Showing 1–11 of 11 results for author: Schülzgen, A

Compact omnidirectional multicore fiber-based vector bending sensor

Authors: Josu Amorebieta, Angel Ortega-Gomez, Gaizka Durana, Rubén Fernández, Enrique Antonio-Lopez, Axel Schülzgen, Joseba Zubia, Rodrigo Amezcua-Correa, Joel Villatoro

Abstract: We propose and demonstrate a compact and simple vector bending sensor capable of distinguishing any direction and amplitude with high accuracy. The sensor consists of a short segment of asymmetric multicore fiber (MCF) fusion spliced to a standard single mode fiber. The reflection spectrum of such a structure shifts and shrinks in specific manners depending on the direction in which the MCF is ben… ▽ More We propose and demonstrate a compact and simple vector bending sensor capable of distinguishing any direction and amplitude with high accuracy. The sensor consists of a short segment of asymmetric multicore fiber (MCF) fusion spliced to a standard single mode fiber. The reflection spectrum of such a structure shifts and shrinks in specific manners depending on the direction in which the MCF is bent. By monitoring simultaneously wavelength shift and light power variations, the amplitude and bend direction of the MCF can be unmistakably measured in any orientation, from 0° to 360°. The bending sensor proposed here is highly sensitive even for small bending angles (below 1°). △ Less

Submitted 7 February, 2024; originally announced February 2024.

Sensitivity-optimized strongly coupled multicore fiber-based thermometer

Authors: Josu Amorebieta, Ángel Ortega-Gómez, Rubén Fernández, José Enrique Antonio-López, Axel Schülzgen, Joseba Zubia, Rodrigo Amezcua-Correa, Gaizka Durana, Joel Villatoro

Abstract: In this paper, we report on a multicore fiber-based (MCF) temperature sensor that operates in a wide thermal range and that is robustly packaged to withstand harsh environments. To develop the sensor, the fundamentals concerning the effect of temperature on such fibers have been analyzed in detail to predict the most temperature sensitive MCF geometry. Thanks to it, the device, which operates in r… ▽ More In this paper, we report on a multicore fiber-based (MCF) temperature sensor that operates in a wide thermal range and that is robustly packaged to withstand harsh environments. To develop the sensor, the fundamentals concerning the effect of temperature on such fibers have been analyzed in detail to predict the most temperature sensitive MCF geometry. Thanks to it, the device, which operates in reflection mode and consists of a short segment of strongly coupled MCF fusion spliced to a standard single mode fiber, shows higher sensitivity than other devices with identical configuration. Regarding its packaging, it consists of an inner ceramic and two outer metallic tubes to provide rigidity and protection against impacts or dirt. The device was calibrated for a thermal range from 25 C to 900 C and a K-type thermocouple was used as reference. Our results suggest that the manufactured optical thermometer is as accurate as the electronic one, reaching a sensitivity up to 29.426 pm/C with the advantage of being passive, compact and easy to fabricate and interrogate. Therefore, we believe this device is appealing for industrial applications that require highly sensitive temperature sensing in very demanding environments, and that the analysis included in this work could be analogously applied to develop sensitivity-optimized devices for other parameters of interest. △ Less

Submitted 6 February, 2024; originally announced February 2024.

Composed multicore fiber structure for direction-sensitive curvature monitoring

Authors: Joel Villatoro, Josu Amorebieta, Ángel Ortega-Gómez, José Enrique Antonio-López, Joseba Zubia, Axel Schülzgen, Rodrigo Amezcua-Correa

Abstract: The present work deals with a curvature sensor that consists of two segments of asymmetric multicore fiber (MCF) fusion spliced with standard single mode fiber (SMF). The MCF comprises three strongly coupled cores; one of such cores is at the geometrical center of the MCF. The two segments of MCF are short, have different lengths (less than 2 cm each), and are rotated 180 degrees with respect to e… ▽ More The present work deals with a curvature sensor that consists of two segments of asymmetric multicore fiber (MCF) fusion spliced with standard single mode fiber (SMF). The MCF comprises three strongly coupled cores; one of such cores is at the geometrical center of the MCF. The two segments of MCF are short, have different lengths (less than 2 cm each), and are rotated 180 degrees with respect to each other. The fabrication of the sensor was carried out with a fusion splicing machine that has the means for rotating optical fibers. It is demonstrated that the sensor behaves as two SMF-MCF-SMF structures in series, and consequently, it has enhanced sensitivity. The device proposed here can be used to sense the direction and amplitude of curvature by monitoring either wavelength shifts or intensity changes. In the latter case, high curvature sensitivity was observed. The device can also be used for the development of other highly sensitive sensors to monitor, for example, vibrations, force, pressure, or any other parameter that induces periodic or local curvature or bending to the MCF segments. △ Less

Submitted 6 February, 2024; originally announced February 2024.

Highly sensitive multicore fiber accelerometer for low frequency vibration sensing

Authors: Josu Amorebieta, Ángel Ortega-Gómez, Gaizka Durana, Rubén Fernández, José Enrique Antonio-López, Axel Schülzgen, Joseba Zubia, Rodrigo Amezcua-Correa, Joel Villatoro

Abstract: We report on a compact, highly sensitive all-fiber accelerometer suitable for low frequency and low amplitude vibration sensing. The sensing elements in the device are two short segments of strongly coupled asymmetric multicore fiber (MCF) fusion spliced at 180° with respect to each other. Such segments of MCF are sandwiched between standard single mode fibers. The reflection spectrum of the devic… ▽ More We report on a compact, highly sensitive all-fiber accelerometer suitable for low frequency and low amplitude vibration sensing. The sensing elements in the device are two short segments of strongly coupled asymmetric multicore fiber (MCF) fusion spliced at 180° with respect to each other. Such segments of MCF are sandwiched between standard single mode fibers. The reflection spectrum of the device exhibits a narrow spectrum whose height and position in wavelength changes when it is subjected to vibrations. The interrogation of the accelerometer was carried out by a spectrometer and a photodetector to measure simultaneously wavelength shift and light power variations. The device was subjected to a wide range of vibration frequencies, from 1 mHz to 30 Hz, and accelerations from 0.76 mg to 29.64 mg, and performed linearly, with a sensitivity of 2.213 nW/mg. Therefore, we believe the accelerometer reported here may represent an alternative to existing electronic and optical accelerometers, especially for low frequency and amplitude vibrations, thanks to its compactness, simplicity, cost-effectiveness, implementation easiness and high sensitivity. △ Less

Submitted 6 February, 2024; originally announced February 2024.

Unsupervised Full-color Cellular Image Reconstruction through Disordered Optical Fiber

Authors: Xiaowen Hu, Jian Zhao, Jose Enrique Antonio-Lopez, Rodrigo Amezcua Correa, Axel Schulzgen

Abstract: Recent years have witnessed the tremendous development of fusing fiber-optic imaging with supervised deep learning to enable high-quality imaging of hard-to-reach areas. Nevertheless, the supervised deep learning method imposes strict constraints on fiber-optic imaging systems, where the input objects and the fiber outputs have to be collected in pairs. To unleash the full potential of fiber-optic… ▽ More Recent years have witnessed the tremendous development of fusing fiber-optic imaging with supervised deep learning to enable high-quality imaging of hard-to-reach areas. Nevertheless, the supervised deep learning method imposes strict constraints on fiber-optic imaging systems, where the input objects and the fiber outputs have to be collected in pairs. To unleash the full potential of fiber-optic imaging, unsupervised image reconstruction is in demand. Unfortunately, neither optical fiber bundles nor multimode fibers can achieve a point-to-point transmission of the object with a high sampling density, as is a prerequisite for unsupervised image reconstruction. The recently proposed disordered fibers offer a new solution based on the transverse Anderson localization. Here, we demonstrate unsupervised full-color imaging with a cellular resolution through a meter-long disordered fiber in both transmission and reflection modes. The unsupervised image reconstruction consists of two stages. In the first stage, we perform a pixel-wise standardization on the fiber outputs using the statistics of the objects. In the second stage, we recover the fine details of the reconstructions through a generative adversarial network. Unsupervised image reconstruction does not need paired images, enabling a much more flexible calibration under various conditions. Our new solution achieves full-color high-fidelity cell imaging within a working distance of at least 4 mm by only collecting the fiber outputs after an initial calibration. High imaging robustness is also demonstrated when the disordered fiber is bent with a central angle of 60°. Moreover, the cross-domain generality on unseen objects is shown to be enhanced with a diversified object set. △ Less

Submitted 21 December, 2022; originally announced December 2022.

Adaptive Inverse Map**: A Model-free Semi-supervised Learning Approach towards Robust Imaging through Dynamic Scattering Media

Authors: Xiaowen Hu, Jian Zhao, Jose Enrique Antonio-Lopez, Stefan Gausmann, Rodrigo Amezcua Correa, Axel Schulzgen

Abstract: Imaging through scattering media is a useful and yet demanding task since it involves solving for an inverse map** from speckle images to object images. It becomes even more challenging when the scattering medium undergoes dynamic changes. Various approaches have been proposed in recent years. However, to date, none is able to preserve high image quality without either assuming a finite number o… ▽ More Imaging through scattering media is a useful and yet demanding task since it involves solving for an inverse map** from speckle images to object images. It becomes even more challenging when the scattering medium undergoes dynamic changes. Various approaches have been proposed in recent years. However, to date, none is able to preserve high image quality without either assuming a finite number of sources for dynamic changes, assuming a thin scattering medium, or requiring the access to both ends of the medium. In this paper, we propose an adaptive inverse map** (AIP) method which is flexible regarding any dynamic change and only requires output speckle images after initialization. We show that the inverse map** can be corrected through unsupervised learning if the output speckle images are followed closely. We test the AIP method on two numerical simulations, namely, a dynamic scattering system formulated as an evolving transmission matrix and a telescope with a changing random phase mask at a defocus plane. Then we experimentally apply the AIP method on a dynamic fiber-optic imaging system. Increased robustness in imaging is observed in all three cases. With the excellent performance, we see the great potential of the AIP method in imaging through dynamic scattering media. △ Less

Submitted 18 August, 2021; originally announced August 2021.

Comments: 28 pages, 6 figures

Bright, high-repetition-rate water window soft X-ray source enabled by nonlinear pulse self-compression in an antiresonant hollow-core fibre

Authors: M. Gebhardt, T. Heuermann, R. Klas, C. Liu, A. Kirsche, M. Lenski, Z. Wang, C. Gaida, J. E. Antonio-Lopez, A. Schülzgen, R. Amezcua-Correa, J. Rothhardt, J. Limpert

Abstract: Bright, coherent soft X-ray (SXR) radiation is essential to a variety of applications in fundamental research and life sciences. So far, high photon flux in this spectral region can only be delivered by synchrotrons, free electron lasers or high-order harmonic generation (HHG) sources, which are driven by kHz-class repetition rate lasers with very high peak powers. Here, we establish a novel route… ▽ More Bright, coherent soft X-ray (SXR) radiation is essential to a variety of applications in fundamental research and life sciences. So far, high photon flux in this spectral region can only be delivered by synchrotrons, free electron lasers or high-order harmonic generation (HHG) sources, which are driven by kHz-class repetition rate lasers with very high peak powers. Here, we establish a novel route toward powerful and easy-to-use SXR sources by presenting a compact experiment, in which nonlinear pulse self-compression to the few-cycle regime is combined with phase-matched HHG in a single, helium-filled antiresonant hollow-core fibre (ARHCF). This enables the first 100 kHz-class repetition rate, table-top SXR source, that delivers an application-relevant flux of 2.8*10^6 Photons/s/eV around 300 eV. The fibre-integration of temporal pulse self-compression (leading to the formation of the necessary strong-field waveforms) and pressure controlled phase-matching will allow compact, high repetition rate laser technology, including commercially available systems, to drive simple and cost-effective, coherent high-flux SXR sources. △ Less

Submitted 16 February, 2021; v1 submitted 23 September, 2020; originally announced September 2020.

Comments: 12 pages, 3 figures

Journal ref: Light Sci Appl 10, 36 (2021)

Disordered Anderson Localization Optical Fibers for Image Transport - A Review

Authors: Arash Mafi, John Ballato, Karl W. Koch, Axel Schulzgen

Abstract: Disordered optical fibers show novel waveguiding properties, enabled by the transverse Anderson localization of light, and are used for image transport. The strong transverse scattering from the transversely disordered refractive index structure results in transversely confined modes that can freely propagate in the longitudinal direction. In some sense, an Anderson localization disordered fiber b… ▽ More Disordered optical fibers show novel waveguiding properties, enabled by the transverse Anderson localization of light, and are used for image transport. The strong transverse scattering from the transversely disordered refractive index structure results in transversely confined modes that can freely propagate in the longitudinal direction. In some sense, an Anderson localization disordered fiber behave like a large-core multimode optical fiber, with the advantage, that most modes are highly localized in the transverse plane, so any point in the cross section of the fiber can be used for localized beam transport. This property has been used for high-quality transportation of intensity patterns and images in these optical fibers. This review covers the basics and the history of the transverse Anderson localization in disordered optical fibers and captures the recent progress in imaging applications using these optical fibers. △ Less

Submitted 1 February, 2019; originally announced February 2019.

Deep Learning Cell Imaging through Anderson Localizing Optical Fibre

Authors: Jian Zhao, Yangyang Sun, Hongbo Zhu, Zheyuan Zhu, Jose Enrique Antonio-Lopez, Rodrigo Amezcua Correa, Shuo Pang, Axel Schulzgen

Abstract: We demonstrate a deep-learning-based fibre imaging system which can transfer real-time artifact-free cell images through a meter-long Anderson localizing optical fibre. The cell samples are illuminated by an incoherent LED light source. A deep convolutional neural network is applied to the image reconstruction process. The network training uses data generated by a set-up with straight fibre at roo… ▽ More We demonstrate a deep-learning-based fibre imaging system which can transfer real-time artifact-free cell images through a meter-long Anderson localizing optical fibre. The cell samples are illuminated by an incoherent LED light source. A deep convolutional neural network is applied to the image reconstruction process. The network training uses data generated by a set-up with straight fibre at room temperature (~20 °C) but can be utilized directly for high fidelity reconstruction of cell images that are transported through fibre with a few degrees bend and/or fibre with segments heated up to 50 °C. In addition, cell images located several millimeters away from the bare fibre end can be transported and recovered successfully without the assistance of any distal optics. We further evidence that the trained neural network is able to reconstruct the images of cells which are never used in the training process and feature very different morphology. △ Less

Submitted 6 July, 2019; v1 submitted 3 December, 2018; originally announced December 2018.

Comments: 14 pages,7 figures

Deep-UV to mid-IR supercontinuum generation driven by mid-IR ultrashort pulses in a gas-filled fiber

Authors: Abubakar I. Adamu, Md. Selim Habib, Christian R. Petersen, J. Enrique Antonio-Lopez, Binbin Zhou, Axel Schülzgen, Rodrigo Amezcua-Correa, Ole Bang, Christos Markos

Abstract: Supercontinuum (SC) generation based on ultrashort pulse compression constitutes one of the most promising technologies towards an ultra-wide bandwidth, high-brightness and spatially coherent light sources for applications such as spectroscopy and microscopy. Here, multi-octave SC generation in a gas-filled hollow-core antiresonant fiber (HC-ARF) is reported spanning from 200 nm in the deep ultrav… ▽ More Supercontinuum (SC) generation based on ultrashort pulse compression constitutes one of the most promising technologies towards an ultra-wide bandwidth, high-brightness and spatially coherent light sources for applications such as spectroscopy and microscopy. Here, multi-octave SC generation in a gas-filled hollow-core antiresonant fiber (HC-ARF) is reported spanning from 200 nm in the deep ultraviolet (DUV) to 4000 nm in the mid-infrared (mid-IR). A measured average output power of 5 mW was obtained by pum** at the center wavelength of the first anti-resonance transmission window (2460 nm) with ~100 fs pulses and an injected pulse energy of ~7-8 μJ. The mechanism behind the extreme spectral broadening relies upon intense soliton-plasma nonlinear dynamics which leads to efficient soliton self-compression and phase-matched dispersive wave (DW) emission in the DUV region. The strongest DW is observed at 275 nm having an estimated pulse energy of 1.42 μJ, corresponding to 28.4 % of the total output energy. Furthermore, the effect of changing the pump pulse energy and gas pressure on the nonlinear dynamics and their direct impact on SC generation was investigated. The current work paves a new way towards novel investigations of gas-based ultrafast nonlinear optics in the emerging mid-IR spectral regime. △ Less

Submitted 9 May, 2018; v1 submitted 8 May, 2018; originally announced May 2018.

Femtosecond pulsed laser micro-machining of glass substrates with application to microfluidic devices

Authors: M. S. Giridhar, Kibyung Seong, Axel Schülzgen, Pramod Khulbe, Nasser Peyghambarian, Masud Mansuripur

Abstract: We describe a technique for surface and sub-surface micro-machining of glass substrates using tightly focused femtosecond laser pulses at a wavelength of 1660 nm. Although silicate glass is normally transparent at this wavelength, the extremely high intensity of the focused beam causes multi-photon absorption, resulting in localized ablation of the glass substrate. Ablation is strictly confined to… ▽ More We describe a technique for surface and sub-surface micro-machining of glass substrates using tightly focused femtosecond laser pulses at a wavelength of 1660 nm. Although silicate glass is normally transparent at this wavelength, the extremely high intensity of the focused beam causes multi-photon absorption, resulting in localized ablation of the glass substrate. Ablation is strictly confined to the vicinity of focus, leaving the rest of the substrate unaffected. We exploit this phenomenon to drill a micro-hole through a thin vertical wall that separates two adjacent pits machined by the same laser in a glass plate. A salient feature of pulsed laser micro-machining, therefore, is its ability to drill sub-surface tunnels and canals into glass substrates, a process that requires multiple steps in standard lithography. To demonstrate a potential application of this micro-machining technique, we have fabricated simple micro-fluidic structures on a glass plate. To prevent the evaporation of liquids in open micro-channels and micro-chambers thus fabricated requires a cover plate that seals the device by making point-to-point contact with the flat surface of the substrate. This point-to-point contacting is essential if the fluids are to remain confined within their various channels and chambers on the chip, without leaking into neighboring regions. Methods of protecting and sealing the micro-machined structures for microfluidic applications are also discussed. △ Less

Submitted 27 August, 2017; originally announced August 2017.

Comments: 14 pages, 8 figures, 12 references

Journal ref: Published in Applied Optics 43, pp4584-4589 (2004)