-
Distributed Quantum Computing in Silicon
Authors:
Photonic Inc,
:,
Francis Afzal,
Mohsen Akhlaghi,
Stefanie J. Beale,
Olinka Bedroya,
Kristin Bell,
Laurent Bergeron,
Kent Bonsma-Fisher,
Polina Bychkova,
Zachary M. E. Chaisson,
Camille Chartrand,
Chloe Clear,
Adam Darcie,
Adam DeAbreu,
Colby DeLisle,
Lesley A. Duncan,
Chad Dundas Smith,
John Dunn,
Amir Ebrahimi,
Nathan Evetts,
Daker Fernandes Pinheiro,
Patricio Fuentes,
Tristen Georgiou,
Biswarup Guha
, et al. (47 additional authors not shown)
Abstract:
Commercially impactful quantum algorithms such as quantum chemistry and Shor's algorithm require a number of qubits and gates far beyond the capacity of any existing quantum processor. Distributed architectures, which scale horizontally by networking modules, provide a route to commercial utility and will eventually surpass the capability of any single quantum computing module. Such processors con…
▽ More
Commercially impactful quantum algorithms such as quantum chemistry and Shor's algorithm require a number of qubits and gates far beyond the capacity of any existing quantum processor. Distributed architectures, which scale horizontally by networking modules, provide a route to commercial utility and will eventually surpass the capability of any single quantum computing module. Such processors consume remote entanglement distributed between modules to realize distributed quantum logic. Networked quantum computers will therefore require the capability to rapidly distribute high fidelity entanglement between modules. Here we present preliminary demonstrations of some key distributed quantum computing protocols on silicon T centres in isotopically-enriched silicon. We demonstrate the distribution of entanglement between modules and consume it to apply a teleported gate sequence, establishing a proof-of-concept for T centres as a distributed quantum computing and networking platform.
△ Less
Submitted 3 June, 2024;
originally announced June 2024.
-
Cross-Language Assessment of Mathematical Capability of ChatGPT
Authors:
Gargi Sathe,
Aneesh Shamraj,
Aditya Surve,
Nahush Patil,
Kumkum Saxena
Abstract:
This paper presents an evaluation of the mathematical capability of ChatGPT across diverse languages like Hindi, Gujarati, and Marathi. ChatGPT, based on GPT-3.5 by OpenAI, has garnered significant attention for its natural language understanding and generation abilities. However, its performance in solving mathematical problems across multiple natural languages remains a comparatively unexplored…
▽ More
This paper presents an evaluation of the mathematical capability of ChatGPT across diverse languages like Hindi, Gujarati, and Marathi. ChatGPT, based on GPT-3.5 by OpenAI, has garnered significant attention for its natural language understanding and generation abilities. However, its performance in solving mathematical problems across multiple natural languages remains a comparatively unexplored area, especially in regional Indian languages. In this paper, we explore those capabilities as well as using chain-of-thought prompting to figure out if it increases the accuracy of responses as much as it does in the English language and provide insights into the current limitations.
△ Less
Submitted 18 May, 2024;
originally announced May 2024.
-
Fill in the ____ (a Diffusion-based Image Inpainting Pipeline)
Authors:
Eyoel Gebre,
Krishna Saxena,
Timothy Tran
Abstract:
Image inpainting is the process of taking an image and generating lost or intentionally occluded portions. Inpainting has countless applications including restoring previously damaged pictures, restoring the quality of images that have been degraded due to compression, and removing unwanted objects/text. Modern inpainting techniques have shown remarkable ability in generating sensible completions…
▽ More
Image inpainting is the process of taking an image and generating lost or intentionally occluded portions. Inpainting has countless applications including restoring previously damaged pictures, restoring the quality of images that have been degraded due to compression, and removing unwanted objects/text. Modern inpainting techniques have shown remarkable ability in generating sensible completions for images with mask occlusions. In our paper, an overview of the progress of inpainting techniques will be provided, along with identifying current leading approaches, focusing on their strengths and weaknesses. A critical gap in these existing models will be addressed, focusing on the ability to prompt and control what exactly is generated. We will additionally justify why we think this is the natural next progressive step that inpainting models must take, and provide multiple approaches to implementing this functionality. Finally, we will evaluate the results of our approaches by qualitatively checking whether they generate high-quality images that correctly inpaint regions with the objects that they are instructed to produce.
△ Less
Submitted 24 March, 2024;
originally announced March 2024.
-
Interactive singing melody extraction based on active adaptation
Authors:
Kavya Ranjan Saxena,
Vipul Arora
Abstract:
Extraction of predominant pitch from polyphonic audio is one of the fundamental tasks in the field of music information retrieval and computational musicology. To accomplish this task using machine learning, a large amount of labeled audio data is required to train the model. However, a classical model pre-trained on data from one domain (source), e.g., songs of a particular singer or genre, may n…
▽ More
Extraction of predominant pitch from polyphonic audio is one of the fundamental tasks in the field of music information retrieval and computational musicology. To accomplish this task using machine learning, a large amount of labeled audio data is required to train the model. However, a classical model pre-trained on data from one domain (source), e.g., songs of a particular singer or genre, may not perform comparatively well in extracting melody from other domains (target). The performance of such models can be boosted by adapting the model using very little annotated data from the target domain. In this work, we propose an efficient interactive melody adaptation method. Our method selects the regions in the target audio that require human annotation using a confidence criterion based on normalized true class probability. The annotations are used by the model to adapt itself to the target domain using meta-learning. Our method also provides a novel meta-learning approach that handles class imbalance, i.e., a few representative samples from a few classes are available for adaptation in the target domain. Experimental results show that the proposed method outperforms other adaptive melody extraction baselines. The proposed method is model-agnostic and hence can be applied to other non-adaptive melody extraction models to boost their performance. Also, we released a Hindustani Alankaar and Raga (HAR) dataset containing 523 audio files of about 6.86 hours of duration intended for singing melody extraction tasks.
△ Less
Submitted 12 February, 2024;
originally announced February 2024.
-
Leveraging CNNs and Ensemble Learning for Automated Disaster Image Classification
Authors:
Archit Rathod,
Veer Pariawala,
Mokshit Surana,
Kumkum Saxena
Abstract:
Natural disasters act as a serious threat globally, requiring effective and efficient disaster management and recovery. This paper focuses on classifying natural disaster images using Convolutional Neural Networks (CNNs). Multiple CNN architectures were built and trained on a dataset containing images of earthquakes, floods, wildfires, and volcanoes. A stacked CNN ensemble approach proved to be th…
▽ More
Natural disasters act as a serious threat globally, requiring effective and efficient disaster management and recovery. This paper focuses on classifying natural disaster images using Convolutional Neural Networks (CNNs). Multiple CNN architectures were built and trained on a dataset containing images of earthquakes, floods, wildfires, and volcanoes. A stacked CNN ensemble approach proved to be the most effective, achieving 95% accuracy and an F1 score going up to 0.96 for individual classes. Tuning hyperparameters of individual models for optimization was critical to maximize the models' performance. The stacking of CNNs with XGBoost acting as the meta-model utilizes the strengths of the CNN and ResNet models to improve the overall accuracy of the classification. Results obtained from the models illustrated the potency of CNN-based models for automated disaster image classification. This lays the foundation for expanding these techniques to build robust systems for disaster response, damage assessment, and recovery management.
△ Less
Submitted 22 November, 2023;
originally announced November 2023.
-
Deep domain adaptation for polyphonic melody extraction
Authors:
Kavya Ranjan Saxena,
Vipul Arora
Abstract:
Extraction of the predominant pitch from polyphonic audio is one of the fundamental tasks in the field of music information retrieval and computational musicology. To accomplish this task using machine learning, a large amount of labeled audio data is required to train the model that predicts the pitch contour. But a classical model pre-trained on data from one domain (source), e.g, songs of a par…
▽ More
Extraction of the predominant pitch from polyphonic audio is one of the fundamental tasks in the field of music information retrieval and computational musicology. To accomplish this task using machine learning, a large amount of labeled audio data is required to train the model that predicts the pitch contour. But a classical model pre-trained on data from one domain (source), e.g, songs of a particular singer or genre, may not perform comparatively well in extracting melody from other domains (target). The performance of such models can be boosted by adapting the model using some annotated data in the target domain. In this work, we study various adaptation techniques applied to machine learning models for polyphonic melody extraction. Experimental results show that meta-learning-based adaptation performs better than simple fine-tuning. In addition to this, we find that this method outperforms the existing state-of-the-art non-adaptive polyphonic melody extraction algorithms.
△ Less
Submitted 5 April, 2023; v1 submitted 22 October, 2022;
originally announced October 2022.
-
Enhanced Innovized Repair Operator for Evolutionary Multi- and Many-objective Optimization
Authors:
Sukrit Mittal,
Dhish Kumar Saxena,
Kalyanmoy Deb,
Erik Goodman
Abstract:
"Innovization" is a task of learning common relationships among some or all of the Pareto-optimal (PO) solutions in multi- and many-objective optimization problems. Recent studies have shown that a chronological sequence of non-dominated solutions obtained in consecutive iterations during an optimization run also possess salient patterns that can be used to learn problem features to help create ne…
▽ More
"Innovization" is a task of learning common relationships among some or all of the Pareto-optimal (PO) solutions in multi- and many-objective optimization problems. Recent studies have shown that a chronological sequence of non-dominated solutions obtained in consecutive iterations during an optimization run also possess salient patterns that can be used to learn problem features to help create new and improved solutions. In this paper, we propose a machine-learning- (ML-) assisted modelling approach that learns the modifications in design variables needed to advance population members towards the Pareto-optimal set. We then propose to use the resulting ML model as an additional innovized repair (IR2) operator to be applied on offspring solutions created by the usual genetic operators, as a novel mean of improving their convergence properties. In this paper, the well-known random forest (RF) method is used as the ML model and is integrated with various evolutionary multi- and many-objective optimization algorithms, including NSGA-II, NSGA-III, and MOEA/D. On several test problems ranging from two to five objectives, we demonstrate improvement in convergence behaviour using the proposed IR2-RF operator. Since the operator does not demand any additional solution evaluations, instead using the history of gradual and progressive improvements in solutions over generations, the proposed ML-based optimization opens up a new direction of optimization algorithm development with advances in AI and ML approaches.
△ Less
Submitted 21 November, 2020;
originally announced November 2020.
-
TopicBERT for Energy Efficient Document Classification
Authors:
Yatin Chaudhary,
Pankaj Gupta,
Khushbu Saxena,
Vivek Kulkarni,
Thomas Runkler,
Hinrich Schütze
Abstract:
Prior research notes that BERT's computational cost grows quadratically with sequence length thus leading to longer training times, higher GPU memory constraints and carbon emissions. While recent work seeks to address these scalability issues at pre-training, these issues are also prominent in fine-tuning especially for long sequence tasks like document classification. Our work thus focuses on op…
▽ More
Prior research notes that BERT's computational cost grows quadratically with sequence length thus leading to longer training times, higher GPU memory constraints and carbon emissions. While recent work seeks to address these scalability issues at pre-training, these issues are also prominent in fine-tuning especially for long sequence tasks like document classification. Our work thus focuses on optimizing the computational cost of fine-tuning for document classification. We achieve this by complementary learning of both topic and language models in a unified framework, named TopicBERT. This significantly reduces the number of self-attention operations - a main performance bottleneck. Consequently, our model achieves a 1.4x ($\sim40\%$) speedup with $\sim40\%$ reduction in $CO_2$ emission while retaining $99.9\%$ performance over 5 datasets.
△ Less
Submitted 14 October, 2020;
originally announced October 2020.
-
A Novel Column Generation Heuristic for Airline Crew Pairing Optimization with Large-scale Complex Flight Networks
Authors:
Divyam Aggarwal,
Dhish Kumar Saxena,
Saaju Pualose,
Thomas Bäck,
Michael Emmerich
Abstract:
Crew Pairing Optimization (CPO) is critical for an airlines' business viability, given that the crew operating cost is second only to the fuel cost. CPO aims at generating a set of flight sequences (crew pairings) to cover all scheduled flights, at minimum cost, while satisfying several legality constraints. The state-of-the-art heavily relies on relaxing the underlying Integer Programming Problem…
▽ More
Crew Pairing Optimization (CPO) is critical for an airlines' business viability, given that the crew operating cost is second only to the fuel cost. CPO aims at generating a set of flight sequences (crew pairings) to cover all scheduled flights, at minimum cost, while satisfying several legality constraints. The state-of-the-art heavily relies on relaxing the underlying Integer Programming Problem into a Linear Programming Problem, which in turn is solved through the Column Generation (CG) technique. However, with the alarmingly expanding airlines' operations, CPO is marred by the curse of dimensionality, rendering the exact CG-implementations obsolete, and necessitating the heuristic-based CG-implementations. Yet, in literature, the much prevalent large-scale complex flight networks involving multiple { crew bases and/or hub-and-spoke sub-networks, largely remain uninvestigated. This paper proposes a novel CG heuristic, which has enabled the in-house development of an Airline Crew Pairing Optimizer (AirCROP). The efficacy of the heuristic/AirCROP has been tested on real-world, large-scale, complex network instances with over 4,200 flights, 15 crew bases, and multiple hub-and-spoke sub-networks (resulting in billion-plus possible pairings). Notably, this paper has a dedicated focus on the proposed CG heuristic (not the entire AirCROP framework) based on balancing random exploration of pairings; exploitation of domain knowledge (on optimal solution features); and utilization of the past computational & search effort through archiving. Though this paper has an airline context, the proposed CG heuristic may find wider applications across different domains, by serving as a template on how to utilize domain knowledge to better tackle combinatorial optimization problems.
△ Less
Submitted 2 July, 2021; v1 submitted 18 May, 2020;
originally announced May 2020.
-
On Learning Combinatorial Patterns to Assist Large-Scale Airline Crew Pairing Optimization
Authors:
Divyam Aggarwal,
Yash Kumar Singh,
Dhish Kumar Saxena
Abstract:
Airline Crew Pairing Optimization (CPO) aims at generating a set of legal flight sequences (crew pairings), to cover an airline's flight schedule, at minimum cost. It is usually performed using Column Generation (CG), a mathematical programming technique for guided search-space exploration. CG exploits the interdependencies between the current and the preceding CG-iteration for generating new vari…
▽ More
Airline Crew Pairing Optimization (CPO) aims at generating a set of legal flight sequences (crew pairings), to cover an airline's flight schedule, at minimum cost. It is usually performed using Column Generation (CG), a mathematical programming technique for guided search-space exploration. CG exploits the interdependencies between the current and the preceding CG-iteration for generating new variables (pairings) during the optimization-search. However, with the unprecedented scale and complexity of the emergent flight networks, it has become imperative to learn higher-order interdependencies among the flight-connection graphs, and utilize those to enhance the efficacy of the CPO. In first of its kind and what marks a significant departure from the state-of-the-art, this paper proposes a novel adaptation of the Variational Graph Auto-Encoder for learning plausible combinatorial patterns among the flight-connection data obtained through the search-space exploration by an Airline Crew Pairing Optimizer, AirCROP (developed by the authors and validated by the research consortium's industrial sponsor, GE Aviation). The resulting flight-connection predictions are combined on-the-fly using a novel heuristic to generate new pairings for the optimizer. The utility of the proposed approach is demonstrated on large-scale (over 4200 flights), real-world, complex flight-networks of US-based airlines, characterized by multiple hub-and-spoke subnetworks and several crew bases.
△ Less
Submitted 2 May, 2020; v1 submitted 28 April, 2020;
originally announced April 2020.
-
On Initializing Airline Crew Pairing Optimization for Large-scale Complex Flight Networks
Authors:
Divyam Aggarwal,
Dhish Kumar Saxena,
Thomas Bäck,
Michael Emmerich
Abstract:
Crew pairing optimization (CPO) is critically important for any airline, since its crew operating costs are second-largest, next to the fuel-cost. CPO aims at generating a set of flight sequences (crew pairings) covering a flight-schedule, at minimum-cost, while satisfying several legality constraints. For large-scale complex flight networks, billion-plus legal pairings (variables) are possible, r…
▽ More
Crew pairing optimization (CPO) is critically important for any airline, since its crew operating costs are second-largest, next to the fuel-cost. CPO aims at generating a set of flight sequences (crew pairings) covering a flight-schedule, at minimum-cost, while satisfying several legality constraints. For large-scale complex flight networks, billion-plus legal pairings (variables) are possible, rendering their offline enumeration intractable and an exhaustive search for their minimum-cost full flight-coverage subset impractical. Even generating an initial feasible solution (IFS: a manageable set of legal pairings covering all flights), which could be subsequently optimized is a difficult (NP-complete) problem. Though, as part of a larger project the authors have developed a crew pairing optimizer (AirCROP), this paper dedicatedly focuses on IFS-generation through a novel heuristic based on divide-and-cover strategy and Integer Programming. For real-world large and complex flight network datasets (including over 3200 flights and 15 crew bases) provided by GE Aviation, the proposed heuristic shows upto a ten-fold speed improvement over another state-of-the-art approach. Unprecedentedly, this paper presents an empirical investigation of the impact of IFS-cost on the final (optimized) solution-cost, revealing that too low an IFS-cost does not necessarily imply faster convergence for AirCROP or even lower cost for the optimized solution.
△ Less
Submitted 15 March, 2020;
originally announced March 2020.
-
Airline Crew Pairing Optimization Framework for Large Networks with Multiple Crew Bases and Hub-and-Spoke Subnetworks
Authors:
Divyam Aggarwal,
Dhish Kumar Saxena,
Thomas Bäck,
Michael Emmerich
Abstract:
Crew Pairing Optimization aims at generating a set of flight sequences (crew pairings), covering all flights in an airline's flight schedule, at minimum cost, while satisfying several legality constraints. CPO is critically important for airlines' business viability, considering that the crew operating cost is their second-largest expense. It poses an NP-hard combinatorial optimization problem, to…
▽ More
Crew Pairing Optimization aims at generating a set of flight sequences (crew pairings), covering all flights in an airline's flight schedule, at minimum cost, while satisfying several legality constraints. CPO is critically important for airlines' business viability, considering that the crew operating cost is their second-largest expense. It poses an NP-hard combinatorial optimization problem, to tackle which, the state-of-the-art relies on relaxing the underlying Integer Programming Problem (IPP) into a Linear Programming Problem (LPP), solving the latter through Column Generation (CG) technique, and integerization of the resulting LPP solution. However, with the growing scale and complexity of the flight networks (those with a large number of flights, multiple crew bases and/or multiple hub-and-spoke subnetworks), the utility of the conventional CG-practices has become questionable. This paper proposed an Airline Crew Pairing Optimization Framework, AirCROP, whose constitutive modules include the Legal Crew Pairing Generator, Initial Feasible Solution Generator, and an Optimization Engine built on heuristic-based CG-implementation. In this paper, besides the design of AirCROP's modules, insights into important questions related to how these modules interact, which the literature is otherwise silent on, have been shared. These relate to the sensitivity of AirCROP's performance towards: sources of variability over multiple runs for a given problem, initialization method, and termination parameters for LPP-solutioning and IPP-solutioning. The efficacy of the AirCROP has been demonstrated on real-world large-scale and complex flight networks (with over 4200 flights, 15 crew bases, and billion-plus pairings). It is hoped that with the emergence of such complex flight networks, this paper shall serve as an important milestone for affiliated research and applications.
△ Less
Submitted 18 November, 2020; v1 submitted 9 March, 2020;
originally announced March 2020.
-
Real-World Airline Crew Pairing Optimization: Customized Genetic Algorithm versus Column Generation Method
Authors:
Divyam Aggarwal,
Dhish Kumar Saxena,
Thomas Back,
Michael Emmerich
Abstract:
Airline crew pairing optimization problem (CPOP) aims to find a set of flight sequences (crew pairings) that cover all flights in an airline's highly constrained flight schedule at minimum cost. Since crew cost is second only to the fuel cost, CPOP solutioning is critically important for an airline. However, CPOP is NP-hard, and tackling it is quite challenging. The literature suggests, that when…
▽ More
Airline crew pairing optimization problem (CPOP) aims to find a set of flight sequences (crew pairings) that cover all flights in an airline's highly constrained flight schedule at minimum cost. Since crew cost is second only to the fuel cost, CPOP solutioning is critically important for an airline. However, CPOP is NP-hard, and tackling it is quite challenging. The literature suggests, that when the CPOP's scale and complexity is reasonably limited, and an enumeration of all crew pairings is possible, then Metaheuristics are used, predominantly Genetic Algorithms (GAs). Else, Column Generation (CG) based Mixed Integer Programming techniques are used. Notably, as per the literature, a maximum of 45,000 crew pairings have been tackled by GAs. In a significant departure, this paper considers over 800 flights of a US-based large airline (with a monthly network of over 33,000 flights), and tests the efficacy of GAs by enumerating all 400,000+ crew pairings, apriori. Towards it, this paper proposes a domain-knowledge-driven customized-GA. The utility of incorporating domain-knowledge in GA operations, particularly initialization and crossover, is highlighted through suitable experiments. Finally, the proposed GA's performance is compared with a CG-based approach (developed in-house by the authors). Though the latter is found to perform better in terms of solution's cost-quality and run time, it is hoped that this paper will help in better understanding the strengths and limitations of domain-knowledge-driven customizations in GAs, for solving combinatorial optimization problems, including CPOPs.
△ Less
Submitted 27 May, 2023; v1 submitted 8 March, 2020;
originally announced March 2020.
-
TX-Ray: Quantifying and Explaining Model-Knowledge Transfer in (Un-)Supervised NLP
Authors:
Nils Rethmeier,
Vageesh Kumar Saxena,
Isabelle Augenstein
Abstract:
While state-of-the-art NLP explainability (XAI) methods focus on explaining per-sample decisions in supervised end or probing tasks, this is insufficient to explain and quantify model knowledge transfer during (un-)supervised training. Thus, for TX-Ray, we modify the established computer vision explainability principle of 'visualizing preferred inputs of neurons' to make it usable transfer analysi…
▽ More
While state-of-the-art NLP explainability (XAI) methods focus on explaining per-sample decisions in supervised end or probing tasks, this is insufficient to explain and quantify model knowledge transfer during (un-)supervised training. Thus, for TX-Ray, we modify the established computer vision explainability principle of 'visualizing preferred inputs of neurons' to make it usable transfer analysis and NLP. This allows one to analyze, track and quantify how self- or supervised NLP models first build knowledge abstractions in pretraining (1), and then transfer these abstractions to a new domain (2), or adapt them during supervised fine-tuning (3). TX-Ray expresses neurons as feature preference distributions to quantify fine-grained knowledge transfer or adaptation and guide human analysis. We find that, similar to Lottery Ticket based pruning, TX-Ray based pruning can improve test set generalization and that it can reveal how early stages of self-supervision automatically learn linguistic abstractions like parts-of-speech.
△ Less
Submitted 19 June, 2020; v1 submitted 2 December, 2019;
originally announced December 2019.
-
Neural Architectures for Fine-Grained Propaganda Detection in News
Authors:
Pankaj Gupta,
Khushbu Saxena,
Usama Yaseen,
Thomas Runkler,
Hinrich Schütze
Abstract:
This paper describes our system (MIC-CIS) details and results of participation in the fine-grained propaganda detection shared task 2019. To address the tasks of sentence (SLC) and fragment level (FLC) propaganda detection, we explore different neural architectures (e.g., CNN, LSTM-CRF and BERT) and extract linguistic (e.g., part-of-speech, named entity, readability, sentiment, emotion, etc.), lay…
▽ More
This paper describes our system (MIC-CIS) details and results of participation in the fine-grained propaganda detection shared task 2019. To address the tasks of sentence (SLC) and fragment level (FLC) propaganda detection, we explore different neural architectures (e.g., CNN, LSTM-CRF and BERT) and extract linguistic (e.g., part-of-speech, named entity, readability, sentiment, emotion, etc.), layout and topical features. Specifically, we have designed multi-granularity and multi-tasking neural architectures to jointly perform both the sentence and fragment level propaganda detection. Additionally, we investigate different ensemble schemes such as majority-voting, relax-voting, etc. to boost overall system performance. Compared to the other participating systems, our submissions are ranked 3rd and 4th in FLC and SLC tasks, respectively.
△ Less
Submitted 13 September, 2019;
originally announced September 2019.
-
Pentagon at MEDIQA 2019: Multi-task Learning for Filtering and Re-ranking Answers using Language Inference and Question Entailment
Authors:
Hemant Pugaliya,
Karan Saxena,
Shefali Garg,
Sheetal Shalini,
Prashant Gupta,
Eric Nyberg,
Teruko Mitamura
Abstract:
Parallel deep learning architectures like fine-tuned BERT and MT-DNN, have quickly become the state of the art, bypassing previous deep and shallow learning methods by a large margin. More recently, pre-trained models from large related datasets have been able to perform well on many downstream tasks by just fine-tuning on domain-specific datasets . However, using powerful models on non-trivial ta…
▽ More
Parallel deep learning architectures like fine-tuned BERT and MT-DNN, have quickly become the state of the art, bypassing previous deep and shallow learning methods by a large margin. More recently, pre-trained models from large related datasets have been able to perform well on many downstream tasks by just fine-tuning on domain-specific datasets . However, using powerful models on non-trivial tasks, such as ranking and large document classification, still remains a challenge due to input size limitations of parallel architecture and extremely small datasets (insufficient for fine-tuning). In this work, we introduce an end-to-end system, trained in a multi-task setting, to filter and re-rank answers in the medical domain. We use task-specific pre-trained models as deep feature extractors. Our model achieves the highest Spearman's Rho and Mean Reciprocal Rank of 0.338 and 0.9622 respectively, on the ACL-BioNLP workshop MediQA Question Answering shared-task.
△ Less
Submitted 1 July, 2019;
originally announced July 2019.
-
The RGNLP Machine Translation Systems for WAT 2018
Authors:
Atul Kr. Ojha,
Koel Dutta Chowdhury,
Chao-Hong Liu,
Karan Saxena
Abstract:
This paper presents the system description of Machine Translation (MT) system(s) for Indic Languages Multilingual Task for the 2018 edition of the WAT Shared Task. In our experiments, we (the RGNLP team) explore both statistical and neural methods across all language pairs. (We further present an extensive comparison of language-related problems for both the approaches in the context of low-resour…
▽ More
This paper presents the system description of Machine Translation (MT) system(s) for Indic Languages Multilingual Task for the 2018 edition of the WAT Shared Task. In our experiments, we (the RGNLP team) explore both statistical and neural methods across all language pairs. (We further present an extensive comparison of language-related problems for both the approaches in the context of low-resourced settings.) Our PBSMT models were highest score on all automatic evaluation metrics in the English into Telugu, Hindi, Bengali, Tamil portion of the shared task.
△ Less
Submitted 3 December, 2018;
originally announced December 2018.
-
Generalization of Phonon Confinement Model for Interpretation of Raman Line-Shape from Nano-Silicon
Authors:
Manushree Tanwar,
Priyanka Yogi,
Simran Lambora,
Suryakant Mishra,
Shailendra K. Saxena,
Pankaj R Sagdeo,
Alexander S. Krylov,
Rajesh Kumar
Abstract:
A comparative analysis of two Raman line-shape functions has been carried out to validate the true representation of experimentally observed Raman scattering data for semiconducting nanomaterials. A modified form of already existing phonon confinement model incorporates two basic considerations, phonon momentum conservation and shift in zone centre phonon frequency. After incorporation of the abov…
▽ More
A comparative analysis of two Raman line-shape functions has been carried out to validate the true representation of experimentally observed Raman scattering data for semiconducting nanomaterials. A modified form of already existing phonon confinement model incorporates two basic considerations, phonon momentum conservation and shift in zone centre phonon frequency. After incorporation of the above mentioned two factors, a rather symmetric Raman line-shape is generated which is in contrary to the usual asymmetric Raman line-shapes obtained from nanostructured semiconductor. By fitting an experimentally observed Raman scattering data from silicon nanostructures, prepared by metal induced etching, it can be established that the Raman line-shape obtained within the framework of phonon confinement model is a true representative Raman line-shape of sufficiently low dimensions semiconductors.
△ Less
Submitted 30 November, 2017;
originally announced November 2017.
-
3D printable multimaterial cellular auxetics with tunable stiffness
Authors:
Krishna Kumar Saxena,
Raj Das,
Emilio P Calius
Abstract:
Auxetic materials are a novel class of mechanical metamaterials which exhibit an interesting property of negative Poisson ratio by virtue of their architecture rather than composition. It has been well established that a wide range of negative Poisson ratio can be obtained by varying the geometry and architecture of the cellular materials. However, the limited range of stiffness values obtained fr…
▽ More
Auxetic materials are a novel class of mechanical metamaterials which exhibit an interesting property of negative Poisson ratio by virtue of their architecture rather than composition. It has been well established that a wide range of negative Poisson ratio can be obtained by varying the geometry and architecture of the cellular materials. However, the limited range of stiffness values obtained from a given geometry restricts their applications. Research trials have revealed that multi-material cellular designs have the capability to generate range of stiffness values as per the requirement of application. With the advancements in 3D printing, multi-material cellular designs can be realized in practice. In this work, multi-material cellular designs are investigated using finite element method. It was observed that introduction of material gradient/distribution in the cell provides a means to tune cellular stiffness as per the specific requirement. These results will aid in the design of wearable auxetic impact protection devices which rely on stiffness gradients and variable auxeticity.
△ Less
Submitted 31 July, 2017; v1 submitted 14 July, 2017;
originally announced July 2017.
-
Dashbell: A Low-cost Smart Doorbell System for Home Use
Authors:
Bradley Quadros,
Ronit Kadam,
Kartik Saxena,
Wen Shen,
Alfred Kobsa
Abstract:
Smart doorbells allow home owners to receive alerts when a visitor is at the door, see who the guest is, and communicate with the visitor from a smart device. They greatly improve people's life quality and contribute to the evolution of smart homes. However, the commercial smart doorbells are quite expensive, usually cost more than 190 US dollars, which is a substantial impediment on the pervasive…
▽ More
Smart doorbells allow home owners to receive alerts when a visitor is at the door, see who the guest is, and communicate with the visitor from a smart device. They greatly improve people's life quality and contribute to the evolution of smart homes. However, the commercial smart doorbells are quite expensive, usually cost more than 190 US dollars, which is a substantial impediment on the pervasiveness of smart doorbells. To solve this problem, we introduce the Dashbell-a budget smart doorbell system for home use. It connects a WiFi-enabled device, the Amazon Dash Button, to a network and enables the home owner to answer the bell triggered by the dash button using a smartphone. The Dashbell system also enables fast fault detection and diagnosis due to its distributed framework.
△ Less
Submitted 16 June, 2017;
originally announced June 2017.
-
Three-fold Constructive Perturbation for Significant Enhancement in Field Emission from Nickel Oxide Nano-Thorn
Authors:
Suryakant Mishra,
Priyanka Yogi,
Shailendra K. Saxena,
J. Jayabalan,
P. R. Sagdeo,
Rajesh Kumar
Abstract:
A power efficient and stable field emission (FE) has been reported here from Nickel Oxide nanostructures. Modification in device geometry and surface micro- (nano-) structure has been found helpful in addressing the bottlenecks in achieving an efficient FE . In terms of threshold and turn on fields, three orders of magnitude better electron FE has been observed in the nickel oxide nanopetals (NiO-…
▽ More
A power efficient and stable field emission (FE) has been reported here from Nickel Oxide nanostructures. Modification in device geometry and surface micro- (nano-) structure has been found helpful in addressing the bottlenecks in achieving an efficient FE . In terms of threshold and turn on fields, three orders of magnitude better electron FE has been observed in the nickel oxide nanopetals (NiO-NPs) fabricated using simple hydrothermal technique. Uniform and vertically aligned NiO-NPs structures, grown on very flat conducting surface (FTO coated glass), show sharp needles like structures on the top edges of the flakes. These ultrafine structures play the main role in field emission to start at such a low turn on fields. The FE data (J-E plot) has been fitted with Fowler-Nordheim (FN) equation to estimate threshold field value and field enhancement factor which are found to be 3 V/mm and $\sim$ 5 $\times$ 10$^6$ respectively.
△ Less
Submitted 6 May, 2017;
originally announced May 2017.
-
Tent--Shaped Surface Morphologies of Silicon: Texturization by Metal Induced Etching
Authors:
Priyanka Yogi,
Deepika Poonia,
Suryakant Mishra,
Shailendra K. Saxena,
Swarup Roy,
Pankaj R Sagdeo,
Rajesh Kumar
Abstract:
Nano--metal/semiconductor junction dependent porosification of silicon (Si) has been studied here. The silicon (Si) nanostructures (NS) have been textured on n-- and p-- type silicon wafers using Ag and Au metal nano particles induced chemical etching. The combinations of n--Si/Ag and p--Si/Au form ohmic contact and result in the same texturization on the Si surface on porosification where tent--s…
▽ More
Nano--metal/semiconductor junction dependent porosification of silicon (Si) has been studied here. The silicon (Si) nanostructures (NS) have been textured on n-- and p-- type silicon wafers using Ag and Au metal nano particles induced chemical etching. The combinations of n--Si/Ag and p--Si/Au form ohmic contact and result in the same texturization on the Si surface on porosification where tent--shaped morphology has been observed consistently with n-- and p--type Si. Whereas, porosification result in different surface texturization for other two combinations (p--Si/Ag and n--Si/Au) where Schottkey contacts are formed. Quantitative analysis have been done using ImageJ to process the SEM images of SiNS, which confirms that the tent like SiNS are formed when etching of silicon wafer is done by AgNPs and AuNPs on n and p type Si wafer respectively. These easily prepared sharp tent--shaped Si NSs can be used for enhanced field emission applications.
△ Less
Submitted 7 May, 2017;
originally announced May 2017.
-
Observation, Evidence and Origin of Room Temperature Magnetodielectric Effect in Mn doped LaGaO3
Authors:
Hari Mohan Rai,
Shailendra K. Saxena,
Vikash Mishra,
Rajesh Kumar,
Pankaj R. Sagdeo
Abstract:
We report an observation of room temperature magnetodielectric (RTMD) effect in Mn doped LaGaO3. Results of frequency dependent magnetoresistance (FDMR) measurements discards the possibility of any magnetoresistive contribution in the observed MD effect. The intrinsic nature of MD coupling has been validated/evidenced by means of magnetic field dependent Raman spectroscopy and explained in terms o…
▽ More
We report an observation of room temperature magnetodielectric (RTMD) effect in Mn doped LaGaO3. Results of frequency dependent magnetoresistance (FDMR) measurements discards the possibility of any magnetoresistive contribution in the observed MD effect. The intrinsic nature of MD coupling has been validated/evidenced by means of magnetic field dependent Raman spectroscopy and explained in terms of modified volume strain governed by magnetic field induced rerotation of spin coupled Mn-orbitals. Ultimately, present RTMD effect is attributed to magneto-compression/magnetostriction associated with spin-phonon coupling as evidenced in the form of magnetic field induced hardening of symmetric stretching (SS) MnO6 octahedral Raman modes. Presently studied Mn doped LaGaO3 can be a candidate for magnetodielectric applications.
△ Less
Submitted 29 April, 2017;
originally announced May 2017.
-
Metastable behavior of Urbach tail states in BaTiO3 across phase transition
Authors:
Vikash Mishra,
Archna Sagdeo,
Kamal Warshi,
Hari Mohan Rai,
Shailendra K. Saxena,
Rajesh Kumar,
P. R. Sagdeo
Abstract:
The temperature dependent diffuse reflectance spectroscopy measurements were carried out on the polycrystalline samples of BaTiO3 across the tetragonal to cubic structural phase transition temperature. The values of various optical parameters such as band gap (Eg), Urbach energy (EU) and Urbach focus (E0) are estimated in the range of 300 K to 470K. It is observed that near structural phase transi…
▽ More
The temperature dependent diffuse reflectance spectroscopy measurements were carried out on the polycrystalline samples of BaTiO3 across the tetragonal to cubic structural phase transition temperature. The values of various optical parameters such as band gap (Eg), Urbach energy (EU) and Urbach focus (E0) are estimated in the range of 300 K to 470K. It is observed that near structural phase transition temperatures there exists two value of E0, suggesting presence of electronic heterogeneity over wide temperature range. Further near transition temperature EU shows metastability i.e. value of EU at temperature T is not constant but is a function of time (t). Interestingly it is observed that the ratio of EU(t=0)/ EU(t = tm), is almost remains constant at 295 K (pure tetragonal phase) and at 450 K (pure cubic phase), whereas this ratio shows decreasing behavior close to structural phase transition temperature, which confirms the presence of electronic metastibility in the pure BaTiO3. The observed metastibility can be fitted with the stretch exponents relaxation behavior, suggesting the presence of dynamic heterogeneous electronic disorder present in the sample across the transition. Further it appears that these metastable Urbach tail states (electronic disorder) may couple with the soft phonon modes and responsible for the observed terahertz dielectric relaxation (Phys. Rev. Lett. 101, 167402 (2008)). Further; present studies suggest that the optical studies appear to be more sensitive to probe the disorder/heterogeneity present in the sample.
△ Less
Submitted 20 December, 2016;
originally announced December 2016.
-
Analysis of One-Bit Quantized Precoding for the Multiuser Massive MIMO Downlink
Authors:
Amodh Kant Saxena,
Inbar Fijalkow,
A. Lee Swindlehurst
Abstract:
We present a mathematical analysis of linear precoders for downlink massive MIMO multiuser systems that employ one-bit digital-to-analog converters at the basestation in order to reduce complexity and mitigate power usage. The analysis is based on the Bussgang theorem, and applies generally to any linear precoding scheme. We examine in detail the special case of the quantized zero-forcing (ZF) pre…
▽ More
We present a mathematical analysis of linear precoders for downlink massive MIMO multiuser systems that employ one-bit digital-to-analog converters at the basestation in order to reduce complexity and mitigate power usage. The analysis is based on the Bussgang theorem, and applies generally to any linear precoding scheme. We examine in detail the special case of the quantized zero-forcing (ZF) precoder, and derive a simple asymptotic expression for the resulting symbol error rate at each terminal. Our analysis illustrates that the performance of the quantized ZF precoder depends primarily on the ratio of the number of antennas to the number of users, and our simulations show that it can outperform the much more complicated maximum likelihood encoder for low-to-moderate signal to noise ratios, where massive MIMO systems are presumed to operate. We also use the Bussgang theorem to derive a new linear precoder optimized for the case of one-bit quantization, and illustrate its improved performance.
△ Less
Submitted 20 October, 2016;
originally announced October 2016.
-
In-situ spectroscopic studies of viologen based electrochromic device
Authors:
Suryakant Mishra,
Haardik Pandey,
Priyanka Yogi,
Shailendra K. Saxena,
Swaroop Roy,
Pankaj R. Sagdeo,
Rajesh Kumar
Abstract:
Fabrication and operation of simple solid state electrochromic devices using ethyl viologen diperchlorate in a polymer matrix is presented here. In-situ Raman and transmission/absorption studies have been done to establish the origin of bias induced color change, between a transparent and navy blue color, in the electrochromic device. The origin of bias induced color change has been attributed to…
▽ More
Fabrication and operation of simple solid state electrochromic devices using ethyl viologen diperchlorate in a polymer matrix is presented here. In-situ Raman and transmission/absorption studies have been done to establish the origin of bias induced color change, between a transparent and navy blue color, in the electrochromic device. The origin of bias induced color change has been attributed to the bias induced redox switching between its viologen dication and free redicle forms. Fundamental reason behind colour changes of viologen molecule has been established. In-situ UV-Vis spectra reveals that the navy blue color of the device under biased condition is not due to increase in the transparency corresponding to blue wavelength but due to suppression of the transparency corresponding to the complementary colors. Absorption modulation has been reported from the device with good ON/OFF contrast of the device.
△ Less
Submitted 15 July, 2016;
originally announced July 2016.
-
Role of Metal Nanoparticles on porosification of silicon by metal induced etching (MIE)
Authors:
Shailendra K. Saxena,
Priyanka Yogi,
Pooja Yadav,
Suryakant Mishra,
Haardik Pandey,
Hari Mohan Rai,
Vivek Kumar,
Pankaj R. Sagdeo,
Rajesh Kumar
Abstract:
Porosification of silicon (Si) by metal induced etching (MIE) process have been studies here to understand the etching mechanism. The etching mechanism has been discussed on the basis of electron transfer from Si to metal ion (Ag$^+$) and metal to H$_2$O$_2$. Role of silver nanoparticles (AgNPs) in the etching process has been investigated by studying the effect of AgNPs coverage on surface porosi…
▽ More
Porosification of silicon (Si) by metal induced etching (MIE) process have been studies here to understand the etching mechanism. The etching mechanism has been discussed on the basis of electron transfer from Si to metal ion (Ag$^+$) and metal to H$_2$O$_2$. Role of silver nanoparticles (AgNPs) in the etching process has been investigated by studying the effect of AgNPs coverage on surface porosity. A quantitative analysis of SEM images, done using Image J, shows a direct correlation between AgNPs coverage and surface porosity after the porosification. Density of Si nanowires (NWs) also varies as a function of AgNPs fractional coverage which reasserts the fact that AgNPs governs the porosification process during MIE.
△ Less
Submitted 21 January, 2016;
originally announced January 2016.
-
Half-metallicity in Armchair Boron Nitride Nanoribbons: A First-Principles Study
Authors:
Hari Mohan Rai,
Shailendra K. Saxena,
Vikash Mishra,
Ravikiran Late,
Rajesh Kumar,
Pankaj R. Sagdeo,
Neeraj K. Jaiswal,
Pankaj Srivastava
Abstract:
Using density functional theory, we predict half-metallicity in edge hydrogenated armchair boron nitride nanoribbons (ABNNRs). The predicted spin polarization is analyzed in detail by calculating electronic and magnetic properties of these hydrogenated ABNNRs by means of first-principles calculations within the local spin-density approximation (LSDA). ABNNRs with only edge B atoms passivated by H…
▽ More
Using density functional theory, we predict half-metallicity in edge hydrogenated armchair boron nitride nanoribbons (ABNNRs). The predicted spin polarization is analyzed in detail by calculating electronic and magnetic properties of these hydrogenated ABNNRs by means of first-principles calculations within the local spin-density approximation (LSDA). ABNNRs with only edge B atoms passivated by H atoms are found to be half-metallic (regardless of their width) with a half-metal gap of 0.26 eV. Upto 100% spin polarized charge transport is predicted across the Fermi level owing to the giant spin splitting. Transmission spectrum analysis also confirms the separation of spin up and spindown electronic channels. It is revealed that H-passivation of only edge N atoms transforms non-magnetic bare ribbons into energetically stable magnetic semiconductors whereas hydrogenation of both the edges does not affect the electronic and magnetic state of bare ribbons significantly. The results are promising towards the realization of inorganic spintronic devices.
△ Less
Submitted 11 January, 2016;
originally announced January 2016.
-
Interplay between Phonon Confinement and Fano Effect on Raman line shape for semiconductor nanostructures: Analytical study
Authors:
Priyanka Yogi,
Shailendra K. Saxena,
Suryakant Mishra,
Vikash Mishra,
Hari M. Rai,
Ravikiran Late,
Vivek Kumar,
Bipin Joshi,
Pankaj R. Sagdeo,
Rajesh Kumar
Abstract:
Theoretical Raman line shape functions have been studied to take care of quantum confinement effect and Fano effect individually and jointly. The characteristics of various Raman line shapes have been studied in terms of the broadening and asymmetry of Raman line shapes. It is shown that the asymmetry in the Raman line-shape function caused by these two effects individually does not add linearly t…
▽ More
Theoretical Raman line shape functions have been studied to take care of quantum confinement effect and Fano effect individually and jointly. The characteristics of various Raman line shapes have been studied in terms of the broadening and asymmetry of Raman line shapes. It is shown that the asymmetry in the Raman line-shape function caused by these two effects individually does not add linearly to give asymmetry of line-shape generated by considering the combined effect. This indicates existence of interplay between the two effects. The origin of interplay lies in the fact that Fano effect itself depends on quantum confinement effect and in turn provides an asymmetry. This can not be explained by considering the two effects contribution independent of each other.
△ Less
Submitted 3 August, 2015;
originally announced August 2015.
-
Fractional telegraph equation, Mittag-Leffler function, Hilfer derivative, Hadamard fractional derivative, Riesz-Feller space-fractional derivative
Authors:
Ram K. Saxena,
R. Garra,
E. Orsingher
Abstract:
In this paper we consider space-time fractional telegraph equations, where the time derivatives are intended in the sense of Hilfer and Hadamard while the space fractional derivatives are meant in the sense of Riesz-Feller. We provide the Fourier transforms of the solutions of some Cauchy problems for these fractional equations. Probabilistic interpretations of some specific cases are also provide…
▽ More
In this paper we consider space-time fractional telegraph equations, where the time derivatives are intended in the sense of Hilfer and Hadamard while the space fractional derivatives are meant in the sense of Riesz-Feller. We provide the Fourier transforms of the solutions of some Cauchy problems for these fractional equations. Probabilistic interpretations of some specific cases are also provided.
△ Less
Submitted 19 June, 2015;
originally announced June 2015.
-
Computable Solutions of Fractional Reaction-Diffusion Equations Associated with Generalized Riemann-Liouville Fractional Derivatives of Fractional Order
Authors:
R. K. Saxena,
A. M. Mathai,
H. J. Haubold
Abstract:
This paper is in continuation of the authors' recently published paper (Journal of Mathematical Physics 55(2014)083519) in which computational solutions of an unified reaction-diffusion equation of distributed order associated with Caputo derivatives as the time-derivative and Riesz-Feller derivative as space derivative is derived. In the present paper, computable solutions of distributed order fr…
▽ More
This paper is in continuation of the authors' recently published paper (Journal of Mathematical Physics 55(2014)083519) in which computational solutions of an unified reaction-diffusion equation of distributed order associated with Caputo derivatives as the time-derivative and Riesz-Feller derivative as space derivative is derived. In the present paper, computable solutions of distributed order fractional reaction-diffusion equations associated with generalized Riemann-Liouville derivatives of fractional orders as the time-derivative and Riesz-Feller fractional derivative as the space derivative are investigated. The solutions of the fractional reaction-diffusion equations of fractional orders are obtained in this paper. The method followed in deriving the solutions is that of joint Laplace and Fourier transforms. The solutions obtained are in a closed and computable form in terms of the familiar generalized Mittag-Leffler functions. They provide elegant extensions of the results given in the literature.
△ Less
Submitted 21 February, 2015;
originally announced February 2015.
-
Intrinsic Half-metallicity in Edge Fluorinated Armchair Boron Nitride Nanoribbons
Authors:
Hari Mohan Rai,
Shailendra K Saxena,
Vikash Mishra,
Ravikiran Late,
Rajesh Kumar,
Pankaj R Sagdeo,
Neeraj K. Jaiswal,
Pankaj Srivastava
Abstract:
We predict intrinsic half-metallicity in armchair boron nitride nanoribbons (ABNNRs) via edge fluorination. The stability, electronic and magnetic properties of bare and edge fluorinated ABNNRs have been systematically analyzed by means of first-principles calculations within the local spin-density approximation (LSDA). The ribbons whose only edge-B atoms passivated with F atoms (i.e., edge-N atom…
▽ More
We predict intrinsic half-metallicity in armchair boron nitride nanoribbons (ABNNRs) via edge fluorination. The stability, electronic and magnetic properties of bare and edge fluorinated ABNNRs have been systematically analyzed by means of first-principles calculations within the local spin-density approximation (LSDA). The ribbons whose only edge-B atoms passivated with F atoms (i.e., edge-N atoms are un-passivated), regardless of width, are found half-metallic with a half-metal gap of 0.3 eV. A 100 \% spin polarized charge transport across the Fermi level is expected for such ribbons as the spin polarized states are $\sim$0.4 eV more stable than the spin un-polarized states and only single-spin conducting channels are present across the Fermi level owing to the gigantic spin splitting. The existence of half-metallicity is attributed to the localization of electronic charge at bare edge-N atoms as revealed from the analysis of Bloch states and projected density of states (PDOS).The sufficiently large half-metal gap (0.3 eV) with huge difference in the energies ($\sim$ 0.4 eV) of spin polarized and spin compensated states projects these half-metallic ABNNRs as potential candidate for spintronics applications.
△ Less
Submitted 10 February, 2016; v1 submitted 7 January, 2015;
originally announced January 2015.
-
Space-time fractional reaction-diffusion equations associated with a generalized Riemann-Liouville fractional derivative
Authors:
R. K. Saxena,
A. M. Mathai,
H. J. Haubold
Abstract:
This paper deals with the investigation of the computational solutions of an unified fractional reaction-diffusion equation, which is obtained from the standard diffusion equation by replacing the time derivative of first order by the generalized Riemann-Liouville fractional derivative defined in Hilfer et al. , and the space derivative of second order by the Riesz-Feller fractional derivative, an…
▽ More
This paper deals with the investigation of the computational solutions of an unified fractional reaction-diffusion equation, which is obtained from the standard diffusion equation by replacing the time derivative of first order by the generalized Riemann-Liouville fractional derivative defined in Hilfer et al. , and the space derivative of second order by the Riesz-Feller fractional derivative, and adding a function $φ(x,t)$. The solution is derived by the application of the Laplace and Fourier transforms in a compact and closed form in terms of Mittag-Leffler functions. The main result obtained in this paper provides an elegant extension of the fundamental solution for the space-time fractional diffusion equation obtained earlier by Mainardi et al., and the result very recently given by Tomovski et al.. At the end, extensions of the derived results, associated with a finite number of Riesz-Feller space fractional derivatives, are also investigated.
△ Less
Submitted 5 September, 2014;
originally announced September 2014.
-
Effect of silicon resistivity on its porosification using metal induced chemical etching
Authors:
Shailendra K Saxena,
Gayatri Sahu,
P. K. Sahoo,
Pankaj R. Sagdeo,
Rajesh Kumar
Abstract:
A comparison of porous structures formed from silicon (Si) wafers with different resistivities has been reported here based on the morphological studies carried out using scanning electron microscope (SEM). The porous Si samples have been prepared using metal induced etching (MIE) technique from two different Si wafers having two different resistivities. It is observed that porous Si containing we…
▽ More
A comparison of porous structures formed from silicon (Si) wafers with different resistivities has been reported here based on the morphological studies carried out using scanning electron microscope (SEM). The porous Si samples have been prepared using metal induced etching (MIE) technique from two different Si wafers having two different resistivities. It is observed that porous Si containing well aligned Si nanowires are formed from high resistivity (1-20 $Ω$cm) Si wafer whereas interconnected pores or cheese like structures are formed from low resistivity (0.02 $Ω$cm ) Si wafers after MIE. An explanation for the different porosification processes has also been proposed based on the initial do** level where number of dopants seems to be playing an important role on the etching process. Visible photoluminescence have been observed from all the porous samples possibly due to quantum confinement effect.
△ Less
Submitted 19 August, 2014;
originally announced August 2014.
-
Fractional Helmholtz and fractional wave equations with Riesz-Feller and generalized Riemann-Liouville fractional derivatives
Authors:
Ram K. Saxena,
Zivorad Tomovski,
Trifce Sandev
Abstract:
The objective of this paper is to derive analytical solutions of fractional order Laplace, Poisson and Helmholtz equations in two variables derived from the corresponding standard equations in two dimensions by replacing the integer order partial derivatives with fractional Riesz-Feller derivative and generalized Riemann-Liouville fractional derivative recently defined by Hilfer. The Fourier-Lapla…
▽ More
The objective of this paper is to derive analytical solutions of fractional order Laplace, Poisson and Helmholtz equations in two variables derived from the corresponding standard equations in two dimensions by replacing the integer order partial derivatives with fractional Riesz-Feller derivative and generalized Riemann-Liouville fractional derivative recently defined by Hilfer. The Fourier-Laplace transform method is employed to obtain the solutions in terms of Mittag-Leffler functions, Fox $H$-function and an integral operator containing a Mittag-Leffler function in the kernel. Results for fractional wave equation are presented as well. Some interesting special cases of these equations are considered. Asymptotic behavior and series representation of solutions are analyzed in detail. Many previously obtained results can be derived as special cases of those presented in this paper.
△ Less
Submitted 14 June, 2014;
originally announced June 2014.
-
Micro-Raman and field emission studies of silicon nanowires prepared by metal assisted chemical etching
Authors:
Vivek Kumar,
Shailendra K. Saxena,
Vishakha Kaushik,
Kapil Saxena,
Rajesh Kumar,
A. K. Shukla
Abstract:
Micro-Raman scattering and electron field emission characteristics of silicon nanowires (SiNWs) synthesized by metal assisted chemical etching (MACE) are investigated. Scanning electron microscopy images reveal the growth of well aligned vertical SiNWs. Raman shift and size relation from bond-polarizability model has been used to calculate exact confinement sizes in SiNWs. The Si optical phonon pe…
▽ More
Micro-Raman scattering and electron field emission characteristics of silicon nanowires (SiNWs) synthesized by metal assisted chemical etching (MACE) are investigated. Scanning electron microscopy images reveal the growth of well aligned vertical SiNWs. Raman shift and size relation from bond-polarizability model has been used to calculate exact confinement sizes in SiNWs. The Si optical phonon peak for SiNWs showed a downshift and an asymmetric broadening with decreasing diameter of the SiNWs due to quantum confinement of optical phonons. The field emission characteristics of these SiNWs are studied based by carrying out current-voltage measurements followed by a theoretical analysis using Fowler-Nordheim equation. The electron field emission increased with decreasing diameter of SiNWs. Field emission from these SiNWs exhibits significant enhancement in turn-on field and total emission current with decreasing nanowire size. The reported results in the current study indicate that MACE is a simple technique to prepare well-aligned SiNWs with potentials for applications in field emission devices.
△ Less
Submitted 28 May, 2014;
originally announced May 2014.
-
Comparison of porous silicon prepared using metal-induced etching (MIE) and laser-induced etching (LIE)
Authors:
Shailendra K. Saxena,
Vivek Kumar,
Hari M. Rai,
Gayatri Sahu,
Ravi K. Late,
Kapil Saxena,
A. K. Shukla,
Pankaj R. Sagdeo,
Rajesh Kumar
Abstract:
Porous silicon (p-Si), prepared by two routes (metal induced etching (MIE) and laser induced etching (LIE)) have been studied by comparing the observed surface morphologies using SEM. A uniformly distributed smaller (submicron sized) pores are formed when MIE technique is used because the pore formation is driven by uniformly distributed metal (silver in present case) nanoparticles, deposited prio…
▽ More
Porous silicon (p-Si), prepared by two routes (metal induced etching (MIE) and laser induced etching (LIE)) have been studied by comparing the observed surface morphologies using SEM. A uniformly distributed smaller (submicron sized) pores are formed when MIE technique is used because the pore formation is driven by uniformly distributed metal (silver in present case) nanoparticles, deposited prior to the porosification step. Whereas in p-Si, prepared by LIE technique, wider pores with some variation in pore size as compared to MIE technique is observed because a laser having gaussian profile of intensity is used for porosification. Uniformly distribute well-aligned Si nanowires are observed in samples prepared by MIE method as seen using cross-sectional SEM imaging. A single photoluminescence (PL) peak at 1.96 eV corresponding to red emission at room temperature is observed which reveals that the Si nanowires, present in p-Si prepared by MIE, show quantum confinement effect. The single PL peak confirms the presence of uniform sized nanowires in MIE samples. These vertically aligned Si nanowires can be used for field emission application.
△ Less
Submitted 25 March, 2014;
originally announced March 2014.
-
Evolution of Asymmetric Raman line-shape from nano-structures
Authors:
Rajesh Kumar,
Gayatri Sahu,
Shailendra K. Saxena,
Hari M. Rai,
Pankaj R. Sagdeo
Abstract:
A step-by-step evolution of an asymmetric Raman line-shape function from a Lorentzian line-shape is presented here for low dimensional semiconductors. The evolution reported here is based on the phonon confinement model which is successfully used in literature to explain the asymmetric Raman line-shape from semiconductor nano-structures. Physical significance of different terms in the theoretical…
▽ More
A step-by-step evolution of an asymmetric Raman line-shape function from a Lorentzian line-shape is presented here for low dimensional semiconductors. The evolution reported here is based on the phonon confinement model which is successfully used in literature to explain the asymmetric Raman line-shape from semiconductor nano-structures. Physical significance of different terms in the theoretical asymmetric Raman line-shape has been explained here. Better understanding of theoretical reasoning behind each term allows one to use the theoretical Raman line-shape without going into details of theory from first principle. This will enable one to empirically derive a theoretical Raman line-shape function for any material if information about its phonon dispersion, size dependence etc is known.
△ Less
Submitted 20 September, 2013;
originally announced September 2013.
-
Computational solutions of distributed oder reaction-diffusion systems associated with Riemann-Liouville derivatives
Authors:
R. K. Saxena,
A. M. Mathai,
H. J. Haubold
Abstract:
This article is in continuation of our earlier article [37] in which computational solution of an unified reaction-diffusion equation of distributed order associated with Caputo derivatives as the time-derivative and Riesz-Feller derivative as space derivative is derived. In this article, we present computational solutions of distributed order fractional reaction-diffusion equations associated wit…
▽ More
This article is in continuation of our earlier article [37] in which computational solution of an unified reaction-diffusion equation of distributed order associated with Caputo derivatives as the time-derivative and Riesz-Feller derivative as space derivative is derived. In this article, we present computational solutions of distributed order fractional reaction-diffusion equations associated with Riemann-Liouville derivatives of fractional orders as the time-derivatives and Riesz-Feller fractional derivatives as the space derivatives. The method followed in deriving the solution is that of joint Laplace and Fourier transforms. The solution is derived in a closed and computational form in terms of the familiar Mittag-Leffler function. It provides an elegant extension of the results given earlier by Chen et al. [1], Debnath [3], Saxena et al. [36], Haubold et al. [15] and Pagnini and Mainardi [30]. The results obtained are presented in the form of two theorems. Some interesting results associated with fractional Riesz derivatives are also derived as special cases of our findings. It will be seen that in case of distributed order fractional reaction-diffusion, the solution comes in a compact and closed form in terms of a generalization of the Kampé de Fériet hypergeometric series in two variables, defined by Srivastava and Daoust [46] (also see Appendix B). The convergence of the double series occurring in the solution is also given.
△ Less
Submitted 2 October, 2012;
originally announced November 2012.
-
Computational solutions of unified fractional reaction-diffusion equations with composite fractional time derivative
Authors:
R. K. Saxena,
A. M. Mathai,
H. J. Haubold
Abstract:
This paper deals with the investigation of the computational solutions of an unified fractional reaction-diffusion equation, which is obtained from the standard diffusion equation by replacing the time derivative of first order by the generalized fractional time-derivative defined by Hilfer (2000), the space derivative of second order by the Riesz-Feller fractional derivative and adding the functi…
▽ More
This paper deals with the investigation of the computational solutions of an unified fractional reaction-diffusion equation, which is obtained from the standard diffusion equation by replacing the time derivative of first order by the generalized fractional time-derivative defined by Hilfer (2000), the space derivative of second order by the Riesz-Feller fractional derivative and adding the function phi(x,t) which is a nonlinear function overning reaction. The solution is derived by the application of the Laplace and Fourier transforms in a compact and closed form in terms of the H-function. The main result obtained in this paper provides an elegant extension of the fundamental solution for the space-time fractional diffusion equation obtained earlier by Mainardi et al. (2001, 2005) and a result very recently given by Tomovski et al. (2011). Computational representation of the fundamental solution is also obtained explicitly. Fractional order moments of the distribution are deduced. At the end, mild extensions of the derived results associated with a finite number of Riesz-Feller space fractional derivatives are also discussed.
△ Less
Submitted 3 October, 2012;
originally announced October 2012.
-
Analysis of Solar Neutrino Data from SuperKamiokande I and II: Back to the Solar Neutrino Problem
Authors:
H. J. Haubold,
A. M. Mathai,
R. K. Saxena
Abstract:
We are going back to the roots of the original solar neutrino problem: analysis of data from solar neutrino experiments. The application of standard deviation analysis (SDA) and diffusion entropy analysis (DEA) to the SuperKamiokande I and II data reveals that they represent a non-Gaussian signal. The Hurst exponent is different from the scaling exponent of the probability density function and bot…
▽ More
We are going back to the roots of the original solar neutrino problem: analysis of data from solar neutrino experiments. The application of standard deviation analysis (SDA) and diffusion entropy analysis (DEA) to the SuperKamiokande I and II data reveals that they represent a non-Gaussian signal. The Hurst exponent is different from the scaling exponent of the probability density function and both Hurst exponent and scaling exponent of the probability density function of the SuperKamiokande data deviate considerably from the value of 0.5 which indicates that the statistics of the underlying phenomenon is anomalous. To develop a road to the possible interpretation of this finding we utilize Mathai's pathway model and consider fractional reaction and fractional diffusion as possible explanations of the non-Gaussian content of the SuperKamiokande data.
△ Less
Submitted 7 September, 2012;
originally announced September 2012.
-
Free Final-Time Optimal Control for HIV Viral Dynamics
Authors:
Gaurav Pachpute,
Kriti Saxena
Abstract:
In this paper, we examine a well-established model for HIV wild-type infection. The algorithm for steepest descent method for fixed final-time is stated and a modified method for free final-time is presented. The first type of cost functional considered, seeks to minimize the total time of therapy. An easy implementation for this problem suggests that it can be effective in the early stages of tre…
▽ More
In this paper, we examine a well-established model for HIV wild-type infection. The algorithm for steepest descent method for fixed final-time is stated and a modified method for free final-time is presented. The first type of cost functional considered, seeks to minimize the total time of therapy. An easy implementation for this problem suggests that it can be effective in the early stages of treatment as well as for individual-based studies, due to the "hit first and hit hard" nature of optimal control.
An LQR based cost functional is also presented and the solution is found using steepest descent method. It suggests that the optimal therapy must remain high until the patient shows signs of recovery after which, the therapy gradually decreases. This is in line with the biomedical philosophy. Solution to a modified problem which includes a weight for total time is approximated using the modified algorithm. It shows a considerable drop in the total period. We conclude that, a decreased and optimized therapy period can help us increase efficiency as well as the turnover rate for patient care.
△ Less
Submitted 15 October, 2011;
originally announced October 2011.
-
Computable solutions of fractional partial differential equations related to reaction-diffusion systems
Authors:
R. K. Saxena,
A. M. Mathai,
H. J. Haubold
Abstract:
The object of this paper is to present a computable solution of a fractional partial differential equation associated with a Riemann-Liouville derivative of fractional order as the time-derivative and Riesz-Feller fractional derivative as the space derivative. The method followed in deriving the solution is that of joint Laplace and Fourier transforms. The solution is derived in a closed and compu…
▽ More
The object of this paper is to present a computable solution of a fractional partial differential equation associated with a Riemann-Liouville derivative of fractional order as the time-derivative and Riesz-Feller fractional derivative as the space derivative. The method followed in deriving the solution is that of joint Laplace and Fourier transforms. The solution is derived in a closed and computable form in terms of the H-function. It provides an elegant extension of the results given earlier by Debnath, Chen et al., Haubold et al., Mainardi et al., Saxena et al., and Pagnini et al. The results obtained are presented in the form of four theorems. Some results associated with fractional Schroeodinger equation and fractional diffusion-wave equation are also derived as special cases of the findings.
△ Less
Submitted 28 September, 2011;
originally announced September 2011.
-
Distributed order reaction-diffusion systems associated with Caputo derivatives
Authors:
R. K. Saxena,
A. M. Mathai,
H. J. Haubold
Abstract:
This paper deals with the investigation of the solution of an unified fractional reaction-diffusion equation of distributed order associated with the Caputo derivatives as the time-derivative and Riesz-Feller fractional derivative as the space-derivative. The solution is derived by the application of the joint Laplace and Fourier transforms in compact and closed form in terms of the H-function. Th…
▽ More
This paper deals with the investigation of the solution of an unified fractional reaction-diffusion equation of distributed order associated with the Caputo derivatives as the time-derivative and Riesz-Feller fractional derivative as the space-derivative. The solution is derived by the application of the joint Laplace and Fourier transforms in compact and closed form in terms of the H-function. The results derived are of general nature and include the results investigated earlier by other authors, notably by Mainardi et al. [23,24], for the fundamental solution of the space-time fractional equation, including Haubold et al. [13] and Saxena et al. [38] for fractional reaction-diffusion equations. The advantage of using the Riesz-Feller derivative lies in the fact that the solution of the fractional reaction-diffusion equation, containing this derivative, includes the fundamental solution for space-time fractional diffusion, which itself is a generalization of fractional diffusion, space-time fraction diffusion, and time-fractional diffusion. These specialized types of diffusion can be interpreted as spatial probability density functions evolving in time and are expressible in terms of the H-function in compact forms. The convergence conditions for the double series occurring in the solutions are investigated. It is interesting to observe that the double series comes out to be a special case of the Srivastava-Daoust hypergeometric function of two variables given in the Appendix B of this paper.
△ Less
Submitted 22 September, 2011;
originally announced September 2011.
-
Further solutions of fractional reaction-diffusion equations in terms of the H-function
Authors:
H. J. Haubold,
A. M. Mathai,
R. K. Saxena
Abstract:
This paper is a continuation of our earlier paper in which we have derived the solution of an unified fractional reaction-diffusion equation associated with the Caputo derivative as the time-derivative and the Riesz-Feller fractional derivative as the space-derivative. In this paper, we consider an unified reaction-diffusion equation with Riemann-Liouville fractional derivative as the time-derivat…
▽ More
This paper is a continuation of our earlier paper in which we have derived the solution of an unified fractional reaction-diffusion equation associated with the Caputo derivative as the time-derivative and the Riesz-Feller fractional derivative as the space-derivative. In this paper, we consider an unified reaction-diffusion equation with Riemann-Liouville fractional derivative as the time-derivative and Riesz-Feller derivative as the space-derivative. The solution is derived by the application of the Laplace and Fourier transforms in a compact and closed form in terms of the H-function. The results derived are of general character and include the results investigated earlier by Kilbas et al. (2006a), Saxena et al. (2006c), and Mathai et al. (2010). The main result is given in the form of a theorem. A number of interesting special cases of the theorem are also given as corollaries.
△ Less
Submitted 27 February, 2011;
originally announced February 2011.
-
Significant Interval and Frequent Pattern Discovery in Web Log Data
Authors:
Kanak Saxena,
Rahul Shukla
Abstract:
There is a considerable body of work on sequence mining of Web Log Data. We are using One Pass frequent Episode discovery (or FED) algorithm, takes a different approach than the traditional apriori class of pattern detection algorithms. In this approach significant intervals for each Website are computed first (independently) and these interval used for detecting frequent patterns/Episode and th…
▽ More
There is a considerable body of work on sequence mining of Web Log Data. We are using One Pass frequent Episode discovery (or FED) algorithm, takes a different approach than the traditional apriori class of pattern detection algorithms. In this approach significant intervals for each Website are computed first (independently) and these interval used for detecting frequent patterns/Episode and then the Analysis is performed on Significant Intervals and frequent patterns That can be used to forecast the user's behavior using previous trends and this can be also used for advertising purpose. This type of applications predicts the Website interest. In this approach, time-series data are folded over a periodicity (day, week, etc.) Which are used to form the Interval? Significant intervals are discovered from these time points that satisfy the criteria of minimum confidence and maximum interval length specified by the user.
△ Less
Submitted 5 February, 2010;
originally announced February 2010.
-
Solutions of the Fractional Reaction Equation and the Fractional Diffusion Equation
Authors:
R. K. Saxena,
A. M. Mathai,
H. J. Haubold
Abstract:
In view of the role of reaction equations in physical problems, the authors derive the explicit solution of a fractional reaction equation of general character, that unifies and extends earlier results. Further, an alternative shorter method based on a result developed by the authors is given to derive the solution of a fractional diffusion equation. Fox functions and Mittag-Leffler functions ar…
▽ More
In view of the role of reaction equations in physical problems, the authors derive the explicit solution of a fractional reaction equation of general character, that unifies and extends earlier results. Further, an alternative shorter method based on a result developed by the authors is given to derive the solution of a fractional diffusion equation. Fox functions and Mittag-Leffler functions are used for closed-form representations of the solutions of the respective differential equations.
△ Less
Submitted 13 January, 2010;
originally announced January 2010.
-
An Alternative Method for Solving a Certain Class of Fractional Kinetic Equations
Authors:
R. K. Saxena,
A. M. Mathai,
H. J. Haubold
Abstract:
An alternative method for solving the fractional kinetic equations solved earlier by Haubold and Mathai (2000) and Saxena et al. (2002, 2004a, 2004b) is recently given by Saxena and Kalla (2007). This method can also be applied in solving more general fractional kinetic equations than the ones solved by the aforesaid authors. In view of the usefulness and importance of the kinetic equation in ce…
▽ More
An alternative method for solving the fractional kinetic equations solved earlier by Haubold and Mathai (2000) and Saxena et al. (2002, 2004a, 2004b) is recently given by Saxena and Kalla (2007). This method can also be applied in solving more general fractional kinetic equations than the ones solved by the aforesaid authors. In view of the usefulness and importance of the kinetic equation in certain physical problems governing reaction-diffusion in complex systems and anomalous diffusion, the authors present an alternative simple method for deriving the solution of the generalized forms of the fractional kinetic equations solved by the aforesaid authors and Nonnenmacher and Metzler (1995). The method depends on the use of the Riemann-Liouville fractional calculus operators. It has been shown by the application of Riemann-Liouville fractional integral operator and its interesting properties, that the solution of the given fractional kinetic equation can be obtained in a straight-forward manner. This method does not make use of the Laplace transform.
△ Less
Submitted 13 January, 2010;
originally announced January 2010.
-
A Way to Understand Various Patterns of Data Mining Techniques for Selected Domains
Authors:
Kanak Saxena,
D. S Rajpoot
Abstract:
This has much in common with traditional work in statistics and machine learning. However, there are important new issues which arise because of the sheer size of the data. One of the important problem in data mining is the Classification-rule learning which involves finding rules that partition given data into predefined classes. In the data mining domain where millions of records and a large n…
▽ More
This has much in common with traditional work in statistics and machine learning. However, there are important new issues which arise because of the sheer size of the data. One of the important problem in data mining is the Classification-rule learning which involves finding rules that partition given data into predefined classes. In the data mining domain where millions of records and a large number of attributes are involved, the execution time of existing algorithms can become prohibitive, particularly in interactive applications.
△ Less
Submitted 4 November, 2009;
originally announced November 2009.
-
Mittag-Leffler Functions and Their Applications
Authors:
H. J. Haubold,
A. M. Mathai,
R. K. Saxena
Abstract:
Motivated essentially by the success of the applications of the Mittag-Leffler functions in many areas of science and engineering, the authors present in a unified manner, a detailed account or rather a brief survey of the Mittag- Leffler function, generalized Mittag-Leffler functions, Mittag-Leffler type functions, and their interesting and useful properties. Applications of Mittag-Leffler func…
▽ More
Motivated essentially by the success of the applications of the Mittag-Leffler functions in many areas of science and engineering, the authors present in a unified manner, a detailed account or rather a brief survey of the Mittag- Leffler function, generalized Mittag-Leffler functions, Mittag-Leffler type functions, and their interesting and useful properties. Applications of Mittag-Leffler functions in certain areas of physical and applied sciences are also demonstrated. During the last two decades this function has come into prominence after about nine decades of its discovery by a Swedish mathematician G.M. Mittag-Leffler, due its vast potential of its applications in solving the problems of physical, biological, engineering and earth sciences etc. In this survey paper, nearly all types of Mittag-Leffler type functions existing in the literature are presented. An attempt is made to present nearly an exhaustive list of references concerning the Mittag-Leffler functions to make the reader familiar with the present trend of research in Mittag-Leffler type functions and their applications.
△ Less
Submitted 4 October, 2009; v1 submitted 1 September, 2009;
originally announced September 2009.