-
Mach--Zehnder-like interferometry with graphene nanoribbon networks
Authors:
Sofia Sanz,
Nick Papior,
Géza Giedke,
Daniel Sánchez-Portal,
Mads Brandbyge,
Thomas Frederiksen
Abstract:
We study theoretically electron interference in a Mach--Zehnder-like geometry formed by four zigzag graphene nanoribbons (ZGNRs) arranged in parallel pairs, one on top of the other, such that they form intersection angles of 60$^\circ$. Depending on the interribbon separation, each intersection can be tuned to act either as an electron beam splitter or as a mirror, enabling tuneable circuitry with…
▽ More
We study theoretically electron interference in a Mach--Zehnder-like geometry formed by four zigzag graphene nanoribbons (ZGNRs) arranged in parallel pairs, one on top of the other, such that they form intersection angles of 60$^\circ$. Depending on the interribbon separation, each intersection can be tuned to act either as an electron beam splitter or as a mirror, enabling tuneable circuitry with interfering pathways. Based on the mean-field Hubbard model and Green's function techniques, we evaluate the electron transport properties of such 8-terminal devices and identify pairs of terminals that are subject to self-interference. We further show that the scattering matrix formalism in the approximation of independent scattering at the four individual junctions provides accurate results as compared with the Green's function description, allowing for a simple interpretation of the interference process between two dominant pathways. This enables us to characterize the device sensitivity to phase shifts from an external magnetic flux according to the Aharonov--Bohm effect as well as from small geometric variations in the two path lengths. The proposed devices could find applications as magnetic field sensors and as detectors of phase shifts induced by local scatterers on the different segments, such as adsorbates, impurities or defects. The setup could also be used to create and study quantum entanglement.
△ Less
Submitted 24 May, 2023; v1 submitted 9 February, 2023;
originally announced February 2023.
-
Addressing electron spins embedded in metallic graphene nanoribbons
Authors:
Niklas Friedrich,
Rodrigo E. Menchon,
Iago Pozo,
Jeremy Hieulle,
Alessio Vegliante,
**gcheng Li,
Daniel Sanchez-Portal,
Diego Pena,
Aran Garcia-Lekue,
Jose Ignacio Pascual
Abstract:
Spin-hosting graphene nanostructures are promising metal-free systems for elementary quantum spintronic devices. Conventionally, spins are protected from quenching by electronic bandgaps, which also hinder electronic access to their quantum state. Here, we present a narrow graphene nanoribbon substitutionally doped with boron heteroatoms that combines a metallic character with the presence of loca…
▽ More
Spin-hosting graphene nanostructures are promising metal-free systems for elementary quantum spintronic devices. Conventionally, spins are protected from quenching by electronic bandgaps, which also hinder electronic access to their quantum state. Here, we present a narrow graphene nanoribbon substitutionally doped with boron heteroatoms that combines a metallic character with the presence of localized spin 1/2 states in its interior. The ribbon was fabricated by on-surface synthesis on a Au(111) substrate. Transport measurements through ribbons suspended between the tip and the sample of a scanning tunnelling microscope revealed their ballistic behavior, characteristic of metallic nanowires. Conductance spectra show fingerprints of localized spin states in form of Kondo resonances and inelastic tunnelling excitations. Density functional theory rationalizes the metallic character of the graphene nanoribbon due to the partial depopulation of the valence band induced by the boron atoms. The transferred charge builds localized magnetic moments around the boron atoms. The orthogonal symmetry of the spin-hosting state's and the valence band's wavefunctions protects them from mixing, maintaining the spin states localized. The combination of ballistic transport and spin localization into a single graphene nanoribbon offers the perspective of electronically addressing and controlling carbon spins in real device architectures.
△ Less
Submitted 15 June, 2022;
originally announced June 2022.
-
Spin-polarizing electron beam splitter from crossed graphene nanoribbons
Authors:
Sofia Sanz,
Nick Papior,
Géza Giedke,
Daniel Sánchez-Portal,
Mads Brandbyge,
Thomas Frederiksen
Abstract:
Junctions composed of two crossed graphene nanoribbons (GNRs) have been theoretically proposed as electron beam splitters where incoming electron waves in one GNR can be split coherently into propagating waves in \emph{two} outgoing terminals with nearly equal amplitude and zero back-scattering. Here we scrutinize this effect for devices composed of narrow zigzag GNRs taking explicitly into accoun…
▽ More
Junctions composed of two crossed graphene nanoribbons (GNRs) have been theoretically proposed as electron beam splitters where incoming electron waves in one GNR can be split coherently into propagating waves in \emph{two} outgoing terminals with nearly equal amplitude and zero back-scattering. Here we scrutinize this effect for devices composed of narrow zigzag GNRs taking explicitly into account the role of Coulomb repulsion that leads to spin-polarized edge states within mean-field theory. We show that the beam-splitting effect survives the opening of the well-known correlation gap and, more strikingly, that a \emph{spin-dependent} scattering potential emerges which spin-polarizes the transmitted electrons in the two outputs. A near-perfect polarization can be achieved by joining several junctions in series. Our findings suggest that GNRs are interesting building blocks in spintronics and quantum technologies with applications for interferometry and entanglement.
△ Less
Submitted 12 July, 2022; v1 submitted 18 January, 2022;
originally announced January 2022.
-
SIESTA: recent developments and applications
Authors:
Alberto García,
Nick Papior,
Arsalan Akhtar,
Emilio Artacho,
Volker Blum,
Emanuele Bosoni,
Pedro Brandimarte,
Mads Brandbyge,
J. I. Cerdá,
Fabiano Corsetti,
Ramón Cuadrado,
Vladimir Dikan,
Jaime Ferrer,
Julian Gale,
Pablo García-Fernández,
V. M. García-Suárez,
Sandra García,
Georg Huhs,
Sergio Illera,
Richard Korytár,
Peter Koval,
Irina Lebedeva,
Lin Lin,
Pablo López-Tarifa,
Sara G. Mayo
, et al. (11 additional authors not shown)
Abstract:
A review of the present status, recent enhancements, and applicability of the SIESTA program is presented. Since its debut in the mid-nineties, SIESTA's flexibility, efficiency and free distribution has given advanced materials simulation capabilities to many groups worldwide. The core methodological scheme of SIESTA combines finite-support pseudo-atomic orbitals as basis sets, norm-conserving pse…
▽ More
A review of the present status, recent enhancements, and applicability of the SIESTA program is presented. Since its debut in the mid-nineties, SIESTA's flexibility, efficiency and free distribution has given advanced materials simulation capabilities to many groups worldwide. The core methodological scheme of SIESTA combines finite-support pseudo-atomic orbitals as basis sets, norm-conserving pseudopotentials, and a real-space grid for the representation of charge density and potentials and the computation of their associated matrix elements. Here we describe the more recent implementations on top of that core scheme, which include: full spin-orbit interaction, non-repeated and multiple-contact ballistic electron transport, DFT+U and hybrid functionals, time-dependent DFT, novel reduced-scaling solvers, density-functional perturbation theory, efficient Van der Waals non-local density functionals, and enhanced molecular-dynamics options. In addition, a substantial effort has been made in enhancing interoperability and interfacing with other codes and utilities, such as Wannier90 and the second-principles modelling it can be used for, an AiiDA plugin for workflow automatization, interface to Lua for steering SIESTA runs, and various postprocessing utilities. SIESTA has also been engaged in the Electronic Structure Library effort from its inception, which has allowed the sharing of various low level libraries, as well as data standards and support for them, in particular the PSML definition and library for transferable pseudopotentials, and the interface to the ELSI library of solvers. Code sharing is made easier by the new open-source licensing model of the program. This review also presents examples of application of the capabilities of the code, as well as a view of on-going and future developments.
△ Less
Submitted 1 June, 2020;
originally announced June 2020.
-
Crossed graphene nanoribbons as beam splitters and mirrors for electron quantum optics
Authors:
Sofia Sanz,
Pedro Brandimarte,
Géza Giedke,
Daniel Sánchez-Portal,
Thomas Frederiksen
Abstract:
We analyze theoretically 4-terminal electronic devices composed of two crossed graphene nanoribbons (GNRs) and show that they can function as beam splitters or mirrors. These features are identified for electrons in the low-energy region where a single valence or conduction band is present. Our modeling is based on $p_z$ orbital tight-binding with Slater--Koster type matrix elements fitted to accu…
▽ More
We analyze theoretically 4-terminal electronic devices composed of two crossed graphene nanoribbons (GNRs) and show that they can function as beam splitters or mirrors. These features are identified for electrons in the low-energy region where a single valence or conduction band is present. Our modeling is based on $p_z$ orbital tight-binding with Slater--Koster type matrix elements fitted to accurately reproduce the low-energy bands from density functional theory calculations. We analyze systematically all devices that can be constructed with either zigzag or armchair GNRs in AA and AB stackings. From Green's function theory the elastic electron transport properties are quantified as a function of the ribbon width. We find that devices composed of relatively narrow zigzag GNRs and AA-stacked armchair GNRs are the most interesting candidates to realize electron beam splitters with a close to 50-50 ratio in the two outgoing terminals. Structures with wider ribbons instead provide electron mirrors, where the electron wave is mostly transferred into the outgoing terminal of the other ribbon, or electron filters where the scattering depends sensitively on the wavelength of the propagating electron. We also test the robustness of these transport properties against variations in intersection angle, stacking pattern, lattice deformation (uniaxial strain), inter-GNR separation, and electrostatic potential differences between the layers. These generic features show that GNRs are interesting basic components to construct electronic quantum optical setups.
△ Less
Submitted 27 July, 2020; v1 submitted 22 May, 2020;
originally announced May 2020.
-
Magnetism of topological boundary states induced by boron substitution in graphene nanoribbons
Authors:
Niklas Friedrich,
Pedro Brandimarte,
**gcheng Li,
Shohei Saito,
Shigehiro Yamaguchi,
Iago Pozo,
Diego Peña,
Thomas Frederiksen,
Aran Garcia-Lekue,
Daniel Sánchez-Portal,
José Ignacio Pascual
Abstract:
Graphene nanoribbons (GNRs), low-dimensional platforms for carbon-based electronics, show the promising perspective to also incorporate spin polarization in their conjugated electron system. However, magnetism in GNRs is generally associated to localized states around zigzag edges, difficult to fabricate and with high reactivity. Here we demonstrate that magnetism can also be induced away from phy…
▽ More
Graphene nanoribbons (GNRs), low-dimensional platforms for carbon-based electronics, show the promising perspective to also incorporate spin polarization in their conjugated electron system. However, magnetism in GNRs is generally associated to localized states around zigzag edges, difficult to fabricate and with high reactivity. Here we demonstrate that magnetism can also be induced away from physical GNR zigzag edges through atomically precise engineering topological defects in its interior. A pair of substitutional boron atoms inserted in the carbon backbone breaks the conjugation of their topological bands and builds two spin-polarized boundary states around. The spin state was detected in electrical transport measurements through boron-substituted GNRs suspended between tip and sample of a scanning tunneling microscope. First-principle simulations find that boron pairs induce a spin 1, which is modified by tuning the spacing between pairs. Our results demonstrate a route to embed spin chains in GNRs, turning them basic elements of spintronic devices.
△ Less
Submitted 28 September, 2020; v1 submitted 21 April, 2020;
originally announced April 2020.
-
Theory of Spin-Dependent Electron Transfer Dynamics at Ar/Co(0001) and Ar/Fe(110) Interfaces
Authors:
Moritz Müller,
Pedro Miguel Echenique,
Daniel Sánchez-Portal
Abstract:
Recent core-hole-clock experiments [Phys. Rev. Lett. $\textbf{112}$, 086801 (2014)] showed that the spin dependence of electron injection times at Ar/Co(0001) and Ar/Fe(110) interfaces is at variance with the expectations based on previous calculations for related systems. Here we reconcile theory and experiment, and demonstrate that the observed dependence is rooted in the details of the spin-spl…
▽ More
Recent core-hole-clock experiments [Phys. Rev. Lett. $\textbf{112}$, 086801 (2014)] showed that the spin dependence of electron injection times at Ar/Co(0001) and Ar/Fe(110) interfaces is at variance with the expectations based on previous calculations for related systems. Here we reconcile theory and experiment, and demonstrate that the observed dependence is rooted in the details of the spin-split surface band structures. Our ab initio calculations back that minority electrons are injected significantly faster than majority electrons in line with the experimentally reported ultrashort injection times. The dynamics is particularly sensitive to the size (in reciprocal-space) of the projected band gaps around $\overlineΓ$ for both substrates at the resonance energies. A simple tunneling model incorporating the spin-dependent gap sizes further supports these findings.
△ Less
Submitted 3 February, 2020;
originally announced February 2020.
-
Probing the magnetism of topological end-states in 5-armchair graphene nanoribbons
Authors:
James Lawrence,
Pedro Brandimarte,
Alejandro Berdonces,
Mohammed S. G. Mohammed,
Abhishek Grewal,
Christopher C. Leon,
Daniel Sanchez-Portal,
Dimas G. de Oteyza
Abstract:
We extensively characterize the electronic structure of ultra-narrow graphene nanoribbons (GNRs) with armchair edges and zig-zag termini that have 5 carbon atoms across their width (5-AGNRs), as synthesised on Au(111). Scanning tunnelling spectroscopy measurements on the ribbons, recorded on both the metallic substrate and a decoupling NaCl layer, show well-defined dispersive bands and in-gap stat…
▽ More
We extensively characterize the electronic structure of ultra-narrow graphene nanoribbons (GNRs) with armchair edges and zig-zag termini that have 5 carbon atoms across their width (5-AGNRs), as synthesised on Au(111). Scanning tunnelling spectroscopy measurements on the ribbons, recorded on both the metallic substrate and a decoupling NaCl layer, show well-defined dispersive bands and in-gap states. In combination with theoretical calculations, we show how these in-gap states are topological in nature and localised at the zig-zag termini of the nanoribbons. Besides rationalising the driving force behind the topological class selection of 5-AGNRs, we also uncover the length-dependent behaviour of these end states which transition from singly occupied spin-split states to a closed-shell form as the ribbons become shorter. Finally, we demonstrate the magnetic character of the end states via transport experiments in a model two-terminal device structure in which the ribbons are suspended between the scanning probe and the substrate that both act as leads.
△ Less
Submitted 7 January, 2020; v1 submitted 27 December, 2019;
originally announced December 2019.
-
Electronic Properties of Substitutionally Boron-doped Graphene Nanoribbons on a Au(111) Surface
Authors:
Eduard Carbonell-Sanromà,
Aran Garcia-Lekue,
Martina Corso,
Guillaume Vasseur,
Pedro Brandimarte,
Jorge Lobo-Checa,
Dimas G. de Oteyza,
**gcheng Li,
Shigeki Kawai,
Shohei Saito,
Shigehiro Yamaguchi,
J. Enrique Ortega,
Daniel Sánchez-Portal,
Jose Ignacio Pascual
Abstract:
High quality graphene nanoribbons (GNRs) grown by on-surface synthesis strategies with atomic precision can be controllably doped by inserting heteroatoms or chemical groups in the molecular precursors. Here, we study the electronic structure of armchair GNRs substitutionally doped with di-boron moieties at the center, through a combination of scanning tunneling spectroscopy, angle-resolved photoe…
▽ More
High quality graphene nanoribbons (GNRs) grown by on-surface synthesis strategies with atomic precision can be controllably doped by inserting heteroatoms or chemical groups in the molecular precursors. Here, we study the electronic structure of armchair GNRs substitutionally doped with di-boron moieties at the center, through a combination of scanning tunneling spectroscopy, angle-resolved photoemission, and density functional theory simulations. Boron atoms appear with a small displacement towards the surface signaling their stronger interaction with the metal. We find two boron-rich flat bands emerging as impurity states inside the GNR band gap, one of them particularly broadened after its hybridization with the gold surface states. In addition, the boron atoms shift the conduction and valence bands of the pristine GNR away from the gap edge, and leave unaffected the bands above and below, which become the new frontier bands and have negligible boron character. This is due to the selective mixing of boron states with GNR bands according to their symmetry. Our results depict that the GNRs band structure can be tuned by modifying the separation between di-boron moieties.
△ Less
Submitted 6 June, 2018;
originally announced June 2018.
-
Width-Dependent Band Gap in Armchair Graphene Nanoribbons Reveals Fermi Level Pinning on Au(111)
Authors:
Néstor Merino-Díez,
Aran Garcia-Lekue,
Eduard Carbonell-Sanromà,
**gcheng Li,
Martina Corso,
Luciano Colazzo,
Francesco Sedona,
Daniel Sánchez-Portal,
Jose I. Pascual,
Dimas G. de Oteyza
Abstract:
We report on the energy level alignment evolution of valence and conduction bands of armchair-oriented graphene nanoribbons (aGNR) as their band gap shrinks with increasing width. We use 4,4-dibromo-para-terphenyl as molecular precursor on Au(111) to form extended poly-para-phenylene nanowires, which can be fused sideways to form atomically precise aGNRs of varying widths. We measure the frontier…
▽ More
We report on the energy level alignment evolution of valence and conduction bands of armchair-oriented graphene nanoribbons (aGNR) as their band gap shrinks with increasing width. We use 4,4-dibromo-para-terphenyl as molecular precursor on Au(111) to form extended poly-para-phenylene nanowires, which can be fused sideways to form atomically precise aGNRs of varying widths. We measure the frontier bands by means of scanning tunneling spectroscopy, corroborating that the nanoribbons band gap is inversely proportional to their width. Interestingly, valence bands are found to show Fermi level pinning as the band gap decreases below a threshold value around 1.7 eV. Such behavior is of critical importance to understand the properties of potential contacts in graphene nanoribbon-based devices. Our measurements further reveal a particularly interesting system for studying Fermi level pinning by modifying an adsorbates band gap while maintaining an almost unchanged interface chemistry defined by substrate and adsorbate.
△ Less
Submitted 18 December, 2017;
originally announced December 2017.
-
Orbital-selective spin excitation of a magnetic porphyrin
Authors:
Carmen Rubio-Verdú,
Ane Sarasola,
Deung-Jang Choi,
Zsolt Majzik,
René Ebeling,
M. Reyes Calvo,
Miguel M. Ugeda,
Aran Garcia-Lekue,
Daniel Sánchez-Portal,
José Ignacio Pascual
Abstract:
Scattering of electrons by localized spins is the ultimate process enabling electrical detection and control of the magnetic state of a spin-doped material. At the molecular scale, this scattering is mediated by the electronic orbitals hosting the spin. Here we report the selective excitation of a molecular spin by electrons tunneling through different molecular orbitals. Spatially-resolved tunnel…
▽ More
Scattering of electrons by localized spins is the ultimate process enabling electrical detection and control of the magnetic state of a spin-doped material. At the molecular scale, this scattering is mediated by the electronic orbitals hosting the spin. Here we report the selective excitation of a molecular spin by electrons tunneling through different molecular orbitals. Spatially-resolved tunneling spectra on iron porphyrins on Au(111) reveal that the inelastic spin excitation extends beyond the iron site. The inelastic features also change shape and symmetry along the molecule. Combining DFT simulations with a phenomenological scattering model, we show that the extension and lineshape variations of the inelastic signal are due to excitation pathways assisted by different frontier orbitals, each of them with a different degree of hybridization with the surface. By selecting the intramolecular site for electron injection, the relative weight of iron and pyrrole orbitals in the tunneling process is modified. In this way, the spin excitation mechanism, reflected by its spectral lineshape, changes depending on the degree of localization and energy alignment of the chosen molecular orbital.
△ Less
Submitted 29 January, 2018; v1 submitted 3 August, 2017;
originally announced August 2017.
-
Do** of Graphene Nanoribbons via Functional Group Edge Modification
Authors:
Eduard Carbonell-Sanromà,
Jeremy Hieulle,
Manuel Vilas-Varela,
Pedro Brandimarte,
Mikel Iraola,
Ana Barragán,
**gcheng Li,
Mikel Abadia,
Martina Corso,
Daniel Sánchez-Portal,
Diego Peña,
Jose Ignacio Pascual
Abstract:
We report on the on-surface synthesis of 7 armchair graphene nanoribbons (7-AGNRs) substituted with nitrile (CN) functional groups. The CN groups are attached to the GNR backbone by modifying the 7-AGNR precursor. While many of these groups survive the on-surface synthesis, the reaction process causes the cleavage of some CN from the ribbon backbone and the on-surface cycloisomerization of few nit…
▽ More
We report on the on-surface synthesis of 7 armchair graphene nanoribbons (7-AGNRs) substituted with nitrile (CN) functional groups. The CN groups are attached to the GNR backbone by modifying the 7-AGNR precursor. While many of these groups survive the on-surface synthesis, the reaction process causes the cleavage of some CN from the ribbon backbone and the on-surface cycloisomerization of few nitriles onto pyridine rings. Scanning Tunneling Spectroscopy and Density Functional Theory reveal that CN groups behave as very efficient n-dopants, significantly downshifting the bands of the ribbon, and introducing deep impurity levels associated to the nitrogen electron lone pairs.
△ Less
Submitted 19 May, 2017;
originally announced May 2017.
-
A tunable electronic beam splitter realized with crossed graphene nanoribbons
Authors:
Pedro Brandimarte,
Mads Engelund,
Nick Papior,
Aran Garcia-Lekue,
Thomas Frederiksen,
Daniel Sánchez-Portal
Abstract:
Graphene nanoribbons (GNRs) are promising components in future nanoelectronics due to the large mobility of graphene electrons and their tunable electronic band gap in combination with recent experimental developments of on-surface chemistry strategies for their growth. Here we explore a prototype 4-terminal semiconducting device formed by two crossed armchair GNRs (AGNRs) using state-of-the-art f…
▽ More
Graphene nanoribbons (GNRs) are promising components in future nanoelectronics due to the large mobility of graphene electrons and their tunable electronic band gap in combination with recent experimental developments of on-surface chemistry strategies for their growth. Here we explore a prototype 4-terminal semiconducting device formed by two crossed armchair GNRs (AGNRs) using state-of-the-art first-principles transport methods. We analyze in detail the roles of intersection angle, stacking order, inter-GNR separation, and finite voltages on the transport characteristics. Interestingly, when the AGNRs intersect at $θ= 60^\circ$, electrons injected from one terminal can be split into two outgoing waves with a tunable ratio around 50% and with almost negligible back-reflection. The splitted electron wave is found to propagate partly straight across the intersection region in one ribbon and partly in one direction of the other ribbon, i.e., in analogy of an optical beam splitter. Our simulations further identify realistic conditions for which this semiconducting device can act as a mechanically controllable electronic beam splitter with possible applications in carbon-based quantum electronic circuits and electron optics. We rationalize our findings with a simple model that suggests that electronic beam splitters can generally be realized with crossed GNRs.
△ Less
Submitted 10 November, 2016;
originally announced November 2016.
-
Charge transfer states at the interface of the pentacene monolayer on TiO$_2$ and their influence on the optical spectrum
Authors:
M. P. Ljungberg,
O. Vänskä,
P. Koval,
S. W. Koch,
M. Kira,
D. Sánchez-Portal
Abstract:
The full monolayer of pentacene adsorbed on rutile TiO$_2$(110) provides an intriguing model to study charge-transfer excitations where the optically excited electrons and holes reside on different sides of the internal interface between the pentacene monolayer and the TiO$_2$ surface. In this work we investigate the electronic properties of this system with density functional theory, and compute…
▽ More
The full monolayer of pentacene adsorbed on rutile TiO$_2$(110) provides an intriguing model to study charge-transfer excitations where the optically excited electrons and holes reside on different sides of the internal interface between the pentacene monolayer and the TiO$_2$ surface. In this work we investigate the electronic properties of this system with density functional theory, and compute its excitonic and optical properties making use of \emph{ab initio} matrix elements. The pentacene molecules are found to lie flat on the surface, head to tail, and slightly tilted towards the troughs of the oxygen rows of the surface --- in agreement with experiment. Molecular states appear in the band gap of the clean TiO$_2$ surface which enable charge transfer excitations directly from the molecular HOMO to the TiO$_2$ conduction band. The calculated optical spectrum shows a strong polarization dependence and displays excitonic resonances corresponding to the charge-transfer states. We characterize the computed excitons by their symmetry and location in k-space and use this information to explain the polarization dependence of the optical spectrum.
△ Less
Submitted 6 October, 2016;
originally announced October 2016.
-
Structural and Vibrational Properties of the TiOPc monolayer on Ag(111)
Authors:
Laura Fernandez,
Sebastian Thussing,
Alexander Mänz,
Gregor Witte,
Anton X. Brion-Rios,
Pepa Cabrera-Sanfelix,
Daniel Sanchez-Portal,
Peter Jakob
Abstract:
The evolution of titanyl-phthalocyanine (TiOPc) thin films on Ag(111) has been investigated using IRAS, SPA-LEED and STM. In the (sub)monolayer regime various phases are observed that can be assigned to a 2D gas, a commensurate and a point-on-line phase. In all three phases the non-planar TiOPc molecule is adsorbed on Ag(111) in an oxygen-up configuration with the molecular pi-conjugated backbone…
▽ More
The evolution of titanyl-phthalocyanine (TiOPc) thin films on Ag(111) has been investigated using IRAS, SPA-LEED and STM. In the (sub)monolayer regime various phases are observed that can be assigned to a 2D gas, a commensurate and a point-on-line phase. In all three phases the non-planar TiOPc molecule is adsorbed on Ag(111) in an oxygen-up configuration with the molecular pi-conjugated backbone oriented parallel to the surface. The commensurate phase reveals a high packing density, containing two molecules at inequivalent adsorption sites within the unit cell. Both molecules assume different azimuthal orientations which is ascribed to preferred sites and azimuthal orientations with respect to the Ag(111) substrate and, to a lesser extent, to a minimization of repulsive Pauli interactions between adjacent molecules at short distances. At full saturation of the monolayer the latter interaction becomes dominant and the commensurate long range order is lost. DFT calculations have been used to study different adsorption geometries of TiOPc on Ag(111). The most stable configurations among those with pointing up oxygen atoms (bridge+, bridgex, topx) seem to correspond to those identified experimentally. The calculated dependence of the electronic structure and molecular dipole on the adsorption site and configuration is found to be rather small.
△ Less
Submitted 28 September, 2016;
originally announced September 2016.
-
Search for a Metallic Dangling-Bond Wire on $n$-doped H-passivated Semiconductor Surfaces
Authors:
Mads Engelund,
Nick Papior,
Pedro Brandimarte,
Thomas Frederiksen,
Aran Garcia-Lekue,
Daniel Sanchez-Portal
Abstract:
We have theoretically investigated the electronic properties of neutral and $n$-doped dangling bond (DB) quasi-one-dimensional structures (lines) in the Si(001):H and Ge(001):H substrates with the aim of identifying atomic-scale interconnects exhibiting metallic conduction for use in on-surface circuitry. Whether neutral or doped, DB lines are prone to suffer geometrical distortions or have magnet…
▽ More
We have theoretically investigated the electronic properties of neutral and $n$-doped dangling bond (DB) quasi-one-dimensional structures (lines) in the Si(001):H and Ge(001):H substrates with the aim of identifying atomic-scale interconnects exhibiting metallic conduction for use in on-surface circuitry. Whether neutral or doped, DB lines are prone to suffer geometrical distortions or have magnetic ground-states that render them semiconducting. However, from our study we have identified one exception -- a dimer row fully stripped of hydrogen passivation. Such a DB-dimer line shows an electronic band structure which is remarkably insensitive to the do** level and, thus, it is possible to manipulate the position of the Fermi level, moving it away from the gap. Transport calculations demonstrate that the metallic conduction in the DB-dimer line can survive thermally induced disorder, but is more sensitive to imperfect patterning. In conclusion, the DB-dimer line shows remarkable stability to do** and could serve as a one-dimensional metallic conductor on $n$-doped samples.
△ Less
Submitted 13 September, 2016;
originally announced September 2016.
-
Adsorption geometry and the interface states: The relaxed and compressed phases of NTCDA/Ag(111)
Authors:
P. Jakob,
N. L. Zaitsev,
A. Namgalies,
R. Tonner,
I. A. Nechaev,
F. S. Tautz,
U. Höfer,
D. Sanchez-Portal
Abstract:
The theoretical modelling of metal-organic interfaces represents a formidable challenge, especially in consideration of the delicate balance of various interaction mechanisms and the large size of involved molecular species. In the present study, the energies of interface states, which are known to display a high sensitivity to the adsorption geometry and electronic structure of the deposited mole…
▽ More
The theoretical modelling of metal-organic interfaces represents a formidable challenge, especially in consideration of the delicate balance of various interaction mechanisms and the large size of involved molecular species. In the present study, the energies of interface states, which are known to display a high sensitivity to the adsorption geometry and electronic structure of the deposited molecular species, have been used to test the suitability and reliability of current theoretical approaches. Two well-ordered overlayer structures (relaxed and compressed monolayer) of NTCDA on Ag(111) have been investigated using two-photon-photoemission to derive precise interface state energies for these closely related systems. The experimental values are reproduced by our DFT calculations using different treatments of dispersion interactions (optB88, PBE-D3) and basis set approaches (localized numerical atomic orbitals, plane waves) with remarkable accuracy. This underlines the trustworthiness regarding the description of geometric and electronic properties.
△ Less
Submitted 9 September, 2016; v1 submitted 3 August, 2016;
originally announced August 2016.
-
Hybrid cluster-expansion and density-functional-theory approach for optical absorption in TiO2
Authors:
O. Vänskä,
M. Ljungberg,
P. Springer,
D. Sánchez-Portal,
M. Kira,
S. W. Koch
Abstract:
A combined approach of first-principles density-functional calculations and the systematic cluster-expansion scheme is presented. The dipole, quadrupole, and Coulomb matrix elements obtained from ab initio calculations are used as an input to the microscopic many-body theory of the excitonic optical response. To demonstrate the hybrid approach for a nontrivial semiconductor system, the near-bandga…
▽ More
A combined approach of first-principles density-functional calculations and the systematic cluster-expansion scheme is presented. The dipole, quadrupole, and Coulomb matrix elements obtained from ab initio calculations are used as an input to the microscopic many-body theory of the excitonic optical response. To demonstrate the hybrid approach for a nontrivial semiconductor system, the near-bandgap excitonic optical absorption of rutile TiO2 is computed. Comparison with experiments yields strong evidence that the observed near-bandgap features are due to a dipole-forbidden but quadrupole-allowed 1s-exciton state.
△ Less
Submitted 16 December, 2015;
originally announced December 2015.
-
Optical response of silver clusters and their hollow shells from Linear-Response TDDFT
Authors:
Peter Koval,
Federico Marchesin,
Dietrich Foerster,
Daniel Sánchez-Portal
Abstract:
We present a study of the optical response of compact and hollow icosahedral clusters containing up to 868 silver atoms by means of time-dependent density functional theory. We have studied the dependence on size and morphology of both the sharp plasmonic resonance at 3-4 eV (originated mainly from $sp$-electrons), and the less studied broader feature appearing in the 6-7 eV range (interband trans…
▽ More
We present a study of the optical response of compact and hollow icosahedral clusters containing up to 868 silver atoms by means of time-dependent density functional theory. We have studied the dependence on size and morphology of both the sharp plasmonic resonance at 3-4 eV (originated mainly from $sp$-electrons), and the less studied broader feature appearing in the 6-7 eV range (interband transitions). An analysis of the effect of structural relaxations, as well as the choice of exchange correlation functional (local density versus generalized gradient approximations) both in the ground state and optical response calculations is also presented. We have further analysed the role of the different atom layers (surface versus inner layers) and the different orbital symmetries on the absorption cross-section for energies up to 8 eV. We have also studied the dependence on the number of atom layers in hollow structures. Shells formed by a single layer of atoms show a pronounced red shift of the main plasmon resonances that, however, rapidly converge to those of the compact structures as the number of layers is increased. The methods used to obtain these results are also carefully discussed. Our methodology is based on the use of localized basis (atomic orbitals, and atom-centered- and dominant- product functions), which bring several computational advantages related to their relatively small size and the sparsity of the resulting matrices. Furthermore, the use of basis sets of atomic orbitals also brings the possibility to extend some of the standard population analysis tools (e.g., Mulliken population analysis) to the realm of optical excitations. Some examples of these analyses are described in the present work.
△ Less
Submitted 12 February, 2016; v1 submitted 7 December, 2015;
originally announced December 2015.
-
Optical response of metallic nanojunctions driven by single atom motion
Authors:
Federico Marchesin,
Peter Koval,
Marc Barbry,
Javier Aizpurua,
Daniel Sanchez-Portal
Abstract:
The correlation between transport properties across sub-nanometric metallic gaps and the optical response of the system is a complex effect which is determined by the fine atomic-scale details of the junction structure. As experimental advances are progressively accessing transport and optical characterization of smaller nanojunctions, a clear connection between the structural, electronic and opti…
▽ More
The correlation between transport properties across sub-nanometric metallic gaps and the optical response of the system is a complex effect which is determined by the fine atomic-scale details of the junction structure. As experimental advances are progressively accessing transport and optical characterization of smaller nanojunctions, a clear connection between the structural, electronic and optical properties in these nanocavities is needed. Using ab initio calculations, we present here a study of the simultaneous evolution of the structure and the optical response of a plasmonic junction as the particles forming the cavity, two Na$_{380}$ clusters, approach and retract. Atomic reorganizations are responsible for a large hysteresis of the plasmonic response of the system, that shows a jump-to-contact instability during the approach process and the formation of an atom-sized neck across the junction during retraction. Our calculations demonstrate that, due to the quantization of the conductance in metal nanocontacts, atomic-scale reconfigurations play a crucial role in determining the optical response of the whole system. We observe abrupt changes in the intensities and spectral positions of the dominating plasmon resonances, and find a one-to-one correspondence between these jumps and those of the quantized transport as the neck cross-section diminishes. These results point out to an unforeseen connection between transport and optics at the atomic scale, which is at the frontier of current optoelectronics and can drive new options in optical engineering of signals driven by the motion and manipulation of single atoms.
△ Less
Submitted 23 September, 2015;
originally announced September 2015.
-
Cubic-scaling iterative solution of the Bethe-Salpeter equation for finite systems
Authors:
Mathias P. Ljungberg,
Peter Koval,
Francesco Ferrari,
Dietrich Foerster,
Daniel Sanchez-Portal
Abstract:
The Bethe-Salpeter equation (BSE) is currently the state of the art in the description of neutral electron excitations in both solids and large finite systems. It is capable of accurately treating charge-transfer excitations that present difficulties for simpler approaches. We present a local basis set formulation of the BSE for molecules where the optical spectrum is computed with the iterative H…
▽ More
The Bethe-Salpeter equation (BSE) is currently the state of the art in the description of neutral electron excitations in both solids and large finite systems. It is capable of accurately treating charge-transfer excitations that present difficulties for simpler approaches. We present a local basis set formulation of the BSE for molecules where the optical spectrum is computed with the iterative Haydock recursion scheme, leading to a low computational complexity and memory footprint. Using a variant of the algorithm we can go beyond the Tamm-Dancoff approximation (TDA). We rederive the recursion relations for general matrix elements of a resolvent, show how they translate into continued fractions, and study the convergence of the method with the number of recursion coefficients and the role of different terminators. Due to the locality of the basis functions the computational cost of each iteration scales asymptotically as $O(N^3)$ with the number of atoms, while the number of iterations is typically much lower than the size of the underlying electron-hole basis. In practice we see that , even for systems with thousands of orbitals, the runtime will be dominated by the $O(N^2)$ operation of applying the Coulomb kernel in the atomic orbital representation
△ Less
Submitted 20 May, 2015;
originally announced May 2015.
-
Susbtrate-Induced Stabilization and Reconstruction of Zigzag Edges in Graphene Nanoislands on Ni(111)
Authors:
A. Garcia-Lekue,
M. Olle,
D. Sanchez-Portal,
J. J. Palacios,
A. Mugarza,
G. Ceballos,
P. Gambardella
Abstract:
We combine experimental observations by scanning tunneling microscopy (STM) and density functional theory (DFT) to reveal the most stable edge structures of graphene on Ni(111) as well as the role of stacking-driven activation and suppression of edge reconstruction. Depending on the position of the outermost carbon atoms relative to hollow and on-top Ni sites, zigzag edges have very different ener…
▽ More
We combine experimental observations by scanning tunneling microscopy (STM) and density functional theory (DFT) to reveal the most stable edge structures of graphene on Ni(111) as well as the role of stacking-driven activation and suppression of edge reconstruction. Depending on the position of the outermost carbon atoms relative to hollow and on-top Ni sites, zigzag edges have very different energies. Triangular graphene nanoislands are exclusively bound by the more stable zigzag hollow edges. In hexagonal nanoislands, which are constrained by geometry to alternate zigzag hollow and zigzag top edges along their perimeter, only the hollow edge is stable whereas the top edges spontaneously reconstruct into the (57) pentagon-heptagon structure. Atomically-resolved STM images are consistent with either top-fcc or top-hcp epitaxial stacking of graphene and Ni sites, with the former being favored by DFT. Finally, we find that there is a one-to-one relationship between the edge type, graphene stacking, and orientation of the graphene islands.
△ Less
Submitted 3 February, 2015;
originally announced February 2015.
-
On the Mechanical and Electronic Properties of Thiolated Gold Nanocrystals
Authors:
K. Smaali,
S. Desbief,
G. Foti,
T. Frederiksen,
D. Sanchez-Portal,
A. Arnau,
J. P. Nys,
P. Leclere,
D. Vuillaume,
N. Clement
Abstract:
We present a quantitative exploration, combining experiment and simulation, of the mechanical and electronic properties, as well as the modifications induced by an alkylthiolated coating, at the single NP level. We determine the response of the NPs to external pressure in a controlled manner by using an atomic force microscope tip. We find a strong reduction of their Young modulus, as compared to…
▽ More
We present a quantitative exploration, combining experiment and simulation, of the mechanical and electronic properties, as well as the modifications induced by an alkylthiolated coating, at the single NP level. We determine the response of the NPs to external pressure in a controlled manner by using an atomic force microscope tip. We find a strong reduction of their Young modulus, as compared to bulk gold, and a significant influence of strain in the electronic properties of the alkylthiolated NPs. Electron transport measurements of tiny molecular junctions (NP/alkylthiol/CAFM tip) show that the effective tunnelling barrier through the adsorbed monolayer strongly decreases with increasing the applied load, which translates in a remarkable and unprecedented increase of the tunnel current. These observations are successfully explained using simulations based on finite element analysis (FEA) and first-principles calculations that permit to consider the coupling between the mechanical response of the system and the electric dipole variations at the interface.
△ Less
Submitted 24 December, 2014;
originally announced December 2014.
-
Electronic stop** power in a narrow band gap semiconductor from first principles
Authors:
Rafi Ullah,
Fabiano Corsetti,
Daniel Sánchez-Portal,
Emilio Artacho
Abstract:
The direction and impact parameter dependence of electronic stop** power, along with its velocity threshold behavior, is investigated in a prototypical small band gap semiconductor. We calculate the electronic stop** power of H in Ge, a semiconductor with relatively low packing density, using time-evolving time-dependent density-functional theory. The calculations are carried out in channeling…
▽ More
The direction and impact parameter dependence of electronic stop** power, along with its velocity threshold behavior, is investigated in a prototypical small band gap semiconductor. We calculate the electronic stop** power of H in Ge, a semiconductor with relatively low packing density, using time-evolving time-dependent density-functional theory. The calculations are carried out in channeling conditions with different impact parameters and in different crystal directions, for projectile velocities ranging from 0.05 to 0.6 atomic units. The satisfactory comparison with available experiments supports the results and conclusions beyond experimental reach. The calculated electronic stop** power is found to be different in different crystal directions; however, strong impact parameter dependence is observed only in one of these directions. The distinct velocity threshold observed in experiments is well reproduced, and its non-trivial relation with the band gap follows a perturbation theory argument surprisingly well. This simple model is also successful in explaining why different density functionals give the same threshold even with substantially different band gaps.
△ Less
Submitted 17 March, 2015; v1 submitted 24 October, 2014;
originally announced October 2014.
-
Resonant Lifetime of Core-Excited Organic Adsorbates from First Principles
Authors:
Guido Fratesi,
Carlo Motta,
Maria Italo Trioni,
Gian Paolo Brivio,
Daniel Sanchez-Portal
Abstract:
We investigate by first-principles simulations the resonant electron-transfer lifetime from the excited state of an organic adsorbate to a semiconductor surface, namely isonicotinic acid on rutile TiO$_2$(110). The molecule-substrate interaction is described using density functional theory, while the effect of a truly semi-infinite substrate is taken into account by Green's function techniques. Ex…
▽ More
We investigate by first-principles simulations the resonant electron-transfer lifetime from the excited state of an organic adsorbate to a semiconductor surface, namely isonicotinic acid on rutile TiO$_2$(110). The molecule-substrate interaction is described using density functional theory, while the effect of a truly semi-infinite substrate is taken into account by Green's function techniques. Excitonic effects due to the presence of core-excited atoms in the molecule are shown to be instrumental to understand the electron-transfer times measured using the so-called core-hole-clock technique. In particular, for the isonicotinic acid on TiO$_2$(110), we find that the charge injection from the LUMO is quenched since this state lies within the substrate band gap. We compute the resonant charge-transfer times from LUMO+1 and LUMO+2, and systematically investigate the dependence of the elastic lifetimes of these states on the alignment among adsorbate and substrate states.
△ Less
Submitted 22 April, 2014;
originally announced April 2014.
-
Fully self-consistent $GW$ and quasi-particle self-consistent $GW$ for molecules
Authors:
Peter Koval,
Dietrich Foerster,
Daniel Sánchez-Portal
Abstract:
Two self-consistent schemes involving Hedin's $GW$ approximation are studied for a set of sixteen different atoms and small molecules. We compare results from the fully self-consistent $GW$ approximation (SC$GW$) and the quasi-particle self-consistent $GW$ approximation (QS$GW$) within the same numerical framework. Core and valence electrons are treated on an equal footing in all the steps of the…
▽ More
Two self-consistent schemes involving Hedin's $GW$ approximation are studied for a set of sixteen different atoms and small molecules. We compare results from the fully self-consistent $GW$ approximation (SC$GW$) and the quasi-particle self-consistent $GW$ approximation (QS$GW$) within the same numerical framework. Core and valence electrons are treated on an equal footing in all the steps of the calculation. We use basis sets of localized functions to handle the space dependence of quantities and spectral functions to deal with their frequency dependence. We compare SC$GW$ and QS$GW$ on a qualitative level by comparing the computed densities of states (DOS). To judge their relative merit on a quantitative level, we compare their vertical ionization potentials (IPs) with those obtained from coupled-cluster calculations CCSD(T). Our results are futher compared with "one-shot" $G_0W_0$ calculations starting from Hartree-Fock solutions ($G_0W_0$-HF). Both self-consistent $GW$ approaches behave quite similarly. Averaging over all the studied molecules, both methods show only a small improvement (somewhat larger for SC$GW$) of the calculated IPs with respect to $G_0W_0$-HF results. Interestingly, SC$GW$ and QS$GW$ calculations tend to deviate in opposite directions with respect to CCSD(T) results. SC$GW$ systematically underestimates the IPs, while QS$GW$ tends to overestimate them. $G_0W_0$-HF produces results which are surprisingly close to QS$GW$ calculations both for the DOS and for the numerical values of the IPs.
△ Less
Submitted 7 April, 2014;
originally announced April 2014.
-
First-Principles Study of the Electronic and Magnetic Properties of Defects in Carbon Nanostructures
Authors:
Elton J. G. Santos,
Andres Ayuela,
Daniel Sanchez-Portal
Abstract:
Understanding the magnetic properties of graphenic nanostructures is instrumental in future spintronics applications. These magnetic properties are known to depend crucially on the presence of defects. Here we review our recent theoretical studies using density functional calculations on two types of defects in carbon nanostructures: Substitutional do** with transition metals, and sp$^3$-type de…
▽ More
Understanding the magnetic properties of graphenic nanostructures is instrumental in future spintronics applications. These magnetic properties are known to depend crucially on the presence of defects. Here we review our recent theoretical studies using density functional calculations on two types of defects in carbon nanostructures: Substitutional do** with transition metals, and sp$^3$-type defects created by covalent functionalization with organic and inorganic molecules. We focus on such defects because they can be used to create and control magnetism in graphene-based materials. Our main results are summarized as follows: i)Substitutional metal impurities are fully understood using a model based on the hybridization between the $d$ states of the metal atom and the defect levels associated with an unreconstructed D$_{3h}$ carbon vacancy. We identify three different regimes, associated with the occupation of distinct hybridization levels, which determine the magnetic properties obtained with this type of do**; ii) A spin moment of 1.0 $μ_B$ is always induced by chemical functionalization when a molecule chemisorbs on a graphene layer via a single C-C (or other weakly polar) covalent bond. The magnetic coupling between adsorbates shows a key dependence on the sublattice adsorption site. This effect is similar to that of H adsorption, however, with universal character; iii) The spin moment of substitutional metal impurities can be controlled using strain. In particular, we show that although Ni substitutionals are non-magnetic in flat and unstrained graphene, the magnetism of these defects can be activated by applying either uniaxial strain or curvature to the graphene layer. All these results provide key information about formation and control of defect-induced magnetism in graphene and related materials.
△ Less
Submitted 1 April, 2013;
originally announced April 2013.
-
Dynamic screening and energy loss of antiprotons colliding with excited Al clusters
Authors:
Natalia E. Koval,
Daniel Sánchez-Portal,
Andrey G. Borisov,
Ricardo Díez Muiño
Abstract:
We use time-dependent density functional theory to calculate the energy loss of an antiproton colliding with a small Al cluster previously excited. The velocity of the antiproton is such that non-linear effects in the electronic response of the Al cluster are relevant. We obtain that an antiproton penetrating an excited cluster transfers less energy to the cluster than an antiproton penetrating a…
▽ More
We use time-dependent density functional theory to calculate the energy loss of an antiproton colliding with a small Al cluster previously excited. The velocity of the antiproton is such that non-linear effects in the electronic response of the Al cluster are relevant. We obtain that an antiproton penetrating an excited cluster transfers less energy to the cluster than an antiproton penetrating a ground state cluster. We quantify this difference and analyze it in terms of the cluster excitation spectrum.
△ Less
Submitted 28 January, 2013;
originally announced January 2013.
-
Electronic stop** power in gold: The role of d electrons and the H/He anomaly
Authors:
M. Ahsan Zeb,
J. Kohanoff,
D. Sanchez-Portal,
A. Arnau,
J. I. Juaristi,
Emilio Artacho
Abstract:
The electronic stop** power of H and He moving through gold is obtained to high accuracy using time-evolving density-functional theory, thereby bringing usual first-principles accuracies into this kind of strongly coupled, continuum non-adiabatic processes in condensed matter. The two key unexplained features of what observed experimentally have been reproduced and understood: (i) The non-linear…
▽ More
The electronic stop** power of H and He moving through gold is obtained to high accuracy using time-evolving density-functional theory, thereby bringing usual first-principles accuracies into this kind of strongly coupled, continuum non-adiabatic processes in condensed matter. The two key unexplained features of what observed experimentally have been reproduced and understood: (i) The non-linear behaviour of stop** power versus velocity is a gradual crossover as excitations tail into the d-electron spectrum; and (ii) the low-velocity H/He anomaly (the relative stop** powers are contrary to established theory) is explained by the substantial involvement of the d electrons in the screening of the projectile even at the lowest velocities where the energy loss is generated by s-like electron-hole pair formation only.
△ Less
Submitted 8 May, 2012;
originally announced May 2012.
-
Dynamic screening of a localized hole during photoemission from a metal cluster
Authors:
N. E. Koval,
D. Sánchez-Portal,
A. G. Borisov,
R. Díez Muiño
Abstract:
Recent advances in attosecond spectroscopy techniques have fueled the interest in the theoretical description of electronic processes taking place in the subfemtosecond time scale. Here we study the coupled dynamic screening of a localized hole and a photoelectron emitted from a metal cluster using a semi-classical model. Electron density dynamics in the cluster is calculated with Time-Dependent D…
▽ More
Recent advances in attosecond spectroscopy techniques have fueled the interest in the theoretical description of electronic processes taking place in the subfemtosecond time scale. Here we study the coupled dynamic screening of a localized hole and a photoelectron emitted from a metal cluster using a semi-classical model. Electron density dynamics in the cluster is calculated with Time-Dependent Density Functional Theory and the motion of the photoemitted electron is described classically. We show that the dynamic screening of the hole by the cluster electrons affects the motion of the photoemitted electron. At the very beginning of its trajectory, the photoemitted electron interacts with the cluster electrons that pile up to screen the hole. Within our model, this gives rise to a significant reduction of the energy lost by the photoelectron. Thus, this is a velocity dependent effect that should be accounted for when calculating the average losses suffered by photoemitted electrons in metals.
△ Less
Submitted 14 June, 2012; v1 submitted 22 March, 2012;
originally announced March 2012.
-
Transport properties of armchair graphene nanoribbon junctions between graphene electrodes
Authors:
C. Motta,
D. Sánchez-Portal,
M. I. Trioni
Abstract:
The transmission properties of armchair graphene nanoribbon junctions between graphene electrodes are investigated by means of first-principles quantum transport calculations. First the dependence of the transmission function on the size of the nanoribbon has been studied. Two regimes are highlighted: for small applied bias transport takes place via tunneling and the length of the ribbon is the ke…
▽ More
The transmission properties of armchair graphene nanoribbon junctions between graphene electrodes are investigated by means of first-principles quantum transport calculations. First the dependence of the transmission function on the size of the nanoribbon has been studied. Two regimes are highlighted: for small applied bias transport takes place via tunneling and the length of the ribbon is the key parameter that determines the junction conductance; at higher applied bias resonant transport through HOMO and LUMO starts to play a more determinant role, and the transport properties depend on the details of the geometry (width and length) of the carbon nanoribbon. In the case of the thinnest ribbon it has been verified that a tilted geometry of the central phenyl ring is the most stable configuration. As a consequence of this rotation the conductance decreases due to the misalignment of the $pi$ orbitals between the phenyl ring and the remaining part of the junction. All the computed transmission functions have shown a negligible dependence on different saturations and reconstructions of the edges of the graphene leads, suggesting a general validity of the reported results.
△ Less
Submitted 9 March, 2012;
originally announced March 2012.
-
Universal Magnetic Properties of sp$^3$-type Defects in Covalently Functionalized Graphene
Authors:
Elton J. G. Santos,
Andrés Ayuela,
Daniel Sánchez-Portal
Abstract:
Using density-functional calculations, we study the effect of sp$^3$-type defects created by different covalent functionalizations on the electronic and magnetic properties of graphene. We find that the induced magnetic properties are {\it universal}, in the sense that they are largely independent on the particular adsorbates considered. When a weakly-polar single covalent bond is established with…
▽ More
Using density-functional calculations, we study the effect of sp$^3$-type defects created by different covalent functionalizations on the electronic and magnetic properties of graphene. We find that the induced magnetic properties are {\it universal}, in the sense that they are largely independent on the particular adsorbates considered. When a weakly-polar single covalent bond is established with the layer, a local spin-moment of 1.0 $μ_B$ always appears in graphene. This effect is similar to that of H adsorption, which saturates one $p_z$ orbital in the carbon layer. The magnetic couplings between the adsorbates show a strong dependence on the graphene sublattice of chemisorption. Molecules adsorbed at the same sublattice couple ferromagnetically, with an exchange interaction that decays very slowly with distance, while no magnetism is found for adsorbates at opposite sublattices. Similar magnetic properties are obtained if several $p_z$ orbitals are saturated simultaneously by the adsorption of a large molecule. These results might open new routes to engineer the magnetic properties of graphene derivatives by chemical means.
△ Less
Submitted 25 January, 2012;
originally announced January 2012.
-
Strain-Tunable Spin Moment in Ni-Doped Graphene
Authors:
Elton J. G. Santos,
Andrés Ayuela,
Daniel Sánchez-Portal
Abstract:
Graphene, due to its exceptional properties, is a promising material for nanotechnology applications. In this context, the ability to tune the properties of graphene-based materials and devices with the incorporation of defects and impurities can be of extraordinary importance. Here we investigate the effect of uniaxial tensile strain on the electronic and magnetic properties of graphene doped wit…
▽ More
Graphene, due to its exceptional properties, is a promising material for nanotechnology applications. In this context, the ability to tune the properties of graphene-based materials and devices with the incorporation of defects and impurities can be of extraordinary importance. Here we investigate the effect of uniaxial tensile strain on the electronic and magnetic properties of graphene doped with substitutional Ni impurities (Ni_sub). We have found that, although Ni_sub defects are non-magnetic in the relaxed layer, uniaxial strain induces a spin moment in the system. The spin moment increases with the applied strain up to values of 0.3-0.4 μ_B per Ni_sub, until a critical strain of ~6.5% is reached. At this point, a sharp transition to a high-spin state (~1.9 μ_B) is observed. This magnetoelastic effect could be utilized to design strain-tunable spin devices based on Ni-doped graphene.
△ Less
Submitted 3 December, 2011;
originally announced December 2011.
-
An O(N^3) implementation of Hedin's GW approximation
Authors:
Peter Koval,
Dietrich Foerster,
Daniel Sanchez-Portal
Abstract:
Organic electronics is a rapidly develo** technology. Typically, the molecules involved in organic electronics are made up of hundreds of atoms, prohibiting a theoretical description by wavefunction-based ab-initio methods. Density-functional and Green's function type of methods scale less steeply with the number of atoms. Therefore, they provide a suitable framework for the theory of such large…
▽ More
Organic electronics is a rapidly develo** technology. Typically, the molecules involved in organic electronics are made up of hundreds of atoms, prohibiting a theoretical description by wavefunction-based ab-initio methods. Density-functional and Green's function type of methods scale less steeply with the number of atoms. Therefore, they provide a suitable framework for the theory of such large systems.
In this contribution, we describe an implementation, for molecules, of Hedin's GW approximation. The latter is the lowest order solution of a set of coupled integral equations for electronic Green's and vertex functions that was found by Lars Hedin half a century ago.
Our implementation of Hedin's GW approximation has two distinctive features: i) it uses sets of localized functions to describe the spatial dependence of correlation functions, and ii) it uses spectral functions to treat their frequency dependence. Using these features, we were able to achieve a favorable computational complexity of this approximation. In our implementation, the number of operations grows as N^3 with the number of atoms N.
△ Less
Submitted 17 May, 2011;
originally announced May 2011.
-
Magnetism of Covalently Functionalized Carbon Nanotubes
Authors:
Elton J. G. Santos,
D. Sanchez-Portal,
A. Ayuela
Abstract:
We investigate the electronic structure of carbon nanotubes functionalized by adsorbates anchored with single C-C covalent bonds. We find that, despite the particular adsorbate, a spin moment with a universal value of 1.0 $μ_B$ per molecule is induced at low coverage. Therefore, we propose a mechanism of bonding-induced magnetism at the carbon surface. The adsorption of a single molecule creates a…
▽ More
We investigate the electronic structure of carbon nanotubes functionalized by adsorbates anchored with single C-C covalent bonds. We find that, despite the particular adsorbate, a spin moment with a universal value of 1.0 $μ_B$ per molecule is induced at low coverage. Therefore, we propose a mechanism of bonding-induced magnetism at the carbon surface. The adsorption of a single molecule creates a dispersionless defect state at the Fermi energy, which is mainly localized in the carbon wall and presents a small contribution from the adsorbate. This universal spin moment is fairly independent of the coverage as long as all the molecules occupy the same graphenic sublattice. The magnetic coupling between adsorbates is also studied and reveals a key dependence on the graphenic sublattice adsorption site.
△ Less
Submitted 16 August, 2011; v1 submitted 15 April, 2011;
originally announced April 2011.
-
Simulation of inelastic electron tunneling spectroscopy of single molecules with functionalized tips
Authors:
Aran Garcia-Lekue,
Daniel Sanchez-Portal,
Andres Arnau,
Thomas Frederiksen
Abstract:
The role of the tip in inelastic electron tunneling spectroscopy (IETS) performed with scanning tunneling microscopes (STM) is theoretically addressed via first-principles simulations of vibrational spectra of single carbon monoxide (CO) molecules adsorbed on Cu(111). We show how chemically functionalized STM tips modify the IETS intensity corresponding to adsorbate modes on the sample side. The u…
▽ More
The role of the tip in inelastic electron tunneling spectroscopy (IETS) performed with scanning tunneling microscopes (STM) is theoretically addressed via first-principles simulations of vibrational spectra of single carbon monoxide (CO) molecules adsorbed on Cu(111). We show how chemically functionalized STM tips modify the IETS intensity corresponding to adsorbate modes on the sample side. The underlying propensity rules are explained using symmetry considerations for both the vibrational modes and the molecular orbitals of the tip and sample. This suggests that single-molecule IETS can be optimized by selecting the appropriate tip orbital symmetry.
△ Less
Submitted 22 March, 2011;
originally announced March 2011.
-
An O(N^3) implementation of Hedin's GW approximation for molecules
Authors:
Dietrich Foerster,
Peter Koval,
Daniel Sánchez-Portal
Abstract:
We describe an implementation of Hedin's GW approximation for molecules and clusters, the complexity of which scales as O(N^3) with the number of atoms. Our method is guided by two strategies: i) to respect the locality of the underlying electronic interactions and ii) to avoid the singularities of Green's functions by manipulating, instead, their spectral functions using FFT methods. To take into…
▽ More
We describe an implementation of Hedin's GW approximation for molecules and clusters, the complexity of which scales as O(N^3) with the number of atoms. Our method is guided by two strategies: i) to respect the locality of the underlying electronic interactions and ii) to avoid the singularities of Green's functions by manipulating, instead, their spectral functions using FFT methods. To take into account the locality of the electronic interactions, we use a local basis of atomic orbitals and, also, a local basis in the space of their products. We further compress the screened Coulomb interaction into a space of lower dimensions for speed and to reduce memory requirements. The improved scaling of our method with respect to most of the published methodologies should facilitate GW calculations for large systems. Our implementation is intended as a step forward towards the goal of predicting, prior to their synthesis, the ionization energies and electron affinities of the large molecules that serve as constituents of organic semiconductors.
△ Less
Submitted 18 April, 2011; v1 submitted 11 January, 2011;
originally announced January 2011.
-
Spin-Strain Phase Diagram of Defective Graphene
Authors:
E. J. G. Santos,
S. Riikonen,
D. Sanchez-Portal,
A. Ayuela
Abstract:
Using calculations on defective graphene from first principles, we herein consider the dependence of the properties of the monovacancy of graphene under isotropic strain, with a particular focus on spin moments. At zero strain, the vacancy shows a spin moment of 1.5 $μ_B$ that increases to $\sim$2 $μ_B$ when the graphene is in tension. The changes are more dramatic under compression, in that the v…
▽ More
Using calculations on defective graphene from first principles, we herein consider the dependence of the properties of the monovacancy of graphene under isotropic strain, with a particular focus on spin moments. At zero strain, the vacancy shows a spin moment of 1.5 $μ_B$ that increases to $\sim$2 $μ_B$ when the graphene is in tension. The changes are more dramatic under compression, in that the vacancy becomes non-magnetic when graphene is compressed more than 2%. This transition is linked to changes in the atomic structure that occurs around vacancies, and is associated with the formation of ripples. For compressions slightly greater than 3%, this rippling leads to the formation of a heavily reconstructed vacancy structure that consists of two deformed hexagons and pentagons. Our results suggest that any defect-induced magnetism that occurs in graphene can be controlled by applying a strain, or some other mechanical deformations.
△ Less
Submitted 15 December, 2010;
originally announced December 2010.
-
Substrate-Induced Cooperative Effects in Water Adsorption from Density Functional Calculations
Authors:
Pepa Cabrera-Sanfelix,
M. V. Fernández-Serra,
A. Arnau,
D. Sánchez-Portal
Abstract:
Density Functional Theory calculations are used to investigate the role of substrate-induced cooperative effects on the adsorption of water on a partially oxidized transition metal surface, O(2x2)/Ru(0001). Focussing particularly on the dimer configuration, we analyze the different contributions to its binding energy. A significant reinforcement of the intermolecular hydrogen-bond (H-bond), also s…
▽ More
Density Functional Theory calculations are used to investigate the role of substrate-induced cooperative effects on the adsorption of water on a partially oxidized transition metal surface, O(2x2)/Ru(0001). Focussing particularly on the dimer configuration, we analyze the different contributions to its binding energy. A significant reinforcement of the intermolecular hydrogen-bond (H-bond), also supported by the observed frequency shifts of the vibration modes, is attributed to the polarization of the donor molecule when bonded to the Ru atoms in the substrate. This result is further confirmed by our calculations for a water dimer interacting with a small Ru cluster, which clearly show that the observed effect does not depend critically on fine structural details and/or the presence of co-adsorbates. Interestingly, the cooperative reinforcement of the H-bond is suppressed when the acceptor molecule, instead of the donor, is bonded to the surface. This simple observation can be used to rationalize the relative stability of different condensed structures of water on metallic substrates.
△ Less
Submitted 6 September, 2010;
originally announced September 2010.
-
First-principles investigation of electron-induced cross-linking of aromatic self-assembled monolayers on Au(111)
Authors:
Pepa Cabrera-Sanfelix,
Andrés Arnau,
Daniel Sánchez-Portal
Abstract:
We have performed a density functional theory study of the possible layered geometries occurring after dehydrogenation of a self-assembled monolayer (SAM) of biphenyl-thiol molecules (BPTs) adsorbed on a Au(111), as it has been experimentally observed for low energy electron irradiated SAMs of 4'-nitro-1,1'-biphenyl-thiol adsorbed on a Au(111) surface. [Eck, W. et al., Advanced Materials 2000, 1…
▽ More
We have performed a density functional theory study of the possible layered geometries occurring after dehydrogenation of a self-assembled monolayer (SAM) of biphenyl-thiol molecules (BPTs) adsorbed on a Au(111), as it has been experimentally observed for low energy electron irradiated SAMs of 4'-nitro-1,1'-biphenyl-thiol adsorbed on a Au(111) surface. [Eck, W. et al., Advanced Materials 2000, 12, 805] Cross-link formation between the BPT molecules has been analyzed using different models with different degrees of complexity. We start by analyzing the bonding between biphenyl (BP) molecules in a lineal dimer and their characteristic vibration frequencies. Next, we consider the most stable cross-linked structures formed in an extended free-standing monolayer of fully dehydrogenated BP molecules. Finally, we analyze a more realistic model where the role of the Au(111) substrate and sulphur head groups is explicitly taken into account. In this more complex model, the dehydrogenated BPT molecules are found to interact covalently to spontaneously form "graphene-like" nanoflakes. We propose that these nanographenes provide plausible building-blocks for the structure of the carbon layers formed by electron irradiation of BPT-SAMs. In particular, it is quite tempting to visualize those structures as the result of the cross-link and entanglement of such graphene nanoflakes.
△ Less
Submitted 6 September, 2010;
originally announced September 2010.
-
Potential Energy Landscape for hot electrons in periodically nanostructured graphene
Authors:
B. Borca,
S. Barja,
M. Garnica,
D. Sanchez-Portal,
V. M. Silkin,
E. V. Chulkov,
F. Hermanns,
J. J. Hinarejos,
A. L. Vazquez de Parga,
A. Arnau,
P. M. Echenique,
R. Miranda
Abstract:
We explore the spatial variations of the unoccupied electronic states of graphene epitaxially grown on Ru(0001) and observed three unexpected features: the first graphene image state is split in energy, unlike all other image states, the split state does not follow the local work function modulation, and a new interfacial state at +3 eV appears on some areas of the surface. These results show the…
▽ More
We explore the spatial variations of the unoccupied electronic states of graphene epitaxially grown on Ru(0001) and observed three unexpected features: the first graphene image state is split in energy, unlike all other image states, the split state does not follow the local work function modulation, and a new interfacial state at +3 eV appears on some areas of the surface. These results show the system behaves as a self-organized periodic array of quantum dots.
△ Less
Submitted 5 April, 2010;
originally announced April 2010.
-
Characterization of single-molecule pentanedithiol junctions by inelastic electron tunneling spectroscopy and first-principles calculations
Authors:
Carlos R. Arroyo,
Thomas Frederiksen,
Gabino Rubio-Bollinger,
Marisela Velez,
Andres Arnau,
Daniel Sanchez-Portal,
Nicolas Agrait
Abstract:
We study pentanedithiol molecular junctions formed by means of the break-junction technique with a scanning tunneling microscope at low temperatures. Using inelastic electron tunneling spectroscopy and first-principles calculations, the response of the junction to elastic deformation is examined. We show that this procedure makes a detailed characterization of the molecular junction possible. In…
▽ More
We study pentanedithiol molecular junctions formed by means of the break-junction technique with a scanning tunneling microscope at low temperatures. Using inelastic electron tunneling spectroscopy and first-principles calculations, the response of the junction to elastic deformation is examined. We show that this procedure makes a detailed characterization of the molecular junction possible. In particular, our results indicate that tunneling takes place through just a single molecule.
△ Less
Submitted 14 January, 2010;
originally announced January 2010.
-
First-Principles Study of Substitutional Metal Impurities in Graphene: Structural, Electronic and Magnetic Properties
Authors:
Elton J. G. Santos,
Andres Ayuela,
Daniel Sanchez-Portal
Abstract:
We present a theoretical study using density functional calculations of the structural, electronic and magnetic properties of 3d transition metal, noble metal and Zn atoms interacting with carbon monovacancies in graphene. We pay special attention to the electronic and magnetic properties of these substitutional impurities and found that they can be fully understood using a simple model based on…
▽ More
We present a theoretical study using density functional calculations of the structural, electronic and magnetic properties of 3d transition metal, noble metal and Zn atoms interacting with carbon monovacancies in graphene. We pay special attention to the electronic and magnetic properties of these substitutional impurities and found that they can be fully understood using a simple model based on the hybridization between the states of the metal atom, particularly the d shell, and the defect levels associated with an unreconstructed D3h carbon vacancy. We identify three different regimes associated with the occupation of different carbon-metal hybridized electronic levels:
(i) bonding states are completely filled for Sc and Ti, and these impurities are non-magnetic;
(ii) the non-bonding d shell is partially occupied for V, Cr and Mn and, correspondingly, these impurties present large and localized spin moments;
(iii) antibonding states with increasing carbon character are progressively filled for Co, Ni, the noble metals and Zn. The spin moments of these impurities oscillate between 0 and 1 Bohr magnetons and are increasingly delocalized.
The substitutional Zn suffers a Jahn-Teller-like distortion from the C3v symmetry and, as a consequence, has a zero spin moment. Fe occupies a distinct position at the border between regimes (ii) and (iii) and shows a more complex behavior: while is non-magnetic at the level of GGA calculations, its spin moment can be switched on using GGA+U calculations with moderate values of the U parameter.
△ Less
Submitted 2 October, 2009;
originally announced October 2009.
-
Magnetism of Substitutional Co Impurities in Graphene: Realization of Single $π$-Vacancies
Authors:
E. J. G. Santos,
D. Sanchez-Portal,
A. Ayuela
Abstract:
We report {\it ab initio} calculations of the structural, electronic and magnetic properties of a graphene monolayer substitutionally doped with Co (Co$_{sub}$) atoms. We focus in Co because among traditional ferromagnetic elements (Fe, Co and Ni), only Co$_{sub}$ atoms induce spin-polarization in graphene. Our results show the complex magnetism of Co substitutional impurites in graphene, which…
▽ More
We report {\it ab initio} calculations of the structural, electronic and magnetic properties of a graphene monolayer substitutionally doped with Co (Co$_{sub}$) atoms. We focus in Co because among traditional ferromagnetic elements (Fe, Co and Ni), only Co$_{sub}$ atoms induce spin-polarization in graphene. Our results show the complex magnetism of Co substitutional impurites in graphene, which is mapped into simple models such as the $π$-vacancy and Heisenberg model. The links established in our work can be used to bring into contact the engineering of nanostructures with the results of $π$-models in defective graphene. In principle, the structures considered here can be fabricated using electron irradiation or Ar$^+$ ion bombardment to create defects and depositing Co at the same time.
△ Less
Submitted 30 June, 2009;
originally announced June 2009.
-
Switching On Magnetism in Ni-doped Graphene
Authors:
E. J. G. Santos,
A. Ayuela,
S. B. Fagan,
J. Mendes Filho,
D. L. Azevedo,
A. G. Souza Filho,
D. Sánchez-Portal
Abstract:
Magnetic properties of graphenic carbon nanostructures, relevant for future spintronic applications, depend crucially on do** and on the presence of defects. In this paper we study the magnetism of the recently detected substitutional Ni (Ni(sub)) impurities. Ni(sub) defects are non-magnetic in flat graphene and develop a non-zero magnetic moment only in metallic nanotubes. This surprising beh…
▽ More
Magnetic properties of graphenic carbon nanostructures, relevant for future spintronic applications, depend crucially on do** and on the presence of defects. In this paper we study the magnetism of the recently detected substitutional Ni (Ni(sub)) impurities. Ni(sub) defects are non-magnetic in flat graphene and develop a non-zero magnetic moment only in metallic nanotubes. This surprising behavior stems from the peculiar curvature dependence of the electronic structure of Ni(sub). A similar magnetic/non-magnetic transition of Ni(sub) can be expected by applying anisotropic strain to a flat graphene layer.
△ Less
Submitted 17 September, 2008;
originally announced September 2008.
-
Systematic investigation of the structure of the Si(553)-Au surface from first principles
Authors:
Sampsa Riikonen,
Daniel Sanchez-Portal
Abstract:
We present here a comprehensive search for the structure of the Si(553)-Au reconstruction. More than two hundred different trial structures have been studied using first-principles density-functional calculations with the SIESTA code. An iterative procedure, with a step-by-step increase of the accuracy and computational cost of the calculations, was used to allow for the study of this large numb…
▽ More
We present here a comprehensive search for the structure of the Si(553)-Au reconstruction. More than two hundred different trial structures have been studied using first-principles density-functional calculations with the SIESTA code. An iterative procedure, with a step-by-step increase of the accuracy and computational cost of the calculations, was used to allow for the study of this large number of configurations. We have considered reconstructions restricted to the topmost bilayer and studied two types: i) "flat" surface-bilayer models, where atoms at the topmost bilayer present different coordinations and registries with the underlying bulk, and ii) nine different models based on the substitution of a silicon atom by a gold atom in different positions of a $π$-bonded chain reconstruction of the Si(553) surface. We have developed a compact notation that allows us to label and identify all these structures. This is very useful for the automatic generation of trial geometries and counting the number of inequivalent structures, i.e., structures having different bonding topologies. The most stable models are those that exhibit a honeycomb-chain structure at the step edge. One of our models (model f2) reproduces the main features of the room temperature photoemission and scanning-tunneling microscopy data. Thus we conclude that f2 structure is a good candidate for the high temperature structure of the Si(553)-Au surface.
△ Less
Submitted 11 December, 2007;
originally announced December 2007.
-
Electronic stop** power in insulators from first principles
Authors:
J. M. Pruneda,
D. Sanchez-Portal,
A. Arnau,
J. I. Juaristi,
Emilio Artacho
Abstract:
Using time-dependent density-functional theory we calculate from first principles the rate of energy transfer from a moving proton or antiproton to the electrons of an insulating material, LiF. The behavior of the electronic stop** power versus projectile velocity displays an effective threshold velocity of ~0.2 a.u. for the proton, consistent with recent experimental observations, and also fo…
▽ More
Using time-dependent density-functional theory we calculate from first principles the rate of energy transfer from a moving proton or antiproton to the electrons of an insulating material, LiF. The behavior of the electronic stop** power versus projectile velocity displays an effective threshold velocity of ~0.2 a.u. for the proton, consistent with recent experimental observations, and also for the antiproton. The calculated proton/antiproton stop**-power ratio is ~2.4 at velocities slightly above the threshold (v~0.4 a.u.), as compared to the experimental value of 2.1. The projectile energy loss mechanism is observed to be stationary and extremely local.
△ Less
Submitted 15 June, 2007; v1 submitted 12 June, 2007;
originally announced June 2007.
-
Atomic self-interaction correction for molecules and solids
Authors:
C. D. Pemmaraju,
T. Archer,
D. Sanchez-Portal,
S. Sanvito
Abstract:
We present an atomic orbital based approximate scheme for self-interaction correction (SIC) to the local density approximation of density functional theory. The method, based on the idea of Filippetti and Spaldin [Phys. Rev. B 67, 125109 (2003)], is implemented in a code using localized numerical atomic orbital basis sets and is now suitable for both molecules and extended solids. After deriving…
▽ More
We present an atomic orbital based approximate scheme for self-interaction correction (SIC) to the local density approximation of density functional theory. The method, based on the idea of Filippetti and Spaldin [Phys. Rev. B 67, 125109 (2003)], is implemented in a code using localized numerical atomic orbital basis sets and is now suitable for both molecules and extended solids. After deriving the fundamental equations as a non-variational approximation of the self-consistent SIC theory, we present results for a wide range of molecules and insulators. In particular, we investigate the effect of re-scaling the self-interaction correction and we establish a link with the existing atomic-like corrective scheme LDA+U. We find that when no re-scaling is applied, i.e. when we consider the entire atomic correction, the Kohn-Sham HOMO eigenvalue is a rather good approximation to the experimental ionization potential for molecules. Similarly the HOMO eigenvalues of negatively charged molecules reproduce closely the molecular affinities. In contrast a re-scaling of about 50% is necessary to reproduce insulator bandgaps in solids, which otherwise are largely overestimated. The method therefore represents a Kohn-Sham based single-particle theory and offers good prospects for applications where the actual position of the Kohn-Sham eigenvalues is important, such as quantum transport.
△ Less
Submitted 13 September, 2006;
originally announced September 2006.
-
Ab initio study of the double row model of the Si(553)-Au reconstruction
Authors:
Sampsa Riikonen,
Daniel Sanchez-Portal
Abstract:
Using x-ray diffraction Ghose et al. [Surf. Sci. {\bf 581} (2005) 199] have recently produced a structural model for the quantum-wire surface Si(553)-Au. This model presents two parallel gold wires located at the step edge. Thus, the structure and the gold coverage are quite different from previous proposals. We present here an ab initio study using density functional theory of the stability, el…
▽ More
Using x-ray diffraction Ghose et al. [Surf. Sci. {\bf 581} (2005) 199] have recently produced a structural model for the quantum-wire surface Si(553)-Au. This model presents two parallel gold wires located at the step edge. Thus, the structure and the gold coverage are quite different from previous proposals. We present here an ab initio study using density functional theory of the stability, electronic band structure and scanning tunneling microscopy images of this model.
△ Less
Submitted 23 December, 2005;
originally announced December 2005.
-
Metal-insulator transition in the In/Si(111) surface
Authors:
Sampsa Riikonen,
Andres Ayuela,
Daniel Sanchez-Portal
Abstract:
The metal-insulator transition observed in the In/Si(111)-4x1 reconstruction is studied by means of ab initio calculations of a simplified model of the surface. Different surface bands are identified and classified according to their origin and their response to several structural distortions. We support the, recently proposed [New J. of Phys. 7 (2005) 100], combination of a shear and a Peierls…
▽ More
The metal-insulator transition observed in the In/Si(111)-4x1 reconstruction is studied by means of ab initio calculations of a simplified model of the surface. Different surface bands are identified and classified according to their origin and their response to several structural distortions. We support the, recently proposed [New J. of Phys. 7 (2005) 100], combination of a shear and a Peierls distortions as the origin of the metal-insulator transition. Our results also seem to favor an electronic driving force for the transition.
△ Less
Submitted 23 December, 2005;
originally announced December 2005.