-
Progenitor Constraint Incorporating Shell Merger: The Case of Supernova Remnant G359.0-0.9
Authors:
Kai Matsunaga,
Hiroyuki Uchida,
Rei Enokiya,
Toshiki Sato,
Ryo Sawada,
Hideyuki Umeda,
Takuto Narita,
Takeshi Go Tsuru
Abstract:
It is generally hard to put robust constraints on progenitor masses of supernovae (SNe) and remnants (SNRs) observationally, while they offer tantalizing clues to understanding explosion mechanisms and mass distribution. Our recent study suggests that ``shell merger'', which is theoretically expected for stellar evolution, can appreciably affect final yields of inter-mediate mass elements (IMEs; s…
▽ More
It is generally hard to put robust constraints on progenitor masses of supernovae (SNe) and remnants (SNRs) observationally, while they offer tantalizing clues to understanding explosion mechanisms and mass distribution. Our recent study suggests that ``shell merger'', which is theoretically expected for stellar evolution, can appreciably affect final yields of inter-mediate mass elements (IMEs; such as Ne, Mg, and Si). In light of this, here we report results of X-ray spectral analysis of a Galactic SNR G359.0-0.9, whose abundance pattern may possibly be anomalous according to a previous study. Our spectroscopy using all the available data taken with XMM-Newton reveals that this remnant is classified as Mg-rich SNRs because of its high Mg-to-Ne ratio (Z_Mg/Z_Ne=1.90+0.27-0.19; mass ratio 0.66+0.09-0.07) and conclude that the result cannot be explained without the shell merger. By comparing the observation with theoretical calculations, we prefer the so-called Ne-burning shell intrusion and in this case the progenitor mass M_ZAMS is likely <15M_sun. We confirm the result also by our new molecular line observations with the NRO-45 m telescope: G359.0-0.9 is located in the Scutum-Centaurus arm (2.66--2.94 kpc) and in this case the resultant total ejecta mass ~6.8M_sun is indeed consistent with the above estimate. Our method using mass ratios of IMEs presented in this paper will become useful to distinguish the type of the shell merger, the Ne-burning shell intrusion and the O-burning shell merger, for future SNR studies.
△ Less
Submitted 31 May, 2024;
originally announced May 2024.
-
Qudit generalization of the qubit echo and its application to a qutrit-based Toffoli gate
Authors:
Yutaro Iiyama,
Wonho Jang,
Naoki Kanazawa,
Ryu Sawada,
Tamiya Onodera,
Koji Terashi
Abstract:
The fidelity of certain gates on noisy quantum computers may be improved when they are implemented using more than two levels of the involved transmons. The main impediments to achieving this potential are the dynamic gate phase errors that cannot be corrected via calibration. The standard tool for countering such phase errors in two-level qubits is the echo protocol, often referred to as the dyna…
▽ More
The fidelity of certain gates on noisy quantum computers may be improved when they are implemented using more than two levels of the involved transmons. The main impediments to achieving this potential are the dynamic gate phase errors that cannot be corrected via calibration. The standard tool for countering such phase errors in two-level qubits is the echo protocol, often referred to as the dynamical decoupling sequence, where the evolution of a qubit is punctuated by an even number of X gates. We introduce basis cycling, which is a direct generalization of the qubit echo to general qudits, and provide a framework in which to design gate sequences to produce desired effects using this technique. We then apply basis cycling to a Toffoli gate decomposition incorporating a qutrit and obtain a CCZ gate fidelity of 93.8 +- 0.1 via quantum process tomography on an IBM quantum computer. The gate fidelity remains stable without recalibration even while the resonant frequency of the qutrit fluctuates, highlighting the dynamical nature of phase error cancellation through basis cycling. Our results demonstrate that one of the biggest difficulties in implementing qudit-based gate decompositions on superconducting quantum computers can be systematically overcome when certain conditions are met, and thus open a path toward fulfilling the promise of qudits as gate optimization agents.
△ Less
Submitted 23 May, 2024;
originally announced May 2024.
-
Destratification in the Progenitor Interior of the Mg-rich Supernova Remnant N49B
Authors:
Toshiki Sato,
Kai Matsunaga,
Ryo Sawada,
Koh Takahashi,
Yudai Suwa,
John P. Hughes,
Hiroyuki Uchida,
Takuto Narita,
Hideyuki Umeda
Abstract:
Simulations of pre-supernova evolution suggest that some intense shell burning can be so active that, in extreme cases, it can merge with the outer shell, changing the initial conditions for the supernova explosion. However, such violent activity in the interior of stars has been difficult to confirm from observations of stars. Here we propose that the elemental composition of O-rich ejecta in sup…
▽ More
Simulations of pre-supernova evolution suggest that some intense shell burning can be so active that, in extreme cases, it can merge with the outer shell, changing the initial conditions for the supernova explosion. However, such violent activity in the interior of stars has been difficult to confirm from observations of stars. Here we propose that the elemental composition of O-rich ejecta in supernova remnants can be a tool to test for this kind of intense shell burning activity in the final stages of progenitor evolution. As an example, we discuss the origin of "Mg-rich" ejecta in the supernova remnant N49B. A high Mg/Ne mass ratio $\gtrsim 1$ suggests that the Ne- or O-burning shell has broken into or merged with the outer shell before the collapse. Such Mg-rich (or Ne-poor) ejecta has been identified in some other supernova remnants, supporting the idea that some destratification process, such as a shell merger, does indeed occur in the interiors of some massive stars, although they may not be the majority. Our results suggest that X-ray observations of O-rich ejecta in core-collapse supernova remnants will be a unique tool to probe the shell burning activity during the final stage of a massive star's interior.
△ Less
Submitted 6 March, 2024;
originally announced March 2024.
-
Self-consistent Conditions for $^{26}$Al Injection into Protosolar Disk from a Nearby Supernova
Authors:
Ryo Sawada,
Tetsuo Taki,
Hiroyuki Kurokawa,
Yudai Suwa
Abstract:
The early solar system contained a short-lived radionuclide, $^{26}$Al (its half-life time $t_{1/2} = 0.7$ Myr). The decay energy $^{26}$Al is thought to have controlled the thermal evolution of planetesimals and, possibly, the water contents of planets. Many hypotheses have been proposed for the origin of $^{26}$Al in the solar system. One of the possible hypotheses is the `disk injection scenari…
▽ More
The early solar system contained a short-lived radionuclide, $^{26}$Al (its half-life time $t_{1/2} = 0.7$ Myr). The decay energy $^{26}$Al is thought to have controlled the thermal evolution of planetesimals and, possibly, the water contents of planets. Many hypotheses have been proposed for the origin of $^{26}$Al in the solar system. One of the possible hypotheses is the `disk injection scenario'; when the protoplanetary disk of the solar system had already formed, a nearby $(<1 \,\mathrm{pc})$ supernova injected radioactive material directly into the disk. Such a $^{26}$Al injection hypothesis has been tested so far with limited setups for disk structure and supernova distance, and treated disk disruption and $^{26}$Al injection separately. Here, we revisit this problem to investigate whether there are self-consistent conditions under which the surviving disk radius can receive enough $^{26}$Al which can account for the abundance in the early solar system. We also consider a range of disk mass and structure, $^{26}$Al yields from supernova, and a large dust mass fraction $η_\mathrm{d}$. We find that $^{26}$Al yields of supernova are required as $\gtrsim 2.1\times10^{-3}M_\odot(η_\mathrm{d}/0.2)^{-1}$, challenging to achieve with known possible $^{26}$Al ejection and dust mass fraction ranges. Furthermore, we find that even if the above conditions are met, the supernova flow changes the disk temperature, which may not be consistent with the solar-system record. Our results place a strong constraint on the disk injection scenario. Rather, we suggest that the fresh $^{26}$Al of the early solar system must have been synthesized/injected in other ways.
△ Less
Submitted 1 March, 2024; v1 submitted 4 December, 2023;
originally announced December 2023.
-
Binary Interaction Can Yield a Diversity of Circumstellar Media around Type II Supernova Progenitors
Authors:
Tomoki Matsuoka,
Ryo Sawada
Abstract:
Recent observations of supernovae (SNe) have indicated that a fraction of massive stars possess dense circumstellar medium (CSM) at the moment of their core collapses. They suggest the presence of additional activities of the SN progenitor driving the enhancement of the mass-loss rate, and some physical processes attributing to single star's activities have been considered. In this study, we carry…
▽ More
Recent observations of supernovae (SNe) have indicated that a fraction of massive stars possess dense circumstellar medium (CSM) at the moment of their core collapses. They suggest the presence of additional activities of the SN progenitor driving the enhancement of the mass-loss rate, and some physical processes attributing to single star's activities have been considered. In this study, we carry out binary evolutionary simulations of massive stars with the aim of investigating the CSM structure. We show that the mass-transfer rate in a binary can increase at the beginning of the Roche lobe overflow, and this enhancement would be associated with the structure of the CSM before the explosion. We also illustrate that depending on the orbital period of the binary, the density structure of the CSM can have a diverse distribution including shell-like and cliff-like structures. These characteristic structures appear within the lengthscale of $\sim 10^{17}\,{\rm cm}$ and could be traced by long-term observations of SNe, if the slow velocity of the CSM is assumed ($\sim 10\,{\rm km}\,{\rm s}^{-1}$). Our results highlight the importance of binary interaction in the aspect of reproducing the diversity of the CSM configuration.
△ Less
Submitted 21 December, 2023; v1 submitted 2 July, 2023;
originally announced July 2023.
-
Gravitational Collapse of White Dwarfs to Neutron Stars. I. From Initial Conditions to Explosions with Neutrino-radiation Hydrodynamics Simulations
Authors:
Masamitsu Mori,
Ryo Sawada,
Yudai Suwa,
Ataru Tanikawa,
Kazumi Kashiyama,
Kohta Murase
Abstract:
This paper provides collapses of massive, fully convective, and non-rotating white dwarfs (WDs) formed by accretion-induced collapse or merger-induced collapse and the subsequent explosions with the general relativistic neutrino-radiation hydrodynamics simulations. We produce initial WDs in hydrostatic equilibrium, which have super-Chandrasekhar mass and are about to collapse. The WDs have masses…
▽ More
This paper provides collapses of massive, fully convective, and non-rotating white dwarfs (WDs) formed by accretion-induced collapse or merger-induced collapse and the subsequent explosions with the general relativistic neutrino-radiation hydrodynamics simulations. We produce initial WDs in hydrostatic equilibrium, which have super-Chandrasekhar mass and are about to collapse. The WDs have masses of 1.6$M_\odot$ with different initial central densities specifically at $10^{10}$, $10^{9.6}$, $10^{9.3}$ and $10^{9.0}\,{\rm g\,cm^{-3}}$. First, we check whether initial WDs are stable without weak interactions. Second, we calculate the collapse of WDs with weak interactions. We employ hydrodynamics simulations with Newtonian gravity in the first and second steps. Third, we calculate the formation of neutron stars and accompanying explosions with general relativistic simulations. As a result, WDs with the highest density of $10^{10}\,{\rm g\,cm^{-3}}$ collapse not by weak interactions but by the photodissociation of the iron, and three WDs with low central densities collapse by the electron capture as expected at the second step and succeed in the explosion with a small explosion energy of $\sim 10^{48}$ erg at the third step. By changing the surrounding environment of WDs, we find that there is a minimum value of ejecta masses being $\sim 10^{-5}M_{\odot}$. With the most elaborate simulations of this kind so far, the value is one to two orders of magnitude smaller than previously reported values and is compatible with the estimated ejecta mass from FRB~121102.
△ Less
Submitted 26 March, 2024; v1 submitted 29 June, 2023;
originally announced June 2023.
-
Impacts of the $^{12}\rm{C}\left(α,γ\right)^{16}\!\rm{O}$ reaction rate on $^{56}{\rm Ni}$ nucleosynthesis in pair-instability supernovae
Authors:
Hiroki Kawashimo,
Ryo Sawada,
Yudai Suwa,
Takashi J. Moriya,
Ataru Tanikawa,
Nozomu Tominaga
Abstract:
Nuclear reactions are key to our understanding of stellar evolution, particularly the $^{12}\rm{C}\left(α,γ\right)^{16}\!\rm{O}$ rate, which is known to significantly influence the lower and upper ends of the black hole (BH) mass distribution due to pair-instability supernovae (PISNe). However, these reaction rates have not been sufficiently determined. We use the $\texttt{MESA}$ stellar evolution…
▽ More
Nuclear reactions are key to our understanding of stellar evolution, particularly the $^{12}\rm{C}\left(α,γ\right)^{16}\!\rm{O}$ rate, which is known to significantly influence the lower and upper ends of the black hole (BH) mass distribution due to pair-instability supernovae (PISNe). However, these reaction rates have not been sufficiently determined. We use the $\texttt{MESA}$ stellar evolution code to explore the impact of uncertainty in the $^{12}\rm{C}\left(α,γ\right)^{16}\!\rm{O}$ rate on PISN explosions, focusing on nucleosynthesis and explosion energy by considering the high resolution of the initial mass. Our findings show that the mass of synthesized radioactive nickel ($^{56}{\rm Ni}$) and the explosion energy increase with $^{12}\rm{C}\left(α,γ\right)^{16}\!\rm{O}$ rate for the same initial mass, except in the high-mass edge region. With a high (about twice the $\texttt{STARLIB}$ standard value) rate, the maximum amount of nickel produced falls below 70 $M_\odot$, while with a low rate (about half of the standard value) it increases up to 83.9 $M_\odot$. These results highlight that carbon "preheating" plays a crucial role in PISNe by determining core concentration when a star initiates expansion. Our results also suggest that the onset of the expansion, which means the end of compression, competes with collapse caused by helium photodisintegration, and the maximum mass that can lead to an explosion depends on the $^{12}\rm{C}\left(α,γ\right)^{16}\!\rm{O}$ reaction rate.
△ Less
Submitted 30 May, 2024; v1 submitted 2 June, 2023;
originally announced June 2023.
-
Updating the $^{56}$Ni Problem in Core-collapse Supernova Explosion
Authors:
Ryo Sawada,
Yudai Suwa
Abstract:
Details of the core-collapse supernova (CCSN) explosion mechanism still need to be fully understood. There is an increasing number of successful examples of reproducing explosions in multidimensional hydrodynamic simulations, but subsequent studies pointed out that the growth rates of the explosion energy $\dot{E}_\mathrm{expl}$ of these simulations are insufficient to produce enough $^{56}$Ni to…
▽ More
Details of the core-collapse supernova (CCSN) explosion mechanism still need to be fully understood. There is an increasing number of successful examples of reproducing explosions in multidimensional hydrodynamic simulations, but subsequent studies pointed out that the growth rates of the explosion energy $\dot{E}_\mathrm{expl}$ of these simulations are insufficient to produce enough $^{56}$Ni to match observations. This issue is known as the `$^{56}$Ni problem' in CCSNe. Recently, however, some studies have suggested that this $^{56}$Ni problem is derived from the simplicity of the explosion model. In response, we investigate the effect of the explosion energy growth rate $\dot{E}_\mathrm{expl}$ on the behavior of nucleosynthesis in CCSNe in a more realistic model. We employ the 1D Lagrangian hydrodynamic code, in which we take neutrino heating and cooling terms into account with the light-bulb approximation. We reiterate that, consistent with previous rebuttal studies, there is the $^{56}$Ni problem: Although $^{56}$Ni is synthesized to almost the same mass coordinate independent of $\dot{E}_\mathrm{expl}$, some of the innermost material in the low-$\dot{E}_\mathrm{expl}$ model failed to escape, leading to a shift in the innermost mass coordinate of the ejecta to the outer positions. Comparing our results with observations, we find that while modern slow explosions can, in principle, reproduce observations of standard Type II SNe, this is not possible with stripped-envelope SNe. Our finding places a strong constraint on the explosion mechanism. There are significant differences in the progenitor structures and the explosion mechanism between Type II and stripped-envelope SNe.
△ Less
Submitted 9 January, 2023;
originally announced January 2023.
-
Resolution enhancement of one-dimensional molecular wavefunctions in plane-wave basis via quantum machine learning
Authors:
Rei Sakuma,
Yutaro Iiyama,
Lento Nagano,
Ryu Sawada,
Koji Terashi
Abstract:
Super-resolution is a machine-learning technique in image processing which generates high-resolution images from low-resolution images. Inspired by this approach, we perform a numerical experiment of quantum machine learning, which takes low-resolution (low plane-wave energy cutoff) one-particle molecular wavefunctions in plane-wave basis as input and generates high-resolution (high plane-wave ene…
▽ More
Super-resolution is a machine-learning technique in image processing which generates high-resolution images from low-resolution images. Inspired by this approach, we perform a numerical experiment of quantum machine learning, which takes low-resolution (low plane-wave energy cutoff) one-particle molecular wavefunctions in plane-wave basis as input and generates high-resolution (high plane-wave energy cutoff) wavefunctions in fictitious one-dimensional systems, and study the performance of different learning models. We show that the trained models can generate wavefunctions having higher fidelity values with respect to the ground-truth wavefunctions than a simple linear interpolation, and the results can be improved both qualitatively and quantitatively by including data-dependent information in the ansatz. On the other hand, the accuracy of the current approach deteriorates for wavefunctions calculated in electronic configurations not included in the training dataset. We also discuss the generalization of this approach to many-body electron wavefunctions.
△ Less
Submitted 8 November, 2022;
originally announced November 2022.
-
Initial-State Dependent Optimization of Controlled Gate Operations with Quantum Computer
Authors:
Wonho Jang,
Koji Terashi,
Masahiko Saito,
Christian W. Bauer,
Benjamin Nachman,
Yutaro Iiyama,
Ryunosuke Okubo,
Ryu Sawada
Abstract:
There is no unique way to encode a quantum algorithm into a quantum circuit. With limited qubit counts, connectivity, and coherence times, a quantum circuit optimization is essential to make the best use of near-term quantum devices. We introduce a new circuit optimizer called AQCEL, which aims to remove redundant controlled operations from controlled gates, depending on initial states of the circ…
▽ More
There is no unique way to encode a quantum algorithm into a quantum circuit. With limited qubit counts, connectivity, and coherence times, a quantum circuit optimization is essential to make the best use of near-term quantum devices. We introduce a new circuit optimizer called AQCEL, which aims to remove redundant controlled operations from controlled gates, depending on initial states of the circuit. Especially, the AQCEL can remove unnecessary qubit controls from multi-controlled gates in polynomial computational resources, even when all the relevant qubits are entangled, by identifying zero-amplitude computational basis states using a quantum computer. As a benchmark, the AQCEL is deployed on a quantum algorithm designed to model final state radiation in high energy physics. For this benchmark, we have demonstrated that the AQCEL-optimized circuit can produce equivalent final states with much smaller number of gates. Moreover, when deploying AQCEL with a noisy intermediate scale quantum computer, it efficiently produces a quantum circuit that approximates the original circuit with high fidelity by truncating low-amplitude computational basis states below certain thresholds. Our technique is useful for a wide variety of quantum algorithms, opening up new possibilities to further simplify quantum circuits to be more effective for real devices.
△ Less
Submitted 11 November, 2022; v1 submitted 6 September, 2022;
originally announced September 2022.
-
Constraints on Explosion Timescale of Core-Collapse Supernovae Based on Systematic Analysis of Light Curves
Authors:
Sei Saito,
Masaomi Tanaka,
Ryo Sawada,
Takashi J. Moriya
Abstract:
Explosion mechanism of core-collapse supernovae is not fully understood yet. In this work, we give constraints on the explosion timescale based on $^{56}$Ni synthesized by supernova explosions. First, we systematically analyze multi-band light curves of 82 stripped-envelope supernovae (SESNe) to obtain bolometric light curves, which is among the largest samples of the bolometric light curves of SE…
▽ More
Explosion mechanism of core-collapse supernovae is not fully understood yet. In this work, we give constraints on the explosion timescale based on $^{56}$Ni synthesized by supernova explosions. First, we systematically analyze multi-band light curves of 82 stripped-envelope supernovae (SESNe) to obtain bolometric light curves, which is among the largest samples of the bolometric light curves of SESNe derived from the multi-band spectral energy distribution. We measure the decline timescale and the peak luminosity of the light curves and estimate the ejecta mass ($M_{\rm ej}$) and $^{56}$Ni mass ($M_{\rm Ni}$) to connect the observed properties with the explosion physics. We then carry out one-dimensional hydrodynamics and nucleosynthesis calculations, varying the progenitor mass and the explosion timescale. From the calculations, we show that the maximum $^{56}$Ni mass that $^{56}$Ni-powered SNe can reach is expressed as $M_{\rm Ni} \lesssim 0.2 \ M_{\rm ej}$. Comparing the results from the observations and the calculations, we show that the explosion timescale shorter than 0.3 sec explains the synthesized $^{56}$Ni mass of the majority of the SESNe.
△ Less
Submitted 1 May, 2022;
originally announced May 2022.
-
X-raying the Birth of Binary Neutron Stars and Neutron Star-Black Hole Binaries
Authors:
Kazumi Kashiyama,
Ryo Sawada,
Yudai Suwa
Abstract:
We consider fallback accretion after an ultra-stripped supernova (USSN) that accompanies formation of a binary neutron star (BNS) or a neutron star-black hole binary (NS-BH). The fallback matter initially accretes directly to the nascent NS, while it starts to accrete to the circumbinary disk, typically $0.1\mbox{-}1\, \mathrm{day}$ after the onset of the USSN explosion. The circumbinary disk mass…
▽ More
We consider fallback accretion after an ultra-stripped supernova (USSN) that accompanies formation of a binary neutron star (BNS) or a neutron star-black hole binary (NS-BH). The fallback matter initially accretes directly to the nascent NS, while it starts to accrete to the circumbinary disk, typically $0.1\mbox{-}1\, \mathrm{day}$ after the onset of the USSN explosion. The circumbinary disk mass further accretes, forming mini disks around each compact object, with a super-Eddington rate up to a few years. We show that such a system constitutes a binary ultraluminous X-ray source (ULX), and a fraction of the X rays can emerge through the USSN ejecta. We encourage follow-up observations of USSNe within $\lesssim 100\,\rm Mpc$ and $\sim 100\mbox{-}1,000\,\mathrm{day}$ after the explosion using Chandra, XMM Newton and NuSTAR, which could detect the X-ray counterpart with time variations representing the properties of the nascent compact binary, e.g., the orbital motion of the binary, the spin of the NS, and/or the quasiperiodic oscillation of the mini disks.
△ Less
Submitted 19 April, 2022;
originally announced April 2022.
-
On the energy source of ultra-stripped supernovae
Authors:
Ryo Sawada,
Kazumi Kashiyama,
Yudai Suwa
Abstract:
Ultra-stripped supernovae (USSN) with a relatively low ejecta mass of $\sim0.1M_\odot$ (e.g., iPTF14gqr and SN2019dge) are considered to originate from ultra-stripped carbon-oxygen (CO) cores in close binary systems and are likely to be progenitors of binary neutron stars (BNSs). Here we conduct long-term simulations of USSNe from ultra-stripped progenitors with various masses (…
▽ More
Ultra-stripped supernovae (USSN) with a relatively low ejecta mass of $\sim0.1M_\odot$ (e.g., iPTF14gqr and SN2019dge) are considered to originate from ultra-stripped carbon-oxygen (CO) cores in close binary systems and are likely to be progenitors of binary neutron stars (BNSs). Here we conduct long-term simulations of USSNe from ultra-stripped progenitors with various masses ($1.45\,M_\odot \leq M_\mathrm{CO} \leq 2.0\,M_\odot$) based on results of neutrino-radiation hydrodynamics simulations, and consistently calculate the nucleosynthesis and the SN light curves. We find that a USSN from a more massive progenitor has a larger ejecta mass but a smaller $^{56}$Ni mass mainly due to the fallback, which leads to the light curve being dimmer and slower. By comparing the synthetic light curves with the observed ones, we show that SN2019dge can be solely powered by $^{56}$Ni synthesized during the explosion of a progenitor with $M_\mathrm{CO} \lesssim 1.6\,M_\odot$ while iPTF14gqr cannot be explained by the $^{56}$Ni powered model; $\sim 0.05M_\odot$ of $^{56}$Ni inferred from the light curve fitting is argued to be difficult to synthesize for ultra-stripped progenitors. We consider fallback accretion onto and rotation-powered relativistic wind from the newborn NS as alternative energy sources and show that iPTF14gqr could be powered by a newborn NS with a magnetic field of $B_p \sim 10^{15}\,\mathrm{G}$ and an initial rotation period of $P_i \sim 0.1\,\mathrm{s}$.
△ Less
Submitted 8 February, 2022; v1 submitted 20 December, 2021;
originally announced December 2021.
-
Are stripped envelope supernovae really deficient in $^{56}$Ni?
Authors:
Ryoma Ouchi,
Keiichi Maeda,
Joseph P. Anderson,
Ryo Sawada
Abstract:
Recent works have indicated that the $^{56}$Ni masses estimated for Stripped Envelope SNe (SESNe) are systematically higher than those estimated for SNe II. Although this may suggest a distinct progenitor structure between these types of SNe, the possibility remains that this may be caused by observational bias. One important possible bias is that SESNe with low $^{56}$Ni mass are dim, and therefo…
▽ More
Recent works have indicated that the $^{56}$Ni masses estimated for Stripped Envelope SNe (SESNe) are systematically higher than those estimated for SNe II. Although this may suggest a distinct progenitor structure between these types of SNe, the possibility remains that this may be caused by observational bias. One important possible bias is that SESNe with low $^{56}$Ni mass are dim, and therefore they are more likely to escape detection. By investigating the distributions of the $^{56}$Ni mass and distance for the samples collected from the literature, we find that the current literature SESN sample indeed suffers from a significant observational bias, i.e., objects with low $^{56}$Ni mass - if they exist - will be missed, especially at larger distances. Note, however, that those distant objects in our sample are mostly SNe Ic-BL. We also conducted mock observations assuming that the $^{56}$Ni mass distribution for SESNe is intrinsically the same with that for SNe II. We find that the $^{56}$Ni mass distribution of the detected SESNe samples moves toward higher mass than the assumed intrinsic distribution, because of the difficulty in detecting the low-$^{56}$Ni mass SESNe. These results could explain the general trend of the higher $^{56}$Ni mass distribution (than SNe II) of SESNe found thus far in the literature. However, further finding clear examples of low-$^{56}$Ni mass SESNe ($\leq 0.01M_{\odot}$) is required to add weight to this hypothesis. Also, the objects with high $^{56}$Ni mass ($\gtrsim 0.2 M_{\odot}$) are not explained by our model, which may require an additional explanation.
△ Less
Submitted 1 September, 2021;
originally announced September 2021.
-
Measurement-Free Ultrafast Quantum Error Correction by Using Multi-Controlled Gates in Higher-Dimensional State Space
Authors:
Toshiaki Inada,
Wonho Jang,
Yutaro Iiyama,
Koji Terashi,
Ryu Sawada,
Junichi Tanaka,
Shoji Asai
Abstract:
Quantum error correction is a crucial step beyond the current noisy-intermediate-scale quantum device towards fault-tolerant quantum computing. However, most of the error corrections ever demonstrated rely on post-selection of events or post-correction of states, based on measurement results repeatedly recorded during circuit execution. On the other hand, real-time error correction is supposed to…
▽ More
Quantum error correction is a crucial step beyond the current noisy-intermediate-scale quantum device towards fault-tolerant quantum computing. However, most of the error corrections ever demonstrated rely on post-selection of events or post-correction of states, based on measurement results repeatedly recorded during circuit execution. On the other hand, real-time error correction is supposed to be performed through classical feedforward of the measurement results to data qubits. It provides unavoidable latency from conditional electronics that would limit the scalability of the next-generation quantum processors. Here we propose a new approach to real-time error correction that is free from measurement and realized by using multi-controlled gates based on higher-dimensional state space. Specifically, we provide a series of novel decompositions of a Toffoli gate by using the lowest three energy levels of a transmon that significantly reduce the number of two-qubit gates and discuss their essential features, such as extendability to an arbitrary number of control qubits, the necessity of exclusively controlled NOT gates, and usefulness of their incomplete variants. Combined with the recently demonstrated schemes of fast two-qubit gates and all-microwave qubit reset, it would substantially shorten the time required for error correction and resetting ancilla qubits compared to a measurement-based approach and provide an error correction rate of $\gtrsim1$~MHz with high accuracy for three-qubit bit- and phase-flip errors.
△ Less
Submitted 6 September, 2021; v1 submitted 31 August, 2021;
originally announced September 2021.
-
Towards Universal Neural Network Potential for Material Discovery Applicable to Arbitrary Combination of 45 Elements
Authors:
So Takamoto,
Chikashi Shinagawa,
Daisuke Motoki,
Kosuke Nakago,
Wenwen Li,
Iori Kurata,
Taku Watanabe,
Yoshihiro Yayama,
Hiroki Iriguchi,
Yusuke Asano,
Tasuku Onodera,
Takafumi Ishii,
Takao Kudo,
Hideki Ono,
Ryohto Sawada,
Ryuichiro Ishitani,
Marc Ong,
Taiki Yamaguchi,
Toshiki Kataoka,
Akihide Hayashi,
Nontawat Charoenphakdee,
Takeshi Ibuka
Abstract:
Computational material discovery is under intense study owing to its ability to explore the vast space of chemical systems. Neural network potentials (NNPs) have been shown to be particularly effective in conducting atomistic simulations for such purposes. However, existing NNPs are generally designed for narrow target materials, making them unsuitable for broader applications in material discover…
▽ More
Computational material discovery is under intense study owing to its ability to explore the vast space of chemical systems. Neural network potentials (NNPs) have been shown to be particularly effective in conducting atomistic simulations for such purposes. However, existing NNPs are generally designed for narrow target materials, making them unsuitable for broader applications in material discovery. To overcome this issue, we have developed a universal NNP called PreFerred Potential (PFP), which is able to handle any combination of 45 elements. Particular emphasis is placed on the datasets, which include a diverse set of virtual structures used to attain the universality. We demonstrated the applicability of PFP in selected domains: lithium diffusion in LiFeSO${}_4$F, molecular adsorption in metal-organic frameworks, an order-disorder transition of Cu-Au alloys, and material discovery for a Fischer-Tropsch catalyst. They showcase the power of PFP, and this technology provides a highly useful tool for material discovery.
△ Less
Submitted 1 April, 2022; v1 submitted 28 June, 2021;
originally announced June 2021.
-
Optimization on Planning of Trajectory and Control of Autonomous Berthing and Unberthing for the Realistic Port Geometry
Authors:
Yoshiki Miyauchi,
Ryohei Sawada,
Youhei Akimoto,
Naoya Umeda,
Atsuo Maki
Abstract:
To realize autonomous ship**, autonomous berthing and unberthing are some of the technical challenges. In the past, numerous research have been done on the optimization of trajectory planning of berthing problems. However, these studies assumed only a simple berth and did not consider obstacles. Optimization of trajectory planning on berthing and unberthing in actual ports must consider the spat…
▽ More
To realize autonomous ship**, autonomous berthing and unberthing are some of the technical challenges. In the past, numerous research have been done on the optimization of trajectory planning of berthing problems. However, these studies assumed only a simple berth and did not consider obstacles. Optimization of trajectory planning on berthing and unberthing in actual ports must consider the spatial constraints and maintain sufficient distance to obstacles. The main contributions of this study are as follows: (i) a collision avoidance algorithm based on the ship domain which has variable size by the ship speed is proposed, to include the spatial constraints to optimization; (ii) the effect of wind disturbance is taken into account to the trajectory planning to make a feasible trajectory based on the capacity limit of actuators; (iii) showing that the optimization method for berthing is also eligible for the unberthing, which has been almost neglected; (iv) waypoints are included to the optimization process, to make optimization easier on practical applications. The authors tested the proposed method on two existing ports. The proposed method performed well on both the berthing and the unberthing problem and optimized the control input and the trajectory while avoiding collision with the complex obstacles.
△ Less
Submitted 12 January, 2022; v1 submitted 4 June, 2021;
originally announced June 2021.
-
Event Classification with Multi-step Machine Learning
Authors:
Masahiko Saito,
Tomoe Kishimoto,
Yuya Kaneta,
Taichi Itoh,
Yoshiaki Umeda,
Junichi Tanaka,
Yutaro Iiyama,
Ryu Sawada,
Koji Terashi
Abstract:
The usefulness and value of Multi-step Machine Learning (ML), where a task is organized into connected sub-tasks with known intermediate inference goals, as opposed to a single large model learned end-to-end without intermediate sub-tasks, is presented. Pre-optimized ML models are connected and better performance is obtained by re-optimizing the connected one. The selection of an ML model from sev…
▽ More
The usefulness and value of Multi-step Machine Learning (ML), where a task is organized into connected sub-tasks with known intermediate inference goals, as opposed to a single large model learned end-to-end without intermediate sub-tasks, is presented. Pre-optimized ML models are connected and better performance is obtained by re-optimizing the connected one. The selection of an ML model from several small ML model candidates for each sub-task has been performed by using the idea based on Neural Architecture Search (NAS). In this paper, Differentiable Architecture Search (DARTS) and Single Path One-Shot NAS (SPOS-NAS) are tested, where the construction of loss functions is improved to keep all ML models smoothly learning. Using DARTS and SPOS-NAS as an optimization and selection as well as the connections for multi-step machine learning systems, we find that (1) such a system can quickly and successfully select highly performant model combinations, and (2) the selected models are consistent with baseline algorithms, such as grid search, and their outputs are well controlled.
△ Less
Submitted 4 June, 2021;
originally announced June 2021.
-
Quantum Gate Pattern Recognition and Circuit Optimization for Scientific Applications
Authors:
Wonho Jang,
Koji Terashi,
Masahiko Saito,
Christian W. Bauer,
Benjamin Nachman,
Yutaro Iiyama,
Tomoe Kishimoto,
Ryunosuke Okubo,
Ryu Sawada,
Junichi Tanaka
Abstract:
There is no unique way to encode a quantum algorithm into a quantum circuit. With limited qubit counts, connectivities, and coherence times, circuit optimization is essential to make the best use of near-term quantum devices. We introduce two separate ideas for circuit optimization and combine them in a multi-tiered quantum circuit optimization protocol called AQCEL. The first ingredient is a tech…
▽ More
There is no unique way to encode a quantum algorithm into a quantum circuit. With limited qubit counts, connectivities, and coherence times, circuit optimization is essential to make the best use of near-term quantum devices. We introduce two separate ideas for circuit optimization and combine them in a multi-tiered quantum circuit optimization protocol called AQCEL. The first ingredient is a technique to recognize repeated patterns of quantum gates, opening up the possibility of future hardware co-optimization. The second ingredient is an approach to reduce circuit complexity by identifying zero- or low-amplitude computational basis states and redundant gates. As a demonstration, AQCEL is deployed on an iterative and efficient quantum algorithm designed to model final state radiation in high energy physics. For this algorithm, our optimization scheme brings a significant reduction in the gate count without losing any accuracy compared to the original circuit. Additionally, we have investigated whether this can be demonstrated on a quantum computer using polynomial resources. Our technique is generic and can be useful for a wide variety of quantum algorithms.
△ Less
Submitted 5 August, 2021; v1 submitted 19 February, 2021;
originally announced February 2021.
-
An Improvement of Object Detection Performance using Multi-step Machine Learnings
Authors:
Tomoe Kishimoto,
Masahiko Saito,
Junichi Tanaka,
Yutaro Iiyama,
Ryu Sawada,
Koji Terashi
Abstract:
Connecting multiple machine learning models into a pipeline is effective for handling complex problems. By breaking down the problem into steps, each tackled by a specific component model of the pipeline, the overall solution can be made accurate and explainable. This paper describes an enhancement of object detection based on this multi-step concept, where a post-processing step called the calibr…
▽ More
Connecting multiple machine learning models into a pipeline is effective for handling complex problems. By breaking down the problem into steps, each tackled by a specific component model of the pipeline, the overall solution can be made accurate and explainable. This paper describes an enhancement of object detection based on this multi-step concept, where a post-processing step called the calibration model is introduced. The calibration model consists of a convolutional neural network, and utilizes rich contextual information based on the domain knowledge of the input. Improvements of object detection performance by 0.8-1.9 in average precision metric over existing object detectors have been observed using the new model.
△ Less
Submitted 19 January, 2021;
originally announced January 2021.
-
A Consistent Modeling of Neutrino-driven Wind with Accretion Flow onto a Protoneutron Star and its Implications for $^{56}$Ni Production
Authors:
Ryo Sawada,
Yudai Suwa
Abstract:
Details of the explosion mechanism of core-collapse supernovae (CCSNe) are not yet fully understood. There is now an increasing number of successful examples of reproducing explosions in the first-principles simulations, which have shown a slow increase of explosion energy. However, it was recently pointed out that the growth rates of the explosion energy of these simulations are insufficient to p…
▽ More
Details of the explosion mechanism of core-collapse supernovae (CCSNe) are not yet fully understood. There is now an increasing number of successful examples of reproducing explosions in the first-principles simulations, which have shown a slow increase of explosion energy. However, it was recently pointed out that the growth rates of the explosion energy of these simulations are insufficient to produce enough $^{56}$Ni mass to account for observations. We refer to this issue as the `nickel mass problem' (Ni problem, hereafter) in this paper. The neutrino-driven wind is suggested as one of the most promising candidates for the solution to the Ni problem in previous literature, but a multi-dimensional simulation for this is computationally too expensive to allow long-term investigations. In this paper, we first built a consistent model of the neutrino-driven wind with an accretion flow onto a protoneutron star (PNS), by connecting a steady-state solution of the neutrino-driven wind and a phenomenological mass accretion model. Comparing the results of our model with the results of first-principles simulations, we find that the total ejectable amount of the neutrino-driven wind is roughly determined within $\sim$ 1 sec from the onset of the explosion and the supplementable amount at a late phase ($t_e \gtrsim 1$ sec) remains $M_\mathrm{ej} \lesssim 0.01M_\odot$ at most. Our conclusion is that it is difficult to solve the Ni problem, by continuous injection of $^{56}$Ni by the neutrino-driven wind. We suggest that the total amount of synthesized $^{56}$Ni can be estimated robustly if simulations are followed up to $\sim 2$ seconds.
△ Less
Submitted 16 December, 2020; v1 submitted 12 October, 2020;
originally announced October 2020.
-
Data Transfer Approaches to Improve Seq-to-Seq Retrosynthesis
Authors:
Katsuhiko Ishiguro,
Kazuya Ujihara,
Ryohto Sawada,
Hirotaka Akita,
Masaaki Kotera
Abstract:
Retrosynthesis is a problem to infer reactant compounds to synthesize a given product compound through chemical reactions. Recent studies on retrosynthesis focus on proposing more sophisticated prediction models, but the dataset to feed the models also plays an essential role in achieving the best generalizing models. Generally, a dataset that is best suited for a specific task tends to be small.…
▽ More
Retrosynthesis is a problem to infer reactant compounds to synthesize a given product compound through chemical reactions. Recent studies on retrosynthesis focus on proposing more sophisticated prediction models, but the dataset to feed the models also plays an essential role in achieving the best generalizing models. Generally, a dataset that is best suited for a specific task tends to be small. In such a case, it is the standard solution to transfer knowledge from a large or clean dataset in the same domain. In this paper, we conduct a systematic and intensive examination of data transfer approaches on end-to-end generative models, in application to retrosynthesis. Experimental results show that typical data transfer methods can improve test prediction scores of an off-the-shelf Transformer baseline model. Especially, the pre-training plus fine-tuning approach boosts the accuracy scores of the baseline, achieving the new state-of-the-art. In addition, we conduct a manual inspection for the erroneous prediction results. The inspection shows that the pre-training plus fine-tuning models can generate chemically appropriate or sensible proposals in almost all cases.
△ Less
Submitted 2 October, 2020;
originally announced October 2020.
-
Search for lepton flavour violating muon decay mediated by a new light particle in the MEG experiment
Authors:
A. M. Baldini,
F. Berg,
M. Biasotti,
G. Boca,
P. W. Cattaneo,
G. Cavoto,
F. Cei,
M. Chiappini,
G. Chiarello,
C. Chiri,
A. Corvaglia,
A. de Bari,
M. De Gerone,
M. Francesconi,
L. Galli,
F. Gatti,
F. Grancagnolo,
M. Grassi,
D. N. Grigoriev,
M. Hildebrandt,
Z. Hodge,
K. Ieki,
F. Ignatov,
R. Iwai,
T. Iwamoto
, et al. (46 additional authors not shown)
Abstract:
We present the first direct search for lepton flavour violating muon decay mediated by a new light particle X, $μ^+ \to \mathrm{e}^+\mathrm{X}, \mathrm{X} \to γγ$. This search uses a dataset resulting from $7.5\times 10^{14}$ stopped muons collected by the MEG experiment at the Paul Scherrer Institut in the period 2009--2013. No significant excess is found in the mass region 20--45 MeV/c$^2$ for l…
▽ More
We present the first direct search for lepton flavour violating muon decay mediated by a new light particle X, $μ^+ \to \mathrm{e}^+\mathrm{X}, \mathrm{X} \to γγ$. This search uses a dataset resulting from $7.5\times 10^{14}$ stopped muons collected by the MEG experiment at the Paul Scherrer Institut in the period 2009--2013. No significant excess is found in the mass region 20--45 MeV/c$^2$ for lifetimes below 40 ps, and we set the most stringent branching ratio upper limits in the mass region of 20--40 MeV/c$^2$, down to $\mathcal{O}(10^{-11})$ at 90\% confidence level.
△ Less
Submitted 8 November, 2020; v1 submitted 1 May, 2020;
originally announced May 2020.
-
Event Classification with Quantum Machine Learning in High-Energy Physics
Authors:
Koji Terashi,
Michiru Kaneda,
Tomoe Kishimoto,
Masahiko Saito,
Ryu Sawada,
Junichi Tanaka
Abstract:
We present studies of quantum algorithms exploiting machine learning to classify events of interest from background events, one of the most representative machine learning applications in high-energy physics. We focus on variational quantum approach to learn the properties of input data and evaluate the performance of the event classification using both simulators and quantum computing devices. Co…
▽ More
We present studies of quantum algorithms exploiting machine learning to classify events of interest from background events, one of the most representative machine learning applications in high-energy physics. We focus on variational quantum approach to learn the properties of input data and evaluate the performance of the event classification using both simulators and quantum computing devices. Comparison of the performance with standard multi-variate classification techniques based on a boosted-decision tree and a deep neural network using classical computers shows that the quantum algorithm has comparable performance with the standard techniques at the considered ranges of the number of input variables and the size of training samples. The variational quantum algorithm is tested with quantum computers, demonstrating that the discrimination of interesting events from background is feasible. Characteristic behaviors observed during a learning process using quantum circuits with extended gate structures are discussed, as well as the implications of the current performance to the application in high-energy physics experiments.
△ Less
Submitted 5 January, 2021; v1 submitted 23 February, 2020;
originally announced February 2020.
-
Nucleosynthesis Constraints on the Energy Growth Timescale of a Core-collapse Supernova Explosion
Authors:
Ryo Sawada,
Keiichi Maeda
Abstract:
Details of the explosion mechanism of core-collapse supernovae (CCSNe) are not yet fully understood. There is an increasing number of numerical examples by ab-initio core-collapse simulations leading to an explosion. Most, if not all, of the ab-initio core-collapse simulations represent a `slow' explosion in which the observed explosion energy ($\sim 10^{51}$ ergs) is reached in a timescale of…
▽ More
Details of the explosion mechanism of core-collapse supernovae (CCSNe) are not yet fully understood. There is an increasing number of numerical examples by ab-initio core-collapse simulations leading to an explosion. Most, if not all, of the ab-initio core-collapse simulations represent a `slow' explosion in which the observed explosion energy ($\sim 10^{51}$ ergs) is reached in a timescale of $\gtrsim1$ second. It is, however, unclear whether such a slow explosion is consistent with observations. In this work, by performing nuclear reaction network calculations for a range of the explosion timescale $t_{\rm grow}$, from the rapid to slow models, we aim at providing nucleosynthetic diagnostics on the explosion timescale. We employ one-dimensional hydrodynamic and nucleosynthesis simulations above the proto-neutron star core, by parameterizing the nature of the explosion mechanism by $t_{\rm grow}$. The results are then compared to various observational constraints; the masses of $^{56}$Ni derived for typical CCSNe, the masses of $^{57}$Ni and $^{44}$Ti observed for SN 1987A, and the abundance patterns observed in extremely metal-poor stars. We find that these observational constraints are consistent with the `rapid' explosion ($t_{\rm grow} \lesssim 250$ ms), and especially the best match is found for a nearly instantaneous explosion ($t_{\rm grow} \lesssim 50$ ms). Our finding places a strong constraint on the explosion mechanism; the slow mechanism ($t_{\rm grow} \gtrsim 1000$ ms) would not satisfy these constraints, and the ab-inito simulations will need to realize a rapid explosion.
△ Less
Submitted 27 December, 2019; v1 submitted 15 October, 2019;
originally announced October 2019.
-
Extractive Summarization via Weighted Dissimilarity and Importance Aligned Key Iterative Algorithm
Authors:
Ryohto Sawada
Abstract:
We present importance aligned key iterative algorithm for extractive summarization that is faster than conventional algorithms kee** its accuracy. The computational complexity of our algorithm is O($SNlogN$) to summarize original $N$ sentences into final $S$ sentences. Our algorithm maximizes the weighted dissimilarity defined by the product of importance and cosine dissimilarity so that the sum…
▽ More
We present importance aligned key iterative algorithm for extractive summarization that is faster than conventional algorithms kee** its accuracy. The computational complexity of our algorithm is O($SNlogN$) to summarize original $N$ sentences into final $S$ sentences. Our algorithm maximizes the weighted dissimilarity defined by the product of importance and cosine dissimilarity so that the summary represents the document and at the same time the sentences of the summary are not similar to each other. The weighted dissimilarity is heuristically maximized by iterative greedy search and binary search to the sentences ordered by importance. We finally show a benchmark score based on summarization of customer reviews of products, which highlights the quality of our algorithm comparable to human and existing algorithms. We provide the source code of our algorithm on github https://github.com/qhapaq-49/imakita .
△ Less
Submitted 15 May, 2019;
originally announced June 2019.
-
Searching for long-lived particles beyond the Standard Model at the Large Hadron Collider
Authors:
Juliette Alimena,
James Beacham,
Martino Borsato,
Yangyang Cheng,
Xabier Cid Vidal,
Giovanna Cottin,
Albert De Roeck,
Nishita Desai,
David Curtin,
Jared A. Evans,
Simon Knapen,
Sabine Kraml,
Andre Lessa,
Zhen Liu,
Sascha Mehlhase,
Michael J. Ramsey-Musolf,
Heather Russell,
Jessie Shelton,
Brian Shuve,
Monica Verducci,
Jose Zurita,
Todd Adams,
Michael Adersberger,
Cristiano Alpigiani,
Artur Apresyan
, et al. (176 additional authors not shown)
Abstract:
Particles beyond the Standard Model (SM) can generically have lifetimes that are long compared to SM particles at the weak scale. When produced at experiments such as the Large Hadron Collider (LHC) at CERN, these long-lived particles (LLPs) can decay far from the interaction vertex of the primary proton-proton collision. Such LLP signatures are distinct from those of promptly decaying particles t…
▽ More
Particles beyond the Standard Model (SM) can generically have lifetimes that are long compared to SM particles at the weak scale. When produced at experiments such as the Large Hadron Collider (LHC) at CERN, these long-lived particles (LLPs) can decay far from the interaction vertex of the primary proton-proton collision. Such LLP signatures are distinct from those of promptly decaying particles that are targeted by the majority of searches for new physics at the LHC, often requiring customized techniques to identify, for example, significantly displaced decay vertices, tracks with atypical properties, and short track segments. Given their non-standard nature, a comprehensive overview of LLP signatures at the LHC is beneficial to ensure that possible avenues of the discovery of new physics are not overlooked. Here we report on the joint work of a community of theorists and experimentalists with the ATLAS, CMS, and LHCb experiments --- as well as those working on dedicated experiments such as MoEDAL, milliQan, MATHUSLA, CODEX-b, and FASER --- to survey the current state of LLP searches at the LHC, and to chart a path for the development of LLP searches into the future, both in the upcoming Run 3 and at the High-Luminosity LHC. The work is organized around the current and future potential capabilities of LHC experiments to generally discover new LLPs, and takes a signature-based approach to surveying classes of models that give rise to LLPs rather than emphasizing any particular theory motivation. We develop a set of simplified models; assess the coverage of current searches; document known, often unexpected backgrounds; explore the capabilities of proposed detector upgrades; provide recommendations for the presentation of search results; and look towards the newest frontiers, namely high-multiplicity "dark showers", highlighting opportunities for expanding the LHC reach for these signals.
△ Less
Submitted 11 March, 2019;
originally announced March 2019.
-
Materials development by interpretable machine learning
Authors:
Yuma Iwasaki,
Ryoto Sawada,
Valentin Stanev,
Masahiko Ishida,
Akihiro Kirihara,
Yasutomo Omori,
Hiroko Someya,
Ichiro Takeuchi,
Eiji Saitoh,
Yorozu Shinichi
Abstract:
Machine learning technologies are expected to be great tools for scientific discoveries. In particular, materials development (which has brought a lot of innovation by finding new and better functional materials) is one of the most attractive scientific fields. To apply machine learning to actual materials development, collaboration between scientists and machine learning is becoming inevitable. H…
▽ More
Machine learning technologies are expected to be great tools for scientific discoveries. In particular, materials development (which has brought a lot of innovation by finding new and better functional materials) is one of the most attractive scientific fields. To apply machine learning to actual materials development, collaboration between scientists and machine learning is becoming inevitable. However, such collaboration has been restricted so far due to black box machine learning, in which it is difficult for scientists to interpret the data-driven model from the viewpoint of material science and physics. Here, we show a material development success story that was achieved by good collaboration between scientists and one type of interpretable (explainable) machine learning called factorized asymptotic Bayesian inference hierarchical mixture of experts (FAB/HMEs). Based on material science and physics, we interpreted the data-driven model constructed by the FAB/HMEs, so that we discovered surprising correlation and knowledge about thermoelectric material. Guided by this, we carried out actual material synthesis that led to identification of a novel spin-driven thermoelectric material with the largest thermopower to date.
△ Less
Submitted 6 March, 2019;
originally announced March 2019.
-
Model-Free Cluster Analysis of Physical Property Data using Information Maximizing Self-Argument Training
Authors:
Ryohto Sawada,
Yuma Iwasaki,
Masahiko Ishida
Abstract:
We present the semi-supervised IMSAT, a versatile classification method that works without labeled data and can be tuned by little additional information. We demonstrate how semi-supervised IMSAT can classify XRD patterns and thermoelectric hysteresis curves in the same way even though their shape and dimensions are different. Our algorithm will accelerate automation of big data collection and ope…
▽ More
We present the semi-supervised IMSAT, a versatile classification method that works without labeled data and can be tuned by little additional information. We demonstrate how semi-supervised IMSAT can classify XRD patterns and thermoelectric hysteresis curves in the same way even though their shape and dimensions are different. Our algorithm will accelerate automation of big data collection and open a way to study artificial intelligent driven material development.
△ Less
Submitted 1 March, 2019;
originally announced March 2019.
-
Studying gaugino masses in supersymmetric model at future 100 TeV $pp$ collider
Authors:
Shoji Asai,
So Chigusa,
Toshiaki Kaji,
Takeo Moroi,
Masahiko Saito,
Ryu Sawada,
Junichi Tanaka,
Koji Terashi,
Kenta Uno
Abstract:
We discuss prospects of studying supersymmetric model at future $pp$ circular collider (FCC) with its centre-of-mass energy of $\sim 100\ {\rm TeV}$. We pay particular attention to the model in which Wino is lighter than other supersymmetric particles and all the gauginos are within the kinematical reach of the FCC, which is the case in a large class of so-called pure gravity mediation model based…
▽ More
We discuss prospects of studying supersymmetric model at future $pp$ circular collider (FCC) with its centre-of-mass energy of $\sim 100\ {\rm TeV}$. We pay particular attention to the model in which Wino is lighter than other supersymmetric particles and all the gauginos are within the kinematical reach of the FCC, which is the case in a large class of so-called pure gravity mediation model based on anomaly mediated supersymmetry breaking. In such a class of model, charged Wino becomes long-lived with its decay length of $\sim 6\ {\rm cm}$, and the charged Wino tracks may be identified in particular by the inner pixel detector; the charged Wino tracks can be used not only for the discrimination of standard model backgrounds but also for the event reconstructions. We show that precise determinations of the Bino, Wino, and gluino masses are possible at the FCC. For such measurements, information about the charged Wino tracks, including the one about the velocity of the charged Wino using the time of the hit at the pixel detector, is crucial. With the measurements of the gaugino masses in the pure gravity mediation model, we have an access to more fundamental parameters like the gravitino mass.
△ Less
Submitted 28 May, 2019; v1 submitted 29 January, 2019;
originally announced January 2019.
-
Discovery reach for wino and higgsino dark matter with a disappearing track signature at a 100 TeV $pp$ collider
Authors:
Masahiko Saito,
Ryu Sawada,
Koji Terashi,
Shoji Asai
Abstract:
Within the theory of supersymmetry, the lightest neutralino is a dark matter candidate and is often assumed to be the lightest supersymmetric particle (LSP) as well. If the neutral wino or higgsino is dark matter, the upper limit of the LSP mass is determined by the observed relic density of dark matter. If the LSP is a nearly-pure neutral state of the wino or higgsino, the lightest chargino state…
▽ More
Within the theory of supersymmetry, the lightest neutralino is a dark matter candidate and is often assumed to be the lightest supersymmetric particle (LSP) as well. If the neutral wino or higgsino is dark matter, the upper limit of the LSP mass is determined by the observed relic density of dark matter. If the LSP is a nearly-pure neutral state of the wino or higgsino, the lightest chargino state is expected to have a significant lifetime due to a tiny mass difference between the LSP and the chargino. This article presents discovery potential of the 100 TeV future circular hadron collider (FCC) for the wino and higgsino dark matter using a disappearing-track signature. The search strategy to extend the discovery reach to the thermal limits of wino/higgsino dark matter is discussed with detailed studies on the background rate and the reference design of the FCC-hadron detector under possible running scenarios of the FCC-hadron machine. A proposal of modifying the detector layout and several ideas to improve the sensitivity further are also discussed.
△ Less
Submitted 17 June, 2019; v1 submitted 9 January, 2019;
originally announced January 2019.
-
Beyond the Standard Model Physics at the HL-LHC and HE-LHC
Authors:
X. Cid Vidal,
M. D'Onofrio,
P. J. Fox,
R. Torre,
K. A. Ulmer,
A. Aboubrahim,
A. Albert,
J. Alimena,
B. C. Allanach,
C. Alpigiani,
M. Altakach,
S. Amoroso,
J. K. Anders,
J. Y. Araz,
A. Arbey,
P. Azzi,
I. Babounikau,
H. Baer,
M. J. Baker,
D. Barducci,
V. Barger,
O. Baron,
L. Barranco Navarro,
M. Battaglia,
A. Bay
, et al. (272 additional authors not shown)
Abstract:
This is the third out of five chapters of the final report [1] of the Workshop on Physics at HL-LHC, and perspectives on HE-LHC [2]. It is devoted to the study of the potential, in the search for Beyond the Standard Model (BSM) physics, of the High Luminosity (HL) phase of the LHC, defined as $3~\mathrm{ab}^{-1}$ of data taken at a centre-of-mass energy of $14~\mathrm{TeV}$, and of a possible futu…
▽ More
This is the third out of five chapters of the final report [1] of the Workshop on Physics at HL-LHC, and perspectives on HE-LHC [2]. It is devoted to the study of the potential, in the search for Beyond the Standard Model (BSM) physics, of the High Luminosity (HL) phase of the LHC, defined as $3~\mathrm{ab}^{-1}$ of data taken at a centre-of-mass energy of $14~\mathrm{TeV}$, and of a possible future upgrade, the High Energy (HE) LHC, defined as $15~\mathrm{ab}^{-1}$ of data at a centre-of-mass energy of $27~\mathrm{TeV}$. We consider a large variety of new physics models, both in a simplified model fashion and in a more model-dependent one. A long list of contributions from the theory and experimental (ATLAS, CMS, LHCb) communities have been collected and merged together to give a complete, wide, and consistent view of future prospects for BSM physics at the considered colliders. On top of the usual standard candles, such as supersymmetric simplified models and resonances, considered for the evaluation of future collider potentials, this report contains results on dark matter and dark sectors, long lived particles, leptoquarks, sterile neutrinos, axion-like particles, heavy scalars, vector-like quarks, and more. Particular attention is placed, especially in the study of the HL-LHC prospects, to the detector upgrades, the assessment of the future systematic uncertainties, and new experimental techniques. The general conclusion is that the HL-LHC, on top of allowing to extend the present LHC mass and coupling reach by $20-50\%$ on most new physics scenarios, will also be able to constrain, and potentially discover, new physics that is presently unconstrained. Moreover, compared to the HL-LHC, the reach in most observables will generally more than double at the HE-LHC, which may represent a good candidate future facility for a final test of TeV-scale new physics.
△ Less
Submitted 13 August, 2019; v1 submitted 19 December, 2018;
originally announced December 2018.
-
Large-Area MPPC with Enhanced VUV Sensitivity for Liquid Xenon Scintillation Detector
Authors:
K. Ieki,
T. Iwamoto,
D. Kaneko,
S. Kobayashi,
N. Matsuzawa,
T. Mori,
S. Ogawa,
R. Onda,
W. Ootani,
R. Sawada,
K. Sato,
R. Yamada
Abstract:
A large-area Multi-Pixel Photon Counter (MPPC) sensitive to vacuum ultra violet (VUV) light has been developed for the liquid xenon (LXe) scintillation detector of the MEG II experiment. The LXe detector is designed to detect the 52.8\,MeV photon from the lepton flavour violating decay $μ^+ \to \mathrm{e}^+ γ$ and is based on $900\,\ell$ LXe with a highly granular scintillation readout by 4092 VUV…
▽ More
A large-area Multi-Pixel Photon Counter (MPPC) sensitive to vacuum ultra violet (VUV) light has been developed for the liquid xenon (LXe) scintillation detector of the MEG II experiment. The LXe detector is designed to detect the 52.8\,MeV photon from the lepton flavour violating decay $μ^+ \to \mathrm{e}^+ γ$ and is based on $900\,\ell$ LXe with a highly granular scintillation readout by 4092 VUV-MPPCs with an active area of $139\,\mathrm{mm}^2$ each, totalling $0.57\,\mathrm{m}^2$. The VUV-MPPC shows an excellent performance in LXe, which includes a high photon detection efficiency (PDE) up to 21\% for the LXe scintillation light in the VUV range, a high gain, a low probability of the optical cross-talk and the after-pulsing, a low dark count rate and a good single photoelectron resolution. The large active area of the VUV-MPPC is formed by connecting four independent small VUV-MPPC chips in series to avoid the increase of the sensor capacitance and thus, to have a short pulse-decay-time, which is crucial for high rate experiments. Performance tests of 4180 VUV-MPPCs produced for the LXe detector were also carried out at room temperature prior to the installation to the detector and all of them with only a few exceptions were found to work properly. The design and performance of the VUV-MPPC are described in detail as well as the results from the performance tests at room temperature.
△ Less
Submitted 5 February, 2019; v1 submitted 23 September, 2018;
originally announced September 2018.
-
Machine-learning guided discovery of a high-performance spin-driven thermoelectric material
Authors:
Yuma Iwasaki,
Ichiro Takeuchi,
Valentin Stanev,
Aaron Gilad Kusne,
Masahiko Ishida,
Akihiro Kirihara,
Kazuki Ihara,
Ryohto Sawada,
Koichi Terashima,
Hiroko Someya,
Ken-ichi Uchida,
Shinichi Yorozu,
Eiji Saitoh
Abstract:
Thermoelectric conversion using Seebeck effect for generation of electricity is becoming an indispensable technology for energy harvesting and smart thermal management. Recently, the spin-driven thermoelectric effects (STEs), which employ emerging phenomena such as the spin-Seebeck effect (SSE) and the anomalous Nernst effect (ANE), have garnered much attention as a promising path towards low cost…
▽ More
Thermoelectric conversion using Seebeck effect for generation of electricity is becoming an indispensable technology for energy harvesting and smart thermal management. Recently, the spin-driven thermoelectric effects (STEs), which employ emerging phenomena such as the spin-Seebeck effect (SSE) and the anomalous Nernst effect (ANE), have garnered much attention as a promising path towards low cost and versatile thermoelectric technology with easily scalable manufacturing. However, progress in development of STE devices is hindered by the lack of understanding of the mechanism and materials parameters that govern the STEs. To address this problem, we enlist machine learning modeling to establish the key physical parameters controlling SSE. Guided by these models, we have carried out a high-throughput experiment which led to the identification of a novel STE material with a thermopower an order of magnitude larger than that of the current generation STE devices.
△ Less
Submitted 6 May, 2018;
originally announced May 2018.
-
Boosting Material Modeling Using Game Tree Search
Authors:
Ryohto Sawada,
Yuma Iwasaki,
Masahiko Ishida
Abstract:
We demonstrate a heuristic optimization algorithm based on the game tree search for multi-component materials design. The algorithm searches for the largest spin polarization of seven-component Heusler alloys. The algorithm can find the peaks quickly and is more robust against local optima than Bayesian optimization approaches using the expected improvement or upper confidence bound approaches. We…
▽ More
We demonstrate a heuristic optimization algorithm based on the game tree search for multi-component materials design. The algorithm searches for the largest spin polarization of seven-component Heusler alloys. The algorithm can find the peaks quickly and is more robust against local optima than Bayesian optimization approaches using the expected improvement or upper confidence bound approaches. We also investigate Heusler alloys including anti-site disorder and show that [Fe$_{0.9}$Co$_{0.1}$]$_{2}$Cr$_{0.95}$Mn$_{0.05}$Si$_{0.3}$Ge$_{0.7}$ has the potential to be a high spin polarized material with robustness against anti-site disorder.
△ Less
Submitted 23 August, 2018; v1 submitted 30 March, 2018;
originally announced March 2018.
-
The design of the MEG II experiment
Authors:
A. M. Baldini,
E. Baracchini,
C. Bemporad,
F. Berg,
M. Biasotti,
G. Boca,
P. W. Cattaneo,
G. Cavoto,
F. Cei,
M. Chiappini,
G. Chiarello,
C. Chiri,
G. Cocciolo,
A. Corvaglia,
A. de Bari,
M. De Gerone,
A. D'Onofrio,
M. Francesconi,
Y. Fujii,
L. Galli,
F. Gatti,
F. Grancagnolo,
M. Grassi,
D. N. Grigoriev,
M. Hildebrandt
, et al. (55 additional authors not shown)
Abstract:
The MEG experiment, designed to search for the mu+->e+ gamma decay at a 10^-13 sensitivity level, completed data taking in 2013. In order to increase the sensitivity reach of the experiment by an order of magnitude to the level of 6 x 10-14 for the branching ratio, a total upgrade, involving substantial changes to the experiment, has been undertaken, known as MEG II. We present both the motivation…
▽ More
The MEG experiment, designed to search for the mu+->e+ gamma decay at a 10^-13 sensitivity level, completed data taking in 2013. In order to increase the sensitivity reach of the experiment by an order of magnitude to the level of 6 x 10-14 for the branching ratio, a total upgrade, involving substantial changes to the experiment, has been undertaken, known as MEG II. We present both the motivation for the upgrade and a detailed overview of the design of the experiment and of the expected detector performance.
△ Less
Submitted 15 January, 2018;
originally announced January 2018.
-
Implementation of the multiconfiguration time-dependent Hatree-Fock method for general molecules on a multi-resolution Cartesian grid
Authors:
Ryohto Sawada,
Takeshi Sato,
Kenichi L. Ishikawa
Abstract:
We report a three-dimensional numerical implementation of multiconfiguration time-dependent Hartree-Fock (MCTDHF) based on a multi-resolution Cartesian grid, with no need to assume any symmetry of molecular structure. We successfully compute high-harmonic generation (HHG) of H2 and H2O. The present implementation will open a way to the first-principle theoretical study of intense-field and attosec…
▽ More
We report a three-dimensional numerical implementation of multiconfiguration time-dependent Hartree-Fock (MCTDHF) based on a multi-resolution Cartesian grid, with no need to assume any symmetry of molecular structure. We successfully compute high-harmonic generation (HHG) of H2 and H2O. The present implementation will open a way to the first-principle theoretical study of intense-field and attosecond-pulse induced ultrafast phenomena in general molecules.
△ Less
Submitted 22 March, 2016; v1 submitted 6 January, 2016;
originally announced January 2016.
-
Muon polarization in the MEG experiment: predictions and measurements
Authors:
A. M. Baldini,
Y. Bao,
E. Baracchini,
C. Bemporad,
F. Berg,
M. Biasotti,
G. Boca,
P. W. Cattaneo,
G. Cavoto,
F. Cei,
G. Chiarello,
C. Chiri,
A. De Bari,
M. De Gerone,
A. DÓnofrio,
S. Dussoni,
Y. Fujii,
L. Galli,
F. Gatti,
F. Grancagnolo,
M. Grassi,
A. Graziosi,
D. N. Grigoriev,
T. Haruyama,
M. Hildebrandt
, et al. (45 additional authors not shown)
Abstract:
The MEG experiment makes use of one of the world's most intense low energy muon beams, in order to search for the lepton flavour violating process $μ^{+} \rightarrow {\rm e}^{+} γ$. We determined the residual beam polarization at the thin stop** target, by measuring the asymmetry of the angular distribution of Michel decay positrons as a function of energy. The initial muon beam polarization at…
▽ More
The MEG experiment makes use of one of the world's most intense low energy muon beams, in order to search for the lepton flavour violating process $μ^{+} \rightarrow {\rm e}^{+} γ$. We determined the residual beam polarization at the thin stop** target, by measuring the asymmetry of the angular distribution of Michel decay positrons as a function of energy. The initial muon beam polarization at the production is predicted to be $P_μ = -1$ by the Standard Model (SM) with massless neutrinos. We estimated our residual muon polarization to be $P_μ = -0.85 \pm 0.03 ~ {\rm (stat)} ~ { }^{+ 0.04}_{-0.05} ~ {\rm (syst)}$ at the stop** target, which is consistent with the SM predictions when the depolarizing effects occurring during the muon production, propagation and moderation in the target are taken into account. The knowledge of beam polarization is of fundamental importance in order to model the background of our ${\megsign}$ search induced by the muon radiative decay: $μ^{+} \rightarrow {\rm e}^{+} \barν_μ ν_{\rm e} γ$.
△ Less
Submitted 28 April, 2016; v1 submitted 15 October, 2015;
originally announced October 2015.
-
Measurement of the radiative decay of polarized muons in the MEG experiment
Authors:
MEG Collaboration,
A. M. Baldini,
Y. Bao,
E. Baracchini,
C. Bemporad,
F. Berg,
M. Biasotti,
G. Boca,
P. W. Cattaneo,
G. Cavoto,
F. Cei,
G. Chiarello,
C. Chiri,
A. de Bari,
M. De Gerone,
A. D'Onofrio,
S. Dussoni,
Y. Fujii,
L. Galli,
F. Gatti,
F. Grancagnolo,
M. Grassi,
A. Graziosi,
D. N. Grigoriev,
T. Haruyama
, et al. (46 additional authors not shown)
Abstract:
We studied the radiative muon decay $μ^+ \to e^+ν\barνγ$ by using for the first time an almost fully polarized muon source. We identified a large sample (~13000) of these decays in a total sample of 1.8x10^14 positive muon decays collected in the MEG experiment in the years 2009--2010 and measured the branching ratio B($μ^+ \to e^+ν\barνγ$) = (6.03+-0.14(stat.)+-0.53(sys.))x10^-8 for E_e > 45 MeV…
▽ More
We studied the radiative muon decay $μ^+ \to e^+ν\barνγ$ by using for the first time an almost fully polarized muon source. We identified a large sample (~13000) of these decays in a total sample of 1.8x10^14 positive muon decays collected in the MEG experiment in the years 2009--2010 and measured the branching ratio B($μ^+ \to e^+ν\barνγ$) = (6.03+-0.14(stat.)+-0.53(sys.))x10^-8 for E_e > 45 MeV and E_γ > 40 MeV, consistent with the Standard Model prediction. The precise measurement of this decay mode provides a basic tool for the timing calibration, a normalization channel, and a strong quality check of the complete MEG experiment in the search for $μ^+ \to e^+γ$ process.
△ Less
Submitted 7 March, 2016; v1 submitted 11 December, 2013;
originally announced December 2013.
-
Analysis of strong-field enhanced ionization of molecules using Bohmian trajectories
Authors:
Ryohto Sawada,
Takeshi Sato,
Kenichi L. Ishikawa
Abstract:
We theoretically investigate the mechanism of enhanced ionization in two-electron molecules by analyzing Bohmian trajectories for a one-dimensional H2 in an intense laser field. We identify both types of ionizing trajectories corresponding to the ejection from the up-field and down-field cores. The trajectories of the two electrons are correlated with each other in the former while correlation is…
▽ More
We theoretically investigate the mechanism of enhanced ionization in two-electron molecules by analyzing Bohmian trajectories for a one-dimensional H2 in an intense laser field. We identify both types of ionizing trajectories corresponding to the ejection from the up-field and down-field cores. The trajectories of the two electrons are correlated with each other in the former while correlation is negligible in the latter. The contributions from the two ionization types, though depending on laser intensity and internuclear distance, are comparable to each other.
△ Less
Submitted 21 August, 2014; v1 submitted 29 October, 2013;
originally announced October 2013.
-
The MEG detector for $μ+\to e+γ$ decay search
Authors:
J. Adam,
X. Bai,
A. M. Baldini,
E. Baracchini,
C. Bemporad,
G. Boca,
P. W. Cattaneo,
G. Cavoto,
F. Cei,
C. Cerri,
M. Corbo,
N. Curalli,
A. De Bari,
M. De Gerone,
L. Del Frate,
S. Doke,
S. Dussoni,
J. Egger,
K. Fratini,
Y. Fujii,
L. Galli,
S. Galeotti,
G. Gallucci,
F. Gatti,
B. Golden
, et al. (51 additional authors not shown)
Abstract:
The MEG (Mu to Electron Gamma) experiment has been running at the Paul Scherrer Institut (PSI), Switzerland since 2008 to search for the decay \meg\ by using one of the most intense continuous $μ^+$ beams in the world. This paper presents the MEG components: the positron spectrometer, including a thin target, a superconducting magnet, a set of drift chambers for measuring the muon decay vertex and…
▽ More
The MEG (Mu to Electron Gamma) experiment has been running at the Paul Scherrer Institut (PSI), Switzerland since 2008 to search for the decay \meg\ by using one of the most intense continuous $μ^+$ beams in the world. This paper presents the MEG components: the positron spectrometer, including a thin target, a superconducting magnet, a set of drift chambers for measuring the muon decay vertex and the positron momentum, a timing counter for measuring the positron time, and a liquid xenon detector for measuring the photon energy, position and time. The trigger system, the read-out electronics and the data acquisition system are also presented in detail. The paper is completed with a description of the equipment and techniques developed for the calibration in time and energy and the simulation of the whole apparatus.
△ Less
Submitted 10 April, 2013; v1 submitted 10 March, 2013;
originally announced March 2013.
-
New constraint on the existence of the mu+-> e+ gamma decay
Authors:
MEG Collaboration,
J. Adam,
X. Bai,
A. M. Baldini,
E. Baracchini,
C. Bemporad,
G. Boca,
P. W. Cattaneo,
G. Cavoto,
F. Cei,
C. Cerri,
A. de Bari,
M. De Gerone,
T. Doke,
S. Dussoni,
J. Egger,
K. Fratini,
Y. Fujii,
L. Galli,
G. Gallucci,
F. Gatti,
B. Golden,
M. Grassi,
A. Graziosi,
D. N. Grigoriev
, et al. (49 additional authors not shown)
Abstract:
The analysis of a combined data set, totaling 3.6 \times 10^14 stopped muons on target, in the search for the lepton flavour violating decay mu^+ -> e^+ gamma is presented. The data collected by the MEG experiment at the Paul Scherrer Institut show no excess of events compared to background expectations and yield a new upper limit on the branching ratio of this decay of 5.7 \times 10^-13 (90% conf…
▽ More
The analysis of a combined data set, totaling 3.6 \times 10^14 stopped muons on target, in the search for the lepton flavour violating decay mu^+ -> e^+ gamma is presented. The data collected by the MEG experiment at the Paul Scherrer Institut show no excess of events compared to background expectations and yield a new upper limit on the branching ratio of this decay of 5.7 \times 10^-13 (90% confidence level). This represents a four times more stringent limit than the previous world best limit set by MEG.
△ Less
Submitted 23 April, 2013; v1 submitted 4 March, 2013;
originally announced March 2013.
-
MEG Upgrade Proposal
Authors:
A. M. Baldini,
F. Cei,
C. Cerri,
S. Dussoni,
L. Galli,
M. Grassi,
D. Nicolò,
F. Raffaelli,
F. Sergiampietri,
G. Signorelli,
F. Tenchini,
D. Bagliani,
M. De Gerone,
F. Gatti,
E. Baracchini,
Y. Fujii,
T. Iwamoto,
D. Kaneko,
T. Mori,
M. Nishimura,
W. Ootani,
R. Sawada,
Y. Uchiyama,
G. Boca,
P. W. Cattaneo
, et al. (43 additional authors not shown)
Abstract:
We propose the continuation of the MEG experiment to search for the charged lepton flavour violating decay (cLFV) μ\to e γ, based on an upgrade of the experiment, which aims for a sensitivity enhancement of one order of magnitude compared to the final MEG result, down to the $6 \times 10^{-14}$ level. The key features of this new MEG upgrade are an increased rate capability of all detectors to ena…
▽ More
We propose the continuation of the MEG experiment to search for the charged lepton flavour violating decay (cLFV) μ\to e γ, based on an upgrade of the experiment, which aims for a sensitivity enhancement of one order of magnitude compared to the final MEG result, down to the $6 \times 10^{-14}$ level. The key features of this new MEG upgrade are an increased rate capability of all detectors to enable running at the intensity frontier and improved energy, angular and timing resolutions, for both the positron and photon arms of the detector. On the positron-side a new low-mass, single volume, high granularity tracker is envisaged, in combination with a new highly segmented, fast timing counter array, to track positron from a thinner stop** target. The photon-arm, with the largest liquid xenon (LXe) detector in the world, totalling 900 l, will also be improved by increasing the granularity at the incident face, by replacing the current photomultiplier tubes (PMTs) with a larger number of smaller photosensors and optimizing the photosensor layout also on the lateral faces. A new DAQ scheme involving the implementation of a new combined readout board capable of integrating the diverse functions of digitization, trigger capability and splitter functionality into one condensed unit, is also under development. We describe here the status of the MEG experiment, the scientific merits of the upgrade and the experimental methods we plan to use.
△ Less
Submitted 4 February, 2013; v1 submitted 30 January, 2013;
originally announced January 2013.
-
New limit on the lepton-flavour violating decay mu -> e gamma
Authors:
MEG collaboration,
J. Adam,
X. Bai,
A. M. Baldini,
E. Baracchini,
C. Bemporad,
G. Boca,
P. W. Cattaneo,
G. Cavoto,
F. Cei,
C. Cerri,
A. de Bari,
M. De Gerone,
T. Doke,
S. Dussoni,
J. Egger,
K. Fratini,
Y. Fujii,
L. Galli,
G. Gallucci,
F. Gatti,
B. Golden,
M. Grassi,
D. N. Grigoriev,
T. Haruyama
, et al. (42 additional authors not shown)
Abstract:
We present a new result based on an analysis of the data collected by the MEG detector at the Paul Scherrer Institut in 2009 and 2010, in search of the lepton flavour violating decay mu->e gamma. The likelihood analysis of the combined data sample, which corresponds to a total of 1.8 x 10**14 muon decays, gives a 90% C.L. upper limit of 2.4 x 10**-12 on the branching ratio of the mu->e gamma decay…
▽ More
We present a new result based on an analysis of the data collected by the MEG detector at the Paul Scherrer Institut in 2009 and 2010, in search of the lepton flavour violating decay mu->e gamma. The likelihood analysis of the combined data sample, which corresponds to a total of 1.8 x 10**14 muon decays, gives a 90% C.L. upper limit of 2.4 x 10**-12 on the branching ratio of the mu->e gamma decay, constituting the most stringent limit on the existence of this decay to date.
△ Less
Submitted 2 September, 2011; v1 submitted 27 July, 2011;
originally announced July 2011.
-
The Architecture of MEG Simulation and Analysis Software
Authors:
Paolo W. Cattaneo,
Fabrizio Cei,
Ryu Sawada,
Matthias Schneebeli,
Shuei Yamada
Abstract:
MEG (Mu to Electron Gamma) is an experiment dedicated to search for the $μ^+ \rightarrow e^+γ$ decay that is strongly suppressed in the Standard Model but predicted in several Super Symmetric extensions of it at an accessible rate. MEG is a small-size experiment ($\approx 50-60$ physicists at any time) with a life span of about 10 years. The limited human resource available, in particular in the c…
▽ More
MEG (Mu to Electron Gamma) is an experiment dedicated to search for the $μ^+ \rightarrow e^+γ$ decay that is strongly suppressed in the Standard Model but predicted in several Super Symmetric extensions of it at an accessible rate. MEG is a small-size experiment ($\approx 50-60$ physicists at any time) with a life span of about 10 years. The limited human resource available, in particular in the core offline group, emphasized the importance of reusing software and exploiting existing expertise. Great care has been devoted to provide a simple system that hides implementation details to the average programmer. That allowed many members of the collaboration to contribute to the development of the software of the experiment with limited programming skill. The offline software is based on two frameworks: {\bf REM} in FORTRAN 77 used for the event generation and detector simulation package {\bf GEM}, based on GEANT 3, and {\bf ROME} in C++ used in the readout simulation {\bf Bartender} and in the reconstruction and analysis program {\bf Analyzer}. Event display in the simulation is based on GEANT 3 graphic libraries and in the reconstruction on ROOT graphic libraries. Data are stored in different formats in various stage of the processing. The frameworks include utilities for input/output, database handling and format conversion transparent to the user.
△ Less
Submitted 20 June, 2011; v1 submitted 1 February, 2011;
originally announced February 2011.
-
A limit for the mu -> e gamma decay from the MEG experiment
Authors:
MEG collaboration,
J. Adam,
X. Bai,
A. Baldini,
E. Baracchini,
A. Barchiesi,
C. Bemporad,
G. Boca,
P. W. Cattaneo,
G. Cavoto,
G. Cecchet,
F. Cei,
C. Cerri,
A. De Bari,
M. De Gerone,
T. Doke,
S. Dussoni,
J. Egger,
L. Galli,
G. Gallucci,
F. Gatti,
B. Golden,
M. Grassi,
D. N. Grigoriev,
T. Haruyama
, et al. (45 additional authors not shown)
Abstract:
A search for the decay mu -> e gamma, performed at PSI and based on data from the initial three months of operation of the MEG experiment, yields an upper limit on the branching ratio of BR(mu -> e gamma) < 2.8 x 10**-11 (90% C.L.). This corresponds to the measurement of positrons and photons from ~ 10**14 stopped mu-decays by means of a superconducting positron spectrometer and a 900 litre liqu…
▽ More
A search for the decay mu -> e gamma, performed at PSI and based on data from the initial three months of operation of the MEG experiment, yields an upper limit on the branching ratio of BR(mu -> e gamma) < 2.8 x 10**-11 (90% C.L.). This corresponds to the measurement of positrons and photons from ~ 10**14 stopped mu-decays by means of a superconducting positron spectrometer and a 900 litre liquid xenon photon detector.
△ Less
Submitted 4 March, 2010; v1 submitted 18 August, 2009;
originally announced August 2009.
-
Absorption of Scintillation Light in a 100 $\ell$ Liquid Xenon$γ$ Ray Detector and Expected Detector Performance
Authors:
A. Baldini,
C. Bemporad,
F. Cei,
T. Doke,
M. Grassi,
A. A. Grebenuk,
D. N. Grigoriev,
T. Haruyama,
K. Kasami,
J. Kikuchi,
A. Maki,
T. Mashimo,
S. Mihara,
T. Mitsuhashi,
T. Mori,
D. Nicolo`,
H. Nishiguchi,
W. Ootani,
K. Ozone,
A. Papa,
R. Pazzi,
S. Ritt,
R. Sawada,
F. Sergiampietri,
G. Signorelli
, et al. (6 additional authors not shown)
Abstract:
An 800L liquid xenon scintillation $γ$ ray detector is being developed for the MEG experiment which will search for $μ^+\to\mathrm{e}^+γ$ decay at the Paul Scherrer Institut. Absorption of scintillation light of xenon by impurities might possibly limit the performance of such a detector. We used a 100L prototype with an active volume of 372x372x496 mm$^3$ to study the scintillation light absorpt…
▽ More
An 800L liquid xenon scintillation $γ$ ray detector is being developed for the MEG experiment which will search for $μ^+\to\mathrm{e}^+γ$ decay at the Paul Scherrer Institut. Absorption of scintillation light of xenon by impurities might possibly limit the performance of such a detector. We used a 100L prototype with an active volume of 372x372x496 mm$^3$ to study the scintillation light absorption. We have developed a method to evaluate the light absorption, separately from elastic scattering of light, by measuring cosmic rays and $α$ sources. By using a suitable purification technique, an absorption length longer than 100 cm has been achieved. The effects of the light absorption on the energy resolution are estimated by Monte Carlo simulation.
△ Less
Submitted 6 July, 2004;
originally announced July 2004.
-
Liquid Xe scintillation calorimetry and Xe optical properties
Authors:
A. Baldini,
C. Bemporad,
F. Cei,
T. Doke,
M. Grassi,
T. Haruyama,
S. Mihara,
T. Mori,
D. Nicolò,
H. Nishiguchi,
W. Ootani,
K. Ozone,
A. Papa,
R. Pazzi,
R. Sawada,
F. Sergiampietri,
G. Signorelli,
S. Suzuki,
K. Terasawa
Abstract:
The optical properties of LXe in the vacuum ultra violet (VUV), determining the performance of a scintillation calorimeter, are discussed in detail. The available data, measured in a wider spectral region from visible to UV light, and in a large range of Xe densities, from gas to liquid, are examined. It is shown that this information can be used for deriving the LXe optical properties in the VU…
▽ More
The optical properties of LXe in the vacuum ultra violet (VUV), determining the performance of a scintillation calorimeter, are discussed in detail. The available data, measured in a wider spectral region from visible to UV light, and in a large range of Xe densities, from gas to liquid, are examined. It is shown that this information can be used for deriving the LXe optical properties in the VUV. A comparison is made with the few direct measurements in LXe for VUV light resulting from the LXe excitation by ionizing particles. A useful relation is obtained which connects the Rayleigh scattering length to the refractive index in LXe.
△ Less
Submitted 15 January, 2004;
originally announced January 2004.