-
Atomic-scale insights into electro-steric substitutional chemistry of cerium oxide
Authors:
Haiwu Zhang,
Ivano E. Castelli,
Simone Santucci,
Simone Sanna,
Nini Pryds,
Vincenzo Esposito
Abstract:
Cerium oxide (ceria, CeO2) is one of the most promising mixed ionic and electronic conducting materials. Previous atomistic analysis has covered widely the effects of substitution on oxygen vacancy migration. However, an in-depth analysis of the role of cation substitution beyond trivalent cations has rarely been explored. Here, we investigate soluble monovalent, divalent, trivalent and tetravalen…
▽ More
Cerium oxide (ceria, CeO2) is one of the most promising mixed ionic and electronic conducting materials. Previous atomistic analysis has covered widely the effects of substitution on oxygen vacancy migration. However, an in-depth analysis of the role of cation substitution beyond trivalent cations has rarely been explored. Here, we investigate soluble monovalent, divalent, trivalent and tetravalent cation substituents. By combining classical simulations and quantum mechanical calculations, we provide an insight into defect association energies between substituent cations and oxygen vacancies as well as their effects on the diffusion mechanisms. Our simulations indicate that oxygen ionic diffusivity of subvalent cation-substituted systems follows the order Gd>Ca>Na. With the same charge, a larger size mismatch with Ce cation yields a lower oxygen ionic diffusivity, i.e., Na>K, Ca>Ni, Gd>Al. Based on these trends, we identify species that could tune the oxygen ionic diffusivity: we estimate that the optimum oxygen vacancy concentration for achieving fast oxygen ionic transport is 2.5% for GdxCe1-xO2-x/2, CaxCe1-xO2-x and NaxCe1-xO2-3x/2 at 800 K. Remarkably, such a concentration is not constant and shifts gradually to higher values as the temperature is increased. We find that co-substitutions can enhance the impact of the single substitutions beyond that expected by their simple addition. Furthermore, we identify preferential oxygen ion migration pathways, which illustrate the electro-steric effects of substituent cations in determining the energy barrier of oxygen ion migration. Such fundamental insights into the factors that govern the oxygen diffusion coefficient and migration energy would enable design criteria to be defined for tuning the ionic properties of the material, e.g., by co-do**.
△ Less
Submitted 10 February, 2021;
originally announced February 2021.
-
Thermally activated intermittent dynamics of cree** crack fronts along disordered interfaces
Authors:
Tom Vincent-Dospital,
Alain Cochard,
Stéphane Santucci,
Knut Jørgen Måløy,
Renaud Toussaint
Abstract:
We present a subcritical fracture growth model, coupled with the elastic redistribution of the acting mechanical stress along rugous rupture fronts. We show the ability of this model to quantitatively reproduce the intermittent dynamics of cracks propagating along weak disordered interfaces. To this end, we assume that the fracture energy of such interfaces (in the sense of a critical energy relea…
▽ More
We present a subcritical fracture growth model, coupled with the elastic redistribution of the acting mechanical stress along rugous rupture fronts. We show the ability of this model to quantitatively reproduce the intermittent dynamics of cracks propagating along weak disordered interfaces. To this end, we assume that the fracture energy of such interfaces (in the sense of a critical energy release rate) follows a spatially correlated normal distribution. We compare various statistical features from the hence obtained fracture dynamics to that from cracks propagating in sintered polymethylmethacrylate (PMMA) interfaces. In previous works, it has been demonstrated that such approach could reproduce the mean advance of fractures and their local front velocity distribution. Here, we go further by showing that the proposed model also quantitatively accounts for the complex self-affine scaling morphology of crack fronts and their temporal evolution, for the spatial and temporal correlations of the local velocity fields and for the avalanches size distribution of the intermittent growth dynamics. We thus provide new evidence that Arrhenius-like subcritical growth laws are particularly suitable for the description of cree** cracks.
△ Less
Submitted 11 October, 2021; v1 submitted 14 October, 2020;
originally announced October 2020.
-
Electro-Chemo-Mechanical Properties in Nanostructured Ca-doped Ceria (CDC) by Field Assisted Sintering
Authors:
Ahsanul Kabira,
Haiwu Zhang,
Sofie Colding-Jørgensen,
Simone Santucci,
Sebastian Molin,
Vincenzo Esposito
Abstract:
Recent investigations have shown that highly oxygen defective cerium oxides generate non-classical electrostriction that is superior to lead-based ferroelectrics. In this work, we report the effect of field-assisted spark plasma sintering (SPS) on electro-chemo-mechanical properties on Ca-doped ceria (CDC). Nanometric powders of ca. 10 nm are rapidly consolidated to form polycrystalline nanostruct…
▽ More
Recent investigations have shown that highly oxygen defective cerium oxides generate non-classical electrostriction that is superior to lead-based ferroelectrics. In this work, we report the effect of field-assisted spark plasma sintering (SPS) on electro-chemo-mechanical properties on Ca-doped ceria (CDC). Nanometric powders of ca. 10 nm are rapidly consolidated to form polycrystalline nanostructures with a high degree of crystalline disorder. Remarkably, the resultant material demonstrates a large electromechanical strain without a frequency-related relaxation effect. We conclude that electromechanical activity in CDC materials strictly depends on the Ca-VO interaction, while disorder at the crystalline boundaries has a minor effect.
△ Less
Submitted 16 June, 2020;
originally announced June 2020.
-
Effect of Oxygen Defects Blocking Barriers on Gadolinium Doped Ceria (GDC) Electro-Chemo-Mechanical Properties
Authors:
Ahsanul Kabir,
Simone Santucci,
Ngo Van Nong,
Maxim Varenik,
Igor Lubomirsky,
Robin Nigon,
Paul Muralt,
Vincenzo Esposito
Abstract:
Some oxygen defective metal oxides, such as cerium and bismuth oxides, have recently shown exceptional electrostrictive properties that are even superior to the best performing lead-based electrostrictors, e.g. lead-magnesium-niobates (PMN). Compared to piezoelectric ceramics, electromechanical mechanisms of such materials do not depend on crystalline symmetry, but on the concentration of oxygen v…
▽ More
Some oxygen defective metal oxides, such as cerium and bismuth oxides, have recently shown exceptional electrostrictive properties that are even superior to the best performing lead-based electrostrictors, e.g. lead-magnesium-niobates (PMN). Compared to piezoelectric ceramics, electromechanical mechanisms of such materials do not depend on crystalline symmetry, but on the concentration of oxygen vacancy in the lattice. In this work, we investigate for the first time the role of oxygen defect configuration on the electro-chemo-mechanical properties. This is achieved by tuning the oxygen defects blocking barrier density in polycrystalline gadolinium doped ceria with known oxygen vacancy concentration, Ce0.9Gd0.1O2-x,x= 0.05. Nanometric starting powders of ca. 12 nm are sintered in different conditions, including field assisted spark plasma sintering (SPS), fast firing and conventional method at high temperatures. These approaches allow controlling grain size and Gd-dopant diffusion, i.e. via thermally driven solute drag mechanism. By correlating the electro-chemo-mechanical properties, we show that oxygen vacancy distribution in the materials play a key role in ceria electrostriction, overcoming the expected contributions from grain size and dopant concentration.
△ Less
Submitted 3 July, 2019;
originally announced July 2019.
-
How heat controls fracture: the thermodynamics of cree** and avalanching cracks
Authors:
Tom Vincent-Dospital,
Renaud Toussaint,
Stéphane Santucci,
Loïc Vanel,
Daniel Bonamy,
Lamine Hattali,
Alain Cochard,
Eirik Flekkøy,
Knut Jørgen Måløy
Abstract:
While of paramount importance in material science, the dynamics of cracks still lacks a complete physical explanation. The transition from their slow creep behavior to a fast propagation regime is a notable key, as it leads to full material failure if the size of a fast avalanche reaches that of the system. We here show that a simple thermodynamics approach can actually account for such complex cr…
▽ More
While of paramount importance in material science, the dynamics of cracks still lacks a complete physical explanation. The transition from their slow creep behavior to a fast propagation regime is a notable key, as it leads to full material failure if the size of a fast avalanche reaches that of the system. We here show that a simple thermodynamics approach can actually account for such complex crack dynamics, and in particular for the non-monotonic force-velocity curves commonly observed in mechanical tests on various materials. We consider a thermally activated failure process that is coupled with the production and the diffusion of heat at the fracture tip. In this framework, the rise in temperature only affects the sub-critical crack dynamics and not the mechanical properties of the material. We show that this description can quantitatively reproduce the rupture of two different polymeric materials (namely, the mode I opening of polymethylmethacrylate (PMMA) plates, and the peeling of pressure sensitive adhesive (PSA) tapes), from the very slow to the very fast fracturing regimes, over seven to nine decades of crack propagation velocities. In particular, the fastest regime is obtained with an increase of temperature of thousands of kelvins, on the molecular scale around the crack tip. Although surprising, such an extreme temperature is actually consistent with different experimental observations that accompany the fast propagation of cracks, namely, fractoluminescence (i.e., the emission of visible light during rupture) and a complex morphology of post-mortem fracture surfaces, which could be due to the sublimation of bubbles.
△ Less
Submitted 18 September, 2020; v1 submitted 17 May, 2019;
originally announced May 2019.
-
Bending to kinetic energy transfer in adhesive peel front micro-instability
Authors:
V. De Zotti,
K. Rapina,
P. -P. Cortet,
L. Vanel,
S. Santucci
Abstract:
We report an extensive experimental study of a detachment front dynamics instability, appearing at microscopic scales during the peeling of adhesive tapes. The amplitude of this instability scales with its period as $A_{\text{mss}} \propto T_{\text{mss}}^{1/3}$, with a pre-factor evolving slightly with the peel angle $θ$, and increasing systematically with the bending modulus $B$ of the tape backi…
▽ More
We report an extensive experimental study of a detachment front dynamics instability, appearing at microscopic scales during the peeling of adhesive tapes. The amplitude of this instability scales with its period as $A_{\text{mss}} \propto T_{\text{mss}}^{1/3}$, with a pre-factor evolving slightly with the peel angle $θ$, and increasing systematically with the bending modulus $B$ of the tape backing. Establishing a local energy budget of the detachment process during one period of this micro-instability, our theoretical model shows that the elastic bending energy stored in the portion of tape to be peeled is converted into kinetic energy, providing a quantitative description of the experimental scaling law.
△ Less
Submitted 29 December, 2018;
originally announced December 2018.
-
Inter-event correlations from avalanches hiding below the detection threshold
Authors:
Sanja Janićević,
Lasse Laurson,
Knut Jørgen Måløy,
Stéphane Santucci,
Mikko J. Alava
Abstract:
Numerous systems ranging from deformation of materials to earthquakes exhibit bursty dynamics, which consist of a sequence of events with a broad event size distribution. Very often these events are observed to be temporally correlated or clustered, evidenced by power-law distributed waiting times separating two consecutive activity bursts. We show how such inter-event correlations arise simply be…
▽ More
Numerous systems ranging from deformation of materials to earthquakes exhibit bursty dynamics, which consist of a sequence of events with a broad event size distribution. Very often these events are observed to be temporally correlated or clustered, evidenced by power-law distributed waiting times separating two consecutive activity bursts. We show how such inter-event correlations arise simply because of a finite detection threshold, created by the limited sensitivity of the measurement apparatus, or used to subtract background activity or noise from the activity signal. Data from crack propagation experiments and numerical simulations of a non-equilibrium crack line model demonstrate how thresholding leads to correlated bursts of activity by separating the avalanche events into sub-avalanches. The resulting temporal sub-avalanche correlations are well-described by our general scaling description of thresholding-induced correlations in crackling noise.
△ Less
Submitted 26 October, 2016;
originally announced October 2016.
-
Bursts of activity in collective cell migration
Authors:
Oleksandr Chepizhko,
Costanza Giampietro,
Eleonora Mastrapasqua,
Mehdi Nourazar,
Miriam Ascagni,
Michela Sugni,
Umberto Fascio,
Livio Leggio,
Chiara Malinverno,
Giorgio Scita,
Stephane Santucci,
Mikko J. Alava,
Stefano Zapperi,
Caterina A. M. La Porta
Abstract:
Dense monolayers of living cells display intriguing relaxation dynamics, reminiscent of soft and glassy materials close to the jamming transition, and migrate collectively when space is available, as in wound healing or in cancer invasion. Here we show that collective cell migration occurs in bursts that are similar to those recorded in the propagation of cracks, fluid fronts in porous media and f…
▽ More
Dense monolayers of living cells display intriguing relaxation dynamics, reminiscent of soft and glassy materials close to the jamming transition, and migrate collectively when space is available, as in wound healing or in cancer invasion. Here we show that collective cell migration occurs in bursts that are similar to those recorded in the propagation of cracks, fluid fronts in porous media and ferromagnetic domain walls. In analogy with these systems, the distribution of activity bursts displays scaling laws that are universal in different cell types and for cells moving on different substrates. The main features of the invasion dynamics are quantitatively captured by a model of interacting active particles moving in a disordered landscape. Our results illustrate that collective motion of living cells is analogous to the corresponding dynamics in driven, but inanimate, systems.
△ Less
Submitted 25 October, 2016;
originally announced October 2016.
-
Multiscale Stick-Slip Dynamics of Adhesive Tape Peeling
Authors:
Marie-Julie Dalbe,
Pierre-Philippe Cortet,
Matteo Ciccotti,
Loic Vanel,
Stephane Santucci
Abstract:
Using a high-speed camera, we follow the propagation of the detachment front during the peeling of an adhesive tape from a flat surface. In a given range of peeling velocity, this front displays a multiscale unstable dynamics, entangling two well-separated spatiotemporal scales, which correspond to microscopic and macroscopic dynamical stick-slip instabilities. While the periodic release of the st…
▽ More
Using a high-speed camera, we follow the propagation of the detachment front during the peeling of an adhesive tape from a flat surface. In a given range of peeling velocity, this front displays a multiscale unstable dynamics, entangling two well-separated spatiotemporal scales, which correspond to microscopic and macroscopic dynamical stick-slip instabilities. While the periodic release of the stretch energy of the whole peeled ribbon drives the classical macro-stick-slip, we show that the micro-stick-slip, due to the regular propagation of transverse dynamic fractures discovered by Thoroddsen et al. [Phys. Rev. E 82, 046107 (2010)], is related to a high-frequency periodic release of the elastic bending energy of the adhesive ribbon concentrated in the vicinity of the peeling front.
△ Less
Submitted 9 September, 2015;
originally announced September 2015.
-
Rate-dependent elastic hysteresis during the peeling of Pressure Sensitive Adhesives
Authors:
Richard Villey,
Costantino Creton,
Pierre-Philippe Cortet,
Marie-Julie Dalbe,
Thomas Jet,
Baudouin Saintyves,
Stéphane Santucci,
Loïc Vanel,
David Yarusso,
Matteo Ciccotti
Abstract:
The modelling of the adherence energy during peeling of Pressure Sensitive Adhesives (PSA) has received much attention since the 1950's, uncovering several factors that aim at explaining their high adherence on most substrates, such as the softness and strong viscoelastic behaviour of the adhesive, the low thickness of the adhesive layer and its confinement by a rigid backing. The more recent inve…
▽ More
The modelling of the adherence energy during peeling of Pressure Sensitive Adhesives (PSA) has received much attention since the 1950's, uncovering several factors that aim at explaining their high adherence on most substrates, such as the softness and strong viscoelastic behaviour of the adhesive, the low thickness of the adhesive layer and its confinement by a rigid backing. The more recent investigation of adhesives by probe-tack methods also revealed the importance of cavitation and stringing mechanisms during debonding, underlining the influence of large deformations and of the related non-linear response of the material, which also intervenes during peeling. Although a global modelling of the complex coupling of all these ingredients remains a formidable issue, we report here some key experiments and modelling arguments that should constitute an important step forward. We first measure a non-trivial dependence of the adherence energy on the loading geometry, namely through the influence of the peeling angle, which is found to be separable from the peeling velocity dependence. This is the first time to our knowledge that such adherence energy dependence on the peeling angle is systematically investigated and unambiguously demonstrated. Secondly, we reveal an independent strong influence of the large strain rheology of the adhesives on the adherence energy. We complete both measurements with a microscopic investigation of the debonding region. We discuss existing modellings in light of these measurements and of recent soft material mechanics arguments, to show that the adherence energy during peeling of PSA should not be associated to the propagation of an interfacial stress singularity. The relevant deformation mechanisms are actually located over the whole adhesive thickness, and the adherence energy during peeling of PSA should rather be associated to the energy loss by viscous friction and by rate-dependent elastic hysteresis.
△ Less
Submitted 20 May, 2015;
originally announced May 2015.
-
Three-dimensional foam flow resolved by fast X-ray tomographic microscopy
Authors:
Christophe Raufaste,
Benjamin Dollet,
Kevin Mader,
Stéphane Santucci,
Rajmund Mokso
Abstract:
Thanks to ultra fast and high resolution X-ray tomography, we managed to capture the evolution of the local structure of the bubble network of a 3D foam flowing around a sphere. As for the 2D foam flow around a circular obstacle, we observed an axisymmetric velocity field with a recirculation zone, and indications of a negative wake downstream the obstacle. The bubble deformations, quantified by a…
▽ More
Thanks to ultra fast and high resolution X-ray tomography, we managed to capture the evolution of the local structure of the bubble network of a 3D foam flowing around a sphere. As for the 2D foam flow around a circular obstacle, we observed an axisymmetric velocity field with a recirculation zone, and indications of a negative wake downstream the obstacle. The bubble deformations, quantified by a shape tensor, are smaller than in 2D, due to a purely 3D feature: the azimuthal bubble shape variation. Moreover, we were able to detect plastic rearrangements, characterized by the neighbor-swap** of four bubbles. Their spatial structure suggest that rearrangements are triggered when films faces get smaller than a characteristic area.
△ Less
Submitted 19 March, 2015;
originally announced March 2015.
-
Strong dynamical effects during stick-slip adhesive peeling
Authors:
Marie-Julie Dalbe,
Stéphane Santucci,
Pierre-Philippe Cortet,
Loïc Vanel
Abstract:
We consider the classical problem of the stick-slip dynamics observed when peeling a roller adhesive tape at a constant velocity. From fast imaging recordings, we extract the dependencies of the stick and slip phases durations with the imposed peeling velocity and peeled ribbon length. Predictions of Maugis and Barquins [in Adhesion 12, edited by K.W. Allen, Elsevier ASP, London, 1988, pp. 205--22…
▽ More
We consider the classical problem of the stick-slip dynamics observed when peeling a roller adhesive tape at a constant velocity. From fast imaging recordings, we extract the dependencies of the stick and slip phases durations with the imposed peeling velocity and peeled ribbon length. Predictions of Maugis and Barquins [in Adhesion 12, edited by K.W. Allen, Elsevier ASP, London, 1988, pp. 205--222] based on a quasistatic assumption succeed to describe quantitatively our measurements of the stick phase duration. Such model however fails to predict the full stick-slip cycle duration, revealing strong dynamical effects during the slip phase.
△ Less
Submitted 14 November, 2013;
originally announced November 2013.
-
Near-field electrospinning of conjugated polymer light-emitting nanofibers
Authors:
Daniela Di Camillo,
Vito Fasano,
Fabrizio Ruggieri,
Sandro Santucci,
Luca Lozzi,
Andrea Camposeo,
Dario Pisignano
Abstract:
The authors report on the realization of ordered arrays of light-emitting conjugated polymer nanofibers by near-field electrospinning. The fibers, made by poly[2-methoxy-5-(2-ethylhexyloxy)-1,4-phenylenevinylene], have diameters of few hundreds of nanometers and emission peaked at 560 nm. The observed blue-shift compared to the emission from reference films is attributed to different polymer packi…
▽ More
The authors report on the realization of ordered arrays of light-emitting conjugated polymer nanofibers by near-field electrospinning. The fibers, made by poly[2-methoxy-5-(2-ethylhexyloxy)-1,4-phenylenevinylene], have diameters of few hundreds of nanometers and emission peaked at 560 nm. The observed blue-shift compared to the emission from reference films is attributed to different polymer packing in the nanostructures. Optical confinement in the fibers is also analyzed through self-waveguided emission. These results open interesting perspectives for realizing complex and ordered architectures by light-emitting nanofibers, such as photonic circuits, and for the precise positioning and integration of conjugated polymer fibers into light-emitting devices.
△ Less
Submitted 11 November, 2013; v1 submitted 18 October, 2013;
originally announced October 2013.
-
Sound and light from fractures in scintillators
Authors:
A. Tantot,
S. Santucci,
O. Ramos,
S. Deschanel,
M. -A. Verdier,
E. Mony,
Y. Wei,
S. Ciliberto,
L. Vanel,
P. C. F. Di Stefano
Abstract:
Prompted by intriguing events observed in certain particle-physics searches for rare events, we study light and acoustic emission simultaneously in some inorganic scintillators subject to mechanical stress. We observe mechanoluminescence in ${Bi}_4{Ge}_{3}{O}_{12}$, ${CdWO}_{4}$ and ${ZnWO}_{4}$, in various mechanical configurations at room temperature and ambient pressure. We analyze how the ligh…
▽ More
Prompted by intriguing events observed in certain particle-physics searches for rare events, we study light and acoustic emission simultaneously in some inorganic scintillators subject to mechanical stress. We observe mechanoluminescence in ${Bi}_4{Ge}_{3}{O}_{12}$, ${CdWO}_{4}$ and ${ZnWO}_{4}$, in various mechanical configurations at room temperature and ambient pressure. We analyze how the light emission is correlated to acoustic emission during fracture. For ${Bi}_4{Ge}_{3}{O}_{12}$, we set a lower bound on the energy of the emitted light, and deduce that the fraction of elastic energy converted to light is at least $3 \times 10^{-5}$.
△ Less
Submitted 17 October, 2013; v1 submitted 15 May, 2013;
originally announced May 2013.
-
Intermittent stick-slip dynamics during the peeling of an adhesive tape from a roller
Authors:
Pierre-Philippe Cortet,
Marie-Julie Dalbe,
Claudia Guerra,
Caroline Cohen,
Matteo Ciccotti,
Stéphane Santucci,
Loïc Vanel
Abstract:
We study experimentally the fracture dynamics during the peeling at a constant velocity of a roller adhesive tape mounted on a freely rotating pulley. Thanks to a high speed camera, we measure, in an intermediate range of peeling velocities, high frequency oscillations between phases of slow and rapid propagation of the peeling fracture. This so-called stick-slip regime is well known as the conseq…
▽ More
We study experimentally the fracture dynamics during the peeling at a constant velocity of a roller adhesive tape mounted on a freely rotating pulley. Thanks to a high speed camera, we measure, in an intermediate range of peeling velocities, high frequency oscillations between phases of slow and rapid propagation of the peeling fracture. This so-called stick-slip regime is well known as the consequence of a decreasing fracture energy of the adhesive in a certain range of peeling velocity coupled to the elasticity of the peeled tape. Simultaneously with stick-slip, we observe low frequency oscillations of the adhesive roller angular velocity which are the consequence of a pendular instability of the roller submitted to the peeling force. The stick-slip dynamics is shown to become intermittent due to these slow pendular oscillations which produce a quasi-static oscillation of the peeling angle while kee** constant the peeling fracture velocity (averaged over each stick-slip cycle). The observed correlation between the mean peeling angle and the stick-slip amplitude questions the validity of the usually admitted independence with the peeling angle of the fracture energy of adhesives.
△ Less
Submitted 31 January, 2013;
originally announced January 2013.
-
Local dynamics of a randomly pinned crack front during creep and forced propagation: An experimental study
Authors:
Ken Tore Tallakstad,
Renaud Toussaint,
Stéphane Santucci,
Jean Schmittbuhl,
Knut Jørgen Måløy
Abstract:
We have studied the propagation of a crack front along the heterogeneous weak plane of a transparent poly(methyl methacrylate) (PMMA) block using two different loading conditions: imposed constant velocity and creep relaxation. We have focused on the intermittent local dynamics of the fracture front for a wide range of average crack front propagation velocities spanning over four decades. We compu…
▽ More
We have studied the propagation of a crack front along the heterogeneous weak plane of a transparent poly(methyl methacrylate) (PMMA) block using two different loading conditions: imposed constant velocity and creep relaxation. We have focused on the intermittent local dynamics of the fracture front for a wide range of average crack front propagation velocities spanning over four decades. We computed the local velocity fluctuations along the fracture front. Two regimes are emphasized: a depinning regime of high velocity clusters defined as avalanches and a pinning regime of very low-velocity cree** lines. The scaling properties of the avalanches and pinning lines (size and spatial extent) are found to be independent of the loading conditions and of the average crack front velocity. The distribution of local fluctuations of the crack front velocity are related to the observed avalanche size distribution. Space-time correlations of the local velocities show a simple diffusion growth behavior.
△ Less
Submitted 28 May, 2012;
originally announced May 2012.
-
Field emission from single and few-layer graphene flakes
Authors:
S. Santandrea,
F. Giubileo,
V. Grossi,
S. Santucci,
M. Passacantando,
T. Schroeder,
G. Lupina,
A. Di Bartolomeo
Abstract:
We report the observation and characterization of field emission current from individual single- and few-layer graphene flakes laid on a flat SiO2/Si substrate. Measurements were performed in a scanning electron microscope chamber equipped with nanoprobes, used as electrodes to realize local measurements of the field emission current. We achieved field emission currents up to 1 μA from the flat pa…
▽ More
We report the observation and characterization of field emission current from individual single- and few-layer graphene flakes laid on a flat SiO2/Si substrate. Measurements were performed in a scanning electron microscope chamber equipped with nanoprobes, used as electrodes to realize local measurements of the field emission current. We achieved field emission currents up to 1 μA from the flat part of graphene flakes at applied fields of few hundred V/μm. We found that emission process is stable over a period of several hours and that it is well described by a Fowler-Nordheim model for currents over 5 orders of magnitude.
△ Less
Submitted 16 February, 2011;
originally announced February 2011.
-
Fracture Roughness Scaling: a case study on planar cracks
Authors:
Stéphane Santucci,
Mélanie Grob,
Alex Hansen,
Renaud Toussaint,
Jean Schmittbuhl,
Knut Jørgen Måløy
Abstract:
Using a multi-resolution technique, we analyze large in-plane fracture fronts moving slowly between two sintered Plexiglas plates. We find that the roughness of the front exhibits two distinct regimes separated by a crossover length scale $δ^*$. Below $δ^*$, we observe a multi-affine regime and the measured roughness exponent $ζ_{\parallel}^{-} = 0.60\pm 0.05$ is in agreement with the coalescence…
▽ More
Using a multi-resolution technique, we analyze large in-plane fracture fronts moving slowly between two sintered Plexiglas plates. We find that the roughness of the front exhibits two distinct regimes separated by a crossover length scale $δ^*$. Below $δ^*$, we observe a multi-affine regime and the measured roughness exponent $ζ_{\parallel}^{-} = 0.60\pm 0.05$ is in agreement with the coalescence model. Above $δ^*$, the fronts are mono-affine, characterized by a roughness exponent $ζ_{\parallel}^{+} = 0.35\pm0.05$, consistent with the fluctuating line model. We relate the crossover length scale to fluctuations in fracture toughness and the stress intensity factor.
△ Less
Submitted 7 July, 2010;
originally announced July 2010.
-
Reply to the comment on "Avalanches and Non-Gaussian Fluctuations of the Global Velocity of Imbibition Fronts"
Authors:
Ramon Planet,
Stéphane Santucci,
Jordi Ortín
Abstract:
In [R. Planet, S. Santucci and J. Ortin, Phys. Rev. Lett. 102, 094502 (2009)], we reported that both the size and duration of the global avalanches observed during a forced imbibition process follow power law distributions with cut-offs. Following a comment by G. Pruessner, we discuss here the right procedure to perfom, in order to extract reliable exponents characterising those pdf's.
In [R. Planet, S. Santucci and J. Ortin, Phys. Rev. Lett. 102, 094502 (2009)], we reported that both the size and duration of the global avalanches observed during a forced imbibition process follow power law distributions with cut-offs. Following a comment by G. Pruessner, we discuss here the right procedure to perfom, in order to extract reliable exponents characterising those pdf's.
△ Less
Submitted 17 June, 2010;
originally announced June 2010.
-
Avalanches and clusters in planar crack front propagation
Authors:
Lasse Laurson,
Stephane Santucci,
Stefano Zapperi
Abstract:
We study avalanches in a model for a planar crack propagating in a disordered medium. Due to long-range interactions, avalanches are formed by a set of spatially disconnected local clusters, the sizes of which are distributed according to a power law with an exponent $τ_{a}=1.5$. We derive a scaling relation $τ_a=2τ-1$ between the local cluster exponent $τ_a$ and the global avalanche exponent $τ$.…
▽ More
We study avalanches in a model for a planar crack propagating in a disordered medium. Due to long-range interactions, avalanches are formed by a set of spatially disconnected local clusters, the sizes of which are distributed according to a power law with an exponent $τ_{a}=1.5$. We derive a scaling relation $τ_a=2τ-1$ between the local cluster exponent $τ_a$ and the global avalanche exponent $τ$. For length scales longer than a cross-over length proportional to the Larkin length, the aspect ratio of the local clusters scales with the roughness exponent of the line model. Our analysis provides an explanation for experimental results on planar crack avalanches in Plexiglas plates, but the results are applicable also to other systems with long-range interactions.
△ Less
Submitted 16 April, 2010; v1 submitted 12 November, 2009;
originally announced November 2009.
-
Field emission from single multi-wall carbon nanotubes
Authors:
M. Passacantando,
F. Bussolotti,
S. Santucci,
A. Di Bartolomeo,
F. Giubileo,
L. Iemmo,
A. M. Cucolo
Abstract:
Electron field emission characteristics of individual multiwalled carbon nanotubes have been investigated by a piezoelectric nanomanipulation system operating inside a scanning electron microscopy chamber. The experimental setup ensures a high control capability on the geometric parameters of the field emission system (CNT length, diameter and anode-cathode distance). For several multiwalled car…
▽ More
Electron field emission characteristics of individual multiwalled carbon nanotubes have been investigated by a piezoelectric nanomanipulation system operating inside a scanning electron microscopy chamber. The experimental setup ensures a high control capability on the geometric parameters of the field emission system (CNT length, diameter and anode-cathode distance). For several multiwalled carbon nanotubes, reproducible and quite stable emission current behaviour has been obtained with a dependence on the applied voltage well described by a series resistance modified Fowler-Nordheim model. A turn-on field of about 30 V/um and a field enhancement factor of around 100 at a cathode-anode distance of the order of 1 um have been evaluated. Finally, the effect of selective electron beam irradiation on the nanotube field emission capabilities has been extensively investigated.
△ Less
Submitted 6 March, 2008;
originally announced March 2008.
-
Crackling dynamics in material failure as the signature of a self-organized dynamic phase transition
Authors:
Daniel Bonamy,
Stéphane Santucci,
Laurent Ponson
Abstract:
We derive here a linear elastic stochastic description for slow crack growth in heterogeneous materials. This approach succeeds in reproducing quantitatively the intermittent crackling dynamics observed recently during the slow propagation of a crack along a weak heterogeneous plane of a transparent Plexiglas block [Måløy {\it et al.}, PRL {\bf 96} 045501]. In this description, the quasi-static…
▽ More
We derive here a linear elastic stochastic description for slow crack growth in heterogeneous materials. This approach succeeds in reproducing quantitatively the intermittent crackling dynamics observed recently during the slow propagation of a crack along a weak heterogeneous plane of a transparent Plexiglas block [Måløy {\it et al.}, PRL {\bf 96} 045501]. In this description, the quasi-static failure of heterogeneous media appears as a self-organized critical phase transition. As such, it exhibits universal and to some extent predictable scaling laws, analogue to that of other systems like for example magnetization noise in ferromagnets.
△ Less
Submitted 22 September, 2008; v1 submitted 3 March, 2008;
originally announced March 2008.
-
Local probing of the field emission stability of vertically aligned multiwalled carbon nanotubes
Authors:
F. Giubileo,
A. Di Bartolomeo,
A. Scarfato,
L. Iemmo,
F. Bobba,
M. Passacantando,
S. Santucci,
A. M. Cucolo
Abstract:
Metallic cantilever in high vacuum atomic force microscope has been used as anode for field emission experiments from densely packed vertically aligned multi-walled carbon nanotubes. The high spatial resolution provided by the scanning probe technique allowed precise setting of the tip-sample distance in the submicron region. The dimension of the probe (curvature radius below 50nm) allowed to me…
▽ More
Metallic cantilever in high vacuum atomic force microscope has been used as anode for field emission experiments from densely packed vertically aligned multi-walled carbon nanotubes. The high spatial resolution provided by the scanning probe technique allowed precise setting of the tip-sample distance in the submicron region. The dimension of the probe (curvature radius below 50nm) allowed to measure current contribution from sample areas smaller than 1um^2. The study of long-term stability evidenced that on these small areas the field emission current remains stable (within 10% fluctuations) several hours (at least up to 72 hours) at current intensities between 10-5A and 10-8A. Improvement of the current stability has been observed after performing long-time Joule heating conditioning to completely remove possible adsorbates on the nanotubes.
△ Less
Submitted 29 February, 2008;
originally announced February 2008.
-
Slow crack growth in polycarbonate films
Authors:
Pierre-Philippe Cortet,
Stéphane Santucci,
Loic Vanel,
Sergio Ciliberto
Abstract:
We study experimentally the slow growth of a single crack in polycarbonate films submitted to uniaxial and constant imposed stress. The specificity of fracture in polycarbonate films is the appearance of flame shaped macroscopic process zones at the tips of the crack. Supported by an experimental study of the mechanical properties of polycarbonate films, an analysis of the stress dependence of t…
▽ More
We study experimentally the slow growth of a single crack in polycarbonate films submitted to uniaxial and constant imposed stress. The specificity of fracture in polycarbonate films is the appearance of flame shaped macroscopic process zones at the tips of the crack. Supported by an experimental study of the mechanical properties of polycarbonate films, an analysis of the stress dependence of the mean ratio between the process zone and crack lengths, during the crack growth, show a quantitative agreement with the Dugdale-Barenblatt model of the plastic process zone. We find that the fracture growth curves obey strong scaling properties that lead to a well defined growth master curve.
△ Less
Submitted 25 June, 2007;
originally announced June 2007.
-
Subcritical crack growth in fibrous materials
Authors:
Stéphane Santucci,
Pierre-Philippe Cortet,
Stéphanie Deschanel,
Loic Vanel,
Sergio Ciliberto
Abstract:
We present experiments on the slow growth of a single crack in a fax paper sheet submitted to a constant force $F$. We find that statistically averaged crack growth curves can be described by only two parameters : the mean rupture time $τ$ and a characteristic growth length $ζ$. We propose a model based on a thermally activated rupture process that takes into account the microstructure of cellul…
▽ More
We present experiments on the slow growth of a single crack in a fax paper sheet submitted to a constant force $F$. We find that statistically averaged crack growth curves can be described by only two parameters : the mean rupture time $τ$ and a characteristic growth length $ζ$. We propose a model based on a thermally activated rupture process that takes into account the microstructure of cellulose fibers. The model is able to reproduce the shape of the growth curve, the dependence of $ζ$ on $F$ as well as the effect of temperature on the rupture time $τ$. We find that the length scale at which rupture occurs in this model is consistently close to the diameter of cellulose microfibrils.
△ Less
Submitted 25 June, 2007;
originally announced June 2007.
-
Slow crack growth : models and experiments
Authors:
Stéphane Santucci,
Loic Vanel,
Sergio Ciliberto
Abstract:
The properties of slow crack growth in brittle materials are analyzed both theoretically and experimentally. We propose a model based on a thermally activated rupture process. Considering a 2D spring network submitted to an external load and to thermal noise, we show that a preexisting crack in the network may slowly grow because of stress fluctuations. An analytical solution is found for the ev…
▽ More
The properties of slow crack growth in brittle materials are analyzed both theoretically and experimentally. We propose a model based on a thermally activated rupture process. Considering a 2D spring network submitted to an external load and to thermal noise, we show that a preexisting crack in the network may slowly grow because of stress fluctuations. An analytical solution is found for the evolution of the crack length as a function of time, the time to rupture and the statistics of the crack jumps. These theoretical predictions are verified by studying experimentally the subcritical growth of a single crack in thin sheets of paper. A good agreement between the theoretical predictions and the experimental results is found. In particular, our model suggests that the statistical stress fluctuations trigger rupture events at a nanometric scale corresponding to the diameter of cellulose microfibrils.
△ Less
Submitted 28 March, 2007;
originally announced March 2007.
-
A local field emission study of partially aligned carbon-nanotubes by AFM probe
Authors:
A. Di Bartolomeo,
A. Scarfato,
F. Giubileo,
F. Bobba,
M. Biasucci,
A. M. Cucolo,
S. Santucci,
M. Passacantando
Abstract:
We report on the application of Atomic Force Microscopy (AFM) for studying the Field Emission (FE) properties of a dense array of long and vertically quasi-aligned multi-walled carbon nanotubes grown by catalytic Chemical Vapor Deposition on a silicon substrate. The use of nanometric probes enables local field emission measurements allowing investigation of effects non detectable with a conventi…
▽ More
We report on the application of Atomic Force Microscopy (AFM) for studying the Field Emission (FE) properties of a dense array of long and vertically quasi-aligned multi-walled carbon nanotubes grown by catalytic Chemical Vapor Deposition on a silicon substrate. The use of nanometric probes enables local field emission measurements allowing investigation of effects non detectable with a conventional parallel plate setup, where the emission current is averaged on a large sample area. The micrometric inter-electrode distance let achieve high electric fields with a modest voltage source. Those features allowed us to characterize field emission for macroscopic electric fields up to 250 V/$μ$m and attain current densities larger than 10$^5$ A/cm$^2$. FE behaviour is analyzed in the framework of the Fowler-Nordheim theory. A field enhancement factor $γ\approx$ 40-50 and a turn-on field $E_{turn-on} \sim$15 V/$μ$m at an inter-electrode distance of 1 $μ$m are estimated. Current saturation observed at high voltages in the I-V characteristics is explained in terms of a series resistance of the order of M$Ω$. Additional effects as electrical conditioning, CNT degradation, response to laser irradiation and time stability are investigated and discussed.
△ Less
Submitted 28 February, 2007;
originally announced February 2007.
-
Discrepancy between sub-critical and fast rupture roughness: a cumulant analysis
Authors:
N. Mallick,
P. -P. Cortet,
S. Santucci,
S. G. Roux,
L. Vanel
Abstract:
We study the roughness of a crack interface in a sheet of paper. We distinguish between slow (sub-critical) and fast crack growth regimes. We show that the fracture roughness is different in the two regimes using a new method based on a multifractal formalism recently developed in the turbulence literature. Deviations from monofractality also appear to be different in both regimes.
We study the roughness of a crack interface in a sheet of paper. We distinguish between slow (sub-critical) and fast crack growth regimes. We show that the fracture roughness is different in the two regimes using a new method based on a multifractal formalism recently developed in the turbulence literature. Deviations from monofractality also appear to be different in both regimes.
△ Less
Submitted 28 July, 2006; v1 submitted 27 July, 2006;
originally announced July 2006.
-
Gaussian Statistics of Fracture Surfaces
Authors:
Stéphane Santucci,
Joachim Mathiesen,
Knut Jørgen Måløy,
Alex Hansen,
Jean Schmittbuhl,
Loic Vanel,
Arnaud Delaplace,
Jan Øistein Haavig Bakke,
Purusattam Ray
Abstract:
We analyse the statistical distribution function for the height fluctuations of brittle fracture surfaces using extensive experimental data sampled on widely different materials and geometries. We compare a direct measurement of the distribution to a new analysis based on the structure functions. For length scales $δ$ larger than a characteristic scale $δ^*$, we find that the distribution of the…
▽ More
We analyse the statistical distribution function for the height fluctuations of brittle fracture surfaces using extensive experimental data sampled on widely different materials and geometries. We compare a direct measurement of the distribution to a new analysis based on the structure functions. For length scales $δ$ larger than a characteristic scale $δ^*$, we find that the distribution of the height increments $Δh = h(x+ δ) -h(x)$ is Gaussian. Self-affinity enters through the scaling of the standard deviation $σ$, which is proportional to $δ^ζ$ with a unique roughness exponent. Below the scale $δ^*$ we observe an effective multi-affine behavior of the height fluctuations and a deviation from a Gaussian distribution which is related to the discreteness of the measurement or of the material.
△ Less
Submitted 14 July, 2006;
originally announced July 2006.
-
Local waiting time fluctuations along a randomly pinned crack front
Authors:
Knut Jørgen Måløy,
Stéphane Santucci,
Jean Schmittbuhl,
Renaud Toussaint
Abstract:
The propagation of an interfacial crack along a heterogeneous weak plane of a transparent Plexiglas block is followed using a high resolution fast camera. We show that the fracture front dynamics is governed by local and irregular avalanches with very large size and velocity fluctuations. We characterize the intermittent dynamics observed, i.e. the local pinnings and depinnings of the crack fron…
▽ More
The propagation of an interfacial crack along a heterogeneous weak plane of a transparent Plexiglas block is followed using a high resolution fast camera. We show that the fracture front dynamics is governed by local and irregular avalanches with very large size and velocity fluctuations. We characterize the intermittent dynamics observed, i.e. the local pinnings and depinnings of the crack front which trigger a rich burst activity, by measuring the local waiting time fluctuations along the crack front during its propagation. The local front line velocity distribution deduced from the waiting time analysis exhibits a power law behavior, $P(v) \propto v^{-η}$ with $η= 2.55 \pm 0.15$, for velocities $v$ larger than the average front speed $<v>$. The burst size distribution is also a power law,
$P(S)\propto S^{-γ}$ with $γ=1.7 \pm 0.1$. Above a characteristic length scale of disorder $L_d \sim 15 μm$, the avalanche clusters become anisotropic, and the scaling of the anisotropy ratio provides an estimate of the roughness exponent of the crack front line, $H=0.66$, in close agreement with previous independent estimates.
△ Less
Submitted 22 December, 2005; v1 submitted 21 December, 2005;
originally announced December 2005.
-
Fracture Surfaces as Multiscaling Graphs
Authors:
Eran Bouchbinder,
Itamar Procaccia,
Stephane Santucci,
Loic Vanel
Abstract:
Fracture paths in quasi-two-dimenisonal (2D) media (e.g thin layers of materials, paper) are analyzed as self-affine graphs $h(x)$ of height $h$ as a function of length $x$. We show that these are multiscaling, in the sense that $n^{th}$ order moments of the height fluctuations across any distance $\ell$ scale with a characteristic exponent that depends nonlinearly on the order of the moment. Ha…
▽ More
Fracture paths in quasi-two-dimenisonal (2D) media (e.g thin layers of materials, paper) are analyzed as self-affine graphs $h(x)$ of height $h$ as a function of length $x$. We show that these are multiscaling, in the sense that $n^{th}$ order moments of the height fluctuations across any distance $\ell$ scale with a characteristic exponent that depends nonlinearly on the order of the moment. Having demonstrated this, one rules out a widely held conjecture that fracture in 2D belongs to the universality class of directed polymers in random media. In fact, 2D fracture does not belong to any of the known kinetic roughening models. The presence of multiscaling offers a stringent test for any theoretical model; we show that a recently introduced model of quasi-static fracture passes this test.
△ Less
Submitted 28 August, 2005; v1 submitted 7 August, 2005;
originally announced August 2005.
-
Subcritical statistics in rupture of fibrous materials: Experiments and model
Authors:
Stephane Santucci,
Loic Vanel,
Sergio Ciliberto
Abstract:
We study experimentally the slow growth of a single crack in a fibrous material and observe stepwise growth dynamics. We model the material as a lattice where the crack is pinned by elastic traps and grows due to thermally activated stress fluctuations. In agreement with experimental data we find that the distribution of step sizes follows sub-critical point statistics with a power law (exponent…
▽ More
We study experimentally the slow growth of a single crack in a fibrous material and observe stepwise growth dynamics. We model the material as a lattice where the crack is pinned by elastic traps and grows due to thermally activated stress fluctuations. In agreement with experimental data we find that the distribution of step sizes follows sub-critical point statistics with a power law (exponent 3/2) and a stress-dependent exponential cut-off diverging at the critical rupture threshold.
△ Less
Submitted 15 July, 2004;
originally announced July 2004.
-
Thermal activation of rupture and slow crack growth in a model of homogenous brittle materials
Authors:
S. Santucci,
L. Vanel,
A. Guarino,
R. Scorretti,
S. Ciliberto
Abstract:
Slow crack growth in a model of homogenous brittle elastic material is described as a thermal activation process where stress fluctuations allow to overcome a breaking threshold through a series of irreversible steps. We study the case of a single crack in a flat sheet for which analytical predictions can be made, and compare them with results from the equivalent problem of a 2D spring network.…
▽ More
Slow crack growth in a model of homogenous brittle elastic material is described as a thermal activation process where stress fluctuations allow to overcome a breaking threshold through a series of irreversible steps. We study the case of a single crack in a flat sheet for which analytical predictions can be made, and compare them with results from the equivalent problem of a 2D spring network. Good statistical agreement is obtained for the crack growth profile and final rupture time. The specific scaling of the energy barrier with stress intensity factor appears as a consequence of irreversibility. In addition, the model brings out a characteristic growth length whose physical meaning could be tested experimentally.
△ Less
Submitted 7 March, 2003;
originally announced March 2003.
-
Mechanism of formation of a 2D binary alloy
Authors:
L. Ottaviano,
G. Profeta,
L. Petaccia,
C. Nacci,
S. Santucci,
A. Pesci,
M. Pedio
Abstract:
Direct comparison of scanning tunneling microscopy and high resolution core level photo-emission experiments provides a rationale for the mechanism of formation of a two dimensional (2D) binary alloy (1/3 mono-layer (ML) Sn(1- x)Six/Si(111)-\sqrt3X\sqrt3R30). In contrast with recent theoretical predictions, the pure metal surface (x=0) results partitioned into two classes (2/9 ML and 1/9 ML) of…
▽ More
Direct comparison of scanning tunneling microscopy and high resolution core level photo-emission experiments provides a rationale for the mechanism of formation of a two dimensional (2D) binary alloy (1/3 mono-layer (ML) Sn(1- x)Six/Si(111)-\sqrt3X\sqrt3R30). In contrast with recent theoretical predictions, the pure metal surface (x=0) results partitioned into two classes (2/9 ML and 1/9 ML) of ad-atoms occupying non-equivalent T4 sites. During the formation of the alloy, Si ad-atoms preferably occupy the majority type adsorption site. This peculiar substitution mechanism leads to a mutual arrangement of ad-atoms which is not random even at room temperature, but shows the typical short range order universally observed in 2D and quasi 2D binary alloys
△ Less
Submitted 27 March, 2001;
originally announced March 2001.