Showing 1–17 of 17 results for author: Salmanogli, A

Design of Fully Integrated 45 nm CMOS System-on-Chip Receiver for Readout of Transmon Qubit

Authors: Ahmad Salmanogli, Amine Bermak

Abstract: This study unveils a comprehensive design strategy, intricately addressing the realization of transmon qubits, the design of Josephson parametric amplifiers, and the development of an innovative fully integrated receiver dedicated to sensing ultra-low-level quantum signals. Quantum theory takes center stage, leveraging the Lindblad master and quantum Langevin equations to design the transmon qubit… ▽ More This study unveils a comprehensive design strategy, intricately addressing the realization of transmon qubits, the design of Josephson parametric amplifiers, and the development of an innovative fully integrated receiver dedicated to sensing ultra-low-level quantum signals. Quantum theory takes center stage, leveraging the Lindblad master and quantum Langevin equations to design the transmon qubit and Josephson parametric amplifier as open quantum systems. The mentioned quantum devices engineering integrated with the design of a fully integrated 45 nm CMOS system-on-chip receiver, weaves together a nuanced tapestry of quantum and classical elements. On one hand, for the transmon qubit and parametric amplifier operating at 10 mK, critical quantum metrics including entanglement, Stoke projector probabilities, and parametric amplifier gain are calculated. On the other hand, the resulting receiver is a symphony of high-performance elements, featuring a wide-band low-noise amplifier with a 0.8 dB noise figure and ~37 dB gains, a sweepable 5.0 GHz sinusoidal wave generator via the voltage-controlled oscillator, and a purpose-designed mixer achieving C-band to zero-IF conversion. Intermediate frequency amplifier, with a flat gain of around 26 dB, and their low-pass filters, generate a pure sinusoidal wave at zero-IF, ready for subsequent processing at room temperature. This design achieves an impressive balance, with low power consumption (~122 mW), a noise figure of ~0.9 dB, high gain (~130 dB), a wide bandwidth of 3.6 GHz, and compact dimensions (0.54*0.4 mm^2). The fully integrated receiver capability to read out at least 90 qubits positions this design for potential applications in quantum computing. Validation through post-simulations at room temperature underscores the promising and innovative nature of this design. △ Less

Submitted 8 January, 2024; originally announced January 2024.

MSC Class: 81Pxx; 81Txx; 81Sxx

Quantum Parametric Amplification and NonClassical Correlations due to 45 nm nMOS Circuitry Effect

Authors: Ahmad Salmanogli, Amine Bermak

Abstract: This study unveils a groundbreaking exploration of using semiconductor technology in quantum circuitry. Leveraging the unique operability of 45 nm CMOS technology at deep cryogenic temperatures (~ 300 mK), a novel quantum electronic circuit is meticulously designed. Through the intricate coupling of two matching circuits via a 45 nm nMOS transistor, operating as an open quantum system, the circuit… ▽ More This study unveils a groundbreaking exploration of using semiconductor technology in quantum circuitry. Leveraging the unique operability of 45 nm CMOS technology at deep cryogenic temperatures (~ 300 mK), a novel quantum electronic circuit is meticulously designed. Through the intricate coupling of two matching circuits via a 45 nm nMOS transistor, operating as an open quantum system, the circuit quantum Hamiltonian and the related Heisenberg-Langevin equation are derived, setting the stage for a comprehensive quantum analysis. Central to this investigation are three pivotal coefficients derived, which are the coupling between the coupled oscillator charge and flux operators through the internal circuit of the transistor. These coefficients emerge as critical determinants, sha** both the circuit potential as a parametric amplifier and its impact on quantum properties. The study unfolds a delicate interplay between these coefficients, showcasing their profound influence on quantum discord and the gain of the parametric amplifier. Consequently, the assimilation of 45 nm CMOS technology with quantum circuitry makes it possible to potentially bridge the technological gap in quantum computing applications, where the parametric amplifier is a necessary and critical device. The designed novel quantum device serves not only as a quantum parametric amplifier to amplify quantum signals but also enhances the inherent quantum properties of the signals such as non-classicality. Therefore, one can create an effective parametric amplifier that simultaneously improves the quantum characteristics of the signals. The more interesting result is that if such a theory becomes applicable, the circuit implemented in the deep-cryogenic temperature can be easily compatible with the next step of circuitry while kee** the same electronic features compatibility with the quantum processor. △ Less

Submitted 25 October, 2023; originally announced October 2023.

Comments: 11 pages, 5 figures

Technical Review of Four Different Quantum Systems: Comparative Analysis of Quantum Correlation, Signal-to-Noise Ratio, and Fidelity

Authors: Ahmad Salmanogli, Vahid Sharif Sirat

Abstract: This technical review examines the different methods and approaches have been used to create microwave modes of quantum correlation. Specifically, we consider the electro-opto-mechanical, optoelectronics, 4-coupled qubits, and InP HEMT coupled with two external oscillator methods, and evaluate their effectiveness for quantum applications. Since these systems are open quantum systems, they interact… ▽ More This technical review examines the different methods and approaches have been used to create microwave modes of quantum correlation. Specifically, we consider the electro-opto-mechanical, optoelectronics, 4-coupled qubits, and InP HEMT coupled with two external oscillator methods, and evaluate their effectiveness for quantum applications. Since these systems are open quantum systems, they interact with their own environment medium and thermal bath. To ensure an accurate comparison, we analyzed all of the systems using the same criteria. Thus, at first all systems are introduced briefly, then the total Hamiltonian is theoretically derived, and finally, the system dynamics are analogously analyzed using the Lindblad master equation. We then calculate the quantum correlation between cavity modes, signal-to-noise ratio, and fidelity for each system to evaluate their performance. The results show that the strength and nature of the calculated quantities vary among the systems. An interesting result is the emergence of mixing behavior in the quantum correlation and signal-to-noise ratio for systems that use different cavities. It also identified a significant similarity between the 4-coupled qubits and InP HEMT coupled with external oscillators methods, where an avoided-level crossing occurs in the quantum correlation. Additionally, the study results reveal a high consistency between the signal-to-noise ratio and classical discord. △ Less

Submitted 19 April, 2024; v1 submitted 2 May, 2023; originally announced May 2023.

Quantum Correlation at Zero-IF: InP HEMT Circuitry Effect

Authors: Ahmad Salmanogli

Abstract: The quantum correlation between microwave modes in an RF electronic circuit is analyzed and studied. An open quantum system operating at 4.2 K is designed in which InP HEMT as the nonlinear component couples two external oscillators to each other. The quantum theory is applied to completely analyze the system, by which the related quantum Hamiltonian containing all noise sources is derived. The Li… ▽ More The quantum correlation between microwave modes in an RF electronic circuit is analyzed and studied. An open quantum system operating at 4.2 K is designed in which InP HEMT as the nonlinear component couples two external oscillators to each other. The quantum theory is applied to completely analyze the system, by which the related quantum Hamiltonian containing all noise sources is derived. The Lindblad Master equation is used to analyze the time evolution of the expanded closed system that covers the environmental effects. In the following, the state of the system defined is determined in terms of the ensemble average state using the density matrix; then, the ensemble average of the different operators is calculated. Accordingly, the covariance matrix of the quantum system is derived, and the quantum discord as a key quantity to determine the quantum correlation is calculated. As an interesting point, the results show that InP HEMT mixes two coupling oscillator modes so that the quantum correlation is created at different frequency productions such as 2nd, 3rd, and 5th. The harmonics suitable for sampling and digitalization is the zero-IF (downside of 2nd harmonics) band at which the quantum correlation is generated. Another point is that there is no quantum correlation at the frequency resonance of each oscillator coupled to InP HEMT. △ Less

Submitted 26 January, 2023; originally announced January 2023.

Quantum Correlation of Microwave Two-mode Squeezed State Generated by Nonlinearity of InP HEMT

Authors: Ahmad Salmanogli

Abstract: This study significantly concentrates on cryogenic InP HEMT high-frequency circuit analysis using quantum theory to find how the transistor nonlinearity can affect the quantum correlation of the modes generated in the circuit. Firstly, the total Hamiltonian of the circuit is derived, and the dynamic equation of the motion contributed is examined using the Heisenberg-Langevin equation. Using the no… ▽ More This study significantly concentrates on cryogenic InP HEMT high-frequency circuit analysis using quantum theory to find how the transistor nonlinearity can affect the quantum correlation of the modes generated in the circuit. Firstly, the total Hamiltonian of the circuit is derived, and the dynamic equation of the motion contributed is examined using the Heisenberg-Langevin equation. Using the nonlinear Hamiltonian, some components are attached to the intrinsic internal circuit of InP HEMT to fully address the circuit characteristics. The components attached are arisen due to the nonlinearity effects. As a result, the theoretical calculations show that the states generated in the circuit are mixed, and no pure state is produced. Accordingly, the modified circuit generates the two-mode squeezed thermal state, which means one can focus on calculating the Gaussian quantum discord to evaluate quantum correlation. It is also found that the nonlinearity factors (addressed as the nonlinear components in the circuit) can intensely influence the squeezed thermal state by which the quantum discord is changed. Finally, as the primary point, it is concluded that although it is possible to enhance the quantum correlation between modes by engineering the nonlinear components; however, quantum discord greater than unity, entangled microwave photons, seems a challenging task since InP HEMT operates at 4.2 K. △ Less

Submitted 3 November, 2022; originally announced November 2022.

Qubit Coupling to Reservoir Modes: Engineering the Circuitry to Enhance the Coherence Time

Authors: Ahmad Salmanogli

Abstract: In this study, a circuitry model of the coupling of a qubit to reservoir modes is defined to clearly determine the effect of the reservoir modes on the qubit decay and dephasing rates. The main goal is to theoretically calculate the dephasing and decay rate of a qubit, particularly due to the circuitry effect. Firstly, the Hamiltonian of the system (coupling of a qubit to the reservoir modes) is d… ▽ More In this study, a circuitry model of the coupling of a qubit to reservoir modes is defined to clearly determine the effect of the reservoir modes on the qubit decay and dephasing rates. The main goal is to theoretically calculate the dephasing and decay rate of a qubit, particularly due to the circuitry effect. Firstly, the Hamiltonian of the system (coupling of a qubit to the reservoir modes) is defined and used to derive the time evolution of the density matrix for the qubit energy levels. By calculating the qubit level density evolutions, one can estimate at which frequency the maximum coupling occurs and, in addition, knows about the role of the electromagnetic bias in the qubit. Secondly, the qubit decay rate is theoretically derived. The results show that the decay rate is strongly affected by circuitry elements such as the qubit capacitor and, more importantly, the coupling capacitor between the qubit and the reservoir modes. As the main result, it is shown that the slight decrease in the coupling capacitors significantly affects the relaxation time even more than the qubit capacitor. Consequently, the dephasing rate, which is the effect of the reservoir modes on the transition frequency of the qubit, is theoretically examined using the Heisenberg-Langevin equation. Finally, by transforming the Heisenberg-Langevin equations into the Fourier domain, the number of photons of the qubit due to coupling to reservoir modes are calculated. This is considered to be the photons generated in the qubit owing to the noise effect. This term significantly influences the qubit coherence time. △ Less

Submitted 26 May, 2022; originally announced May 2022.

MSC Class: 81-XX

Squeezed States Generation using Cryogenic InP HEMT Transistor Nonlinearity

Authors: Ahmad Salmanogli

Abstract: This study focuses on generating and manipulating squeezed states with two external oscillators coupled by an InP HEMT transistor operating at cryogenic temperatures. First, the small-signal nonlinear model of the transistor at high frequency at 5 K is analyzed using quantum theory, and the related Lagrangian is theoretically derived. Subsequently, the total quantum Hamiltonian of the system is de… ▽ More This study focuses on generating and manipulating squeezed states with two external oscillators coupled by an InP HEMT transistor operating at cryogenic temperatures. First, the small-signal nonlinear model of the transistor at high frequency at 5 K is analyzed using quantum theory, and the related Lagrangian is theoretically derived. Subsequently, the total quantum Hamiltonian of the system is derived using Legendre transformation. The Hamiltonian of the system includes linear and nonlinear terms, by which the effects on the time evolution of the states are studied. The main result shows that the squeezed state can be generated owing to the nonlinearity of the transistor, and more importantly, it can be manipulated by some specific terms introduced in the nonlinear Hamiltonian. In fact, the nonlinearity of the transistors induces some effects such as capacitance, inductance, and second-order transconductance, by which the properties of the external oscillators are changed. These changes may lead to squeezing or manipulation of the parameters related to squeezing in the oscillators. In addition, it is theoretically derived that the circuit can generate two-mode squeezing. Finally, second-order correlation (photon counting statistics) is studied as a complementary task, and the results demonstrate that the designed circuit exhibits antibunching, where the quadrature operator shows squeezing behavior. △ Less

Submitted 18 April, 2022; originally announced April 2022.

Entangled Microwave Photons Generation using Cryogenic Low Noise Amplifier (Transistor Nonlinearity Effects)

Authors: Ahmad Salmanogli

Abstract: This article mainly focuses on one of the important phenomena in the quantum realm called entanglement. It is clear that entanglement created due to the nonlinearity property has been arisen by some different methods. This study in contrast uses a unique approach in which a cryogenic low noise amplifier is designed and using the transistor nonlinearity effect (third-order nonlinearity) entangled m… ▽ More This article mainly focuses on one of the important phenomena in the quantum realm called entanglement. It is clear that entanglement created due to the nonlinearity property has been arisen by some different methods. This study in contrast uses a unique approach in which a cryogenic low noise amplifier is designed and using the transistor nonlinearity effect (third-order nonlinearity) entangled microwave photons are created. It is supposed that the low noise amplifier contains two coupled oscillators resonating with different frequencies. The mentioned oscillators are coupled to each other through the gate-drain capacitor and nonlinear transconductance as an important factor by which the entangled microwave photons are strongly manipulated. For entanglement analysis, the Hamiltonian of the system is initially derived, then using the dynamic equation of motion of the designed amplifier the oscillator's number of photons and also the phase sensitive cross-correlation factor are calculated in Fourier domain to calculate the entanglement metric. As a main conclusion, the study shows that the designed low noise amplifier using nonlinearity of the transistor has the ability to generate the entangled microwave photons at very low intrinsic transconductance and more importantly when the noise figure is strongly minimized. Additionally, a cryogenic low noise amplifier is designed and simulated to verify that it is possible to achieve an ultra-low noise figure by which the probability of the generation of the entangled microwave photons is increased. △ Less

Submitted 13 January, 2022; originally announced January 2022.

Design of Ultra-Low Noise Amplifier for Quantum Applications (QLNA)

Authors: Ahmad Salmanogli, Vahid Sharif Sirat

Abstract: The present article primarily focuses on the design of an ultra-low-noise amplifier specifically tailored for quantum applications. The circuit design places a significant emphasis on improving the noise figure, as quantum-associated applications require the circuit's noise temperature to be around 0.4 K. This requirement aims to achieve performance comparable to the Josephson Junction amplifier.… ▽ More The present article primarily focuses on the design of an ultra-low-noise amplifier specifically tailored for quantum applications. The circuit design places a significant emphasis on improving the noise figure, as quantum-associated applications require the circuit's noise temperature to be around 0.4 K. This requirement aims to achieve performance comparable to the Josephson Junction amplifier. Although this task presents considerable challenges, the work concentrates on engineering the circuit to minimize mismatch and reflection coefficients, while simultaneously enhancing circuit transconductance. These efforts aim to improve the noise figure as efficiently as possible. The results of this study indicate the possibility of achieving a noise figure of approximately 0.009 dB for a unique circuit design operating at 10 K. In a departure from traditional approaches, this study employs quantum mechanical theory to analyze the circuit comprehensively. By employing quantum theory, the researchers derive relationships that highlight the crucial quantities upon which the circuit design should focus to optimize the noise figure. For example, the circuit's gain power, which depends on the circuit's photonic modes, is theoretically derived and found to affect the noise figure directly. Ultimately, by merging quantum theory with engineering approaches, this study successfully designs a highly efficient circuit that significantly minimizes the noise figure in a quantum application setting. △ Less

Submitted 17 February, 2024; v1 submitted 30 November, 2021; originally announced November 2021.

Entanglement Engineering by Transmon Qubit in a Circuit QED

Authors: Ahmad Salmanogli

Abstract: this study significantly emphasizes on the entanglement engineering using a transmon qubit. A transmon qubit is created with two superconducting islands coupled with two Josephson Junction embedded into a transmission line. The transmon qubit energies are manipulated through its coupling to the transmission line. The key factor here is the coupling factor between transmission line and qubit by whi… ▽ More this study significantly emphasizes on the entanglement engineering using a transmon qubit. A transmon qubit is created with two superconducting islands coupled with two Josephson Junction embedded into a transmission line. The transmon qubit energies are manipulated through its coupling to the transmission line. The key factor here is the coupling factor between transmission line and qubit by which the quantum features of the system such as transmon decay rate, energy dispersion, and related coherence time are controlled. To complete knowledge about the design, the system is quantum mechanically analyzed and the related Hamiltonian is derived. Accordingly, the dynamics equation of motions is derived and so the energy dispersion and the coupled system coherence time are investigated. The system engineering should be established in such a way that satisfies the energy dispersion and the coherence time. However, to analyze the entanglement between modes, it needs to calculate the number of photons of the transmission lines and the transmon qubit, and also the phase sensitive cross-correlation. The important section of this study emphasizes on engineering the coupling between the transmon qubit and transmission line to enhance the entanglement. The results show that around the Josephson Junction location where the more coupling is established the more entanglement between modes is created. △ Less

Submitted 1 September, 2021; originally announced September 2021.

Comments: 21 pages, 5 figures

MSC Class: 81Pxx

An Exact Method using Quantum Theory to Calculate the Noise Figure in a Low Noise Amplifier

Authors: Ahmad Salmanogli

Abstract: In this article, a low noise amplifier is quantum mechanically analyzed to study the behavior of the noise figure. The analysis view is changed from the classic to quantum, because using quantum theory produces some degrees of freedom, which may be ignored when a circuit is analyzed using a classical theory. For this reason, the associated Lagrangian is initially derived for the circuit and then u… ▽ More In this article, a low noise amplifier is quantum mechanically analyzed to study the behavior of the noise figure. The analysis view is changed from the classic to quantum, because using quantum theory produces some degrees of freedom, which may be ignored when a circuit is analyzed using a classical theory. For this reason, the associated Lagrangian is initially derived for the circuit and then using Legendre transformation and canonical quantization procedure the classical and quantum Hamiltonian are derived, respectively. Consequently, the dynamic equation of motion of the circuit is introduced by which all of the circuit measurable observations such as voltage and current fluctuations are calculated. As an interesting point of this study, the low noise amplifier is deliberately supposed as two oscillators connecting to each other sharing the mutual specifications and accordingly the voltage and current are expressed in terms of the oscillators photon number. As a result, one can analyze the critical quantity such as the noise figure in terms of the oscillators photon number and also the photons coupling between oscillators. The latter mentioning term is considered as a factor to engineering the amplifier critical quantities. Additionally, the considered circuit is designed and classically simulated to testify the derived results using the quantum theory. △ Less

Submitted 11 August, 2021; originally announced August 2021.

Comments: 10

MSC Class: J.2 ACM Class: J.2

Optoelectronic based Quantum Radar: Entanglement Sustainability Improving at High Temperature

Authors: Ahmad Salmanogli, Dincer Gokcen

Abstract: In this study, the main focus is laid on the design of the optoelectronic quantum illumination system to enhance the system performance, such as operation at high temperature and confinement of the thermally excited photons. The optomechanical based quantum illumination system has wieldy been studied, and the results showed that operation at high temperature is so crucial to preserve the entanglem… ▽ More In this study, the main focus is laid on the design of the optoelectronic quantum illumination system to enhance the system performance, such as operation at high temperature and confinement of the thermally excited photons. The optomechanical based quantum illumination system has wieldy been studied, and the results showed that operation at high temperature is so crucial to preserve the entanglement between modes. The main problem is that the mechanical part has to operate with a low frequency with which a large number of thermally excited photons are generated and worsened the entanglement. To solve this problem, we focus on replacing the mechanical part with the optoelectronic components. In this system, the optical cavity is coupled to the microwave cavity through a Varactor diode excited by a photodetector. The photodetector is excited by the optical cavity modes and drives the current flow as a function of incident light drives the Varactor diode at which the voltage drop is a function of current generated by the photodetector. To engineer the system, the effect of some parameters is investigated. One of the critical parameters is the microwave cavity to the photodetector coupling factor. Our results indicate that this coupling factor induces a significant difference in the new design as compared to the optomechanical quantum illumination system. At some specific values of the coupling factor, the modes remained completely entangled up to 5.5 K and partially entangled around 50 K. △ Less

Submitted 21 July, 2020; originally announced July 2020.

MSC Class: 81V10; 81V80; 81S08; 81V10

Entanglement Sustainability in Quantum Radar

Authors: Ahmad Salmanogli, Dincer Gokcen, H. Selcuk Gecim

Abstract: Quantum radar is generally defined as a detection sensor that utilizes the microwave photons like a classical radar. At the same time, it employs quantum phenomena to improve detection, identification, and resolution capabilities. However, the entanglement is so fragile, unstable, and difficult to create and to preserve for a long time. Also, more importantly, the entangled states have a tendency… ▽ More Quantum radar is generally defined as a detection sensor that utilizes the microwave photons like a classical radar. At the same time, it employs quantum phenomena to improve detection, identification, and resolution capabilities. However, the entanglement is so fragile, unstable, and difficult to create and to preserve for a long time. Also, more importantly, the entangled states have a tendency to leak away as a result of noise. The points mentioned above enforces that the entangled states should be carefully studied at each step of the quantum radar detection processes as follows. Firstly, the creation of the entanglement between microwave and optical photons into the tripartite system is realized. Secondly, the entangled microwave photons are intensified. Thirdly, the intensified photons are propagated into the atmosphere (attenuation medium) and reflected from a target. Finally, the backscattered photons are intensified before the detection. At each step, the parameters related to the real mediums and target material can affect the entangled states to leak away easily. In this article, the entanglement behavior of a designed quantum radar is specifically investigated. In this study, the quantum electrodynamics theory is generally utilized to analyze the quantum radar system to define the parameters influencing the entanglement behavior. The tripartite system dynamics of equations of motions are derived using the quantum canonical conjugate method. The results of simulations indicate that the features of the tripartite system and the amplifier are designed in such a way to lead the detected photons to remain entangled with the optical modes. △ Less

Submitted 18 September, 2019; originally announced September 2019.

Quantum Sensor Duplicating the Robins Procedure

Authors: Ahmad Salmanogli

Abstract: In this article, we design a quantum device to duplicate the Robins procedure. The Robins use a unique method to determine the migratory direction. In the procedure utilized, the important issue is the effect of the geomagnetic field on the magnetic momentum of created radical pairs (triplet-singlet states) dancing with a special frequency. To duplicate the same operational procedure, the quantum… ▽ More In this article, we design a quantum device to duplicate the Robins procedure. The Robins use a unique method to determine the migratory direction. In the procedure utilized, the important issue is the effect of the geomagnetic field on the magnetic momentum of created radical pairs (triplet-singlet states) dancing with a special frequency. To duplicate the same operational procedure, the quantum sensor consisting of two coincident tripartite systems is designed. Each system is separately excited with the entangled photons (signal and idler) produced through nonlinearity. In a traditional tripartite system, the microwave cavity mode can be non-classically correlated with the optical cavity mode. In this study, however, there are two microwave cavities modes separately affected by the entangled photons, and these modes can be entangled. The entangled microwave photons play the same role that the triplet-singlet state of the electrons have in the Robins operating system. It is the key point that the quantum sensor is deigned to work with, in such a way that the entangled microwave photons can be strongly affected by the applied external magnetic field. In fact, it is the criterion employed by the quantum sensor to sense the magnetic field intensity and the direction. To analyze the system, the canonical conjugate method is introduced to determine the quantum sensor Hamiltonian, and then the dynamics equations of motions are analytically derived using Heisenberg-Langevin equations. △ Less

Submitted 10 July, 2019; v1 submitted 28 June, 2019; originally announced June 2019.

Comments: 15 pages, 7 figures

MSC Class: 81P40; 81V10; 70S05

Optical and Microcavity Modes Entanglement by means of Opto-Electronics System

Authors: Ahmad Salmanogli, Dincer Gokcen, H. Selcuk Gecim

Abstract: Entanglement between optical mode and microwave mode is a critical issue in illumination systems. Traditionally, optomechanical systems are applied to couple the optical mode to microcavity modes. However, due to some restrictions of this system such as sensitivity to the thermal noise at room temperature, a novel optoelectronic system is designed in this study to fix the recent system problems. U… ▽ More Entanglement between optical mode and microwave mode is a critical issue in illumination systems. Traditionally, optomechanical systems are applied to couple the optical mode to microcavity modes. However, due to some restrictions of this system such as sensitivity to the thermal noise at room temperature, a novel optoelectronic system is designed in this study to fix the recent system problems. Unlike recent optomechanical systems, the optical modes are directly coupled to the microwave cavity through the optoelectronic elements with no need mechanical system. The main objective of this work is to generate the entangled modes at room temperature. For this purpose, we theoretically analyze the dynamics of motion of the optoelectronic system with the Heisenberg-Langevin equations, from which one can calculate the coupling between optical and microcavity modes. The most important feature of this system is the coupling between optical mode and microwave cavity mode, which is done using a photodetector and a Varactor diode. Hence, by controlling the photodetector current (photocurrent), which is dependent on the optical cavity incidence wave and the Varactor diode biased, which is the function of the photocurrent, the coupling between the optical and microcavity mode is fully done. The modeling results show that the coupled modes are entangled at the room temperature with no need to any mechanical parts. △ Less

Submitted 18 May, 2018; originally announced May 2018.

Journal ref: Phys. Rev. Applied 11, 024075 (2019)

Optical and Microcavity Modes Entanglement by means of Developed Opto-Mechanical System

Authors: Ahmad Salmanogli, H. Selçuk Geçim

Abstract: To improve the performance of the traditional tripartite opto-mechanical system, we design a developed opto-mechanical tripartite system in which all subsystems such as an optical cavity, microresonator, and microcavity modes are coupled directly to each other. This system is analyzed quantum mechanically, and its dynamics of motion is studied by the Heisenberg-Langevin equations. Notably, the ori… ▽ More To improve the performance of the traditional tripartite opto-mechanical system, we design a developed opto-mechanical tripartite system in which all subsystems such as an optical cavity, microresonator, and microcavity modes are coupled directly to each other. This system is analyzed quantum mechanically, and its dynamics of motion is studied by the Heisenberg-Langevin equations. Notably, the originality of this work contributes to embedding the spherical capacitor in the optical cavity where the plasmon-plasmon interaction between capacitor plates manipulates the internal electric field. Therefore, using plasmon-plasmon interaction inside the spherical capacitor, which leads to nonlinearity, causes the contributed polarization function of the plasmonic property. Actually, this plasmonic property manages the spherical capacitance. Although the spherical capacitor is fundamentally dependent on the plasmonic properties caused by the capacitor gap, the spherical capacitor for a design is required to be parallel to the microwave capacitor. The system developed in the present work proved that the stability of the entanglement between optical cavity and microcavity modes toward the temperature changing is dramatically increased; which is the original goal of this study. It is worth mentioning that the environment noise severely restricted the traditional tripartite system operated with a wide bandwidth, hence the present design can efficiently fix this issue. △ Less

Submitted 30 April, 2018; originally announced April 2018.

Raman Modes Non-classicality through Entangled Photons Coupling to Plasmonic Modes

Authors: Ahmad Salmanogli

Abstract: In this article, non-classical properties of Raman modes are investigated. The original goal, actually, is to identify how and by which method we can induce non-classicality in Raman modes. We introduce a plasmonic system in which Raman dye molecules are buried between two shells of the plasmonic materials similar to onion-like core/shell nanoparticle. This system is excited by the entangled photo… ▽ More In this article, non-classical properties of Raman modes are investigated. The original goal, actually, is to identify how and by which method we can induce non-classicality in Raman modes. We introduce a plasmonic system in which Raman dye molecules are buried between two shells of the plasmonic materials similar to onion-like core/shell nanoparticle. This system is excited by the entangled photons, followed by analyzing its dynamics of motion using the Heisenberg-Langevin equations by which the time evolution of the signal-idler mode and Raman modes are derived. Interestingly, the entangled photons are coupled to the plasmonic modes which are used to improve the non-classicality. It is shown that the exciting system with the entangled photons lead to inducing the non-classicality in Raman modes and entanglement between them. This behavior is attributed to the non-classicality of input modes that is coupled to the Raman modes considering the correlation between the incident wave frequency and Raman modes frequency. Notably, these quantum properties are dramatically affected by the environment temperature and Raman molecules location around the plasmonic nanoparticles. Modelling results demonstrate that a temperature increase has a drastic effect on system dynamics. Moreover, it is found that the entanglement between modes in system surely is affected by the coupling between the incident modes and plasmonic modes generated by the core/shell nanoparticles. Finally, as an important result, it is revealed that the Raman modes such as stoke and anti-stoke modes show a revival behavior, which is a quantum phenomenon. △ Less

Submitted 13 March, 2018; originally announced March 2018.