Applying Machine Learning Models on Metrology Data for Predicting Device Electrical Performance
Authors:
Bappaditya Dey,
Anh Tuan Ngo,
Sara Sacchi,
Victor Blanco,
Philippe Leray,
Sandip Halder
Abstract:
Moore Law states that transistor density will double every two years, which is sustained until today due to continuous multi-directional innovations, such as extreme ultraviolet lithography, novel patterning techniques etc., leading the semiconductor industry towards 3nm node and beyond. For any patterning scheme, the most important metric to evaluate the quality of printed patterns is EPE, with o…
▽ More
Moore Law states that transistor density will double every two years, which is sustained until today due to continuous multi-directional innovations, such as extreme ultraviolet lithography, novel patterning techniques etc., leading the semiconductor industry towards 3nm node and beyond. For any patterning scheme, the most important metric to evaluate the quality of printed patterns is EPE, with overlay being its largest contribution. Overlay errors can lead to fatal failures of IC devices such as short circuits or broken connections in terms of P2P electrical contacts. Therefore, it is essential to develop effective overlay analysis and control techniques to ensure good functionality of fabricated semiconductor devices. In this work we have used an imec N14 BEOL process flow using LELE patterning technique to print metal layers with minimum pitch of 48nm with 193i lithography. FF structures are decomposed into two mask layers (M1A and M1B) and then the LELE flow is carried out to make the final patterns. Since a single M1 layer is decomposed into two masks, control of overlay between the two masks is critical. The goal of this work is of two-fold as, (a) to quantify the impact of overlay on capacitance and (b) to see if we can predict the final capacitance measurements with selected machine learning models at an early stage. To do so, scatterometry spectra are collected on these electrical test structures at (a)post litho, (b)post TiN hardmask etch, and (c)post Cu plating and CMP. Critical Dimension and overlay measurements for line-space pattern are done with SEM post litho, post etch and post Cu CMP. Various machine learning models are applied to do the capacitance prediction with multiple metrology inputs at different steps of wafer processing. Finally, we demonstrate that by using appropriate machine learning models we are able to do better prediction of electrical results.
△ Less
Submitted 20 November, 2023;
originally announced December 2023.
Deep learning denoiser assisted roughness measurements extraction from thin resists with low Signal-to-Noise Ratio(SNR) SEM images: analysis with SMILE
Authors:
Sara Sacchi,
Bappaditya Dey,
Iacopo Mochi,
Sandip Halder,
Philippe Leray
Abstract:
The technological advance of High Numerical Aperture Extreme Ultraviolet Lithography (High NA EUVL) has opened the gates to extensive researches on thinner photoresists (below 30nm), necessary for the industrial implementation of High NA EUVL. Consequently, images from Scanning Electron Microscopy (SEM) suffer from reduced imaging contrast and low Signal-to-Noise Ratio (SNR), impacting the measure…
▽ More
The technological advance of High Numerical Aperture Extreme Ultraviolet Lithography (High NA EUVL) has opened the gates to extensive researches on thinner photoresists (below 30nm), necessary for the industrial implementation of High NA EUVL. Consequently, images from Scanning Electron Microscopy (SEM) suffer from reduced imaging contrast and low Signal-to-Noise Ratio (SNR), impacting the measurement of unbiased Line Edge Roughness (uLER) and Line Width Roughness (uLWR). Thus, the aim of this work is to enhance the SNR of SEM images by using a Deep Learning denoiser and enable robust roughness extraction of the thin resist. For this study, we acquired SEM images of Line-Space (L/S) patterns with a Chemically Amplified Resist (CAR) with different thicknesses (15nm, 20nm, 25nm, 30nm), underlayers (Spin-On-Glass-SOG, Organic Underlayer-OUL) and frames of averaging (4, 8, 16, 32, and 64 Fr). After denoising, a systematic analysis has been carried out on both noisy and denoised images using an open-source metrology software, SMILE 2.3.2, for investigating mean CD, SNR improvement factor, biased and unbiased LWR/LER Power Spectral Density (PSD). Denoised images with lower number of frames present unaltered Critical Dimensions (CDs), enhanced SNR (especially for low number of integration frames), and accurate measurements of uLER and uLWR, with the same accuracy as for noisy images with a consistent higher number of frames. Therefore, images with a small number of integration frames and with SNR < 2 can be successfully denoised, and advantageously used in improving metrology throughput while maintaining reliable roughness measurements for the thin resist.
△ Less
Submitted 23 October, 2023;
originally announced October 2023.
