-
Settling of two rigidly connected spheres
Authors:
Zachary Maches,
Morgane Houssais,
Alban Sauret,
Eckart Meiburg
Abstract:
Laboratory experiments and particle-resolved simulations are employed to investigate the settling dynamics of a pair of rigidly connected spherical particles of unequal size. They yield a detailed picture of the transient evolution and the terminal values of the aggregate's orientation angle and its settling and drift velocities as functions of the aspect ratio and the Galileo number $Ga$, which d…
▽ More
Laboratory experiments and particle-resolved simulations are employed to investigate the settling dynamics of a pair of rigidly connected spherical particles of unequal size. They yield a detailed picture of the transient evolution and the terminal values of the aggregate's orientation angle and its settling and drift velocities as functions of the aspect ratio and the Galileo number $Ga$, which denotes the ratio of buoyancy and viscous forces acting on the aggregate. At low to moderate values of $Ga$, the aggregate's orientation and velocity converge to their terminal values monotonically, whereas for higher $Ga$-values the aggregate tends to undergo a more complex motion. If the aggregate assumes an asymmetric terminal orientation, it displays a nonzero terminal drift velocity. For diameter ratios much larger than one and small $Ga$, the terminal orientation of the aggregate becomes approximately vertical, whereas when $Ga$ is sufficiently large for flow separation to occur, the aggregate orients itself such that the smaller sphere is located at the separation line. Empirical scaling laws are obtained for the terminal settling velocity and orientation angle as functions of the aspect ratio and $Ga$ for diameter ratios from 1 to 4 and particle-to-fluid density ratios from 1.3 to 5. An analysis of the accompanying flow field shows the formation of vortical structures exhibiting complex topologies in the aggregate's wake, and it indicates the formation of a horizontal pressure gradient across the larger sphere, which represents the main reason for the emergence of the drift velocity.
△ Less
Submitted 14 June, 2024;
originally announced June 2024.
-
Role of the constriction angle on the clogging by bridging of suspensions of particles
Authors:
Nathan Vani,
Sacha Escudier,
Deok-Hoon Jeong,
Alban Sauret
Abstract:
Confined flows of particles can lead to clogging, and therefore failure, of various fluidic systems across many applications. As a result, design guidelines need to be developed to ensure that clogging is prevented or at least delayed. In this Letter, we investigate the influence of the angle of reduction in the cross-section of the channel on the bridging of semi-dilute and dense non-Brownian sus…
▽ More
Confined flows of particles can lead to clogging, and therefore failure, of various fluidic systems across many applications. As a result, design guidelines need to be developed to ensure that clogging is prevented or at least delayed. In this Letter, we investigate the influence of the angle of reduction in the cross-section of the channel on the bridging of semi-dilute and dense non-Brownian suspensions of spherical particles. We observe a decrease of the clogging probability with the reduction of the constriction angle. This effect is more pronounced for dense suspensions close to the maximum packing fraction where particles are in contact in contrast to semi-dilute suspensions. We rationalize this difference in terms of arch selection. We describe the role of the constriction angle and the flow profile, providing insights into the distinct behavior of semi-dilute and dense suspensions.
△ Less
Submitted 3 May, 2024;
originally announced May 2024.
-
Universal equation describes the shape of air bubbles trapped in ice
Authors:
Virgile Thiévenaz,
Jochem G. Meijer,
Detlef Lohse,
Alban Sauret
Abstract:
Water usually contains dissolved gases, and because freezing is a purifying process these gases must be expelled for ice to form. Bubbles appear at the freezing front and are trapped in ice, making pores. These pores come in a range of sizes from microns to millimeters and their shapes are peculiar; never spherical but elongated, and usually fore-aft asymmetric. We show that these remarkable shape…
▽ More
Water usually contains dissolved gases, and because freezing is a purifying process these gases must be expelled for ice to form. Bubbles appear at the freezing front and are trapped in ice, making pores. These pores come in a range of sizes from microns to millimeters and their shapes are peculiar; never spherical but elongated, and usually fore-aft asymmetric. We show that these remarkable shapes result of a delicate balance between freezing, capillarity, and mass diffusion. A non-linear ordinary differential equation suffices to describe the bubbles, with only two non-dimensional parameters representing the supersaturation and the freezing rate. Our experiments provide us with a large variety of pictures of bubble shapes. We show that all of them have their rounded tip well described by an asymptotic regime of the differential equation, and that most of them can have their full shape quantitatively matched by a full solution. This enables the measurement of the freezing conditions of ice samples, and the design of freeze-cast porous materials. Furthermore, the equation exhibits a bifurcation that explains why some bubbles grow indefinitely and make long cylindrical ``ice worms'', well known to glaciologists.
△ Less
Submitted 12 June, 2024; v1 submitted 20 February, 2024;
originally announced February 2024.
-
The effects of interparticle cohesion on the collapse of granular columns
Authors:
Ram Sudhir Sharma,
Wladimir Sarlin,
Langqi Xing,
Cyprien Morize,
Philippe Gondret,
Alban Sauret
Abstract:
The presence of interparticle cohesion can drastically change the behavior of granular materials. For instance, powders are challenging to handle, and one can make a sandcastle using wet grains. In this study, we report experimental results for columns of model cohesive grains collapsing under their own weight in air and spreading on a rough horizontal surface. The effects of two different sources…
▽ More
The presence of interparticle cohesion can drastically change the behavior of granular materials. For instance, powders are challenging to handle, and one can make a sandcastle using wet grains. In this study, we report experimental results for columns of model cohesive grains collapsing under their own weight in air and spreading on a rough horizontal surface. The effects of two different sources of interparticle cohesion on two collapse geometries are compared and rationalized in a common framework. Grains are made cohesive by adding a small amount of water, such that they are in the pendular state, or by applying a polymer coating. The effects of cohesion are reported for a cylindrical column that spreads unconfined axisymmetrically and a confined rectangular column that flows in a single direction. A dimensionless number, comparing macroscopic cohesive strength to particle weight, is shown to capture the effects of cohesion on the final morphology. To this end, a characterization of the cohesive strength of the granular materials is obtained, independent of the physical source of cohesion at the particle scale. Such a framework allows for a common description of cohesive granular materials with different sources of cohesion.
△ Less
Submitted 11 February, 2024;
originally announced February 2024.
-
Caging and fluid deformations in dense bidisperse suspensions
Authors:
Virgile Thiévenaz,
Nathan Vani,
Alban Sauret
Abstract:
We investigate the link between the geometric environment of particles, the local deformations of the solvent, and the bulk effective viscosity in non-Brownian suspensions. First, we discuss the caging of particles by their neighbors,and especially the caging of small particles by large ones in bidisperse suspensions.We develop a model that attributes an effective volume to particles depending on…
▽ More
We investigate the link between the geometric environment of particles, the local deformations of the solvent, and the bulk effective viscosity in non-Brownian suspensions. First, we discuss the caging of particles by their neighbors,and especially the caging of small particles by large ones in bidisperse suspensions.We develop a model that attributes an effective volume to particles depending on their environment, and yields the local deformations and effective viscosity. We compare this model to data from the literature, as well as to our own experiments with suspensions of non-Brownian polystyrene beads. Using dissolved polymers and their coil-stretch transition as strain probes, we measure the local deformation of the liquid and the effect of caging thereon. We obtain a linear relationship between the amplified local strain rate and the particle volume fraction, in which the critical volume fraction $φ_\mathrm{c}$ appears as an effective volume of the particles; this relationship is found valid up into the dense regime.
△ Less
Submitted 15 November, 2023;
originally announced November 2023.
-
Vortex rings generated by a translating disk from start to stop
Authors:
Joanne Steiner,
Cyprien Morize,
Ivan Delbende,
Alban Sauret,
Philippe Gondret
Abstract:
In this article, we investigate experimentally and numerically the time evolution of vortex rings generated by the translation of a rigid disk in a fluid initially at rest and submitted to an acceleration followed by a deceleration. The size of the disk and its motion in terms of stroke length and travel time are varied as control parameters. The start-up vortex ring created in the near wake of th…
▽ More
In this article, we investigate experimentally and numerically the time evolution of vortex rings generated by the translation of a rigid disk in a fluid initially at rest and submitted to an acceleration followed by a deceleration. The size of the disk and its motion in terms of stroke length and travel time are varied as control parameters. The start-up vortex ring created in the near wake of the disk is characterized experimentally by PIV, and the measurements agree quantitatively with axisymmetric numerical simulations performed with the Basilisk flow solver. The maximum radius and circulation of the annular vortex and its dynamics are shown to follow different power laws with the control parameters. The modeling adapted from Wedemeyer's two-dimensional theoretical calculations [E. Wedemeyer, Ausbildung eines Wirbelpaares an den Kanten einer Platte, Ingenieur-Archiv 30, (1961)] captures the observed scaling laws. Besides, after the disk stops, a secondary ``stop**" vortex ring is generated, which is shown to affect the motion of the main vortex ring.
△ Less
Submitted 6 June, 2023;
originally announced June 2023.
-
Deposition and alignment of fiber suspensions by dip coating
Authors:
Deok-Hoon Jeong,
Langqi Xing,
Michael Ka Ho Lee,
Nathan Vani,
Alban Sauret
Abstract:
The dip coating of suspensions made of monodisperse non-Brownian spherical particles dispersed in a Newtonian fluid leads to different coating regimes depending on the ratio of the particle diameter to the thickness of the film entrained on the substrate. In particular, dilute particles dispersed in the liquid are entrained only above a threshold value of film thickness. In the case of anisotropic…
▽ More
The dip coating of suspensions made of monodisperse non-Brownian spherical particles dispersed in a Newtonian fluid leads to different coating regimes depending on the ratio of the particle diameter to the thickness of the film entrained on the substrate. In particular, dilute particles dispersed in the liquid are entrained only above a threshold value of film thickness. In the case of anisotropic particles, in particular fibers, the smallest characteristic dimension will control the entrainment of the particle. Furthermore, it is possible to control the orientation of the anisotropic particles depending on the substrate geometry. To test the hypotheses, we performed dip-coating experiments with dilute suspensions of non-Brownian fibers with different length-to-diameter aspect ratios. We characterize the number of fibers entrained on the surface of the substrate as a function of the withdrawal velocity, allowing us to estimate a threshold capillary number below which all the particles remain in the liquid bath. Besides, we measure the angular distribution of the entrained fibers for two different substrate geometries: flat plates and cylindrical rods. We then measure the film thickness for more concentrated fiber suspensions. The entrainment of the fibers on a flat plate and a cylindrical rod is primarily controlled by the smaller characteristic length of the fibers: their diameter. At first order, the entrainment threshold scales similarly to that of spherical particles. The length of the fibers only appears to have a minor influence on the entrainment threshold. No preferential alignment is observed for non-Brownian fibers on a flat plate, except for very thin films, whereas the fibers tend to align themselves along the axis of a cylindrical rod for a large enough ratio of the fiber length to the radius of the cylindrical rod.
△ Less
Submitted 1 May, 2023;
originally announced May 2023.
-
Particulate suspension coating of capillary tubes
Authors:
Deok-Hoon Jeong,
Langqi Xing,
Jean-Baptiste Boutin,
Alban Sauret
Abstract:
The displacement of a suspension of particles by an immiscible fluid in a capillary tube or in a porous media is a canonical configuration that finds application in a large number of natural and industrial applications, including water purification, dispersion of colloids and microplastics, coating and functionalization of tubings. The influence of particles dispersed in the fluid on the interfaci…
▽ More
The displacement of a suspension of particles by an immiscible fluid in a capillary tube or in a porous media is a canonical configuration that finds application in a large number of natural and industrial applications, including water purification, dispersion of colloids and microplastics, coating and functionalization of tubings. The influence of particles dispersed in the fluid on the interfacial dynamics and on the properties of the liquid film left behind remain poorly understood. Here, we study the deposition of a coating film on the walls of a capillary tube induced by the translation of a suspension plug pushed by air. We identify the different deposition regimes as a function of the translation speed of the plug, the particle size, and the volume fraction of the suspension. The thickness of the coating film is characterized, and we show that similarly to dip coating, three coating regimes, liquid only, heterogeneous, and thick films, are observed. We also show that, at first order, the thickness of films thicker than the particle diameter can be predicted using the effective viscosity of the suspension. Nevertheless, we also report that for large particles and concentrated suspensions, a shear-induced migration mechanism leads to local variations in volume fraction and modifies the deposited film thickness and composition.
△ Less
Submitted 29 September, 2022;
originally announced September 2022.
-
A Sharp Numerical Method for the Simulation of Stefan Problems with Convective Effects
Authors:
Elyce Bayat,
Raphael Egan,
Daniil Bochkov,
Alban Sauret,
Frederic Gibou
Abstract:
We present a numerical method for the solution of interfacial growth governed by the Stefan model coupled with incompressible fluid flow. An algorithm is presented which takes special care to enforce sharp interfacial conditions on the temperature, the flow velocity and pressure, and the interfacial velocity. The approach utilizes level-set methods for sharp and implicit interface tracking, hybrid…
▽ More
We present a numerical method for the solution of interfacial growth governed by the Stefan model coupled with incompressible fluid flow. An algorithm is presented which takes special care to enforce sharp interfacial conditions on the temperature, the flow velocity and pressure, and the interfacial velocity. The approach utilizes level-set methods for sharp and implicit interface tracking, hybrid finite-difference/finite-volume discretizations on adaptive quadtree grids, and a pressure-free projection method for the solution of the incompressible Navier-Stokes equations. The method is first verified with numerical convergence tests using a synthetic solution. Then, computational studies of ice formation on a cylinder in crossflow are performed and provide good quantitative agreement with existing experimental results, reproducing qualitative phenomena that have been observed in past experiments. Finally, we investigate the role of varying Reynolds and Stefan numbers on the emerging interface morphologies and provide new insights around the time evolution of local and average heat transfer at the interface.
△ Less
Submitted 28 September, 2022;
originally announced September 2022.
-
Pinch-off of bubbles in a polymer solution
Authors:
Sreeram Rajesh,
Sumukh S Peddada,
Virgile Thiévenaz,
Alban Sauret
Abstract:
The formation of gas bubbles in a liquid occurs in various engineering processes, such as during foam generation or agitation and mixing in bubbly flows. A challenge in describing the initial formation of a gas bubble is due to the singular behavior at pinch-off. Past experiments in Newtonian fluids have shown that the minimum neck radius follows a power-law evolution shortly before the break-up.…
▽ More
The formation of gas bubbles in a liquid occurs in various engineering processes, such as during foam generation or agitation and mixing in bubbly flows. A challenge in describing the initial formation of a gas bubble is due to the singular behavior at pinch-off. Past experiments in Newtonian fluids have shown that the minimum neck radius follows a power-law evolution shortly before the break-up. The exponent of the power-law depends on the viscosity of the surrounding Newtonian liquid, and ranges from 0.5 for low viscosity to 1 for large viscosity. However, bubble formation in a viscoelastic polymer solution remains unclear, and in particular, if the evolution is still captured by a power-law and how the exponent varies with the polymer concentration. In this study, we use high-speed imaging to analyze the bubble pinch-off in solutions of polymers. We characterize the time evolution of the neck radius when varying the concentration and thus the characteristic relaxation time and describe the influence of viscoelasticity on the bubble pinch-off. Our results reveal that the presence of polymers does not influence the thinning until the latter stages, when their presence in sufficient concentration delays the pinch-off.
△ Less
Submitted 13 September, 2022; v1 submitted 13 September, 2022;
originally announced September 2022.
-
From granular collapses to shallow water waves: A predictive model for tsunami generation
Authors:
Wladimir Sarlin,
Cyprien Morize,
Alban Sauret,
Philippe Gondret
Abstract:
In this article, we present a predictive model for the amplitude of impulse waves generated by the collapse of a granular column into a water layer. The model, which combines the spreading dynamics of the grains and the wave hydrodynamics in shallow water, is successfully compared to a large dataset of laboratory experiments, and captures the influence of the initial parameters while giving an acc…
▽ More
In this article, we present a predictive model for the amplitude of impulse waves generated by the collapse of a granular column into a water layer. The model, which combines the spreading dynamics of the grains and the wave hydrodynamics in shallow water, is successfully compared to a large dataset of laboratory experiments, and captures the influence of the initial parameters while giving an accurate prediction. Furthermore, the role played on the wave generation by two key dimensionless numbers, i.e., the global Froude number and the relative volume of the immersed deposit, is rationalized. These results provide a simplified, yet comprehensive, physical description of the generation of tsunami waves engendered by large-scale subaerial landslides, rockfalls, or cliff collapses in a shallow water.
△ Less
Submitted 7 September, 2022;
originally announced September 2022.
-
Influence of the solid fraction on the clogging by bridging of suspensions in constricted channels
Authors:
Nathan Vani,
Sacha Escudier,
Alban Sauret
Abstract:
Clogging can occur whenever a suspension of particles flows through a confined system. The formation of clogs is often correlated to a reduction in the cross-section of the channel. In this study, we consider the clogging by bridging, i.e., through the formation of a stable arch of particles at a constriction that hinders the transport of particles downstream of the clog. To characterize the role…
▽ More
Clogging can occur whenever a suspension of particles flows through a confined system. The formation of clogs is often correlated to a reduction in the cross-section of the channel. In this study, we consider the clogging by bridging, i.e., through the formation of a stable arch of particles at a constriction that hinders the transport of particles downstream of the clog. To characterize the role of the volume fraction of the suspension on the clogging dynamics, we study the flow of particulate suspensions through 3D-printed millifluidic devices. We systematically characterize the bridging of non-Brownian particles in a quasi-bidimensional system in which we directly visualize and track the particles as they flow and form arches at a constriction. We report the conditions for clogging by bridging when varying the constriction width to particle diameter ratio for different concentrations of the particles in suspension. We then discuss our results using a stochastic model to rationalize the influence of solid fraction on the probability of clogging. Understanding the mechanisms and conditions of clog formation is an important step for optimizing engineering design and develo** more reliable dispensing systems.
△ Less
Submitted 24 August, 2022;
originally announced August 2022.
-
Erosion of cohesive grains by an im**ing turbulent jet
Authors:
Ram Sudhir Sharma,
Mingze Gong,
Sivar Azadi,
Adrien Gans,
Philippe Gondret,
Alban Sauret
Abstract:
The erosion and transport of particles by an im**ing turbulent jet in air is observed in various situations, such as the cleaning of a surface or during the landing of a spacecraft. The presence of inter-particle cohesive forces modifies the erosion threshold, beyond which grains are transported. The cohesion also influences the resulting formation and shape of the crater. In this paper, we char…
▽ More
The erosion and transport of particles by an im**ing turbulent jet in air is observed in various situations, such as the cleaning of a surface or during the landing of a spacecraft. The presence of inter-particle cohesive forces modifies the erosion threshold, beyond which grains are transported. The cohesion also influences the resulting formation and shape of the crater. In this paper, we characterize the role of the cohesive forces on the erosion of a flat granular bed by an im**ing normal turbulent jet in air. We perform experiments using a cohesion-controlled granular material to finely tune the cohesion between particles while kee** the other properties constant. We investigate the effects of the cohesion on the erosion threshold and show that the results can be rationalized by a cohesive Shields number that accounts for the inter-particles cohesion force. Despite the complex nature of a turbulent jet, we can provide a scaling law to correlate the jet erosion threshold, based on the outlet velocity at the nozzle, to a local cohesive Shields number. The presence of cohesion between the grains also modifies the shape of the resulting crater, the transport of grains, and the local erosion process.
△ Less
Submitted 3 June, 2022;
originally announced June 2022.
-
Transition to the viscoelastic regime in the thinning of polymer solutions
Authors:
Sreeram Rajesh,
Virgile Thiévenaz,
Alban Sauret
Abstract:
In this study, we investigate the transition between the Newtonian and the viscoelastic regimes during the pinch-off of droplets of dilute polymer solutions and discuss its link to the coil-stretch transition. The detachment of a drop from a nozzle is associated with the formation of a liquid neck that causes the divergence of the local stress in a vanishingly small region. If the liquid is a poly…
▽ More
In this study, we investigate the transition between the Newtonian and the viscoelastic regimes during the pinch-off of droplets of dilute polymer solutions and discuss its link to the coil-stretch transition. The detachment of a drop from a nozzle is associated with the formation of a liquid neck that causes the divergence of the local stress in a vanishingly small region. If the liquid is a polymer solution, this increasing stress progressively unwinds the polymer chains, up to a point where the resulting increase in the viscosity slows down drastically the thinning. This threshold to a viscoelastic behavior corresponds to a macroscopic strain rate $\dot{\varepsilon}_{\rm c}$. In the present study, we characterize the variations of $\dot{\varepsilon}_{\rm c}$ with respect to the polymer concentration and molar weight, to the solvent viscosity, and to the nozzle size, i.e., the weight of the drop. We provide empirical scaling laws for these variations. We also analyze the thinning dynamics at the transition and show that it follows a self-similar dynamics controlled by the time scale ${\dot{\varepsilon}_{\rm c}}^{-1}$. This characteristic time is different and always shorter than the relaxation time of the polymer.
△ Less
Submitted 12 March, 2022;
originally announced March 2022.
-
Clog mitigation in a microfluidic array via pulsatile flows
Authors:
Brian Dincau,
Connor Tang,
Emilie Dressaire,
Alban Sauret
Abstract:
Clogging is a common obstacle encountered during the transport of suspensions and represents a significant energy and material cost across applications, including water purification, irrigation, biopharmaceutical processing, and aquifer recharge. Pulsatile pressure-driven flows can help mitigate clogging when compared to steady flows. Here, we study experimentally the influence of the amplitude of…
▽ More
Clogging is a common obstacle encountered during the transport of suspensions and represents a significant energy and material cost across applications, including water purification, irrigation, biopharmaceutical processing, and aquifer recharge. Pulsatile pressure-driven flows can help mitigate clogging when compared to steady flows. Here, we study experimentally the influence of the amplitude of pulsation $0.25\,P_0 \leq δP \leq 1.25\,P_0$, where $P_0$ is the mean pressure, and of the frequency of pulsation $10^{-3}\,{\rm Hz} \leq f \leq 10^{-1}\,{\rm Hz}$ on clog mitigation in a microfluidic array of parallel channels using a dilute suspension of colloidal particles. The array geometry is representative of a classical filter, with parallel pores that clog over time, yielding a filter cake that continues to grow and can interact with other pores. We combine flow rate measurements with direct visualizations at the pore scale to correlate the observed clogging dynamics with the changes in flow rate. We observe that all pulsatile amplitudes at $0.1$ Hz yield increased throughput compared to steady flows. The rearrangement of particles when subject to a dynamic shear environment can delay the clogging of a pore or even remove an existing clog. However, this benefit is drastically reduced at $10^{-2}$ Hz and disappears at $10^{-3}$ Hz as the pulsatile timescale becomes too large compared to the timescale associated with the clogging and the growth of the filter cakes in this system. The present study demonstrates that pulsatile flows are a promising method to delay clogging at both the pore and system scale.
△ Less
Submitted 14 January, 2022;
originally announced January 2022.
-
Collapse dynamics of dry granular columns: from free-fall to quasi-static flow
Authors:
Wladimir Sarlin,
Cyprien Morize,
Alban Sauret,
Philippe Gondret
Abstract:
Gravity-driven collapses involving large amounts of dense granular material, such as landslides, avalanches, or rockfalls, in a geophysical context, represent significant natural hazards. Understanding their complex dynamics is hence a key concern for risk assessment. In the present work, we report experiments on the collapse of quasi-two-dimensional dry granular columns under the effect of gravit…
▽ More
Gravity-driven collapses involving large amounts of dense granular material, such as landslides, avalanches, or rockfalls, in a geophysical context, represent significant natural hazards. Understanding their complex dynamics is hence a key concern for risk assessment. In the present work, we report experiments on the collapse of quasi-two-dimensional dry granular columns under the effect of gravity, where both the velocity at which the grains are released and the aspect ratio of the column are varied to investigate the dynamics of the falling grains. At high release velocity, classical power laws for the final deposit are recovered, meaning those are representative of a free-fall like regime. For high enough aspect ratios, the top of the column undergoes an overall free-fall like motion. In addition, for all experiments, the falling grains also spread horizontally in a free-fall like motion, and the characteristic time of spreading is related to the horizontal extension reached by the deposit at all altitudes. At low release velocity, a quasi-static state is observed, with scaling laws for the final geometry identical to those of the viscous regime of granular-fluid flow. The velocity at which the grains are released governs the collapse dynamics. Between these two asymptotic regimes, the higher the release velocity, the smaller the impact on the collapse dynamics. The criterion $\overline{V} \geq 0.4\sqrt{gH_0}$, where $H_0$ is the initial height of the column, is found for the mean release velocity $\overline{V}$ not to influence the granular collapse.
△ Less
Submitted 15 December, 2021;
originally announced December 2021.
-
Dip-coating of bidisperse particulate suspensions
Authors:
Deok-Hoon Jeong,
Michael Ka Ho Lee,
Virgile Thiévenaz,
Martin Z. Bazant,
A. Sauret
Abstract:
Dip-coating consists in withdrawing a substrate from a bath to coat it with a thin liquid layer. This process is well-understood for homogeneous fluids, but heterogeneities such as particles dispersed in the liquid lead to more complex situations. Indeed, particles introduce a new length scale, their size, in addition to the thickness of the coating film. Recent studies have shown that at first or…
▽ More
Dip-coating consists in withdrawing a substrate from a bath to coat it with a thin liquid layer. This process is well-understood for homogeneous fluids, but heterogeneities such as particles dispersed in the liquid lead to more complex situations. Indeed, particles introduce a new length scale, their size, in addition to the thickness of the coating film. Recent studies have shown that at first order, the thickness of the coating film for monodisperse particles can be captured by an effective capillary number based on the viscosity of the suspension, providing that the film is thicker than the particle diameter. However, suspensions involved in most practical applications are polydisperse, characterized by a wide range of particle sizes, introducing additional length scales. In this study, we investigate the dip coating of suspensions having a bimodal size distribution of particles. We show that the effective viscosity approach is still valid in the regime where the coating film is thicker than the diameter of the largest particles, although bidisperse suspensions are less viscous than monodisperse suspensions of the same solid fraction. We also characterize the intermediate regime that consists of a heterogeneous coating layer and where the composition of the film is different from the composition of the bath. A model to predict the probability of entraining the particles in the liquid film depending on their sizes is proposed and captures our measurements. In this regime, corresponding to a specific range of withdrawal velocities, capillarity filters the large particles out of the film.
△ Less
Submitted 30 September, 2021;
originally announced October 2021.
-
Non-linear regimes of tsunami waves generated by a granular collapse
Authors:
Wladimir Sarlin,
Cyprien Morize,
Alban Sauret,
Philippe Gondret
Abstract:
Tsunami waves induced by landslides are a threat to human activities and safety along coastal areas. In this paper, we characterize experimentally the waves generated by the gravity-driven collapse of a dry granular column into water. Three nonlinear wave regimes are identified depending on the Froude number $\mathrm{Fr}_f$ based on the ratio of the velocity of the advancing granular front and the…
▽ More
Tsunami waves induced by landslides are a threat to human activities and safety along coastal areas. In this paper, we characterize experimentally the waves generated by the gravity-driven collapse of a dry granular column into water. Three nonlinear wave regimes are identified depending on the Froude number $\mathrm{Fr}_f$ based on the ratio of the velocity of the advancing granular front and the velocity of linear gravity waves in shallow water: transient bores for large $\mathrm{Fr}_f$, solitary waves for intermediate values of $\mathrm{Fr}_f$, and non-linear transition waves at small $\mathrm{Fr}_f$. The wave amplitude relative to the water depth increases with $\mathrm{Fr}_f$ in the three regimes but with different non-linear scalings, and the relative wavelength is an increasing or decreasing function of $\mathrm{Fr}_f$. Two of these wave regimes are rationalized by considering that the advancing granular front acts as a vertical piston pushing the water, while the last one is found to be a transition from shallow to deep water conditions. The present modeling contributes to a better understanding of the rich hydrodynamics of the generated waves, with coastal risk assessment as practical applications.
△ Less
Submitted 28 May, 2021;
originally announced May 2021.
-
Droplet detachment and pinch-off of bidisperse particulate suspensions
Authors:
Virgile Thiévenaz,
Sreeram Rajesh,
Alban Sauret
Abstract:
When a droplet is generated, the ligament connecting the drop to the nozzle thins down and eventually pinches off. Adding solid particles to the liquid phase leads to a more complex dynamic, notably by increasing the shear viscosity. Moreover, it introduces an additional length scale to the system, the diameter of the particles, which eventually becomes comparable to the diameter of the ligament.…
▽ More
When a droplet is generated, the ligament connecting the drop to the nozzle thins down and eventually pinches off. Adding solid particles to the liquid phase leads to a more complex dynamic, notably by increasing the shear viscosity. Moreover, it introduces an additional length scale to the system, the diameter of the particles, which eventually becomes comparable to the diameter of the ligament. In this paper, we experimentally investigate the thinning and pinch-off of drops of suspensions with two different sizes of particles. We characterize the thinning for different particle size ratios and different proportions of small particles. Long before the pinch-off, the thinning rate is that of an equivalent liquid whose viscosity is that of the suspension. Later, when the ligament thickness approaches the size of the large particles, the thinning accelerates and leads to an early pinch-off. We explain how the bidisperse particle size distribution lowers the viscosity by making the packing more efficient, which speeds up the thinning. This result can be used to predict the dynamics of droplet formation with bidisperse suspensions.
△ Less
Submitted 20 May, 2021;
originally announced May 2021.
-
Pinch-off of viscoelastic particulate suspensions
Authors:
Virgile Thiévenaz,
Alban Sauret
Abstract:
The formation of drops of a complex fluid, for instance including dissolved polymers and/or solid particles, has practical implications in several industrial and biophysical processes. In this Letter, we experimentally investigate the generation of drops of a viscoelastic suspension, made of non-Brownian spherical particles dispersed in a dilute polymer solution. Using high-speed imaging, we chara…
▽ More
The formation of drops of a complex fluid, for instance including dissolved polymers and/or solid particles, has practical implications in several industrial and biophysical processes. In this Letter, we experimentally investigate the generation of drops of a viscoelastic suspension, made of non-Brownian spherical particles dispersed in a dilute polymer solution. Using high-speed imaging, we characterize the different stages of the detachment. Our experiments show that the particles primarily affect the initial Newtonian necking by increasing the fluid viscosity. In the viscoelastic regime, particles do not affect the thinning until the onset of the blistering instability, which they accelerate. We find that the transition from one regime to another, which corresponds to the coil-stretch transition of the polymer chains, strongly depends on the particle content. Considering that the presence of rigid particles increase the deformation of the liquid phase, we propose an expression for the local strain rate in the suspension, which rationalizes our experimental results. This method could enable the precise measurement of local stresses in particulate suspensions.
△ Less
Submitted 9 April, 2021;
originally announced April 2021.
-
Mean zonal flows induced by weak mechanical forcings in rotating spheroids
Authors:
David Cébron,
Jérémie Vidal,
Nathanaël Schaeffer,
Antonin Borderies,
Alban Sauret
Abstract:
The generation of mean flows is a long-standing issue in rotating fluids. Motivated by planetary objects, we consider here a rapidly rotating fluid-filled spheroid, which is subject to weak perturbations of either the boundary (e.g. tides) or the rotation vector (e.g. in direction by precession, or in magnitude by longitudinal librations). Using boundary-layer theory, we determine the mean zonal f…
▽ More
The generation of mean flows is a long-standing issue in rotating fluids. Motivated by planetary objects, we consider here a rapidly rotating fluid-filled spheroid, which is subject to weak perturbations of either the boundary (e.g. tides) or the rotation vector (e.g. in direction by precession, or in magnitude by longitudinal librations). Using boundary-layer theory, we determine the mean zonal flows generated by nonlinear interactions within the viscous Ekman layer. These flows are of interest because they survive in the relevant planetary regime of both vanishing forcings and viscous effects. We extend the theory to take into account (i) the combination of spatial and temporal perturbations, providing new mechanically driven zonal flows (e.g. driven by latitudinal librations), and (ii) the spheroidal geometry relevant for planetary bodies. Wherever possible, our analytical predictions are validated with direct numerical simulations. The theoretical solutions are in good quantitative agreement with the simulations, with expected discrepancies (zonal jets) in the presence of inertial waves generated at the critical latitudes (as for precession). Moreover, we find that the mean zonal flows can be strongly affected in spheroids. Guided by planetary applications, we also revisit the scaling laws for the geostrophic shear layers at the critical latitudes, and the influence of a solid inner core.
△ Less
Submitted 24 September, 2021; v1 submitted 18 March, 2021;
originally announced March 2021.
-
Capillary filtering of particles during dip coating
Authors:
Alban Sauret,
Adrien Gans,
Benedicte Colnet,
Guillaume Saingier,
Martin Z. Bazant,
Emilie Dressaire
Abstract:
An object withdrawn from a liquid bath is coated with a thin layer of liquid. Along with the liquid, impurities such as particles present in the bath can be transferred to the withdrawn substrate. Entrained particles locally modify the thickness of the film, hence altering the quality and properties of the coating. In this study, we show that it is possible to entrain the liquid alone and avoid co…
▽ More
An object withdrawn from a liquid bath is coated with a thin layer of liquid. Along with the liquid, impurities such as particles present in the bath can be transferred to the withdrawn substrate. Entrained particles locally modify the thickness of the film, hence altering the quality and properties of the coating. In this study, we show that it is possible to entrain the liquid alone and avoid contamination of the substrate, at sufficiently low withdrawal velocity in diluted suspensions. Using a model system consisting of a plate exiting a liquid bath, we observe that particles can remain trapped in the meniscus which exerts a resistive capillary force to the entrainment. We characterize different entrainment regimes as the withdrawal velocity increases: from a pure liquid film, to a liquid film containing clusters of particles, and eventually individual particles. This capillary filtration is an effective barrier against the contamination of substrates withdrawn from a polluted bath and finds application against biocontamination.
△ Less
Submitted 27 November, 2020;
originally announced November 2020.
-
Capillary Sorting of Particles by Dip Coating
Authors:
Brian M. Dincau,
Martin Z. Bazant,
Emilie Dressaire,
Alban Sauret
Abstract:
In this letter, we describe the capillary sorting of particles by size based on dip coating. A substrate withdrawn from a liquid bath entrains a coating whose thickness depends on the withdrawal speed and the liquid properties. If the coating material contains particles, they will only be entrained when the viscous force pulling them with the substrate overcomes the opposing capillary force at the…
▽ More
In this letter, we describe the capillary sorting of particles by size based on dip coating. A substrate withdrawn from a liquid bath entrains a coating whose thickness depends on the withdrawal speed and the liquid properties. If the coating material contains particles, they will only be entrained when the viscous force pulling them with the substrate overcomes the opposing capillary force at the deformable meniscus. This force threshold occurs at different liquid thicknesses for particles of different sizes. Here, we show that this difference can be used to separate small particles from a mixed suspension through capillary filtration. In a bidisperse suspension, we observe three distinct filtration regimes. At low capillary numbers, Ca, no particles are entrained in the liquid coating. At high Ca, all particle sizes are entrained. For a range of capillary numbers between these two extremes, only the smallest particles are entrained while the larger ones remain in the reservoir. We explain how this technique can be applied to polydisperse suspension. We also provide an estimate of the range of capillary number to separate particles of given sizes. The combination of this technique with the scalability and robustness of dip coating makes it a promising candidate for high-throughput separation or purification of industrial and biomedical suspensions.
△ Less
Submitted 2 November, 2020;
originally announced November 2020.
-
Deposition of a particle-laden film on the inner wall of a tube
Authors:
Deok-Hoon Jeong,
Anezka Kvasnickova,
Jean-Baptiste Boutin,
David Cebron,
Alban Sauret
Abstract:
The withdrawal of a liquid or the translation of a liquid slug in a capillary tube leads to the deposition of a thin film on the inner wall. When particles or contaminants are present in the liquid, they deposit and contaminate the tube if the liquid film is sufficiently thick. In this article, we experimentally investigate the condition under which particles are deposited during the air invasion…
▽ More
The withdrawal of a liquid or the translation of a liquid slug in a capillary tube leads to the deposition of a thin film on the inner wall. When particles or contaminants are present in the liquid, they deposit and contaminate the tube if the liquid film is sufficiently thick. In this article, we experimentally investigate the condition under which particles are deposited during the air invasion in a capillary tube initially filled with a dilute suspension. We show that the entrainment of particles in the film is controlled by the ratio of the particle and the tube radii and the capillary number associated with the front velocity. We also develop a model which suggests optimal operating conditions to avoid contamination during withdrawal of a suspension. This deposition mechanism can also be leveraged in coating processes by controlling the deposition of particles on the inner walls of channels.
△ Less
Submitted 29 October, 2020;
originally announced October 2020.
-
Experimental investigation of tsunami waves generated by granular collapse into water
Authors:
M. Robbe-Saule,
C. Morize,
R. Henaff,
Y. Bertho,
A. Sauret,
P. Gondret
Abstract:
The generation of a tsunami wave by an aerial landslide is investigated through model laboratory experiments. We examine the collapse of an initially dry column of grains into a shallow water layer and the subsequent generation of waves. The experiments show that the collective entry of the granular material into water governs the wave generation process. We observe that the amplitude of the wave…
▽ More
The generation of a tsunami wave by an aerial landslide is investigated through model laboratory experiments. We examine the collapse of an initially dry column of grains into a shallow water layer and the subsequent generation of waves. The experiments show that the collective entry of the granular material into water governs the wave generation process. We observe that the amplitude of the wave relative to the water height scales linearly with the Froude number based on the horizontal velocity of the moving granular front relative to the wave velocity. For all the different parameters considered here, the aspect ratio and the volume of the column, the diameter and density of the grains, and the height of the water, the granular collapse acts like a moving piston displacing the water. We also highlight that the density of the falling grains has a negligible influence on the wave amplitude, which suggests that the volume of grains entering the water is the relevant parameter in the wave generation.
△ Less
Submitted 23 October, 2020;
originally announced October 2020.
-
Entrainment of particles during the withdrawal of a fiber from a dilute suspension
Authors:
B. M. Dincau,
E. Mai,
Q. Magdelaine,
J. A. Lee,
M. Z. Bazant,
A. Sauret
Abstract:
A fiber withdrawn from a bath of a dilute particulate suspension exhibits different coating regimes depending on the physical properties of the fluid, the withdrawal speed, the particle sizes, and the radius of the fiber. Our experiments indicate that only the liquid without particles is entrained for thin coating films. Beyond a threshold capillary number, the fiber is coated by a liquid film wit…
▽ More
A fiber withdrawn from a bath of a dilute particulate suspension exhibits different coating regimes depending on the physical properties of the fluid, the withdrawal speed, the particle sizes, and the radius of the fiber. Our experiments indicate that only the liquid without particles is entrained for thin coating films. Beyond a threshold capillary number, the fiber is coated by a liquid film with entrained particles. We systematically characterize the role of the capillary number, the particle size, and the fiber radius on the threshold speed for particle entrainment. We discuss the boundary between these two regimes and show that the thickness of the liquid film at the stagnation point controls the entrainment process. The radius of the fiber provides a new degree of control in capillary filtering, allowing greater control over the size of the particles entrained in the film.
△ Less
Submitted 27 June, 2020;
originally announced June 2020.
-
Spreading and fragmentation of particle-laden liquid sheets
Authors:
Pascal S. Raux,
Anthony Troger,
Pierre Jop,
Alban Sauret
Abstract:
The fragmentation of liquid sheets produces a collection of droplets. The size distribution of the droplets has a considerable impact on the coating efficiency of sprays and the transport of contaminants. Although many processes commonly used particulate suspensions, the influence of the particles on the spreading dynamics of the sheet and its subsequent fragmentation has so far been considered ne…
▽ More
The fragmentation of liquid sheets produces a collection of droplets. The size distribution of the droplets has a considerable impact on the coating efficiency of sprays and the transport of contaminants. Although many processes commonly used particulate suspensions, the influence of the particles on the spreading dynamics of the sheet and its subsequent fragmentation has so far been considered negligible. In this paper, we consider experimentally a transient suspension sheet that expands radially. We characterize the influence of the particles on the dynamics of the liquid sheet and the fragmentation process. We highlight that the presence of particles modifies the thickness and reduces the stability of the liquid sheet. Our study suggests that particles can significantly modify the dynamics of liquid films through capillary effects, even for volume fractions much smaller than the maximum packing.
△ Less
Submitted 28 April, 2020;
originally announced April 2020.
-
Air entrainment and granular bubbles produced by an im**ing jet of grains into water
Authors:
A. M. Cervantes-Alvarez,
Y. Y. Escobar-Ortega,
A. Sauret,
F. Pacheco-Vazquez
Abstract:
A jet of water entering into a pool of the same liquid can generate air entrainment and form bubbles that rapidly raise to the surface and disintegrate. Here we report the equivalent phenomenon produced by a plunging dry granular jet, so far unexplored. For grains smaller than a critical size, the granular jet entering into the pool produces air entrainment that leads to bubbles formation. The bub…
▽ More
A jet of water entering into a pool of the same liquid can generate air entrainment and form bubbles that rapidly raise to the surface and disintegrate. Here we report the equivalent phenomenon produced by a plunging dry granular jet, so far unexplored. For grains smaller than a critical size, the granular jet entering into the pool produces air entrainment that leads to bubbles formation. The bubbles formed are covered by a shell of grains attached to the bubble air-water interface due to capillary-induced cohesion. In contrast to classical air bubbles, these "granular bubbles" are stable over time because the granular shell prevents coalescence and keeps the air encapsulated either if the bubbles rise to the surface or sink to the bottom of the pool, which is determined by the competition of the buoyant force and the weight of the assembly. Experimentally, we show how the bubble size and volume of entrained air depend on the grain size, liquid properties and jet impact velocity.
△ Less
Submitted 7 December, 2019;
originally announced December 2019.
-
Influence of the size of the intruder on the reorganization of a 2D granular medium
Authors:
Aymeric Merceron,
Alban Sauret,
Pierre Jop
Abstract:
We consider the rearrangements of a vertical twodimensional granular packing induced by the withdrawal of an intruder. Here, we focus on the influence of the size of the intruder on the reorganization process. The long term evolution of the granular packing is investigated as well as the avalanche dynamics that characterize the short term rearrangements around the intruder. For small enough intrud…
▽ More
We consider the rearrangements of a vertical twodimensional granular packing induced by the withdrawal of an intruder. Here, we focus on the influence of the size of the intruder on the reorganization process. The long term evolution of the granular packing is investigated as well as the avalanche dynamics that characterize the short term rearrangements around the intruder. For small enough intruder, we observe the formation of arches that periodically destabilize and influence the reorganization dynamics of the two-dimensional packing through larger rearrangement events.
△ Less
Submitted 25 July, 2019;
originally announced July 2019.
-
Dip-coating of suspensions
Authors:
A. Gans,
E. Dressaire,
B. Colnet,
G. Saingier,
M. Z. Bazant,
A. Sauret
Abstract:
Withdrawing a plate from a suspension leads to the entrainment of a coating layer of fluid and particles on the solid surface. In this article, we study the Landau-Levich problem in the case of a suspension of non-Brownian particles at moderate volume fraction $10\% < φ< 41\%$. We observe different regimes depending on the withdrawal velocity $U$, the volume fraction of the suspension $φ$, and the…
▽ More
Withdrawing a plate from a suspension leads to the entrainment of a coating layer of fluid and particles on the solid surface. In this article, we study the Landau-Levich problem in the case of a suspension of non-Brownian particles at moderate volume fraction $10\% < φ< 41\%$. We observe different regimes depending on the withdrawal velocity $U$, the volume fraction of the suspension $φ$, and the diameter of the particles $2\,a$. Our results exhibit three coating regimes. (i) At small enough capillary number $Ca$, no particles are entrained, and only a liquid film coats the plate. (ii) At large capillary number, we observe that the thickness of the entrained film of suspension is captured by the Landau-Levich law using the effective viscosity of the suspension $η(φ)$. (iii) At intermediate capillary numbers, the situation becomes more complicated with a heterogeneous coating on the substrate. We rationalize our experimental findings by providing the domain of existence of these three regimes as a function of the fluid and particles properties.
△ Less
Submitted 22 March, 2019;
originally announced March 2019.
-
Growth of clogs in parallel microchannels
Authors:
Alban Sauret,
Katarzyna Somszor,
Emmanuel Villermaux,
Emilie Dressaire
Abstract:
During the transport of colloidal suspensions in microchannels, the deposition of particles can lead to the formation of clogs, typically at constrictions. Once a clog is formed in a microchannel, advected particles form an aggregate upstream from the site of the blockage. This aggregate grows over time, which leads to a dramatic reduction of the flow rate. In this paper, we present a model that p…
▽ More
During the transport of colloidal suspensions in microchannels, the deposition of particles can lead to the formation of clogs, typically at constrictions. Once a clog is formed in a microchannel, advected particles form an aggregate upstream from the site of the blockage. This aggregate grows over time, which leads to a dramatic reduction of the flow rate. In this paper, we present a model that predicts the growth of the aggregate formed upon clogging of a microchannel. We develop an analytical description that captures the time evolution of the volume of the aggregate, as confirmed by experiments performed using a pressure-driven suspension flow in a microfluidic device. We show that the growth of the aggregate increases the hydraulic resistance in the channel and leads to a drop in the flow rate of the suspensions. We then derive a model for the growth of aggregates in multiple parallel microchannels where the clogging events are described using a stochastic approach. The aggregate growths in the different channels are coupled. Our work illustrates the critical influence of clogging events on the evolution of the flow rate in microchannels. The coupled dynamics of the aggregates described here for parallel channels is key to bridge clogging at the pore scale with macroscopic observations of the flow rate evolution at the filter scale.
△ Less
Submitted 29 November, 2018;
originally announced November 2018.
-
Cooperative effects induced by intruders evolving through a granular medium
Authors:
Aymeric Merceron,
Alban Sauret,
Pierre Jop
Abstract:
Applying mechanical perturbations in a granular assembly may rearrange the configuration of the particles. However, the spatial propagation of an event is not related to the size of the external perturbation alone. Thus, the characteristic length scale of an event is not well defined. In this study, we trigger rearrangements by driving two intruders through a vertical two-dimensional packing of di…
▽ More
Applying mechanical perturbations in a granular assembly may rearrange the configuration of the particles. However, the spatial propagation of an event is not related to the size of the external perturbation alone. Thus, the characteristic length scale of an event is not well defined. In this study, we trigger rearrangements by driving two intruders through a vertical two-dimensional packing of disks. The amplitude of the rearrangements of the granular assembly appearing around the two evolving intruders is related to their separating distances. We show that there exists a characteristic distance between intruders under which the dynamics of the grains above one intruder is influenced by the other. The size of the intruders has little effect on this characteristic length. Finally, we show that the correlation between the movements of the grains decreases with the distance away from the intruders over a larger length scale.
△ Less
Submitted 23 May, 2018;
originally announced May 2018.
-
Competitive dynamics of two erosion patterns around a cylinder
Authors:
F. Lachaussée,
Y. Bertho,
C. Morize,
A. Sauret,
P. Gondret
Abstract:
We investigate experimentally the local erosion of a granular bed near a fixed vertical cylinder that emerges from the bed. The onset of erosion arising at the base of the cylinder and usually ascribed to the wrap** horseshoe vortex is determined and rationalized by a flow contraction effect. We report a new erosion pattern visible downstream of the cylinder that consists of two side-by-side elo…
▽ More
We investigate experimentally the local erosion of a granular bed near a fixed vertical cylinder that emerges from the bed. The onset of erosion arising at the base of the cylinder and usually ascribed to the wrap** horseshoe vortex is determined and rationalized by a flow contraction effect. We report a new erosion pattern visible downstream of the cylinder that consists of two side-by-side elongated holes. This pattern is observed for flow regimes close to the horseshoe scour onset, whose growth usually inhibits its spatiotemporal development.
△ Less
Submitted 7 March, 2018; v1 submitted 17 January, 2018;
originally announced January 2018.
-
Drop impact dynamics on slippery liquid-infused porous surfaces: influence of oil thickness
Authors:
M. Muschi,
B. Brudieu,
J. Teisseire,
A. Sauret
Abstract:
Slippery liquid-infused porous surfaces (SLIPS) are porous nanostructures impregnated with a low surface tension lubricant. They have recently shown great promise in various applications that require non-wettable superhydrophobic surfaces. In this paper, we investigate experimentally the influence of the oil thickness on the wetting properties and drop impact dynamics of new SLIPS. By tuning the t…
▽ More
Slippery liquid-infused porous surfaces (SLIPS) are porous nanostructures impregnated with a low surface tension lubricant. They have recently shown great promise in various applications that require non-wettable superhydrophobic surfaces. In this paper, we investigate experimentally the influence of the oil thickness on the wetting properties and drop impact dynamics of new SLIPS. By tuning the thickness of the oil layer deposited through spin-coating, we show that a sufficiently thick layer of oil is necessary to avoid dewetting spots on the porous nanostructure and thus increasing the homogeneity of the liquid distribution. Drop impact on these surfaces is investigated with a particular emphasis on the spreading and rebound dynamics when varying the oil thickness and the Weber number.
△ Less
Submitted 16 January, 2018;
originally announced January 2018.
-
Resuspension threshold of a granular bed by localized heating
Authors:
Cyprien Morize,
Eric Herbert,
Alban Sauret
Abstract:
The resuspension and dispersion of particles occur in industrial fluid dynamic processes as well as environmental and geophysical situations. In this paper, we experimentally investigate the ability to fluidize a granular bed with a vertical gradient of temperature. Using laboratory experiments with a localized heat source, we observe a large entrainment of particles into the fluid volume beyond a…
▽ More
The resuspension and dispersion of particles occur in industrial fluid dynamic processes as well as environmental and geophysical situations. In this paper, we experimentally investigate the ability to fluidize a granular bed with a vertical gradient of temperature. Using laboratory experiments with a localized heat source, we observe a large entrainment of particles into the fluid volume beyond a threshold temperature. The buoyancy-driven fluidized bed then leads to the transport of solid particles through the generation of particle-laden plumes. We show that the destabilization process is driven by the thermal conductivity inside the granular bed and demonstrate that the threshold temperature depends on the thickness of the granular bed and the buoyancy number, i.e., the ratio of the stabilizing density contrast to the destabilizing thermal density contrast.
△ Less
Submitted 6 September, 2017;
originally announced September 2017.
-
Accretion Dynamics on Wet Granular Materials
Authors:
Guillaume Saingier,
Alban Sauret,
Pierre Jop
Abstract:
Wet granular aggregates are common precursors of construction materials, food, and health care products. The physical mechanisms involved in the mixing of dry grains with a wet substrate are not well understood and difficult to control. Here, we study experimentally the accretion of dry grains on a wet granular substrate by measuring the growth dynamics of the wet aggregate. We show that this aggr…
▽ More
Wet granular aggregates are common precursors of construction materials, food, and health care products. The physical mechanisms involved in the mixing of dry grains with a wet substrate are not well understood and difficult to control. Here, we study experimentally the accretion of dry grains on a wet granular substrate by measuring the growth dynamics of the wet aggregate. We show that this aggregate is fully saturated and its cohesion is ensured by the capillary depression at the air-liquid interface. The growth dynamics is controlled by the liquid fraction at the surface of the aggregate and exhibits two regimes. In the viscous regime, the growth dynamics is limited by the capillary-driven flow of liquid through the granular packing to the surface of the aggregate. In the capture regime, the capture probability depends on the availability of the liquid at the saturated interface, which is controlled by the hydrostatic depression in the material. We propose a model that rationalizes our observations and captures both dynamics based on the evolution of the capture probability with the hydrostatic depression.
△ Less
Submitted 22 May, 2017;
originally announced May 2017.
-
Drop morphologies on flexible fibers: influence of elastocapillary effects
Authors:
Alban Sauret,
Francois Boulogne,
Katarzyna Somszor,
Emilie Dressaire,
Howard A. Stone
Abstract:
Various materials are made of long thin fibers that are randomly oriented to form a complex network in which drops of wetting liquid tend to accumulate at the nodes. The capillary force exerted by the liquid can bend flexible fibers, which in turn influences the morphology adopted by the liquid. In this paper, we investigate, the role of the fiber flexibility on the shape of a small volume of liqu…
▽ More
Various materials are made of long thin fibers that are randomly oriented to form a complex network in which drops of wetting liquid tend to accumulate at the nodes. The capillary force exerted by the liquid can bend flexible fibers, which in turn influences the morphology adopted by the liquid. In this paper, we investigate, the role of the fiber flexibility on the shape of a small volume of liquid on a pair of crossed flexible fibers, through a model situation. We characterize the liquid morphologies as we vary the volume of liquid, the angle between the fibers, and the length of the fibers. The drop morphologies previously reported for rigid crossed fibers, i.e., a drop, a column and a mixed morphology, are also observed on flexible crossed fibers with modified domains of existence. In addition, at small tilting angles between the fibers, a new behavior is observed: the fibers bend and collapse. Depending on the volume of liquid, a thin column with or without a drop is reported on the collapsed fibers. Our study suggests that the fiber flexibility adds a rich variety of behaviors that may be important for some applications.
△ Less
Submitted 8 October, 2016;
originally announced October 2016.
-
Reorganization of a granular medium around a localized transformation
Authors:
Aymeric Merceron,
Alban Sauret,
Pierre Jop
Abstract:
Physical and chemical transformation processes in reactive granular media involve the reorganization of the structure. In this paper, we study experimentally the rearrangements of a two-dimensional (2D) granular packing undergoing a localized transformation. We track the position and evolution of all the disks that constitute the granular packing when either a large intruder shrinks in size or is…
▽ More
Physical and chemical transformation processes in reactive granular media involve the reorganization of the structure. In this paper, we study experimentally the rearrangements of a two-dimensional (2D) granular packing undergoing a localized transformation. We track the position and evolution of all the disks that constitute the granular packing when either a large intruder shrinks in size or is pulled out of the granular structure. In the two situations the displacements at long time are similar to 2D quasistatic silo flows whereas the short-time dynamic is heterogeneous in both space and time. We observe an avalanchelike behavior with power-law distributed events uncorrelated in time. In addition, the instantaneous evolutions of the local solid fraction exhibit self-similar distributions. The averages and the standard deviations of the solid fraction variations can be rescaled, suggesting a single mechanism of rearrangement.
△ Less
Submitted 24 June, 2016;
originally announced June 2016.
-
Tunable transport of drops on a vibrating inclined fiber
Authors:
Alison Bick,
François Boulogne,
Alban Sauret,
Howard A. Stone
Abstract:
Transport of liquid drops in fibrous media occurs in various engineering systems such as fog harvesting or cleaning of textiles. The ability to tune or to control liquid movement can increase the system efficiency and enable new engineering applications. In this Letter, we experimentally investigate how partially wetting drops on a single fiber can be manipulated by vibrating the fiber. We show th…
▽ More
Transport of liquid drops in fibrous media occurs in various engineering systems such as fog harvesting or cleaning of textiles. The ability to tune or to control liquid movement can increase the system efficiency and enable new engineering applications. In this Letter, we experimentally investigate how partially wetting drops on a single fiber can be manipulated by vibrating the fiber. We show that a sliding motion along the fiber or a drip** of the drop can be triggered by standing waves. We identify the conditions on the drop volume, the fiber tilt angle and the amplitude and frequency of oscillations to observe these different behaviors. Finally, we experimentally illustrate that vibrations can be used to control the transport and the collection of water drops along a fiber using a combination of the sliding and drip** transitions.
△ Less
Submitted 25 October, 2015;
originally announced October 2015.
-
Drop impact on a flexible fiber
Authors:
Emilie Dressaire,
Alban Sauret,
François Boulogne,
Howard A. Stone
Abstract:
When droplets impact fibrous media, the liquid can be captured by the fibers or contact then break away. Previous studies have shown that the efficiency of drop capture by a rigid fiber depends on the impact velocity and defined a threshold velocity below which the drop is captured. However, it is necessary to consider the coupling of elastic and capillary effects to achieve a greater understandin…
▽ More
When droplets impact fibrous media, the liquid can be captured by the fibers or contact then break away. Previous studies have shown that the efficiency of drop capture by a rigid fiber depends on the impact velocity and defined a threshold velocity below which the drop is captured. However, it is necessary to consider the coupling of elastic and capillary effects to achieve a greater understanding of the capture process for soft substrates. Here, we study experimentally the dynamics of a single drop impacting on a thin flexible fiber. Our results demonstrate that the threshold capture velocity depends on the flexibility of fibers in a non-monotonic way. We conclude that tuning the mechanical properties of fibers can optimize the efficiency of droplet capture.
△ Less
Submitted 6 October, 2015;
originally announced October 2015.
-
Wetting morphologies on randomly oriented fibers
Authors:
Alban Sauret,
François Boulogne,
Beatrice Soh,
Emilie Dressaire,
Howard A. Stone
Abstract:
We characterize the different morphologies adopted by a drop of liquid placed on two randomly oriented fibers, which is a first step toward understanding the wetting of fibrous networks. The present work reviews previous modeling for parallel and touching crossed fibers and extends it to an arbitrary orientation of the fibers characterized by the tilting angle and the minimum spacing distance. Dep…
▽ More
We characterize the different morphologies adopted by a drop of liquid placed on two randomly oriented fibers, which is a first step toward understanding the wetting of fibrous networks. The present work reviews previous modeling for parallel and touching crossed fibers and extends it to an arbitrary orientation of the fibers characterized by the tilting angle and the minimum spacing distance. Depending on the volume of liquid, the spacing distance between fibers and the angle between the fibers, we highlight that the liquid can adopt three different equilibrium morphologies: (1) a column morphology in which the liquid spreads between the fibers, (2) a mixed morphology where a drop grows at one end of the column or (3) a single drop located at the node. We capture the different morphologies observed using an analytical model that predicts the equilibrium configuration of the liquid based on the geometry of the fibers and the volume of liquid.
△ Less
Submitted 28 August, 2015;
originally announced August 2015.
-
Wetting morphologies on an array of fibers of different radii
Authors:
Alban Sauret,
François Boulogne,
David Cébron,
Emilie Dressaire,
Howard A. Stone
Abstract:
We investigate the equilibrium morphology of a finite volume of liquid placed on two parallel rigid fibers of different radii. As observed for identical radii fibers, the liquid is either in a column morphology or adopts a drop shape depending on the inter-fiber distance. However the cross-sectional area and the critical inter-fiber distance at which the transition occurs are both modified by the…
▽ More
We investigate the equilibrium morphology of a finite volume of liquid placed on two parallel rigid fibers of different radii. As observed for identical radii fibers, the liquid is either in a column morphology or adopts a drop shape depending on the inter-fiber distance. However the cross-sectional area and the critical inter-fiber distance at which the transition occurs are both modified by the polydispersity of the fibers. Using energy considerations, we analytically predict the critical inter-fiber distance corresponding to the transition between the column and the drop morphologies occurs. This distance depends both on the radii of the fibers and on the contact angle of the liquid. We perform experiments using a perfectly wetting liquid on two parallel nylon fibers: the results are in good agreement with our analytical model. The morphology of the capillary bridges between fibers of different radii is relevant to the modeling of large arrays of polydisperse fibers.
△ Less
Submitted 22 April, 2015; v1 submitted 18 February, 2015;
originally announced February 2015.
-
Mechanical tuning of the evaporation rate of liquid on crossed fibers
Authors:
François Boulogne,
Alban Sauret,
Beatrice Soh,
Emilie Dressaire,
Howard A. Stone
Abstract:
We investigate experimentally the drying of a small volume of perfectly wetting liquid on two crossed fibers. We characterize the drying dynamics for the three liquid morphologies that are encountered in this geometry: drop, column and a mixed morphology, in which a drop and a column coexist. For each morphology, we rationalize our findings with theoretical models that capture the drying kinetics.…
▽ More
We investigate experimentally the drying of a small volume of perfectly wetting liquid on two crossed fibers. We characterize the drying dynamics for the three liquid morphologies that are encountered in this geometry: drop, column and a mixed morphology, in which a drop and a column coexist. For each morphology, we rationalize our findings with theoretical models that capture the drying kinetics. We find that the evaporation rate depends significantly on the liquid morphology and that the drying of liquid column is faster than the evaporation of the drop and the mixed morphology for a given liquid volume. Finally, we illustrate that shearing a network of fibers reduces the angle between them, changes the morphology towards the column state, and so enhances the drying rate of a volatile liquid deposited on it.
△ Less
Submitted 11 March, 2015; v1 submitted 7 January, 2015;
originally announced January 2015.
-
Dam** of liquid sloshing by foams
Authors:
Alban Sauret,
François Boulogne,
Jean Cappello,
Emilie Dressaire,
Howard A. Stone
Abstract:
When a container is set in motion, the free surface of the liquid starts to oscillate or slosh. Such effects can be observed when a glass of water is handled carelessly and the fluid sloshes or even spills over the rims of the container. However, beer does not slosh as readily as water, which suggests that foam could be used to damp sloshing. In this work, we study experimentally the effect on slo…
▽ More
When a container is set in motion, the free surface of the liquid starts to oscillate or slosh. Such effects can be observed when a glass of water is handled carelessly and the fluid sloshes or even spills over the rims of the container. However, beer does not slosh as readily as water, which suggests that foam could be used to damp sloshing. In this work, we study experimentally the effect on sloshing of a liquid foam placed on top of a liquid bath. We generate a monodisperse two-dimensional liquid foam in a rectangular container and track the motion of the foam. The influence of the foam on the sloshing dynamics is experimentally characterized: only a few layers of bubbles are sufficient to significantly damp the oscillations. We rationalize our experimental findings with a model that describes the foam contribution to the dam** coefficient through viscous dissipation on the walls of the container. Then we extend our study to confined three-dimensional liquid foam and observe that the behavior of 2D and confined 3D systems are very similar. Thus we conclude that only the bubbles close to the walls have a significant impact on the dissipation of energy. The possibility to damp liquid sloshing using foam is promising in numerous industrial applications such as the transport of liquefied gas in tankers or for propellants in rocket engines.
△ Less
Submitted 1 February, 2015; v1 submitted 24 November, 2014;
originally announced November 2014.
-
Dam** of liquid sloshing by foams: from everyday observations to liquid transport
Authors:
Jean Cappello,
Alban Sauret,
François Boulogne,
Emilie Dressaire,
Howard A. Stone
Abstract:
We perform experiments on the sloshing dynamics of liquids in a rectangular container submitted to an impulse. We show that when foam is placed on top of the liquid the oscillations of the free interface are significantly damped. The ability to reduce sloshing and associated splashing could find applications in numerous industrial processes involving liquid transport.
We perform experiments on the sloshing dynamics of liquids in a rectangular container submitted to an impulse. We show that when foam is placed on top of the liquid the oscillations of the free interface are significantly damped. The ability to reduce sloshing and associated splashing could find applications in numerous industrial processes involving liquid transport.
△ Less
Submitted 8 November, 2014;
originally announced November 2014.
-
Clogging by sieving in microchannels: Application to the detection of contaminants in colloidal suspensions
Authors:
Alban Sauret,
Erin C. Barney,
Adeline Perro,
Emmanuel Villermaux,
Howard A. Stone,
Emilie Dressaire
Abstract:
We report on a microfluidic method that allows measurement of a small concentration of large contaminants in suspensions of solid micrometer-scale particles. To perform the measurement, we flow the colloidal suspension through a series of constrictions, i.e. a microchannel of varying cross-section. We show and quantify the role of large contaminants in the formation of clogs at a constriction and…
▽ More
We report on a microfluidic method that allows measurement of a small concentration of large contaminants in suspensions of solid micrometer-scale particles. To perform the measurement, we flow the colloidal suspension through a series of constrictions, i.e. a microchannel of varying cross-section. We show and quantify the role of large contaminants in the formation of clogs at a constriction and the growth of the resulting filter cake. By measuring the time interval between two clogging events in an array of parallel microchannels, we are able to estimate the concentration of contaminants whose size is selected by the geometry of the microfluidic device. This technique for characterizing colloidal suspensions offers a versatile and rapid tool to explore the role of contaminants on the properties of the suspensions.
△ Less
Submitted 22 August, 2014;
originally announced August 2014.
-
Bulldozing of granular material
Authors:
A. Sauret,
N. J. Balmforth,
C. P. Caulfield,
J. N. McElwaine
Abstract:
We investigate the bulldozing motion of a granular sandpile driven forwards by a vertical plate. The problem is set up in the laboratory by emplacing the pile on a table rotating underneath a stationary plate; the continual circulation of the bulldozed material allows the dynamics to be explored over relatively long times, and the variation of the velocity with radius permits one to explore the de…
▽ More
We investigate the bulldozing motion of a granular sandpile driven forwards by a vertical plate. The problem is set up in the laboratory by emplacing the pile on a table rotating underneath a stationary plate; the continual circulation of the bulldozed material allows the dynamics to be explored over relatively long times, and the variation of the velocity with radius permits one to explore the dependence on bulldozing speed within a single experiment. We measure the time-dependent surface shape of the dune for a range of rotation rates, initial volumes and radial positions, for four granular materials, ranging from glass spheres to irregularly shaped sand. The evolution of the dune can be separated into two phases: a rapid initial adjustment to a state of quasi-steady avalanching perpendicular to the blade, followed by a much slower phase of lateral spreading and radial migration. The quasi-steady avalanching sets up a well-defined perpendicular profile with a nearly constant slope. This profile can be scaled by the depth against the bulldozer to collapse data from different times, radial positions and experiments onto common master curves that are characteristic of the granular material and depend on the local Froude number. The lateral profile of the dune along the face of the bulldozer varies more gradually with radial position, and evolves by slow lateral spreading. The spreading is asymmetrical, with the inward progress of the dune eventually arrested and its bulk migrating to larger radii. A one-dimensional depth-averaged model recovers the nearly linear perpendicular profile of the dune, but does not capture the finer nonlinear details of the master curves. A two-dimensional version of the model leads to an advection-diffusion equation that reproduces the lateral spreading and radial migration.
△ Less
Submitted 1 May, 2014;
originally announced May 2014.
-
Wetting of crossed fibers: multiple steady states and symmetry breaking
Authors:
Alban Sauret,
Alison D. Bick,
Camille Duprat,
Howard A. Stone
Abstract:
We investigate the wetting properties of the simplest element of an array of random fibers: two rigid fibers crossing with an inclination angle and in contact with a droplet of a perfectly wetting liquid. We show experimentally that the liquid adopts different morphologies when the inclination angle is increased: a column shape, a mixed morphology state where a drop lies at the end of a column, or…
▽ More
We investigate the wetting properties of the simplest element of an array of random fibers: two rigid fibers crossing with an inclination angle and in contact with a droplet of a perfectly wetting liquid. We show experimentally that the liquid adopts different morphologies when the inclination angle is increased: a column shape, a mixed morphology state where a drop lies at the end of a column, or a drop centered at the node. An analytical model is provided that predicts the wetting length as well as the presence of a non-symmetric state in the mixed morphology regime. The model also highlights a symmetry breaking at the transition between the column state and the mixed morphology. The possibility to tune the morphology of the liquid could have important implications for drying processes.
△ Less
Submitted 5 March, 2014;
originally announced March 2014.
-
Tsunami generated by a granular collapse down a rough inclined plane
Authors:
Sylvain Viroulet,
Alban Sauret,
Olivier Kimmoun
Abstract:
In this Letter, we experimentally investigate the collapse of initially dry granular media into water and the subsequent impulse waves. We systematically characterize the influence of the slope angle and the granular material on the initial amplitude of the generated leading wave and the evolution of its amplitude during the propagation. The experiments show that whereas the evolution of the leadi…
▽ More
In this Letter, we experimentally investigate the collapse of initially dry granular media into water and the subsequent impulse waves. We systematically characterize the influence of the slope angle and the granular material on the initial amplitude of the generated leading wave and the evolution of its amplitude during the propagation. The experiments show that whereas the evolution of the leading wave during the propagation is well predicted by a solution of the linearized Korteweg-de Vries equation, the generation of the wave is more complicated to describe. Our results suggest that the internal properties of the granular media and the interplay with the surrounding fluid are important parameters for the generation of waves at low velocity impacts. Moreover, the amplitude of the leading wave reaches a maximum value at large slope angle. The runout distance of the collapse is also shown to be smaller in the presence of water than under totally dry conditions. This study provides a first insight into tsunamis generated by subaerial landslides at low Froude number.
△ Less
Submitted 27 February, 2014;
originally announced February 2014.
-
Beating the jetting regime
Authors:
Alban Sauret,
Ho Cheung Shum
Abstract:
We study numerically the dynamics of jets and drops in a microcapillary co-flow device. The co-flow stream encounters different flow regimes, including drip**, jetting. Using a level-set/finite element axysimmetric numerical simulation, we study the dynamics of breakup of a jet subject to flow rate perturbations. A scaling law for the width of the unperturbed jet is presented and compared to exi…
▽ More
We study numerically the dynamics of jets and drops in a microcapillary co-flow device. The co-flow stream encounters different flow regimes, including drip**, jetting. Using a level-set/finite element axysimmetric numerical simulation, we study the dynamics of breakup of a jet subject to flow rate perturbations. A scaling law for the width of the unperturbed jet is presented and compared to existing experimental results as well as numerical measurements. Then, we show that the introduction of a sinusoidal perturbation of the inner fluid flow rate can facilitate breakup of the fluid in regimes where a jet is usually observed. Moreover, the flow rate perturbation leads to a good control over the size and the frequency of the resulting droplets. Using theoretical modelling, we provide a criterion to determine the optimal frequency to break up the jet. We also derive scaling laws to determine the volume of inner fluid encapsulated in the emulsion droplets as a function of the frequency and to estimate the distance for the jet to break up as a function of the amplitude of perturbation. These scaling laws are in good agreement with results of numerical simulations. Our work suggests a novel approach and offers guiding principles to break up liquid jets in cases where drip** is difficult to achieve.
△ Less
Submitted 5 October, 2013;
originally announced October 2013.