-
Laue Indexing with Optimal Transport
Authors:
Tomasz Kacprzak,
Stavros Samothrakitis,
Camilla Buhl Larsen,
Jaromír Kopeček,
Markus Strobl,
Efthymios Polatidis,
Guillaume Obozinski
Abstract:
Laue tomography experiments retrieve the positions and orientations of crystal grains in a polycrystalline samples from diffraction patterns recorded at multiple viewing angles. The use of a broad wavelength spectrum beam can greatly reduce the experimental time, but poses a difficult challenge for the indexing of diffraction peaks in polycrystalline samples; the information about the wavelength o…
▽ More
Laue tomography experiments retrieve the positions and orientations of crystal grains in a polycrystalline samples from diffraction patterns recorded at multiple viewing angles. The use of a broad wavelength spectrum beam can greatly reduce the experimental time, but poses a difficult challenge for the indexing of diffraction peaks in polycrystalline samples; the information about the wavelength of these Bragg peaks is absent and the diffraction patterns from multiple grains are superimposed. To date, no algorithms exist capable of indexing samples with more than about 500 grains efficiently. To address this need we present a novel method: Laue indexing with Optimal Transport (LaueOT). We create a probabilistic description of the multi-grain indexing problem and propose a solution based on Sinkhorn Expectation-Maximization method, which allows to efficiently find the maximum of the likelihood thanks to the assignments being calculated using Optimal Transport. This is a non-convex optimization problem, where the orientations and positions of grains are optimized simultaneously with grain-to-spot assignments, while robustly handling the outliers. The selection of initial prototype grains to consider in the optimization problem are also calculated within the Optimal Transport framework. LaueOT can rapidly and effectively index up to 1000 grains on a single large memory GPU within less than 30 minutes. We demonstrate the performance of LaueOT on simulations with variable numbers of grains, spot position measurement noise levels, and outlier fractions. The algorithm recovers the correct number of grains even for high noise levels and up to 70% outliers in our experiments. We compare the results of indexing with LaueOT to existing algorithms both on synthetic and real neutron diffraction data from well-characterized samples.
△ Less
Submitted 9 April, 2024;
originally announced April 2024.
-
HighNESS Conceptual Design Report: Volume I
Authors:
V. Santoro,
O. Abou El Kheir,
D. Acharya,
M. Akhyani,
K. H. Andersen,
J. Barrow,
P. Bentley,
M. Bernasconi,
M. Bertelsen,
Y. Bessler,
A. Bianchi,
G. Brooijmans,
L. Broussard,
T. Brys,
M. Busi,
D. Campi,
A. Chambon,
J. Chen,
V. Czamler,
P. Deen,
D. D. DiJulio,
E. Dian,
L. Draskovits,
K. Dunne,
M. El Barbari
, et al. (65 additional authors not shown)
Abstract:
The European Spallation Source, currently under construction in Lund, Sweden, is a multidisciplinary international laboratory. Once completed to full specifications, it will operate the world's most powerful pulsed neutron source. Supported by a 3 million Euro Research and Innovation Action within the EU Horizon 2020 program, a design study (HighNESS) has been completed to develop a second neutron…
▽ More
The European Spallation Source, currently under construction in Lund, Sweden, is a multidisciplinary international laboratory. Once completed to full specifications, it will operate the world's most powerful pulsed neutron source. Supported by a 3 million Euro Research and Innovation Action within the EU Horizon 2020 program, a design study (HighNESS) has been completed to develop a second neutron source located below the spallation target. Compared to the first source, designed for high cold and thermal brightness, the new source has been optimized to deliver higher intensity, and a shift to longer wavelengths in the spectral regions of cold (CN, 2--20\,Å), very cold (VCN, 10--120\,Å), and ultracold (UCN, ${>}\,{500}$\,Å) neutrons. The second source comprises a large liquid deuterium moderator designed to produce CN and support secondary VCN and UCN sources. Various options have been explored in the proposed designs, aiming for world-leading performance in neutronics. These designs will enable the development of several new instrument concepts and facilitate the implementation of a high-sensitivity neutron-antineutron oscillation experiment (NNBAR). This document serves as the Conceptual Design Report for the HighNESS project, representing its final deliverable.
△ Less
Submitted 28 May, 2024; v1 submitted 29 September, 2023;
originally announced September 2023.
-
Does a low-carrier density ferromagnet hold the key to understanding high temperature superconductors?
Authors:
Gabrielle Beaudin,
Alexandre Désilets-Benoit,
Andrea Daniele Bianchi,
Robert Arnold,
Stavros Samothrakitis,
Kilian D. Stenning,
Mark Laver,
Simon Gerber,
Nikola Anna Galvan Leo,
Jorge L. Gavilano,
Michel Kenzelmann,
Michael Nicklas
Abstract:
We conducted a small-angle neutron scattering experiments (SANS) on the ferromagnetic semi-metal EuB$_6$, where we observed direct evidence for the presence of magnetic polarons. We carried out SANS experiments over a large range of scattering vectors $|\vec{q}|$ from 0.006 to 0.140~Å$^{-1}$ and 2 to 60~K. Just above $T_{\mathrm{C}}$ our experiments show magnetic scattering intensity, which has a…
▽ More
We conducted a small-angle neutron scattering experiments (SANS) on the ferromagnetic semi-metal EuB$_6$, where we observed direct evidence for the presence of magnetic polarons. We carried out SANS experiments over a large range of scattering vectors $|\vec{q}|$ from 0.006 to 0.140~Å$^{-1}$ and 2 to 60~K. Just above $T_{\mathrm{C}}$ our experiments show magnetic scattering intensity, which has a Lorentzian dependence on the wave vector, which is characteristic for the presence of magnetic polarons. Below $T_{\mathrm{C}}$ the polarons merge and most of the observed intensity is due to scattering from domain walls.We were able to extract a correlation length $ξ$ which ranges from $100$ to $300$~Å for the size of the magnetic polarons. This size is much larger than one would expect for magnetic fluctuations, demonstrating the influence the magnetic polarons on the phase transition. We were able to extract a correlation length $ξ$ which ranges from $100$ to $300$~Å for the size of the magnetic polarons. This size is much larger than one would expect for magnetic fluctuations, demonstrating the influence the magnetic polarons on the phase transition.
△ Less
Submitted 21 October, 2022;
originally announced October 2022.
-
Development of a High Intensity Neutron Source at the European Spallation Source: The HighNESS project
Authors:
V. Santoro,
K. H. Andersen,
M. Bernasconi,
M. Bertelsen,
Y. Beßler,
D. Campi,
V. Czamler,
D. D. Di Julio,
E. Diane,
K. Dunne,
P. Fierlinger,
A. Gaye,
G. Gorini,
C. Happe,
T. Kittelmann,
E. B. Klinkby,
Z. Kokai,
R. Kolevatov,
B. Lauritzen,
R. Linander,
J. I. Marquez Damian,
B. Meirose,
F. Mezei,
D. Milstead,
G. Muhrer
, et al. (14 additional authors not shown)
Abstract:
The European Spallation Source (ESS), presently under construction in Lund, Sweden, is a multidisciplinary international laboratory that will operate the world's most powerful pulsed neutron source. Supported by a 3M Euro Research and Innovation Action within the EU Horizon 2020 program, a design study (HighNESS) is now underway to develop a second neutron source below the spallation target. Compa…
▽ More
The European Spallation Source (ESS), presently under construction in Lund, Sweden, is a multidisciplinary international laboratory that will operate the world's most powerful pulsed neutron source. Supported by a 3M Euro Research and Innovation Action within the EU Horizon 2020 program, a design study (HighNESS) is now underway to develop a second neutron source below the spallation target. Compared to the first source, located above the spallation target and designed for high cold and thermal brightness, the new source will provide higher intensity, and a shift to longer wavelengths in the spectral regions of cold (2 /- 20 Å), very cold (VCN, 10 /- 120 Å), and ultra cold (UCN, > 500 Å) neutrons. The core of the second source will consist of a large liquid deuterium moderator to deliver a high flux of cold neutrons and to serve secondary VCN and UCN sources, for which different options are under study. The features of these new sources will boost several areas of condensed matter research and will provide unique opportunities in fundamental physics. Part of the HighNESS project is also dedicated to the development of future instruments that will make use of the new source and will complement the initial suite of instruments in construction at ESS. The HighNESS project started in October 2020. In this paper, the ongoing developments and the results obtained in the first year are described.
△ Less
Submitted 8 April, 2022;
originally announced April 2022.
-
Characterizing accelerated precipitation in proton irradiated steel
Authors:
Mark Laver,
Brian J. Connolly,
Christopher Cooper,
Joachim Kohlbrecher,
Stavros Samothrakitis,
Keith Wilford
Abstract:
Ion irradiation provides a promising substitute to neutron tests for investigating the effects of radiation on materials for fission and fusion reactor plants. Here we show proton irradiation can quantitatively reproduce precipitation that leads to embrittlement in reactor pressure vessel steels, at dose rates 10,000 times greater than experienced in fission reactor operation. Small-angle neutron…
▽ More
Ion irradiation provides a promising substitute to neutron tests for investigating the effects of radiation on materials for fission and fusion reactor plants. Here we show proton irradiation can quantitatively reproduce precipitation that leads to embrittlement in reactor pressure vessel steels, at dose rates 10,000 times greater than experienced in fission reactor operation. Small-angle neutron scattering (SANS) is used to characterize precipitate size distributions in copper-containing steels irradiated to average doses of approx. 7 mdpa with 5 MeV protons. Comparing our results with the literature on reactor pressure vessel steels containing at least 1 at.% nickel, we find a power-law scaling of dose with exponent 0.25--0.30 accounts for the effects of dose rate on precipitate volume fraction over 6 orders of magnitude in dose rate. In conjunction with dose rate, carbon is identified as performing a leading role in determining precipitate sizes, adding to the known effects of nickel, manganese and irradiation temperature. We discuss the composition of precipitates inferred from SANS, taking previous atom probe tomography studies into consideration.
△ Less
Submitted 20 August, 2021;
originally announced August 2021.
-
Laue three dimensional neutron diffraction
Authors:
Marc Raventós,
Michael Tovar,
Marisa Medarde,
Tian Shang,
Markus Strobl,
Stavros Samothrakitis,
Ekaterina Pomjakushina,
Christian Grünzweig,
Søren Schmidt
Abstract:
This article presents a measurement technique and data analysis tool to perform 3D grain distribution map** and indexing of oligocrystalline samples using neutrons: Laue three-dimensional neutron diffraction (Laue3DND). The approach builds on forward modelling used for correlation and multiple fitting of the measured diffraction spots relative to individual grains.This enables not only to identi…
▽ More
This article presents a measurement technique and data analysis tool to perform 3D grain distribution map** and indexing of oligocrystalline samples using neutrons: Laue three-dimensional neutron diffraction (Laue3DND). The approach builds on forward modelling used for correlation and multiple fitting of the measured diffraction spots relative to individual grains.This enables not only to identify individual grains, but also their position and orientation in the sample. The feasibility and performance of the Laue3DND approach are tested using multi-grain synthetic datasets from cubic (α-Fe) and tetragonal(YBaCuFeO5) symmetries. Next, experimental results from two data sets measured at the FALCON instrument of Helmholtz-Zentrum Berlin are presented: A cylindrical alpha iron (α-Fe) reference sample with 5 mm diameter and 5 mm height, as well as a 2 mm3 layered perovskite (YBaCuFeO5). Using Laue3DND, we were able to retrieve the position and orientation of 97 out of 100 grains from a syntheticα-Fe data set, as well as 24 and 9 grains respectively from theα-Fe and YBaCuFeO5 sample measured at FALCON. Results from the synthetic tests also indicate that Laue3DND is capable of indexing 10 out of 10 grains for both symmetries in two extreme scenarios: using only 6 Laue projections and using 360 projections with extremely noisy data. The precision achieved in terms of spatial and orientation resolution for the current version of the method is 430μm and 1 degree respectively. Based on these results obtained, we are confident to present a tool that expands the capabilities of standard Laue diffraction, providing the number, position, orientation and relative size of grains in oligocrystalline samples.
△ Less
Submitted 8 February, 2019;
originally announced February 2019.
