-
Improved limit on neutrinoless double beta decay of \mohundred~from AMoRE-I
Authors:
A. Agrawal,
V. V. Alenkov,
P. Aryal,
J. Beyer,
B. Bhandari,
R. S. Boiko,
K. Boonin,
O. Buzanov,
C. R. Byeon,
N. Chanthima,
M. K. Cheoun,
J. S. Choe,
Seonho Choi,
S. Choudhury,
J. S. Chung,
F. A. Danevich,
M. Djamal,
D. Drung,
C. Enss,
A. Fleischmann,
A. M. Gangapshev,
L. Gastaldo,
Y. M. Gavrilyuk,
A. M. Gezhaev,
O. Gileva
, et al. (83 additional authors not shown)
Abstract:
AMoRE searches for the signature of neutrinoless double beta decay of $^{100}$Mo with a 100 kg sample of enriched $^{100}$Mo. Scintillating molybdate crystals coupled with a metallic magnetic calorimeter operate at milli-Kelvin temperatures to measure the energy of electrons emitted in the decay. As a demonstration of the full-scale AMoRE, we conducted AMoRE-I, a pre-experiment with 18 molybdate c…
▽ More
AMoRE searches for the signature of neutrinoless double beta decay of $^{100}$Mo with a 100 kg sample of enriched $^{100}$Mo. Scintillating molybdate crystals coupled with a metallic magnetic calorimeter operate at milli-Kelvin temperatures to measure the energy of electrons emitted in the decay. As a demonstration of the full-scale AMoRE, we conducted AMoRE-I, a pre-experiment with 18 molybdate crystals, at the Yangyang Underground Laboratory for over two years. The exposure was 8.02 kg$\cdot$year (or 3.89 kg$_{\mathrm{^{100}Mo}}\cdot$year) and the total background rate near the Q-value was 0.025 $\pm$ 0.002 counts/keV/kg/year. We observed no indication of $0νββ$ decay and report a new lower limit of the half-life of $^{100}$Mo $0νββ$ decay as $ T^{0ν}_{1/2}>3.0\times10^{24}~\mathrm{years}$ at 90\% confidence level. The effective Majorana mass limit range is $m_{ββ}<$(210--610) meV using nuclear matrix elements estimated in the framework of different models, including the recent shell model calculations.
△ Less
Submitted 8 July, 2024;
originally announced July 2024.
-
Projected background and sensitivity of AMoRE-II
Authors:
A. Agrawal,
V. V. Alenkov,
P. Aryal,
J. Beyer,
B. Bhandari,
R. S. Boiko,
K. Boonin,
O. Buzanov,
C. R. Byeon,
N. Chanthima,
M. K. Cheoun,
J. S. Choe,
Seonho Choi,
S. Choudhury,
J. S. Chung,
F. A. Danevich,
M. Djamal,
D. Drung,
C. Enss,
A. Fleischmann,
A. M. Gangapshev,
L. Gastaldo,
Y. M. Gavrilyuk,
A. M. Gezhaev,
O. Gileva
, et al. (81 additional authors not shown)
Abstract:
AMoRE-II aims to search for neutrinoless double beta decay with an array of 423 Li$_2$$^{100}$MoO$_4$ crystals operating in the cryogenic system as the main phase of the Advanced Molybdenum-based Rare process Experiment (AMoRE). AMoRE has been planned to operate in three phases: AMoRE-pilot, AMoRE-I, and AMoRE-II. AMoRE-II is currently being installed at the Yemi Underground Laboratory, located ap…
▽ More
AMoRE-II aims to search for neutrinoless double beta decay with an array of 423 Li$_2$$^{100}$MoO$_4$ crystals operating in the cryogenic system as the main phase of the Advanced Molybdenum-based Rare process Experiment (AMoRE). AMoRE has been planned to operate in three phases: AMoRE-pilot, AMoRE-I, and AMoRE-II. AMoRE-II is currently being installed at the Yemi Underground Laboratory, located approximately 1000 meters deep in Jeongseon, Korea. The goal of AMoRE-II is to reach up to $T^{0νββ}_{1/2}$ $\sim$ 6 $\times$ 10$^{26}$ years, corresponding to an effective Majorana mass of 15 - 29 meV, covering all the inverted mass hierarchy regions. To achieve this, the background level of the experimental configurations and possible background sources of gamma and beta events should be well understood. We have intensively performed Monte Carlo simulations using the GEANT4 toolkit in all the experimental configurations with potential sources. We report the estimated background level that meets the 10$^{-4}$counts/(keV$\cdot$kg$\cdot$yr) requirement for AMoRE-II in the region of interest (ROI) and show the projected half-life sensitivity based on the simulation study.
△ Less
Submitted 13 June, 2024;
originally announced June 2024.
-
Experimenting with Multi-Agent Software Development: Towards a Unified Platform
Authors:
Malik Abdul Sami,
Muhammad Waseem,
Zeeshan Rasheed,
Mika Saari,
Kari Systä,
Pekka Abrahamsson
Abstract:
Large language models are redefining software engineering by implementing AI-powered techniques throughout the whole software development process, including requirement gathering, software architecture, code generation, testing, and deployment. However, it is still difficult to develop a cohesive platform that consistently produces the best outcomes across all stages. The objective of this study i…
▽ More
Large language models are redefining software engineering by implementing AI-powered techniques throughout the whole software development process, including requirement gathering, software architecture, code generation, testing, and deployment. However, it is still difficult to develop a cohesive platform that consistently produces the best outcomes across all stages. The objective of this study is to develop a unified platform that utilizes multiple artificial intelligence agents to automate the process of transforming user requirements into well-organized deliverables. These deliverables include user stories, prioritization, and UML sequence diagrams, along with the modular approach to APIs, unit tests, and end-to-end tests. Additionally, the platform will organize tasks, perform security and compliance, and suggest design patterns and improvements for non-functional requirements. We allow users to control and manage each phase according to their preferences. In addition, the platform provides security and compliance checks following European standards and proposes design optimizations. We use multiple models, such as GPT-3.5, GPT-4, and Llama3 to enable to generation of modular code as per user choice. The research also highlights the limitations and future research discussions to overall improve the software development life cycle. The source code for our uniform platform is hosted on GitHub, enabling additional experimentation and supporting both research and practical uses. \end
△ Less
Submitted 8 June, 2024;
originally announced June 2024.
-
System for systematic literature review using multiple AI agents: Concept and an empirical evaluation
Authors:
Abdul Malik Sami,
Zeeshan Rasheed,
Kai-Kristian Kemell,
Muhammad Waseem,
Terhi Kilamo,
Mika Saari,
Anh Nguyen Duc,
Kari Systä,
Pekka Abrahamsson
Abstract:
Systematic Literature Reviews (SLRs) have become the foundation of evidence-based studies, enabling researchers to identify, classify, and combine existing studies based on specific research questions. Conducting an SLR is largely a manual process. Over the previous years, researchers have made significant progress in automating certain phases of the SLR process, aiming to reduce the effort and ti…
▽ More
Systematic Literature Reviews (SLRs) have become the foundation of evidence-based studies, enabling researchers to identify, classify, and combine existing studies based on specific research questions. Conducting an SLR is largely a manual process. Over the previous years, researchers have made significant progress in automating certain phases of the SLR process, aiming to reduce the effort and time needed to carry out high-quality SLRs. However, there is still a lack of AI agent-based models that automate the entire SLR process. To this end, we introduce a novel multi-AI agent model designed to fully automate the process of conducting an SLR. By utilizing the capabilities of Large Language Models (LLMs), our proposed model streamlines the review process, enhancing efficiency and accuracy. The model operates through a user-friendly interface where researchers input their topic, and in response, the model generates a search string used to retrieve relevant academic papers. Subsequently, an inclusive and exclusive filtering process is applied, focusing on titles relevant to the specific research area. The model then autonomously summarizes the abstracts of these papers, retaining only those directly related to the field of study. In the final phase, the model conducts a thorough analysis of the selected papers concerning predefined research questions. We also evaluated the proposed model by sharing it with ten competent software engineering researchers for testing and analysis. The researchers expressed strong satisfaction with the proposed model and provided feedback for further improvement. The code for this project can be found on the GitHub repository at https://github.com/GPT-Laboratory/SLR-automation.
△ Less
Submitted 13 March, 2024;
originally announced March 2024.
-
CodePori: Large Scale Model for Autonomous Software Development by Using Multi-Agents
Authors:
Zeeshan Rasheed,
Muhammad Waseem,
Mika Saari,
Kari Systä,
Pekka Abrahamsson
Abstract:
Large Language Models (LLMs) and Generative Pre-trained Transformers (GPTs) are resha** the field of Software Engineering (SE). Existing LLM-based multi-agent systems have successfully resolved simple dialogue tasks. However, the potential of LLMs for more complex tasks, such as automated code generation for large and complex projects, have been explored in only a few existing works. This paper…
▽ More
Large Language Models (LLMs) and Generative Pre-trained Transformers (GPTs) are resha** the field of Software Engineering (SE). Existing LLM-based multi-agent systems have successfully resolved simple dialogue tasks. However, the potential of LLMs for more complex tasks, such as automated code generation for large and complex projects, have been explored in only a few existing works. This paper introduces CodePori, a novel model designed to automate code generation for extensive and complex software projects based on natural language prompts. We employ LLM-based multi-AI agents to handle creative and challenging tasks in autonomous software development. Each agent engages with a specific task, including system design, code development, code review, code verification, and test engineering. We show in the paper that CodePori is able to generate running code for large-scale projects, completing the entire software development process in minutes rather than hours, and at a cost of a few dollars. It identifies and mitigates potential security vulnerabilities and corrects errors while maintaining a solid code performance level. We also conducted an evaluation of CodePori against existing solutions using HumanEval and the Massively Multitask Benchmark for Python (MBPP) benchmark. The results indicate that CodePori improves upon the benchmarks in terms of code accuracy, efficiency, and overall performance. For example, CodePori improves the pass@1 metric on HumanEval to 87.5% and on MBPP to 86.5%, representing a clear improvement over the existing models. We also assessed CodePori's performance through practitioner evaluations, with 91% expressing satisfaction with the model's performance.
△ Less
Submitted 2 February, 2024;
originally announced February 2024.
-
Background study of the AMoRE-pilot experiment
Authors:
A. Agrawal,
V. V. Alenkov,
P. Aryal,
J. Beyer,
B. Bhandari,
R. S. Boiko,
K. Boonin,
O. Buzanov,
C. R. Byeon,
N. Chanthima,
M. K. Cheoun,
J. S. Choe,
Seonho Choi,
S. Choudhury,
J. S. Chung,
F. A. Danevich,
M. Djamal,
D. Drung,
C. Enss,
A. Fleischmann,
A. M. Gangapshev,
L. Gastaldo,
Yu. M. Gavrilyuk,
A. M. Gezhaev,
O. Gileva
, et al. (83 additional authors not shown)
Abstract:
We report a study on the background of the Advanced Molybdenum-Based Rare process Experiment (AMoRE), a search for neutrinoless double beta decay (\znbb) of $^{100}$Mo. The pilot stage of the experiment was conducted using $\sim$1.9 kg of \CAMOO~ crystals at the Yangyang Underground Laboratory, South Korea, from 2015 to 2018. We compared the measured $β/γ$ energy spectra in three experimental conf…
▽ More
We report a study on the background of the Advanced Molybdenum-Based Rare process Experiment (AMoRE), a search for neutrinoless double beta decay (\znbb) of $^{100}$Mo. The pilot stage of the experiment was conducted using $\sim$1.9 kg of \CAMOO~ crystals at the Yangyang Underground Laboratory, South Korea, from 2015 to 2018. We compared the measured $β/γ$ energy spectra in three experimental configurations with the results of Monte Carlo simulations and identified the background sources in each configuration. We replaced several detector components and enhanced the neutron shielding to lower the background level between configurations. A limit on the half-life of $0νββ$ decay of $^{100}$Mo was found at $T_{1/2}^{0ν} \ge 3.0\times 10^{23}$ years at 90\% confidence level, based on the measured background and its modeling. Further reduction of the background rate in the AMoRE-I and AMoRE-II are discussed.
△ Less
Submitted 7 April, 2024; v1 submitted 15 January, 2024;
originally announced January 2024.
-
Generative Artificial Intelligence for Software Engineering -- A Research Agenda
Authors:
Anh Nguyen-Duc,
Beatriz Cabrero-Daniel,
Adam Przybylek,
Chetan Arora,
Dron Khanna,
Tomas Herda,
Usman Rafiq,
Jorge Melegati,
Eduardo Guerra,
Kai-Kristian Kemell,
Mika Saari,
Zheying Zhang,
Huy Le,
Tho Quan,
Pekka Abrahamsson
Abstract:
Generative Artificial Intelligence (GenAI) tools have become increasingly prevalent in software development, offering assistance to various managerial and technical project activities. Notable examples of these tools include OpenAIs ChatGPT, GitHub Copilot, and Amazon CodeWhisperer. Although many recent publications have explored and evaluated the application of GenAI, a comprehensive understandin…
▽ More
Generative Artificial Intelligence (GenAI) tools have become increasingly prevalent in software development, offering assistance to various managerial and technical project activities. Notable examples of these tools include OpenAIs ChatGPT, GitHub Copilot, and Amazon CodeWhisperer. Although many recent publications have explored and evaluated the application of GenAI, a comprehensive understanding of the current development, applications, limitations, and open challenges remains unclear to many. Particularly, we do not have an overall picture of the current state of GenAI technology in practical software engineering usage scenarios. We conducted a literature review and focus groups for a duration of five months to develop a research agenda on GenAI for Software Engineering. We identified 78 open Research Questions (RQs) in 11 areas of Software Engineering. Our results show that it is possible to explore the adoption of GenAI in partial automation and support decision-making in all software development activities. While the current literature is skewed toward software implementation, quality assurance and software maintenance, other areas, such as requirements engineering, software design, and software engineering education, would need further research attention. Common considerations when implementing GenAI include industry-level assessment, dependability and accuracy, data accessibility, transparency, and sustainability aspects associated with the technology. GenAI is bringing significant changes to the field of software engineering. Nevertheless, the state of research on the topic still remains immature. We believe that this research agenda holds significance and practical value for informing both researchers and practitioners about current applications and guiding future research.
△ Less
Submitted 28 October, 2023;
originally announced October 2023.
-
Status and performance of the AMoRE-I experiment on neutrinoless double beta decay
Authors:
H. B. Kim,
D. H. Ha,
E. J. Jeon,
J. A. Jeon,
H. S. Jo,
C. S. Kang,
W. G. Kang,
H. S. Kim,
S. C. Kim,
S. G. Kim,
S. K. Kim,
S. R. Kim,
W. T. Kim,
Y. D. Kim,
Y. H. Kim,
D. H. Kwon,
E. S. Lee,
H. J. Lee,
H. S. Lee,
J. S. Lee,
M. H. Lee,
S. W. Lee,
Y. C. Lee,
D. S. Leonard,
H. S. Lim
, et al. (10 additional authors not shown)
Abstract:
AMoRE is an international project to search for the neutrinoless double beta decay of $^{100}$Mo using a detection technology consisting of magnetic microcalorimeters (MMCs) and molybdenum-based scintillating crystals. Data collection has begun for the current AMORE-I phase of the project, an upgrade from the previous pilot phase. AMoRE-I employs thirteen $^\mathrm{48depl.}$Ca$^{100}$MoO$_4$ cryst…
▽ More
AMoRE is an international project to search for the neutrinoless double beta decay of $^{100}$Mo using a detection technology consisting of magnetic microcalorimeters (MMCs) and molybdenum-based scintillating crystals. Data collection has begun for the current AMORE-I phase of the project, an upgrade from the previous pilot phase. AMoRE-I employs thirteen $^\mathrm{48depl.}$Ca$^{100}$MoO$_4$ crystals and five Li$_2$$^{100}$MoO$_4$ crystals for a total crystal mass of 6.2 kg. Each detector module contains a scintillating crystal with two MMC channels for heat and light detection. We report the present status of the experiment and the performance of the detector modules.
△ Less
Submitted 5 November, 2022;
originally announced November 2022.
-
Alpha backgrounds in the AMoRE-Pilot experiment
Authors:
V. Alenkov,
H. W. Bae,
J. Beyer,
R. S. Boiko,
K. Boonin,
O. Buzanov,
N. Chanthima,
M. K. Cheoun,
S. H. Choi,
F. A. Danevich,
M. Djamal,
D. Drung,
C. Enss,
A. Fleischmann,
A. Gangapshev,
L. Gastaldo,
Yu. M. Gavriljuk,
A. Gezhaev,
V. D. Grigoryeva,
V. Gurentsov,
D. H. Ha,
C. Ha,
E. J. Ha,
I. Hahn,
E. J. Jeon
, et al. (81 additional authors not shown)
Abstract:
The Advanced Mo-based Rare process Experiment (AMoRE)-Pilot experiment is an initial phase of the AMoRE search for neutrinoless double beta decay of $^{100}$Mo, with the purpose of investigating the level and sources of backgrounds. Searches for neutrinoless double beta decay generally require ultimately low backgrounds. Surface $α$ decays on the crystals themselves or nearby materials can deposit…
▽ More
The Advanced Mo-based Rare process Experiment (AMoRE)-Pilot experiment is an initial phase of the AMoRE search for neutrinoless double beta decay of $^{100}$Mo, with the purpose of investigating the level and sources of backgrounds. Searches for neutrinoless double beta decay generally require ultimately low backgrounds. Surface $α$ decays on the crystals themselves or nearby materials can deposit a continuum of energies that can be as high as the $Q$-value of the decay itself and may fall in the region of interest (ROI). To understand these background events, we studied backgrounds from radioactive contaminations internal to and on the surface of the crystals or nearby materials with Geant4-based Monte Carlo simulations. In this study, we report on the measured $α$ energy spectra fitted with the corresponding simulated spectra for six crystal detectors, where sources of background contributions could be identified through high energy $α$ peaks and continuum parts in the energy spectrum for both internal and surface contaminations. We determine the low-energy contributions from internal and surface $α$ contaminations by extrapolating from the $α$ background fitting model.
△ Less
Submitted 5 December, 2022; v1 submitted 16 July, 2021;
originally announced July 2021.
-
Electrochemical Degradation of Methylene Blue Using Ce(IV) Ionic Mediator in the Presence of Ag(I) Ion Catalyst for Environmental Remediation
Authors:
Henry Setiyanto,
Feni Mustika Sari,
Muhammad Yudhistira Azis,
Ria Sri Rahayu,
Amminudin Sulaeman,
Muhammad Ali Zulfikar,
Diah Ratnaningrum,
Vienna Saraswaty
Abstract:
Methylene blue (MB) is often used in textile industries and is actively present in the wastewater runs-off. Recently, mediated electrochemical oxidation (MEO) offers a fast, reliable and promising results for environmental remediation. Thus, we aimed to evaluate the electro-degradation potential of MB by MEO using Ce(IV) ionic mediator. Furthermore, we also observed the influence of addition Ag(I)…
▽ More
Methylene blue (MB) is often used in textile industries and is actively present in the wastewater runs-off. Recently, mediated electrochemical oxidation (MEO) offers a fast, reliable and promising results for environmental remediation. Thus, we aimed to evaluate the electro-degradation potential of MB by MEO using Ce(IV) ionic mediator. Furthermore, we also observed the influence of addition Ag(I) ion catalyst in MEO for degradation of MB. The electro-degradation of MB was evaluated by cyclic voltammetry technique and was confirmed by UV-Vis spectrophotometry, high performance liquid chromatography (HPLC) analysis and back-titration analysis. The results showed that in the absence of Ag(I) ion catalyst, about 89 % of MB was decolorized within 30 minutes. When 2 mM of Ag(I) ion catalyst was applied, the electro-degradation of MB was increased to maximum value of 100%. The UV-Vis spectrum confirmed the electro-degradation of MB as suggested by decreased maximum absorbance value at λ 668 nm from 2.125 to 0.059. The HPLC analysis showed the formation of five new peaks at retention time of 1.331, 1.495, 1.757, 1.908 and 2.017 minutes, confirming the electro-degradation of MB. The back-titration analysis showed about 52.9% of CO2 was produced during electro-degradation of MB by MEO. More importantly, more than 97% of Ce(IV) ionic mediator were recovered in our investigation. Our results reveal the potential of MEO using Ce(IV) ionic mediator to improve the wastewater runs-off quality from textile as well as other industries containing methylene blue.
△ Less
Submitted 17 May, 2021;
originally announced May 2021.
-
A stability preserved time-integration method for nonlinear advection-diffusion models
Authors:
Huseyin Tunc,
Murat Sari
Abstract:
A new implicit-explicit local differential transform method (IELDTM) is derived here for time integration of the nonlinear advection-diffusion processes represented by (2+1)-dimensional Burgers equation. The IELDTM is adaptively constructed as stability preserved and high order time integrator for spatially discretized Burgers equation. For spatial discretization of the model equation, the Chebysh…
▽ More
A new implicit-explicit local differential transform method (IELDTM) is derived here for time integration of the nonlinear advection-diffusion processes represented by (2+1)-dimensional Burgers equation. The IELDTM is adaptively constructed as stability preserved and high order time integrator for spatially discretized Burgers equation. For spatial discretization of the model equation, the Chebyshev spectral collocation method (ChCM) is utilized. A robust stability analysis and global error analysis of the IELDTM are presented with respect to the direction parameter θ. With the help of the global error analysis, adaptivity equations are derived to minimize the computational costs of the algorithms. The produced method is shown to eliminate the accuracy disadvantage of the classical θ-method and the stability disadvantages of the existing DTM-based methods. Two examples of the Burgers equation in one and two dimensions have been solved via the ChCM-IELDTM hybridization, and the produced results are compared with the literature. The present time integrator has been proven to produce more accurate numerical results than the MATLAB solvers, ode45 and ode15s.
△ Less
Submitted 14 April, 2021;
originally announced April 2021.
-
A spatial local method for solving 2D and 3D advection-diffusion equations
Authors:
Huseyin Tunc,
Murat Sari
Abstract:
In this study, an implicit-explicit local differential transform method (IELDTM) based on Taylor series representations is produced for solving 2D and 3D advection-diffusion equations. The parabolic advection-diffusion equations are reduced to the nonhomogeneous elliptic system of partial differential equations with the utilization of the Chebyshev spectral collocation approach in temporal variabl…
▽ More
In this study, an implicit-explicit local differential transform method (IELDTM) based on Taylor series representations is produced for solving 2D and 3D advection-diffusion equations. The parabolic advection-diffusion equations are reduced to the nonhomogeneous elliptic system of partial differential equations with the utilization of the Chebyshev spectral collocation approach in temporal variable. The IELDTM is constructed over 2D and 3D meshes using continuity equations of the neighbour representations with either explicit or implicit forms in related directions. The IELDTM is proven to have excellent convergence properties by experimentally illustrating both h-refinement and p-refinement outcomes. A distinctive feature of the IELDTM over existing numerical techniques is the optimization of the local spatial degrees of freedom. It has been proven that IELDTM provides more accurate results with far less degrees of freedom than the finite difference, finite element and spectral methods.
△ Less
Submitted 11 April, 2021;
originally announced April 2021.
-
A New Implicit-Explicit Local Method to Capture Stiff Behavior with COVID-19 Outbreak Application
Authors:
Huseyin Tunc,
Murat Sari
Abstract:
In this paper, a new implicit-explicit local method with an arbitrary order is produced for stiff initial value problems. Here, a general method for one-step time integrations has been created, considering a direction free approach for integrations leading to a numerical method with parameter-based stability preservation. Adaptive procedures depending on the problem types for the current method ar…
▽ More
In this paper, a new implicit-explicit local method with an arbitrary order is produced for stiff initial value problems. Here, a general method for one-step time integrations has been created, considering a direction free approach for integrations leading to a numerical method with parameter-based stability preservation. Adaptive procedures depending on the problem types for the current method are explained with the help of local error estimates to minimize the computational cost. Priority error analysis of the current method is made, and order conditions are presented in terms of direction parameters. Stability analysis of the method is performed for both scalar equations and systems of differential equations. The currently produced parameter-based method has been proven to provide A-stability, for 0.5<θ<1, in various orders. The present method has been shown to be a very good option for addressing a wide range of initial value problems through numerical experiments. It can be seen as a significant contribution that the Susceptible-Exposed-Infected-Recovered equation system parameterized for the COVID-19 pandemic has been integrated with the present method and stability properties of the method have been tested on this stiff model and significant results are produced. Some challenging stiff behaviours represented by the nonlinear Duffing equation, Robertson chemical system, and van der Pol equation have also been integrated, and the results revealed that the current algorithm produces much more reliable results than numerical techniques in the literature.
△ Less
Submitted 6 April, 2021;
originally announced April 2021.
-
QUAREP-LiMi: A community-driven initiative to establish guidelines for quality assessment and reproducibility for instruments and images in light microscopy
Authors:
Glyn Nelson,
Ulrike Boehm,
Steve Bagley,
Peter Bajcsy,
Johanna Bischof,
Claire M Brown,
Aurelien Dauphin,
Ian M Dobbie,
John E Eriksson,
Orestis Faklaris,
Julia Fernandez-Rodriguez,
Alexia Ferrand,
Laurent Gelman,
Ali Gheisari,
Hella Hartmann,
Christian Kukat,
Alex Laude,
Miso Mitkovski,
Sebastian Munck,
Alison J North,
Tobias M Rasse,
Ute Resch-Genger,
Lucas C Schuetz,
Arne Seitz,
Caterina Strambio-De-Castillia
, et al. (75 additional authors not shown)
Abstract:
In April 2020, the QUality Assessment and REProducibility for Instruments and Images in Light Microscopy (QUAREP-LiMi) initiative was formed. This initiative comprises imaging scientists from academia and industry who share a common interest in achieving a better understanding of the performance and limitations of microscopes and improved quality control (QC) in light microscopy. The ultimate goal…
▽ More
In April 2020, the QUality Assessment and REProducibility for Instruments and Images in Light Microscopy (QUAREP-LiMi) initiative was formed. This initiative comprises imaging scientists from academia and industry who share a common interest in achieving a better understanding of the performance and limitations of microscopes and improved quality control (QC) in light microscopy. The ultimate goal of the QUAREP-LiMi initiative is to establish a set of common QC standards, guidelines, metadata models, and tools, including detailed protocols, with the ultimate aim of improving reproducible advances in scientific research. This White Paper 1) summarizes the major obstacles identified in the field that motivated the launch of the QUAREP-LiMi initiative; 2) identifies the urgent need to address these obstacles in a grassroots manner, through a community of stakeholders including, researchers, imaging scientists, bioimage analysts, bioimage informatics developers, corporate partners, funding agencies, standards organizations, scientific publishers, and observers of such; 3) outlines the current actions of the QUAREP-LiMi initiative, and 4) proposes future steps that can be taken to improve the dissemination and acceptance of the proposed guidelines to manage QC. To summarize, the principal goal of the QUAREP-LiMi initiative is to improve the overall quality and reproducibility of light microscope image data by introducing broadly accepted standard practices and accurately captured image data metrics.
△ Less
Submitted 27 January, 2021; v1 submitted 21 January, 2021;
originally announced January 2021.
-
First Results from the AMoRE-Pilot neutrinoless double beta decay experiment
Authors:
V. Alenkov,
H. W. Bae,
J. Beyer,
R. S. Boiko,
K. Boonin,
O. Buzanov,
N. Chanthima,
M. K. Cheoun,
D. M. Chernyak,
J. S. Choe,
S. Choi,
F. A. Danevich,
M. Djamal,
D. Drung,
C. Enss,
A. Fleischmann,
A. M. Gangapshev,
L. Gastaldo,
Yu. M. Gavriljuk,
A. M. Gezhaev,
V. D. Grigoryeva,
V. I. Gurentsov,
O. Gylova,
C. Ha,
D. H. Ha
, et al. (84 additional authors not shown)
Abstract:
The Advanced Molybdenum-based Rare process Experiment (AMoRE) aims to search for neutrinoless double beta decay (0$νββ$) of $^{100}$Mo with $\sim$100 kg of $^{100}$Mo-enriched molybdenum embedded in cryogenic detectors with a dual heat and light readout. At the current, pilot stage of the AMoRE project we employ six calcium molybdate crystals with a total mass of 1.9 kg, produced from $^{48}$Ca-de…
▽ More
The Advanced Molybdenum-based Rare process Experiment (AMoRE) aims to search for neutrinoless double beta decay (0$νββ$) of $^{100}$Mo with $\sim$100 kg of $^{100}$Mo-enriched molybdenum embedded in cryogenic detectors with a dual heat and light readout. At the current, pilot stage of the AMoRE project we employ six calcium molybdate crystals with a total mass of 1.9 kg, produced from $^{48}$Ca-depleted calcium and $^{100}$Mo-enriched molybdenum ($^{48\textrm{depl}}$Ca$^{100}$MoO$_4$). The simultaneous detection of heat(phonon) and scintillation (photon) signals is realized with high resolution metallic magnetic calorimeter sensors that operate at milli-Kelvin temperatures. This stage of the project is carried out in the Yangyang underground laboratory at a depth of 700 m. We report first results from the AMoRE-Pilot $0νββ$ search with a 111 kg$\cdot$d live exposure of $^{48\textrm{depl}}$Ca$^{100}$MoO$_4$ crystals. No evidence for $0νββ$ decay of $^{100}$Mo is found, and a upper limit is set for the half-life of 0$νββ$ of $^{100}$Mo of $T^{0ν}_{1/2} > 9.5\times10^{22}$ y at 90% C.L.. This limit corresponds to an effective Majorana neutrino mass limit in the range $\langle m_{ββ}\rangle\le(1.2-2.1)$ eV.
△ Less
Submitted 7 May, 2019; v1 submitted 22 March, 2019;
originally announced March 2019.
-
$m$-adic residue codes over $\mathbb{F}_q[v]/(v^s-v)$ and their application to quantum codes
Authors:
Ferhat Kuruz,
Mustafa Sarı,
Mehmet E. Koroglu
Abstract:
Due to their rich algebraic structure, cyclic codes have a great deal of significance amongst linear codes. Duadic codes are the generalization of the quadratic residue codes, a special case of cyclic codes. The $m$-adic residue codes are the generalization of the duadic codes. The aim of this paper is to study the structure of the $m$-adic residue codes over the quotient ring…
▽ More
Due to their rich algebraic structure, cyclic codes have a great deal of significance amongst linear codes. Duadic codes are the generalization of the quadratic residue codes, a special case of cyclic codes. The $m$-adic residue codes are the generalization of the duadic codes. The aim of this paper is to study the structure of the $m$-adic residue codes over the quotient ring $\frac{{{\mathbb{F}_q}\left[ v \right]}}{{\left\langle {{v^s} - v} \right\rangle }}$. We determine the idempotent generators of the $m$-adic residue codes over $\frac{{{\mathbb{F}_q}\left[ v \right]}}{{\left\langle {{v^s} - v} \right\rangle }}$. We obtain some parameters of optimal $m$-adic residue codes over $\frac{{{\mathbb{F}_q}\left[ v \right]}}{{\left\langle {{v^s} - v} \right\rangle }}$ with respect to Griesmer bound for rings. Furthermore, we derive a condition for $m$-adic residue codes over $\frac{{{\mathbb{F}_q}\left[ v \right]}}{{\left\langle {{v^s} - v} \right\rangle }}$ to contain their dual. By making use of a preserving-orthogonality Gray map, we construct a family of quantum error correcting codes from the Gray images of dual-containing $m$-adic residue codes over $\frac{{{\mathbb{F}_q}\left[ v \right]}}{{\left\langle {{v^s} - v} \right\rangle }}$ and give some examples to illustrate our findings.
△ Less
Submitted 27 May, 2024; v1 submitted 28 October, 2018;
originally announced October 2018.
-
New quantum mds constacylıc codes
Authors:
Mustafa Sari,
Emre Kolotoglu
Abstract:
This paper is devoted to the study of the construction of new quantum MDS codes. Based on constacyclic codes over Fq2 , we derive four new families of quantum MDS codes, one of which is an explicit generalization of the construction given in Theorem 7 in [22]. We also extend the result of Theorem 3:3 given in [17].
This paper is devoted to the study of the construction of new quantum MDS codes. Based on constacyclic codes over Fq2 , we derive four new families of quantum MDS codes, one of which is an explicit generalization of the construction given in Theorem 7 in [22]. We also extend the result of Theorem 3:3 given in [17].
△ Less
Submitted 5 May, 2017; v1 submitted 18 January, 2017;
originally announced January 2017.
-
On MDS Negacyclic LCD Codes
Authors:
Mehmet E. Koroglu,
Mustafa Sarı
Abstract:
Linear codes with complementary duals (LCD) have a great deal of significance amongst linear codes. Maximum distance separable (MDS) codes are also an important class of linear codes since they achieve the greatest error correcting and detecting capabilities for fixed length and dimension. The construction of linear codes that are both LCD and MDS is a hard task in coding theory. In this paper, we…
▽ More
Linear codes with complementary duals (LCD) have a great deal of significance amongst linear codes. Maximum distance separable (MDS) codes are also an important class of linear codes since they achieve the greatest error correcting and detecting capabilities for fixed length and dimension. The construction of linear codes that are both LCD and MDS is a hard task in coding theory. In this paper, we study the constructions of LCD codes that are MDS from negacyclic codes over finite fields of odd prime power $q$ elements. We construct four families of MDS negacyclic LCD codes of length $n|\frac{q-1}{2}$, $n|\frac{q+1}{2}$ and a family of negacyclic LCD codes of length $n=q-1$. Furthermore, we obtain five families of $q^{2}$-ary Hermitian MDS negacyclic LCD codes of length $n|\left( q-1\right)$ and four families of Hermitian negacyclic LCD codes of length $n=q^{2}+1.$ For both Euclidean and Hermitian cases the dimensions of these codes are determined and for some classes the minimum distances are settled. For the other cases, by studying $q$ and $q^{2}$-cyclotomic classes we give lower bounds on the minimum distance.
△ Less
Submitted 10 September, 2018; v1 submitted 19 November, 2016;
originally announced November 2016.
-
All Colors Shortest Path Problem
Authors:
Yunus Can Bilge,
Doğukan Çağatay,
Begüm Genç,
Mecit Sarı,
Hüseyin Akcan,
Cem Evrendilek
Abstract:
All Colors Shortest Path problem defined on an undirected graph aims at finding a shortest, possibly non-simple, path where every color occurs at least once, assuming that each vertex in the graph is associated with a color known in advance. To the best of our knowledge, this paper is the first to define and investigate this problem. Even though the problem is computationally similar to generalize…
▽ More
All Colors Shortest Path problem defined on an undirected graph aims at finding a shortest, possibly non-simple, path where every color occurs at least once, assuming that each vertex in the graph is associated with a color known in advance. To the best of our knowledge, this paper is the first to define and investigate this problem. Even though the problem is computationally similar to generalized minimum spanning tree, and the generalized traveling salesman problems, allowing for non-simple paths where a node may be visited multiple times makes All Colors Shortest Path problem novel and computationally unique. In this paper we prove that All Colors Shortest Path problem is NP-hard, and does not lend itself to a constant factor approximation. We also propose several heuristic solutions for this problem based on LP-relaxation, simulated annealing, ant colony optimization, and genetic algorithm, and provide extensive simulations for a comparative analysis of them. The heuristics presented are not the standard implementations of the well known heuristic algorithms, but rather sophisticated models tailored for the problem in hand. This fact is acknowledged by the very promising results reported.
△ Less
Submitted 24 July, 2015;
originally announced July 2015.
-
Constrained Paracomplex Mechanical Systems
Authors:
Mehmet Tekkoyun,
Murat Sari
Abstract:
In this study, it is introduced paracomplex analogue of Lagrangians and Hamiltonians with constraints in the framework of para-Kaehlerian manifolds. The geometrical and mechanical results on the constrained mechanical system have also been discussed.
In this study, it is introduced paracomplex analogue of Lagrangians and Hamiltonians with constraints in the framework of para-Kaehlerian manifolds. The geometrical and mechanical results on the constrained mechanical system have also been discussed.
△ Less
Submitted 24 February, 2009;
originally announced February 2009.
-
Bi-Para-Mechanical Systems on Lagrangian Distributions
Authors:
Mehmet Tekkoyun,
Murat Sari
Abstract:
In this work, bi-para-complex analogue of Lagrangian and Hamiltonian systems was introduced on Lagrangian distributions. Yet, the geometric and physical results related to bi-para-dynamical systems were also presented.
In this work, bi-para-complex analogue of Lagrangian and Hamiltonian systems was introduced on Lagrangian distributions. Yet, the geometric and physical results related to bi-para-dynamical systems were also presented.
△ Less
Submitted 8 January, 2009;
originally announced January 2009.
-
Symmetric Teleparallel Gravity: Some exact solutions and spinor couplings
Authors:
Muzaffer Adak,
Özcan Sert,
Mestan Kalay,
Murat Sarı
Abstract:
In this paper we elaborate on the symmetric teleparallel gravity (STPG) written in a non-Riemannian spacetime with nonzero nonmetricity, but zero torsion and zero curvature. Firstly we give a prescription for obtaining the nonmetricity from the metric in a peculiar gauge. Then we state that under a novel prescription of parallel transportation of a tangent vector in this non-Riemannian geometry th…
▽ More
In this paper we elaborate on the symmetric teleparallel gravity (STPG) written in a non-Riemannian spacetime with nonzero nonmetricity, but zero torsion and zero curvature. Firstly we give a prescription for obtaining the nonmetricity from the metric in a peculiar gauge. Then we state that under a novel prescription of parallel transportation of a tangent vector in this non-Riemannian geometry the autoparallel curves coincides with those of the Riemannian spacetimes. Subsequently we represent the symmetric teleparallel theory of gravity by the most general quadratic and parity conserving lagrangian with lagrange multipliers for vanishing torsion and curvature. We show that our lagrangian is equivalent to the Einstein-Hilbert lagrangian for certain values of coupling coefficients. Thus we arrive at calculating the field equations via independent variations. Then we obtain in turn conformal, spherically symmetric static, cosmological and pp-wave solutions exactly. Finally we discuss a minimal coupling of a spin-1/2 field to STPG.
△ Less
Submitted 25 November, 2013; v1 submitted 14 October, 2008;
originally announced October 2008.