-
Vibrational mean free paths and thermal conductivity of amorphous silicon from non-equilibrium molecular dynamics simulations
Authors:
K. Sääskilahti,
J. Oksanen,
J. Tulkki,
A. J. H. McGaughey,
S. Volz
Abstract:
The frequency-dependent mean free paths (MFPs) of vibrational heat carriers in amorphous silicon are predicted from the length dependence of the spectrally decomposed heat current (SDHC) obtained from non-equilibrium molecular dynamics simulations. The results suggest a (frequency)$^{-2}$ scaling of the room-temperature MFPs below 5 THz. The MFPs exhibit a local maximum at a frequency of 8 THz and…
▽ More
The frequency-dependent mean free paths (MFPs) of vibrational heat carriers in amorphous silicon are predicted from the length dependence of the spectrally decomposed heat current (SDHC) obtained from non-equilibrium molecular dynamics simulations. The results suggest a (frequency)$^{-2}$ scaling of the room-temperature MFPs below 5 THz. The MFPs exhibit a local maximum at a frequency of 8 THz and fall below 1 nm at frequencies greater than 10 THz, indicating localized vibrations. The MFPs extracted from sub-10 nm system-size simulations are used to predict the length-dependence of thermal conductivity up to system sizes of 100 nm and good agreement is found with separate molecular dynamics simulations. Weighting the SDHC by the frequency-dependent quantum occupation function provides a simple and convenient method to account for quantum statistics and provides reasonable agreement with the experimentally-measured trend and magnitude.
△ Less
Submitted 28 May, 2016;
originally announced May 2016.
-
Spectral map** of heat transfer mechanisms at liquid-solid interfaces
Authors:
K. Sääskilahti,
J. Oksanen,
J. Tulkki,
S. Volz
Abstract:
Thermal transport through liquid-solid interfaces plays an important role in many chemical and biological processes, and better understanding of liquid-solid energy transfer is expected to enable improving the efficiency of thermally driven applications. We determine the spectral distribution of thermal current at liquid-solid interfaces from nonequilibrium molecular dynamics, delivering a detaile…
▽ More
Thermal transport through liquid-solid interfaces plays an important role in many chemical and biological processes, and better understanding of liquid-solid energy transfer is expected to enable improving the efficiency of thermally driven applications. We determine the spectral distribution of thermal current at liquid-solid interfaces from nonequilibrium molecular dynamics, delivering a detailed picture of the contributions of different vibrational modes to liquid-solid energy transfer. Our results show that surface modes located at the Brillouin zone edge and polarized along the liquid-solid surface normal play a crucial role in liquid-solid energy transfer. Strong liquid-solid adhesion allows also for the coupling of in-plane polarized modes in the solid with the liquid, enhancing the heat transfer rate and enabling efficient energy transfer up to the cut-off frequency of the solid. Our results provide fundamental understanding of the energy transfer mechanisms in liquid-solid systems and enable detailed investigations of energy transfer between, e.g., water and organic molecules.
△ Less
Submitted 28 May, 2016; v1 submitted 18 December, 2015;
originally announced December 2015.
-
Nonequilibrium phonon mean free paths in anharmonic chains
Authors:
K. Sääskilahti,
J. Oksanen,
S. Volz,
J. Tulkki
Abstract:
Harnessing the power of low-dimensional materials in thermal applications calls for a solid understanding of the anomalous thermal properties of such systems. We analyze thermal conduction in one-dimensional systems by determining the frequency-dependent phonon mean free paths (MFPs) for an anharmonic chain, delivering insight into the diverging thermal conductivity observed in computer simulation…
▽ More
Harnessing the power of low-dimensional materials in thermal applications calls for a solid understanding of the anomalous thermal properties of such systems. We analyze thermal conduction in one-dimensional systems by determining the frequency-dependent phonon mean free paths (MFPs) for an anharmonic chain, delivering insight into the diverging thermal conductivity observed in computer simulations. In our approach, the MFPs are extracted from the length-dependence of the spectral heat current obtained from nonequilibrium molecular dynamics simulations. At low frequencies, the results reveal a power-law dependence of the MFPs on frequency, in agreement with the diverging conductivity and the recently determined equilibrium MFPs. At higher frequencies, however, the nonequilibrium MFPs consistently exceed the equilibrium MFPs, highlighting the differences between the two quantities. Exerting pressure on the chain is shown to suppress the mean free paths and to generate a weaker divergence of MFPs at low frequencies. The results deliver important insight into anomalous thermal conduction in low-dimensional systems and also reveal differences between the MFPs obtained from equilibrium and nonequilibrium simulations.
△ Less
Submitted 18 December, 2015; v1 submitted 1 October, 2015;
originally announced October 2015.
-
Functionalization mediates heat transport in graphene nanoflakes
Authors:
Haoxue Han,
Yong Zhang,
Zainelabideen Y. Mijbil,
Hatef Sadeghi,
Yuxiang Ni,
Shiyun Xiong,
Kimmo Saaskilahti,
Steven Bailey,
Yuriy A. Kosevich,
Johan Liu,
Colin J. Lambert,
Sebastian Volz
Abstract:
Self-heating is a severe problem for high-power microelectronic devices. Graphene and few-layer graphene have attracted tremendous attention for heat removal thanks to their extraordinarily high in-plane thermal conductivity. However, this high thermal conductivity undergoes severe degradations caused by the contact with the substrate and the functionalization-induced point defects. Here we show t…
▽ More
Self-heating is a severe problem for high-power microelectronic devices. Graphene and few-layer graphene have attracted tremendous attention for heat removal thanks to their extraordinarily high in-plane thermal conductivity. However, this high thermal conductivity undergoes severe degradations caused by the contact with the substrate and the functionalization-induced point defects. Here we show that thermal management of a micro heater can be substantially improved via introduction of alternative heat-esca** channels implemented with graphene-based film covalently bonded to functionalized graphene oxide through silane molecules. Theoretical and experimental results demonstrate a counter-intuitive enhancement of the thermal conductivity of such a graphene-based film. This increase in the in-plane thermal conductivity of supported graphene is accompanied by an improvement on the graphene-substrates thermal contact. Using infrared thermal imaging, we demonstrate that the temperature of the hotspots can be lowered by 12 $^o$C in transistors operating at 130 W mm$^{-2}$ , which corresponds to half of an order-of-magnitude increase in the device lifetime. Ab initio and molecular dynamics simulations reveal that the functionalization constrains the cross-plane scattering of low frequency phonons, which in turn enhances in-plane heat conduction of the bonded graphene film by recovering the long flexural phonon lifetime.
△ Less
Submitted 7 August, 2015;
originally announced August 2015.
-
Frequency-dependent phonon mean free path in carbon nanotubes from non-equilibrium molecular dynamics
Authors:
K. Sääskilahti,
J. Oksanen,
S. Volz,
J. Tulkki
Abstract:
Owing to their long phonon mean free paths (MFPs) and high thermal conductivity, carbon nanotubes (CNTs) are ideal candidates for, e.g., removing heat from electronic devices. It is unknown, however, how the intrinsic phonon MFPs depend on vibrational frequency in non-equilibrium. We determine the spectrally resolved phonon MFPs in isotopically pure CNTs from the spectral phonon transmission funct…
▽ More
Owing to their long phonon mean free paths (MFPs) and high thermal conductivity, carbon nanotubes (CNTs) are ideal candidates for, e.g., removing heat from electronic devices. It is unknown, however, how the intrinsic phonon MFPs depend on vibrational frequency in non-equilibrium. We determine the spectrally resolved phonon MFPs in isotopically pure CNTs from the spectral phonon transmission function calculated using non-equilibrium molecular dynamics, fully accounting for the resistive phonon-phonon scattering processes through the anharmonic terms of the interatomic potential energy function. Our results show that the effective room temperature MFPs of low-frequency phonons ($f<0.5$ THz) exceed $10$ $μ$m, while the MFP of high-frequency phonons ($f\gtrsim 20$ THz) is in the range 10--100 nm. Because the determined MFPs directly reflect the resistance to energy flow, they can be used to accurately predict the thermal conductivity for arbitrary tube lengths by calculating a single frequency integral. The presented results and methods are expected to significantly improve the understanding of non-equilibrium thermal transport in low-dimensional nanostructures.
△ Less
Submitted 20 March, 2015; v1 submitted 11 November, 2014;
originally announced November 2014.
-
Role of anharmonic phonon scattering in the spectrally decomposed thermal conductance at planar interfaces
Authors:
K. Sääskilahti,
J. Oksanen,
J. Tulkki,
S. Volz
Abstract:
Detailed understanding of vibrational heat transfer mechanisms between solids is essential for the efficient thermal engineering and control of nanomaterials. We investigate the frequency dependence of anharmonic scattering and interfacial thermal conduction between two acoustically mismatched solids in planar contact by calculating the spectral decomposition of the heat current flowing through an…
▽ More
Detailed understanding of vibrational heat transfer mechanisms between solids is essential for the efficient thermal engineering and control of nanomaterials. We investigate the frequency dependence of anharmonic scattering and interfacial thermal conduction between two acoustically mismatched solids in planar contact by calculating the spectral decomposition of the heat current flowing through an interface between two materials. The calculations are based on analyzing the correlations of atomic vibrations using the data extracted from non-equilibrium molecular dynamics simulations. Inelastic effects arising from anharmonic interactions are shown to significantly facilitate heat transfer between two mass-mismatched face-centered cubic lattices even at frequencies exceeding the cut-off frequency of the heavier material due to (i) enhanced dissipation of evanescent vibrational modes and (ii) frequency-doubling and frequency-halving three-phonon energy transfer processes at the interface. The results provide substantial insight into interfacial energy transfer mechanisms especially at high temperatures, where inelastic effects become important and other computational methods are ineffective.
△ Less
Submitted 30 October, 2014; v1 submitted 15 May, 2014;
originally announced May 2014.
-
Quantum Langevin equation approach to electromagnetic energy transfer between dielectric bodies in an inhomogeneous environment
Authors:
K. Sääskilahti,
J. Oksanen,
J. Tulkki
Abstract:
Near-field and resonance effects have a strong influence on the nanoscale electromagnetic energy transfer, and detailed understanding of these effects is required for the design of new, optimized nano-optical devices. We provide a comprehensive microscopic view of electromagnetic energy transfer phenomena by introducing quantum Langevin heat baths as local noise sources in the equations of motion…
▽ More
Near-field and resonance effects have a strong influence on the nanoscale electromagnetic energy transfer, and detailed understanding of these effects is required for the design of new, optimized nano-optical devices. We provide a comprehensive microscopic view of electromagnetic energy transfer phenomena by introducing quantum Langevin heat baths as local noise sources in the equations of motion for the thermally fluctuating electric dipoles forming dielectric bodies. The theory is, in a sense, the microscopic generalization of the well-known fluctuational electrodynamics theory and thereby provides an alternative and conceptually simple way to calculate the local emission and absorption rates from the local Langevin bath currents. We apply the model to study energy transfer between silicon carbide nanoparticles located in a microcavity formed of two mirrors and next to a surface supporting propagating surface modes. The results show that the heat current between the dipoles placed in a cavity oscillates as a function of their position and distance and can be enhanced by several orders of magnitude as compared to the free space heat current with a similar interparticle distance. The predicted enhancement can be viewed as a many-body generalization of the well-known cavity Purcell effect. Similar effects are also observed in the interparticle heat transfer between dipoles located next to a surface of a polar material supporting surface phonon polaritons.
△ Less
Submitted 19 March, 2014; v1 submitted 17 October, 2013;
originally announced October 2013.
-
Thermal balance and quantum heat transport in nanostructures thermalized by local Langevin heat baths
Authors:
K. Sääskilahti,
J. Oksanen,
J. Tulkki
Abstract:
Modeling of thermal transport in practical nanostructures requires making trade-offs between the size of the system and the completeness of the model. We study quantum heat transfer in a self-consistent thermal bath setup consisting of two lead regions connected by a center region. Atoms both in the leads and in the center region are coupled to quantum Langevin heat baths that mimic the dam** an…
▽ More
Modeling of thermal transport in practical nanostructures requires making trade-offs between the size of the system and the completeness of the model. We study quantum heat transfer in a self-consistent thermal bath setup consisting of two lead regions connected by a center region. Atoms both in the leads and in the center region are coupled to quantum Langevin heat baths that mimic the dam** and dephasing of phonon waves by anharmonic scattering. This approach treats the leads and the center region on same footing and thereby allows for a simple and physically transparent thermalization of the system, enabling also perfect acoustic matching between the leads and the center region. Increasing the strength of the coupling reduces the mean free path of phonons and gradually shifts phonon transport from ballistic regime to diffusive regime. In the center region, the bath temperatures are determined self-consistently from the requirement of zero net energy exchange between the local heat bath and each atom. By solving the stochastic equations of motion in frequency space and averaging over noise using the general fluctuation-dissipation relation derived by Dhar and Roy [J. Stat. Phys. 125, 801 (2006)], we derive the formula for thermal current, which contains the Caroli formula for phonon transmission function and reduces to the Landauer-Büttiker formula in the limit of vanishing coupling to local heat baths.
△ Less
Submitted 5 August, 2013; v1 submitted 22 March, 2013;
originally announced March 2013.
-
Thermal conduction and interface effects in nanoscale Fermi-Pasta-Ulam conductors
Authors:
K. Sääskilahti,
J. Oksanen,
R. P. Linna,
J. Tulkki
Abstract:
We perform classical non-equilibrium molecular dynamics simulations to calculate heat flow through a microscopic junction connecting two larger reservoirs. In contrast to earlier works, we also include the reservoirs in the simulated region to study the effect of the bulk-nanostructure interfaces and the bulk conductance. The scalar Fermi--Pasta--Ulam (FPU) model is used to describe the effects of…
▽ More
We perform classical non-equilibrium molecular dynamics simulations to calculate heat flow through a microscopic junction connecting two larger reservoirs. In contrast to earlier works, we also include the reservoirs in the simulated region to study the effect of the bulk-nanostructure interfaces and the bulk conductance. The scalar Fermi--Pasta--Ulam (FPU) model is used to describe the effects of anharmonic interactions in a simple manner. The temperature profile close to the junction in the low temperature limit is shown to exhibit strong directional features that fade out when temperature increases. Simulating both the FPU chain and the two bulk regions is also shown to eliminate the non-monotous temperature variations found for simpler geometries and models. We show that with sufficiently large reservoirs, the temperature profile in the chain does not depend on the details of thermalization used at the boundaries.
△ Less
Submitted 16 August, 2012; v1 submitted 3 February, 2012;
originally announced February 2012.
-
Local Semiconducting Transition in Armchair Carbon Nanotubes: The Effect of Periodic Bi-site Perturbation on Electronic and Transport Properties of Carbon Nanotubes
Authors:
M. J. Hashemi,
K. Sääskilahti,
M. J. Puska
Abstract:
In carbon nanotubes, the most abundant defects, caused for example by irradiation or chemisorption treatments, are small perturbing clusters, i.e. bi-site defects, extending over both A and B sites. The relative positions of these perturbing clusters play a crucial role in determining the electronic properties of carbon nanotubes. Using bandstructure and electronic transport calculations, we find…
▽ More
In carbon nanotubes, the most abundant defects, caused for example by irradiation or chemisorption treatments, are small perturbing clusters, i.e. bi-site defects, extending over both A and B sites. The relative positions of these perturbing clusters play a crucial role in determining the electronic properties of carbon nanotubes. Using bandstructure and electronic transport calculations, we find out that in the case of armchair metallic nanotubes a band gap opens up when the clusters fulfill a certain periodicity condition. This phenomenon might be used in future nanoelectronic devices in which certain regions of single metallic nanotubes could be turned to semiconducting ones. Although in this work we study specifically the effect of hydrogen adatom clusters, the phenomenon is general for different types of defects. Moreover, we study the influence of the length and randomness of the defected region on the electron transport through it.
△ Less
Submitted 3 January, 2011;
originally announced January 2011.
-
Gate-controlled current switch in graphene
Authors:
Kimmo Sääskilahti,
Ari Harju,
Pirjo Pasanen
Abstract:
We study numerically cross conductances in a four-terminal all-graphene setup. We show that far away from the Dirac point current flows along zigzag directions, giving the possibility to guide the current between terminals using a tunable pn-junction. The device operates as a gate-controlled current switch, and the electronic properties of graphene are crucial for efficient performance.
We study numerically cross conductances in a four-terminal all-graphene setup. We show that far away from the Dirac point current flows along zigzag directions, giving the possibility to guide the current between terminals using a tunable pn-junction. The device operates as a gate-controlled current switch, and the electronic properties of graphene are crucial for efficient performance.
△ Less
Submitted 1 November, 2009; v1 submitted 22 June, 2009;
originally announced June 2009.
