-
ANDES, the high-resolution spectrograph for the ELT: RIZ Spectrograph preliminary design
Authors:
Bruno Chazelas,
Yevgeniy Ivanisenko,
Audrey Lanotte,
Pablo Santos Diaz,
Ludovic Genolet,
Michael Sordet,
Ian Hughes,
Christophe Lovis,
Tobias M. Schmidt,
Manuel Amate,
José Peñate Castro,
Afrodisio Vega Moreno,
Fabio Tenegi,
Roberto Simoes,
Jonay I. González Hernández,
María Rosa Zapatero Osorio,
Javier Piqueras,
Tomás Belenguer Dávila,
Rocío Calvo Ortega,
Roberto Varas González,
Luis Miguel González Fernández,
Pedro J. Amado,
Jonathan Kern,
Frank Dionies,
Svend-Marian Bauer
, et al. (22 additional authors not shown)
Abstract:
We present here the preliminary design of the RIZ module, one of the visible spectrographs of the ANDES instrument 1. It is a fiber-fed high-resolution, high-stability spectrograph. Its design follows the guidelines of successful predecessors such as HARPS and ESPRESSO. In this paper we present the status of the spectrograph at the preliminary design stage. The spectrograph will be a warm, vacuum-…
▽ More
We present here the preliminary design of the RIZ module, one of the visible spectrographs of the ANDES instrument 1. It is a fiber-fed high-resolution, high-stability spectrograph. Its design follows the guidelines of successful predecessors such as HARPS and ESPRESSO. In this paper we present the status of the spectrograph at the preliminary design stage. The spectrograph will be a warm, vacuum-operated, thermally controlled and fiber-fed echelle spectrograph. Following the phase A design, the huge etendue of the telescope will be reformed in the instrument with a long slit made of smaller fibers. We discuss the system design of the spectrographs system.
△ Less
Submitted 26 June, 2024;
originally announced June 2024.
-
MORFEO enters final design phase
Authors:
Lorenzo Busoni,
Guido Agapito,
Alessandro Ballone,
Alfio Puglisi,
Alexander Goncharov,
Amedeo Petrella,
Amico Di Cianno,
Andrea Balestra,
Andrea Baruffolo,
Andrea Bianco,
Andrea Di Dato,
Angelo Valentini,
Benedetta Di Francesco,
Benoit Sassolas,
Bernardo Salasnich,
Carmelo Arcidiacono,
Cedric Plantet,
Christian Eredia,
Daniela Fantinel,
Danilo Selvestrel,
Deborah Malone,
Demetrio Magrin,
Domenico D'Auria,
Edoardo Redaelli,
Elena Carolo
, et al. (59 additional authors not shown)
Abstract:
MORFEO (Multi-conjugate adaptive Optics Relay For ELT Observations, formerly MAORY), the MCAO system for the ELT, will provide diffraction-limited optical quality to the large field camera MICADO. MORFEO has officially passed the Preliminary Design Review and it is entering the final design phase. We present the current status of the project, with a focus on the adaptive optics system aspects and…
▽ More
MORFEO (Multi-conjugate adaptive Optics Relay For ELT Observations, formerly MAORY), the MCAO system for the ELT, will provide diffraction-limited optical quality to the large field camera MICADO. MORFEO has officially passed the Preliminary Design Review and it is entering the final design phase. We present the current status of the project, with a focus on the adaptive optics system aspects and expected milestones during the next project phase.
△ Less
Submitted 13 October, 2023;
originally announced October 2023.
-
Lateral constraint for thin glass shell: analysis of the requirements and conceptual design for a segmented active mirror
Authors:
Marcello Agostino Scalera,
Runa Briguglio,
Ciro Del Vecchio,
Marco Xompero,
Marco Riva
Abstract:
The latest high-performance telescopes for deep space observation employ very large primary mirrors that are made of smaller segments, like the JWST which employs monolithic beryllium hexagonal segments. A very promising development stage of these systems is to make them active and to operate on their reflective surfaces to change their shape and compensate for aberrations as well as to perform a…
▽ More
The latest high-performance telescopes for deep space observation employ very large primary mirrors that are made of smaller segments, like the JWST which employs monolithic beryllium hexagonal segments. A very promising development stage of these systems is to make them active and to operate on their reflective surfaces to change their shape and compensate for aberrations as well as to perform a very precise alignment. This is possible by employing a reference body that stores actuators to modify the shape of the shell, like in the SPLATT project where voice coil actuators are used. However, the lack of physical contact between the main body and shell places, along with the many advantages related to the physical decoupling of the two bodies, some concerns related to the retaining of the shell under all the possible acceleration conditions affecting the system during the mission lifetime. This paper aims to study the acceleration environment affecting the spacecraft during its lifetime and to use it as a baseline for operational requirements of a retaining system for the shells. Any solution is selected in this paper to leave complete freedom for the development of a constraining system, just some are qualitatively discussed.
△ Less
Submitted 1 February, 2023;
originally announced February 2023.
-
Contactless actuators and pyramid wavefront sensor, the SPLATT concept for space active optics: an overview of the project and the last laboratory results
Authors:
Runa Briguglio,
Marco Xompero,
Marcello Scalera,
Marco Riva,
Ciro Del Vecchio,
Luca Carbonaro,
Carmelo Arcidiacono,
Guido Agapito,
Enrico Pinna,
Alessandro Terreri,
Fernando Pedichini,
Riccardo Muradore,
Matteo Tintori,
Daniele Gallieni Roberto Biasi,
Christian Patauner,
Alessandro Zuccaro Marchi
Abstract:
In the last few years the concept of an active space telescope has been greatly developed, to meet demanding requirements with a substantial reduction of tolerances, risks and costs. This is the frame of the LATT project (an ESA TRP) and its follow-up SPLATT (an INAF funded R&D project). Within the SPLATT activities, we outline a novel approach and investigate, both via simulations and in the opti…
▽ More
In the last few years the concept of an active space telescope has been greatly developed, to meet demanding requirements with a substantial reduction of tolerances, risks and costs. This is the frame of the LATT project (an ESA TRP) and its follow-up SPLATT (an INAF funded R&D project). Within the SPLATT activities, we outline a novel approach and investigate, both via simulations and in the optical laboratory, two main elements: an active segmented primary with contactless actuators and a pyramid wavefront sensor (PWFS) to drive the correction chain. The key point is the synergy between them: the sensitivity of the PWFS and the intrinsic stability of a contactless-actuated mirror segment.
Voice-coil, contactless actuators are in facts a natural decoupling layer between the payload and the optical surface and can suppress the high frequency vibration as we verified in the lab. We subjected a 40 cm diameter prototype with 19 actuators to an externally injected vibration spectrum; we then measured optically the reduction of vibrations when the optical surface is floating controlled by the actuators, thus validating the concept at the first stage of the design.
The PWFS, which is largely adopted on ground-based telescope, is a pupil-conjugated sensor and offers a user-selectable sampling and capture range, in order to match different use cases; it is also more sensitive than Shack-Hartmann sensor especially at the low-mid spatial scales. We run a set of numerical simulations with the PWFS measuring the misalignment and phase steps of a JWST-like primary mirrors: we investigated the PWFS sensitivity in the sub-nanometer regime in presence of photon and detector noise, and with guide star magnitudes in the range 8 to 14.
In the paper we discuss the outcomes of the project and present a possible roadmap for further developments.
△ Less
Submitted 1 February, 2023;
originally announced February 2023.
