-
Effects of Li Do** on Superconducting Properties of Citrate Gel Prepared Y1-xLixBa2Cu3O7-d Compound
Authors:
Mahshid Amiri Moghadam,
Hassan Gashmard,
Seyed Sajjad Hosseini,
Hamideh Shakeripour,
Hadi Salamati
Abstract:
The Y1-xLixBa2Cu3O7-d polycrystalline bulk superconductors doped with Li substituting at the Y site at different concentrations (x = 0, 0.01, 0.02, 0.1) were prepared using the citrate-gel method to study the effects of do** on the superconducting temperature and critical current density. The question was whether Li addition characterized by a high Debye frequency would have any positive effects…
▽ More
The Y1-xLixBa2Cu3O7-d polycrystalline bulk superconductors doped with Li substituting at the Y site at different concentrations (x = 0, 0.01, 0.02, 0.1) were prepared using the citrate-gel method to study the effects of do** on the superconducting temperature and critical current density. The question was whether Li addition characterized by a high Debye frequency would have any positive effects on Tc. The optimum citrate-gel and heat treatment conditions were identified as those yielding samples with a maximum grain size on the order of 50 micro.m (up to the optimum Li-do** level, x=0.01). Li substitution at the Y site was verified by structural, electrical, and magnetic measurements of the produced samples, whereas X-ray diffraction (XRD) analysis revealed the formation of a pure phase with no visible impurity phases. Moreover, AC magnetic susceptibility measurements showed no increase in the superconducting transition temperature Tc, consistent with the predicted results obtained by machine learning method, although it was theoretically expected to increase owing to the high Debye frequency of Li. This observation is consistent with magnetic coupling models for pairing mechanism in cuprates. Finally, because of the optimum conditions of the preparation procedure, nearly identical values of the critical current density (Jc) were recorded for samples with different Li do** levels (up to the optimum Li do** level). It was found that improved compound preparation conditions would have a critical and extensive effect on Jc enhancement, with nearly no Tc suppression.
△ Less
Submitted 7 January, 2024;
originally announced January 2024.
-
Investigation of structural, electrical and electrochemical properties of La0.6Sr0.4Fe0.8Mn0.2O3-δ as an intermediate temperature solid oxide fuel cell cathode
Authors:
F. Yadollahi Farsani,
M. Jafari,
E. Shahsavari,
H. Salamati
Abstract:
La0.6Sr0.4Fe0.8Mn0.2O3 (LSFM) compound is synthesized by Sol-gel method and evaluated as a cathode material for the intermediate temperature solid oxide fuel cell (IT-SOFC). X-ray diffraction (XRD) indicates that the LSFM has a Rhombohedral structure with R-3c space group symmetry. The XRD patterns reveal very small amount of impurity phase in the LSFM and Y2O3-Stabilized ZrO2 (YSZ) mixture powder…
▽ More
La0.6Sr0.4Fe0.8Mn0.2O3 (LSFM) compound is synthesized by Sol-gel method and evaluated as a cathode material for the intermediate temperature solid oxide fuel cell (IT-SOFC). X-ray diffraction (XRD) indicates that the LSFM has a Rhombohedral structure with R-3c space group symmetry. The XRD patterns reveal very small amount of impurity phase in the LSFM and Y2O3-Stabilized ZrO2 (YSZ) mixture powders sintered at 600, 700 and 800 C for a week. The maximum electrical conductivity of LSFM is about 35.35 S.cm-1 at 783 C in the air. The oxygen chemical diffusion coefficients, DChem, are increased from 1.39*10-6 up to 7.66*10-6 .cm2. Besides, the oxygen surface exchange coefficients, kChem, are obtained to lie between 2.9*10-3 and 8.7*10-3 cm.s-1 in a temperature range of 600-800 C. The area-specific resistances (ASRs) of the LSFM symmetrical cell are 7.53, 1.53, 1.13, 0.46 and 0.31 .cm2 at 600, 650, 700, 750 and 800 C respectively, and related activation energy, Ea, is about 1.23 eV.
△ Less
Submitted 19 October, 2019;
originally announced October 2019.
-
Fabrication of condense and thin YSZ electrolyte layer using novel thermal-assisted slurry spin coating method for IT-SOFC
Authors:
E. Shahsavari,
M. Jafari,
F. Yadollahi,
N. Ekraminezhad,
M. Ranjbar,
H. Salamati
Abstract:
A simple spin coating approach is introduced to fabricate Yttria-Stabilized Zirconia (YSZ) electrolyte layer on NiO-YSZ anode substrate for solid oxide fuel cell applications. Heating the substrate during the slurry spin coating process enhances the affected area through the layer and leads to optimize the compacting amount of coated electrolyte particles before sintering procedure. On top of this…
▽ More
A simple spin coating approach is introduced to fabricate Yttria-Stabilized Zirconia (YSZ) electrolyte layer on NiO-YSZ anode substrate for solid oxide fuel cell applications. Heating the substrate during the slurry spin coating process enhances the affected area through the layer and leads to optimize the compacting amount of coated electrolyte particles before sintering procedure. On top of this bilayer substrate, LCFN is deposited as an intermediate temperature solid oxide fuel cell cathode, in order to have suitable output performances at intermediate temperature ranges. Applying humidified hydrogen as fuel and ambient air as the oxidant, cell performance characterizations exhibit higher power outputs for prepared sample. Electrochemical Impedance Spectroscopy measurements on single cells also demonstrate that both interfacial and Ohmic resistances are reduced. These results along with Scanning Electron Microscope micrographs reveal that the density of the YSZ layer which is coated by the suggested approach is better than the usual slurry spin coating method.
△ Less
Submitted 3 May, 2021; v1 submitted 11 October, 2019;
originally announced October 2019.
-
Influence of Al-do** on the structural, magnetic, and electrical properties of La$_{1-x}$Ba$_x$Mn$_{1-x}$Al$_x$O$_3$ ($0\leq x \leq 0.25$) manganites
Authors:
J. Ardashti Saleh,
I. Abdolhosseini Sarsari,
P. Kameli,
H. Salamati
Abstract:
We have studied the effect of Al do** on the structural, magnetic and electrical properties of La$_{1-x}$Ba$_x$Mn$_{1-x}$Al$_x$O$_3$ ($0\leq x \leq 0.25$) manganite, annealed in two 750$^oC$ and 1350$^oC$ temperatures. The XRD analysis shows that the structures in all samples have single phase rhombohedral structure with R$\bar{3}$c space group. The unit cell volume almost decrease with increasi…
▽ More
We have studied the effect of Al do** on the structural, magnetic and electrical properties of La$_{1-x}$Ba$_x$Mn$_{1-x}$Al$_x$O$_3$ ($0\leq x \leq 0.25$) manganite, annealed in two 750$^oC$ and 1350$^oC$ temperatures. The XRD analysis shows that the structures in all samples have single phase rhombohedral structure with R$\bar{3}$c space group. The unit cell volume almost decrease with increasing the Al do** in all samples. The grain growth with increasing annealing temperature and Al do** also have been studied. We observed that, T$_c$ temperature decreases when the Al ion substitute in Mn ion site. The magnetic study of the samples via magnetic susceptibility results in Griffiths and spin-glass phase for samples doped with aluminium. Along the resistivity measurement results, the $T_{MIT}$ (metal-insulator) transition temperatures decrease and the system become an insulator. The insulator-metal transition occurs for L0 sample in near 165K, while this transition is weak for H0 sample due to oxygen non-stoichiometry.Using three models viz. 1. Adiabatic small polaron ho**, 2.Variable range hop**, and 3. Percolation model, the resistance have been studied.
△ Less
Submitted 23 July, 2016;
originally announced July 2016.
-
Comment on Dynamics distortions and polaronic effects in the paramagnetic state of La$_{0.8}$Ba$_{0.2}$Mn$_{1-x}$Al$_x$O$_3$
Authors:
J. Ardashti Saleh,
I. Abdolhosseini Sarsari,
P. Kameli,
H. Salamati
Abstract:
Recently, the authors of ref.[1], reported dynamics distortion and polaronic effects in the paramagnetic state of $La_{0.8}Ba_{0.2}Mn_{1-x}Al_xO_3$ manganites. In this comment we want to complete the phase diagram(Fig3[1]) and point out of occurring spin-glass state in this manganite which is not intended for x=0.15 do**.
Recently, the authors of ref.[1], reported dynamics distortion and polaronic effects in the paramagnetic state of $La_{0.8}Ba_{0.2}Mn_{1-x}Al_xO_3$ manganites. In this comment we want to complete the phase diagram(Fig3[1]) and point out of occurring spin-glass state in this manganite which is not intended for x=0.15 do**.
△ Less
Submitted 10 December, 2015; v1 submitted 5 December, 2015;
originally announced December 2015.
-
Effect of Ag do** on structural, optical, and photocatalytic properties of ZnO nanoparticles
Authors:
S. M. Hosseini,
I. Abdolhosseini Sarsari,
P. Kameli,
H. Salamati
Abstract:
Silver-doped ZnO nanoparticles were successfully fabricated at $400\,^{\circ}\mathrm{C}$ via a simple and rapid method based on short time solid state milling and calcination of precursor powders. The effect of Ag dilute do** on the structural, optical, and photocatalytic properties of ZnO nanoparticles was investigated by X-ray diffraction (XRD), UV-vis spectrophotometer and photoluminescence (…
▽ More
Silver-doped ZnO nanoparticles were successfully fabricated at $400\,^{\circ}\mathrm{C}$ via a simple and rapid method based on short time solid state milling and calcination of precursor powders. The effect of Ag dilute do** on the structural, optical, and photocatalytic properties of ZnO nanoparticles was investigated by X-ray diffraction (XRD), UV-vis spectrophotometer and photoluminescence (PL) spectroscopy.~X-ray analysis revealed that Ag doped ZnO solidified in hexagonal wurtzite structure.~ The intensity of deep level emission was reduced with increasing silver do** in PL measurement.~The X-ray photoelectron spectroscopy (XPS) measurement predicted that Ag was mainly in the metallic state and ZnO was in the wurtzite structure.~ This metallic state accompanied by unique zinc oxide properties decolorized the methyl violet, efficiently.~ The first-principles calculation represented Ag deep level in ZnO with an n-type behavior, while in ZnO structure with grain boundary p-type nature via shallow states is dominant same as powder samples as studied in this present work. It was suggested that these Ag-doped ZnO nanoparticles may have good applications in optoelectronics, spintronics and wastewater treatment.
△ Less
Submitted 3 August, 2015;
originally announced August 2015.
-
Real-time measurement of laser induced photoconductivity in sol-gel derived Al doped ZnO thin films
Authors:
F. Eskandari,
M. Ranjbar,
P. Kameli,
H. Salamati
Abstract:
In this paper Al doped ZnO (AZO) thin films with 0, 3, 6 and 12 at. % Al concentration were prepared by sol-gel method on glass substrates. The deposited films were annealed at different temperatures of 300, 350, 400, 450 and 500 °C for 1 h in air. X-ray diffraction (XRD) showed wurtzite crystalline structure for the films annealed above 400 °C. The films were subsequently irradiated by beams of e…
▽ More
In this paper Al doped ZnO (AZO) thin films with 0, 3, 6 and 12 at. % Al concentration were prepared by sol-gel method on glass substrates. The deposited films were annealed at different temperatures of 300, 350, 400, 450 and 500 °C for 1 h in air. X-ray diffraction (XRD) showed wurtzite crystalline structure for the films annealed above 400 °C. The films were subsequently irradiated by beams of excimer (KrF, λ=248 nm) laser. The evolution of crystal structure, surface morphology and optical properties were studied using XRD, filed emission scanning electron microscope (FE-SEM) and UV-Vis spectrophotometer, respectively. Real-time measurement of electrical conductivity during laser irradiation showed a transient or persistent photoconductivity effect. The effect of laser energy on this photoconductivity was also investigated. Based on the observed photoluminescence (PL) and X-ray photoelectron spectroscopy (XPS), the observed photoconductivity effect was described.
△ Less
Submitted 28 December, 2014;
originally announced December 2014.
-
Electronic structure of Co doped ZnO from the \textit{GW} perspective
Authors:
I. Abdolhosseini Sarsari,
C. D. Pemmaraju,
H. Salamati,
S. Sanvito
Abstract:
In transition metal doped ZnO, the energy position of dopant 3$d$ states relative to host conduction and valence bands is crucial in determining the possibilty of long range ferromagnetism. Density functional theory based estimates of the energy position of Co-3$d$ states in Co doped ZnO differ substantially depending upon the choice of exchange-correlation functional. In this work we investigate…
▽ More
In transition metal doped ZnO, the energy position of dopant 3$d$ states relative to host conduction and valence bands is crucial in determining the possibilty of long range ferromagnetism. Density functional theory based estimates of the energy position of Co-3$d$ states in Co doped ZnO differ substantially depending upon the choice of exchange-correlation functional. In this work we investigate many-body $GW$ corrections on top of DFT$+U$ and hybrid-DFT groundstates to provide a theoretical benchmark for the quasiparticle energies in wurtzite ZnO:Co. Both single shot $G_0W_0$ as well as partially self-consistent $GW_0$ wherein the wavefunctions are held fixed at the DFT level but the eigenvalues in G are iterated, are considered. The predicted energy position of the minority spin Co-$t_2$ states is 3.0-3.6 eV above the ZnO conduction band minimum which is closer to hybrid-DFT based estimates.
△ Less
Submitted 25 May, 2013;
originally announced May 2013.
-
First-principles study of structural, electronic and thermodynamic properties of (ZnO)$_n$(n=2-16) clusters
Authors:
I. Abdolhosseini Sarsari,
S. Javad Hashemifar,
Hadi Salamati,
Hadi Akbarzadeh
Abstract:
The structural, electronic, and vibrational thermodynamic properties of the (ZnO)$_n$ (n=2-16) clusters are studied using density functional - full potential computations. The results show, small clusters up to $n=9$ stabilize in the 2D ring shape geometries while the larger clusters prefer the 3D cage like structures. The ring to cage structural cross over in ZnO clusters is studied by investigat…
▽ More
The structural, electronic, and vibrational thermodynamic properties of the (ZnO)$_n$ (n=2-16) clusters are studied using density functional - full potential computations. The results show, small clusters up to $n=9$ stabilize in the 2D ring shape geometries while the larger clusters prefer the 3D cage like structures. The ring to cage structural cross over in ZnO clusters is studied by investigating the behavior of the Zn-O-Zn bond angle, the Zn-O bond strength, and the number of bonds in the systems. It is argued that 12 is the lowest magic number of ZnO clusters at ground state, while finite temperature vibrational excitations enhance the relative stability of the (ZnO)$_9$ cluster and make it a magic system at temperatures above about 170 K. The obtained electronic structure of ZnO clusters before and after applying the many-body GW corrections evidence a size induced red shift originated from the ring to cage structural cross over in these systems. The behavior of the extremal points of electron density of the clusters along with the extrapolated cluster binding energies at very large sizes may be evidences for existence of a metastable structure for large ZnO nanostructures, different with the bulk ZnO structure.
△ Less
Submitted 19 April, 2012;
originally announced April 2012.
-
Evolution of microstructural and mechanical properties of nanocrystalline Co2FeAl Heusler alloy prepared by mechanical alloying
Authors:
M. Hakimi,
P. Kameli,
H. Salamati,
Y. Mazaheri
Abstract:
Mechanical alloying (MA) has been used to fabricate the Co2FeAl Heusler alloy with a nanocrystalline structure. The formation mechanism of the alloy has been investigated. Rietveld analysis showed that all samples that were milled for more than 15 hours had an L21 structure with a space group of Fm3m. The crystallite size and internal strain of the samples were calculated using the Williamson-Hall…
▽ More
Mechanical alloying (MA) has been used to fabricate the Co2FeAl Heusler alloy with a nanocrystalline structure. The formation mechanism of the alloy has been investigated. Rietveld analysis showed that all samples that were milled for more than 15 hours had an L21 structure with a space group of Fm3m. The crystallite size and internal strain of the samples were calculated using the Williamson-Hall equation. With mechanical alloying of up to 20 hours the crystallite size of Co2FeAl increased, after which the crystallite size started to decrease. In contrast, internal strain first decreased during the process and then increased with the increase of milling time. The powder obtained after 20 hours of MA was split into three parts and separately annealed at 300, 500 and 700 oC for 5 hours. A considerable increase was observed in the hardness value of powder particles with the increase of annealing temperature up to 500 oC. However, the hardness value of the sample annealed at 700 oC decreased. It seems that this feature is related to parameters such as increase of crystallite size, enhancement of lattice ordering, change in density of defects and impurities and nonstoichiometric effects.
△ Less
Submitted 8 February, 2012;
originally announced February 2012.
-
Specific heat and magnetocaloric effect in Pr1-xAgxMnO3 manganites
Authors:
A. G. Gamzatov,
A. M. Aliev,
A. B. Batdalov,
H. Ahmadvand,
H. Salamati,
P. Kameli
Abstract:
The magnetocaloric effect in alternating magnetic fields has been investigated in Pr1-xAgxMnO3 manganites with x=0.05-0.25. The stepwise reversal of the sign of the magnetocaloric effect has been revealed in a weakly doped sample (x=0.05) at low temperatures (~80 K). This reversal is attributed to the coexistence of the ferromagnetic and canted antiferromagnetic phases with different critical temp…
▽ More
The magnetocaloric effect in alternating magnetic fields has been investigated in Pr1-xAgxMnO3 manganites with x=0.05-0.25. The stepwise reversal of the sign of the magnetocaloric effect has been revealed in a weakly doped sample (x=0.05) at low temperatures (~80 K). This reversal is attributed to the coexistence of the ferromagnetic and canted antiferromagnetic phases with different critical temperatures.
△ Less
Submitted 19 October, 2010;
originally announced October 2010.
-
The effect of grain boundaries on the domain wall dynamics in Pr$_{1-x}$Ag$_x$MnO$_3$ manganites
Authors:
Hossein Ahmadvand,
Hadi Salamati,
Parviz Kameli
Abstract:
We performed detailed ac susceptibility measurements on Pr$_{1-x}$Ag$_x$MnO$_3$ ($x$=0.15, 0.20) manganites and observed unusual and interesting features, which are associated with the domain walls and the effects of grain-boundaries on their movements. It is shown that the ac field, frequency, temperature, thermal cycling and grain coupling significantly influence the real and especially imaginar…
▽ More
We performed detailed ac susceptibility measurements on Pr$_{1-x}$Ag$_x$MnO$_3$ ($x$=0.15, 0.20) manganites and observed unusual and interesting features, which are associated with the domain walls and the effects of grain-boundaries on their movements. It is shown that the ac field, frequency, temperature, thermal cycling and grain coupling significantly influence the real and especially imaginary parts of the ac susceptibility. We argue that the cooperative depinning of the domain walls from the grain-boundaries accompanying with a large distance movements of the walls leads to the appearance of an anomaly at low temperatures. The anomaly is observed above a threshold ac field and depends on the intergrain coupling. The results show that in the powdered form of bulk samples, the anomaly disappears and the ac field dependence of the $χ'$ and $χ"$ suppresses. Below the anomaly temperature, significant and unusual thermal hysteresis occurs in the real and especially imaginary parts of the ac susceptibility. Thermal hysteresis depends on the thermal cycling and indicates thermally irreversible wall pinning and depinning. The susceptibility is practically frequency-independent in the temperature range of thermal hysteresis i.e. below the anomaly. The frequency dependence of ac susceptibility between the anomaly temperature and the transition temperature is discussed by considering the temperature dependence of the relaxation process of the domain walls.
△ Less
Submitted 19 April, 2010;
originally announced April 2010.
-
Particle size effect on magnetic properties of interacting La0.67Sr0.33MnO3 nanoparticles
Authors:
Ali Rostamnejadi,
Hadi salamati,
Parviz Kameli
Abstract:
Magnetic nanoparticles of La0.67Sr0.33MnO3 (LSMO) manganite with mean particle sizes of 13, 16, 18 and 21 nm were prepared by the sol-gel method. The crystal structure and mean particle size of the synthesized powders were estimated by X-ray diffraction (XRD) analysis using rietveld refinement and transmission electron microscopy (TEM). Fourier transform infrared (FTIR) transmission spectroscopy…
▽ More
Magnetic nanoparticles of La0.67Sr0.33MnO3 (LSMO) manganite with mean particle sizes of 13, 16, 18 and 21 nm were prepared by the sol-gel method. The crystal structure and mean particle size of the synthesized powders were estimated by X-ray diffraction (XRD) analysis using rietveld refinement and transmission electron microscopy (TEM). Fourier transform infrared (FTIR) transmission spectroscopy revealed that stretching and bending modes are influenced by calcinations temperature. Dc magnetization versus magnetic field of the samples was carried out at room temperature. Magnetic dynamics of the samples was studied by the measurement of ac magnetic susceptibility versus temperature at different frequencies and ac magnetic fields. A frequency-dependent peak was observed in ac magnetic susceptibility versus temperature which is well described by Vogel-Fulcher and critical slowing down laws, and empirical and parameters. By fitting the experimental data with Vogel-Fulcher and critical slowing down laws, the relaxation time, characteristic temperature, magnetic anisotropy energy, effective magnetic anisotropy constant and critical exponent zv have been estimated. The obtained values of c1, c2, T0 and t0 from the Vogel-Fulcher law support of the presence of strong interaction between magnetic nanoparticles. The values of zv and t0 obtained from critical slowing down fit suggest the presence of superspin glass behavior in LSMO nanoparticles of different sizes.
△ Less
Submitted 16 July, 2009;
originally announced July 2009.
-
Investigation of the role of Ag in Pr$_{1-x}$Ag$_x$MnO$_3$ manganites
Authors:
Hossein Ahmadvand,
Hadi Salamati,
Parviz Kameli
Abstract:
X-Ray diffraction, ac susceptibility and electrical resistivity measurements were performed in order to investigate the effect of Ag substitution for Pr in the polycrystalline Pr$_{1-x}$Ag$_x$MnO$_3$ (0.0$\leq$x$\leq$0.25) manganites. The XRD results show that the samples crystallize in the O'-orthorhombic structure with a cooperative Jahn-Teller deformation. We give evidence that the Ag$^{+}$ i…
▽ More
X-Ray diffraction, ac susceptibility and electrical resistivity measurements were performed in order to investigate the effect of Ag substitution for Pr in the polycrystalline Pr$_{1-x}$Ag$_x$MnO$_3$ (0.0$\leq$x$\leq$0.25) manganites. The XRD results show that the samples crystallize in the O'-orthorhombic structure with a cooperative Jahn-Teller deformation. We give evidence that the Ag$^{+}$ is not substituted at the Pr$^{3+}$ site in the PrMnO$_{3}$ structure. The increase of $T_{C}$ up to 130 K is suggested to be due to further oxidation of manganite grains by the oxygen released from the metallic silver at high temperatures. No metal-insulator transition was observed in the samples.
△ Less
Submitted 27 August, 2009; v1 submitted 7 June, 2009;
originally announced June 2009.
-
AC susceptibility of YBa2Cu3O7-d superconducting thin film in a perpendicular field
Authors:
H. Salamati,
P. Kameli
Abstract:
The temperature dependence of ac susceptibility of YBCO thin film was measured as a function of frequency and ac field amplitude in a field perpendicular to the film plane. We show that all measured ac susceptibility curves can be caled into a single curve using the peak temperature (Tp) of its imaginary part as the scaling parameter. The frequency effect on ac susceptibility was also measured.…
▽ More
The temperature dependence of ac susceptibility of YBCO thin film was measured as a function of frequency and ac field amplitude in a field perpendicular to the film plane. We show that all measured ac susceptibility curves can be caled into a single curve using the peak temperature (Tp) of its imaginary part as the scaling parameter. The frequency effect on ac susceptibility was also measured. As the frequency increases,(Tp)shifts to higher temperature.This effect can be interpreted in terms of flux creep. The temperature T,and field,Hac, dependence of the activation energy obtained from the Arrhenius plot for the frequency(f)and(Tp),can be described as U(Hac,T)=Uo(1-T/Tc)Hac^(-0.18).
△ Less
Submitted 30 November, 2002;
originally announced December 2002.
-
Effect of deoxygenation on the weak link behavior of YBCO superconductors
Authors:
H. Salamati,
P. Kameli
Abstract:
A systematic study of the weak- link behavior for YBa2Cu3O7-d polycrystalline samples has been done using the electrical resistivity and AC susceptibility techniques.The experiments were performed with two samples of similar grain, a sample of well-coupled grains, and a deoxygenated sample in such a way that the oxygen mostly come from the intergrain region. Analysis of the temperature dependenc…
▽ More
A systematic study of the weak- link behavior for YBa2Cu3O7-d polycrystalline samples has been done using the electrical resistivity and AC susceptibility techniques.The experiments were performed with two samples of similar grain, a sample of well-coupled grains, and a deoxygenated sample in such a way that the oxygen mostly come from the intergrain region. Analysis of the temperature dependence of the AC susceptibility near the transition temperature (Tc) has been done employing Bean critical state model. The observed variation of intergranular critical current densities(Jc)with temperature indicates that the weak links are changed from superconductor- normal metal-superconductor(SNS) for well-coupled sample to superconductor-insulator- normal metal-superconductor(SINS) type of junctions for the deoxygenated sample.These results are interpreted in terms of oxygen depletion from grain boundaries, which in turn decreases the intergranular Josephson coupling energy with a consequent decrease ofpinning of the intergranular vortices.
△ Less
Submitted 27 November, 2002;
originally announced November 2002.
