-
Crossover between electron-phonon and boundary resistance limited thermal relaxation in copper films
Authors:
L. B. Wang,
O. -P. Saira,
D. S. Golubev,
J. P. Pekola
Abstract:
We observe a crossover from electron-phonon (ep) coupling limited energy relaxation to that governed by thermal boundary resistance (pp) in copper films at sub-kelvin temperatures. Our measurement yields a quantitative picture of heat currents, in terms of temperature dependences and magnitudes, in both ep and pp limited regimes, respectively. We show that by adding a third layer in between the co…
▽ More
We observe a crossover from electron-phonon (ep) coupling limited energy relaxation to that governed by thermal boundary resistance (pp) in copper films at sub-kelvin temperatures. Our measurement yields a quantitative picture of heat currents, in terms of temperature dependences and magnitudes, in both ep and pp limited regimes, respectively. We show that by adding a third layer in between the copper film and the substrate, the thermal boundary resistance is increased fourfold, consistent with an assumed series connection of thermal resistances.
△ Less
Submitted 26 March, 2019;
originally announced March 2019.
-
Nanobolometer with Ultralow Noise Equivalent Power
Authors:
R. Kokkoniemi,
J. Govenius,
V. Vesterinen,
R. E. Lake,
A. M. Gunyho,
K. Y. Tan,
S. Simbierowicz,
L. Grönberg,
J. Lehtinen,
M. Prunnila,
J. Hassel,
O. -P. Saira,
M. Möttönen
Abstract:
Since the introduction of bolometers more than a century ago, they have been applied in a broad spectrum of contexts ranging from security and the construction industry to particle physics and astronomy. However, emerging technologies and missions call for faster bolometers with lower noise. Here, we demonstrate a nanobolometer that exhibits roughly an order of magnitude lower noise equivalent pow…
▽ More
Since the introduction of bolometers more than a century ago, they have been applied in a broad spectrum of contexts ranging from security and the construction industry to particle physics and astronomy. However, emerging technologies and missions call for faster bolometers with lower noise. Here, we demonstrate a nanobolometer that exhibits roughly an order of magnitude lower noise equivalent power, $20\textrm{ zW}/\sqrt{\textrm{Hz}}$, than previously reported for any bolometer. Importantly, it is more than an order of magnitude faster than other low-noise bolometers, with a time constant of 30 $μ$s at $60\textrm{ zW}/\sqrt{\textrm{Hz}}$. These results suggest a calorimetric energy resolution of $0.3\textrm{ zJ}=h\times 0.4$ THz with a time constant of 30 $μ$s. Thus the introduced nanobolometer is a promising candidate for future applications requiring extreme precision and speed such as those in astronomy and terahertz photon counting.
△ Less
Submitted 26 June, 2018; v1 submitted 25 June, 2018;
originally announced June 2018.
-
Thermal conductance of Nb thin films at sub-kelvin temperatures
Authors:
A. V. Feshchenko,
O. -P. Saira,
J. T. Peltonen,
J. P. Pekola
Abstract:
We determine the thermal conductance of thin niobium (Nb) wires on a silica substrate in the temperature range of 0.1 - 0.6 K using electron thermometry based on normal metal-insulator-superconductor tunnel junctions. We find that at 0.6 K, the thermal conductance of Nb is two orders of magnitude lower than that of Al in the superconducting state, and two orders of magnitude below the Wiedemann-Fr…
▽ More
We determine the thermal conductance of thin niobium (Nb) wires on a silica substrate in the temperature range of 0.1 - 0.6 K using electron thermometry based on normal metal-insulator-superconductor tunnel junctions. We find that at 0.6 K, the thermal conductance of Nb is two orders of magnitude lower than that of Al in the superconducting state, and two orders of magnitude below the Wiedemann-Franz conductance calculated with the normal state resistance of the wire. The measured thermal conductance exceeds the prediction of the Bardeen-Cooper-Schrieffer theory, and demonstrates a power law dependence on temperature as $T^{4.5}$, instead of an exponential one. At the same time, we monitor the temperature profile of the substrate along the Nb wire to observe possible overheating of the phonon bath. We show that Nb can be successfully used for thermal insulation in a nanoscale circuit while simultaneously providing an electrical connection.
△ Less
Submitted 13 March, 2017; v1 submitted 21 September, 2016;
originally announced September 2016.
-
Dispersive thermometry with a Josephson junction coupled to a resonator
Authors:
O. -P. Saira,
M. Zgirski,
K. L. Viisanen,
D. S. Golubev,
J. P. Pekola
Abstract:
We have embedded a small Josephson junction in a microwave resonator that allows simultaneous dc biasing and dispersive readout. Thermal fluctuations drive the junction into phase diffusion and induce a temperature-dependent shift in the resonance frequency. By sensing the thermal noise of a remote resistor in this manner, we demonstrate primary thermometry in the range from 300 mK to below 100 mK…
▽ More
We have embedded a small Josephson junction in a microwave resonator that allows simultaneous dc biasing and dispersive readout. Thermal fluctuations drive the junction into phase diffusion and induce a temperature-dependent shift in the resonance frequency. By sensing the thermal noise of a remote resistor in this manner, we demonstrate primary thermometry in the range from 300 mK to below 100 mK, and high-bandwidth (7.5 MHz) operation with a noise-equivalent temperature of better than 10 $\mathrm{μK/\sqrt{Hz}}$. At a finite bias voltage close to a Fiske resonance, amplification of the microwave probe signal is observed. We develop an accurate theoretical model of our device based on the theory of dynamical Coulomb blockade.
△ Less
Submitted 21 July, 2016; v1 submitted 18 April, 2016;
originally announced April 2016.
-
Low-temperature characterization of Nb-Cu-Nb weak links with Ar ion-cleaned interfaces
Authors:
R. N. Jabdaraghi,
J. T. Peltonen,
O. -P. Saira,
J. P. Pekola
Abstract:
We characterize niobium-based lateral Superconductor (S) - Normal metal (N) - Superconductor weak links through low-temperature switching current measurements and tunnel spectroscopy. We fabricate the SNS devices in two separate lithography and deposition steps, combined with strong argon ion cleaning before the normal metal deposition in the last step. Our SNS weak link consists of high-quality s…
▽ More
We characterize niobium-based lateral Superconductor (S) - Normal metal (N) - Superconductor weak links through low-temperature switching current measurements and tunnel spectroscopy. We fabricate the SNS devices in two separate lithography and deposition steps, combined with strong argon ion cleaning before the normal metal deposition in the last step. Our SNS weak link consists of high-quality sputtered Nb electrodes that are contacted with evaporated Cu. The two-step fabrication flow enables great flexibility in the choice of materials and pattern design. A comparison of the temperature-dependent equilibrium critical supercurrent with theoretical predictions indicates that the quality of the Nb-Cu interface is similar to that of evaporated Al-Cu weak links. Aiming at increased sensitivity, range of operation temperatures, and thermal isolation, we investigate how these SNS structures can be combined with shadow-evaporated aluminum tunnel junctions for sensor applications that utilize the superconducting proximity effect. To this end, we demonstrate a hybrid magnetic flux sensor based on a Nb-Cu-Nb SNS junction, where the phase-dependent normal metal density of states is probed with an Al tunnel junction.
△ Less
Submitted 14 October, 2015;
originally announced October 2015.
-
Tunnel-Junction Thermometry Down to Millikelvin Temperatures
Authors:
A. V. Feshchenko,
L. Casparis,
I. M. Khaymovich,
D. Maradan,
O. -P. Saira,
M. Palma,
M. Meschke,
J. P. Pekola,
D. M. Zumbühl
Abstract:
We present a simple on-chip electronic thermometer with the potential to operate down to 1 mK. It is based on transport through a single normal-metal - superconductor tunnel junction with rapidly widening leads. The current through the junction is determined by the temperature of the normal electrode that is efficiently thermalized to the phonon bath, and it is virtually insensitive to the tempera…
▽ More
We present a simple on-chip electronic thermometer with the potential to operate down to 1 mK. It is based on transport through a single normal-metal - superconductor tunnel junction with rapidly widening leads. The current through the junction is determined by the temperature of the normal electrode that is efficiently thermalized to the phonon bath, and it is virtually insensitive to the temperature of the superconductor, even when the latter is relatively far from equilibrium. We demonstrate here the operation of the device down to 7 mK and present a systematic thermal analysis.
△ Less
Submitted 28 September, 2015; v1 submitted 15 April, 2015;
originally announced April 2015.
-
Detecting bit-flip errors in a logical qubit using stabilizer measurements
Authors:
D. Ristè,
S. Poletto,
M. -Z. Huang,
A. Bruno,
V. Vesterinen,
O. -P. Saira,
L. DiCarlo
Abstract:
Quantum data is susceptible to decoherence induced by the environment and to errors in the hardware processing it. A future fault-tolerant quantum computer will use quantum error correction (QEC) to actively protect against both. In the smallest QEC codes, the information in one logical qubit is encoded in a two-dimensional subspace of a larger Hilbert space of multiple physical qubits. For each c…
▽ More
Quantum data is susceptible to decoherence induced by the environment and to errors in the hardware processing it. A future fault-tolerant quantum computer will use quantum error correction (QEC) to actively protect against both. In the smallest QEC codes, the information in one logical qubit is encoded in a two-dimensional subspace of a larger Hilbert space of multiple physical qubits. For each code, a set of non-demolition multi-qubit measurements, termed stabilizers, can discretize and signal physical qubit errors without collapsing the encoded information. Experimental demonstrations of QEC to date, using nuclear magnetic resonance, trapped ions, photons, superconducting qubits, and NV centers in diamond, have circumvented stabilizers at the cost of decoding at the end of a QEC cycle. This decoding leaves the quantum information vulnerable to physical qubit errors until re-encoding, violating a basic requirement for fault tolerance. Using a five-qubit superconducting processor, we realize the two parity measurements comprising the stabilizers of the three-qubit repetition code protecting one logical qubit from physical bit-flip errors. We construct these stabilizers as parallelized indirect measurements using ancillary qubits, and evidence their non-demolition character by generating three-qubit entanglement from superposition states. We demonstrate stabilizer-based quantum error detection (QED) by subjecting a logical qubit to coherent and incoherent bit-flip errors on its constituent physical qubits. While increased physical qubit coherence times and shorter QED blocks are required to actively safeguard quantum information, this demonstration is a critical step toward larger codes based on multiple parity measurements.
△ Less
Submitted 20 November, 2014;
originally announced November 2014.
-
Multifractality of random eigenfunctions and generalization of Jarzynski equality
Authors:
I. M. Khaymovich,
J. V. Koski,
O. -P. Saira,
V. E. Kravtsov,
J. P. Pekola
Abstract:
Systems driven out of equilibrium experience large fluctuations of the dissipated work. The same is true for wave function amplitudes in disordered systems close to the Anderson localization transition.\cite{Mirlin-review} In both cases the probability distribution function (PDF) is given by the large deviation ansatz. Here we exploit the analogy between the PDF of work dissipated in a driven sing…
▽ More
Systems driven out of equilibrium experience large fluctuations of the dissipated work. The same is true for wave function amplitudes in disordered systems close to the Anderson localization transition.\cite{Mirlin-review} In both cases the probability distribution function (PDF) is given by the large deviation ansatz. Here we exploit the analogy between the PDF of work dissipated in a driven single-electron box (SEB) and that of random multifractal wave function amplitudes and uncover new relations which generalize the Jarzynski equality. We checked the new relations experimentally by measuring the dissipated work in a driven SEB and found a remarkable correspondence. The results represent an important universal feature of the work statistics in systems out of equilibrium and help to understand the nature of the symmetry of multifractal exponents in the theory of Anderson localization.
△ Less
Submitted 18 March, 2015; v1 submitted 7 November, 2014;
originally announced November 2014.
-
Fast electron thermometry towards ultra-sensitive calorimetric detection
Authors:
S. Gasparinetti,
K. L. Viisanen,
O. -P. Saira,
T. Faivre,
M. Arzeo,
M. Meschke,
J. P. Pekola
Abstract:
We demonstrate radiofrequency thermometry on a micrometer-sized metallic island below 100 mK. Our device is based on a normal metal-insulator-superconductor tunnel junction coupled to a resonator with transmission readout. In the first generation of the device, we achieve 90 μK/Hz^1/2 noise-equivalent temperature with 10 MHz bandwidth. We measure the thermal relaxation time of the electron gas in…
▽ More
We demonstrate radiofrequency thermometry on a micrometer-sized metallic island below 100 mK. Our device is based on a normal metal-insulator-superconductor tunnel junction coupled to a resonator with transmission readout. In the first generation of the device, we achieve 90 μK/Hz^1/2 noise-equivalent temperature with 10 MHz bandwidth. We measure the thermal relaxation time of the electron gas in the island, which we find to be of the order of 100 μs. Such a calorimetric detector, upon optimization, can be seamlessly integrated into superconducting circuits, with immediate applications in quantum-thermodynamics experiments down to single quanta of energy.
△ Less
Submitted 4 November, 2014; v1 submitted 29 May, 2014;
originally announced May 2014.
-
Mitigating information leakage in a crowded spectrum of weakly anharmonic qubits
Authors:
V. Vesterinen,
O. -P. Saira,
A. Bruno,
L. DiCarlo
Abstract:
A challenge for scaling up quantum processors using frequency-crowded, weakly anharmonic qubits is to drive individual qubits without causing leakage into non-computational levels of the others, while also minimizing the number of control lines. To address this, we implement single-qubit Wah-Wah control in a circuit QED processor with a single feedline for all transmon qubits, operating at the max…
▽ More
A challenge for scaling up quantum processors using frequency-crowded, weakly anharmonic qubits is to drive individual qubits without causing leakage into non-computational levels of the others, while also minimizing the number of control lines. To address this, we implement single-qubit Wah-Wah control in a circuit QED processor with a single feedline for all transmon qubits, operating at the maximum gate speed achievable given the frequency crowding. Randomized benchmarking and quantum process tomography confirm alternating qubit control with $\leq$1% average error per computational step and decoherence-limited idling of one qubit while driving another with a Wah-Wah pulse train.
△ Less
Submitted 11 May, 2014; v1 submitted 2 May, 2014;
originally announced May 2014.
-
Entanglement genesis by ancilla-based parity measurement in 2D circuit QED
Authors:
O. -P. Saira,
J. P. Groen,
J. Cramer,
M. Meretska,
G. de Lange,
L. DiCarlo
Abstract:
We present an indirect two-qubit parity meter in planar circuit quantum electrodynamics, realized by discrete interaction with an ancilla and a subsequent projective ancilla measurement with a dedicated, dispersively coupled resonator. Quantum process tomography and successful entanglement by measurement demonstrate that the meter is intrinsically quantum non-demolition. Separate interaction and m…
▽ More
We present an indirect two-qubit parity meter in planar circuit quantum electrodynamics, realized by discrete interaction with an ancilla and a subsequent projective ancilla measurement with a dedicated, dispersively coupled resonator. Quantum process tomography and successful entanglement by measurement demonstrate that the meter is intrinsically quantum non-demolition. Separate interaction and measurement steps allow commencing subsequent data qubit operations in parallel with ancilla measurement, offering time savings over continuous schemes.
△ Less
Submitted 21 November, 2013;
originally announced November 2013.
-
Distribution of Entropy Production in a Single-Electron Box
Authors:
J. V. Koski,
T. Sagawa,
O. -P. Saira,
Y. Yoon,
A. Kutvonen,
P. Solinas,
M. Möttönen,
T. Ala-Nissila,
J. P. Pekola
Abstract:
Recently, the fundamental laws of thermodynamics have been reconsidered for small systems. The discovery of the fluctuation relations has spurred theoretical and experimental studies on thermodynamics of systems with few degrees of freedom. The concept of entropy production has been extended to the microscopic level by considering stochastic trajectories of a system coupled to a heat bath. However…
▽ More
Recently, the fundamental laws of thermodynamics have been reconsidered for small systems. The discovery of the fluctuation relations has spurred theoretical and experimental studies on thermodynamics of systems with few degrees of freedom. The concept of entropy production has been extended to the microscopic level by considering stochastic trajectories of a system coupled to a heat bath. However, the experimental observation of the microscopic entropy production remains elusive. We measure distributions of the microscopic entropy production in a single-electron box consisting of two islands with a tunnel junction. The islands are coupled to separate heat baths at different temperatures, maintaining a steady thermal non-equilibrium. As Jarzynski equality between work and free energy is not applicable in this case, the entropy production becomes the relevant parameter. We verify experimentally that the integral and detailed fluctuation relations are satisfied. Furthermore, the coarse-grained entropy production from trajectories of electronic transitions is related to the bare entropy production by a universal formula. Our results reveal the fundamental roles of irreversible entropy production in non-equilibrium small systems.
△ Less
Submitted 28 March, 2013; v1 submitted 26 March, 2013;
originally announced March 2013.
-
Single-electron current sources: towards a refined definition of ampere
Authors:
J. P. Pekola,
O. -P. Saira,
V. F. Maisi,
A. Kemppinen,
M. Möttönen,
Yu. A. Pashkin,
D. V. Averin
Abstract:
Controlling electrons at the level of elementary charge $e$ has been demonstrated experimentally already in the 1980's. Ever since, producing an electrical current $ef$, or its integer multiple, at a drive frequency $f$ has been in a focus of research for metrological purposes. In this review we first discuss the generic physical phenomena and technical constraints that influence charge transport.…
▽ More
Controlling electrons at the level of elementary charge $e$ has been demonstrated experimentally already in the 1980's. Ever since, producing an electrical current $ef$, or its integer multiple, at a drive frequency $f$ has been in a focus of research for metrological purposes. In this review we first discuss the generic physical phenomena and technical constraints that influence charge transport. We then present the broad variety of proposed realizations. Some of them have already proven experimentally to nearly fulfill the demanding needs, in terms of transfer errors and transfer rate, of quantum metrology of electrical quantities, whereas some others are currently "just" wild ideas, still often potentially competitive if technical constraints can be lifted. We also discuss the important issues of read-out of single-electron events and potential error correction schemes based on them. Finally, we give an account of the status of single-electron current sources in the bigger framework of electric quantum standards and of the future international SI system of units, and briefly discuss the applications and uses of single-electron devices outside the metrological context.
△ Less
Submitted 1 September, 2012; v1 submitted 20 August, 2012;
originally announced August 2012.
-
Test of Jarzynski and Crooks fluctuation relations in an electronic system
Authors:
O. -P. Saira,
Y. Yoon,
T. Tanttu,
M. Möttönen,
D. V. Averin,
J. P. Pekola
Abstract:
Recent progress on micro- and nanometer scale manipulation has opened the possibility to probe systems small enough that thermal fluctuations of energy and coordinate variables can be significant compared with their mean behavior. We present an experimental study of nonequilibrium thermodynamics in a classical two-state system, namely a metallic single-electron box. We have measured with high stat…
▽ More
Recent progress on micro- and nanometer scale manipulation has opened the possibility to probe systems small enough that thermal fluctuations of energy and coordinate variables can be significant compared with their mean behavior. We present an experimental study of nonequilibrium thermodynamics in a classical two-state system, namely a metallic single-electron box. We have measured with high statistical accuracy the distribution of dissipated energy as single electrons are transferred between the box electrodes. The obtained distributions obey Jarzynski and Crooks fluctuation relations. A comprehensive microscopic theory exists for the system, enabling the experimental distributions to be reproduced without fitting parameters.
△ Less
Submitted 13 September, 2012; v1 submitted 29 June, 2012;
originally announced June 2012.
-
Work, free energy and dissipation in voltage driven single-electron transitions
Authors:
J. P. Pekola,
O. -P. Saira
Abstract:
We apply the general procedure presented by Jarzynski in [1] to the problem of dissipation in a voltage-driven single-electron box. We obtain the expression of dissipated work, and find its relation to the dissipation Q obtained in [2]. We show that the two quantities are identical in common gate protocols where the system makes a transition for sure.
We apply the general procedure presented by Jarzynski in [1] to the problem of dissipation in a voltage-driven single-electron box. We obtain the expression of dissipated work, and find its relation to the dissipation Q obtained in [2]. We show that the two quantities are identical in common gate protocols where the system makes a transition for sure.
△ Less
Submitted 28 June, 2012; v1 submitted 20 April, 2012;
originally announced April 2012.
-
Long hold times in a two-junction electron trap
Authors:
A. Kemppinen,
S. V. Lotkhov,
O. -P. Saira,
A. B. Zorin,
J. P. Pekola,
A. J. Manninen
Abstract:
The hold time $τ$ of a single-electron trap is shown to increase significantly due to suppression of environmentally assisted tunneling events. Using two rf-tight radiation shields instead of a single one, we demonstrate increase of $τ$ by a factor exceeding $10^3$, up to about 10 hours, for a trap with only two superconductor (S) -- normal-metal (N) tunnel junctions and an on-chip resistor $R$ (R…
▽ More
The hold time $τ$ of a single-electron trap is shown to increase significantly due to suppression of environmentally assisted tunneling events. Using two rf-tight radiation shields instead of a single one, we demonstrate increase of $τ$ by a factor exceeding $10^3$, up to about 10 hours, for a trap with only two superconductor (S) -- normal-metal (N) tunnel junctions and an on-chip resistor $R$ (R-SNS structure). In the normal state, the improved shielding made it possible to observe $τ\sim$ 100 s, which is in reasonable agreement with the quantum-leakage-limited level expected for the two-electron cotunneling process.
△ Less
Submitted 8 August, 2011;
originally announced August 2011.
-
Vanishing quasiparticle density in a hybrid Al/Cu/Al single-electron transistor
Authors:
O. -P. Saira,
A. Kemppinen,
V. F. Maisi,
J. P. Pekola
Abstract:
The achievable fidelity of many nanoelectronic devices based on superconducting aluminum is limited by either the density of residual nonequilibrium quasiparticles n_qp or the density of quasiparticle states in the gap, characterized by Dynes parameter γ. We infer upper bounds n_qp < 0.033 um^-3 and γ< 1.6*10^-7 from transport measurements performed on Al/AlOx/Cu single-electron transistors, impro…
▽ More
The achievable fidelity of many nanoelectronic devices based on superconducting aluminum is limited by either the density of residual nonequilibrium quasiparticles n_qp or the density of quasiparticle states in the gap, characterized by Dynes parameter γ. We infer upper bounds n_qp < 0.033 um^-3 and γ< 1.6*10^-7 from transport measurements performed on Al/AlOx/Cu single-electron transistors, improving previous results by an order of magnitude. Owing to efficient microwave shielding and quasiparticle relaxation, typical number of quasiparticles in the superconducting leads is zero.
△ Less
Submitted 4 January, 2012; v1 submitted 7 June, 2011;
originally announced June 2011.
-
Real-time observation of discrete Andreev tunneling events
Authors:
V. F. Maisi,
O. -P. Saira,
Yu. A. Pashkin,
J. S. Tsai,
D. V. Averin,
J. P. Pekola
Abstract:
We provide a direct proof of two-electron Andreev transitions in a superconductor - normal metal tunnel junction by detecting them in a real-time electron counting experiment. Our results are consistent with ballistic Andreev transport with an order of magnitude higher rate than expected for a uniform barrier, suggesting that only part of the interface is effectively contributing to the transport.…
▽ More
We provide a direct proof of two-electron Andreev transitions in a superconductor - normal metal tunnel junction by detecting them in a real-time electron counting experiment. Our results are consistent with ballistic Andreev transport with an order of magnitude higher rate than expected for a uniform barrier, suggesting that only part of the interface is effectively contributing to the transport. These findings are quantitatively supported by our direct current measurements in single-electron transistors with similar tunnel barriers.
△ Less
Submitted 1 March, 2011; v1 submitted 28 December, 2010;
originally announced December 2010.
-
Environmentally Activated Tunneling Events in a Hybrid Single-Electron Box
Authors:
O. -P. Saira,
M. Mottonen,
V. F. Maisi,
J. P. Pekola
Abstract:
We have measured individual tunneling events and Coulomb step shapes in single-electron boxes with opaque superconductor-normal metal tunnel junctions. We observe anomalous broadening of the Coulomb step with decreasing temperature in a manner that is consistent with activation of first-order tunneling events by an external dissipative electromagnetic environment. We demonstrate that the rates for…
▽ More
We have measured individual tunneling events and Coulomb step shapes in single-electron boxes with opaque superconductor-normal metal tunnel junctions. We observe anomalous broadening of the Coulomb step with decreasing temperature in a manner that is consistent with activation of first-order tunneling events by an external dissipative electromagnetic environment. We demonstrate that the rates for energetically unfavourable tunneling events saturate to finite values at low temperatures, and that the saturation level can be suppressed by more than an order of magnitude by a capacitive shunt near the device. The findings are important in assessing the performance limits of any single-electronic device. In particular, master equation based simulations show that the electromagnetic environment realized in the capacitively shunted devices allows for a metrologically accurate charge pump based on hybrid tunnnel junctions.
△ Less
Submitted 29 September, 2010; v1 submitted 2 June, 2010;
originally announced June 2010.
-
Photon assisted tunneling as an origin of the Dynes density of states
Authors:
J. P. Pekola,
V. F. Maisi,
S. Kafanov,
N. Chekurov,
A. Kemppinen,
Yu. A. Pashkin,
O. -P. Saira,
M. Mottonen,
J. S. Tsai
Abstract:
We show that the effect of a high-temperature environment in current transport through a normal metal-insulator-superconductor tunnel junction can be described by an effective density of states (DOS) in the superconductor. In the limit of a resistive low-ohmic environment, this DOS reduces into the well-known Dynes form. Our theoretical result is supported by experiments in engineered environments…
▽ More
We show that the effect of a high-temperature environment in current transport through a normal metal-insulator-superconductor tunnel junction can be described by an effective density of states (DOS) in the superconductor. In the limit of a resistive low-ohmic environment, this DOS reduces into the well-known Dynes form. Our theoretical result is supported by experiments in engineered environments. We apply our findings to improve the performance of a single-electron turnstile, a potential candidate for a metrological current source.
△ Less
Submitted 6 August, 2010; v1 submitted 21 January, 2010;
originally announced January 2010.