-
Tilt-to-length coupling in LISA Pathfinder: long-term stability
Authors:
M Armano,
H Audley,
J Baird,
P Binetruy,
M Born,
D Bortoluzzi,
E Castelli,
A Cavalleri,
A Cesarini,
A M Cruise,
K Danzmann,
M de Deus Silva,
I Diepholz,
G Dixon,
R Dolesi,
L Ferraioli,
V Ferroni,
E D Fitzsimons,
M Freschi,
L Gesa,
D Giardini,
F Gibert,
R Giusteri,
C Grimani,
J Grzymisch
, et al. (53 additional authors not shown)
Abstract:
The tilt-to-length coupling during the LISA Pathfinder mission has been numerically and analytically modeled for particular timespans. In this work, we investigate the long-term stability of the coupling coefficients of this noise. We show that they drifted slowly (by 1\,$μ$m/rad and 6$\times10^{-6}$ in 100 days) and strongly correlated to temperature changes within the satellite (8\,$μ$m/rad/K an…
▽ More
The tilt-to-length coupling during the LISA Pathfinder mission has been numerically and analytically modeled for particular timespans. In this work, we investigate the long-term stability of the coupling coefficients of this noise. We show that they drifted slowly (by 1\,$μ$m/rad and 6$\times10^{-6}$ in 100 days) and strongly correlated to temperature changes within the satellite (8\,$μ$m/rad/K and 30$\times10^{-6}$/K). Based on analytical TTL coupling models, we attribute the temperature-driven coupling changes to rotations of the test masses and small distortions in the optical setup. Particularly, we show that LISA Pathfinder's optical baseplate was bent during the cooldown experiment, which started in late 2016 and lasted several months.
△ Less
Submitted 8 July, 2024;
originally announced July 2024.
-
Picometer Sensitive Prototype of the Optical Truss Interferometer for LISA
Authors:
Kylan Jersey,
Harold Hollis,
Han-Yu Chia,
Jose Sanjuan,
Paul Fulda,
Guido Mueller,
Felipe Guzman
Abstract:
The optical truss interferometer (OTI) is a contingent subsystem proposed for the LISA telescopes to aid in the verification of a $1 \frac{\mathrm{pm}}{\sqrt{\mathrm{Hz}}}$ optical path length stability. Each telescope would be equipped with three pairs of compact fiber-coupled units, each forming an optical cavity with a baseline proportional to the telescope length at different points around the…
▽ More
The optical truss interferometer (OTI) is a contingent subsystem proposed for the LISA telescopes to aid in the verification of a $1 \frac{\mathrm{pm}}{\sqrt{\mathrm{Hz}}}$ optical path length stability. Each telescope would be equipped with three pairs of compact fiber-coupled units, each forming an optical cavity with a baseline proportional to the telescope length at different points around the aperture. Employing a Pound-Drever-Hall approach to maintain a modulated laser field on resonance with each cavity, the dimensional stability of the telescope can be measured and verified. We have designed and developed prototype OTI units to demonstrate the capability of measuring stable structures, such as the LISA telescope, with a $1 \frac{\mathrm{pm}}{\sqrt{\mathrm{Hz}}}$ sensitivity using a set of freely mountable fiber-injected cavities. Aside from its initial motivation for the telescope, the OTI can also be readily integrated with other systems to aid in ground testing experiments. In this paper, we outline our experimental setup, measurement results, and analyses of the noise limitations.
△ Less
Submitted 26 June, 2024;
originally announced June 2024.
-
Tilt-to-length coupling in LISA Pathfinder: a data analysis
Authors:
M Armano,
H Audley,
J Baird,
P Binetruy,
M Born,
D Bortoluzzi,
E Castelli,
A Cavalleri,
A Cesarini,
A M Cruise,
K Danzmann,
M de Deus Silva,
I Diepholz,
G Dixon,
R Dolesi,
L Ferraioli,
V Ferroni,
E D Fitzsimons,
M Freschi,
L Gesa,
D Giardini,
F Gibert,
R Giusteri,
C Grimani,
J Grzymisch
, et al. (54 additional authors not shown)
Abstract:
We present a study of the tilt-to-length coupling noise during the LISA Pathfinder mission and how it depended on the system's alignment. Tilt-to-length coupling noise is the unwanted coupling of angular and lateral spacecraft or test mass motion into the primary interferometric displacement readout. It was one of the major noise sources in the LISA Pathfinder mission and is likewise expected to b…
▽ More
We present a study of the tilt-to-length coupling noise during the LISA Pathfinder mission and how it depended on the system's alignment. Tilt-to-length coupling noise is the unwanted coupling of angular and lateral spacecraft or test mass motion into the primary interferometric displacement readout. It was one of the major noise sources in the LISA Pathfinder mission and is likewise expected to be a primary noise source in LISA. We demonstrate here that a recently derived and published analytical model describes the dependency of the LISA Pathfinder tilt-to-length coupling noise on the alignment of the two freely falling test masses. This was verified with the data taken before and after the realignments performed in March (engineering days) and June 2016, and during a two-day experiment in February 2017 (long cross-talk experiment). The latter was performed with the explicit goal of testing the tilt-to-length coupling noise dependency on the test mass alignment. Using the analytical model, we show that all realignments performed during the mission were only partially successful and explain the reasons why. In addition to the analytical model, we computed another physical tilt-to-length coupling model via a minimising routine making use of the long cross-talk experiment data. A similar approach could prove useful for the LISA mission.
△ Less
Submitted 4 August, 2023;
originally announced August 2023.
-
Detection of Gravitational memory effect in LISA using triggers from ground-based detectors
Authors:
Sourath Ghosh,
Alexander Weaver,
Jose Sanjuan,
Paul Fulda,
Guido Mueller
Abstract:
The LIGO-Virgo-Kagra (LVK) collaboration has detected gravitational waves from 90 Compact Binary Coalescences. In addition to fortifying the linearized theory of General Relativity (GR), the statistical ensemble of detections also provides prospects of detecting nonlinear effects predicted by GR, one such prediction being the nonlinear gravitational memory effect. For detected stellar and intermed…
▽ More
The LIGO-Virgo-Kagra (LVK) collaboration has detected gravitational waves from 90 Compact Binary Coalescences. In addition to fortifying the linearized theory of General Relativity (GR), the statistical ensemble of detections also provides prospects of detecting nonlinear effects predicted by GR, one such prediction being the nonlinear gravitational memory effect. For detected stellar and intermediate mass compact binaries, the induced strain from the memory effect is one or two orders below the detector noise background. Additionally, since most of the energy is radiated at merger the strain induced by the memory effect resembles a step function at the merger time. These facts motivate the idea of coherently stacking up data streams from recorded GW events at these merger times so that the cumulative memory strain is detected with a sufficient SNR. GW detectors essentially record the integrated strain response at time scales of the round trip light travel time, making future space-based long arm interferometers like LISA ideal for detecting the memory effect at low frequencies. In this paper, we propose a method that uses the event catalog of ground-based detectors and searches for corresponding memory strains in the LISA data stream. Given LVK's O3 science run catalog, we use scaling arguments and assumptions on the source population models to estimate the run time required for LISA to accumulate a memory SNR of 5, using triggers from current and future ground-based detectors. Finally, we extend these calculations for using beyond LISA missions like ALIA, AMIGO, and Folkner to detect the gravitational memory effect. The results for LISA indicate a possible detection of the memory effect within the 10 year LISA mission lifetime and the corresponding results for beyond LISA missions are even more promising.
△ Less
Submitted 8 February, 2023;
originally announced February 2023.
-
Optomechanical accelerometers for geodesy
Authors:
Adam Hines,
Andrea Nelson,
Yanqi Zhang,
Guillermo Valdes,
Jose Sanjuan,
Jeremiah Stoddart,
Felipe Guzman
Abstract:
We present a novel optomechanical inertial sensor for low frequency applications and corresponding acceleration measurements. This sensor has a resonant frequency of 4.7Hz, a mechanical quality factor of 476k, a test mass of 2.6 gram, and a projected noise floor of approximately 5E-11 m s-2. per root-Hz at 1Hz. Such performance, together with its small size, low weight, reduced power consumption,…
▽ More
We present a novel optomechanical inertial sensor for low frequency applications and corresponding acceleration measurements. This sensor has a resonant frequency of 4.7Hz, a mechanical quality factor of 476k, a test mass of 2.6 gram, and a projected noise floor of approximately 5E-11 m s-2. per root-Hz at 1Hz. Such performance, together with its small size, low weight, reduced power consumption, and low susceptibility to environmental variables such as magnetic field or drag conditions makes it an attractive technology for future geodesy missions. In this paper, we present an experimental demonstration of low-frequency ground seismic noise detection by direct comparison with a commercial seismometer, anda data analysis algorithms for the identification, characterization, and correction of several noise sources.
△ Less
Submitted 7 September, 2022;
originally announced September 2022.
-
Calculating the precision of tilt-to-length coupling estimation and noise subtraction in LISA using Fisher information
Authors:
Daniel George,
Jose Sanjuan,
Paul Fulda,
Guido Mueller
Abstract:
Tilt-to-length (TTL) noise from angular jitter in LISA is projected to be the dominant noise source in the milli-Hertz band unless corrected in post-processing. The correction is only possible after removing the overwhelming laser phase noise using time-delay interferometry (TDI). We present here a frequency domain model that describes the effect of angular motion of all three spacecraft on the in…
▽ More
Tilt-to-length (TTL) noise from angular jitter in LISA is projected to be the dominant noise source in the milli-Hertz band unless corrected in post-processing. The correction is only possible after removing the overwhelming laser phase noise using time-delay interferometry (TDI). We present here a frequency domain model that describes the effect of angular motion of all three spacecraft on the interferometric signals after propagating through TDI. We then apply a Fisher information matrix analysis to this model to calculate the minimum uncertainty with which TTL coupling coefficients may be estimated. Furthermore, we show the impact of these uncertainties on the residual TTL noise in the gravitational wave readout channel, and compare it to the impact of the angular witness sensors' readout noise. We show that the residual TTL noise post-subtraction in the TDI variables for a case using the LISA angular jitter requirement and integration time of one day is limited to the 8\,pm/$\sqrt{\rm Hz}$ level by angular sensing noise. However, using a more realistic model for the angular jitter we find that the TTL coupling uncertainties are 70 times larger, and the noise subtraction is limited by these uncertainties to the 14\,pm/$\sqrt{\rm Hz}$ level.
△ Less
Submitted 31 August, 2022;
originally announced August 2022.
-
Arm locking performance with the new LISA design
Authors:
Sourath Ghosh,
Josep Sanjuan,
Guido Mueller
Abstract:
The Laser Interferometer Space Antenna (LISA) is a future space-based gravitational wave (GW) detector designed to be sensitive to sources radiating in the low frequency regime (0.1 mHz to 1 Hz). LISA's interferometer signals will be dominated by laser frequency noise which has to be suppressed by about 7 orders of magnitude using an algorithm called Time-Delay Interferometry (TDI). Arm locking ha…
▽ More
The Laser Interferometer Space Antenna (LISA) is a future space-based gravitational wave (GW) detector designed to be sensitive to sources radiating in the low frequency regime (0.1 mHz to 1 Hz). LISA's interferometer signals will be dominated by laser frequency noise which has to be suppressed by about 7 orders of magnitude using an algorithm called Time-Delay Interferometry (TDI). Arm locking has been proposed to reduce the laser frequency noise by a few orders of magnitude to reduce the potential risks associated with TDI. In this paper, we present an updated performance model for arm locking for the new LISA mission using 2.5 Gm arm lengths, the currently assumed clock noise, spacecraft motion, and shot noise. We also update the Doppler frequency pulling estimates during lock acquisition.
△ Less
Submitted 1 December, 2021;
originally announced December 2021.
-
A Simplified Gravitational Reference Sensor for Satellite Geodesy
Authors:
Anthony Davila Alvarez,
Aaron Knudtson,
Unmil Patel,
Joseph Gleason,
Harold Hollis,
Jose Sanjuan,
Neil Doughty,
Glenn McDaniel,
Jennifer Lee,
James Leitch,
Stephen Bennett,
Riccardo Bevilacqua,
Guido Mueller,
Robert Spero,
Brent Ware,
Peter Wass,
David Wiese,
John Ziemer,
John W. Conklin
Abstract:
We describe a Simplified Gravitational Reference Sensor (S-GRS), an ultra-precise inertial sensor for future Earth geodesy missions. These sensors are used to measure or compensate for all non-gravitational accelerations of the host spacecraft so that they can be removed in the data analysis to recover spacecraft motion due to Earth's gravity field, which is the main science observable. Low-low sa…
▽ More
We describe a Simplified Gravitational Reference Sensor (S-GRS), an ultra-precise inertial sensor for future Earth geodesy missions. These sensors are used to measure or compensate for all non-gravitational accelerations of the host spacecraft so that they can be removed in the data analysis to recover spacecraft motion due to Earth's gravity field, which is the main science observable. Low-low satellite-to-satellite tracking missions like GRACE-FO that utilize laser ranging interferometers are technologically limited by the acceleration noise performance of their electrostatic accelerometers, in addition to temporal aliasing associated with Earth's dynamic gravity field. The S-GRS is estimated to be at least 40 times more sensitive than the GRACE accelerometers and more than 500 times more sensitive if operated on a drag-compensated platform. The improved performance is enabled by increasing the mass of the sensor's test mass, increasing the gap between the test mass and its electrode housing, removing the small grounding wire used in the GRACE accelerometers and replacing them with a UV LED-based charge management system. This level of improvement allows future missions to fully take advantage of the sensitivity of the GRACE-FO laser Ranging Interferometer in the gravity recovery analysis. The S-GRS concept is a simplified version of the flight-proven LISA Pathfinder GRS. Our performance estimates are based on models vetted during the LISA Pathfinder flight and the expected Earth orbiting spacecraft environment based on flight data from GRACE-FO. The relatively low volume, mass, and a power consumption enables use of the S-GRS on ESPA-class microsatellites, reducing launch costs or enabling larger numbers of satellite pairs to be utilized to improve the temporal resolution of Earth gravity field maps.
△ Less
Submitted 12 January, 2022; v1 submitted 18 July, 2021;
originally announced July 2021.
-
On orbit performance of the GRACE Follow-On Laser Ranging Interferometer
Authors:
Klaus Abich,
Claus Braxmaier,
Martin Gohlke,
Josep Sanjuan,
Alexander Abramovici,
Brian Bachman Okihiro,
David C. Barr,
Maxime P. Bize,
Michael J. Burke,
Ken C. Clark,
Glenn de Vine,
Jeffrey A. Dickson,
Serge Dubovitsky,
William M. Folkner,
Samuel Francis,
Martin S. Gilbert,
Mark Katsumura,
William Klipstein,
Kameron Larsen,
Carl Christian Liebe,
Jehhal Liu,
Kirk McKenzie,
Phillip R. Morton,
Alexander T. Murray,
Don J. Nguyen
, et al. (58 additional authors not shown)
Abstract:
The Laser Ranging Interferometer (LRI) instrument on the Gravity Recovery and Climate Experiment (GRACE) Follow-On mission has provided the first laser interferometric range measurements between remote spacecraft, separated by approximately 220 km. Autonomous controls that lock the laser frequency to a cavity reference and establish the 5 degree of freedom two-way laser link between remote spacecr…
▽ More
The Laser Ranging Interferometer (LRI) instrument on the Gravity Recovery and Climate Experiment (GRACE) Follow-On mission has provided the first laser interferometric range measurements between remote spacecraft, separated by approximately 220 km. Autonomous controls that lock the laser frequency to a cavity reference and establish the 5 degree of freedom two-way laser link between remote spacecraft succeeded on the first attempt. Active beam pointing based on differential wavefront sensing compensates spacecraft attitude fluctuations. The LRI has operated continuously without breaks in phase tracking for more than 50 days, and has shown biased range measurements similar to the primary ranging instrument based on microwaves, but with much less noise at a level of $1\,{\rm nm}/\sqrt{\rm Hz}$ at Fourier frequencies above 100 mHz.
△ Less
Submitted 28 June, 2019;
originally announced July 2019.
-
Temperature stability in the sub-milliHertz band with LISA Pathfinder
Authors:
M. Armano,
H. Audley,
J. Baird,
P. Binetruy,
M. Born,
D. Bortoluzzi,
E. Castelli,
A. Cavalleri,
A. Cesarini,
A. M. Cruise,
K. Danzmann,
M. de Deus Silva,
I. Diepholz,
G. Dixon,
R. Dolesi,
L. Ferraioli,
V. Ferroni,
E. D. Fitzsimons,
M. Freschi,
L. Gesa,
F. Gibert,
D. Giardini,
R. Giusteri,
C. Grimani,
J. Grzymisch
, et al. (57 additional authors not shown)
Abstract:
LISA Pathfinder (LPF) was a technology pioneering mission designed to test key technologies required for gravitational wave detection in space. In the low frequency regime (milli-Hertz and below), where space-based gravitational wave observatories will operate, temperature fluctuations play a crucial role since they can couple into the interferometric measurement and the test masses' free-fall acc…
▽ More
LISA Pathfinder (LPF) was a technology pioneering mission designed to test key technologies required for gravitational wave detection in space. In the low frequency regime (milli-Hertz and below), where space-based gravitational wave observatories will operate, temperature fluctuations play a crucial role since they can couple into the interferometric measurement and the test masses' free-fall accuracy in many ways. A dedicated temperature measurement subsystem, with noise levels in 10$\,μ$K$\,$Hz$^{-1/2}$ down to $1\,$mHz was part of the diagnostics unit on board LPF. In this paper we report on the temperature measurements throughout mission operations, characterize the thermal environment, estimate transfer functions between different locations and report temperature stability (and its time evolution) at frequencies as low as 10$\,μ$Hz, where typically values around $1\,$K$\,$Hz$^{-1/2}$ were measured.
△ Less
Submitted 22 May, 2019;
originally announced May 2019.
-
Partial control of chaos: how to avoid undesirable behaviors with small controls in presence of noise
Authors:
Ruben Capeans,
Juan Sabuco Miguel A. F Sanjuan
Abstract:
The presence of a nonattractive chaotic set, also called chaotic saddle, in phase space implies the appearance of a finite time kind of chaos that is known as transient chaos. For a given dynamical system in a certain region of phase space with transient chaos, trajectories eventually abandon the chaotic region esca** to an external attractor, if no external intervention is done on the system. I…
▽ More
The presence of a nonattractive chaotic set, also called chaotic saddle, in phase space implies the appearance of a finite time kind of chaos that is known as transient chaos. For a given dynamical system in a certain region of phase space with transient chaos, trajectories eventually abandon the chaotic region esca** to an external attractor, if no external intervention is done on the system. In some situations, this attractor may involve an undesirable behavior, so the application of a control in the system is necessary to avoid it. Both, the nonattractive nature of transient chaos and eventually the presence of noise may hinder this task. Recently, a new method to control chaos called \emph{partial control} has been developed. The method is based on the existence of a set, called the safe set, that allows to sustain transient chaos by only using a small amount of control. The surprising result is that the trajectories can be controlled by using an amount of control smaller than the amount of noise affecting it. We present here a broad survey of results of this control method applied to a wide variety of dynamical systems. We also review here all the variations of the partial control method that have been developed so far. In all the cases various systems of different dimensionality are treated in order to see the potential of this method. We believe that this method is a step forward in controlling chaos in presence of disturbances.
△ Less
Submitted 22 March, 2018;
originally announced March 2018.
-
GIARPS@TNG GIANO-B & HARPS-N together for a wider wavelength range spectroscopy
Authors:
R. Claudi,
S. Benatti,
I. Carleo,
A. Ghedina,
J. Guerra,
G. Micela,
E. Molinari,
E. Oliva,
M. Rainer,
A. Tozzi,
C. Baffa,
A. Baruffolo,
N. Buchschacher,
M. Cecconi,
R. Cosentino,
D. Fantinel,
L. Fini,
F. Ghinassi,
E. Giani,
E. Gonzalez,
M. Gonzalez,
R. Gratton,
A. Harutyunyan,
N. Hernandez,
M. Lodi
, et al. (14 additional authors not shown)
Abstract:
Since 2012, thanks to the installation of the high resolution echelle spectrograph in the optical range HARPS-N, the Italian telescope TNG (La Palma) became one of the key facilities for the study of the extrasolar planets. In 2014 TNG also offered GIANO to the scientific community, providing a near-infrared (NIR) cross-dispersed echelle spectroscopy covering 0.97 - 2.45 micron at a resolution of…
▽ More
Since 2012, thanks to the installation of the high resolution echelle spectrograph in the optical range HARPS-N, the Italian telescope TNG (La Palma) became one of the key facilities for the study of the extrasolar planets. In 2014 TNG also offered GIANO to the scientific community, providing a near-infrared (NIR) cross-dispersed echelle spectroscopy covering 0.97 - 2.45 micron at a resolution of 50,000. GIANO, although designed for direct light-feed from the telescope at the Nasmyth-B focus, was provisionally mounted on the rotating building and connected via fibers to only available interface at the Nasmyth-A focal plane. The synergy between these two instruments is particularly appealing for a wide range of science cases, especially for the search for exoplanets around young and active stars and the characterisation of their atmosphere. Through the funding scheme "WOW" (a Way to Others Worlds), the Italian National Institute for Astrophysics (INAF) proposed to position GIANO at the focal station for which it was originally designed and the simultaneous use of these spectrographs with the aim to achieve high-resolution spectroscopy in a wide wavelength range (0.383-2.45 micron) obtained in a single exposure, giving rise to the project called GIARPS (GIANO-B & HARPS-N). Because of its characteristics GIARPS can be considered the first and unique worldwide instrument providing not only high resolution in a large wavelength band, but also a high precision radial velocity measurement both in the visible and in the NIR arm, since in the next future GIANO-B will be equipped with gas absorption cells.
△ Less
Submitted 18 July, 2017; v1 submitted 14 July, 2017;
originally announced July 2017.
-
GIARPS: the unique VIS-NIR high precision radial velocity facility in this world
Authors:
Riccardo Claudi,
Serena Benatti,
Ilaria Carleo,
Adriano Ghedina,
Emilio Molinari,
Ernesto Oliva,
Andrea Tozzi,
Andrea Baruffolo,
Massimo Cecconi,
Rosario Cosentino,
Daniela Fantinel,
Luca Fini,
Francesca Ghinassi,
Manuel Gonzalez,
Raffaele Gratton,
Jose Guerra,
Avet Harutyunyan,
Nauzet Hernandez,
Marcella Iuzzolino,
Marcello Lodi,
Luca Malavolta,
Jesus Maldonado,
Giusi Micela,
Nicoletta Sanna,
Jose Sanjuan
, et al. (8 additional authors not shown)
Abstract:
GIARPS (GIAno & haRPS) is a project devoted to have on the same focal station of the Telescopio Nazionale Galileo (TNG) both the high resolution spectrographs HARPS-N (VIS) and GIANO (NIR) working simultaneously. This could be considered the first and unique worldwide instrument providing cross-dispersed echelle spectroscopy at a high resolution (R=115,000 in the visual and R=50,000 in the IR) and…
▽ More
GIARPS (GIAno & haRPS) is a project devoted to have on the same focal station of the Telescopio Nazionale Galileo (TNG) both the high resolution spectrographs HARPS-N (VIS) and GIANO (NIR) working simultaneously. This could be considered the first and unique worldwide instrument providing cross-dispersed echelle spectroscopy at a high resolution (R=115,000 in the visual and R=50,000 in the IR) and over in a wide spectral range (0.383 - 2.45 micron) in a single exposure. The science case is very broad, given the versatility of such an instrument and the large wavelength range. A number of outstanding science cases encompassing mainly extra-solar planet science starting from rocky planet search and hot Jupiters, atmosphere characterization can be considered. Furthermore both instrument can measure high precision radial velocity by means the simultaneous thorium technique (HARPS - N) and absorbing cell technique (GIANO) in a single exposure. Other science cases are also possible. Young stars and proto-planetary disks, cool stars and stellar populations, moving minor bodies in the solar system, bursting young stellar objects, cataclysmic variables and X-ray binary transients in our Galaxy, supernovae up to gamma-ray bursts in the very distant and young Universe, can take advantage of the unicity of this facility both in terms of contemporaneous wide wavelength range and high resolution spectroscopy.
△ Less
Submitted 22 November, 2016;
originally announced November 2016.
-
Mathematical model of thermal shields for long-term stability optical resonators
Authors:
Josep Sanjuan,
Norman Gürlebeck,
Claus Braxmaier
Abstract:
Modern experiments aiming at tests of fundamental physics, like measuring gravitational waves or testing Lorentz Invariance with unprecedented accuracy, require thermal environments that are highly stable over long times. To achieve such a stability, the experiment including typically an optical resonator is nested in a thermal enclosure, which passively attenuates external temperature fluctuation…
▽ More
Modern experiments aiming at tests of fundamental physics, like measuring gravitational waves or testing Lorentz Invariance with unprecedented accuracy, require thermal environments that are highly stable over long times. To achieve such a stability, the experiment including typically an optical resonator is nested in a thermal enclosure, which passively attenuates external temperature fluctuations to acceptable levels. These thermal shields are usually designed using tedious numerical simulations or with simple analytical models. In this paper, we propose an accurate analytical method to estimate the performance of passive thermal shields in the frequency domain, which allows for fast evaluation and optimization. The model analysis has also unveil interesting properties of the shields, such as dips in the transfer function for some frequencies under certain combinations of materials and geometries. We validate the results by comparing them to numerical simulations performed with commercial software based on finite element methods.
△ Less
Submitted 25 September, 2015;
originally announced September 2015.
-
Heater induced thermal effects on the LTP dynamics
Authors:
Ferran Gibert,
Miquel Nofrarias,
Alberto Lobo,
Marc Díaz-Aguiló,
Ignacio Mateos,
Nikolaos Karnesis,
Josep Sanjuán,
Lluís Gesa,
Ivan lloro,
Víctor Martín
Abstract:
The STOC (Science and Technology Operations Centre) simulator of the LPF (LISA PathFinder) mission is intended to provide a validation tool for the mission operations tele-commanding chain, as well as for a deeper understanding of the underlying physical processes happening in the LTP (LISA Technology Package). Amongst the different physical effects that will appear onboard, temperature fluctuatio…
▽ More
The STOC (Science and Technology Operations Centre) simulator of the LPF (LISA PathFinder) mission is intended to provide a validation tool for the mission operations tele-commanding chain, as well as for a deeper understanding of the underlying physical processes happening in the LTP (LISA Technology Package). Amongst the different physical effects that will appear onboard, temperature fluctuations in the Electrode Housing (EH) could generate disturbances on the interferometer (IFO) readouts, therefore they must be known and controlled. In this article we report on the latest progress in the analysis at IEEC of the LTP response to thermal signals injected by means of heaters. More specifically, we determine the transfer functions relating heat input signals to forces on the Test Masses (TMs) in the LTP frequency band, from 1 mHz to 30 mHz. A complete thermal model of the entire LPF spacecraft plus payload, elaborated and maintained at European Space Technology Center (ESTEC), was used to obtain temperature distributions in response to heat inputs at prescribed spots (heaters), which are later processed to calculate the associated dynamical effects on the Test Masses.
△ Less
Submitted 11 December, 2013;
originally announced December 2013.
-
The Gravitational Universe
Authors:
The eLISA Consortium,
:,
P. Amaro Seoane,
S. Aoudia,
H. Audley,
G. Auger,
S. Babak,
J. Baker,
E. Barausse,
S. Barke,
M. Bassan,
V. Beckmann,
M. Benacquista,
P. L. Bender,
E. Berti,
P. Binétruy,
J. Bogenstahl,
C. Bonvin,
D. Bortoluzzi,
N. C. Brause,
J. Brossard,
S. Buchman,
I. Bykov,
J. Camp,
C. Caprini
, et al. (136 additional authors not shown)
Abstract:
The last century has seen enormous progress in our understanding of the Universe. We know the life cycles of stars, the structure of galaxies, the remnants of the big bang, and have a general understanding of how the Universe evolved. We have come remarkably far using electromagnetic radiation as our tool for observing the Universe. However, gravity is the engine behind many of the processes in th…
▽ More
The last century has seen enormous progress in our understanding of the Universe. We know the life cycles of stars, the structure of galaxies, the remnants of the big bang, and have a general understanding of how the Universe evolved. We have come remarkably far using electromagnetic radiation as our tool for observing the Universe. However, gravity is the engine behind many of the processes in the Universe, and much of its action is dark. Opening a gravitational window on the Universe will let us go further than any alternative. Gravity has its own messenger: Gravitational waves, ripples in the fabric of spacetime. They travel essentially undisturbed and let us peer deep into the formation of the first seed black holes, exploring redshifts as large as z ~ 20, prior to the epoch of cosmic re-ionisation. Exquisite and unprecedented measurements of black hole masses and spins will make it possible to trace the history of black holes across all stages of galaxy evolution, and at the same time constrain any deviation from the Kerr metric of General Relativity. eLISA will be the first ever mission to study the entire Universe with gravitational waves. eLISA is an all-sky monitor and will offer a wide view of a dynamic cosmos using gravitational waves as new and unique messengers to unveil The Gravitational Universe. It provides the closest ever view of the early processes at TeV energies, has guaranteed sources in the form of verification binaries in the Milky Way, and can probe the entire Universe, from its smallest scales around singularities and black holes, all the way to cosmological dimensions.
△ Less
Submitted 24 May, 2013;
originally announced May 2013.
-
State-space modelling for heater induced thermal effects on LISA Pathfinder's Test Masses
Authors:
Ferran Gibert,
Miquel Nofrarias,
Marc Diaz-Aguiló,
Alberto Lobo,
Nikolaos Karnesis,
Ignacio Mateos,
Josep Sanjuán,
Ivan Lloro,
Lluís Gesa,
Víctor Martín
Abstract:
The OSE (Offline Simulations Environment) simulator of the LPF (LISA Pathfinder) mission is intended to simulate the different experiments to be carried out in flight. Amongst these, the thermal diagnostics experiments are intended to relate thermal disturbances and interferometer readouts, thereby allowing the subtraction of thermally induced interferences from the interferometer channels. In thi…
▽ More
The OSE (Offline Simulations Environment) simulator of the LPF (LISA Pathfinder) mission is intended to simulate the different experiments to be carried out in flight. Amongst these, the thermal diagnostics experiments are intended to relate thermal disturbances and interferometer readouts, thereby allowing the subtraction of thermally induced interferences from the interferometer channels. In this paper we report on the modelling of these simulated experiments, including the parametrisation of different thermal effects (radiation pressure effect, radiometer effect) that will appear in the Inertial Sensor environment of the LTP (LISA Technology Package). We report as well how these experiments are going to be implemented in the LTPDA toolbox, which is a dedicated tool for LPF data analysis that will allow full traceability and reproducibility of the analysis thanks to complete recording of the processes.
△ Less
Submitted 30 July, 2012;
originally announced July 2012.
-
Demonstration of Time Delay Interferometry and Spacecraft Ranging in a Space-based Gravitational Wave Detector using the UF-LISA Interferometry Simulator
Authors:
Shawn J. Mitryk,
Josep Sanjuan,
Guido Mueller
Abstract:
Space-based gravitational-wave observatories such as the Laser Interferometer Space Antenna (LISA) use time-shifted and time-scaled linear combinations of differential laser-phase beat signals to cancel the otherwise overwhelming laser frequency noise. Nanosecond timing precision is needed to accurately form these Time-Delay Interferometry (TDI) combinations which defines a ~1 meter requirement on…
▽ More
Space-based gravitational-wave observatories such as the Laser Interferometer Space Antenna (LISA) use time-shifted and time-scaled linear combinations of differential laser-phase beat signals to cancel the otherwise overwhelming laser frequency noise. Nanosecond timing precision is needed to accurately form these Time-Delay Interferometry (TDI) combinations which defines a ~1 meter requirement on the inter-spacecraft ranging capability. The University of Florida Hardware-in-the-loop LISA Interferometry Simulator (UFLIS) has been used to test Time-Delay Interferometry in a configuration which incorporates variable delays, realistic Doppler shifts, and simulated gravitational-wave signals. The TDI 2.0 combinations are exploited to determine the time-changing delays with nanosecond accuracy using a TDI-ranging reference tone. These variable delays are used in forming the TDI combinations to achieve the LISA interferometry sensitivity resulting from 10 orders of magnitude laser frequency noise cancellation.
△ Less
Submitted 5 November, 2012; v1 submitted 9 May, 2012;
originally announced May 2012.
-
From laboratory experiments to LISA Pathfinder: achieving LISA geodesic motion
Authors:
F Antonucci,
M Armano,
H Audley,
G Auger,
M Benedetti,
P Binetruy,
C Boatella,
J Bogenstahl,
D Bortoluzzi,
P Bosetti,
N Brandt,
M Caleno,
A Cavalleri,
M Cesa,
M Chmeissani,
G Ciani,
A Conchillo,
G Congedo,
I Cristofolini,
M Cruise,
K Danzmann,
F De Marchi,
M Diaz-Aguilo,
I Diepholz,
G Dixon
, et al. (76 additional authors not shown)
Abstract:
This paper presents a quantitative assessment of the performance of the upcoming LISA Pathfinder geodesic explorer mission. The findings are based on the results of extensive ground testing and simulation campaigns using flight hardware and flight control and operations algorithms. The results show that, for the central experiment of measuring the stray differential acceleration between the LISA t…
▽ More
This paper presents a quantitative assessment of the performance of the upcoming LISA Pathfinder geodesic explorer mission. The findings are based on the results of extensive ground testing and simulation campaigns using flight hardware and flight control and operations algorithms. The results show that, for the central experiment of measuring the stray differential acceleration between the LISA test masses, LISA Pathfinder will be able to verify the overall acceleration noise to within a factor two of the LISA requirement at 1 mHz and within a factor 6 at 0.1 mHz. We also discuss the key elements of the physical model of disturbances, coming from LISA Pathfinder and ground measurement, that will guarantee the LISA performance.
△ Less
Submitted 20 January, 2011; v1 submitted 29 December, 2010;
originally announced December 2010.
-
The LISA PathFinder DMU and Radiation Monitor
Authors:
Priscilla Canizares,
Aleix Conchillo,
Marc Diaz--Aguilo,
Enrique Garcia-Berro,
Lluis Gesa,
Ferran Gibert,
Catia Grimani,
Ivan Lloro,
Alberto Lobo,
Ignacio Mateos,
Miquel Nofrarias,
Juan Ramos-Castro,
Josep Sanjuan,
Carlos F Sopuerta
Abstract:
The LISA PathFinder DMU (Data Management Unit) flight model was formally accepted by ESA and ASD on 11 February 2010, after all hardware and software tests had been successfully completed. The diagnostics items are scheduled to be delivered by the end of 2010. In this paper we review the requirements and performance of this instrumentation, specially focusing on the Radiation Monitor and the DMU,…
▽ More
The LISA PathFinder DMU (Data Management Unit) flight model was formally accepted by ESA and ASD on 11 February 2010, after all hardware and software tests had been successfully completed. The diagnostics items are scheduled to be delivered by the end of 2010. In this paper we review the requirements and performance of this instrumentation, specially focusing on the Radiation Monitor and the DMU, as well as the status of their programmed use during mission operations, on which work is ongoing at the time of writing.
△ Less
Submitted 28 September, 2010;
originally announced September 2010.
-
Extension of the LTP temperature diagnostics to the LISA band: first results
Authors:
J Sanjuan,
J Ramos-Castro,
A Lobo
Abstract:
High-resolution temperature measurements are required in the LTP, i.e., 10 uK/sqrt(Hz) from 1 mHz to 30 mHz. This has been already accomplished with thermistors and a suitable low noise electronics. However, the frequency range of interest for LISA goes down to 0.1 mHz. Investigations on the performance of temperature sensors and the associated electronics at frequencies around 0.1 mHz have been…
▽ More
High-resolution temperature measurements are required in the LTP, i.e., 10 uK/sqrt(Hz) from 1 mHz to 30 mHz. This has been already accomplished with thermistors and a suitable low noise electronics. However, the frequency range of interest for LISA goes down to 0.1 mHz. Investigations on the performance of temperature sensors and the associated electronics at frequencies around 0.1 mHz have been performed. Theoretical limits of the temperature measurement system and the practical on-ground limitations to test them are shown demonstrating that 1/f noise is not observed in thermistors even at frequencies around 0.1 mHz and amplitude levels of 10 uK/sqrt(Hz).
△ Less
Submitted 29 May, 2009;
originally announced May 2009.
-
ADC non-linear errors correction in thermal diagnostics for the LISA mission
Authors:
J. Sanjuan,
A. Lobo,
J. Ramos-Castro
Abstract:
Low-noise temperature measurements at frequencies in the milli-Hertz range are needed in the LISA and LISA PathFinder (LPF). The required temperature stability for LISA is around 10 uK/sqrt(Hz) at frequencies down to 0.1 mHz. In this paper we focus on the identification and reduction of a source of excess noise detected when measuring time-varying temperature signals. This is shown to be due to…
▽ More
Low-noise temperature measurements at frequencies in the milli-Hertz range are needed in the LISA and LISA PathFinder (LPF). The required temperature stability for LISA is around 10 uK/sqrt(Hz) at frequencies down to 0.1 mHz. In this paper we focus on the identification and reduction of a source of excess noise detected when measuring time-varying temperature signals. This is shown to be due to non-idealities in the ADC transfer curve, and degrades the measurement by about one order of magnitude in the measurement bandwidth when the measured temperature exhibits drifts of uK/s. In a suitable measuring system for the LISA mission, this noise needs to be reduced. Two different methods based on the same technique have been implemented, both consisting in the addition of dither signals out of band to mitigate the ADC non-ideality errors. Excess noise of this nature has been satisfactorily reduced by using these methods when measuring temperature ramps up to 10 uK/s .
△ Less
Submitted 19 May, 2009;
originally announced May 2009.
-
The diagnostics subsystem on board LISA PathFinder and LISA
Authors:
P Canizares,
A Conchillo,
E Garcia-Berro,
L Gesa,
C Grimani,
I Lloro,
A Lobo,
I Mateos,
M Nofrarias,
J Ramos-Castro,
J Sanjuan,
CF Sopuerta
Abstract:
The Data and Diagnostics Subsystem of the LTP hardware and software are at present essentially ready for delivery. In this presentation we intend to describe the scientific and technical aspects of this subsystem, which includes thermal diagnostics, magnetic diagnostics and a Radiation Monitor, as well as the prospects for their integration within the rest of the LTP. We also sketch a few lines…
▽ More
The Data and Diagnostics Subsystem of the LTP hardware and software are at present essentially ready for delivery. In this presentation we intend to describe the scientific and technical aspects of this subsystem, which includes thermal diagnostics, magnetic diagnostics and a Radiation Monitor, as well as the prospects for their integration within the rest of the LTP. We also sketch a few lines of progress recently opened up towards the more demanding diagnostics requirements which will be needed for LISA.
△ Less
Submitted 8 October, 2008;
originally announced October 2008.
-
Thermal diagnostic of the Optical Window on board LISA Pathfinder
Authors:
M. Nofrarias,
A. F. Garcia Marin,
A. Lobo,
G. Heinzel,
J. Ramos-Castro,
J. Sanjuan,
K. Danzmann
Abstract:
Vacuum conditions inside the LTP Gravitational Reference Sensor must comply with rather demanding requirements. The Optical Window (OW) is an interface which seals the vacuum enclosure and, at the same time, lets the laser beam go through for interferometric Metrology with the test masses. The OW is a plane-parallel plate clamped in a Titanium flange, and is considerably sensitive to thermal and…
▽ More
Vacuum conditions inside the LTP Gravitational Reference Sensor must comply with rather demanding requirements. The Optical Window (OW) is an interface which seals the vacuum enclosure and, at the same time, lets the laser beam go through for interferometric Metrology with the test masses. The OW is a plane-parallel plate clamped in a Titanium flange, and is considerably sensitive to thermal and stress fluctuations. It is critical for the required precision measurements, hence its temperature will be carefully monitored in flight. This paper reports on the results of a series of OW characterisation laboratory runs, intended to study its response to selected thermal signals, as well as their fit to numerical models, and the meaning of the latter. We find that a single pole ARMA transfer function provides a consistent approximation to the OW response to thermal excitations, and derive a relationship with the physical processes taking place in the OW. We also show how system noise reduction can be accomplished by means of that transfer function.
△ Less
Submitted 4 September, 2007;
originally announced September 2007.
-
In-flight Diagnostics in LISA Pathfinder
Authors:
Alberto Lobo,
Miquel Nofrarias,
Juan Ramos-Castro,
Josep Sanjuan,
Aleix Conchillo,
Jose Antonio Ortega,
Xevi Xirgu,
Henrique Araujo,
Cesar Boatella,
Mokhtar Chmeissani,
Catia Grimani,
Carles Puigdengoles,
Peter Wass,
Enrique Garcia-Berro,
Sergi Garcia,
Lluis Martinez,
Gustau Montero
Abstract:
LISA PathFinder (LPF) will be flown with the objective to test in space key technologies for LISA. However its sensitivity goals are, for good reason, one order of magnitude less than those which LISA will have to meet, both in drag-free and optical metrology requirements, and in the observation frequency band. While the expected success of LPF will of course be of itself a major step forward to…
▽ More
LISA PathFinder (LPF) will be flown with the objective to test in space key technologies for LISA. However its sensitivity goals are, for good reason, one order of magnitude less than those which LISA will have to meet, both in drag-free and optical metrology requirements, and in the observation frequency band. While the expected success of LPF will of course be of itself a major step forward to LISA, one might not forget that a further improvement by an order of magnitude in performance will still be needed. Clues for the last leap are to be derived from proper disentanglement of the various sources of noise which contribute to the total noise, as measured in flight during the PathFinder mission. This paper describes the principles, workings and requirements of one of the key tools to serve the above objective: the diagnostics subsystem. This consists in sets of temperature, magnetic field, and particle counter sensors, together with generators of controlled thermal and magnetic perturbations. At least during the commissioning phase, the latter will be used to identify feed-through coefficients between diagnostics sensor readings and associated actual noise contributions. A brief progress report of the current state of development of the diagnostics subsystem will be given as well.
△ Less
Submitted 23 December, 2006;
originally announced December 2006.
-
LISA and LISA PathFinder, the endeavour to detect low frequency GWs
Authors:
Henrique Araujo,
Cesar Boatella,
Mokhtar Chmeissani,
Aleix Conchillo,
Enrique Garcia-Berro,
Catia Grimani,
Wojtek Hajdas,
Alberto Lobo,
Lluis Martinez,
Miquel Nofrarias,
Jose Antonio Ortega,
Carles Puigdengoles,
Juan Ramos-Castro,
Josep Sanjuan,
Peter Wass,
Xevi Xirgu
Abstract:
This is a review about LISA and its technology demonstrator, LISA PathFinder. We first describe the conceptual problems which need to be overcome in order to set up a working interferometric detector of low frequency Gravitational Waves (GW), then summarise the solutions to them as currently conceived by the LISA mission team. This will show that some of these solutions require new technological…
▽ More
This is a review about LISA and its technology demonstrator, LISA PathFinder. We first describe the conceptual problems which need to be overcome in order to set up a working interferometric detector of low frequency Gravitational Waves (GW), then summarise the solutions to them as currently conceived by the LISA mission team. This will show that some of these solutions require new technological abilities which are still under development, and which need proper test before being fully implemented. LISA PathFinder (LPF) is the the testbed for such technologies. The final part of the paper will address the ideas and concepts behind the PathFinder as well as their impact on LISA.
△ Less
Submitted 23 December, 2006;
originally announced December 2006.
-
On-ground tests of LISA PathFinder thermal diagnostics system
Authors:
Alberto Lobo,
Miquel Nofrarias,
Juan Ramos-Castro,
Josep Sanjuan
Abstract:
Thermal conditions in the LTP, the LISA Technology Package, are required to be very stable, and in such environment precision temperature measurements are also required for various diagnostics objectives. A sensitive temperature gauging system for the LTP is being developed at IEEC, which includes a set of thermistors and associated electronics. In this paper we discuss the derived requirements…
▽ More
Thermal conditions in the LTP, the LISA Technology Package, are required to be very stable, and in such environment precision temperature measurements are also required for various diagnostics objectives. A sensitive temperature gauging system for the LTP is being developed at IEEC, which includes a set of thermistors and associated electronics. In this paper we discuss the derived requirements applying to the temperature sensing system, and address the problem of how to create in the laboratory a thermally quiet environment, suitable to perform meaningful on-ground tests of the system. The concept is a two layer spherical body, with a central aluminium core for sensor implantation surrounded by a layer of polyurethane. We construct the insulator transfer function, which relates the temperature at the core with the laboratory ambient temperature, and evaluate the losses caused by heat leakage through connecting wires. The results of the analysis indicate that, in spite of the very demanding stability conditions, a sphere of outer diameter of the order one metre is sufficient. We provide experimental evidence confirming the model predictions.
△ Less
Submitted 26 March, 2006;
originally announced March 2006.
-
Theoretical foundations for on-ground tests of LISA PathFinder thermal diagnostics
Authors:
Alberto Lobo,
Miquel Nofrarias,
Juan Ramos-Castro,
Josep Sanjuan
Abstract:
This paper reports on the methods and results of a theoretical analysis to design an insulator which must provide a thermally quiet environment to test on ground delicate temperature sensors and associated electronics. These will fly on board ESA's LISA PathFinder (LPF) mission as part of the thermal diagnostics subsystem of the LISA Test-flight Package (LTP). We evaluate the heat transfer funct…
▽ More
This paper reports on the methods and results of a theoretical analysis to design an insulator which must provide a thermally quiet environment to test on ground delicate temperature sensors and associated electronics. These will fly on board ESA's LISA PathFinder (LPF) mission as part of the thermal diagnostics subsystem of the LISA Test-flight Package (LTP). We evaluate the heat transfer function (in frequency domain) of a central body of good thermal conductivity surrounded by a layer of a very poorly conducting substrate. This is applied to assess the materials and dimensions necessary to meet temperature stability requirements in the metal core, where sensors will be implanted for test. The analysis is extended to evaluate the losses caused by heat leakage through connecting wires, linking the sensors with the electronics in a box outside the insulator. The results indicate that, in spite of the very demanding stability conditions, a sphere of outer diameter of the order one metre is sufficient.
△ Less
Submitted 23 January, 2006;
originally announced January 2006.