-
$(g-2)_μ$ and SUSY Dark Matter: Direct Detection and Collider Search Complementarity
Authors:
Manimala Chakraborti,
Sven Heinemeyer,
Ipsita Saha,
Christian Schappacher
Abstract:
The electroweak (EW) sector of the Minimal Supersymmetric Standard Model (MSSM) can account for variety of experimental data. The EW particles with masses of a few hundred GeV evade the LHC searches owing to their small production cross sections. Such a light EW sector can in particular explain the reinforced $4.2\,σ$ discrepancy between the experimental result for the anomalous magnetic moment of…
▽ More
The electroweak (EW) sector of the Minimal Supersymmetric Standard Model (MSSM) can account for variety of experimental data. The EW particles with masses of a few hundred GeV evade the LHC searches owing to their small production cross sections. Such a light EW sector can in particular explain the reinforced $4.2\,σ$ discrepancy between the experimental result for the anomalous magnetic moment of the muon, \gmin2, and its Standard Model (SM) prediction. The lightest supersymmetric particle (LSP), assumed to be the lightest neutralino, $\tildeχ_1^0$, as a Dark Matter (DM) candidate is furthermore in agreement with the observed limits on the DM content of the universe. Here the Next-to LSP (NLSP) serves as a coannihilation partner and is naturally close in mass to the LSP. Such scenarios are also to a large extent in agreement with negative results from Direct Detection (DD) experiments. The DM relic density can fully be explained by a nearly pure bino or a mixed bino/wino LSP. Relatively light wino and higgsino DM, on the other hand, remains easily below the DM relic density upper bound. Using the improved limits on $(g-2)_μ$, we explore the mass ranges of the LSP and the NLSP in their correlation with the DM relic density for bino, bino/wino, wino and higgsino DM. In particular analyze the sensitivity of future DM DD experiments to these DM scenarios. We find that higgsino, wino and one type of bino scenario can be covered by future DD experiments. Mixed bino/wino and another type of bino DM can reach DD cross sections below the neutrino floor. In these cases we analyze the complementarity with the (HL-)LHC and future $e^+e^-$ linear colliders. We find that while the prospects for the HL-LHC are interesting, but not conclusive, an $e^+e^-$ collider with $\sqrt{s} \le 1$ TeV can cover effectively all points of the MSSM that may be missed by DD experiments.
△ Less
Submitted 2 December, 2021;
originally announced December 2021.
-
Higgs-Photon Production at Future $e^+e^-$ Colliders
Authors:
F. Arco,
S. Heinemeyer,
C. Schappacher
Abstract:
For the search for additional Higgs bosons in the Minimal Supersymmetric Standard Model (MSSM) as well as for future precision analyses in the Higgs sector a precise knowledge of their production properties is mandatory. We review the evaluation of the cross sections for the neutral Higgs boson production in association with a photon at future $e^+e^-$ colliders in the MSSM with complex parameters…
▽ More
For the search for additional Higgs bosons in the Minimal Supersymmetric Standard Model (MSSM) as well as for future precision analyses in the Higgs sector a precise knowledge of their production properties is mandatory. We review the evaluation of the cross sections for the neutral Higgs boson production in association with a photon at future $e^+e^-$ colliders in the MSSM with complex parameters (cMSSM). The evaluation is based on a full one-loop calculation of the production mechanism $e^+e^- \to h_i γ$ ($i = 1,2,3$). The dependence of the lightest Higgs-boson production cross sections on the relevant cMSSM parameters is analyzed numerically. We find relatively small numerical depedences of the production cross sections on the underlying parameters.
△ Less
Submitted 17 February, 2020;
originally announced February 2020.
-
High-Precision Electroweak SUSY Production Cross Sections at e+e- Colliders
Authors:
S. Heinemeyer,
C. Schappacher
Abstract:
For the search for electroweak (EW) particles in the Minimal Supersymmetric Standard Model (MSSM) as well as for future precision analyses of these particles an accurate knowledge of their production and decay properties is mandatory. We evaluate the cross sections for the chargino, neutralino and slepton production at e+e- colliders in the MSSM with complex parameters (cMSSM). The evaluation is b…
▽ More
For the search for electroweak (EW) particles in the Minimal Supersymmetric Standard Model (MSSM) as well as for future precision analyses of these particles an accurate knowledge of their production and decay properties is mandatory. We evaluate the cross sections for the chargino, neutralino and slepton production at e+e- colliders in the MSSM with complex parameters (cMSSM). The evaluation is based on a full one-loop calculation of all possible production channels including soft and hard photon radiation. The dependence of the cross sections on the relevant cMSSM parameters is analyzed numerically. We find sizable contributions to many production cross sections. They amount to roughly 15% of the tree-level results but can go up to 40% or higher in extreme cases. Also the dependence on complex parameters of the one-loop corrections for many production channels was found non-negligible. The full one-loop contributions are thus crucial for physics analyses at a future linear e+e- collider such as the ILC or CLIC.
△ Less
Submitted 11 July, 2018;
originally announced July 2018.
-
Slepton Production at e+e- Colliders in the Complex MSSM: A Full One-Loop Analysis
Authors:
S. Heinemeyer,
C. Schappacher
Abstract:
For the search for scalar leptons in the Minimal Supersymmetric Standard Model (MSSM) as well as for future precision analyses of these particles an accurate knowledge of their production and decay properties is mandatory. We evaluate the cross sections for the slepton production at e+e- colliders in the MSSM with complex parameters (cMSSM). The evaluation is based on a full one-loop calculation o…
▽ More
For the search for scalar leptons in the Minimal Supersymmetric Standard Model (MSSM) as well as for future precision analyses of these particles an accurate knowledge of their production and decay properties is mandatory. We evaluate the cross sections for the slepton production at e+e- colliders in the MSSM with complex parameters (cMSSM). The evaluation is based on a full one-loop calculation of the production mechanisms e+e- -> slepton_s slepton_s' including soft and hard photon radiation. The dependence of the slepton production cross sections on the relevant cMSSM parameters is analyzed numerically. We find sizable contributions to many production cross sections. They amount to roughly 15% of the tree-level results but can go up to 40% or higher in extreme cases. Also the complex phase dependence of the one-loop corrections for charged slepton production was found non-negligible. The full one-loop contributions are thus crucial for physics analyses at a future linear e+e- collider such as the ILC or CLIC.
△ Less
Submitted 27 March, 2018;
originally announced March 2018.
-
Production of Electroweak SUSY Particles at ILC and CLIC
Authors:
S. Heinemeyer,
C. Schappacher
Abstract:
For the search for electroweak particles in the Minimal Supersymmetric Standard Model (MSSM) as well as for future precision analyses of these particles an accurate knowledge of their production and decay properties is mandatory. We review the evaluation of the cross sections for the chargino, neutralino and scalar lepton production at e+e- colliders in the MSSM with complex parameters (cMSSM). Th…
▽ More
For the search for electroweak particles in the Minimal Supersymmetric Standard Model (MSSM) as well as for future precision analyses of these particles an accurate knowledge of their production and decay properties is mandatory. We review the evaluation of the cross sections for the chargino, neutralino and scalar lepton production at e+e- colliders in the MSSM with complex parameters (cMSSM). The evaluation is based on a full one-loop calculation of the various production mechanisms, including soft and hard photon radiation. The dependence of the chargino/neutralino/slepton cross sections on the relevant cMSSM parameters is analyzed numerically. We find sizable contributions to many production cross sections. They amount roughly +- 15% of the tree-level results, but can go up to +-40% or higher in extreme cases. Also the complex phase dependence of the one-loop corrections was found non-negligible. The full one-loop contributions are thus crucial for physics analyses at a future linear e+e- collider such as the ILC or CLIC.
△ Less
Submitted 16 January, 2018;
originally announced January 2018.
-
Chargino and Neutralino Production at e+e- Colliders in the Complex MSSM: A Full One-Loop Analysis
Authors:
S. Heinemeyer,
C. Schappacher
Abstract:
For the search for charginos and neutralinos in the Minimal Supersymmetric Standard Model (MSSM) as well as for future precision analyses of these particles an accurate knowledge of their production and decay properties is mandatory. We evaluate the cross sections for the chargino and neutralino production at e+e- colliders in the MSSM with complex parameters (cMSSM). The evaluation is based on a…
▽ More
For the search for charginos and neutralinos in the Minimal Supersymmetric Standard Model (MSSM) as well as for future precision analyses of these particles an accurate knowledge of their production and decay properties is mandatory. We evaluate the cross sections for the chargino and neutralino production at e+e- colliders in the MSSM with complex parameters (cMSSM). The evaluation is based on a full one-loop calculation of the production mechanisms e+e- -> cha_c cha_c' and e+e- -> neu_n neu_n', including soft and hard photon radiation. We mostly restricted ourselves to a version of our renormalization scheme which is valid for |M_1| < |M_2|, |mu| and M_2 != mu to simplify the analysis, even though we are able to switch to other parameter regions and correspondingly different renormalization schemes. The dependence of the chargino/neutralino cross sections on the relevant cMSSM parameters is analyzed numerically. We find sizable contributions to many production cross sections. They amount roughly 10-20% of the tree-level results, but can go up to 40% or higher in extreme cases. Also the complex phase dependence of the one-loop corrections was found non-negligible. The full one-loop contributions are thus crucial for physics analyses at a future linear e+e- collider such as the ILC or CLIC.
△ Less
Submitted 25 April, 2017;
originally announced April 2017.
-
Charged Higgs Boson Production at e+e- Colliders in the Complex MSSM: A Full One-Loop Analysis
Authors:
S. Heinemeyer,
C. Schappacher
Abstract:
For the search for additional Higgs bosons in the Minimal Supersymmetric Standard Model (MSSM) as well as for future precision analyses in the Higgs sector precise knowledge of their production properties is mandatory. We evaluate the cross sections for the charged Higgs boson production at e+e- colliders in the MSSM with complex parameters (cMSSM). The evaluation is based on a full one-loop calcu…
▽ More
For the search for additional Higgs bosons in the Minimal Supersymmetric Standard Model (MSSM) as well as for future precision analyses in the Higgs sector precise knowledge of their production properties is mandatory. We evaluate the cross sections for the charged Higgs boson production at e+e- colliders in the MSSM with complex parameters (cMSSM). The evaluation is based on a full one-loop calculation of the production mechanism e+e- -> H+H- and e+e- -> H^\pm W^\mp, including soft and hard QED radiation. The dependence of the Higgs boson production cross sections on the relevant cMSSM parameters is analyzed numerically. We find sizable contributions to many cross sections. They are, depending on the production channel, roughly of 5-10% of the tree-level results, but can go up to 20% or higher. The full one-loop contributions are important for a future linear e+e- collider such as the ILC or CLIC.
△ Less
Submitted 22 June, 2016;
originally announced June 2016.
-
FormCalc 9 and Extensions
Authors:
T. Hahn,
S. Passehr,
C. Schappacher
Abstract:
We present Version 9 of the Feynman-diagram calculator FormCalc and a flexible new suite of shell scripts and Mathematica packages based on FormCalc, which can be adapted and used as a template for calculations.
We present Version 9 of the Feynman-diagram calculator FormCalc and a flexible new suite of shell scripts and Mathematica packages based on FormCalc, which can be adapted and used as a template for calculations.
△ Less
Submitted 15 April, 2016;
originally announced April 2016.
-
Neutral Higgs Boson Production at e^+e^- Colliders in the Complex MSSM: Towards the LC Precision
Authors:
S. Heinemeyer,
C. Schappacher
Abstract:
For the search for additional Higgs bosons in the Minimal Supersymmetric Standard Model (MSSM) as well as for future precision analyses in the Higgs sector a precise knowledge of their production properties is mandatory. We review the evaluation of the cross sections for the neutral Higgs boson production at e^+e^- colliders in the MSSM with complex parameters (cMSSM). The evaluation is based on a…
▽ More
For the search for additional Higgs bosons in the Minimal Supersymmetric Standard Model (MSSM) as well as for future precision analyses in the Higgs sector a precise knowledge of their production properties is mandatory. We review the evaluation of the cross sections for the neutral Higgs boson production at e^+e^- colliders in the MSSM with complex parameters (cMSSM). The evaluation is based on a full one-loop calculation of the production mechanisms e^+e^- -> h_i Z, h_i gamma, h_i h_j (i,j = 1,2,3), including soft and hard QED radiation. The dependence of the Higgs boson production cross sections on the relevant cMSSM parameters is analyzed numerically. We find sizable contributions to many cross sections. They are, depending on the production channel, roughly of 10-20% of the tree-level results, but can go up to 50% or higher.
△ Less
Submitted 25 February, 2016;
originally announced February 2016.
-
Neutral Higgs Boson Production at e+e- Colliders in the Complex MSSM: A Full One-Loop Analysis
Authors:
S. Heinemeyer,
C. Schappacher
Abstract:
For the search for additional Higgs bosons in the Minimal Supersymmetric Standard Model (MSSM) as well as for future precision analyses in the Higgs sector a precise knowledge of their production properties is mandatory. We evaluate the cross sections for the neutral Higgs boson production at e^+e^- colliders in the MSSM with complex parameters (cMSSM). The evaluation is based on a full one-loop c…
▽ More
For the search for additional Higgs bosons in the Minimal Supersymmetric Standard Model (MSSM) as well as for future precision analyses in the Higgs sector a precise knowledge of their production properties is mandatory. We evaluate the cross sections for the neutral Higgs boson production at e^+e^- colliders in the MSSM with complex parameters (cMSSM). The evaluation is based on a full one-loop calculation of the production channels e^+e^- -> h_i Z, h_i gamma, h_i h_j (i,j = 1,2,3), including soft and hard QED radiation. The dependence of the Higgs boson production cross sections on the relevant cMSSM parameters is analyzed numerically. We find sizable contributions to many cross sections. They are, depending on the production channel, roughly of 10-20% of the tree-level results, but can go up to 50% or higher. The full one-loop contributions are important for a future linear e^+e^- collider such as the ILC or CLIC. There are plans to implement the evaluation of the Higgs boson production cross sections into the code FeynHiggs.
△ Less
Submitted 18 November, 2015;
originally announced November 2015.
-
Higgs Decays into Charginos and Neutralinos in the Complex MSSM: A Full One-Loop Analysis
Authors:
S. Heinemeyer,
C. Schappacher
Abstract:
For the search for additional Higgs bosons in the Minimal Supersymmetric Standard Model (MSSM) as well as for future precision analyses in the Higgs sector a precise knowledge of their decay properties is mandatory. We evaluate all two-body decay modes of the Higgs bosons into charginos and neutralinos in the MSSM with complex parameters (cMSSM). The evaluation is based on a full one-loop calculat…
▽ More
For the search for additional Higgs bosons in the Minimal Supersymmetric Standard Model (MSSM) as well as for future precision analyses in the Higgs sector a precise knowledge of their decay properties is mandatory. We evaluate all two-body decay modes of the Higgs bosons into charginos and neutralinos in the MSSM with complex parameters (cMSSM). The evaluation is based on a full one-loop calculation of all decay channels, also including hard QED radiation. We restricted ourselves to a version of our renormalization scheme which is valid for |M_1| < |M_2|, |mu| and M_2 != mu to simplify the analysis, even though we are able to switch to other parameter regions. The dependence of the Higgs boson predictions on the relevant cMSSM parameters is analyzed numerically. We find sizable contributions to many partial decay widths. They are roughly of 10% of the tree-level results, but can go up to 20% or higher. The full one-loop contributions are important for the correct interpretation of heavy Higgs boson search results at the LHC and, if kinematically allowed, at a future linear e+e- collider. It is planned to implement the evaluation of the branching ratios of the Higgs bosons into the Fortran code FeynHiggs, together with an automated choice of the renormalization scheme valid for the full cMSSM parameter space.
△ Less
Submitted 10 March, 2015;
originally announced March 2015.
-
Heavy Higgs Decays into Sfermions in the Complex MSSM: A Full One-Loop Analysis
Authors:
S. Heinemeyer,
C. Schappacher
Abstract:
For the search for additional Higgs bosons in the Minimal Supersymmetric Standard Model (MSSM) as well as for future precision analyses in the Higgs sector a precise knowledge of their decay properties is mandatory. We evaluate all two-body decay modes of the heavy Higgs bosons into sfermions in the MSSM with complex parameters (cMSSM). The evaluation is based on a full one-loop calculation of all…
▽ More
For the search for additional Higgs bosons in the Minimal Supersymmetric Standard Model (MSSM) as well as for future precision analyses in the Higgs sector a precise knowledge of their decay properties is mandatory. We evaluate all two-body decay modes of the heavy Higgs bosons into sfermions in the MSSM with complex parameters (cMSSM). The evaluation is based on a full one-loop calculation of all decay channels, also including hard QED and QCD radiation. The dependence of the heavy Higgs bosons on the relevant cMSSM parameters is analyzed numerically. We find sizable contributions to many partial decay widths. They are roughly of O(15%) of the tree-level results, but can go up to 30% or higher. The size of the electroweak one-loop corrections can be as large as the QCD corrections. The full one-loop contributions are important for the correct interpretation of heavy Higgs boson search results at the LHC and, if kinematically allowed, at a future linear e+e- collider. The evaluation of the branching ratios of the heavy Higgs bosons will be implemented into the Fortran code FeynHiggs.
△ Less
Submitted 10 October, 2014;
originally announced October 2014.
-
New Developments in FormCalc 8.4
Authors:
C. Groß,
T. Hahn,
S. Heinemeyer,
F. von der Pahlen,
H. Rzehak,
C. Schappacher
Abstract:
We present new developments in FeynArts 3.9 and FormCalc 8.4, in particular the MSSMCT model file including the complete one-loop renormalization, vectorization/parallelization issues, and the interface to the Ninja library for tensor reduction.
We present new developments in FeynArts 3.9 and FormCalc 8.4, in particular the MSSMCT model file including the complete one-loop renormalization, vectorization/parallelization issues, and the interface to the Ninja library for tensor reduction.
△ Less
Submitted 1 July, 2014;
originally announced July 2014.
-
Fully Automated Calculations in the complex MSSM
Authors:
T. Hahn,
S. Heinemeyer,
F. von der Pahlen,
H. Rzehak,
C. Schappacher
Abstract:
We review recent progress towards automated higher-order calculations in the MSSM with complex parameters (cMSSM). The consistent renormalization of all relevant sectors of the cMSSM and the inclusion into the FeynArts/FormCalc framework has recently been completed. Some example calculations applying this framework are briefly discussed. These include two-loop corrections to cMSSM Higgs boson mass…
▽ More
We review recent progress towards automated higher-order calculations in the MSSM with complex parameters (cMSSM). The consistent renormalization of all relevant sectors of the cMSSM and the inclusion into the FeynArts/FormCalc framework has recently been completed. Some example calculations applying this framework are briefly discussed. These include two-loop corrections to cMSSM Higgs boson masses as well as partial decay widths of electroweak supersymmetric particles decaying into a Higgs boson and another supersymmetric particle.
△ Less
Submitted 1 July, 2014;
originally announced July 2014.
-
The Implementation of the Renormalized Complex MSSM in FeynArts and FormCalc
Authors:
T. Fritzsche,
T. Hahn,
S. Heinemeyer,
F. von der Pahlen,
H. Rzehak,
C. Schappacher
Abstract:
We describe the implementation of the renormalized complex MSSM (cMSSM) in the diagram generator FeynArts and the calculational tool FormCalc. This extension allows to perform UV-finite one-loop calculations of cMSSM processes almost fully automatically. The Feynman rules for the cMSSM with counterterms are available as a new model file for FeynArts. Also included are default definitions of the re…
▽ More
We describe the implementation of the renormalized complex MSSM (cMSSM) in the diagram generator FeynArts and the calculational tool FormCalc. This extension allows to perform UV-finite one-loop calculations of cMSSM processes almost fully automatically. The Feynman rules for the cMSSM with counterterms are available as a new model file for FeynArts. Also included are default definitions of the renormalization constants; this fixes the renormalization scheme. Beyond that all model parameters are generic, e.g. we do not impose any relations to restrict the number of input parameters. The model file has been tested extensively for several non-trivial decays and scattering reactions. Our renormalization scheme has been shown to give stable results over large parts of the cMSSM parameter space.
△ Less
Submitted 5 February, 2014; v1 submitted 6 September, 2013;
originally announced September 2013.
-
Neutralino Decays in the Complex MSSM at One-Loop: a Comparison of On-Shell Renormalization Schemes
Authors:
A. Bharucha,
S. Heinemeyer,
F. von der Pahlen,
C. Schappacher
Abstract:
We evaluate two-body decay modes of neutralinos in the Minimal Supersymmetric Standard Model with complex parameters (cMSSM). Assuming heavy scalar quarks we take into account all two-body decay channels involving charginos, neutralinos, (scalar) leptons, Higgs bosons and Standard Model gauge bosons. The evaluation of the decay widths is based on a full one-loop calculation including hard and soft…
▽ More
We evaluate two-body decay modes of neutralinos in the Minimal Supersymmetric Standard Model with complex parameters (cMSSM). Assuming heavy scalar quarks we take into account all two-body decay channels involving charginos, neutralinos, (scalar) leptons, Higgs bosons and Standard Model gauge bosons. The evaluation of the decay widths is based on a full one-loop calculation including hard and soft QED radiation. Of particular phenomenological interest are decays involving the Lightest Supersymmetric Particle (LSP), i.e. the lightest neutralino, or a neutral or charged Higgs boson. For the chargino/neutralino sector we employ two different renormalization schemes, which differ in the treatment of the complex phases. In the numerical analysis we concentrate on the decay of the heaviest neutralino and show the results in the two different schemes. The higher-order corrections of the heaviest neutralino decay widths involving the LSP can easily reach a level of about 10-15%, while the corrections to the decays to Higgs bosons are up to 20-30%, translating into corrections of similar size in the respective branching ratios. The difference between the two schemes, indicating the size of unknown two-loop corrections, is less than order(0.1%). These corrections are important for the correct interpretation of LSP and Higgs production at the LHC and at a future linear e+e- collider. The results will be implemented into the Fortran code FeynHiggs.
△ Less
Submitted 22 August, 2012; v1 submitted 20 August, 2012;
originally announced August 2012.
-
Heavy Scalar Tau Decays in the Complex MSSM: A Full One-Loop Analysis
Authors:
S. Heinemeyer,
C. Schappacher
Abstract:
We evaluate all two-body decay modes of the heavy scalar tau in the Minimal Supersymmetric Standard Model with complex parameters (cMSSM) and no generation mixing. The evaluation is based on a full one-loop calculation of all decay channels, also including hard and soft QED radiation. The renormalization of the relevant sectors is briefly reviewed. The dependence of the heavy scalar tau decay on t…
▽ More
We evaluate all two-body decay modes of the heavy scalar tau in the Minimal Supersymmetric Standard Model with complex parameters (cMSSM) and no generation mixing. The evaluation is based on a full one-loop calculation of all decay channels, also including hard and soft QED radiation. The renormalization of the relevant sectors is briefly reviewed. The dependence of the heavy scalar tau decay on the relevant cMSSM parameters is analyzed numerically, including also the decay to Higgs bosons and another scalar lepton or to a tau and the lightest neutralino. We find sizable contributions to many partial decay widths and branching ratios. They are mostly of O(5-10%) of the tree-level results, but can go up to 20%. These contributions are potentially important for the correct interpretation of scalar tau decays at the LHC and, if kinematically allowed, at the ILC or CLIC. The evaluation of the branching ratios of the heavy scalar tau will be implemented into the Fortran code FeynHiggs.
△ Less
Submitted 18 April, 2012;
originally announced April 2012.
-
Neutralinos from Chargino Decays in the Complex MSSM
Authors:
S. Heinemeyer,
F. v. d. Pahlen,
C. Schappacher
Abstract:
We review the evaluation of two-body decay modes of charginos in the Minimal Supersymmetric Standard Model with complex parameters (cMSSM). Assuming heavy scalar quarks we take into account all decay channels involving charginos, neutralinos, (scalar) leptons, Higgs bosons and SM gauge bosons. The evaluation of the decay widths is based on a full one-loop calculation including hard and soft QED ra…
▽ More
We review the evaluation of two-body decay modes of charginos in the Minimal Supersymmetric Standard Model with complex parameters (cMSSM). Assuming heavy scalar quarks we take into account all decay channels involving charginos, neutralinos, (scalar) leptons, Higgs bosons and SM gauge bosons. The evaluation of the decay widths is based on a full one-loop calculation including hard and soft QED radiation. Here we focus on the decays involving the Lightest Supersymmetric Particle (LSP), i.e. the lightest neutralino, or a heavier neutralino and a W boson. The higher-order corrections of the chargino decay widths can easily reach a level of \pm 10%, translating into corrections of similar size in the respective branching ratios. These corrections are important for the correct interpretation of LSP and heavier neutralino production at the LHC and at a future linear e+e- collider.
△ Less
Submitted 2 February, 2012;
originally announced February 2012.
-
MSSM Higgs Bosons from Stop and Chargino Decays
Authors:
S. Heinemeyer,
F. v. d. Pahlen,
H. Rzehak,
C. Schappacher
Abstract:
The Higgs bosons of the MSSM can be produced from the decay of SUSY particles. We review the evalulation of two decay modes in the MSSM with complex parameters (cMSSM). The first type is the decay of the heavy scalar top quark to a lighter scalar quark and a Higgs boson. The second type is the decay of the heavy chargino to a lighter chargino/neutralino and a Higgs boson. The evaluation is based o…
▽ More
The Higgs bosons of the MSSM can be produced from the decay of SUSY particles. We review the evalulation of two decay modes in the MSSM with complex parameters (cMSSM). The first type is the decay of the heavy scalar top quark to a lighter scalar quark and a Higgs boson. The second type is the decay of the heavy chargino to a lighter chargino/neutralino and a Higgs boson. The evaluation is based on a full one-loop calculation including hard QED and QCD radiation. We find sizable contributions to many partial decay widths and branching ratios. They are roughly of O(10%) of the tree-level results, but can go up to 30% or higher. These contributions are important for the correct interpretation of scalar top quark decays at a future linear e+e- collider.
△ Less
Submitted 30 January, 2012;
originally announced January 2012.
-
Gluino Decays in the Complex MSSM: A Full One-Loop Analysis
Authors:
S. Heinemeyer,
C. Schappacher
Abstract:
We evaluate all two-body decay modes of the gluino, in the Minimal Supersymmetric Standard Model with complex parameters (cMSSM). This constitutes an important step in the cascade decays of SUSY particles at the LHC. The evaluation is based on a full one-loop calculation of all two-body decay channels, also including hard QED and QCD radiation. The dependence of the gluino decay to a scalar quark…
▽ More
We evaluate all two-body decay modes of the gluino, in the Minimal Supersymmetric Standard Model with complex parameters (cMSSM). This constitutes an important step in the cascade decays of SUSY particles at the LHC. The evaluation is based on a full one-loop calculation of all two-body decay channels, also including hard QED and QCD radiation. The dependence of the gluino decay to a scalar quark and a quark on the relevant cMSSM parameters is analyzed numerically. We find sizable contributions to the decay widths and branching ratios. They are, roughly of O(5%), but can go up to +-10% or higher, where the pure SUSY QCD contributions alone can give an insufficient approximation to the full one-loop result. Therefore the full corrections are important for the correct interpretation of gluino decays at the LHC. The results will be implemented into the Fortran code FeynHiggs.
△ Less
Submitted 13 December, 2011;
originally announced December 2011.
-
Chargino Decays in the Complex MSSM: A Full One-Loop Analysis
Authors:
S. Heinemeyer,
F. von der Pahlen,
C. Schappacher
Abstract:
We evaluate two-body decay modes of charginos in the Minimal Supersymmetric Standard Model with complex parameters (cMSSM). Assuming heavy scalar quarks we take into account all decay channels involving charginos, neutralinos, (scalar) leptons, Higgs bosons and Standard Model gauge bosons. The evaluation of the decay widths is based on a full one-loop calculation including hard and soft QED radiat…
▽ More
We evaluate two-body decay modes of charginos in the Minimal Supersymmetric Standard Model with complex parameters (cMSSM). Assuming heavy scalar quarks we take into account all decay channels involving charginos, neutralinos, (scalar) leptons, Higgs bosons and Standard Model gauge bosons. The evaluation of the decay widths is based on a full one-loop calculation including hard and soft QED radiation. Special attention is paid to decays involving the Lightest Supersymmetric Particle (LSP), i.e. the lightest neutralino, or a neutral or charged Higgs boson. The higher-order corrections of the chargino decay widths involving the LSP can easily reach a level of about \pm 10%, while the corrections to the decays to Higgs bosons are slightly smaller, translating into corrections of similar size in the respective branching ratios. These corrections are important for the correct interpretation of LSP and Higgs production at the LHC and at a future linear e+e- collider. The results will be implemented into the Fortran code FeynHiggs.
△ Less
Submitted 27 February, 2012; v1 submitted 4 December, 2011;
originally announced December 2011.
-
Heavy Scalar Top Quark Decays in the Complex MSSM: A Full One-Loop Analysis
Authors:
T. Fritzsche,
S. Heinemeyer,
H. Rzehak,
C. Schappacher
Abstract:
We evaluate all two-body decay modes of the heavy scalar top quark in the Minimal Supersymmetric Standard Model with complex parameters (cMSSM) and no generation mixing. The evaluation is based on a full one-loop calculation of all decay channels, also including hard QED and QCD radiation. The renormalization of the complex parameters is described in detail. The dependence of the heavy scalar top…
▽ More
We evaluate all two-body decay modes of the heavy scalar top quark in the Minimal Supersymmetric Standard Model with complex parameters (cMSSM) and no generation mixing. The evaluation is based on a full one-loop calculation of all decay channels, also including hard QED and QCD radiation. The renormalization of the complex parameters is described in detail. The dependence of the heavy scalar top quark decay on the relevant cMSSM parameters is analyzed numerically, including also the decay to Higgs bosons and another scalar quark or to a top quark and the lightest neutralino. We find sizable contributions to many partial decay widths and branching ratios. They are roughly of O(10%) of the tree-level results, but can go up to 30% or higher. These contributions are important for the correct interpretation of scalar top quark decays at the LHC and, if kinematically allowed, at the ILC. The evaluation of the branching ratios of the heavy scalar top quark will be implemented into the Fortran code FeynHiggs.
△ Less
Submitted 26 September, 2012; v1 submitted 30 November, 2011;
originally announced November 2011.
-
Consistent Higher-Order Corrections to Stop_i -> Sbottom_j H^+ in the Complex MSSM
Authors:
S. Heinemeyer,
H. Rzehak,
C. Schappacher
Abstract:
We review an analysis of a consistent renormalization of the top and bottom quark/squark sector of the MSSM with complex parameters (cMSSM). Various renormalization schemes are defined, analyzed analytically and tested numerically in the decays Stop_2 -> Sbottom_i H^+/W^+ (i = 1,2). No scheme is found that produces numerically acceptable results over all the cMSSM parameter space, where problems o…
▽ More
We review an analysis of a consistent renormalization of the top and bottom quark/squark sector of the MSSM with complex parameters (cMSSM). Various renormalization schemes are defined, analyzed analytically and tested numerically in the decays Stop_2 -> Sbottom_i H^+/W^+ (i = 1,2). No scheme is found that produces numerically acceptable results over all the cMSSM parameter space, where problems occur mostly already for real parameters. Some numerical examples for Gamma(Stop_2 -> Sbottom_1 H^+) in our preferred scheme, "m_b, A_b DRbar" are shown.
△ Less
Submitted 21 December, 2010;
originally announced December 2010.
-
Proposals for Bottom Quark/Squark Renormalization in the Complex MSSM
Authors:
S. Heinemeyer,
H. Rzehak,
C. Schappacher
Abstract:
We present a consistent renormalization of the top and bottom quark/squark sector of the MSSM with complex parameters (cMSSM). Various renormalization schemes are defined, analyzed analytically and tested numerically in the decays Stop_2 -> Sbot_i H+/W+ (i = 1,2). No scheme is found that produces numerically acceptable results over all the cMSSM parameter space, where problems occur mostly already…
▽ More
We present a consistent renormalization of the top and bottom quark/squark sector of the MSSM with complex parameters (cMSSM). Various renormalization schemes are defined, analyzed analytically and tested numerically in the decays Stop_2 -> Sbot_i H+/W+ (i = 1,2). No scheme is found that produces numerically acceptable results over all the cMSSM parameter space, where problems occur mostly already for real parameters. Two schemes are identified that show the most robust behavior. A numerical analysis of the four partial stop decay widths is performed in our "preferred" scheme, "m_b, A_b DRbar". The full one-loop corrections to the corresponding partial decay widths are evaluated including hard QED and QCD radiation. We find mostly modest corrections at the one-loop level.
△ Less
Submitted 5 July, 2010;
originally announced July 2010.
-
Little-Higgs corrections to precision data after LEP2
Authors:
Guido Marandella,
Christian Schappacher,
Alessandro Strumia
Abstract:
We reconsider little-Higgs corrections to precision data. In five models with global symmetries SU(5), SU(6), SO(9) corrections are (although not explicitly) of `universal' type. We get simple expressions for the Shat, That, W, Y parameters, which summarize all effects. In all models Shat > (W+Y)/2 and That, W, Y\ge 0. Results differ from previous analyses, which are sometimes incomplete, someti…
▽ More
We reconsider little-Higgs corrections to precision data. In five models with global symmetries SU(5), SU(6), SO(9) corrections are (although not explicitly) of `universal' type. We get simple expressions for the Shat, That, W, Y parameters, which summarize all effects. In all models Shat > (W+Y)/2 and That, W, Y\ge 0. Results differ from previous analyses, which are sometimes incomplete, sometimes incorrect, and because we add LEP2 e ebar --> f fbar cross sections to the data set. Depending on the model the constraint on f ranges between 2 and 20 TeV.
We next study the `simplest' little-Higgs model (and propose a new related model) which is not `universal' and affects precision data due to the presence of an extra Z' vector. By restricting the data-set to the most accurate leptonic data we show how corrections to precision data generated by a generic Z' can be encoded in four effective Shat, That, W, Y parameters, giving their expressions.
△ Less
Submitted 13 June, 2005; v1 submitted 10 February, 2005;
originally announced February 2005.
-
Supersymmetry and precision data after LEP2
Authors:
Guido Marandella,
Christian Schappacher,
Alessandro Strumia
Abstract:
We study one loop supersymmetric corrections to precision observables. Adding LEP2 e ebar --> f fbar cross sections to the data-set removes previous hints for SUSY and the resulting constraints are in some cases stronger than direct bounds on sparticle masses. We consider specific models: split SUSY, CMSSM, gauge mediation, anomaly and radion mediation. Beyond performing a complete one-loop anal…
▽ More
We study one loop supersymmetric corrections to precision observables. Adding LEP2 e ebar --> f fbar cross sections to the data-set removes previous hints for SUSY and the resulting constraints are in some cases stronger than direct bounds on sparticle masses. We consider specific models: split SUSY, CMSSM, gauge mediation, anomaly and radion mediation. Beyond performing a complete one-loop analysis, we also develop a simple approximation, based on the Shat, That, W, Y `universal' parameters. SUSY corrections give W,Y > 0 and mainly depend on the left-handed slepton and squark masses, on M_2 and on mu.
△ Less
Submitted 10 February, 2005;
originally announced February 2005.
-
Top Quark Physics at Colliders
Authors:
E. W. N. Glover,
F. del Aguila,
J. A. Aguilar--Saavedra,
M. Beccaria,
S. Bejar,
A. Brandenburg,
J. Fleischer,
J. Guasch,
T. Hahn,
W. Hollik,
S. Heinemeyer,
S. Kraml,
A. Leike,
A. Lorca,
W. Porod,
S. Prelovsek,
F. M. Renard,
T. Riemann,
C. Schappacher,
Z. G. Si,
J. Sola,
P. Uwer,
C. Verzegnassi,
G. Weiglein,
A. Werthenbach
Abstract:
We review some recent developments in top quark production and decay at current and future colliders.
We review some recent developments in top quark production and decay at current and future colliders.
△ Less
Submitted 9 October, 2004; v1 submitted 7 October, 2004;
originally announced October 2004.
-
Complete electroweak one-loop radiative corrections to top-pair production at TESLA -- a comparison
Authors:
J. Fleischer,
T. Hahn,
W. Hollik,
T. Riemann,
C. Schappacher,
A. Werthenbach
Abstract:
Electroweak one-loop radiative corrections to the process e^+ e^- -> t tbar are revisited. Two groups from Karlsruhe and Bielefeld/Zeuthen performed independent calculations of both (virtual and soft) QED contributions and weak virtual corrections. For the angular distribution an agreement of at least eight digits for the weak corrections and of at least seven digits for additional photonic corr…
▽ More
Electroweak one-loop radiative corrections to the process e^+ e^- -> t tbar are revisited. Two groups from Karlsruhe and Bielefeld/Zeuthen performed independent calculations of both (virtual and soft) QED contributions and weak virtual corrections. For the angular distribution an agreement of at least eight digits for the weak corrections and of at least seven digits for additional photonic corrections is established.
△ Less
Submitted 19 September, 2002; v1 submitted 12 February, 2002;
originally announced February 2002.
-
Electroweak Radiative Corrections to Neutral-Current Drell-Yan Processes at Hadron Colliders
Authors:
U. Baur,
O. Brein,
W. Hollik,
C. Schappacher,
D. Wackeroth
Abstract:
We calculate the complete electroweak O(alpha) corrections to pp, pbar p -> l+l- X (l=e, mu) in the Standard Model of electroweak interactions. They comprise weak and photonic virtual one-loop corrections as well as real photon radiation to the parton-level processes q bar q -> gamma,Z -> l+l-. We study in detail the effect of the radiative corrections on the l+l- invariant mass distribution, th…
▽ More
We calculate the complete electroweak O(alpha) corrections to pp, pbar p -> l+l- X (l=e, mu) in the Standard Model of electroweak interactions. They comprise weak and photonic virtual one-loop corrections as well as real photon radiation to the parton-level processes q bar q -> gamma,Z -> l+l-. We study in detail the effect of the radiative corrections on the l+l- invariant mass distribution, the cross section in the Z boson resonance region, and on the forward-backward asymmetry, A_FB, at the Fermilab Tevatron and the CERN Large Hadron Collider. The weak corrections are found to increase the Z boson cross section by about 1%, but have little effect on the forward-backward asymmetry in the Z peak region. Threshold effects of the W box diagrams lead to pronounced effects in A_FB at m(l+l-) approx 160 GeV which, however, will be difficult to observe experimentally. At high di-lepton invariant masses, the non-factorizable weak corrections are found to become large.
△ Less
Submitted 31 August, 2001;
originally announced August 2001.
-
The Implementation of the Minimal Supersymmetric Standard Model in FeynArts and FormCalc
Authors:
T. Hahn,
C. Schappacher
Abstract:
We describe the implementation of the MSSM in the diagram generator FeynArts and the calculational tool FormCalc. This extension allows to perform loop calculations of MSSM processes almost fully automatically. The actual implementation has two aspects: The MSSM Feynman rules are specified in a new model file for FeynArts. The computation of the parameters in the MSSM Lagrangian from the input p…
▽ More
We describe the implementation of the MSSM in the diagram generator FeynArts and the calculational tool FormCalc. This extension allows to perform loop calculations of MSSM processes almost fully automatically. The actual implementation has two aspects: The MSSM Feynman rules are specified in a new model file for FeynArts. The computation of the parameters in the MSSM Lagrangian from the input parameters is realized as a Fortran subroutine in the framework of FormCalc. The model file does not depend on the latter, however, and can be used even if one does not want to continue the calculation with FormCalc. The Feynman rules have been entered in a very generic way to allow e.g. scenarios with complex parameters, and have been tested extensively by reproducing known results for several non-trivial scattering processes.
△ Less
Submitted 31 May, 2001;
originally announced May 2001.
-
Electroweak Physics
Authors:
G. Azuelos,
U. Baur,
J. van der Bij,
D. Bourilkov,
O. Brein,
R. Casalbuoni,
A. Deandrea,
S. De Curtis,
D. De Florian,
A. Denner,
S. Dittmaier,
M. Dittmar,
A. Dobado,
M. Dobbs,
D. Dominici,
R. Gatto,
A. Ghinculov,
F. Gianotti,
M. Grazzini,
J. B. Hansen,
R. Harper,
S. Haywood,
S. Heinemeyer,
M. J. Herrero,
P. R. Hobson
, et al. (25 additional authors not shown)
Abstract:
We review the prospects for studies in electroweak physics at the LHC.
We review the prospects for studies in electroweak physics at the LHC.
△ Less
Submitted 28 March, 2000;
originally announced March 2000.
-
Top-Quark Production and Decay in the MSSM
Authors:
J. Guasch,
W. Hollik,
J. I. Illana,
C. Schappacher,
J. Sola
Abstract:
We review the features of top-quark decays and loop-induced effects in the production cross section and CP-violating observables of e+e- -> t t-bar which are specific to the R-parity conserving Minimal Supersymmetric Standard Model (MSSM).
We review the features of top-quark decays and loop-induced effects in the production cross section and CP-violating observables of e+e- -> t t-bar which are specific to the R-parity conserving Minimal Supersymmetric Standard Model (MSSM).
△ Less
Submitted 21 March, 2000; v1 submitted 13 March, 2000;
originally announced March 2000.
-
Top Dipole Form Factors and Loop-induced CP-violation in Supersymmetry
Authors:
W. Hollik,
J. I. Illana,
S. Rigolin,
C. Schappacher,
D. Stöckinger
Abstract:
The one-loop Minimal Supersymmetric Standard Model (MSSM) contributions to the weak and electromagnetic dipole form factors of the top quark are presented. Far from the Z peak, they are not sufficient to account for all the new physics effects. In the context of the calculation of the process e^+e^- -> t tbar to one loop in the MSSM, we compare the impact on the phenomenology of the CP-violating…
▽ More
The one-loop Minimal Supersymmetric Standard Model (MSSM) contributions to the weak and electromagnetic dipole form factors of the top quark are presented. Far from the Z peak, they are not sufficient to account for all the new physics effects. In the context of the calculation of the process e^+e^- -> t tbar to one loop in the MSSM, we compare the impact on the phenomenology of the CP-violating dipole form factors of the top quark with the contribution from CP-violating box graphs. Some exemplificative observables are analyzed and the relevance of both the contributions is pointed out. The one-loop expressions for the electromagnetic and weak dipole form factors in a general renormalizable theory and the SM and MSSM couplings and conventions are also given.
△ Less
Submitted 31 October, 2001; v1 submitted 9 December, 1998;
originally announced December 1998.
-
Dipole Form Factors and Loop-induced CP-violation in Supersymmetry
Authors:
W. Hollik,
J. I. Illana,
S. Rigolin,
C. Schappacher,
D. Stöckinger
Abstract:
The one-loop Minimal Supersymmetric Standard Model (MSSM) contributions to the weak and electromagnetic dipole form factors of heavy fermions are reviewed. For the $Z$ boson on shell, the weak-magnetic and weak-electric dipole moments of the $τ$ lepton and the $b$ quark can be defined and directly connected to observables. But far from the $Z$ peak, the weak and electromagnetic dipole form facto…
▽ More
The one-loop Minimal Supersymmetric Standard Model (MSSM) contributions to the weak and electromagnetic dipole form factors of heavy fermions are reviewed. For the $Z$ boson on shell, the weak-magnetic and weak-electric dipole moments of the $τ$ lepton and the $b$ quark can be defined and directly connected to observables. But far from the $Z$ peak, the weak and electromagnetic dipole form factors are not enough to account for all the new physics effects. In the context of the calculation of the process $e^+e^-\to t\bar{t}$ to one loop in the MSSM, we compare the impact on the phenomenology of the CP-violating dipole form factors of the top quark with the contribution from CP-violating box graphs. Some exemplificative observables are analyzed and the relevance of both the contributions is pointed out. The set of tensor integrals employed, the one-loop expressions for the electromagnetic and weak dipole form factors in a general renormalizable theory and the SM and MSSM couplings and conventions are also given.
△ Less
Submitted 31 October, 2001; v1 submitted 25 August, 1998;
originally announced August 1998.
-
Supersymmetric one-loop corrections to the process e^+e^- to f fbar
Authors:
W. Hollik,
C. Schappacher
Abstract:
Radiative one-loop corrections to fermion pair production in $e^+e^-$ annihilation are calculated in the Minimal Supersymmetric Standard Model (MSSM). The size of the non-standard corrections is discussed for the process e^+e^- to mu^+mu^- and e^+e^- to hadrons at LEP2 energies and for e^+e^- to t tbar at a high energy e^+e^- collider. The relative difference between the predictions of the MSSM…
▽ More
Radiative one-loop corrections to fermion pair production in $e^+e^-$ annihilation are calculated in the Minimal Supersymmetric Standard Model (MSSM). The size of the non-standard corrections is discussed for the process e^+e^- to mu^+mu^- and e^+e^- to hadrons at LEP2 energies and for e^+e^- to t tbar at a high energy e^+e^- collider. The relative difference between the predictions of the MSSM and the Standard Model is typically below 10%.
△ Less
Submitted 23 February, 1999; v1 submitted 20 July, 1998;
originally announced July 1998.
