-
Optimal design of small aperture optical terminals for free-space links
Authors:
Alex M. Frost,
Benjamin P. Dix-Matthews,
Shane M. Walsh,
David R. Gozzard,
Sascha W. Schediwy
Abstract:
We present the generalised design of low-complexity, small aperture optical terminals intended for kilometre-scale, terrestrial, free-space laser links between fixed and dynamic targets. The design features single-mode fibre coupling of the free-space beam, assisted by a fast-steering, tip/tilt mirror that enables first-order turbulence suppression and fine target tracking. The total power through…
▽ More
We present the generalised design of low-complexity, small aperture optical terminals intended for kilometre-scale, terrestrial, free-space laser links between fixed and dynamic targets. The design features single-mode fibre coupling of the free-space beam, assisted by a fast-steering, tip/tilt mirror that enables first-order turbulence suppression and fine target tracking. The total power throughput over the free-space link and the scintillation index in fibre are optimised. The optimal tip/tilt correction bandwidth and range, aperture size, and focal length for a given link are derived using analytical atmospheric turbulence modelling and numerical simulations.
△ Less
Submitted 4 July, 2024;
originally announced July 2024.
-
Free Space Optical Frequency Comparison Over Rapidly Moving Links
Authors:
Shawn M. P. McSorley,
Benjamin P. Dix-Matthews,
Alex M. Frost,
Ayden S. McCann,
Skevos F. E. Karpathakis,
David R. Gozzard,
Shane M. Walsh,
Sascha W. Schediwy
Abstract:
The comparison of optical reference frequency signals over free-space optical links is limited by the relative motion between local and remote sites. For ground to low earth orbit comparison, the expected Doppler shift and Doppler rate typically reach 4 GHz at 100 MHz/s, which prevents the narrow-band detection required to compare optical frequencies at the highest levels of stability. We demonstr…
▽ More
The comparison of optical reference frequency signals over free-space optical links is limited by the relative motion between local and remote sites. For ground to low earth orbit comparison, the expected Doppler shift and Doppler rate typically reach 4 GHz at 100 MHz/s, which prevents the narrow-band detection required to compare optical frequencies at the highest levels of stability. We demonstrate a system capable of optical frequency comparison in the presence of these significant Doppler shifts, using an electro-optic phase modulator with an actuation bandwidth of 10 GHz, which will enable ground-to-space frequency comparison. This system was demonstrated over a retro-reflected drone link, with a maximum line-of-sight velocity of 15 m/s and Doppler shift of 19 MHz at a Doppler rate of 1 MHz/s. The best fractional frequency stability obtained was 7E-18 at an integration time of 5s. These results are an important step toward ground to low earth orbit optical frequency comparison, providing a scalable terrestrial test bed.
△ Less
Submitted 24 June, 2024; v1 submitted 13 February, 2024;
originally announced February 2024.
-
Ultra-stable Free-Space Laser Links for a Global Network of Optical Atomic Clocks
Authors:
David R. Gozzard,
Lewis A. Howard,
Benjamin P. Dix-Matthews,
Skevos Karpathakis,
Charles Gravestock,
Sascha W. Schediwy
Abstract:
A global network of optical atomic clocks will enable unprecedented measurement precision in fields including tests of fundamental physics, dark matter searches, geodesy, and navigation. Free-space laser links through the turbulent atmosphere are needed to fully exploit this global network, by enabling comparisons to airborne and spaceborne clocks. We demonstrate frequency transfer over a 2.4 km a…
▽ More
A global network of optical atomic clocks will enable unprecedented measurement precision in fields including tests of fundamental physics, dark matter searches, geodesy, and navigation. Free-space laser links through the turbulent atmosphere are needed to fully exploit this global network, by enabling comparisons to airborne and spaceborne clocks. We demonstrate frequency transfer over a 2.4 km atmospheric link with turbulence similar to that of a ground-to-space link, achieving a fractional frequency stability of 6.1E-21 in 300 s of integration time. We also show that clock comparison between ground and low Earth orbit will be limited by the stability of the clocks themselves after only a few seconds of integration. This significantly advances the technologies needed to realize a global timescale network of optical atomic clocks.
△ Less
Submitted 24 June, 2021; v1 submitted 23 March, 2021;
originally announced March 2021.
-
Ultra-wideband free-space optical phase stabilisation
Authors:
Benjamin P. Dix-Matthews,
David R. Gozzard,
Skevos F. E. Karpathakis,
Charles T. Gravestock,
Sascha W. Schediwy
Abstract:
Free-space optical (FSO) communications has the potential to revolutionize wireless communications due to its advantages of inherent security, high-directionality, high available bandwidth and small physical footprint. The effects of atmospheric turbulence currently limit the performance of FSO communications. In this letter, we demonstrate a system capable of indiscriminately suppressing the atmo…
▽ More
Free-space optical (FSO) communications has the potential to revolutionize wireless communications due to its advantages of inherent security, high-directionality, high available bandwidth and small physical footprint. The effects of atmospheric turbulence currently limit the performance of FSO communications. In this letter, we demonstrate a system capable of indiscriminately suppressing the atmospheric phase noise encountered by independent optical signals spread over a range of 7.2 THz (encompassing the full optical C-Band), by actively phase stabilizing a primary optical signal at 193.1 THz (1552 nm). We show ~30 dB of indiscriminate phase stabilization over the full range, down to average phase noise at 10 Hz of -39.6 dBc/Hz when using an acousto-optic modulator (AOM) as a Doppler actuator, and -39.9 dBc/Hz when using a fiber-stretcher as group-delay actuator to provide the phase-stabilization system's feedback. We demonstrate that this suppression is limited by the noise of the independent optical signals, and that the expected achievable suppression is more than 40 dB greater, reaching around -90 dB/Hz at 10 Hz. We conclude that 40 Tbps ground-to-space FSO transmission would be made possible with the combination of our stabilization system and other demonstrated technologies.
△ Less
Submitted 20 January, 2021; v1 submitted 7 October, 2020;
originally announced October 2020.
-
Point-to-Point Stabilised Optical Frequency Transfer with Active Optics
Authors:
Benjamin P. Dix-Matthews,
Sascha W. Schediwy,
David R. Gozzard,
Etienne Savalle,
François-Xavier Esnault,
Thomas Lévèque,
Charles Gravestock,
Darlene D'Mello,
Skevos Karpathakis,
Michael Tobar,
Peter Wolf
Abstract:
Timescale comparison between optical atomic clocks over ground-to-space and terrestrial free-space laser links will have enormous benefits for fundamental and applied science, from measurements of fundamental constants and searches for dark matter, to geophysics and environmental monitoring. However, turbulence in the atmosphere creates phase noise on the laser signal, greatly degrading the precis…
▽ More
Timescale comparison between optical atomic clocks over ground-to-space and terrestrial free-space laser links will have enormous benefits for fundamental and applied science, from measurements of fundamental constants and searches for dark matter, to geophysics and environmental monitoring. However, turbulence in the atmosphere creates phase noise on the laser signal, greatly degrading the precision of the measurements, and also induces scintillation and beam wander which cause periodic deep fades and loss of signal. We demonstrate phase stabilized optical frequency transfer over a 265 m horizontal point-to-point free-space link between optical terminals with active tip-tilt mirrors to suppress beam wander, in a compact, human-portable set-up. A phase stabilized 715 m underground optical fiber link between the two terminals is used to measure the performance of the free-space link. The active optics terminals enabled continuous, coherent transmission over periods of up to an hour. We achieve an 80 dB suppression of atmospheric phase noise to $3\times10^{-6}$ rad$^{2}$Hz$^{-1}$ at 1 Hz, and an ultimate fractional frequency stability of $1.6\times10^{-19}$ after 40 s of integration. At high frequency this performance is limited by the residual atmospheric noise after compensation and the frequency noise of the laser seen through the unequal delays of the free space and fiber links. Our long term stability is limited by the thermal shielding of the phase stabilization system. We achieve residual instabilities below those of the best optical atomic clocks, ensuring clock-limited frequency comparison over turbulent free-space links.
△ Less
Submitted 22 January, 2021; v1 submitted 9 July, 2020;
originally announced July 2020.
-
Phase synchronisation system receiver module for the Mid-Frequency Square Kilometre Array
Authors:
Skevos F. E. Karpathakis,
Charles T. Gravestock,
David R. Gozzard,
Thea R. Pulbrook,
Sascha W. Schediwy
Abstract:
Next generation radio telescopes, such as the Square Kilometre Array (SKA) and Next Generation Very Large Array (ngVLA), require precise microwave frequency reference signals to be transmitted over fiber links to each dish to coherently sample astronomical signals. Such telescopes employ phase stabilization systems to suppress the phase noise imparted on the reference signals by environmental pert…
▽ More
Next generation radio telescopes, such as the Square Kilometre Array (SKA) and Next Generation Very Large Array (ngVLA), require precise microwave frequency reference signals to be transmitted over fiber links to each dish to coherently sample astronomical signals. Such telescopes employ phase stabilization systems to suppress the phase noise imparted on the reference signals by environmental perturbations on the links; however, the stabilization systems are bandwidth limited by the round-trip time of light travelling on the fiber links. A phase-locked Receiver Module (RM) is employed on each dish to suppress residual phase noise outside of the round-trip bandwidth. The SKA RM must deliver a 3.96 GHz output signal with 4 MHz of tuning range and less than 100 fs of timing jitter. We present an RM architecture to meet both requirements. Analytical modelling of the RM predicts 30 fs of output jitter when the reference signal is integrated between 1 Hz and 2.8 GHz. The proposed RM was conceived with best practice electromagnetic compatibility in mind, and to meet size, weight and power requirements for the SKA dish indexer. As the ngVLA reference design also incorporates a round-trip phase stabilization system, this RM may be applicable to future ngVLA design.
△ Less
Submitted 7 September, 2020; v1 submitted 30 June, 2020;
originally announced July 2020.
-
Methods for coherent optical Doppler orbitography
Authors:
Benjamin P. Dix-Matthews,
Sascha W. Schediwy,
David R. Gozzard,
Simon Driver,
Karl Ulrich Schreibe,
Randall Carman,
Michael Tobar
Abstract:
Doppler orbitography uses the Doppler shift in a transmitted signal to determine the orbital parameters of satellites including range and range-rate (or radial velocity). We describe two techniques for atmospheric-limited optical Doppler orbitography measurements of range-rate. The first determines the Doppler shift directly from a heterodyne measurement of the returned optical signal. The second…
▽ More
Doppler orbitography uses the Doppler shift in a transmitted signal to determine the orbital parameters of satellites including range and range-rate (or radial velocity). We describe two techniques for atmospheric-limited optical Doppler orbitography measurements of range-rate. The first determines the Doppler shift directly from a heterodyne measurement of the returned optical signal. The second aims to improve the precision of the first by suppressing atmospheric phase noise imprinted on the transmitted optical signal. We demonstrate the performance of each technique over a 2.2 km horizontal link with a simulated in-line velocity Doppler shift at the far end. A horizontal link of this length has been estimated to exhibit nearly half the total integrated atmospheric turbulence of a vertical link to space. Without stabilisation of the atmospheric effects, we obtained an estimated range rate precision of 17 um/s at 1 s of integration. With active suppression of atmospheric phase noise, this improved by three orders-of-magnitude to an estimated range rate precision of 9.0 nm/s at 1 second of integration, and 1.1 nm/s when integrated over a 60 s. This represents four orders-of-magnitude improvement over the typical performance of operational ground to space X-Band systems in terms of range-rate precision at the same integration time.
The performance of this system is a promising proof of concept for coherent optical Doppler orbitography. There are many additional challenges associated with performing these techniques from ground to space, that were not captured within the preliminary experiments presented here. In the future, we aim to progress towards a 10 km horizontal link to replicate the expected atmospheric turbulence for a ground to space link.
△ Less
Submitted 7 June, 2020; v1 submitted 5 May, 2020;
originally announced May 2020.
-
HIPSR: A Digital Signal Processor for the Parkes 21-cm Multibeam Receiver
Authors:
D. C. Price,
L. Staveley-Smith,
M. Bailes,
E. Carretti,
A. Jameson,
M. E. Jones,
W. van Straten,
S. W. Schediwy
Abstract:
HIPSR (HI-Pulsar) is a digital signal processing system for the Parkes 21-cm Multibeam Receiver that provides larger instantaneous bandwidth, increased dynamic range, and more signal processing power than the previous systems in use at Parkes. The additional computational capacity enables finer spectral resolution in wideband HI observations and real-time detection of Fast Radio Bursts during puls…
▽ More
HIPSR (HI-Pulsar) is a digital signal processing system for the Parkes 21-cm Multibeam Receiver that provides larger instantaneous bandwidth, increased dynamic range, and more signal processing power than the previous systems in use at Parkes. The additional computational capacity enables finer spectral resolution in wideband HI observations and real-time detection of Fast Radio Bursts during pulsar surveys. HIPSR uses a heterogeneous architecture, consisting of FPGA-based signal processing boards connected via high-speed Ethernet to high performance compute nodes. Low-level signal processing is conducted on the FPGA-based boards, and more complex signal processing routines are conducted on the GPU-based compute nodes. The development of HIPSR was driven by two main science goals: to provide large bandwidth, high-resolution spectra suitable for 21-cm stacking and intensity map** experiments; and to upgrade the Berkeley-Parkes-Swinburne Recorder (BPSR), the signal processing system used for the High Time Resolution Universe (HTRU) Survey and the Survey for Pulsars and Extragalactic Radio Bursts (SUPERB).
△ Less
Submitted 11 May, 2017; v1 submitted 1 February, 2017;
originally announced February 2017.
-
Beating the spin-down limit on gravitational wave emission from the Crab pulsar
Authors:
The LIGO Scientific Collaboration,
B. Abbott,
R. Abbott,
R. Adhikari,
P. Ajith,
B. Allen,
G. Allen,
R. Amin,
S. B. Anderson,
W. G. Anderson,
M. A. Arain,
M. Araya,
H. Armandula,
P. Armor,
Y. Aso,
S. Aston,
P. Aufmuth,
C. Aulbert,
S. Babak,
S. Ballmer,
H. Bantilan,
B. C. Barish,
C. Barker,
D. Barker,
B. Barr
, et al. (419 additional authors not shown)
Abstract:
We present direct upper limits on gravitational wave emission from the Crab pulsar using data from the first nine months of the fifth science run of the Laser Interferometer Gravitational-wave Observatory (LIGO). These limits are based on two searches. In the first we assume that the gravitational wave emission follows the observed radio timing, giving an upper limit on gravitational wave emissi…
▽ More
We present direct upper limits on gravitational wave emission from the Crab pulsar using data from the first nine months of the fifth science run of the Laser Interferometer Gravitational-wave Observatory (LIGO). These limits are based on two searches. In the first we assume that the gravitational wave emission follows the observed radio timing, giving an upper limit on gravitational wave emission that beats indirect limits inferred from the spin-down and braking index of the pulsar and the energetics of the nebula. In the second we allow for a small mismatch between the gravitational and radio signal frequencies and interpret our results in the context of two possible gravitational wave emission mechanisms.
△ Less
Submitted 22 July, 2008; v1 submitted 30 May, 2008;
originally announced May 2008.