-
Inorganic/inorganic composites through emulsion templating
Authors:
Tianhui Jiang,
Shitong Zhou,
Yinglun Hong,
Erik Poloni,
Eduardo Saiz,
Florian Bouville
Abstract:
Inorganic/inorganic composites are found in multiple applications crucial for the energy transition, from nuclear reactor to energy storage devices. Their microstructures dictate a number of properties, such as mass transport or fracture resistance. There has been a multitude of process developed to control the microstructure of inorganic/inorganic composites, from powder mixing and the use of sho…
▽ More
Inorganic/inorganic composites are found in multiple applications crucial for the energy transition, from nuclear reactor to energy storage devices. Their microstructures dictate a number of properties, such as mass transport or fracture resistance. There has been a multitude of process developed to control the microstructure of inorganic/inorganic composites, from powder mixing and the use of short or long fibre, to tape casting for laminates up to recently 3D printing. Here, we combined emulsions and slip casting into a simpler, broadly available, inexpensive processing platform that allow for in situ control of a composite's microstructure that also enables complex sha**. Emulsions are used to form droplets of controllable size of one inorganic phase into another, while slip casting enable 3D sha** of the final part. Our study shows that slip casting emulsions trigger a two-steps solvent removal that opens the possibility for conformal coating of porosity. By making magnetically responsive droplets, we form inorganic fibre inside an inorganic matrix during slip casting, demonstrating a simple fabrication for long-fibre reinforced composites. We exemplify the potential of this processing platform by making strong and lightweight alumina scaffolds reinforced by a confirmed zirconia coating and alumina with metallic iron fibres that displays work of fracture an order of magnitude higher than alumina.
△ Less
Submitted 24 January, 2024;
originally announced January 2024.
-
A community-based transcriptomics classification and nomenclature of neocortical cell types
Authors:
Rafael Yuste,
Michael Hawrylycz,
Nadia Aalling,
Detlev Arendt,
Ruben Armananzas,
Giorgio Ascoli,
Concha Bielza,
Vahid Bokharaie,
Tobias Bergmann,
Irina Bystron,
Marco Capogna,
Yoonjeung Chang,
Ann Clemens,
Christiaan de Kock,
Javier DeFelipe,
Sandra Dos Santos,
Keagan Dunville,
Dirk Feldmeyer,
Richard Fiath,
Gordon Fishell,
Angelica Foggetti,
Xuefan Gao,
Parviz Ghaderi,
Onur Gunturkun,
Vanessa Jane Hall
, et al. (46 additional authors not shown)
Abstract:
To understand the function of cortical circuits it is necessary to classify their underlying cellular diversity. Traditional attempts based on comparing anatomical or physiological features of neurons and glia, while productive, have not resulted in a unified taxonomy of neural cell types. The recent development of single-cell transcriptomics has enabled, for the first time, systematic high-throug…
▽ More
To understand the function of cortical circuits it is necessary to classify their underlying cellular diversity. Traditional attempts based on comparing anatomical or physiological features of neurons and glia, while productive, have not resulted in a unified taxonomy of neural cell types. The recent development of single-cell transcriptomics has enabled, for the first time, systematic high-throughput profiling of large numbers of cortical cells and the generation of datasets that hold the promise of being complete, accurate and permanent. Statistical analyses of these data have revealed the existence of clear clusters, many of which correspond to cell types defined by traditional criteria, and which are conserved across cortical areas and species. To capitalize on these innovations and advance the field, we, the Copenhagen Convention Group, propose the community adopts a transcriptome-based taxonomy of the cell types in the adult mammalian neocortex. This core classification should be ontological, hierarchical and use a standardized nomenclature. It should be configured to flexibly incorporate new data from multiple approaches, developmental stages and a growing number of species, enabling improvement and revision of the classification. This community-based strategy could serve as a common foundation for future detailed analysis and reverse engineering of cortical circuits and serve as an example for cell type classification in other parts of the nervous system and other organs.
△ Less
Submitted 6 September, 2019;
originally announced September 2019.
-
Fabrication and in vitro characterization of three-dimensional organic/inorganic scaffolds by robocasting
Authors:
Julie Russias,
Eduardo Saiz,
Sylvain Deville,
Karol Gryn,
G. Liu,
Ravi K. Nalla,
Antoni P. Tomsia
Abstract:
A key issue for the fabrication of scaffolds for tissue engineering is the development of processing techniques flexible enough to produce materials with a wide spectrum of solubility (bioresorption rates) and mechanical properties matching those of calcified tissues. These techniques must also have the capability of generating adequate porosity to further serve as a framework for cell penetration…
▽ More
A key issue for the fabrication of scaffolds for tissue engineering is the development of processing techniques flexible enough to produce materials with a wide spectrum of solubility (bioresorption rates) and mechanical properties matching those of calcified tissues. These techniques must also have the capability of generating adequate porosity to further serve as a framework for cell penetration, new bone formation, and subsequent remodeling. In this study, we show how hybrid organic/inorganic scaffolds with controlled microstructures can be built using robotic assisted deposition at room temperature. Polylactide or polycaprolactone scaffolds with pore sizes ranging between 200-500 μm and hydroxyapatite contents up to 70 wt % were fabricated. Compressive tests revealed an anisotropic behavior of the scaffolds, strongly dependent on their chemical composition. The inclusion of an inorganic component increased their stiffness but they were not brittle and could be easily machined even for ceramic contents up to 70 wt%. The mechanical properties of hybrid scaffolds did not degrade significantly after 20 days in simulated body fluid. However, the stiffness of pure polylactide scaffolds increased drastically due to polymer densification. Scaffolds containing bioactive glasses were also printed. After 20 days in simulated body fluid they developed an apatite layer on their surface.
△ Less
Submitted 28 March, 2018;
originally announced April 2018.
-
Artificial Bone and Teeth through Controlled Ice Growth in Colloidal Suspensions
Authors:
Antoni P. Tomsia,
Eduardo Saiz,
Sylvain Deville
Abstract:
The formation of regular patterns is a common feature of many solidification processes involving cast materials. We describe here how regular patterns can be obtained in porous alumina and hydroxyapatite (HAP) by controlling the freezing of ceramic slurries followed by subsequent ice sublimation and sintering, leading to multilayered porous ceramic structures with homogeneous and well-defined arch…
▽ More
The formation of regular patterns is a common feature of many solidification processes involving cast materials. We describe here how regular patterns can be obtained in porous alumina and hydroxyapatite (HAP) by controlling the freezing of ceramic slurries followed by subsequent ice sublimation and sintering, leading to multilayered porous ceramic structures with homogeneous and well-defined architecture. These porous materials can be infiltrated with a second phase of choice to yield biomimetic nacre-like composites with improved mechanical properties, which could be used for artificial bone and teeth applications. Proper control of the solidification patterns provides powerful means of control over the final functional properties. We discuss the relationships between the experimental results, ice growth fundamentals, the physics of ice and the interaction between inert particles and the solidification front during directional freezing.
△ Less
Submitted 30 March, 2018;
originally announced April 2018.
-
Ice-templated porous alumina structures
Authors:
Sylvain Deville,
Eduardo Saiz,
Antoni P. Tomsia
Abstract:
The formation of regular patterns is a common feature of many solidification processes involving cast materials. We describe here how regular patterns can be obtained in porous alumina by controlling the freezing of ceramic slurries followed by subsequent ice sublimation and sintering, leading to multilayered porous alumina structures with homogeneous and well-defined architecture. We discuss the…
▽ More
The formation of regular patterns is a common feature of many solidification processes involving cast materials. We describe here how regular patterns can be obtained in porous alumina by controlling the freezing of ceramic slurries followed by subsequent ice sublimation and sintering, leading to multilayered porous alumina structures with homogeneous and well-defined architecture. We discuss the relationships between the experimental results, the physics of ice and the interaction between inert particles and the solidification front during directional freezing. The anisotropic interface kinetics of ice leads to numerous specific morphologies features in the structure. The structures obtained here could have numerous applications including ceramic filters, biomaterials, and could be the basis for dense multilayered composites after infiltration with a selected second phase.
△ Less
Submitted 12 October, 2017;
originally announced October 2017.
-
Freeze casting of hydroxyapatite scaffolds for bone tissue engineering
Authors:
Sylvain Deville,
Eduardo Saiz,
Antoni Tomsia
Abstract:
Although extensive efforts have been put into the development of porous scaffolds for bone regeneration, with encouraging results, all porous materials have a common limitation: the inherent lack of strength associated with porosity. Hence, the development of porous hydroxyapatite scaffolds has been hindered to non-load bearing applications. We report here how freeze-casting can be applied to synt…
▽ More
Although extensive efforts have been put into the development of porous scaffolds for bone regeneration, with encouraging results, all porous materials have a common limitation: the inherent lack of strength associated with porosity. Hence, the development of porous hydroxyapatite scaffolds has been hindered to non-load bearing applications. We report here how freeze-casting can be applied to synthesize porous hydroxyapatite scaffolds exhibiting unusually high compressive strength, e.g. up to 145 MPa for 47% porosity and 65 MPa for 56% porosity. The materials are characterized by well-defined pore connectivity along with directional and completely open porosity. Various parameters affecting the porosity and compressive strength have been investigated, including initial slurry concentration, freezing rate, and sintering conditions. The implications and potential application as bone substitute are discussed. These results might open the way for hydroxyapatite-based materials designed for load-bearing applications. The biological response of these materials is yet to be tested.
△ Less
Submitted 12 October, 2017;
originally announced October 2017.
-
Freezing as a path to build complex composites
Authors:
Sylvain Deville,
Eduardo Saiz,
Ravi K. Nalla,
Antoni P. Tomsia
Abstract:
Materials that are strong, ultra-light weight and tough are in demand for a range of applications, requiring architectures and components carefully designed from the micrometer down to nanometer scales. Nacre-a structure found in many molluscan shells-and bone are frequently used as examples for how nature achieves this through hybrid organic-inorganic composites. Unfortunately, it has proven extr…
▽ More
Materials that are strong, ultra-light weight and tough are in demand for a range of applications, requiring architectures and components carefully designed from the micrometer down to nanometer scales. Nacre-a structure found in many molluscan shells-and bone are frequently used as examples for how nature achieves this through hybrid organic-inorganic composites. Unfortunately, it has proven extremely difficult to transcribe nacre-like clever designs into synthetic materials, partly because their intricate structures need to be replicated at several length scales. We demonstrate how the physics of ice formation can be used to develop sophisticated porous and layered-hybrid materials, including artificial bone, ceramic/metal composites, and porous scaffolds for osseous tissue regeneration with strengths up to four times higher than those currently used for implantation.
△ Less
Submitted 11 October, 2017;
originally announced October 2017.
-
Architectural control of freeze-cast ceramics through additives and templating
Authors:
Etienne Munch,
Eduardo Saiz,
Antoni P. Tomsia,
Sylvain Deville
Abstract:
The freezing of concentrated colloidal suspensions is a complex physical process involving a large number of parameters. These parameters provide unique tools to manipulate the architecture of freeze-cast materials at multiple length scales in a single processing step. However, we are still far from develo** predictive models to describe the growth of ice crystals in concentrated particle slurri…
▽ More
The freezing of concentrated colloidal suspensions is a complex physical process involving a large number of parameters. These parameters provide unique tools to manipulate the architecture of freeze-cast materials at multiple length scales in a single processing step. However, we are still far from develo** predictive models to describe the growth of ice crystals in concentrated particle slurries. In order to exert reliable control over the microstructural formation of freeze-cast materials, it is necessary to reach a deeper understanding of the basic relationships between the experimental conditions and the microstructure of the growing solid. In this work, we explore the role of several processing variables (e.g., composition of the suspension, freezing rate, and patterning of the freezing surface) that could affect the formulation strategies for the architectural manipulation of freeze-cast materials. We also demonstrate, using freeze-cast lamellar structures, how reducing the lamellar thickness by less than half increases compressive strength by more than one order of magnitude.
△ Less
Submitted 11 October, 2017;
originally announced October 2017.
-
Featuring dark coronal structures: physical signatures of filaments and coronal holes for automated recognition
Authors:
Judith Palacios,
Consuelo Cid,
Elena Saiz,
Yolanda Cerrato,
Antonio Guerrero
Abstract:
Filaments may be mistaken for coronal holes when observed in extreme ultraviolet (EUV) images; however, a closer and more careful look reveals that their photometric properties are different. The combination of EUV images with photospheric magnetograms shows some characteristic differences between filaments and coronal holes. We have performed analyses with 7 different SDO/AIA wavelengths (94, 131…
▽ More
Filaments may be mistaken for coronal holes when observed in extreme ultraviolet (EUV) images; however, a closer and more careful look reveals that their photometric properties are different. The combination of EUV images with photospheric magnetograms shows some characteristic differences between filaments and coronal holes. We have performed analyses with 7 different SDO/AIA wavelengths (94, 131, 171, 211, 193, 304, 335~Å) and SDO/HMI magnetograms obtained in September 2011 and March 2012 to study coronal holes and filaments from the photometric, magnetic, and also geometric point of view, since projection effects play an important role on the aforementioned traits.
△ Less
Submitted 3 April, 2017;
originally announced April 2017.
-
The Spanish Space Weather Service SeNMEs. A case study on the Sun-Earth chain
Authors:
J. Palacios,
C. Cid,
A. Guerrero,
E. Saiz,
Y. Cerrato,
M. Rodríguez-Bouza,
I. Rodríguez-Bilbao,
M. Herraiz,
G. Rodríguez-Caderot
Abstract:
The Spanish Space Weather Service SeNMEs, \url{www.senmes.es}, is a portal created by the SRG-SW of the Universidad de Alcalá, Spain, to meet societal needs of near real-time space weather services. This webpage-portal is divided in different sections to fulfill users needs about space weather effects: radio blackouts, solar energetic particle events, geomagnetic storms and presence of geomagnetic…
▽ More
The Spanish Space Weather Service SeNMEs, \url{www.senmes.es}, is a portal created by the SRG-SW of the Universidad de Alcalá, Spain, to meet societal needs of near real-time space weather services. This webpage-portal is divided in different sections to fulfill users needs about space weather effects: radio blackouts, solar energetic particle events, geomagnetic storms and presence of geomagnetically induced currents. In less than one year of activity, this service has released a daily report concerning the solar current status and interplanetary medium, informing about the chances of a solar perturbation to hit the Earth's environment. There are also two different forecasting tools for geomagnetic storms, and a daily ionospheric map. These tools allow us to nowcast a variety of solar eruptive events and forecast geomagnetic storms and their recovery, including a new local geomagnetic index, LDi{ñ}, along with some specific new scaling. In this paper we also include a case study analysed by SeNMEs. Using different high resolution and cadence data from space-borne solar telescopes SDO, SOHO and GOES, along with ionospheric and geomagnetic data, we describe the Sun-Earth feature chain for the event.
△ Less
Submitted 3 April, 2017;
originally announced April 2017.
-
Flux emergence event underneath a filament
Authors:
J. Palacios,
Y. Cerrato,
C. Cid,
A. Guerrero,
E. Saiz
Abstract:
Flux emergence phenomena are relevant at different temporal and spatial scales. We have studied a flux emergence region underneath a filament. This filament elevated itself smoothly, and the associated CME reached Earth. In this study we investigate the size and amount of flux in the emergence event. The flux emergence site appeared just beneath a filament. The emergence acquired a size of 24 Mm i…
▽ More
Flux emergence phenomena are relevant at different temporal and spatial scales. We have studied a flux emergence region underneath a filament. This filament elevated itself smoothly, and the associated CME reached Earth. In this study we investigate the size and amount of flux in the emergence event. The flux emergence site appeared just beneath a filament. The emergence acquired a size of 24 Mm in half a day. The unsigned magnetic flux density from LOS-magnetograms is around 1 kG at its maximum. The transverse field as well as the filament eruption were also analysed.
△ Less
Submitted 3 April, 2017;
originally announced April 2017.
-
Redefining the boundaries of interplanetary coronal mass ejections from observations at the ecliptic plane
Authors:
C. Cid,
J. Palacios,
E. Saiz,
A. Guerrero
Abstract:
On 2015 January 6-7, an interplanetary coronal mass ejection (ICME) was observed at L1. This event, which can be associated with a weak and slow coronal mass ejection, allows us to discuss on the differences between the boundaries of the magnetic cloud and the compositional boundaries. A fast stream from a solar coronal hole surrounding this ICME offers a unique opportunity to check the boundaries…
▽ More
On 2015 January 6-7, an interplanetary coronal mass ejection (ICME) was observed at L1. This event, which can be associated with a weak and slow coronal mass ejection, allows us to discuss on the differences between the boundaries of the magnetic cloud and the compositional boundaries. A fast stream from a solar coronal hole surrounding this ICME offers a unique opportunity to check the boundaries' process definition and to explain differences between them. Using Wind and ACE data, we perform a complementary analysis involving compositional, magnetic, and kinematic observations providing relevant information regarding the evolution of the ICME as travelling away from the Sun. We propose erosion, at least at the front boundary of the ICME, as the main reason for the difference between the boundaries, and compositional signatures as the most precise diagnostic tool for the boundaries of ICMEs.
△ Less
Submitted 5 September, 2016;
originally announced September 2016.
-
Searching for Carrington-like events and their signatures and triggers
Authors:
Elena Saiz,
Antonio Guerrero,
Consuelo Cid,
Judith Palacios,
Yolanda Cerrato
Abstract:
The Carrington storm in 1859 is considered to be the major geomagnetic disturbance related to solar activity. In a recent paper, Cid et al. (2015) discovered a geomagnetic disturbance case with a profile extraordinarily similar to the disturbance of the Carrington event at Colaba, but at a mid-latitude observatory, leading to a re- interpretation of the 1859 event. Based on those results, this pap…
▽ More
The Carrington storm in 1859 is considered to be the major geomagnetic disturbance related to solar activity. In a recent paper, Cid et al. (2015) discovered a geomagnetic disturbance case with a profile extraordinarily similar to the disturbance of the Carrington event at Colaba, but at a mid-latitude observatory, leading to a re- interpretation of the 1859 event. Based on those results, this paper performs a deep search for other 'Carrington-like' events and analyses interplanetary observations leading to the ground disturbances which emerged from the systematic analysis. The results of this study based on two Carrington-like events (1) reinforce the awareness about the possibility of missing hazardous space weather events as the large H-spike recorded at Colaba by using global geomagnetic indices, (2) argue against the role of the ring current as the major current involved in Carrington-like events, leaving field- aligned currents (FACs) as the main current involved, and (3) propose abrupt southward reversals of IMF along with high solar wind pressure as the interplanetary trigger of a Carrington-like event.
△ Less
Submitted 21 January, 2016;
originally announced January 2016.
-
Supergranular-scale magnetic flux emergence beneath an unstable filament
Authors:
J. Palacios,
C. Cid,
A. Guerrero,
E. Saiz,
Y. Cerrato
Abstract:
Here we report evidence of a large solar filament eruption on 2013, September 29. This smooth eruption, which passed without any previous flare, formed after a two-ribbon flare and a coronal mass ejection towards Earth. The coronal mass ejection generated a moderate geomagnetic storm on 2013, October 2 with very serious localized effects. The whole event passed unnoticed to flare-warning systems.…
▽ More
Here we report evidence of a large solar filament eruption on 2013, September 29. This smooth eruption, which passed without any previous flare, formed after a two-ribbon flare and a coronal mass ejection towards Earth. The coronal mass ejection generated a moderate geomagnetic storm on 2013, October 2 with very serious localized effects. The whole event passed unnoticed to flare-warning systems.
We have conducted multi-wavelength analyses of the Solar Dynamics Observatory through Atmospheric Imaging Assembly (AIA) and Helioseismic and Magnetic Imager (HMI) data. The AIA data on 304, 193, 211, and 94 Åsample the transition region and the corona, respectively, while HMI provides photospheric magnetograms, continuum, and linear polarization data, in addition to the fully inverted data provided by HMI.
[...]
We have observed a supergranular-sized emergence close to a large filament in the boundary of the active region NOAA11850. Filament dynamics and magnetogram results suggest that the magnetic flux emergence takes place in the photospheric level below the filament. Reconnection occurs underneath the filament between the dipped lines that support the filament and the supergranular emergence. The very smooth ascent is probably caused by this emergence and torus instability may play a fundamental role, which is helped by the emergence.
△ Less
Submitted 18 September, 2015;
originally announced September 2015.
-
A Carrington-like geomagnetic storm observed in the 21st century
Authors:
C. Cid,
E. Saiz,
A. Guerrero,
J. Palacios,
Y. Cerrato
Abstract:
In September 1859 the Colaba observatory measured the most extreme geomagnetic disturbance ever recorded at low latitudes related to solar activity: the Carrington storm. This paper describes a geomagnetic disturbance case with a profile extraordinarily similar to the disturbance of the Carrington event at Colaba: the event on 29 October 2003 at Tihany magnetic observatory in Hungary. The analysis…
▽ More
In September 1859 the Colaba observatory measured the most extreme geomagnetic disturbance ever recorded at low latitudes related to solar activity: the Carrington storm. This paper describes a geomagnetic disturbance case with a profile extraordinarily similar to the disturbance of the Carrington event at Colaba: the event on 29 October 2003 at Tihany magnetic observatory in Hungary. The analysis of the H-field at different locations during the "Carrington-like" event leads to a re-interpretation of the 1859 event. The major conclusions of the paper are the following: (a) the global Dst or SYM-H, as indices based on averaging, missed the largest geomagnetic disturbance in the 29 October 2003 event and might have missed the 1859 disturbance, since the large spike in the horizontal component (H) of terrestrial magnetic field depends strongly on magnetic local time (MLT); (b) the main cause of the large drop in H recorded at Colaba during the Carrington storm was not the ring current but field-aligned currents (FACs), and (c) the very local signatures of the H-spike imply that a Carrington-like event can occur more often than expected.
△ Less
Submitted 26 May, 2015;
originally announced May 2015.
-
A Hyperbolic Decay of the Dst Index during the Recovery Phase of Intense Geomagnetic Storms
Authors:
J. Aguado,
C. Cid,
E. Saiz,
Y. Cerrato
Abstract:
What one commonly considers for reproducing the recovery phase of magnetosphere, as seen by the Dst index, is exponential function. However, the magnetosphere recovers faster in the first hours than in the late recovery phase. The early steepness followed by the late smoothness in the magnetospheric response is a feature that leads to the proposal of a hyperbolic decay function to reproduce the re…
▽ More
What one commonly considers for reproducing the recovery phase of magnetosphere, as seen by the Dst index, is exponential function. However, the magnetosphere recovers faster in the first hours than in the late recovery phase. The early steepness followed by the late smoothness in the magnetospheric response is a feature that leads to the proposal of a hyperbolic decay function to reproduce the recovery phase, instead of the exponential function. A superposed epoch analysis of recovery phases of intense storms from 1963-2006 was performed, categorizing the storms by their intensity into five subsets. The hyperbolic decay function reproduces experimental data better than what the exponential function does for any subset of storms, which indicates a non-linear coupling between dDst/dt and Dst. Moreover, this kind of mathematical function, where the degree of reduction of the Dst index depends on time, allows for explaining different lifetimes of the physical mechanisms involved in the recovery phase and provides new insights for the modeling of the Dst index.
△ Less
Submitted 20 May, 2014;
originally announced May 2014.
-
Modeling the recovery phase of extreme geomagnetic storms
Authors:
C. Cid,
J. Palacios,
E. Saiz,
Y. Cerrato,
J. Aguado,
A. Guerrero
Abstract:
The recovery phase of the largest storms ever recorded has been studied. These events provide an extraordinary opportunity for two goals: (1) to validate the hyperbolic model by Aguado et al. [2010] for the recovery phase after disturbances as severe as the Carrington event, or that related to the Hydro-Quebec blackout in March 1989, and (2) to check whether the linear relationship between the rec…
▽ More
The recovery phase of the largest storms ever recorded has been studied. These events provide an extraordinary opportunity for two goals: (1) to validate the hyperbolic model by Aguado et al. [2010] for the recovery phase after disturbances as severe as the Carrington event, or that related to the Hydro-Quebec blackout in March 1989, and (2) to check whether the linear relationship between the recovery time and the intensity of the storm still complies. Our results reveal the high accuracy of the hyperbolic decay function to reproduce the recovery phase of the magnetosphere after an extreme storm. Moreover, the characteristic time that takes the magnetosphere to recover depends in an exponential way on the intensity of the storm, as indicated by the relationship between the two parameters involved in the hyperbolic decay. This exponential function can be approached by a linear function when the severity of the storm diminishes.
△ Less
Submitted 19 May, 2014;
originally announced May 2014.
-
Solar sources of the geoeffective events in September 2011
Authors:
J. Palacios,
A. Guerrero,
C. Cid,
E. Saiz,
Y. Cerrato
Abstract:
We investigate the geoeffective events happened from 8 to 20 Sept 2011, analysing the most plausible solar sources of these events, where coronal mass ejections and coronal holes play a fundamental role. The physical properties of the coronal holes, such as area and magnetic field, are studied through the Solar Dynamics Observatory instruments: AIA 193 Å images and HMI longitudinal magnetograms. T…
▽ More
We investigate the geoeffective events happened from 8 to 20 Sept 2011, analysing the most plausible solar sources of these events, where coronal mass ejections and coronal holes play a fundamental role. The physical properties of the coronal holes, such as area and magnetic field, are studied through the Solar Dynamics Observatory instruments: AIA 193 Å images and HMI longitudinal magnetograms. The active regions which are the origin of the coronal mass ejections are analysed in AIA and SoHO-LASCO data.
△ Less
Submitted 8 January, 2014;
originally announced January 2014.
-
Modeling of the self-limited growth in catalytic chemical vapor deposition of graphene
Authors:
HoKwon Kim,
Eduardo Saiz,
Manish Chhowalla,
Cecilia Mattevi
Abstract:
The development of wafer-scale continuous single-crystal graphene layers is key in view of its prospective applications. To this end, here we pave the way for a graphene growth model in the framework of the Langmuir adsorption theory and two dimensional crystallization. In specific, we model the nucleation and growth of graphene on copper using methane as carbon precursor. The model leads to ident…
▽ More
The development of wafer-scale continuous single-crystal graphene layers is key in view of its prospective applications. To this end, here we pave the way for a graphene growth model in the framework of the Langmuir adsorption theory and two dimensional crystallization. In specific, we model the nucleation and growth of graphene on copper using methane as carbon precursor. The model leads to identification of the range of growth parameters (temperature and gas pressures) that uniquely entails the final surface coverage of graphene. This becomes an invaluable tool to address the fundamental problems of continuity of polycrystalline graphene layers, and crystalline grain dimensions. The model shows agreement with the existing experimental data in the literature. On the basis of the "contour map" for graphene growth developed here and existing evidence of optimized growth of large graphene grains, novel insights for engineering wafer-scale continuous graphene films are provided.
△ Less
Submitted 12 April, 2013; v1 submitted 1 February, 2013;
originally announced February 2013.
-
Linking two consecutive nonmerging magnetic clouds with their solar sources
Authors:
S. Dasso,
C. H. Mandrini,
B. Schmieder,
H. Cremades,
C. Cid,
Y. Cerrato,
E. Saiz,
P. Démoulin,
A. N. Zhukov,
L. Rodriguez,
A. Aran,
M. Menvielle,
S. Poedts
Abstract:
On 15 May 2005, a huge interplanetary coronal mass ejection (ICME) was observed near Earth. It triggered one of the most intense geomagnetic storms of solar cycle 23 (Dst peak = -263 nT). This structure has been associated with the two-ribbon flare, filament eruption, and coronal mass ejection originating in active region 10759 (NOAA number). We analyze here the sequence of events, from solar wind…
▽ More
On 15 May 2005, a huge interplanetary coronal mass ejection (ICME) was observed near Earth. It triggered one of the most intense geomagnetic storms of solar cycle 23 (Dst peak = -263 nT). This structure has been associated with the two-ribbon flare, filament eruption, and coronal mass ejection originating in active region 10759 (NOAA number). We analyze here the sequence of events, from solar wind measurements (at 1 AU) and back to the Sun, to understand the origin and evolution of this geoeffective ICME. From a detailed observational study of in situ magnetic field observations and plasma parameters in the interplanetary (IP) medium and the use of appropriate models we propose an alternative interpretation of the IP observations, different to those discussed in previous studies. In our view, the IP structure is formed by two extremely close consecutive magnetic clouds (MCs) that preserve their identity during their propagation through the interplanetary medium. Consequently, we identify two solar events in Hα and EUV which occurred in the source region of the MCs. The timing between solar and IP events, as well as the orientation of the MC axes and their associated solar arcades are in good agreement. Additionally, interplanetary radio type II observations allow the tracking of the multiple structures through inner heliosphere and pin down the interaction region to be located midway between the Sun and the Earth. The chain of observations from the photosphere to interplanetary space is in agreement with this scenario. Our analysis allows the detection of the solar sources of the transients and explains the extremely fast changes of the solar wind due to the transport of two attached (though nonmerging) MCs which affect the magnetosphere.
△ Less
Submitted 21 December, 2012;
originally announced December 2012.
-
Spin-Charge-Lattice Coupling through Resonant Multi-Magnon Excitations in Multiferroic BiFeO3
Authors:
M. O. Ramirez,
A. Kumar,
S. A. Denev,
Y. H. Chu,
J. Seidel,
L. Martin,
S-Y. Yang R. C. Rai,
X. Xue,
J. F. Ihlefeld,
N. Podraza,
E. Saiz,
S. Lee,
J. Klug,
S. W. Cheong,
M. J. Bedzyk,
O. Auciello,
D. G. Schlom,
J. Orenstein,
R. Ramesh,
J. L. Musfeldt,
A. P. Litvinchuk,
V. Gopalan
Abstract:
Spin-charge-lattice coupling mediated by multi-magnon processes is demonstrated in multiferroic BiFeO3. Experimental evidence of two and three magnons excitations as well as multimagnon coupling at electronic energy scales and high temperatures are reported. Temperature dependent Raman experiments show up to five resonant enhancements of the 2-magnon excitation below the Neel temperature. These…
▽ More
Spin-charge-lattice coupling mediated by multi-magnon processes is demonstrated in multiferroic BiFeO3. Experimental evidence of two and three magnons excitations as well as multimagnon coupling at electronic energy scales and high temperatures are reported. Temperature dependent Raman experiments show up to five resonant enhancements of the 2-magnon excitation below the Neel temperature. These are shown to be collective interactions between on-site Fe d-d electronic resonance, phonons and multimagnons
△ Less
Submitted 7 January, 2009; v1 submitted 24 March, 2008;
originally announced March 2008.
-
Two-phonon coupling to the antiferromagnetic phase transition in multiferroic BiFeO3
Authors:
Mariola O. Ramirez,
M. Krishnamurthi,
S. Denev,
A. Kumar,
Seung-Yeul Yang,
Ying-Hao Chu,
Eduardo Saiz,
Jan Seidel,
A. P Pyatakov,
A. Bush,
D. Viehland,
J. Orenstein,
R. Ramesh,
Venkatraman Gopalan
Abstract:
A prominent band centered at around 1000-1300 cm-1 and associated with resonant enhancement of two-phonon Raman scattering is reported in multiferroic BiFeO3 thin films and single crystals. A strong anomaly in this band occurs at the antiferromagnetic Neel temperature. This band is composed of three peaks, assigned to 2A4, 2E8, and 2E9 Raman modes. While all three peaks were found to be sensitiv…
▽ More
A prominent band centered at around 1000-1300 cm-1 and associated with resonant enhancement of two-phonon Raman scattering is reported in multiferroic BiFeO3 thin films and single crystals. A strong anomaly in this band occurs at the antiferromagnetic Neel temperature. This band is composed of three peaks, assigned to 2A4, 2E8, and 2E9 Raman modes. While all three peaks were found to be sensitive to the antiferromagnetic phase transition, the 2E8 mode, in particular, nearly disappears at TN on heating, indicating a strong spin-two phonon coupling in BiFeO3.
△ Less
Submitted 3 December, 2007;
originally announced December 2007.