuss the photometry results. A companion paper (Euclid Collaboration: Bretonnière et al. 2022) is focused on the structural and morphological estimates. We created mock Euclid images simulating five fields of view of 0.48 deg2 each in the $I_E$ band of the VIS instrument, each with three realisations of galaxy profiles (single and double Sérsic, and 'realistic' profiles obtained with a neural network); for one of the fields in the double Sérsic realisation, we also simulated images for the three near-infrared $Y_E$, $J_E$ and $H_E$ bands of the NISP-P instrument, and five Rubin/LSST optical complementary bands ($u$, $g$, $r$, $i$, and $z$). To analyse the results we created diagnostic plots and defined ad-hoc metrics. Five model-fitting software packages (DeepLeGATo, Galapagos-2, Morfometryka, ProFit, and SourceXtractor++) were compared, all typically providing good results. (cut)
△ Less
Submitted 26 September, 2022;
originally announced September 2022.
-
The Euclid Data Processing Challenges
Authors:
Pierre Dubath,
Nikolaos Apostolakos,
Andrea Bonchi,
Andrey Belikov,
Massimo Brescia,
Stefano Cavuoti,
Peter Capak,
Jean Coupon,
Christophe Dabin,
Hubert Degaudenzi,
Shantanu Desai,
Florian Dubath,
Adriano Fontana,
Sotiria Fotopoulou,
Marco Frailis,
Audrey Galametz,
John Hoar,
Mark Holliman,
Ben Hoyle,
Patrick Hudelot,
Olivier Ilbert,
Martin Kuemmel,
Martin Melchior,
Yannick Mellier,
Joe Mohr
, et al. (15 additional authors not shown)
Abstract:
Euclid is a Europe-led cosmology space mission dedicated to a visible and near infrared survey of the entire extra-galactic sky. Its purpose is to deepen our knowledge of the dark content of our Universe. After an overview of the Euclid mission and science, this contribution describes how the community is getting organized to face the data analysis challenges, both in software development and in o…
▽ More
Euclid is a Europe-led cosmology space mission dedicated to a visible and near infrared survey of the entire extra-galactic sky. Its purpose is to deepen our knowledge of the dark content of our Universe. After an overview of the Euclid mission and science, this contribution describes how the community is getting organized to face the data analysis challenges, both in software development and in operational data processing matters. It ends with a more specific account of some of the main contributions of the Swiss Science Data Center (SDC-CH).
△ Less
Submitted 27 January, 2017;
originally announced January 2017.
