-
NanoNewton electrostatic force actuators for femtoNewton-sensitive measurements: system performance test in the LISA Pathfinder mission
Authors:
M Armano,
H Audley,
J Baird,
M Bassan,
P Binetruy,
M Born,
D Bortoluzzi,
E Castelli,
A Cavalleri,
A Cesarini,
V Chiavegato,
A M Cruise,
D Dal Bosco,
K Danzmann,
M De Deus Silva,
R De Rosa,
L Di Fiore,
I Diepholz,
G Dixon,
R Dolesi,
L Ferraioli V Ferroni,
E D Fitzsimons,
M Freschi,
L Gesa,
D Giardini
, et al. (65 additional authors not shown)
Abstract:
Electrostatic force actuation is a key component of the system of geodesic reference test masses (TM) for the LISA orbiting gravitational wave observatory and in particular for performance at low frequencies, below 1 mHz, where the observatory sensitivity is limited by stray force noise. The system needs to apply forces of order 10$^{-9}$ N while limiting fluctuations in the measurement band to le…
▽ More
Electrostatic force actuation is a key component of the system of geodesic reference test masses (TM) for the LISA orbiting gravitational wave observatory and in particular for performance at low frequencies, below 1 mHz, where the observatory sensitivity is limited by stray force noise. The system needs to apply forces of order 10$^{-9}$ N while limiting fluctuations in the measurement band to levels approaching 10$^{-15}$ N/Hz$^{1/2}$. We present here the LISA actuation system design, based on audio-frequency voltage carrier signals, and results of its in-flight performance test with the LISA Pathfinder test mission. In LISA, TM force actuation is used to align the otherwise free-falling TM to the spacecraft-mounted optical metrology system, without any forcing along the critical gravitational wave-sensitive interferometry axes. In LISA Pathfinder, on the other hand, the actuation was used also to stabilize the TM along the critical $x$ axis joining the two TM, with the commanded actuation force entering directly into the mission's main differential acceleration science observable. The mission allowed demonstration of the full compatibility of the electrostatic actuation system with the LISA observatory requirements, including dedicated measurement campaigns to amplify, isolate, and quantify the two main force noise contributions from the actuation system, from actuator gain noise and from low frequency ``in band'' voltage fluctuations. These campaigns have shown actuation force noise to be a relevant, but not dominant, noise source in LISA Pathfinder and have allowed performance projections for the conditions expected in the LISA mission.
△ Less
Submitted 30 December, 2023;
originally announced January 2024.
-
Calibration of the IXPE focal plane X-ray polarimeters to polarized radiation
Authors:
Alessandro Di Marco,
Sergio Fabiani,
Fabio La Monaca,
Fabio Muleri,
John Rankin,
Paolo Soffitta,
Fei Xie,
Fabrizio Amici,
Primo attinà,
Matteo Bachetti,
Luca Baldini,
Mattia Barbanera,
Wayne Baumgartner,
Ronaldo Bellazzini,
Fabio Borotto,
Alessandro Brez,
Daniele Brienza,
Ciro Caporale,
Claudia Cardelli,
Rita Carpentiero,
Simone Castellano,
Marco Castronuovo,
Luca Cavalli,
Elisabetta Cavazzuti,
Marco Ceccanti
, et al. (58 additional authors not shown)
Abstract:
IXPE (Imaging X-ray Polarimetry Explorer) is a NASA Small Explorer mission -- in partnership with the Italian Space Agency (ASI) -- dedicated to X-ray polarimetry in the 2--8 keV energy band. The IXPE telescope comprises three grazing incidence mirror modules coupled to three detector units hosting each one a Gas Pixel Detector (GPD), a gas detector that allows measuring the polarization degree by…
▽ More
IXPE (Imaging X-ray Polarimetry Explorer) is a NASA Small Explorer mission -- in partnership with the Italian Space Agency (ASI) -- dedicated to X-ray polarimetry in the 2--8 keV energy band. The IXPE telescope comprises three grazing incidence mirror modules coupled to three detector units hosting each one a Gas Pixel Detector (GPD), a gas detector that allows measuring the polarization degree by using the photoelectric effect. A wide and accurate ground calibration was carried out on the IXPE Detector Units (DUs) at INAF-IAPS, in Italy, where a dedicated facility was set-up at this aim. In this paper, we present the results obtained from this calibration campaign to study the IXPE focal plane detector response to polarized radiation. In particular, we report on the modulation factor, which is the main parameter to estimate the sensitivity of a polarimeter.
△ Less
Submitted 15 June, 2022;
originally announced June 2022.
-
The Imaging X-Ray Polarimetry Explorer (IXPE): Pre-Launch
Authors:
Martin C. Weisskopf,
Paolo Soffitta,
Luca Baldini,
Brian D. Ramsey,
Stephen L. O'Dell,
Roger W. Romani,
Giorgio Matt,
William D. Deininger,
Wayne H. Baumgartner,
Ronaldo Bellazzini,
Enrico Costa,
Jeffery J. Kolodziejczak,
Luca Latronico,
Herman L. Marshall,
Fabio Muleri,
Stephen D. Bongiorno,
Allyn Tennant,
Niccolo Bucciantini,
Michal Dovciak,
Frederic Marin,
Alan Marscher,
Juri Poutanen,
Pat Slane,
Roberto Turolla,
William Kalinowski
, et al. (133 additional authors not shown)
Abstract:
Scheduled to launch in late 2021, the Imaging X-ray Polarimetry Explorer (IXPE) is a NASA Small Explorer Mission in collaboration with the Italian Space Agency (ASI). The mission will open a new window of investigation - imaging X-ray polarimetry. The observatory features 3 identical telescopes each consisting of a mirror module assembly with a polarization-sensitive imaging X-ray detector at the…
▽ More
Scheduled to launch in late 2021, the Imaging X-ray Polarimetry Explorer (IXPE) is a NASA Small Explorer Mission in collaboration with the Italian Space Agency (ASI). The mission will open a new window of investigation - imaging X-ray polarimetry. The observatory features 3 identical telescopes each consisting of a mirror module assembly with a polarization-sensitive imaging X-ray detector at the focus. A coilable boom, deployed on orbit, provides the necessary 4-m focal length. The observatory utilizes a 3-axis-stabilized spacecraft which provides services such as power, attitude determination and control, commanding, and telemetry to the ground. During its 2-year baseline mission, IXPE will conduct precise polarimetry for samples of multiple categories of X-ray sources, with follow-on observations of selected targets.
△ Less
Submitted 21 December, 2021; v1 submitted 2 December, 2021;
originally announced December 2021.
-
The Instrument of the Imaging X-ray Polarimetry Explorer
Authors:
Paolo Soffitta,
Luca Baldini,
Ronaldo Bellazzini,
Enrico Costa,
Luca Latronico,
Fabio Muleri,
Ettore Del Monte,
Sergio Fabiani,
Massimo Minuti,
Michele Pinchera,
Carmelo Sgrò,
Gloria Spandre,
Alessio Trois,
Fabrizio Amici,
Hans Andersson,
Primo Attinà,
Matteo Bachetti,
Mattia Barbanera,
Fabio Borotto,
Alessandro Brez,
Daniele Brienza,
Ciro Caporale,
Claudia Cardelli,
Rita Carpentiero,
Simone Castellano
, et al. (56 additional authors not shown)
Abstract:
While X-ray Spectroscopy, Timing and Imaging have improved verymuch since 1962, when the first astronomical non-solar source was discovered, especially with the launch of Newton/X-ray Multi-Mirror Mission, Rossi/X-ray Timing Explorer and Chandra/Advanced X-ray Astrophysics Facility, the progress of X-ray polarimetry has been meager. This is in part due to the lack of sensitive polarization detecto…
▽ More
While X-ray Spectroscopy, Timing and Imaging have improved verymuch since 1962, when the first astronomical non-solar source was discovered, especially with the launch of Newton/X-ray Multi-Mirror Mission, Rossi/X-ray Timing Explorer and Chandra/Advanced X-ray Astrophysics Facility, the progress of X-ray polarimetry has been meager. This is in part due to the lack of sensitive polarization detectors, in part due to the fate of approved missions and in part because the celestial X-ray sources appeared less polarized than expected. Only one positive measurement has been available until now. Indeed the eight Orbiting Solar Observatory measured the polarization of the Crab nebula in the 70s.
The advent of techniques of microelectronics allowed for designing a detector based on the photoelectric effect in gas in an energy range where the optics are efficient in focusing X-rays. Herewe describe the Instrument, which is the major contribution of the Italian collaboration to the SmallExplorer mission called IXPE, the Imaging X-ray Polarimetry Explorer, which will be flown in late 2021. The instrument, is composed of three Detector Units, based on this technique, and a Detector Service Unit. Three Mirror Modules provided by Marshall Space Flight Center focus X-rays onto the detectors. In the following we will show the technological choices, their scientific motivation and the results from the calibration of the Instrument.
IXPE will perform imaging, timing and energy resolved polarimetry in the 2-8 keV energy band opening this window of X-ray astronomy to tens of celestial sources of almost all classes.
△ Less
Submitted 31 July, 2021;
originally announced August 2021.
-
Design, Construction, and Test of the Gas Pixel Detectors for the IXPE Mission
Authors:
L. Baldini,
M. Barbanera,
R. Bellazzini,
R. Bonino,
F. Borotto,
A. Brez,
C. Caporale,
C. Cardelli,
S. Castellano,
M. Ceccanti,
S. Citraro,
N. Di Lalla,
L. Latronico,
L. Lucchesi,
C. Magazzù,
G. Magazzù,
S. Maldera,
A. Manfreda,
M. Marengo,
A. Marrocchesi,
P. Mereu,
M. Minuti,
F. Mosti,
H. Nasimi,
A. Nuti
, et al. (69 additional authors not shown)
Abstract:
Due to be launched in late 2021, the Imaging X-Ray Polarimetry Explorer (IXPE) is a NASA Small Explorer mission designed to perform polarization measurements in the 2-8 keV band, complemented with imaging, spectroscopy and timing capabilities. At the heart of the focal plane is a set of three polarization-sensitive Gas Pixel Detectors (GPD), each based on a custom ASIC acting as a charge-collectin…
▽ More
Due to be launched in late 2021, the Imaging X-Ray Polarimetry Explorer (IXPE) is a NASA Small Explorer mission designed to perform polarization measurements in the 2-8 keV band, complemented with imaging, spectroscopy and timing capabilities. At the heart of the focal plane is a set of three polarization-sensitive Gas Pixel Detectors (GPD), each based on a custom ASIC acting as a charge-collecting anode. In this paper we shall review the design, manufacturing, and test of the IXPE focal-plane detectors, with particular emphasis on the connection between the science drivers, the performance metrics and the operational aspects. We shall present a thorough characterization of the GPDs in terms of effective noise, trigger efficiency, dead time, uniformity of response, and spectral and polarimetric performance. In addition, we shall discuss in detail a number of instrumental effects that are relevant for high-level science analysis -- particularly as far as the response to unpolarized radiation and the stability in time are concerned.
△ Less
Submitted 12 July, 2021;
originally announced July 2021.
-
The X/Gamma-ray Imaging Spectrometer (XGIS) on-board THESEUS: design, main characteristics, and concept of operation
Authors:
Claudio Labanti,
Lorenzo Amati,
Filippo Frontera,
Sandro Mereghetti,
José Luis Gasent-Blesa,
Christoph Tenzer,
Piotr Orleanski,
Irfan Kuvvetli,
Riccardo Campana,
Fabio Fuschino,
Luca Terenzi,
Enrico Virgilli,
Gianluca Morgante,
Mauro Orlandini,
Reginald C. Butler,
John B. Stephen,
Natalia Auricchio,
Adriano De Rosa,
Vanni Da Ronco,
Federico Evangelisti,
Michele Melchiorri,
Stefano Squerzanti,
Mauro Fiorini,
Giuseppe Bertuccio,
Filippo Mele
, et al. (36 additional authors not shown)
Abstract:
THESEUS is one of the three missions selected by ESA as fifth medium class mission (M5) candidates in its Cosmic Vision science program, currently under assessment in a phase A study with a planned launch date in 2032. THESEUS is designed to carry on-board two wide and deep sky monitoring instruments for X/gamma-ray transients detection: a wide-field soft X-ray monitor with imaging capability (Sof…
▽ More
THESEUS is one of the three missions selected by ESA as fifth medium class mission (M5) candidates in its Cosmic Vision science program, currently under assessment in a phase A study with a planned launch date in 2032. THESEUS is designed to carry on-board two wide and deep sky monitoring instruments for X/gamma-ray transients detection: a wide-field soft X-ray monitor with imaging capability (Soft X-ray Imager, SXI, 0.3 - 5 keV), a hard X-ray, partially-imaging spectroscopic instrument (X and Gamma Imaging Spectrometer, XGIS, 2 keV - 10 MeV), and an optical/near-IR telescope with both imaging and spectroscopic capability (InfraRed Telescope, IRT, 0.7 - 1.8 $μ$m). The spacecraft will be capable of performing fast repointing of the IRT to the error region provided by the monitors, thus allowing it to detect and localize the transient sources down to a few arcsec accuracy, for immediate identification and redshift determination. The prime goal of the XGIS will be to detect transient sources, with monitoring timescales down to milliseconds, both independently of, or following, up SXI detections, and identify the sources performing localisation at < 15 arcmin and characterize them over a broad energy band, thus providing also unique clues to their emission physics. The XGIS system consists of two independent but identical coded mask cameras, arranged to cover 2 steradians . The XGIS will exploit an innovative technology coupling Silicon Drift Detectors (SDD) with crystal scintillator bars and a very low-noise distributed front-end electronics (ORION ASICs), which will produce a position sensitive detection plane, with a large effective area over a huge energy band (from soft X-rays to soft gamma-rays) with timing resolution down to a few $μ$s.Here is presented an overview of the XGIS instrument design, its configuration, and capabilities.
△ Less
Submitted 17 February, 2021;
originally announced February 2021.
-
The XGIS instrument on-board THESEUS: the detection plane and on-board electronics
Authors:
Fabio Fuschino,
Riccardo Campana,
Claudio Labanti,
Lorenzo Amati,
Enrico Virgilli,
Luca Terenzi,
Pierluigi Bellutti,
Giuseppe Bertuccio,
Giacomo Borghi,
Francesco Ficorella,
Massimo Gandola,
Marco Grassi,
Giovanni La Rosa,
Paolo Lorenzi,
Piero Malcovati,
Filippo Mele,
Piotr Orleański,
Antonino Picciotto,
Alexandre Rachevski,
Irina Rashevskaya,
Andrea Santangelo,
Paolo Sarra,
Giuseppe Sottile,
Christoph Tenzer,
Andrea Vacchi
, et al. (10 additional authors not shown)
Abstract:
The X and Gamma Imaging Spectrometer instrument on-board the THESEUS mission (selected by ESA in the framework of the Cosmic Vision M5 launch opportunity, currently in phase A) is based on a detection plane composed of several thousands of single active elements. Each element comprises a 4.5x4.5x30 mm 3 CsI(Tl) scintillator bar, optically coupled at both ends to Silicon Drift Detectors (SDDs). The…
▽ More
The X and Gamma Imaging Spectrometer instrument on-board the THESEUS mission (selected by ESA in the framework of the Cosmic Vision M5 launch opportunity, currently in phase A) is based on a detection plane composed of several thousands of single active elements. Each element comprises a 4.5x4.5x30 mm 3 CsI(Tl) scintillator bar, optically coupled at both ends to Silicon Drift Detectors (SDDs). The SDDs acts both as photodetectors for the scintillation light and as direct X-ray sensors. In this paper the design of the XGIS detection plane is reviewed, outlining the strategic choices in terms of modularity and redundancy of the system. Results on detector-electronics prototypes are also described. Moreover, the design and development of the low-noise front-end electronics is presented, emphasizing the innovative architectural design based on custom-designed Application-Specific Integrated Circuits (ASICs).
△ Less
Submitted 17 February, 2021;
originally announced February 2021.
-
In-flight calibration system of Imaging X-ray Polarimetry Explorer
Authors:
Riccardo Ferrazzoli,
Fabio Muleri,
Carlo Lefevre,
Alfredo Morbidini,
Fabrizio Amici,
Daniele Brienza,
Enrico Costa,
Ettore Del Monte,
Alessandro Di Marco,
Giuseppe Di Persio,
Immacolata Donnarumma,
Sergio Fabiani,
Fabio La Monaca,
Pasqualino Loffredo,
Luca Maiolo,
Francesco Maita,
Raffaele Piazzolla,
Brian Ramsey,
John Rankin,
Ajay Ratheesh,
Alda Rubini,
Paolo Sarra,
Paolo Soffitta,
Antonino Tobia,
Fei Xie
Abstract:
The NASA/ASI Imaging X-ray Polarimetry Explorer, which will be launched in 2021, will be the first instrument to perform spatially resolved X-ray polarimetry on several astronomical sources in the 2-8 keV energy band. These measurements are made possible owing to the use of a gas pixel detector (GPD) at the focus of three X-ray telescopes. The GPD allows simultaneous measurements of the interactio…
▽ More
The NASA/ASI Imaging X-ray Polarimetry Explorer, which will be launched in 2021, will be the first instrument to perform spatially resolved X-ray polarimetry on several astronomical sources in the 2-8 keV energy band. These measurements are made possible owing to the use of a gas pixel detector (GPD) at the focus of three X-ray telescopes. The GPD allows simultaneous measurements of the interaction point, energy, arrival time, and polarization angle of detected X-ray photons. The increase in sensitivity, achieved 40 years ago, for imaging and spectroscopy with the Einstein satellite will thus be extended to X-ray polarimetry for the first time. The characteristics of gas multiplication detectors are subject to changes over time. Because the GPD is a novel instrument, it is particularly important to verify its performance and stability during its mission lifetime. For this purpose, the spacecraft hosts a filter and calibration set (FCS), which includes both polarized and unpolarized calibration sources for performing in-flight calibration of the instruments. In this study, we present the design of the flight models of the FCS and the first measurements obtained using silicon drift detectors and CCD cameras, as well as those obtained in thermal vacuum with the flight units of the GPD. We show that the calibration sources successfully assess and verify the functionality of the GPD and validate its scientific results in orbit; this improves our knowledge of the behavior of these detectors in X-ray polarimetry.
△ Less
Submitted 27 October, 2020;
originally announced October 2020.
-
Metis: the Solar Orbiter visible light and ultraviolet coronal imager
Authors:
Ester Antonucci,
Marco Romoli,
Vincenzo Andretta,
Silvano Fineschi,
Petr Heinzel,
J. Daniel Moses,
Giampiero Naletto,
Gianalfredo Nicolini,
Daniele Spadaro,
Luca Teriaca,
Arkadiusz Berlicki,
Gerardo Capobianco,
Giuseppe Crescenzio,
Vania Da Deppo,
Mauro Focardi,
Fabio Frassetto,
Klaus Heerlein,
Federico Landini,
Enrico Magli,
Andrea Marco Malvezzi,
Giuseppe Massone,
Radek Melich,
Piergiorgio Nicolosi,
Giancarlo Noci,
Maurizio Pancrazzi
, et al. (78 additional authors not shown)
Abstract:
Metis is the first solar coronagraph designed for a space mission capable of performing simultaneous imaging of the off-limb solar corona in both visible and UV light. The observations obtained with Metis aboard the Solar Orbiter ESA-NASA observatory will enable us to diagnose, with unprecedented temporal coverage and spatial resolution, the structures and dynamics of the full corona from 1.7…
▽ More
Metis is the first solar coronagraph designed for a space mission capable of performing simultaneous imaging of the off-limb solar corona in both visible and UV light. The observations obtained with Metis aboard the Solar Orbiter ESA-NASA observatory will enable us to diagnose, with unprecedented temporal coverage and spatial resolution, the structures and dynamics of the full corona from 1.7 $R_\odot$ to about 9 $R_\odot$. Due to the uniqueness of the Solar Orbiter mission profile, Metis will be able to observe the solar corona from a close vantage point (down to 0.28 AU), achieving out-of-ecliptic views with the increase of the orbit inclination over time. Moreover, observations near perihelion, during the phase of lower rotational velocity of the solar surface relative to the spacecraft, will allow longer-term studies of the coronal features. Thanks to a novel occultation design and a combination of a UV interference coating of the mirrors and a spectral bandpass filter, Metis images the solar corona simultaneously in the visible light band, between 580 and 640 nm, and in the UV H I Lyman-α line at 121.6 nm. The coronal images in both the UV Lyman-α and polarised visible light are obtained at high spatial resolution with a spatial scale down to about 2000 km and 15000 km at perihelion, in the cases of the visible and UV light, respectively. A temporal resolution down to 1 second can be achieved when observing coronal fluctuations in visible light. The Metis measurements will allow for complete characterisation of the main physical parameters and dynamics of the electron and neutral hydrogen/proton plasma components of the corona in the region where the solar wind undergoes acceleration and where the onset and initial propagation of coronal mass ejections take place, thus significantly improving our understanding of the region connecting the Sun to the heliosphere.
△ Less
Submitted 14 November, 2019;
originally announced November 2019.
-
Micrometeoroid Events in LISA Pathfinder
Authors:
James Ira Thorpe,
Jacob Slutsky,
John Baker,
Tyson Littenberg,
Sophie Hourihane,
Nicole Pagane,
Petr Pokorny,
Diego Janches,
Michele Armano,
Heather Audley,
G. Auger,
Jonathan Baird,
Massimo Bassan,
Pierre Binetruy,
Michael Born,
D. Bortoluzzi,
N. Brandt,
M. Caleno,
A Cavalleri,
A Cesarini,
A. M. Cruise,
K. Danzmann,
M. de Deus Silva,
R. De Rosa,
L. Di Fiore
, et al. (82 additional authors not shown)
Abstract:
The zodiacal dust complex, a population of dust and small particles that pervades the Solar System, provides important insight into the formation and dynamics of planets, comets, asteroids, and other bodies. Here we present a new set of data obtained using a novel technique: direct measurements of momentum transfer to a spacecraft from individual particle impacts. This technique is made possible b…
▽ More
The zodiacal dust complex, a population of dust and small particles that pervades the Solar System, provides important insight into the formation and dynamics of planets, comets, asteroids, and other bodies. Here we present a new set of data obtained using a novel technique: direct measurements of momentum transfer to a spacecraft from individual particle impacts. This technique is made possible by the extreme precision of the instruments flown on the LISA Pathfinder spacecraft, a technology demonstrator for a future space-based gravitational wave observatory that operated near the first Sun-Earth Lagrange point from early 2016 through Summer of 2017. Using a simple model of the impacts and knowledge of the control system, we show that it is possible to detect impacts and measure properties such as the transferred momentum (related to the particle's mass and velocity), direction of travel, and location of impact on the spacecraft. In this paper, we present the results of a systematic search for impacts during 4348 hours of Pathfinder data. We report a total of 54 candidates with momenta ranging from 0.2$\,μ\textrm{Ns}$ to 230$\,μ\textrm{Ns}$. We furthermore make a comparison of these candidates with models of micrometeoroid populations in the inner solar system including those resulting from Jupiter-family comets, Oort-cloud comets, Hailey-type comets, and Asteroids. We find that our measured population is consistent with a population dominated by Jupiter-family comets with some evidence for a smaller contribution from Hailey-type comets. This is in agreement with consensus models of the zodiacal dust complex in the momentum range sampled by LISA Pathfinder.
△ Less
Submitted 2 October, 2019; v1 submitted 7 May, 2019;
originally announced May 2019.
-
Precision Charge Control for Isolated Free-Falling Test Masses: LISA Pathfinder Results
Authors:
M. Armano,
H. Audley,
J. Baird,
P. Binetruy,
M. Born,
D. Bortoluzzi,
E. Castelli,
A. Cavalleri,
A. Cesarini,
A. M. Cruise,
K. Danzmann,
M. de Deus Silva,
I. Diepholz,
G. Dixon,
R. Dolesi,
L. Ferraioli,
V. Ferroni,
E. D. Fitzsimons,
M. Freschi,
L. Gesa,
D. Giardini,
F. Gibert,
R. Giusteri,
C. Grimani,
J. Grzymisch
, et al. (60 additional authors not shown)
Abstract:
The LISA Pathfinder charge management device was responsible for neutralising the cosmic ray induced electric charge that inevitably accumulated on the free-falling test masses at the heart of the experiment. We present measurements made on ground and in-flight that quantify the performance of this contactless discharge system which was based on photo-emission under UV illumination. In addition, a…
▽ More
The LISA Pathfinder charge management device was responsible for neutralising the cosmic ray induced electric charge that inevitably accumulated on the free-falling test masses at the heart of the experiment. We present measurements made on ground and in-flight that quantify the performance of this contactless discharge system which was based on photo-emission under UV illumination. In addition, a two-part simulation is described that was developed alongside the hardware. Modelling of the absorbed UV light within the Pathfinder sensor was carried out with the GEANT4 software toolkit and a separate MATLAB charge transfer model calculated the net photocurrent between the test masses and surrounding housing in the presence of AC and DC electric fields. We confront the results of these models with observations and draw conclusions for the design of discharge systems for future experiments like LISA that will also employ free-falling test masses.
△ Less
Submitted 17 September, 2018; v1 submitted 6 July, 2018;
originally announced July 2018.
-
Charge-induced force-noise on free-falling test masses: results from LISA Pathfinder
Authors:
M. Armano,
H. Audley,
G. Auger,
J. T. Baird,
P. Binetruy,
M. Born,
D. Bortoluzzi,
N. Brandt,
A. Bursi,
M. Caleno,
A. Cavalleri,
A. Cesarini,
M. Cruise,
K. Danzmann,
M. de Deus Silva,
I. Diepholz,
R. Dolesi,
N. Dunbar,
L. Ferraioli,
V. Ferroni,
E. D. Fitzsimons,
R. Flatscher,
M. Freschi,
J. Gallegos,
C. García Marirrodriga
, et al. (69 additional authors not shown)
Abstract:
We report on electrostatic measurements made on board the European Space Agency mission LISA Pathfinder. Detailed measurements of the charge-induced electrostatic forces exerted on free-falling test masses (TMs) inside the capacitive gravitational reference sensor are the first made in a relevant environment for a space-based gravitational wave detector. Employing a combination of charge control a…
▽ More
We report on electrostatic measurements made on board the European Space Agency mission LISA Pathfinder. Detailed measurements of the charge-induced electrostatic forces exerted on free-falling test masses (TMs) inside the capacitive gravitational reference sensor are the first made in a relevant environment for a space-based gravitational wave detector. Employing a combination of charge control and electric-field compensation, we show that the level of charge-induced acceleration noise on a single TM can be maintained at a level close to 1.0 fm/s^2/sqrt(Hz) across the 0.1-100 mHz frequency band that is crucial to an observatory such as LISA. Using dedicated measurements that detect these effects in the differential acceleration between the two test masses, we resolve the stochastic nature of the TM charge build up due to interplanetary cosmic rays and the TM charge-to-force coupling through stray electric fields in the sensor. All our measurements are in good agreement with predictions based on a relatively simple electrostatic model of the LISA Pathfinder instrument.
△ Less
Submitted 15 February, 2017;
originally announced February 2017.
-
Free-flight experiments in LISA Pathfinder
Authors:
M. Armano,
H. Audley,
G. Auger,
J. Baird,
P. Binetruy,
M. Born,
D. Bortoluzzi,
N. Brandt,
A. Bursi,
M. Caleno,
A. Cavalleri,
A. Cesarini,
M. Cruise,
C. Cutler,
K. Danzmann,
I. Diepholz,
R. Dolesi,
N. Dunbar,
L. Ferraioli,
V. Ferroni,
E. Fitzsimons,
M. Freschi,
J. Gallegos,
C. Garcia. Marirrodriga,
R. Gerndt
, et al. (67 additional authors not shown)
Abstract:
The LISA Pathfinder mission will demonstrate the technology of drag-free test masses for use as inertial references in future space-based gravitational wave detectors. To accomplish this, the Pathfinder spacecraft will perform drag-free flight about a test mass while measuring the acceleration of this primary test mass relative to a second reference test mass. Because the reference test mass is co…
▽ More
The LISA Pathfinder mission will demonstrate the technology of drag-free test masses for use as inertial references in future space-based gravitational wave detectors. To accomplish this, the Pathfinder spacecraft will perform drag-free flight about a test mass while measuring the acceleration of this primary test mass relative to a second reference test mass. Because the reference test mass is contained within the same spacecraft, it is necessary to apply forces on it to maintain its position and attitude relative to the spacecraft. These forces are a potential source of acceleration noise in the LISA Pathfinder system that are not present in the full LISA configuration. While LISA Pathfinder has been designed to meet it's primary mission requirements in the presence of this noise, recent estimates suggest that the on-orbit performance may be limited by this `suspension noise'. The drift-mode or free-flight experiments provide an opportunity to mitigate this noise source and further characterize the underlying disturbances that are of interest to the designers of LISA-like instruments. This article provides a high-level overview of these experiments and the methods under development to analyze the resulting data.
△ Less
Submitted 29 December, 2014;
originally announced December 2014.
