-
Magnetic field simulations and measurements on the mini-ICAL detector
Authors:
Honey Khindri,
B. Satyanarayana,
D. Indumathi,
V. M. Datar,
R. Shinde,
N. Dalal,
S. Prabhakar,
S. Ajith
Abstract:
The ICAL (Iron Calorimeter) is a 51 kTon magnetized detector proposed by the INO collaboration. It is designed to detect muons with energies in the 1-20 GeV range. A magnetic field of about 1.5 T in the ICAL detector will be generated by passing a DC current through suitable copper coils. This will enable it to distinguish between muons and anti-muons that will be generated from the interaction of…
▽ More
The ICAL (Iron Calorimeter) is a 51 kTon magnetized detector proposed by the INO collaboration. It is designed to detect muons with energies in the 1-20 GeV range. A magnetic field of about 1.5 T in the ICAL detector will be generated by passing a DC current through suitable copper coils. This will enable it to distinguish between muons and anti-muons that will be generated from the interaction of atmospheric muon neutrinos and anti-neutrinos with iron. This will help in resolving the open question of mass ordering in the neutrino sector. Apart from charge identification, the magnetic field will be used to reconstruct the muon momentum (direction and magnitude). Therefore it is important to know the magnetic field in the detector as accurately as possible. We present here an (indirect) measurement of the magnetic field in the 85 ton prototype mini-ICAL detector working in Madurai, Tamil Nadu, for different coil currents. A detailed 3-D finite element simulation was done for the mini-ICAL geometry using Infolytica MagNet software and the magnetic field was computed for different coil currents. This paper presents, for the first time, a comparison of the magnetic field measured in the air gaps with the simulated magnetic field, to validate the simulation using real time data. Using the simulations the magnetic field inside the iron is estimated.
△ Less
Submitted 29 November, 2023;
originally announced November 2023.
-
Design, fabrication and large scale qualification of cosmic muon veto scintillator detectors
Authors:
Mandar Saraf,
Pandi Raj Chinnappan,
Aditya Deodhar,
Mamta Jangra,
J. Krishnamoorthi,
Gobinda Majumder,
Veera Padmavathy,
K. C. Ravindran,
Raj Bhupen Shah,
Ravindra Shinde,
B. Satyanarayana
Abstract:
The INO collaboration is designing a cosmic muon veto detector (CMVD) to cover the mini-ICAL detector which is operational at the IICHEP transit campus, Madurai in South India. The aim of the CMVD is to study the feasibility of building an experiment to record rare events at a shallow depth of around 100 m, and use plastic scintillators to veto atmospheric muons from those produced by the rare int…
▽ More
The INO collaboration is designing a cosmic muon veto detector (CMVD) to cover the mini-ICAL detector which is operational at the IICHEP transit campus, Madurai in South India. The aim of the CMVD is to study the feasibility of building an experiment to record rare events at a shallow depth of around 100 m, and use plastic scintillators to veto atmospheric muons from those produced by the rare interactions within the target mass of the detector. The efficiency of such a veto detector should be better than 99.99% and false positive rate of less than $10^{-5}$.
The CMVD is being built using extruded plastic scintillator (EPS) strips to detect and tag atmospheric muons. More than 700 EPS strips are required to build the CMVD. Two EPS strips are pasted together to make a di-counter (DC) and wavelength shifting fibres are embedded inside the EPS strips to trap the scintillation light generated by a passing cosmic ray muon and transmit it as secondary photons to the Silicon Photo-Multipliers (SiPMs) mounted at the two ends of the DCs. Since the efficiency requirement of the veto detector is rather high, it is imperative to thoroughly test each and every component used for building the CMVD. A cosmic ray muon telescope has been setup using the DCs to qualify all the DCs that will be fabricated. In this paper we will discuss the details of the design and fabrication of the DCs, and the cosmic muon setup and the electronics used for their testing and the test results.
△ Less
Submitted 4 May, 2023; v1 submitted 29 January, 2023;
originally announced January 2023.
-
Mass testing of SiPMs for the CMVD at IICHEP
Authors:
Mamta Jangra,
Raj Bhupen,
Gobinda Majumder,
Kiran Gothe,
Mandar Saraf,
Nandkishor Parmar,
B. Satyanarayana,
R. R. Shinde,
Shobha K. Rao,
Suresh S Upadhya,
Vivek M Datar,
Douglas A. Glenzinski,
Alan Bross,
Anna Pla-Dalmau,
Vishnu V. Zutshi,
Robert Craig Group,
E Craig Dukes
Abstract:
A Cosmic Muon Veto Detector (CMVD) is being built around the mini-Iron Calorimeter (mini-ICAL) detector at the transit campus of the India based Neutrino Observatory, Madurai. The CMV detector will be made using extruded plastic scintillators with embedded wavelength shifting (WLS) fibres which propagate re-emitted photons of longer wavelengths to silicon photo-multipliers (SiPMs). The SiPMs detec…
▽ More
A Cosmic Muon Veto Detector (CMVD) is being built around the mini-Iron Calorimeter (mini-ICAL) detector at the transit campus of the India based Neutrino Observatory, Madurai. The CMV detector will be made using extruded plastic scintillators with embedded wavelength shifting (WLS) fibres which propagate re-emitted photons of longer wavelengths to silicon photo-multipliers (SiPMs). The SiPMs detect these scintillation photons, producing electronic signals. The design goal for the cosmic muon veto efficiency of the CMV is $>$99.99\% and fake veto rate less than 10$^{-5}$. A testing system was developed, using an LED driver, to measure the noise rate and gain of each SiPM, and thus determine its overvoltage ($V_{ov}$). This paper describes the test results and the analysed characteristics of about 3.5k SiPMs.
△ Less
Submitted 21 October, 2022; v1 submitted 24 August, 2022;
originally announced August 2022.
-
Magnetic field measurements on the mini-ICAL detector using Hall probes
Authors:
Honey,
B. Satyanarayana,
R. Shinde,
V. M. Datar,
D. Indumathi,
Ram K V Thulasi,
N. Dalal,
S. Prabhakar,
S. Ajith,
Sourabh Pathak,
Sandip Patel
Abstract:
The magnetised 51 kton Iron Calorimeter (ICAL) detector proposed to be built at INO is designed with a focus on detecting 1-20 GeV muons. The magnetic field will enable the measurement of the momentum of the $μ^-$ and $μ^+$ generated from the charge current interactions of $ν_μ$ and $\barν_μ$ separately within iron in the detector, thus permitting the determination of the neutrino mass ordering/hi…
▽ More
The magnetised 51 kton Iron Calorimeter (ICAL) detector proposed to be built at INO is designed with a focus on detecting 1-20 GeV muons. The magnetic field will enable the measurement of the momentum of the $μ^-$ and $μ^+$ generated from the charge current interactions of $ν_μ$ and $\barν_μ$ separately within iron in the detector, thus permitting the determination of the neutrino mass ordering/hierarchy, among other important goals of ICAL. Hence it is important to determine the magnetic field as accurately as possible. The mini-ICAL detector is an 85-ton prototype of ICAL, which is operational at Madurai in South India. We describe here the first measurement of the magnetic field in mini-ICAL using Hall sensor PCBs. A set-up developed to calibrate the Hall probe sensors using an electromagnet. The readout system has been designed using an Arduino Nano board for selection of channels of Hall probes mounted on the PCB and to convert the analog voltage to a digital output. The magnetic field has been measured in the small gaps (provided for the purpose) between iron plates in the top layer of mini-ICAL as well as in the air just outside the detector. A precision of better than 3% was obtained, with a sensitivity down to about 0.03 kGauss when measuring the small fringe fields outside the detector.
△ Less
Submitted 30 June, 2022;
originally announced June 2022.
-
Optimisation of Operating High Voltage of the large area Resistive Plate Chamber for ICAL experiment
Authors:
S. Pethuraj,
G. Majumder,
K. C. Ravindran,
B. Satyanarayana,
Umesh L
Abstract:
The Resistive Plate Chamber is a widely used detector in high energy physics. The operating potential of this chamber is determined by the optimisation of the efficiency and noise rate of the device. This optimisation is based on the assumption that the performance of the device over the whole surface area is uniform. The INO-ICAL experiment is going to use $\sim$ 30000 RPC of size $\sim$2\,m…
▽ More
The Resistive Plate Chamber is a widely used detector in high energy physics. The operating potential of this chamber is determined by the optimisation of the efficiency and noise rate of the device. This optimisation is based on the assumption that the performance of the device over the whole surface area is uniform. The INO-ICAL experiment is going to use $\sim$ 30000 RPC of size $\sim$2\,m$\times$2\,m. All the RPC will have to pass a minimum quality assurance criteria, but may not be able to maintain a good uniformity over the whole surface area, particularly for the whole running period of about twenty years. This paper describes the choice of the optimum operating HV for an RPC of non-uniform response.
△ Less
Submitted 4 April, 2022;
originally announced April 2022.
-
Qualification study of SiPMs on a large scale for the CMVD Experiment
Authors:
Mamta Jangra,
Raj Bhupen,
Gobinda Majumder,
Kiran Gothe,
Mandar Saraf,
Nandkishor Parmar,
B. Satyanarayana,
R. R. Shinde,
Shobha K. Rao,
Suresh S Upadhya,
Vivek M Datar,
Douglas A. Glenzinski,
Alan Bross,
Anna Pla-Dalmau,
Vishnu V. Zutshi,
Robert Craig Group,
E Craig Dukes
Abstract:
A Cosmic Muon Veto (CMV) detector using extruded plastic scintillators is being designed around the mini-Iron Calorimeter (mini-ICAL) detector at the transit campus of the India based Neutrino Observatory, Madurai for the feasibility study of shallow depth underground experiments. The scintillation signals that are produced in the plastic due to muon trajectories are absorbed by wavelength shiftin…
▽ More
A Cosmic Muon Veto (CMV) detector using extruded plastic scintillators is being designed around the mini-Iron Calorimeter (mini-ICAL) detector at the transit campus of the India based Neutrino Observatory, Madurai for the feasibility study of shallow depth underground experiments. The scintillation signals that are produced in the plastic due to muon trajectories are absorbed by wavelength shifting (WLS) fibres. The WLS fibres re-emit photons of longer wavelengths and propagate those to silicon photo-multipliers (SiPMs). The SiPMs detect these photons, producing electronic signals. The CMV detector will use more than 700 scintillators to cover the mini-ICAL detector and will require around 3000 SiPMs. The design goal for the cosmic muon veto efficiency of the CMV is >99.99%. Hence, every SiPM used in the detector needs to be tested and characterised to satisfy the design goal of CMV. A mass testing system was developed for the measurement of gain and choice of the overvoltage ($V_{ov}$) of each SiPMs using an LED driver. The $V_{ov}$ is obtained by studying the noise rate, the gain of the SiPM. This paper describes the experimental setup used to test the SiPMs characteristics along with detailed studies of those characteristics as a function of temperature.
△ Less
Submitted 31 March, 2022;
originally announced March 2022.
-
Improving Time and Position Resolution of RPC detectors using Time Over Threshold Information
Authors:
Jim M John,
S. Pethuraj,
G. Majumder,
K. C. Ravindran,
V. M. Datar,
B. Satyanarayana
Abstract:
INO-ICAL is a proposed underground particle physics experiment to study the neutrino oscillation parameters by detecting neutrinos produced in the atmospheric air showers. Iron CALorimeter (ICAL) is to have 151 layers of iron stacked vertically, with active detector elements in between the iron layers. The iron layers will be magnetized to enable the measurement of momentum and charge of the…
▽ More
INO-ICAL is a proposed underground particle physics experiment to study the neutrino oscillation parameters by detecting neutrinos produced in the atmospheric air showers. Iron CALorimeter (ICAL) is to have 151 layers of iron stacked vertically, with active detector elements in between the iron layers. The iron layers will be magnetized to enable the measurement of momentum and charge of the $μ^-$ (or $μ^+$) produced by $ν_μ$ (or $\barν_μ$) interactions. Resistive Plate Chambers (RPCs) have been chosen as the active detector elements due to their large area coverage, uncompromised sensitivity, consistent performance for decades, as well as cost effectiveness. The major factors that decide the physics potential of the ICAL experiment are efficiency, position resolution and time resolution of the large area RPCs. A prototype detector called miniICAL (with 11 iron layers) was commissioned to understand the engineering challenges in building the large scale magnet and its ancillary systems, and also to study the performance of the RPC detectors and readout electronics developed by the INO collaboration. As part of the performance study of the RPC detectors, an attempt is made to improve the position and time resolution of them. Even a small improvement in the position and time resolution will help to improve the measurements of momentum and directionality of the neutrinos in ICAL. The Time-over-Threshold (ToT) of the RPC pulses (signals) is recorded by the readout electronics. ToT is a measure of the pulse width and consequently the amplitude. This information is used to improve the time and position resolution of the RPCs and consequently INO physics potential.
△ Less
Submitted 15 November, 2023; v1 submitted 23 January, 2022;
originally announced January 2022.
-
Characterization of Silicon-Photomultipliers for a Cosmic Muon Veto detector
Authors:
Mamta Jangra,
Gobinda Majumder,
Mandar Saraf,
B. Satyanarayana,
R. R. Shinde,
Suresh S Upadhya,
Vivek M Datar,
Douglas A. Glenzinski,
Alan Bross,
Anna Pla-Dalmau,
Vishnu V. Zutshi,
Robert Craig Group,
E Craig Dukes
Abstract:
A Cosmic Muon Veto (CMV) detector using extruded scintillators is being designed around the mini-Iron Calorimeter detector at the transit campus of the India-based Neutrino Observatory at Madurai for measuring its efficiency at shallow depth underground experiments. The scintillation signal is transmitted through a Wavelength Shifting (WLS) fibre and readout by Hamamatsu Silicon-Photomultipliers (…
▽ More
A Cosmic Muon Veto (CMV) detector using extruded scintillators is being designed around the mini-Iron Calorimeter detector at the transit campus of the India-based Neutrino Observatory at Madurai for measuring its efficiency at shallow depth underground experiments. The scintillation signal is transmitted through a Wavelength Shifting (WLS) fibre and readout by Hamamatsu Silicon-Photomultipliers (SiPMs). A Light Emitting Diode (LED) system is included on the front-end readout for in-situ calibration of the gain of each SiPM. A characterization system was developed for the measurement of gain and choice of the overvoltage (Vov) of SiPMs using LED as well as a cosmic muon telescope. The Vov is obtained by studying the noise rate, the gain of the SiPM, and the muon detection efficiency. In case of any malfunction of the LED system during the operation, the SiPM can also be calibrated with the noise data as well as using radioactive sources. This paper describes the basic characteristics of the SiPM and the comparison of the calibration results using all three methods, as well as the Vov of the SiPMs and muon selection criteria for the veto detector.
△ Less
Submitted 19 August, 2021; v1 submitted 12 August, 2021;
originally announced August 2021.
-
Study of Particle Multiplicity of Cosmic Ray Events using 2m$\times$2m Resistive Plate Chamber Stack at IICHEP-Madurai
Authors:
Suryanarayan Mondal,
V. M. Datar,
Gobinda Majumder,
N. K. Mondal,
S. Pethuraj,
K. C. Ravindran,
B. Satyanarayana
Abstract:
An experimental setup consisting of 12 layers of glass Resistive Plate Chambers (RPCs) of size 2\,m\,$\times$\,2\,m has been built at IICHEP-Madurai (\ang{9;56;14.5}\,N \ang{78;00;47.9}\,E, on the surface) to study the long term performance and stability of RPCs produced on large scale in Indian industry. This setup has been collecting data triggered by the passage of charged particles. The measur…
▽ More
An experimental setup consisting of 12 layers of glass Resistive Plate Chambers (RPCs) of size 2\,m\,$\times$\,2\,m has been built at IICHEP-Madurai (\ang{9;56;14.5}\,N \ang{78;00;47.9}\,E, on the surface) to study the long term performance and stability of RPCs produced on large scale in Indian industry. This setup has been collecting data triggered by the passage of charged particles. The measurement of the multiplicity of charged particles due to cosmic ray interactions are presented here. Finally, the results are compared with different hadronic models of the CORSIKA simulation.
△ Less
Submitted 11 December, 2020; v1 submitted 13 August, 2019;
originally announced August 2019.
-
Development and characterization of six-gap glass MRPCs and feasibility study of a PET device
Authors:
M. Nizam,
B. Satyanarayana,
R. R. Shinde,
G. Majumder
Abstract:
The Multigap Resistive Plate Chambers (MRPCs) provide excellent timing as well as position resolutions at relatively low cost. Therefore, they can be used in medical imaging applications such as PET where precise timing is a crucial parameter of measurement. We have designed and fabricated several six-gap glass MRPCs and extensively studied their performance. In this paper, we describe the fabrica…
▽ More
The Multigap Resistive Plate Chambers (MRPCs) provide excellent timing as well as position resolutions at relatively low cost. Therefore, they can be used in medical imaging applications such as PET where precise timing is a crucial parameter of measurement. We have designed and fabricated several six-gap glass MRPCs and extensively studied their performance. In this paper, we describe the fabrication and characterization of the detector, the electronics and the data acquisition system of the setup. We present here the result of our Time Of Flight (TOF) experiment using a radioactive source Na-22 hence to demonstrate their potential applications in medical imaging. We also present the Geant4 based simulation results on the efficiency of our detector as a function of the number of gaps and thickness of the converter material.
△ Less
Submitted 22 July, 2019;
originally announced July 2019.
-
Measurement of azimuthal dependent muon flux by 2\,m\,$\times$\,2\,m RPC stack at IICHEP-Madurai
Authors:
S. Pethuraj,
G. Majumder,
V. M. Datar,
N. K. Mondal,
K. C. Ravindran,
B. Satyanarayana
Abstract:
The proposed 50 \,kton\, INO-ICAL experiment is an upcoming underground high energy physics experiment planned to be commissioned at Bodi hills near Theni, India ($9^{\circ}57'N$, $77^{\circ}16'E$) to study various properties of neutrino oscillations using atmospheric neutrinos produced by extensive air shower phenomenon. The resistive plate chamber has been chosen as the active detector element f…
▽ More
The proposed 50 \,kton\, INO-ICAL experiment is an upcoming underground high energy physics experiment planned to be commissioned at Bodi hills near Theni, India ($9^{\circ}57'N$, $77^{\circ}16'E$) to study various properties of neutrino oscillations using atmospheric neutrinos produced by extensive air shower phenomenon. The resistive plate chamber has been chosen as the active detector element for the proposed INO-ICAL. An experimental setup consisting a stack of 12 layers of glass resistive plate chambers each with a size of $\sim$2\,m$\times$2\,m has been built at IICHEP, Madurai to study the performance and long-term stability of the resistive plate chambers(RPCs) commercially produced in large quantities by the Indian industries as well as its electronics for the front-end and subsequent signal processing. In this study, the azimuthal dependence of muon flux at various zenith angles at Madurai (9$^{\circ}$56'N, 78$^{\circ}$00'E and at an altitude of 160\,m above mean sea level) has been presented along with the comparison of Monte Carlo from CORSIKA and HONDA predictions.
△ Less
Submitted 11 March, 2020; v1 submitted 1 May, 2019;
originally announced May 2019.
-
Leak Test of Resistive Plate Chamber Gap by Monitoring Absolute Pressure
Authors:
Suryanarayan Mondal,
V. M. Datar,
Gobinda Majumder,
N. K. Mondal,
K. C. Ravindran,
B. Satyanarayana
Abstract:
The India-based Neutrino Observatory Project (INO) is a proposed underground high energy physics experiment at Theni, India to study the neutrino oscillation parameters using atmospheric neutrinos. The 50 kton magnetised INO-ICAL detector will require approximately 30,000 of 2m$\times$2m Resistive Plate Chambers (RPC) as sensitive detectors and proposed to operate for about 20 years. For success o…
▽ More
The India-based Neutrino Observatory Project (INO) is a proposed underground high energy physics experiment at Theni, India to study the neutrino oscillation parameters using atmospheric neutrinos. The 50 kton magnetised INO-ICAL detector will require approximately 30,000 of 2m$\times$2m Resistive Plate Chambers (RPC) as sensitive detectors and proposed to operate for about 20 years. For success of the experiment, each of the RPCs has to function without showing any significant aging during the period of operation. Hence, various tests including a proper leak test are performed during and after production. The methods of leak rate calculation using conventional manometer are valid only when both the volume of the test subject and ambient pressure are kept constant. But both these quantities for a RPC gas gap depend widely on the ambient pressure and temperature. A proper quantitative estimation of the leak rate cannot be acquired from such pressure measurements. By monitoring the absolute pressures, both outside and inside of an RPC, along with the temperature, its leakage rate can be estimated. During the test period, the supporting button spacers inside an RPC may get detached due to manufacturing defect. This effect also needs to be detected.
△ Less
Submitted 17 April, 2019; v1 submitted 1 December, 2018;
originally announced December 2018.
-
A compact cosmic muon veto detector and possible use with the Iron Calorimeter detector for neutrinos
Authors:
Neha Panchal,
S. Mohanraj,
A. Kumar,
T. Dey,
G. Majumder,
R. Shinde,
P. Verma,
B. Satyanarayana,
V. M. Datar
Abstract:
The motivation for a cosmic muon veto (CMV) detector is to explore the possibility of locating the proposed large Iron Calorimeter (ICAL) detector at the India based Neutrino Observatory (INO) at a shallow depth. An initial effort in that direction, through the assembly and testing of a $\sim$ 1 m $\times$ 1 m $\times$ 0.3 m plastic scintillator based detector, is described. The plan for making a…
▽ More
The motivation for a cosmic muon veto (CMV) detector is to explore the possibility of locating the proposed large Iron Calorimeter (ICAL) detector at the India based Neutrino Observatory (INO) at a shallow depth. An initial effort in that direction, through the assembly and testing of a $\sim$ 1 m $\times$ 1 m $\times$ 0.3 m plastic scintillator based detector, is described. The plan for making a CMV detector for a smaller prototype mini-ICAL is also outlined.
△ Less
Submitted 27 February, 2019; v1 submitted 29 August, 2017;
originally announced August 2017.
-
Measurement of Cosmic Muon angular distribution and vertical integrated flux by 2m$\times$2m RPC stack at IICHEP-Madurai
Authors:
S. Pethuraj,
V. M. Datar,
G. Majumder,
N. K. Mondal,
K. C. Ravindran,
B. Satyanarayana
Abstract:
The 50 \,kton\, INO-ICAL is a proposed underground high energy physics experiment at Theni, India ($9^{\circ}57'N$, $77^{\circ}16'E$) to study the neutrino oscillation parameters using atmospheric neutrinos. The Resistive Plate Chamber (RPC) has been chosen as the active detector element for the ICAL detector. An experimental setup consisting of 12 layers of glass RPCs of size 2\,m\,$\times$\,2\,m…
▽ More
The 50 \,kton\, INO-ICAL is a proposed underground high energy physics experiment at Theni, India ($9^{\circ}57'N$, $77^{\circ}16'E$) to study the neutrino oscillation parameters using atmospheric neutrinos. The Resistive Plate Chamber (RPC) has been chosen as the active detector element for the ICAL detector. An experimental setup consisting of 12 layers of glass RPCs of size 2\,m\,$\times$\,2\,m has been built at IICHEP, Madurai to study the long term stability and performance of RPCs which are produced on a large scale in Indian industry. In this paper, the studies on the performance of RPCs are presented along with the angular distribution of muons at Madurai ($9^{\circ}56'N,78^{\circ}00'E$ and Altitude $\approx$\,160\,m from sea level).
△ Less
Submitted 3 June, 2017;
originally announced June 2017.
-
Effect of electrical properties of glass electrodes on the performance of RPC detectors for the INO-ICAL experiment
Authors:
K. Raveendrababu,
P. K. Behera,
B. Satyanarayana
Abstract:
The India-based Neutrino Observatory (INO) collaboration has chosen glass Resistive Plate Chambers (RPCs) as the active detector elements for the Iron Calorimeter (ICAL) experiment. In the present work, we study the electrical properties such as bulk resistivity and relative permittivity of the glasses from two different manufacturers and compared the performances of RPCs built using these glasses…
▽ More
The India-based Neutrino Observatory (INO) collaboration has chosen glass Resistive Plate Chambers (RPCs) as the active detector elements for the Iron Calorimeter (ICAL) experiment. In the present work, we study the electrical properties such as bulk resistivity and relative permittivity of the glasses from two different manufacturers and compared the performances of RPCs built using these glasses. We conclude that the glass electrodes with larger bulk resistivy and permittivity are better suited for manufacturing RPCs for the ICAL experiment, as these detectors could be operated at lower bias currents and voltages, and produce better time resolutions compared to those built with glass electrodes of smaller bulk resistivity and permittivity.
△ Less
Submitted 15 August, 2016;
originally announced August 2016.
-
Effect of water vapor on the performance of glass RPCs in avalanche mode operation
Authors:
K. Raveendrababu,
P. K. Behera,
B. Satyanarayana,
S. Mukhopadhayay,
N. Majumdar
Abstract:
We studied the effect of water vapor on the performance of glass Resistive Plate Chambers (RPCs) in the avalanche mode operation. Controlled and calibrated amount of water vapor was added to the RPC gas mixture that has C$_2$H$_2$F$_4$ as the major component. The deterioration in the performance of RPC was observed while operating with wet gas and recovered after switching to standard gas.
We studied the effect of water vapor on the performance of glass Resistive Plate Chambers (RPCs) in the avalanche mode operation. Controlled and calibrated amount of water vapor was added to the RPC gas mixture that has C$_2$H$_2$F$_4$ as the major component. The deterioration in the performance of RPC was observed while operating with wet gas and recovered after switching to standard gas.
△ Less
Submitted 6 May, 2016;
originally announced May 2016.
-
Study of glass properties as electrode for RPC
Authors:
K. Raveendrababu,
P. K. Behera,
B. Satyanarayana,
Jafar Sadiq
Abstract:
Operation and performance of the Resistive Plate Chambers (RPCs) mostly depend on the quality and characteristics of the electrode materials. The India-based Neutrino Observatory collaboration has chosen glass RPCs as the active detector elements for its Iron Calorimeter detector and is going to deploy RPCs in an unprecedented scale. Therefore, it is imperative that we study the electrode material…
▽ More
Operation and performance of the Resistive Plate Chambers (RPCs) mostly depend on the quality and characteristics of the electrode materials. The India-based Neutrino Observatory collaboration has chosen glass RPCs as the active detector elements for its Iron Calorimeter detector and is going to deploy RPCs in an unprecedented scale. Therefore, it is imperative that we study the electrode material aspects in detail. We report here, systematic characterization studies on the glasses from two manufacturers. RPC detectors were built using these glasses and performances of the same were compared with their material properties.
△ Less
Submitted 2 May, 2016;
originally announced May 2016.
-
Design, development and performance study of six-gap glass MRPC detectors
Authors:
Moon Moon Devi,
Naba K. Mondal,
B. Satyanarayana,
R. R. Shinde
Abstract:
The Multigap Resistive Plate Chambers (MRPCs) are gas ionization detectors with multiple gas sub-gaps made of resistive electrodes. The high voltage (HV) is applied on the outer surfaces of outermost resistive plates only, while the interior plates are left electrically floating. The presence of multiple narrow sub--gaps with high electric field results in faster signals on the outer electrodes, t…
▽ More
The Multigap Resistive Plate Chambers (MRPCs) are gas ionization detectors with multiple gas sub-gaps made of resistive electrodes. The high voltage (HV) is applied on the outer surfaces of outermost resistive plates only, while the interior plates are left electrically floating. The presence of multiple narrow sub--gaps with high electric field results in faster signals on the outer electrodes, thus improving the detector's time resolution. Due to their excellent performance and relatively low cost, the MRPC detector has found potential application in Time-of-Flight (TOF) systems. Here we present the design, fabrication, optimization of the operating parameters such as the HV, the gas mixture composition, and, performance of six--gap glass MRPC detectors of area 27cm $\times$ 27 cm, which are developed in order to find application as trigger detectors, in TOF measurement etc. The design has been optimized with unique spacers and blockers to ensure a proper gas flow through the narrow sub-gaps, which are 250 $μ$m wide. The gas mixture consisting of R134A, Isobutane and SF$_{6}$, and the fraction of each constituting gases has been optimized after studying the MRPC performance for a set of different concentrations. The counting efficiency of the MRPC is about 95% at $17.9$ kV. At the same operating voltage, the time resolution, after correcting for the walk effect, is found to be about $219$ ps.
△ Less
Submitted 15 December, 2016; v1 submitted 29 September, 2015;
originally announced September 2015.
-
Physics Potential of the ICAL detector at the India-based Neutrino Observatory (INO)
Authors:
The ICAL Collaboration,
Shakeel Ahmed,
M. Sajjad Athar,
Rashid Hasan,
Mohammad Salim,
S. K. Singh,
S. S. R. Inbanathan,
Venktesh Singh,
V. S. Subrahmanyam,
Shiba Prasad Behera,
Vinay B. Chandratre,
Nitali Dash,
Vivek M. Datar,
V. K. S. Kashyap,
Ajit K. Mohanty,
Lalit M. Pant,
Animesh Chatterjee,
Sandhya Choubey,
Raj Gandhi,
Anushree Ghosh,
Deepak Tiwari,
Ali Ajmi,
S. Uma Sankar,
Prafulla Behera,
Aleena Chacko
, et al. (67 additional authors not shown)
Abstract:
The upcoming 50 kt magnetized iron calorimeter (ICAL) detector at the India-based Neutrino Observatory (INO) is designed to study the atmospheric neutrinos and antineutrinos separately over a wide range of energies and path lengths. The primary focus of this experiment is to explore the Earth matter effects by observing the energy and zenith angle dependence of the atmospheric neutrinos in the mul…
▽ More
The upcoming 50 kt magnetized iron calorimeter (ICAL) detector at the India-based Neutrino Observatory (INO) is designed to study the atmospheric neutrinos and antineutrinos separately over a wide range of energies and path lengths. The primary focus of this experiment is to explore the Earth matter effects by observing the energy and zenith angle dependence of the atmospheric neutrinos in the multi-GeV range. This study will be crucial to address some of the outstanding issues in neutrino oscillation physics, including the fundamental issue of neutrino mass hierarchy. In this document, we present the physics potential of the detector as obtained from realistic detector simulations. We describe the simulation framework, the neutrino interactions in the detector, and the expected response of the detector to particles traversing it. The ICAL detector can determine the energy and direction of the muons to a high precision, and in addition, its sensitivity to multi-GeV hadrons increases its physics reach substantially. Its charge identification capability, and hence its ability to distinguish neutrinos from antineutrinos, makes it an efficient detector for determining the neutrino mass hierarchy. In this report, we outline the analyses carried out for the determination of neutrino mass hierarchy and precision measurements of atmospheric neutrino mixing parameters at ICAL, and give the expected physics reach of the detector with 10 years of runtime. We also explore the potential of ICAL for probing new physics scenarios like CPT violation and the presence of magnetic monopoles.
△ Less
Submitted 9 May, 2017; v1 submitted 27 May, 2015;
originally announced May 2015.
