-
Effect of Strain on the Band Gap of Monolayer MoS$_2$
Authors:
Raj K. Sah,
Hong Tang,
Chandra Shahi,
Adrienn Ruzsinszky,
John P. Perdew
Abstract:
Monolayer $\mathrm{MoS_2}$ under strain has many interesting properties and possible applications in technology. A recent experimental study examined the effect of strain on the bandgap of monolayer $\mathrm{MoS_2}$ on a mildly curved graphite surface, reporting that under biaxial strain with a Poisson's ratio of 0.44, the bandgap decreases at a rate of 400 meV/% strain. In this work, we performed…
▽ More
Monolayer $\mathrm{MoS_2}$ under strain has many interesting properties and possible applications in technology. A recent experimental study examined the effect of strain on the bandgap of monolayer $\mathrm{MoS_2}$ on a mildly curved graphite surface, reporting that under biaxial strain with a Poisson's ratio of 0.44, the bandgap decreases at a rate of 400 meV/% strain. In this work, we performed density functional theory (DFT) calculations for a free-standing $\mathrm{MoS_2}$ monolayer, using the generalized gradient approximation (GGA) PBE, the hybrid functional HSE06, and many-body perturbation theory with the GW approximation using PBE wavefunctions (G0W0@PBE). We found that under biaxial strain with the experimental Poisson's ratio, the bandgap decreases at rates of 63 meV/% strain (PBE), 73 meV/% strain (HSE06), and 43 meV/% strain (G0W0@PBE), which are significantly smaller than the experimental rate. We also found that PBE predicts a similarly smaller rate (90 meV/% strain) for a different Poisson's ratio of 0.25. Spin-orbit correction (SOC) has little effect on the gap or its strain dependence. Additionally, we observed a semiconductor-to-metal transition under an equal tensile biaxial strain of 10% and a transition from a direct to an indirect bandgap, consistent with previous theoretical work.
△ Less
Submitted 11 June, 2024; v1 submitted 10 June, 2024;
originally announced June 2024.
-
Depth-resolved profile of the interfacial ferromagnetism in $CaMnO_{3}/CaRuO_{3}$ superlattices
Authors:
J. R. Paudel,
A. Mansouri Tehrani,
M. Terilli,
M. Kareev,
J. Grassi,
R. K. Sah,
L. Wu,
V. N. Strocov,
C. Klewe,
P. Shafer,
J. Chakhalian,
N. A. Spaldin,
A. X. Gray
Abstract:
Emergent magnetic phenomena at interfaces represent a frontier in materials science, pivotal for advancing technologies in spintronics and magnetic storage. In this letter, we utilize a suite of advanced X-ray spectroscopic and scattering techniques to investigate emergent interfacial ferromagnetism in oxide superlattices comprised of antiferromagnetic CaMnO3 and paramagnetic CaRuO3. Our findings…
▽ More
Emergent magnetic phenomena at interfaces represent a frontier in materials science, pivotal for advancing technologies in spintronics and magnetic storage. In this letter, we utilize a suite of advanced X-ray spectroscopic and scattering techniques to investigate emergent interfacial ferromagnetism in oxide superlattices comprised of antiferromagnetic CaMnO3 and paramagnetic CaRuO3. Our findings challenge prior theoretical models by demonstrating that the ferromagnetism extends beyond the interfacial layer into multiple unit cells of CaMnO3 and exhibits an asymmetric profile. Complementary density functional calculations reveal that the interfacial ferromagnetism is driven by the double exchange mechanism, facilitated by charge transfer from Ru to Mn ions. Additionally, defect chemistry, particularly the presence of oxygen vacancies, likely plays a crucial role in modifying the magnetic moments at the interface, leading to the observed asymmetry between the top and bottom CaMnO3 interfacial magnetic layers. Our findings underscore the potential of manipulating interfacial ferromagnetism through point defect engineering.
△ Less
Submitted 2 May, 2024;
originally announced May 2024.
-
Imprints of Supermassive Black Hole Evolution on the Spectral and Spatial Anisotropy of Nano-Hertz Stochastic Gravitational-Wave Background
Authors:
Mohit Raj Sah,
Suvodip Mukherjee,
Vida Saeedzadeh,
Arif Babul,
Michael Tremmel,
Thomas R. Quinn
Abstract:
The formation and evolution of supermassive black holes (SMBHs) remains an open question in the field of modern cosmology. The detection of nanohertz (n-Hz) gravitational waves via pulsar timing arrays (PTAs) in the form of individual events and the stochastic gravitational wave background (SGWB) offers a promising avenue for studying SMBH formation across cosmic time, with SGWB signal being the i…
▽ More
The formation and evolution of supermassive black holes (SMBHs) remains an open question in the field of modern cosmology. The detection of nanohertz (n-Hz) gravitational waves via pulsar timing arrays (PTAs) in the form of individual events and the stochastic gravitational wave background (SGWB) offers a promising avenue for studying SMBH formation across cosmic time, with SGWB signal being the immediately detectable signal with the currently accessible telescope sensitivities. By connecting the galaxy properties in the large scale (Gpc scale) cosmological simulation such as \texttt{MICECAT} with the small scale ($\sim$ Mpc scale) galaxy simulations from \texttt{ROMULUS}, we show that different scenarios of galaxy--SMBHs evolution with redshift leads to a frequency-dependent spatial anisotropy in the SGWB signal. The presence of slow evolution of the SMBHs in the Universe leads to a pronounced blue anisotropic spectrum of the SGWB. In contrast, if SMBHs grow faster in the Universe in lighter galaxies, the frequency-dependent spatial anisotropy exhibits a more flattened anisotropic spectrum. This additional aspect of the SGWB signal on top of the monopole SGWB signal, can give insight on how the SMBHs form in the high redshift Universe and its interplay with the galaxy formation from future measurements.
△ Less
Submitted 22 April, 2024;
originally announced April 2024.
-
Meta-GGAs vs. Hybrid Functionals for Point Defects: The Best of Both Worlds Applied to Layered MnO$_2$, NiO$_2$ and KCoO$_2$
Authors:
Raj K. Sah,
Michael J. Zdilla,
Eric Borguet,
John P. Perdew
Abstract:
Defects in a material can significantly tune properties and enhance utility. Hybrid functionals like HSE06 are often used to describe solids with such defects. However, geometry optimization (including accounting for effects such as Jahn-Teller distortion) using hybrid functionals is challenging for the large supercells needed for defect study. The proposed r$^2$SCAN+rVV10+U+$\mathrm{U_d}$ method,…
▽ More
Defects in a material can significantly tune properties and enhance utility. Hybrid functionals like HSE06 are often used to describe solids with such defects. However, geometry optimization (including accounting for effects such as Jahn-Teller distortion) using hybrid functionals is challenging for the large supercells needed for defect study. The proposed r$^2$SCAN+rVV10+U+$\mathrm{U_d}$ method, which is computationally much cheaper and faster than hybrid functionals, can successfully describe defects in materials with the proper choice of U (for the d orbitals of the host atom) and $\mathrm{U_d}$ (for those of the defect atom), as shown here for small polaron defects in layered transition-metal oxides. We use a literature value of U or $\mathrm{U_d}$ appropriate to a given transition-metal ion and its oxidation state. The layered materials birnessite ($\mathrm{K_nMnO_2}, n=0.03 $) and $\mathrm{K_nNiO_2},n=0.03$, with one K atom intercalated between layers in a supercell, are found to have one localized occupied $\mathrm{e_g}$ polaronic state on the transition metal ion reduced by the insertion of the K atom, when the geometry is calculated as above using published U values. The expected Jahn-Teller distortion is not observed when U=$\mathrm{U_d}$=0. Layered cobalt oxide with additional potassium ions intercalated ($\mathrm{K_nCoO_2},n=1.03$) is different, due to a dramatic difference in electronic configuration of the defected Co(II) ion: A single extra K atom in the supercell leads to four localized electrons in the band gap, using standard U values, and even for U=$\mathrm{U_d}$=0.
△ Less
Submitted 11 June, 2024; v1 submitted 22 April, 2024;
originally announced April 2024.
-
AipanVR: A Virtual Reality Experience for Preserving Uttarakhand's Traditional Art Form
Authors:
Nishant Chaudhary,
Mihir Raj,
Richik Bhattacharjee,
Anmol Srivastava,
Rakesh Sah,
Pankaj Badoni
Abstract:
This paper presents a demonstration of the developed prototype showcasing a way to preserve the Intangible Cultural Heritage of Uttarakhand, India. Aipan is a traditional art form practiced in the Kumaon region in the state of Uttarakhand. It is typically used to decorate floors and walls at places of worship or entrances of homes and is considered auspicious to begin any work or event. This art i…
▽ More
This paper presents a demonstration of the developed prototype showcasing a way to preserve the Intangible Cultural Heritage of Uttarakhand, India. Aipan is a traditional art form practiced in the Kumaon region in the state of Uttarakhand. It is typically used to decorate floors and walls at places of worship or entrances of homes and is considered auspicious to begin any work or event. This art is associated with a great degree of social, cultural as well as religious significance and is passed from generation to generation. However, in the present era of modernization and technological advancements, this art form now stands on the verge of depletion. This study presents a humble attempt to preserve this vanishing art form through the use of Virtual Reality (VR). Ethnographic studies were conducted in Almora, Nainital, and Haldwani regions of Uttarakhand to trace the origins as well as to gain a deeper understanding of this art form. A total of ten (N =10) Aipan designers were interviewed. Several interesting insights are revealed through these studies that show the potential to be incorporated as a VR experience.
△ Less
Submitted 19 April, 2024;
originally announced April 2024.
-
Ultralight vector dark matter search using data from the KAGRA O3GK run
Authors:
The LIGO Scientific Collaboration,
the Virgo Collaboration,
the KAGRA Collaboration,
A. G. Abac,
R. Abbott,
H. Abe,
I. Abouelfettouh,
F. Acernese,
K. Ackley,
C. Adamcewicz,
S. Adhicary,
N. Adhikari,
R. X. Adhikari,
V. K. Adkins,
V. B. Adya,
C. Affeldt,
D. Agarwal,
M. Agathos,
O. D. Aguiar,
I. Aguilar,
L. Aiello,
A. Ain,
P. Ajith,
T. Akutsu,
S. Albanesi
, et al. (1778 additional authors not shown)
Abstract:
Among the various candidates for dark matter (DM), ultralight vector DM can be probed by laser interferometric gravitational wave detectors through the measurement of oscillating length changes in the arm cavities. In this context, KAGRA has a unique feature due to differing compositions of its mirrors, enhancing the signal of vector DM in the length change in the auxiliary channels. Here we prese…
▽ More
Among the various candidates for dark matter (DM), ultralight vector DM can be probed by laser interferometric gravitational wave detectors through the measurement of oscillating length changes in the arm cavities. In this context, KAGRA has a unique feature due to differing compositions of its mirrors, enhancing the signal of vector DM in the length change in the auxiliary channels. Here we present the result of a search for $U(1)_{B-L}$ gauge boson DM using the KAGRA data from auxiliary length channels during the first joint observation run together with GEO600. By applying our search pipeline, which takes into account the stochastic nature of ultralight DM, upper bounds on the coupling strength between the $U(1)_{B-L}$ gauge boson and ordinary matter are obtained for a range of DM masses. While our constraints are less stringent than those derived from previous experiments, this study demonstrates the applicability of our method to the lower-mass vector DM search, which is made difficult in this measurement by the short observation time compared to the auto-correlation time scale of DM.
△ Less
Submitted 5 March, 2024;
originally announced March 2024.
-
Minimum-Cost Sensor Channel Selection For Wearable Computing
Authors:
Ramesh Kumar Sah,
Hassan Ghasemzadeh
Abstract:
Sensor systems are constrained by design and finding top sensor channel(s) for a given computational task is an important but hard problem. We define an optimization framework and mathematically formulate the minimum-cost channel selection problem. We then propose two novel algorithms of varying scope and complexity to solve the optimization problem. Branch and bound channel selection finds a glob…
▽ More
Sensor systems are constrained by design and finding top sensor channel(s) for a given computational task is an important but hard problem. We define an optimization framework and mathematically formulate the minimum-cost channel selection problem. We then propose two novel algorithms of varying scope and complexity to solve the optimization problem. Branch and bound channel selection finds a globally optimal channel subset and the greedy channel selection finds the best intermediate subset based on the value of a score function. Proposed channel selection algorithms are conditioned with performance as well as the cost of the channel subset. We evaluate both algorithms on two publicly available time series datasets of human activity recognition and mental task detection. Branch and bound channel selection achieved a cost saving of up to 94.8% and the greedy search reduced the cost by 89.6% while maintaining performance thresholds.
△ Less
Submitted 10 January, 2024;
originally announced February 2024.
-
Non-Stationary Astrophysical Stochastic Gravitational-Wave Background: A New Probe to the High Redshift Population of Binary Black Holes
Authors:
Mohit Raj Sah,
Suvodip Mukherjee
Abstract:
The astrophysical Stochastic Gravitational Wave Background (SGWB) originates from the mergers of compact binary objects that are otherwise undetected as individual events, along with other sources such as supernovae, magnetars, etc. The individual GW signal is time-varying over a time scale that depends on the chirp mass of the coalescing binaries. Another timescale that plays a role is the timesc…
▽ More
The astrophysical Stochastic Gravitational Wave Background (SGWB) originates from the mergers of compact binary objects that are otherwise undetected as individual events, along with other sources such as supernovae, magnetars, etc. The individual GW signal is time-varying over a time scale that depends on the chirp mass of the coalescing binaries. Another timescale that plays a role is the timescale at which the sources repeat, which depends on the merger rate. The combined effect of these two leads to a breakdown of the time-translation symmetry of the observed SGWB and a correlation between different frequency modes in the signal covariance matrix of the SGWB. Using an ensemble of SGWB due to binary black hole coalescence, calculated using simulations of different black hole mass distributions and merger rates, we show how the structure of the signal covariance matrix varies. This structure in the signal covariance matrix brings additional information about the sources on top of the power spectrum. We show that there is a significant improvement in the Figure of Merit by using this additional information in comparison to only power spectrum estimation for the LIGO-Virgo-KAGRA (LVK) network of detectors with the design sensitivity noise with two years of observation. The inclusion of the off-diagonal correlation in the covariance of the SGWB in the data analysis pipelines will be beneficial in the quest for the SGWB signal in LVK frequency bands as well as in lower frequencies and in getting an insight into its origin.
△ Less
Submitted 31 October, 2023; v1 submitted 12 July, 2023;
originally announced July 2023.
-
Development of On-Ground Hardware In Loop Simulation Facility for Space Robotics
Authors:
Roshan Sah,
Raunak Srivastava,
Kaushik Das
Abstract:
Over a couple of decades, space junk has increased rapidly, which has caused significant threats to the LEO operation satellites. An Active Debris Removal $(ADR)$ concept continuously evolves for space junk removal. One of the ADR methods is Space Robotics, whose function is to chase, capture and de-orbit the space junk. This paper presents the development of an on-ground space robotics facility i…
▽ More
Over a couple of decades, space junk has increased rapidly, which has caused significant threats to the LEO operation satellites. An Active Debris Removal $(ADR)$ concept continuously evolves for space junk removal. One of the ADR methods is Space Robotics, whose function is to chase, capture and de-orbit the space junk. This paper presents the development of an on-ground space robotics facility in the TCS Research for on-orbit servicing $(OOS)$ like refueling and debris capture experiments. A Hardware in Loop Simulation (HILS) system will be used for integrated system development, testing, and demonstration of on-orbit docking mechanisms. The HiLS test facility of TCS Research Lab will use two URs in which one UR is attached to the RG2 gripper, and the other is attached to a force-torque sensor and with a scaled mock-up model. The first UR5 will be mounted on a 7-axis linear rail and contain the docking probe. First, UR5 with a suitable gripper has to interface its control boxes. The gras** algorithm was run through the ROS interface line to demonstrate and validate the on-orbit operations. The manipulator will be mounted with LIDAR and a camera to visualize the mock-up model, find the target model's pose and rotational velocity estimation, and a gripper that will move relative to the target model. The other manipulator has the UR10 control, providing rotational and random motion to the mockup, enabling a dynamic simulator fed by force-torque data. The dynamic simulator is fed up with the orbit propagator, which will provide the orbiting environment to the target model. For the simulation of the docking and gras** of the target model, a linear rail of a 6m setup is still in the procurement process. Once reaching proximity, the gras** algorithm will be launched to capture the target model after reading the random motion of the mock-up model.
△ Less
Submitted 3 June, 2023;
originally announced June 2023.
-
Direct experimental evidence of tunable charge transfer at the $LaNiO_{3}/CaMnO_{3}$ ferromagnetic interface
Authors:
J. R. Paudel,
M. Terilli,
T. -C. Wu,
J. D. Grassi,
A. M. Derrico,
R. K. Sah,
M. Kareev,
C. Klewe,
P. Shafer,
A. Gloskovskii,
C. Schlueter,
V. N. Strocov,
J. Chakhalian,
A. X. Gray
Abstract:
Interfacial charge transfer in oxide heterostructures gives rise to a rich variety of electronic and magnetic phenomena. Designing heterostructures where one of the thin-film components exhibits a metal-insulator transition opens a promising avenue for controlling such phenomena both statically and dynamically. In this letter, we utilize a combination of depth-resolved soft X-ray standing-wave and…
▽ More
Interfacial charge transfer in oxide heterostructures gives rise to a rich variety of electronic and magnetic phenomena. Designing heterostructures where one of the thin-film components exhibits a metal-insulator transition opens a promising avenue for controlling such phenomena both statically and dynamically. In this letter, we utilize a combination of depth-resolved soft X-ray standing-wave and hard X-ray photoelectron spectroscopies in conjunction with polarization-dependent X-ray absorption spectroscopy to investigate the effects of the metal-insulator transition in $LaNiO_{3}$ on the electronic and magnetic states at the $LaNiO_{3}/CaMnO_{3}$ interface. We report on a direct observation of the reduced effective valence state of the interfacial Mn cations in the metallic superlattice with an above-critical $LaNiO_{3}$ thickness (6 u.c.) due to the leakage of itinerant Ni 3d $e_{g}$ electrons into the interfacial $CaMnO_{3}$ layer. Conversely, in an insulating superlattice with a below-critical $LaNiO_{3}$ thickness of 2 u.c., a homogeneous effective valence state of Mn is observed throughout the $CaMnO_{3}$ layers due to the blockage of charge transfer across the interface. The ability to switch and tune interfacial charge transfer enables precise control of the emergent ferromagnetic state at the $LaNiO_{3}/CaMnO_{3}$ interface and, thus, has far-reaching consequences on the future strategies for the design of next-generation spintronic devices.
△ Less
Submitted 13 April, 2023;
originally announced April 2023.
-
Ultra-thin Epitaxial MgB2 on SiC: Substrate Surface Polarity Dependent Properties
Authors:
Weibing Yang,
Leila Kasaei,
Hussein Hijazi,
Sylvie Rangan,
Yao-wen Yeh,
Raj K. Sah,
Jay R. Paudel,
Ke Chen,
Alexander X. Gray,
Philip Batson,
Leonard C. Feldman,
Xiaoxing Xi
Abstract:
High quality, ultrathin, superconducting films are required for advanced devices such as hot-electron bolometers, superconducting nanowire single photon detectors, and quantum applications. Using Hybrid Physical-Chemical Vapor Deposition (HPCVD), we show that MgB2 films as thin as 4 nm can be fabricated on the carbon terminated 6H-SiC (0001) surface with a superconducting transition temperature ab…
▽ More
High quality, ultrathin, superconducting films are required for advanced devices such as hot-electron bolometers, superconducting nanowire single photon detectors, and quantum applications. Using Hybrid Physical-Chemical Vapor Deposition (HPCVD), we show that MgB2 films as thin as 4 nm can be fabricated on the carbon terminated 6H-SiC (0001) surface with a superconducting transition temperature above 33K and a rms roughness of 0.7 nm. Remarkably, the film quality is a function of the SiC surface termination, with the C-terminated surface preferred to the Si-terminated surface. To understand the MgB2 thin film/ SiC substrate interactions giving rise to this difference, we characterized the interfacial structures using Rutherford backscattering spectroscopy/channeling, electron energy loss spectroscopy, and x-ray photoemission spectroscopy. The MgB2/SiC interface structure is complex and different for the two terminations. Both terminations incorporate substantial unintentional oxide layers influencing MgB2 growth and morphology, but with different extent, intermixing and interface chemistry. In this paper, we report measurements of transport, resistivity, and critical superconducting temperature of MgB2/SiC that are different for the two terminations, and link interfacial structure variations to observed differences. The result shows that the C face of SiC is a preferred substrate for the deposition of ultrathin superconducting MgB2 films.
△ Less
Submitted 4 January, 2023;
originally announced January 2023.
-
Design of Chemical Propellant Thruster to Deorbit Nano satellite: StudSat II
Authors:
Prabin Sherpaili,
Roshan Sah,
Sandesh Hegde,
Bir Bahadur Chaudhary
Abstract:
An increase in satellite application has skyrocketed the number of satellites, especially in the low earth orbit (LEO). The major concern today is that these satellites become debris after the end of life, negatively affecting the space environment. As per the International Guidelines of the European Space Agency, it is mandatory to deorbit the satellite within 25 years of its end of life. This pa…
▽ More
An increase in satellite application has skyrocketed the number of satellites, especially in the low earth orbit (LEO). The major concern today is that these satellites become debris after the end of life, negatively affecting the space environment. As per the International Guidelines of the European Space Agency, it is mandatory to deorbit the satellite within 25 years of its end of life. This paper is aimed to design the solid chemical propellant thruster to deorbit the StudSat II from its original orbit to the lower orbit. StudSat II carries the heritage of StudSat I, successfully launched on 12th July 2010 AD, and is the first Pico Satellite in India by the undergraduate students of seven engineering colleges. This paper explains how a solid monopropellant thruster could be used to deorbit the satellite after the end of life with the least difficulty compared to other active and passive methods of deorbiting. The deorbiting mechanism consists of a solid propellant, Convergent Divergent nozzle, ignition system, and electronic actuators. The components of the thruster were designed in the CATIA V5, and the combustion studies and flow analysis were done in ANSYS. The concept of Hohmann transfer was used to deorbit the satellite, and STK was used to simulate it.
△ Less
Submitted 26 December, 2022; v1 submitted 22 December, 2022;
originally announced December 2022.
-
Deposition of Reduced Graphene Oxide Thin Film by Spray Pyrolysis Method for Perovskite Solar Cell
Authors:
Manoj Pandey,
Dipendra Hamal,
Deepak Subedi,
Bijaya Basnet,
Rajaram Sah,
Santosh K. Tiwari,
Bhim Kafle
Abstract:
The Perovskite absorber layer, the electron transport layer (ETL), the hole transport layer (HTL), and the transparent conducting oxide layer (TCO) are the major components that make up a Perovskite solar cell. Between ETL and HTL, the absorber layer is sandwiched, on which electron-hole pairs are created after absorption of solar radiation. Despite substantial progress toward efficiency, long-ter…
▽ More
The Perovskite absorber layer, the electron transport layer (ETL), the hole transport layer (HTL), and the transparent conducting oxide layer (TCO) are the major components that make up a Perovskite solar cell. Between ETL and HTL, the absorber layer is sandwiched, on which electron-hole pairs are created after absorption of solar radiation. Despite substantial progress toward efficiency, long-term stability still remains a serious concern. Present work focuses toward contributing on the later issue by adopting Titanium dioxide (TiO2) as ETL and reduced graphene oxide (rGO) as HTL. Specifically, in the present work, we report our efforts on the preparation of compact titanium dioxide (C-TiO2) and mesoporous titanium dioxide (M-TiO2) layers as an ETL and a reduced graphene oxide thin film as a HTL. The C-TiO2 film was spin casted on FTO glass followed by casting of M-TiO2 film using Doctor Blading technique. Similarly, the rGO film was produced by spray casting over the glass substrate. The as-prepared ETL and HTL layers were characterized by measuring their optical properties (transmittance and reflectance of thin films). Then, the bandgap, Eg was extracted from reflectance and transmittance curves for ETL and HTL respectively. In the case of rGO, we found the value of Eg to be 2.1 eV, which varies between 2.7eV and 0.02eV depending upon its reduction level based on the previously reported values. Similarly, the bandgap of the C-TiO2 was 4.51 eV which was reduced to 4.12 eV after the addition of M-TiO2, which are 0.9 to 1.1 eV higher than previously reported values. However, bandgap shows decreasing trend after employing M- TiO2 over C-TiO2. In a Perovskite solar cell, both ETL and HTL will be investigated.
△ Less
Submitted 2 December, 2022;
originally announced December 2022.
-
Design and Analysis of Cold Gas Thruster to De-Orbit the PSLV Debris
Authors:
Roshan Sah,
Raunak Srivastava,
Kaushik Das
Abstract:
Todayś world of spaceś primary concern is the uncontrolled growth of space debris and its probability of collision with spacecraft, particularly in the low earth orbit (LEO) regions. This paper is aimed to design an optimized micro-propulsion system, Cold Gas Thruster, to de-orbit the PSLV debris from 668km to 250 km height after capturing process. The propulsion system mainly consists of a storag…
▽ More
Todayś world of spaceś primary concern is the uncontrolled growth of space debris and its probability of collision with spacecraft, particularly in the low earth orbit (LEO) regions. This paper is aimed to design an optimized micro-propulsion system, Cold Gas Thruster, to de-orbit the PSLV debris from 668km to 250 km height after capturing process. The propulsion system mainly consists of a storage tank, pipes, control valves, and a convergent-divergent nozzle. The paper gives an idea of the design of each component based on a continuous iterative process until the design thrust requirements are met. All the components are designed in the CATIA V5, and the structural analysis is done in the ANSYS tool for each component where our cylinder tank can withstand the high hoop stress generated on its wall of it. And flow analysis is done by using the K-$ε$ turbulence model for the CD nozzle, which provides the required thrust to de-orbit PSLV from a higher orbit to a lower orbit, after which the air drag will be enough to bring back to earthś atmosphere and burn it. Hohmannś orbit transfer method has been used to de-orbit the PSLV space debris, and it has been simulated by STK tools. And the result shows that our optimized designed thruster generates enough thrust to de-orbit the PSLV debris to a very low orbit.
△ Less
Submitted 7 August, 2022;
originally announced August 2022.
-
Understanding density driven errors for reaction barrier heights
Authors:
Aaron D. Kaplan,
Chandra Shahi,
Pradeep Bhetwal,
Raj K. Sah,
John P. Perdew
Abstract:
Delocalization errors, such as charge-transfer and some self-interaction errors, plague computationally-efficient and otherwise-accurate density functional approximations (DFAs). Evaluating a semi-local DFA non-self-consistently on the Hartree-Fock (HF) density is often recommended as a computationally cheap remedy for delocalization errors. For sophisticated meta-GGAs like SCAN, this approach can…
▽ More
Delocalization errors, such as charge-transfer and some self-interaction errors, plague computationally-efficient and otherwise-accurate density functional approximations (DFAs). Evaluating a semi-local DFA non-self-consistently on the Hartree-Fock (HF) density is often recommended as a computationally cheap remedy for delocalization errors. For sophisticated meta-GGAs like SCAN, this approach can achieve remarkable accuracy. When this HF-DFT (or DFA@HF) significantly improves over the DFA, it is often presumed that the HF density is more accurate than the self-consistent DFA density. By applying the metrics of density-corrected density functional theory (DFT), we show that HF-DFT works for barrier heights by making a localizing charge transfer error or density over-correction, thereby producing a somewhat-reliable cancellation of density- and functional-driven errors for the energy. A quantitative analysis of the charge transfer errors in a few transition states confirms this trend. We do not have the exact functional and exact densities that are needed to evaluate the exact density- and functional-driven errors for the large BH76 database of barrier heights. Instead, we have identified and used three non-local proxy functionals (the SCAN 50% global hybrid, the range-separated hybrid LC-$ω$PBE, and SCAN-FLOSIC) and their self-consistent densities. These functionals yield reasonably accurate self-consistent barrier heights, and their self-consistent total energies are nearly piecewise linear in fractional electron number - two important points of similarity to the exact functional. We argue that density-driven errors of the energy in a self-consistent density functional calculation are second-order in the density error, and that large density-driven errors arise primarily from incorrect electron transfers over length scales larger than the diameter of an atom.
△ Less
Submitted 15 December, 2022; v1 submitted 27 July, 2022;
originally announced July 2022.
-
Energy Efficient Routing For Underwater Acoustic Sensor Network Using Genetic Algorithm
Authors:
Arjun Prasad Chaurasiya,
Roshan Sah,
Dr. V. Sivakumar
Abstract:
In underwater acoustic sensor networks (UWASN), energy-reliable data transmission is a challenging task. This is due to acoustic transmission disturbances caused by excessive noise, exceptionally long propagation delays, a high bit error rate, limited bandwidth capability, and interference. One of the most important issues of UWASN for research is how to extend the life span of data transmission.…
▽ More
In underwater acoustic sensor networks (UWASN), energy-reliable data transmission is a challenging task. This is due to acoustic transmission disturbances caused by excessive noise, exceptionally long propagation delays, a high bit error rate, limited bandwidth capability, and interference. One of the most important issues of UWASN for research is how to extend the life span of data transmission. Data transfer from a source node to a destination node in UWASN is a complicated topic for researchers. Many routing algorithms, such as vector base forwarding and depth base routing, have been developed in past years. We propose a genetic algorithm-based optimization method for improving the energy efficiency of data transmission in the routing path from a source node to a destination node.
△ Less
Submitted 25 April, 2022;
originally announced July 2022.
-
ADARP: A Multi Modal Dataset for Stress and Alcohol Relapse Quantification in Real Life Setting
Authors:
Ramesh Kumar Sah,
Michael McDonell,
Patricia Pendry,
Sara Parent,
Hassan Ghasemzadeh,
Michael J Cleveland
Abstract:
Stress detection and classification from wearable sensor data is an emerging area of research with significant implications for individuals' physical and mental health. In this work, we introduce a new dataset, ADARP, which contains physiological data and self-report outcomes collected in real-world ambulatory settings involving individuals diagnosed with alcohol use disorders. We describe the use…
▽ More
Stress detection and classification from wearable sensor data is an emerging area of research with significant implications for individuals' physical and mental health. In this work, we introduce a new dataset, ADARP, which contains physiological data and self-report outcomes collected in real-world ambulatory settings involving individuals diagnosed with alcohol use disorders. We describe the user study, present details of the dataset, establish the significant correlation between physiological data and self-reported outcomes, demonstrate stress classification, and make our dataset public to facilitate research.
△ Less
Submitted 14 June, 2022;
originally announced June 2022.
-
Design of Low Thrust Controlled Maneuvers to Chase and De-orbit the Space Debris
Authors:
Roshan Sah,
Raunak Srivastava,
Kaushik Das
Abstract:
Over the several decades, the space debris at LEO has grown rapidly which had caused a serious threat to the operating satellite in an orbit. To avoid the risk of collision and protect the LEO environment, the space robotics ADR concept has been continuously developed for over a decade to chase, capture, and deorbit space debris. This paper presents the designed small satellite with dual robotic m…
▽ More
Over the several decades, the space debris at LEO has grown rapidly which had caused a serious threat to the operating satellite in an orbit. To avoid the risk of collision and protect the LEO environment, the space robotics ADR concept has been continuously developed for over a decade to chase, capture, and deorbit space debris. This paper presents the designed small satellite with dual robotic manipulators. The small satellite is designed based on CubeSat standards, which uses commercially available products in the market. In this paper, an approach is detailed for designing the controlled chase and deorbit maneuver for a small satellite equipped with an RCS thruster. The maneuvers are comprised of two phases, a. bringing the chaser satellite to the debris orbit and accelerating it to close proximity of 1m to the debris object by using the low thrust RCS thruster, and b. Once captured, controlled deorbiting it to 250 km of altitude. A Hohmann transfer concept is used to move our chaser satellite from the lower orbit to the debris orbit by two impulsive burns. A number of the scenarios are simulated, where one or more orbital elements are adjusted. For more than one orbital elements adjustment, the DAG law and the Q law are utilized. These laws synthesize the three direction thrusts to the single thrust force for the controlled maneuver. The $Δ$V requirement at each maneuver is determined by using the performance parameters of the RCS thruster intended for a small satellite. The results show that, for long term simulation of a chaser satellite maneuver to debris object, an optimum DAG law is most suitable than the Q law, as it can handle the singularity behavior of the orbital elements caused due by adjustment of one or more elements more efficiently.
△ Less
Submitted 1 April, 2022;
originally announced April 2022.
-
Numerical Investigation of Supersonic Turbulent Flow Over Open Cavities
Authors:
Roshan Sah,
Sanchari Ghosh
Abstract:
The study of cavity flow is one of the most important research topics of unsteady aerodynamics. Supersonic turbulent flows over a cavity are mostly encountered in missiles, turbomachinery, and high-speed aircraft. The turbulence inside the cavity gives rise to excess drag, acoustic waves, pressure fluctuations, and vibrations which may lead to numerous problems like excess fuel consumption, failur…
▽ More
The study of cavity flow is one of the most important research topics of unsteady aerodynamics. Supersonic turbulent flows over a cavity are mostly encountered in missiles, turbomachinery, and high-speed aircraft. The turbulence inside the cavity gives rise to excess drag, acoustic waves, pressure fluctuations, and vibrations which may lead to numerous problems like excess fuel consumption, failure of missile trajectory or mechanical parts, and aerodynamic heating. We conduct numerical simulations to investigate the flow and compare our results to existing experimental data to show quantitative validation. We then investigate the effect of the Mach number of the turbulent supersonic flow on the pressure contours and the vortical structures inside the cavity and the subsequent effect on other flow parameters like acoustic waves. Thereafter, we propose two modifications of the cavity geometry, a) slanted edges and b) smoothened corners with slanted edges, to improve the aerodynamic performance. ANSYS ICEM tool has been used for the fine mesh generation of our cavity geometry and all the simulation was run on ANSYS fluent software. The K omega SST turbulence model was used for the simulation as it can capture the near wall property with reasonable accuracy and a grid independence study was carried out to find the correct solution of the Navier Stokes equation was proceeding by the solver. The parameters like pressure contours, streamline pattern, coefficient of pressure distribution and sound pressure level (SPL) has been found and compared for both modified and unmodified open cavity at different Mach number. The modifications suggested show a significant improvement over the open cavity designs in the mean pressure distribution and sound pressure level distributions.
△ Less
Submitted 18 August, 2021;
originally announced August 2021.
-
Design of the Propulsion System of Nano satellite: StudSat2
Authors:
Roshan Sah,
Prabin Sherpaili,
Apurva Anand,
Sandesh Hegde
Abstract:
The increase in the application of the satellite has skyrocketed the number of satellites, especially in the low earth orbit. The major concern today is after the end of life, these satellites become debris which negatively affects the space environment. As per the international guidelines of the European Space Agency, it is mandatory to deorbit the satellite within 25 years of the end of life. St…
▽ More
The increase in the application of the satellite has skyrocketed the number of satellites, especially in the low earth orbit. The major concern today is after the end of life, these satellites become debris which negatively affects the space environment. As per the international guidelines of the European Space Agency, it is mandatory to deorbit the satellite within 25 years of the end of life. StudSat1, which was successfully launched on 12th July 2010, is the first Pico satellite developed in India by undergraduate students from seven different engineering colleges across South India. Now, the team is develo** StudSat2, which is India's first twin satellite mission having two nanosatellites whose overall mass is less than 10kg. This paper is aimed to design the propulsion system, cold gas thruster, to deorbit StudSat2 from its original orbit i.e. 600 km to lower orbit i.e. 400km. The propulsion system mainly consists of a storage tank, pipes, Convergent Divergent nozzle, and electronic actuators. The paper also gives information about the components of cold gas thruster, which have been designed in the CATIA V5, and the structural and flow analysis of the same has been done in ANSYS. The concept of Hohmann transfer has been used to deorbit the satellite and STK has been used to simulate it.
△ Less
Submitted 22 July, 2021;
originally announced July 2021.
-
Attitude and In-orbit Residual Magnetic Moment Estimation of Small Satellites Using only Magnetometer
Authors:
Raunak Srivastava,
Roshan Sah,
Kaushik Das
Abstract:
Attitude estimation or determination is a fundamental task for satellites to remain effectively operational. This task is furthermore complicated on small satellites by the limited space and computational power available on-board. This, coupled with a usually low budget, restricts small satellites from using high precision sensors for its especially important task of attitude estimation. On top of…
▽ More
Attitude estimation or determination is a fundamental task for satellites to remain effectively operational. This task is furthermore complicated on small satellites by the limited space and computational power available on-board. This, coupled with a usually low budget, restricts small satellites from using high precision sensors for its especially important task of attitude estimation. On top of this, small satellites, on account of their size and weight, are comparatively more sensitive to environmental or orbital disturbances as compared to their larger counterparts. Magnetic disturbance forms the major contributor to orbital disturbances on small satellites in Lower Earth Orbits (LEO). This magnetic disturbance depends on the Residual Magnetic Moment (RMM) of the satellite itself, which for higher accuracy should be determined in real-time. This paper presents a method for in-orbit estimation of the satellite magnetic dipole using a Random Walk Model in order to circumnavigate the inaccuracy arising due to unknown orbital magnetic disturbances. It is also ensured that the dipole as well as attitude estimation of the satellite is done using only a magnetometer as the sensor.
△ Less
Submitted 20 July, 2021;
originally announced July 2021.
-
Constellation Design of Remote Sensing Small Satellite for Infrastructure Monitoring in India
Authors:
Roshan Sah,
Raunak Srivastava,
Kaushik Das
Abstract:
A constellation of remote sensing small satellite system has been developed for infrastructure monitoring in India by using SAR Payload. The LEO constellation of the small satellites is designed in a way, which can cover the entire footprint of India. Since India lies a little above the equatorial region, the orbital parameters are adjusted in a way that inclination of 36 degrees and RAAN varies f…
▽ More
A constellation of remote sensing small satellite system has been developed for infrastructure monitoring in India by using SAR Payload. The LEO constellation of the small satellites is designed in a way, which can cover the entire footprint of India. Since India lies a little above the equatorial region, the orbital parameters are adjusted in a way that inclination of 36 degrees and RAAN varies from 70-130 degrees at a height of 600 km has been considered. A total number of 4 orbital planes are designed in which each orbital plane consisting 3 small satellites with 120-degrees true anomaly separation. Each satellite is capable of taking multiple look images with the minimum resolution of 1 meter per pixel and swath width of 10 km approx. The multiple look images captured by the SAR payload help in continuous infrastructure monitoring of our interested footprint area in India. Each small satellite is equipped with a communication payload that uses X-band and VHF antenna, whereas the TT&C will use a high data-rate S-band transmitter. The paper presents only a coverage metrics analysis method of our designed constellation for our India footprint by considering the important metrics like revisit time, response time, and coverage efficiency. The result shows that the average revisits time for our constellation ranges from about 15- 35 min which is less than an hour and the average response time for this iteratively designed constellation ranges from about 25-120 min along with hundred percent coverage efficiency most of the time. Finally, it was concluded that each satellite has 70kg of total mass and costs around $ 0.75M to develop.
△ Less
Submitted 20 July, 2021;
originally announced July 2021.
-
Stress Classification and Personalization: Getting the most out of the least
Authors:
Ramesh Kumar Sah,
Hassan Ghasemzadeh
Abstract:
Stress detection and monitoring is an active area of research with important implications for the personal, professional, and social health of an individual. Current approaches for affective state classification use traditional machine learning algorithms with features computed from multiple sensor modalities. These methods are data-intensive and rely on hand-crafted features which impede the prac…
▽ More
Stress detection and monitoring is an active area of research with important implications for the personal, professional, and social health of an individual. Current approaches for affective state classification use traditional machine learning algorithms with features computed from multiple sensor modalities. These methods are data-intensive and rely on hand-crafted features which impede the practical applicability of these sensor systems in daily lives. To overcome these shortcomings, we propose a novel Convolutional Neural Network (CNN) based stress detection and classification framework without any feature computation using data from only one sensor modality. Our method is competitive and outperforms current state-of-the-art techniques and achieves a classification accuracy of $92.85\%$ and an $f1$ score of $0.89$. Through our leave-one-subject-out analysis, we also show the importance of personalizing stress models.
△ Less
Submitted 12 July, 2021;
originally announced July 2021.
-
Tuning band alignment at a semiconductor-crystalline oxide heterojunction via electrostatic modulation of the interfacial dipole
Authors:
M. Chrysler,
J. Gabel,
T. -L. Lee,
A. N. Penn,
B. E. Matthews,
D. M. Kepaptsoglou,
Q. M. Ramasse,
J. R. Paudel,
R. K. Sah,
J. D. Grassi,
Z. Zhu,
A. X. Gray,
J. M. LeBeau,
S. R. Spurgeon,
S. A. Chambers,
P. V. Sushko,
J. H. Ngai
Abstract:
We demonstrate that the interfacial dipole associated with bonding across the SrTiO3/Si heterojunction can be tuned through space charge, thereby enabling the band alignment to be altered via do**. Oxygen impurities in Si act as donors that create space charge by transferring electrons across the interface into SrTiO3. The space charge induces an electric field that modifies the interfacial dipo…
▽ More
We demonstrate that the interfacial dipole associated with bonding across the SrTiO3/Si heterojunction can be tuned through space charge, thereby enabling the band alignment to be altered via do**. Oxygen impurities in Si act as donors that create space charge by transferring electrons across the interface into SrTiO3. The space charge induces an electric field that modifies the interfacial dipole, thereby tuning the band alignment from type-II to type-III. The transferred charge, resulting in built-in electric fields, and change in band alignment are manifested in electrical transport and hard x-ray photoelectron spectroscopy measurements. Ab initio models reveal the interplay between polarization and band offsets. We find that band offsets can be tuned by modulating the density of space charge across the interface. Functionalizing the interface dipole to enable electrostatic altering of band alignment opens new pathways to realize novel behavior in semiconducting heterojunctions.
△ Less
Submitted 27 May, 2021;
originally announced May 2021.
-
Strain-induced anion ordering in perovskite oxyfluoride films
Authors:
Jiayi Wang,
Yong** Shin,
Jay R. Paudel,
Joseph D. Grassi,
Raj K. Sah,
Weibing Yang,
Evguenia Karapetrova,
Abdulhadi Zaidan,
Vladimir N. Strocov,
Christoph Klewe,
Padraic Shafer,
Alexander X. Gray,
James M. Rondinelli,
Steven J. May
Abstract:
Anionic ordering is a promising route to engineer physical properties in functional heteroanionic materials. A central challenge in the study of anion-ordered compounds lies in develo** robust synthetic strategies to control anion occupation and in understanding the resultant implications for electronic structure. Here, we show that epitaxial strain induces preferential occupation of F and O on…
▽ More
Anionic ordering is a promising route to engineer physical properties in functional heteroanionic materials. A central challenge in the study of anion-ordered compounds lies in develo** robust synthetic strategies to control anion occupation and in understanding the resultant implications for electronic structure. Here, we show that epitaxial strain induces preferential occupation of F and O on the anion sites in perovskite oxyfluoride SrMnO2.5-dFg films grown on different substrates. Under compressive strain, F tends to take the apical-like sites, which was revealed by F and O K-edge linearly polarized x-ray absorption spectroscopy and density functional theory calculations, resulting in an enhanced c-axis expansion. Under tensile strain, F tends to take the equatorial-like sites, enabling the longer Mn-F bonds to lie within the plane. The anion ordered oxyfluoride films exhibit a significant orbital polarization of the 3d electrons, distinct F-site dependence to their valence band density of states, and an enhanced resistivity when F occupies the apical-like anion site compared to the equatorial-like site. By demonstrating a general strategy for inducing anion-site order in oxyfluoride perovskites, this work lays the foundation for future materials design and synthesis efforts that leverage this greater degree of atomic control to realize new polar or quasi-two-dimensional materials.
△ Less
Submitted 2 December, 2020;
originally announced December 2020.
-
Adversarial Transferability in Wearable Sensor Systems
Authors:
Ramesh Kumar Sah,
Hassan Ghasemzadeh
Abstract:
Machine learning is used for inference and decision making in wearable sensor systems. However, recent studies have found that machine learning algorithms are easily fooled by the addition of adversarial perturbations to their inputs. What is more interesting is that adversarial examples generated for one machine learning system is also effective against other systems. This property of adversarial…
▽ More
Machine learning is used for inference and decision making in wearable sensor systems. However, recent studies have found that machine learning algorithms are easily fooled by the addition of adversarial perturbations to their inputs. What is more interesting is that adversarial examples generated for one machine learning system is also effective against other systems. This property of adversarial examples is called transferability. In this work, we take the first stride in studying adversarial transferability in wearable sensor systems from the following perspectives: 1) transferability between machine learning systems, 2) transferability across subjects, 3) transferability across sensor body locations, and 4) transferability across datasets. We found strong untargeted transferability in most cases. Targeted attacks were less successful with success scores from $0\%$ to $80\%$. The transferability of adversarial examples depends on many factors such as the inclusion of data from all subjects, sensor body position, number of samples in the dataset, type of learning algorithm, and the distribution of source and target system dataset. The transferability of adversarial examples decreases sharply when the data distribution of the source and target system becomes more distinct. We also provide guidelines for the community for designing robust sensor systems.
△ Less
Submitted 15 July, 2021; v1 submitted 17 March, 2020;
originally announced March 2020.
-
Conditioning and Future Plans for a Multi-purpose 805 MHz Pillbox Cavity for Muon Acceleration
Authors:
G. Kazakevich,
G. Flanagan,
R. P. Johnson,
M. Neubauer,
R. Sah,
A. Dudas,
F. Mahrhauser,
A. Moretti,
M. Popovic,
K. Yonehara,
G. Romanov,
Y. Torun,
S. Kurennoy
Abstract:
An 805 MHz RF pillbox cavity has been designed and constructed to investigate potential muon beam acceleration and cooling techniques for a Muon Collider or Neutrino Factory. The cavity can operate in vacuum or under pressure to 100 atmospheres, at room temperature or in a liquid nitrogen bath at 77 K. The cavity has been designed for easy assembly and disassembly with bolted construction using al…
▽ More
An 805 MHz RF pillbox cavity has been designed and constructed to investigate potential muon beam acceleration and cooling techniques for a Muon Collider or Neutrino Factory. The cavity can operate in vacuum or under pressure to 100 atmospheres, at room temperature or in a liquid nitrogen bath at 77 K. The cavity has been designed for easy assembly and disassembly with bolted construction using aluminum seals. To perform vacuum and high pressure breakdown studies of materials and geometries most suitable for the collider or factory, the surfaces of the end walls of the cavity can be replaced with different materials such as copper, aluminum, beryllium, or molybdenum, and with different geometries such as shaped windows or grid structures. The cavity has been designed to fit inside the 5-Tesla solenoid in the MuCool Test Area at Fermilab. In this paper we present the vacuum conditioning results and discuss plans for testing in a 5-Tesla magnetic field. Additionally, we discuss the testing plan for beryllium (a material research has shown to be ideal for the collider or factory) end walls.
△ Less
Submitted 30 January, 2013;
originally announced January 2013.
