Showing 151–200 of 301 results for author: Russell, J

Effect of anti-crossings with cladding resonances on ultrafast nonlinear dynamics in gas-filled PCFs

Authors: Francesco Tani, Felix Köttig, David Novoa, Ralf Keding, Philip St. J. Russell

Abstract: Spectral anti-crossings between the fundamental guided mode and core wall resonances alter the dispersion in hollow-core anti-resonant-reflection photonic crystal fibers. Here we study the effect of this dispersion change on the nonlinear propagation and dynamics of ultrashort pulses. We find that it causes emission of narrow spectral peaks through a combination of four-wave mixing and dispersive… ▽ More Spectral anti-crossings between the fundamental guided mode and core wall resonances alter the dispersion in hollow-core anti-resonant-reflection photonic crystal fibers. Here we study the effect of this dispersion change on the nonlinear propagation and dynamics of ultrashort pulses. We find that it causes emission of narrow spectral peaks through a combination of four-wave mixing and dispersive wave emission. We further investigate the influence of the anti-crossings on nonlinear pulse propagation and show that their impact can be minimized by adjusting the core-wall thickness in such a way that the anti-crossings lie spectrally distant from the pump wavelength. △ Less

Submitted 4 October, 2017; originally announced October 2017.

Comments: 5 pages, 5 figures

Journal ref: Photonics Research Vol. 6, Issue 2, pp. 84-88 (2018)

Supramolecular transmission of soliton-encoded bit streams over astronomical distances

Authors: W. He, M. Pang, D. H. Yeh, J. Huang, C. R. Menyuk, P. St. J. Russell

Abstract: A stream of optical pulses, transmitted over long distances in optical fiber, will be affected by a variety of noise sources, leading to degradation in the signal-to-noise ratio. This noise accumulation sets generic capacity limits of all fiber-based optical signal transmission systems and has long been regarded as unavoidable. We report that by tailoring long-range, non-covalent inter-pulse inter… ▽ More A stream of optical pulses, transmitted over long distances in optical fiber, will be affected by a variety of noise sources, leading to degradation in the signal-to-noise ratio. This noise accumulation sets generic capacity limits of all fiber-based optical signal transmission systems and has long been regarded as unavoidable. We report that by tailoring long-range, non-covalent inter-pulse interactions, optical solitons in a fiber laser loop can robustly couple to each other and self-assemble into supramolecular structures that exhibit long-term stability, elementary diversity and the possibility of information encoding. We demonstrate error-free transmission of such self-assembled solitonic structures over many astronomical units without any active retiming, opening up the possibility of using bit-bit interactions to overcome noise accumulation in optical fiber telecommunications and bit-storage systems. △ Less

Submitted 31 July, 2018; v1 submitted 3 October, 2017; originally announced October 2017.

Comments: 19 pages, 3 figures in main text, 7 figures in supplementary information

Antibacterial properties of nonwoven wound dressings coated with Manuka honey or methylglyoxal

Authors: Sophie E. L. Bulman, Giuseppe Tronci, Parikshit Goswami, Chris Carr, Stephen J. Russell

Abstract: Manuka honey (MH) is used as an antibacterial agent in bioactive wound dressings via direct impregnation onto a suitable substrate. MH provides unique antibacterial activity when compared with conventional honeys, owing partly to one of its constituents, methylglyoxal (MGO). Aiming to investigate an antibiotic-free antimicrobial strategy, we studied the antibacterial activity of both MH and MGO (a… ▽ More Manuka honey (MH) is used as an antibacterial agent in bioactive wound dressings via direct impregnation onto a suitable substrate. MH provides unique antibacterial activity when compared with conventional honeys, owing partly to one of its constituents, methylglyoxal (MGO). Aiming to investigate an antibiotic-free antimicrobial strategy, we studied the antibacterial activity of both MH and MGO (at equivalent MGO concentrations) when applied as a physical coating to a nonwoven fabric wound dressing. When physically coated on to a cellulosic hydroentangled nonwoven fabric, it was found that concentrations of 0.0054 mg cm-2 of MGO in the form of MH and MGO was sufficient to achieve 100 CFU% bacteria reduction against gram-positive Staphylococcus aureus and gram-negative Klebsiella pneumoniae, based on BS EN ISO 20743:2007. A 3- to 20- fold increase in MGO concentration (0.0170 - 0.1 mg cm-2) was required to facilitate a good antibacterial effect (based on BS EN ISO 20645:2004) in terms of zone of inhibition and lack of growth under the sample. The minimum inhibitory concentration (MIC) and minimum bactericidal concentration (MBC) was also assessed for MGO in liquid form against three prevalent wound and healthcare-associated pathogens, i.e. Staphylococcus aureus, gram-negative Pseudomonas aeruginosa and gram-positive Enterococcus faecalis. Other than the case of MGO-containing fabrics, solutions with much higher MGO concentrations (128 mg L-1 - 1024 mg L-1) were required to provide either a bacteriostatic or bactericidal effect. The results presented in this study therefore demonstrate the relevance of MGO-based coating as an environment-friendly strategy for the design of functional dressings with antibiotic-free antimicrobial chemistries. △ Less

Submitted 13 August, 2017; originally announced September 2017.

Comments: 19 pages, 4 figures, 7 tables. Accepted in Materials

Dynamic tunable notch filters for the Antarctic Impulsive Transient Antenna (ANITA)

Authors: P. Allison, O. Banerjee, J. J. Beatty, A. Connolly, C. Deaconu, J. Gordon, P. W. Gorham, M. Kovacevich, C. Miki, E. Oberla, J. Roberts, B. Rotter, S. Stafford, K. Tatem, L. Batten, K. Belov, D. Z. Besson, W. R. Binns, V. Bugaev, P. Cao, C. Chen, P. Chen, Y. Chen, J. M. Clem, L. Cremonesi , et al. (34 additional authors not shown)

Abstract: The Antarctic Impulsive Transient Antenna (ANITA) is a NASA long-duration balloon experiment with the primary goal of detecting ultra-high-energy ($>10^{18}\,\mbox{eV}$) neutrinos via the Askaryan Effect. The fourth ANITA mission, ANITA-IV, recently flew from Dec 2 to Dec 29, 2016. For the first time, the Tunable Universal Filter Frontend (TUFF) boards were deployed for mitigation of narrow-band,… ▽ More The Antarctic Impulsive Transient Antenna (ANITA) is a NASA long-duration balloon experiment with the primary goal of detecting ultra-high-energy ($>10^{18}\,\mbox{eV}$) neutrinos via the Askaryan Effect. The fourth ANITA mission, ANITA-IV, recently flew from Dec 2 to Dec 29, 2016. For the first time, the Tunable Universal Filter Frontend (TUFF) boards were deployed for mitigation of narrow-band, anthropogenic noise with tunable, switchable notch filters. The TUFF boards also performed second-stage amplification by approximately 45 dB to boost the $\sim\,μ\mbox{V-level}$ radio frequency (RF) signals to $\sim$ mV-level for digitization, and supplied power via bias tees to the first-stage, antenna-mounted amplifiers. The other major change in signal processing in ANITA-IV is the resurrection of the $90^{\circ}$ hybrids deployed previously in ANITA-I, in the trigger system, although in this paper we focus on the TUFF boards. During the ANITA-IV mission, the TUFF boards were successfully operated throughout the flight. They contributed to a factor of 2.8 higher total instrument livetime on average in ANITA-IV compared to ANITA-III due to reduction of narrow-band, anthropogenic noise before a trigger decision is made. △ Less

Submitted 13 September, 2017; originally announced September 2017.

Comments: 27 pages, 19 figures

Long-range optical trap** and binding of microparticles in hollow-core photonic crystal fibre

Authors: Dmitry S. Bykov, Shangran Xie, Richard Zeltner, Andrey Machnev, Gordon K. L. Wong, Tijmen G. Euser, Philip St. J. Russell

Abstract: Optically levitated micro- and nanoparticles offer an ideal playground for investigating photon-phonon interactions over macroscopic distances. Here we report the observation of long-range optical binding of multiple microparticles, mediated by intermodal scattering and interference inside the evacuated core of a hollow-core photonic crystal fibre (HC-PCF). Three polystyrene particles with 1 μm di… ▽ More Optically levitated micro- and nanoparticles offer an ideal playground for investigating photon-phonon interactions over macroscopic distances. Here we report the observation of long-range optical binding of multiple microparticles, mediated by intermodal scattering and interference inside the evacuated core of a hollow-core photonic crystal fibre (HC-PCF). Three polystyrene particles with 1 μm diameter are stably bound together with an inter-particle distance of ~40 μm, or 50 times longer than the wavelength of the trap** laser. The bound-particle array can be translated to-and-fro over centimetre distances along the fibre. When evacuated to 6 mbar gas pressure, the collective mechanical modes of the bound-particle array could be observed. The measured inter-particle distance at equilibrium and mechanical eigen-frequencies are supported by a novel analytical formalism modelling the dynamics of the binding process. The HC-PCF system offers a unique platform for investigating the rich optomechanical dynamics of arrays of levitated particles in a well-isolated and protected environment. △ Less

Submitted 12 September, 2017; originally announced September 2017.

Many-particle effects in the cyclotron resonance of encapsulated monolayer graphene

Authors: B. Jordan Russell, Boyi Zhou, T. Taniguchi, K. Watanabe, Erik A. Henriksen

Abstract: We study the infrared cyclotron resonance of high mobility monolayer graphene encapsulated in hexagonal boron nitride, and simultaneously observe several narrow resonance lines due to interband Landau level transitions. By holding the magnetic field strength, $B$, constant while tuning the carrier density, $n$, we find the transition energies show a pronounced non-monotonic dependence on the Landa… ▽ More We study the infrared cyclotron resonance of high mobility monolayer graphene encapsulated in hexagonal boron nitride, and simultaneously observe several narrow resonance lines due to interband Landau level transitions. By holding the magnetic field strength, $B$, constant while tuning the carrier density, $n$, we find the transition energies show a pronounced non-monotonic dependence on the Landau level filling factor, $ν\propto n/B$. This constitutes direct evidence that electron-electron interactions contribute to the Landau level transition energies in graphene, beyond the single-particle picture. Additionally, a splitting occurs in transitions to or from the lowest Landau level, which is interpreted as a Dirac mass arising from coupling of the graphene and boron nitride lattices. △ Less

Submitted 26 January, 2018; v1 submitted 1 September, 2017; originally announced September 2017.

Comments: Final version post-peer review. Discussion section rewritten for clarity, minor edits made and references added

Journal ref: Phys. Rev. Lett. 120, 047401 (2018)

Homogenization approximations for unidirectional transport past randomly distributed sinks

Authors: Matthew J. Russell, Oliver E. Jensen

Abstract: Transport in biological systems often occurs in complex spatial environments involving random structures. Motivated by such applications, we investigate an idealised model for solute transport past an array of point sinks, randomly distributed along a line, which remove solute via first-order kinetics. Random sink locations give rise to long-range spatial correlations in the solute field and influ… ▽ More Transport in biological systems often occurs in complex spatial environments involving random structures. Motivated by such applications, we investigate an idealised model for solute transport past an array of point sinks, randomly distributed along a line, which remove solute via first-order kinetics. Random sink locations give rise to long-range spatial correlations in the solute field and influence the mean concentration. We present a non-standard approach to evaluating these features based on rationally approximating integrals of a suitable Green's function, which accommodates contributions varying on short and long lengthscales and has deterministic and stochastic components. We refine the results of classical two-scale methods for a periodic sink array (giving more accurate higher-order corrections with non-local contributions) and find explicit predictions for the fluctuations in concentration and disorder-induced corrections to the mean for both weakly and strongly disordered sink locations. Our predictions are validated across a large region of parameter space. △ Less

Submitted 14 September, 2018; v1 submitted 27 August, 2017; originally announced August 2017.

Comments: 28 pages, 7 figures and 2 tables

Meta-Learning MCMC Proposals

Authors: Tongzhou Wang, Yi Wu, David A. Moore, Stuart J. Russell

Abstract: Effective implementations of sampling-based probabilistic inference often require manually constructed, model-specific proposals. Inspired by recent progresses in meta-learning for training learning agents that can generalize to unseen environments, we propose a meta-learning approach to building effective and generalizable MCMC proposals. We parametrize the proposal as a neural network to provide… ▽ More Effective implementations of sampling-based probabilistic inference often require manually constructed, model-specific proposals. Inspired by recent progresses in meta-learning for training learning agents that can generalize to unseen environments, we propose a meta-learning approach to building effective and generalizable MCMC proposals. We parametrize the proposal as a neural network to provide fast approximations to block Gibbs conditionals. The learned neural proposals generalize to occurrences of common structural motifs across different models, allowing for the construction of a library of learned inference primitives that can accelerate inference on unseen models with no model-specific training required. We explore several applications including open-universe Gaussian mixture models, in which our learned proposals outperform a hand-tuned sampler, and a real-world named entity recognition task, in which our sampler yields higher final F1 scores than classical single-site Gibbs sampling. △ Less

Submitted 1 January, 2019; v1 submitted 20 August, 2017; originally announced August 2017.

Comments: 32nd Conference on Neural Information Processing Systems (NeurIPS 2018), Montreal, Canada

Search for Neutrinoless Double-Beta Decay with the Upgraded EXO-200 Detector

Authors: J. B. Albert, G. Anton, I. Badhrees, P. S. Barbeau, R. Bayerlein, D. Beck, V. Belov, M. Breidenbach, T. Brunner, G. F. Cao, W. R. Cen, C. Chambers, B. Cleveland, M. Coon, A. Craycraft, W. Cree, T. Daniels, M. Danilov, S. J. Daugherty, J. Daughhetee, J. Davis, S. Delaquis, A. Der Mesrobian-Kabakian, R. DeVoe, T. Didberidze , et al. (68 additional authors not shown)

Abstract: Results from a search for neutrinoless double-beta decay $0νββ$ of $^{136}$Xe are presented using the first year of data taken with the upgraded EXO-200 detector. Relative to previous searches by EXO-200, the energy resolution of the detector has been improved to $σ/E$=1.23%, the electric field in the drift region has been raised by 50%, and a system to suppress radon in the volume between the cry… ▽ More Results from a search for neutrinoless double-beta decay $0νββ$ of $^{136}$Xe are presented using the first year of data taken with the upgraded EXO-200 detector. Relative to previous searches by EXO-200, the energy resolution of the detector has been improved to $σ/E$=1.23%, the electric field in the drift region has been raised by 50%, and a system to suppress radon in the volume between the cryostat and lead shielding has been implemented. In addition, analysis techniques that improve topological discrimination between $0νββ$ and background events have been developed. Incorporating these hardware and analysis improvements, the median 90% confidence level $0νββ$ half-life sensitivity after combining with the full data set acquired before the upgrade has increased 2-fold to $3.7 \times 10^{25}$ yr. No statistically significant evidence for $0νββ$ is observed, leading to a lower limit on the $0νββ$ half-life of $1.8\times10^{25}$ yr at the 90% confidence level. △ Less

Submitted 26 February, 2018; v1 submitted 27 July, 2017; originally announced July 2017.

Comments: 6 pages, 4 figures, final version submitted to PRL

Journal ref: Phys. Rev. Lett. 120, 072701 (2018)

Soliton-effect self-compressed single-cycle 9.6-W mid-IR pulses from a 21-W OPCPA at 3.25 μm and 160 kHz

Authors: Ugaitz Elu, Matthias Baudisch, Hugo Pires, Francesco Tani, Michael H. Frosz, Felix Kottig, Alexey Ermolov, Philip St. J. Russell, Jens Biegert

Abstract: We report a 21-W mid-IR OPCPA that generates 131-μJ and 97 fs (sub-9-cycle) pulses at 160 kHz repetition rate and at a centre wavelength of 3.25 μm. Pulse-to-pulse stability of the CEP-stable output is excellent with 0.33% rms over 288 million pulses (30 min) and compression close to a single optical cycle was achieved through soliton self- compression inside a gas-filled mid-IR anti-resonant-guid… ▽ More We report a 21-W mid-IR OPCPA that generates 131-μJ and 97 fs (sub-9-cycle) pulses at 160 kHz repetition rate and at a centre wavelength of 3.25 μm. Pulse-to-pulse stability of the CEP-stable output is excellent with 0.33% rms over 288 million pulses (30 min) and compression close to a single optical cycle was achieved through soliton self- compression inside a gas-filled mid-IR anti-resonant-guiding photonic crystal fibre. Without any additional compression device, stable generation of 14.5 fs (1.35-optical-cycle) pulses was achieved at an average power of 9.6 W. The resulting peak power of 3.9 GW in combination with the near-single-cycle duration and intrinsic CEP stability, make our OPCPA a key-enabling technology for the next generation of extreme photonics, strong-field attosecond research and coherent X-ray science. △ Less

Submitted 24 July, 2017; v1 submitted 17 July, 2017; originally announced July 2017.

Enhanced Control of Transient Raman Scattering Using Buffered Hydrogen in Hollow-Core PCF

Authors: Pooria Hosseini, David Novoa, Amir Abdolvand, Philip St. J. Russell

Abstract: Many reports on stimulated Raman scattering in mixtures of Raman-active and noble gases indicate that the addition of a dispersive buffer gas increases the phase-mismatch to higher-order Stokes and antiStokes sidebands, resulting in preferential conversion to the first few Stokes lines, accompanied by a significant reduction in Raman gain due to collisions with buffer gas molecules. Here we report… ▽ More Many reports on stimulated Raman scattering in mixtures of Raman-active and noble gases indicate that the addition of a dispersive buffer gas increases the phase-mismatch to higher-order Stokes and antiStokes sidebands, resulting in preferential conversion to the first few Stokes lines, accompanied by a significant reduction in Raman gain due to collisions with buffer gas molecules. Here we report that, provided the dispersion can be precisely controlled, the effective Raman gain in gas-filled hollow-core photonic crystal fiber (PCF) can actually be significantly enhanced when a buffer gas is added. This counterintuitive behavior occurs when the nonlinear coupling between the interacting fields is strong, and can result in a performance similar to that of a pure Raman-active gas, but at much lower total gas pressure, allowing competing effects such as Raman backscattering to be suppressed. We report high modal purity in all the emitted sidebands, along with anti-Stokes conversion efficiencies as high as 5% in the visible and 2% in the ultraviolet. The results point to a new class of gas-based waveguide device in which the pressure-tunable nonlinear optical response is beneficially adjusted by the addition of other gases. △ Less

Submitted 23 June, 2017; originally announced June 2017.

Comments: 8 pages, 10 figures, contains supplementary material

Journal ref: Phys. Rev. Lett. 119, 253903 (2017)

Coherent control of flexural vibrations in dual-nanoweb fibers using phase-modulated two-frequency light

Authors: Johannes R. Koehler, Roman E. Noskov, Andrey A. Sukhorukov, David Novoa, Philip St. J. Russell

Abstract: Coherent control of the resonant response in spatially extended optomechanical structures is complicated by the fact that the optical drive is affected by the back-action from the generated phonons. Here we report a new approach to coherent control based on stimulated Raman-like scattering, in which the optical pressure can remain unaffected by the induced vibrations even in the regime of strong o… ▽ More Coherent control of the resonant response in spatially extended optomechanical structures is complicated by the fact that the optical drive is affected by the back-action from the generated phonons. Here we report a new approach to coherent control based on stimulated Raman-like scattering, in which the optical pressure can remain unaffected by the induced vibrations even in the regime of strong optomechanical interactions. We demonstrate experimentally coherent control of flexural vibrations simultaneously along the whole length of a dual-nanoweb fiber, by imprinting steps in the relative phase between the components of a two-frequency pump signal,the beat frequency being chosen to match a flexural resonance. Furthermore, sequential switching of the relative phase at time intervals shorter than the lifetime of the vibrations reduces their amplitude to a constant value that is fully adjustable by tuning the phase-modulation depth and switching rate. The results may trigger new developments in silicon photonics, since such coherent control uniquely decouples the amplitude of optomechanical oscillations from power-dependent thermal effects and nonlinear optical loss. △ Less

Submitted 18 December, 2017; v1 submitted 22 June, 2017; originally announced June 2017.

Comments: This 11 pages-long document includes the main text with 8 figures and an appendix with one figure

Journal ref: Phys. Rev. A 96, 063822 (2017)

Generation of micro-J pulses in the deep UV at MHz repetition rates

Authors: F. Köttig, F. Tani, J. C. Travers, P. St. J. Russell

Abstract: Although ultraviolet (UV) light is important in many areas of science and technology, there are very few if any lasers capable of delivering wavelength-tunable ultrashort UV pulses at MHz repetition rates. Here we report the generation of deep-UV laser pulses at MHz repetition rates and μJ-energies by means of dispersive wave (DW) emission from self-compressed solitons in gas-filled single-ring ho… ▽ More Although ultraviolet (UV) light is important in many areas of science and technology, there are very few if any lasers capable of delivering wavelength-tunable ultrashort UV pulses at MHz repetition rates. Here we report the generation of deep-UV laser pulses at MHz repetition rates and μJ-energies by means of dispersive wave (DW) emission from self-compressed solitons in gas-filled single-ring hollow-core photonic crystal fiber (SR-PCF). Pulses from an ytterbium fiber laser (~300 fs) are first compressed to ~25 fs in a SR-PCF-based nonlinear compression stage, and subsequently used to pump a second SR-PCF stage for broadband DW generation in the deep UV. The UV wavelength is tunable by selecting the gas species and the pressure. At 100 kHz repetition rate, a pulse energy of 1.05 μJ was obtained at 205 nm (average power 0.1 W), and at 1.92 MHz, a pulse energy of 0.54 μJ was obtained at 275 nm (average power 1.03 W). △ Less

Submitted 23 May, 2017; originally announced May 2017.

Journal ref: Optica 4, 1272 (2017)

Largest acylindrical actions and stability in hierarchically hyperbolic groups

Authors: Carolyn Abbott, Jason Behrstock, Daniel Berlyne, Matthew Gentry Durham, Jacob Russell

Abstract: We consider two manifestations of non-positive curvature: acylindrical actions on hyperbolic spaces and quasigeodesic stability. We study these properties for the class of hierarchically hyperbolic groups, which is a general framework for studying many important families of groups, including map** class groups, right-angled Coxeter and Artin groups, most 3-manifold groups, and many others. A gro… ▽ More We consider two manifestations of non-positive curvature: acylindrical actions on hyperbolic spaces and quasigeodesic stability. We study these properties for the class of hierarchically hyperbolic groups, which is a general framework for studying many important families of groups, including map** class groups, right-angled Coxeter and Artin groups, most 3-manifold groups, and many others. A group that admits an acylindrical action on a hyperbolic space may admit many such actions on different hyperbolic spaces, so it is natural to search for a "best" one. The set of all cobounded acylindrical actions on hyperbolic spaces admits a natural poset structure; in this paper we prove that all hierarchically hyperbolic groups admit a unique action which is the largest in this poset. The action we construct is also universal in the sense that every element which acts loxodromically in some acylindrical action on a hyperbolic space does so in this one. Special cases of this result are themselves new and interesting. For instance, this is the first proof that right-angled Coxeter groups admit universal acylindrical actions. The notion of quasigeodesic stability of subgroups provides a natural analogue of quasiconvexity outside the context of hyperbolic groups. We provide a complete classification of stable subgroups of hierarchically hyperbolic groups, generalizing and extending results that are known for map** class groups and right-angled Artin groups. We also provide a characterization of contracting quasigeodesics; interestingly, in this generality the proof is much simpler than in the special cases where it was already known. In the appendix, it is verified that any space satisfying the a priori weaker property of being an "almost hierarchically hyperbolic space" is actually a hierarchically hyperbolic space. The results of the appendix are used to streamline the proofs in the main text. △ Less

Submitted 4 August, 2020; v1 submitted 17 May, 2017; originally announced May 2017.

Comments: Primary article by Carolyn Abbott, Jason Behrstock, and Matthew Gentry Durham with an appendix by Daniel Berlyne and Jacob Russell. To appear in Transactions of the AMS

Searches for Double Beta Decay of $^{134}$Xe with EXO-200

Authors: EXO-200 Collaboration, :, J. B. Albert, G. Anton, I. Badhrees, P. S. Barbeau, R. Bayerlein, D. Beck, V. Belov, M. Breidenbach, T. Brunner, G. F. Cao, W. R. Cen, C. Chambers, B. Cleveland, M. Coon, A. Craycraft, W. Cree, T. Daniels, M. Danilov, S. J. Daugherty, J. Daughhetee, J. Davis, S. Delaquis, A. Der Mesrobian-Kabakian , et al. (69 additional authors not shown)

Abstract: Searches for double beta decay of $^{134}$Xe were performed with EXO-200, a single-phase liquid xenon detector designed to search for neutrinoless double beta decay of $^{136}$Xe. Using an exposure of $29.6\text{ kg}\!\cdot\!\text{yr}$, the lower limits of $\text{T}_{1/2}^{2νβ\!β}>8.7\cdot10^{20}\text{ yr}$ and $\text{T}_{1/2}^{0νβ\!β}>1.1\cdot10^{23}\text{ yr}$ at 90% confidence level were derive… ▽ More Searches for double beta decay of $^{134}$Xe were performed with EXO-200, a single-phase liquid xenon detector designed to search for neutrinoless double beta decay of $^{136}$Xe. Using an exposure of $29.6\text{ kg}\!\cdot\!\text{yr}$, the lower limits of $\text{T}_{1/2}^{2νβ\!β}>8.7\cdot10^{20}\text{ yr}$ and $\text{T}_{1/2}^{0νβ\!β}>1.1\cdot10^{23}\text{ yr}$ at 90% confidence level were derived, with corresponding half-life sensitivities of $1.2\cdot10^{21}\text{ yr}$ and $1.9\cdot10^{23}\text{ yr}$. These limits exceed those in the literature for $^{134}$Xe, improving by factors of nearly $10^{5}$ and 2 for the two antineutrino and neutrinoless modes, respectively. △ Less

Submitted 6 November, 2017; v1 submitted 17 April, 2017; originally announced April 2017.

Comments: 8 pages, 4 figures

Journal ref: Phys. Rev. D 96, 092001 (2017)

OSIRIS-REx Contamination Control Strategy and Implementation

Authors: J. P. Dworkin, L. A. Adelman, T. Ajluni, A. V. Andronikov, J. C. Aponte, A. E. Bartels, E. Beshore, E. B. Bierhaus, J. R. Brucato, B. H. Bryan, A. S. Burton, M. P. Callahan, S. L. Castro-Wallace, B. C. Clark, S. J. Clemett, H. C. Connolly Jr., W. E. Cutlip, S. M. Daly, V. E. Elliott, J. E. Elsila, H. L. Enos, D. F. Everett, I. A. Franchi, D. P. Glavin, H. V. Graham , et al. (37 additional authors not shown)

Abstract: OSIRIS-REx will return pristine samples of carbonaceous asteroid Bennu. This article describes how pristine was defined based on expectations of Bennu and on a realistic understanding of what is achievable with a constrained schedule and budget, and how that definition flowed to requirements and implementation. To return a pristine sample, the OSIRIS- REx spacecraft sampling hardware was maintaine… ▽ More OSIRIS-REx will return pristine samples of carbonaceous asteroid Bennu. This article describes how pristine was defined based on expectations of Bennu and on a realistic understanding of what is achievable with a constrained schedule and budget, and how that definition flowed to requirements and implementation. To return a pristine sample, the OSIRIS- REx spacecraft sampling hardware was maintained at level 100 A/2 and <180 ng/cm2 of amino acids and hydrazine on the sampler head through precision cleaning, control of materials, and vigilance. Contamination is further characterized via witness material exposed to the spacecraft assembly and testing environment as well as in space. This characterization provided knowledge of the expected background and will be used in conjunction with archived spacecraft components for comparison with the samples when they are delivered to Earth for analysis. Most of all, the cleanliness of the OSIRIS-REx spacecraft was achieved through communication among scientists, engineers, managers, and technicians. △ Less

Submitted 26 October, 2017; v1 submitted 8 April, 2017; originally announced April 2017.

Comments: 75 pages, 28 figures, 2 supplements, accepted for publication in Space Science Reviews

Comparison of Pulsar Positions from Timing and Very Long Baseline Astrometry

Authors: J. B. Wang, W. A. Coles, G. Hobbs, R. M. Shannon, R. N. Manchester, M. Kerr, J. P. Yuan, N. Wang, M. Bailes, N. D. R. Bhat, S. Dai J. Dempsey, M. J. Keith, P. D. Lasky, Y. Levin, S. Os lowski, V. Ravi, D. J. Reardon, P A. Rosado, C. J. Russell, R. Spiewak, W. van Straten, L. Toomey, L. Wen, X. -P. You, X. -J. Zhu

Abstract: Pulsar positions can be measured with high precision using both pulsar timing methods and very-long-baseline interferometry (VLBI). Pulsar timing positions are referenced to a solar-system ephemeris, whereas VLBI positions are referenced to distant quasars. Here we compare pulsar positions from published VLBI measurements with those obtained from pulsar timing data from the Nanshan and Parkes radi… ▽ More Pulsar positions can be measured with high precision using both pulsar timing methods and very-long-baseline interferometry (VLBI). Pulsar timing positions are referenced to a solar-system ephemeris, whereas VLBI positions are referenced to distant quasars. Here we compare pulsar positions from published VLBI measurements with those obtained from pulsar timing data from the Nanshan and Parkes radio telescopes in order to relate the two reference frames. We find that the timing positions differ significantly from the VLBI positions (and also differ between different ephemerides). A statistically significant change in the obliquity of the ecliptic of $2.16\pm0.33$\,mas is found for the JPL ephemeris DE405, but no significant rotation is found in subsequent JPL ephemerides. The accuracy with which we can relate the two frames is limited by the current uncertainties in the VLBI reference source positions and in matching the pulsars to their reference source. Not only do the timing positions depend on the ephemeris used in computing them, but also different segments of the timing data lead to varying position estimates. These variations are mostly common to all ephemerides, but slight changes are seen at the 10$μ$as level between ephemerides. △ Less

Submitted 31 March, 2017; originally announced April 2017.

Comments: accepted by MNRAS,22 pages, 5 figures

Trace radioactive impurities in final construction materials for EXO-200

Authors: D. S. Leonard, D. Auty, T. Didberidze, R. Gornea, P. Grinberg, R. MacLellan, B. Methven, A. Piepke, J. -L. Vuilleumier, J. B. Albert, G. Anton, I. Badhrees, P. S. Barbeau, R. Bayerlein, D. Beck, V. Belov, M. Breidenbach, T. Brunner, G. F. Cao, W. R. Cen, C. Chambers, B. Cleveland, M. Coon, A. Craycraft, W. Cree , et al. (76 additional authors not shown)

Abstract: We report results from a systematic measurement campaign conducted to identify low radioactivity materials for the construction of the EXO-200 double beta decay experiment. Partial results from this campaign have already been reported in a 2008 paper by the EXO collaboration. Here we release the remaining data, collected since 2007, to the public. The data reported were obtained using a variety of… ▽ More We report results from a systematic measurement campaign conducted to identify low radioactivity materials for the construction of the EXO-200 double beta decay experiment. Partial results from this campaign have already been reported in a 2008 paper by the EXO collaboration. Here we release the remaining data, collected since 2007, to the public. The data reported were obtained using a variety of analytic techniques. The measurement sensitivities are among the best in the field. Construction of the EXO-200 detector has been concluded, and Phase-I data was taken from 2011 to 2014. The detector's extremely low background implicitly verifies the measurements and the analysis assumptions made during construction and reported in this paper. △ Less

Submitted 31 March, 2017; originally announced March 2017.

Comments: 28 pages, 5 figures

Continuously wavelength-tunable high harmonic generation via soliton dynamics

Authors: Francesco Tani, Michael H. Frosz, John C. Travers, Philip St. J. Russell

Abstract: We report generation of high harmonics in a gas-jet pumped by pulses self-compressed in a He-filled hollow-core photonic crystal fiber through the soliton effect. The gas-jet is placed directly at the fiber output. As the energy increases the ionization-induced soliton blue-shift is transferred to the high harmonics, leading to a emission bands that are continuously tunable from 17 to 45 eV. We report generation of high harmonics in a gas-jet pumped by pulses self-compressed in a He-filled hollow-core photonic crystal fiber through the soliton effect. The gas-jet is placed directly at the fiber output. As the energy increases the ionization-induced soliton blue-shift is transferred to the high harmonics, leading to a emission bands that are continuously tunable from 17 to 45 eV. △ Less

Submitted 26 March, 2017; originally announced March 2017.

Cooperative Localisation of a GPS-Denied UAV in 3-Dimensional Space Using Direction of Arrival Measurements

Authors: James Russell, Mengbin Ye, Brian D. O. Anderson, Hatem Hmam, Peter Sarunic

Abstract: This paper presents a novel approach for localising a GPS (Global Positioning System)-denied Unmanned Aerial Vehicle (UAV) with the aid of a GPS-equipped UAV in three-dimensional space. The GPS-equipped UAV makes discrete-time broadcasts of its global coordinates. The GPS-denied UAV simultaneously receives the broadcast and takes direction of arrival (DOA) measurements towards the origin of the br… ▽ More This paper presents a novel approach for localising a GPS (Global Positioning System)-denied Unmanned Aerial Vehicle (UAV) with the aid of a GPS-equipped UAV in three-dimensional space. The GPS-equipped UAV makes discrete-time broadcasts of its global coordinates. The GPS-denied UAV simultaneously receives the broadcast and takes direction of arrival (DOA) measurements towards the origin of the broadcast in its local coordinate frame (obtained via an inertial navigation system (INS)). The aim is to determine the difference between the local and global frames, described by a rotation and a translation. In the noiseless case, global coordinates were recovered exactly by solving a system of linear equations. When DOA measurements are contaminated with noise, rank relaxed semidefinite programming (SDP) and the Orthogonal Procrustes algorithm are employed. Simulations are provided and factors affecting accuracy, such as noise levels and number of measurements, are explored. △ Less

Submitted 18 March, 2017; originally announced March 2017.

Control of ultrafast pulses in hydrogen-filled hollow-core photonic crystal fiber by Raman coherence

Authors: Federico Belli, Amir Abdolvand, John C. Travers, Philip St. J. Russell

Abstract: We present the results of an experimental and numerical investigation into temporally non-local coherent interactions between ultrashort pulses, mediated by Raman coherence, in gas-filled kagomé-style hollow-core photonic crystal fiber. A pump pulse first set up the Raman coherence, creating a refractive index grating in the gas that travels at the group velocity of the pump pulse. Varying the arr… ▽ More We present the results of an experimental and numerical investigation into temporally non-local coherent interactions between ultrashort pulses, mediated by Raman coherence, in gas-filled kagomé-style hollow-core photonic crystal fiber. A pump pulse first set up the Raman coherence, creating a refractive index grating in the gas that travels at the group velocity of the pump pulse. Varying the arrival time of a second probe pulse allows high degree of control over its evolution as it propagates along the fiber, in particular soliton self-compression and dispersive wave (DW) emission. In the experiments reported, a DW is emitted at ~300 nm, with a central frequency that oscillates with the pump-probe delay. The results demonstrate that strong Raman coherence created in broadband guiding gas-filled kagomé-PCF can be used to control the dynamics of ultrashort probe pulses, even in difficult-to-access spectral regions such as the deep and vacuum ultraviolet. △ Less

Submitted 13 March, 2017; originally announced March 2017.

Journal ref: Phys. Rev. A 97, 013814 (2018)

Twist-tuned suppression of higher-order modes in single-ring hollow-core photonic crystal fibers

Authors: N. N. Edavalath, M. C. Günendi, R. Beravat, G. K. L. Wong, M. H. Frosz, J. -M. Ménard, P. ST. J. Russell

Abstract: Optimum suppression of higher order modes in single-ring hollow-core photonic crystal fibers (SR-PCFs) occurs when the capillary-to-core diameter ratio d/D = 0.68. Here we report that, in SR-PCFs with sub-optimal values of d/D, higher-order mode suppression can be recovered by spinning the preform during fiber drawing, thus introducing a continuous helical twist. This geometrically increases the e… ▽ More Optimum suppression of higher order modes in single-ring hollow-core photonic crystal fibers (SR-PCFs) occurs when the capillary-to-core diameter ratio d/D = 0.68. Here we report that, in SR-PCFs with sub-optimal values of d/D, higher-order mode suppression can be recovered by spinning the preform during fiber drawing, thus introducing a continuous helical twist. This geometrically increases the effective axial propagation constant (initially too low) of the LP01-like modes of the capillaries surrounding the core, enabling robust single-mode operation. The effect is explored by means of extensive numerical modeling, an analytical model and a series of experiments. Prism-assisted side-coupling is used to investigate the losses and near-field patterns of individual fiber modes in both the straight and twisted cases. More than 12 dB/m improvement in higher order mode suppression is achieved experimentally in a twisted PCF. The measurements also show that the higher order mode profiles change with twist rate, as predicted by numerical simulations. Helical twisting offers an additional tool for achieving effectively endlessly single-mode operation in hollow-core SR-PCFs. △ Less

Submitted 2 March, 2017; originally announced March 2017.

Signal-based Bayesian Seismic Monitoring

Authors: David A. Moore, Stuart J. Russell

Abstract: Detecting weak seismic events from noisy sensors is a difficult perceptual task. We formulate this task as Bayesian inference and propose a generative model of seismic events and signals across a network of spatially distributed stations. Our system, SIGVISA, is the first to directly model seismic waveforms, allowing it to incorporate a rich representation of the physics underlying the signal gene… ▽ More Detecting weak seismic events from noisy sensors is a difficult perceptual task. We formulate this task as Bayesian inference and propose a generative model of seismic events and signals across a network of spatially distributed stations. Our system, SIGVISA, is the first to directly model seismic waveforms, allowing it to incorporate a rich representation of the physics underlying the signal generation process. We use Gaussian processes over wavelet parameters to predict detailed waveform fluctuations based on historical events, while degrading smoothly to simple parametric envelopes in regions with no historical seismicity. Evaluating on data from the western US, we recover three times as many events as previous work, and reduce mean location errors by a factor of four while greatly increasing sensitivity to low-magnitude events. △ Less

Submitted 1 March, 2017; originally announced March 2017.

Comments: Appearing at AISTATS 2017

Antarctic Surface Reflectivity Measurements from the ANITA-3 and HiCal-1 Experiments

Authors: P. W. Gorham, P. Allison, O. Banerjee, J. J. Beatty, K. Belov, D. Z. Besson, W. R. Binns, V. Bugaev, P. Cao, C. Chen, P. Chen, J. M. Clem, A. Connolly, B. Dailey, P. Dasgupta, C. Deaconu, L. Cremonesi, P. F. Dowkontt, B. D. Fox, J. Gordon, B. Hill, R. Hupe, M. H. Israel, P. Jain, J. Kowalski , et al. (31 additional authors not shown)

Abstract: The primary science goal of the NASA-sponsored ANITA project is measurement of ultra-high energy neutrinos and cosmic rays, observed via radio-frequency signals resulting from a neutrino- or cosmic ray- interaction with terrestrial matter (atmospheric or ice molecules, e.g.). Accurate inference of the energies of these cosmic rays requires understanding the transmission/reflection of radio wave si… ▽ More The primary science goal of the NASA-sponsored ANITA project is measurement of ultra-high energy neutrinos and cosmic rays, observed via radio-frequency signals resulting from a neutrino- or cosmic ray- interaction with terrestrial matter (atmospheric or ice molecules, e.g.). Accurate inference of the energies of these cosmic rays requires understanding the transmission/reflection of radio wave signals across the ice-air boundary. Satellite-based measurements of Antarctic surface reflectivity, using a co-located transmitter and receiver, have been performed more-or-less continuously for the last few decades. Satellite-based reflectivity surveys, at frequencies ranging from 2--45 GHz and at near-normal incidence, yield generally consistent reflectivity maps across Antarctica. Using the Sun as an RF source, and the ANITA-3 balloon borne radio-frequency antenna array as the RF receiver, we have also measured the surface reflectivity over the interval 200-1000 MHz, at elevation angles of 12-30 degrees, finding agreement with the Fresnel equations within systematic errors. To probe low incidence angles, inaccessible to the Antarctic Solar technique and not probed by previous satellite surveys, a novel experimental approach ("HiCal-1") was devised. Unlike previous measurements, HiCal-ANITA constitute a bi-static transmitter-receiver pair separated by hundreds of kilometers. Data taken with HiCal, between 200--600 MHz shows a significant departure from the Fresnel equations, constant with frequency over that band, with the deficit increasing with obliquity of incidence, which we attribute to the combined effects of possible surface roughness, surface grain effects, radar clutter and/or shadowing of the reflection zone due to Earth curvature effects. △ Less

Submitted 21 June, 2017; v1 submitted 1 March, 2017; originally announced March 2017.

Comments: updated to match publication version

PHz-wide spectral interference through coherent plasma-induced fission of higher-order solitons

Authors: F. Köttig, F. Tani, J. C. Travers, P. St. J. Russell

Abstract: We identify a novel regime of soliton-plasma interactions in which high-intensity ultrashort pulses of intermediate soliton order undergo coherent plasma-induced fission. Experimental results obtained in gas-filled hollow-core photonic crystal fibers are supported by rigorous numerical simulations. The cumulative blueshift of higher-order input solitons with ionizing intensities results in pulse s… ▽ More We identify a novel regime of soliton-plasma interactions in which high-intensity ultrashort pulses of intermediate soliton order undergo coherent plasma-induced fission. Experimental results obtained in gas-filled hollow-core photonic crystal fibers are supported by rigorous numerical simulations. The cumulative blueshift of higher-order input solitons with ionizing intensities results in pulse splitting before the ultimate self-compression point, leading to the generation of robust pulse pairs with PHz bandwidths. The novel dynamics closes the gap between plasma-induced adiabatic soliton compression and modulational instability. △ Less

Submitted 8 February, 2017; originally announced February 2017.

Journal ref: Phys. Rev. Lett. 118, 263902 (2017)

Science Objective: Understanding Energy Transport by Alfvénic Waves in Solar Flares

Authors: Jeffrey W. Reep, Harry P. Warren, James E. Leake, Lucas A. Tarr, Alexander J. B. Russell, Graham S. Kerr, Hugh S. Hudson

Abstract: Solar flares are driven by the release of magnetic energy from reconnection events in the solar corona, whereafter energy is transported to the chromosphere, heating the plasma and causing the characteristic radiative losses. In the collisional thick-target model, electrons accelerated to energies exceeding 10 keV traverse the corona and impact the chromosphere, where they deposit their energy thr… ▽ More Solar flares are driven by the release of magnetic energy from reconnection events in the solar corona, whereafter energy is transported to the chromosphere, heating the plasma and causing the characteristic radiative losses. In the collisional thick-target model, electrons accelerated to energies exceeding 10 keV traverse the corona and impact the chromosphere, where they deposit their energy through collisions with the much denser plasma in the lower atmosphere. While there are undoubtedly high energy non-thermal electrons accelerated in flares, it is unclear whether these electron beams are the sole mechanism of energy transport, or whether they only dominate in certain phases of the flare's evolution. Alfvénic waves are generated during the post-reconnection relaxation of magnetic field lines, so it is important to examine their role in energy transport. △ Less

Submitted 6 February, 2017; originally announced February 2017.

Comments: Next Generation Solar Physics Mission White paper, 4 pages, 2 figures

Generation of Broadband Mid-IR and UV Light in Gas-Filled Single-Ring Hollow-Core PCF

Authors: Marco Cassataro, David Novoa, Mehmet C. Günendi, Nitin N. Edavalath, Michael H. Frosz, John C. Travers, Philip St. J. Russell

Abstract: We report generation of an ultrafast supercontinuum extending into the mid- infrared in gas-filled single-ring hollow-core photonic crystal fiber (SR-PCF) pumped by 1.7 $μ$m light from an optical parametric amplifier. The simple fiber structure offers shallow dispersion and flat transmission in the near and mid-infrared, enabling the generation of broadband spectra extending from 300 nm to 3.1… ▽ More We report generation of an ultrafast supercontinuum extending into the mid- infrared in gas-filled single-ring hollow-core photonic crystal fiber (SR-PCF) pumped by 1.7 $μ$m light from an optical parametric amplifier. The simple fiber structure offers shallow dispersion and flat transmission in the near and mid-infrared, enabling the generation of broadband spectra extending from 300 nm to 3.1 $μ$m, with a total energy of a few $μ$J. In addition, we report the emission of ultraviolet dispersive waves whose frequency can be tuned simply by adjusting the pump wavelength. SR-PCF also provides an effective means of compressing and delivering tunable ultrafast pulses in the near and mid-infrared spectral regions. △ Less

Submitted 25 January, 2017; originally announced January 2017.

Comments: 7 pages, 4 figures

Novel mid-infrared dispersive wave generation in gas-filled PCF by transient ionization-driven changes in dispersion

Authors: F. Köttig, D. Novoa, F. Tani, M. Cassataro, J. C. Travers, P. St. J. Russell

Abstract: Gas-filled hollow-core photonic crystal fibre (PCF) is being used to generate ever wider supercontinuum spectra, in particular via dispersive wave (DW) emission in the deep and vacuum ultraviolet, with a multitude of applications. DWs are the result of the resonant transfer of energy from a self-compressed soliton, a process which relies crucially on phase matching. It was recently predicted that,… ▽ More Gas-filled hollow-core photonic crystal fibre (PCF) is being used to generate ever wider supercontinuum spectra, in particular via dispersive wave (DW) emission in the deep and vacuum ultraviolet, with a multitude of applications. DWs are the result of the resonant transfer of energy from a self-compressed soliton, a process which relies crucially on phase matching. It was recently predicted that, in the strong-field regime, the additional transient anomalous dispersion introduced by gas ionization would allow phase-matched DW generation in the mid-infrared (MIR)-something that is forbidden in the absence of free electrons. Here we report for the first time the experimental observation of such MIR DWs, embedded in a 4.7-octave-wide supercontinuum that uniquely reaches simultaneously to the vacuum ultraviolet, with up to 1.7 W of total average power. △ Less

Submitted 17 January, 2017; originally announced January 2017.

Journal ref: Nat. Commun. 8, 813 (2017)

Injective stabilization of additive functors. III. Asymptotic stabilization of the tensor product

Authors: Alex Martsinkovsky, Jeremy Russell

Abstract: The injective stabilization of the tensor product is subjected to an iterative procedure that utilizes its bifunctor property. The limit of this procedure, called the asymptotic stabilization of the tensor product, provides a homological counterpart of Buchweitz's asymptotic construction of stable cohomology. The resulting connected sequence of functors is isomorphic to Triulzi's $J$-completion of… ▽ More The injective stabilization of the tensor product is subjected to an iterative procedure that utilizes its bifunctor property. The limit of this procedure, called the asymptotic stabilization of the tensor product, provides a homological counterpart of Buchweitz's asymptotic construction of stable cohomology. The resulting connected sequence of functors is isomorphic to Triulzi's $J$-completion of the Tor functor. A comparison map from Vogel homology to the asymptotic stabilization of the tensor product is constructed and shown to be always epic. The category of finitely presented functors is shown to be complete and (co)complete. As a consequence, the inert injective stabilization of the tensor product with fixed variable a finitely generated module over an artin algebra is shown to be finitely presented. A description of its defect and all right-derived functors is given. A surprising connection with Buchweitz cohomology based on injectives is established △ Less

Submitted 4 September, 2020; v1 submitted 1 January, 2017; originally announced January 2017.

Comments: 37 pages. More details on the asymptotic torsion and cotorsion have been added

MSC Class: 16E30

Injective stabilization of additive functors. II. (Co)torsion and the Auslander-Gruson-Jensen functor

Authors: Alex Martsinkovsky, Jeremy Russell

Abstract: The formalism of injective stabilization of additive functors is used to define a new notion of the torsion submodule of a module. It applies to arbitrary modules over arbitrary rings. For arbitrary modules over commutative domains it coincides with the classical torsion, and for finitely presented modules over arbitrary rings it coincides with the Bass torsion. A formally dual approach -- based o… ▽ More The formalism of injective stabilization of additive functors is used to define a new notion of the torsion submodule of a module. It applies to arbitrary modules over arbitrary rings. For arbitrary modules over commutative domains it coincides with the classical torsion, and for finitely presented modules over arbitrary rings it coincides with the Bass torsion. A formally dual approach -- based on projective stabilization -- gives rise to a new concept: the cotorsion quotient module of a module. This is done in complete generality -- the new concept is defined for any module over any ring. Unlike torsion, cotorsion does not have classical prototypes. General properties of these constructs are established. It is shown that the Auslander-Gruson-Jensen functor applied to the cotorsion functor returns the torsion functor. As a consequence, a ring is one-sided absolutely pure if and only if each pure injective on the other side is cotorsion-free. If the injective envelope of the ring is finitely presented, then the right adjoint of the Auslander-Gruson-Jensen functor applied to the torsion functor returns the cotorsion functor. This correspondence establishes a duality between torsion and cotorsion over such rings. In particular, this duality applies to artin algebras. It is also shown that, over any ring, the character module of the torsion of a module is isomorphic to the cotorsion of the character module of the module. Under various finiteness conditions on the injective envelope of the ring, the derived functors of torsion and cotorsion are computed. △ Less

Submitted 30 November, 2019; v1 submitted 31 December, 2016; originally announced January 2017.

Comments: 35 pages. A major update, with a total of 13 pages and numerous new results added. The most significant aspect of this version is the fundamental role played by the trace of injectives and, as a consequence, a determination of all derived functors of torsion and cotorsion over rings with a suitable finiteness condition. New material is typeset in purple and blue colors

Injective stabilization of additive functors. I. Preliminaries

Authors: Alex Martsinkovsky, Jeremy Russell

Abstract: This paper is the first one in a series of three dealing with the concept of injective stabilization of the tensor product and its applications. Its primary goal is to collect known facts and establish a basic operational calculus that will be used in the subsequent parts. This is done in greater generality than is necessary for the stated goal. Several results of independent interest are also est… ▽ More This paper is the first one in a series of three dealing with the concept of injective stabilization of the tensor product and its applications. Its primary goal is to collect known facts and establish a basic operational calculus that will be used in the subsequent parts. This is done in greater generality than is necessary for the stated goal. Several results of independent interest are also established. They include, among other things, connections with satellites, an explicit construction of the stabilization of a finitely presented functor, various exactness properties of the injectively stable functors, a construction, from a functor and a short exact sequence, of a doubly-infinite exact sequence by splicing the injective stabilization of the functor and its derived functors. When specialized to the tensor product with a finitely presented module, the injective stabilization with coefficients in the ring is isomorphic to the 1-torsion functor. The Auslander-Reiten formula is extended to a more general formula, which holds for arbitrary (i.e., not necessarily finite) modules over arbitrary associative rings with identity. Weakening of the assumptions in the theorems of Eilenberg and Watts leads to characterizations of the requisite zeroth derived functors. The subsequent papers, provide applications of the developed techniques. Part~II deals with new notions of torsion module and cotorsion module of a module. This is done for arbitrary modules over arbitrary rings. Part~III introduces a new concept, called the asymptotic stabilization of the tensor product. The result is closely related to different variants of stable homology (these are generalizations of Tate homology to arbitrary rings). A comparison transformation from Vogel homology to the asymptotic stabilization of the tensor product is constructed and shown to be epic. △ Less

Submitted 9 September, 2018; v1 submitted 31 December, 2016; originally announced January 2017.

Comments: 34 pages. This is a major update: a new Section 3, dealing with zeroth derived functors, has been added to the previous version

MSC Class: 16E30

Derived Recollements and Generalised AR Formulas

Authors: Samuel Dean, Jeremy Russell

Abstract: The Defect Recollement, Restriction Recollement, Auslander-Gruson-Jensen Recollement, and others, are shown to be instances of a general construction using derived functors and methods from stable module theory. The right derived functors $\textsf{W}_k:=R_k(\hspace{0.05cm}\underline{\ \ }\hspace{0.1cm} )^*$ are computed and it is shown that the functor… ▽ More The Defect Recollement, Restriction Recollement, Auslander-Gruson-Jensen Recollement, and others, are shown to be instances of a general construction using derived functors and methods from stable module theory. The right derived functors $\textsf{W}_k:=R_k(\hspace{0.05cm}\underline{\ \ }\hspace{0.1cm} )^*$ are computed and it is shown that the functor $\textsf{W}_2:=R_2(\hspace{0.05cm}\underline{\ \ }\hspace{0.1cm} )^*$ is right exact and restricts to a duality $\textsf{W}$ of the defect zero functors. The duality $\textsf{W}$ satisfies two identities which we call the Generalised Auslander-Reiten formulas. We show that $\textsf{W}$ restricts to the generalised Auslander-Bridger transpose and show that the Generalised Auslander-Reiten formulas reduce to the well-known Auslander-Reiten formulas. △ Less

Submitted 17 December, 2016; v1 submitted 5 December, 2016; originally announced December 2016.

Hydrolytic and lysozymic degradability of chitosan systems with heparin-mimicking pendant groups

Authors: Giuseppe Tronci, Petronela Buiga, Ahmed Alhilou, Thuy Do, Stephen J. Russell, David J. Wood

Abstract: Chitosan (CT) is an antibacterial polysaccharide that has been investigated for drug carriers, haemostats and wound dressings. For these applications, customised CT devices can often be obtained with specific experimental conditions, which can irreversibly alter native biopolymer properties and functions and lead to unreliable material behaviour. In order to investigate the structure-function rela… ▽ More Chitosan (CT) is an antibacterial polysaccharide that has been investigated for drug carriers, haemostats and wound dressings. For these applications, customised CT devices can often be obtained with specific experimental conditions, which can irreversibly alter native biopolymer properties and functions and lead to unreliable material behaviour. In order to investigate the structure-function relationships in CT covalent networks, monosodium 5-sulfoisophthalate (PhS) was selected as heparin-mimicking, growth factor-binding crosslinking segment, whilst 1,4-phenylenediacetic acid (4Ph) and poly(ethylene glycol) bis(carboxymethyl) ether (PEG) were employed as sulfonic acid-free diacids of low and high crosslinker length respectively. Hydrogels based on short crosslinkers (PhS and 4Ph) displayed increased crosslink density, decreased swelling ratio as well as minimal hydrolytic and lysozymic degradation, whilst addition of lysozymes to PEG based networks resulted in 70 wt.-% mass loss. PhS-crosslinked CT hydrogels displayed the highest loss (40 +/- 6 CFU%) of antibacterial activity upon incubation with Porphyromonas gingivalis, whilst respective extracts were tolerated by L929 mouse fibroblasts. △ Less

Submitted 5 December, 2016; v1 submitted 28 November, 2016; originally announced November 2016.

Comments: 3 Figures, 1 Table, 1 Supporting Scheme, Materials Letters 2016

Broadband, Lensless and Optomechanically Stabilised Coupling into Microfluidic Hollow-Core Photonic Crystal Fiber Using Glass Nanospike

Authors: Richard Zeltner, Shangran Xie, Riccardo Pennetta, Philip St. J. Russell

Abstract: We report a novel technique for launching broadband laser light into liquid-filled hollow-core photonic crystal fiber (HC-PCF). It uniquely offers self-alignment and self-stabilization via optomechanical trap** of a fused silica nanospike, fabricated by thermally tapering and chemically etching a single mode fiber into a tip diameter of 350 nm. We show that a trap** laser, delivering ~300 mW a… ▽ More We report a novel technique for launching broadband laser light into liquid-filled hollow-core photonic crystal fiber (HC-PCF). It uniquely offers self-alignment and self-stabilization via optomechanical trap** of a fused silica nanospike, fabricated by thermally tapering and chemically etching a single mode fiber into a tip diameter of 350 nm. We show that a trap** laser, delivering ~300 mW at 1064 nm, can be used to optically align and stably maintain the nanospike at the core center. Once this is done, a broadband supercontinuum beam (~575 to 1064 nm) can be efficiently and close to achromatically launched in the HC-PCF. The system is robust against liquid-flow in either direction inside the HC-PCF and the Fresnel back-reflections are reduced to negligible levels compared to free-space launching or butt-coupling. The results are of potential relevance for any application where the efficient delivery of broadband light into liquid-core waveguides is desired. △ Less

Submitted 15 November, 2016; originally announced November 2016.

Analytical formulation for the bend-loss in single-ring hollow-core photonic crystal fibers

Authors: Michael H. Frosz, Paul Roth, Mehmet C. Günendi, Philip St. J. Russell

Abstract: Understanding bend-loss in single-ring hollow-core photonic crystal fibers is becoming of increasing importance as the fibers enter practical applications. While purely numerical approaches are useful, there is a need for a simpler analytical formalism that provides physical insight and can be directly used in the design of PCFs with low bend-loss. We show theoretically and experimentally that a w… ▽ More Understanding bend-loss in single-ring hollow-core photonic crystal fibers is becoming of increasing importance as the fibers enter practical applications. While purely numerical approaches are useful, there is a need for a simpler analytical formalism that provides physical insight and can be directly used in the design of PCFs with low bend-loss. We show theoretically and experimentally that a wavelength-dependent critical bend radius exists below which the bend-loss reaches a maximum, and that this can be calculated from the structural parameters of a fiber using a simple analytical formula. This allows straightforward design of single-ring PCFs that are bend-insensitive for specified ranges of bend radius and wavelength. It also can be used to derive an expression for the bend radius that yields optimal higher-order mode suppression for a given fiber structure. △ Less

Submitted 8 November, 2016; originally announced November 2016.

Nonwoven scaffolds for bone regeneration

Authors: Elaine R. Durham, Giuseppe Tronci, Xuebin Yang, David J. Wood, Stephen J. Russell

Abstract: Develo** successful scaffolds requires clinicians to adopt a multidisciplinary approach in order to understand and stimulate the natural bone regeneration process. A variety of natural and synthetic biomaterials, including naturally extracted, chemically functionalised collagen and synthetic Poly(epsilon-caprolactone) (PCL), can be manufactured into fibres, enabling the formation of nonwoven sca… ▽ More Develo** successful scaffolds requires clinicians to adopt a multidisciplinary approach in order to understand and stimulate the natural bone regeneration process. A variety of natural and synthetic biomaterials, including naturally extracted, chemically functionalised collagen and synthetic Poly(epsilon-caprolactone) (PCL), can be manufactured into fibres, enabling the formation of nonwoven scaffolds. Many different nonwoven architectures and structural features can then be introduced, depending on the manufacturing parameters. This chapter introduces methods for producing scaffolds with appropriate pore sizes by means of electrospinning, and it outlines the opportunities that exist for other nonwoven manufacturing technologies in the development of biomimetic products. △ Less

Submitted 27 October, 2016; v1 submitted 23 October, 2016; originally announced October 2016.

Comments: 4 figures, 1 table, Biomedical Textiles for Orthopaedic and Surgical Applications (book) 2016

A Structurally Self-Assembled Peptide Nano-Architecture by One-Step Electrospinning

Authors: Robabeh Gharaei, Giuseppe Tronci, Robert P. W. Davies, Caroline Gough, Reem Alazragi, Parikshit Goswami, Stephen J. Russell

Abstract: Self-assembling peptides (SAPs) have shown to offer great promise in therapeutics and have the ability to undergo self-assembly and form ordered nanostructures. However SAP gels are often associated with inherent weak and transient mechanical properties and incorporation of them into polymeric matrices is a route to enhance their mechanical stability. The aim of this work was to incorporate P11-8… ▽ More Self-assembling peptides (SAPs) have shown to offer great promise in therapeutics and have the ability to undergo self-assembly and form ordered nanostructures. However SAP gels are often associated with inherent weak and transient mechanical properties and incorporation of them into polymeric matrices is a route to enhance their mechanical stability. The aim of this work was to incorporate P11-8 peptide (CH3COQQRFOWOFEQQNH2) within poly(epsilon-caprolactone) (PCL) fibrous webs via one-step electrospinning, aiming to establish the underlying relationships between spinning process, molecular peptide conformation, and material internal architecture. Electrospinning of PCL solutions (6% w/w) in hexafluoro-2-propanol (HFIP) containing up to 40 mg/ml P11-8 resulted in the formation of fibres in both nano- (10-100 nm) and submicron range (100-700 nm), in contrast to PCL only webs, which displayed a predominantly submicron fibre distribution. FTIR and CD spectroscopy on both PCL/peptide solutions and resulting electrospun webs revealed monomeric and beta-sheet secondary conformation, respectively, suggesting the occurrence of peptide self-assembly during electrospinning due to solvent evaporation. The peptide concentration (0 -> 40 mg/ml) was found to primarily affect the internal structure of the fabric at the nano-scale, whilst water as well as cell culture medium contact angles were dramatically decreased. Nearly no cytotoxic response (> 90% cell viability) was observed when L929 mouse fibroblasts were cultured in contact with electrospun peptide loaded samples. This novel nanofibrous architecture may be the basis for an interesting material platform for e.g. hard tissue repair, in light of the presence of the self assembled P11-8 in the PCL fibrous structure. △ Less

Submitted 23 October, 2016; originally announced October 2016.

Comments: Journal of Materials Chemistry B 2016

In silico modeling of the rheological properties of covalently crosslinked collagen triple helices

Authors: David A. Head, Giuseppe Tronci, Stephen J. Russell, David J. Wood

Abstract: Biomimetic hydrogels based on natural polymers are a promising class of biomaterial, mimicking the natural extra-cellular matrix of biological tissues and providing cues for cell attachment, proliferation and differentiation. With a view to providing an upstream method to guide subsequent experimental design, the aim of this study was to introduce a mathematical model that described the rheologica… ▽ More Biomimetic hydrogels based on natural polymers are a promising class of biomaterial, mimicking the natural extra-cellular matrix of biological tissues and providing cues for cell attachment, proliferation and differentiation. With a view to providing an upstream method to guide subsequent experimental design, the aim of this study was to introduce a mathematical model that described the rheological properties of a hydrogel system based on covalently crosslinked collagen triple helices. In light of their organization, such gels exhibit limited collagen bundling that cannot be described by existing fibril network models. The model presented here treats collagen triple helices as discrete semi-flexible polymers, permits full access to metrics for network microstructure, and should provide a comprehensive understanding of the parameter space associated with the development of such multi-functional materials. Triple helical hydrogel networks were experimentally obtained via reaction of type I collagen with both aromatic and aliphatic diacids. The complex modulus G* was found from rheological testing in linear shear and quantitatively compared to model predictions. In silico data from the computational model successfully described the experimental trends in hydrogel storage modulus with either (i) the concentration of collagen triple helices during crosslinking reaction or (ii) the type of crosslinking segment introduced in resulting hydrogel networks. This approach may pave the way to a step change in the rational design of biomimetic triple helical collagen systems with controlled multi-functionality. △ Less

Submitted 23 October, 2016; originally announced October 2016.

Comments: 9 figures, 1 scheme, 1 table, ACS Biomaterials Science and Engineering 2016

Protease-sensitive atelocollagen hydrogels promote healing in a diabetic wound model

Authors: Giuseppe Tronci, Jie Yin, Roisin A. Holmes, He Liang, Stephen J. Russell, David J. Wood

Abstract: The design of exudate-managing wound dressings is an established route to accelerated healing, although such design remains a challenge from material and manufacturing standpoints. Aiming towards the clinical translation of knowledge gained in vitro with highly swollen rat tail collagen hydrogels, this study investigated the healing capability in a diabetic mouse wound model of telopeptide-free, p… ▽ More The design of exudate-managing wound dressings is an established route to accelerated healing, although such design remains a challenge from material and manufacturing standpoints. Aiming towards the clinical translation of knowledge gained in vitro with highly swollen rat tail collagen hydrogels, this study investigated the healing capability in a diabetic mouse wound model of telopeptide-free, protease-inhibiting collagen networks. 4 vinylbenzylation and UV irradiation of type I atelocollagen (AC) led to hydrogel networks with chemical and macroscopic properties comparable to previous collagen analogues, attributable to similar lysine content and dichroic properties. After 4 days in vitro, hydrogels induced nearly 50 RFU% reduction in matrix metalloproteinase (MMP)-9 activity, whilst showing less than 20 wt.-% weight loss. After 20 days in vivo, dry networks promoted 99% closure of 10x10 mm full thickness wounds and accelerated neodermal tissue formation compared to Mepilex. This collagen system can be equipped with multiple, customisable properties and functions key to personalised chronic wound care. △ Less

Submitted 18 October, 2016; originally announced October 2016.

Comments: 30 pages, 1 scheme, 6 Figures, 2 Supporting Figures

Journal ref: Journal of Materials Chemistry B 2016

Generation of a VUV-to-visible Raman frequency comb in hydrogen-filled kagomé photonic crystal fiber

Authors: M. K. Mridha, D. Novoa, S. T. Bauerschmidt, A. Abdolvand, P. St. J. Russell

Abstract: We report the generation of a purely vibrational Raman comb, extending from the vacuum ultraviolet (184 nm) to the visible (478 nm), in hydrogen-filled kagomé-style photonic crystal fiber pumped at 266 nm. Stimulated Raman scattering and molecular modulation processes are enhanced by higher Raman gain in the ultraviolet. Owing to the pressure-tunable normal dispersion landscape of the fiber-gas sy… ▽ More We report the generation of a purely vibrational Raman comb, extending from the vacuum ultraviolet (184 nm) to the visible (478 nm), in hydrogen-filled kagomé-style photonic crystal fiber pumped at 266 nm. Stimulated Raman scattering and molecular modulation processes are enhanced by higher Raman gain in the ultraviolet. Owing to the pressure-tunable normal dispersion landscape of the fiber-gas system in the ultraviolet, higher-order anti-Stokes bands are generated preferentially in higher-order fiber modes. The results pave the way towards tunable fiber-based sources of deep- and vacuum ultraviolet light for applications in, e.g., spectroscopy and biomedicine. △ Less

Submitted 7 October, 2016; originally announced October 2016.

Comments: 4 pages, 5 figures, 1 table

Journal ref: Opt. Lett. 41, 2811 (2016)

Speaker Recognition for Children's Speech

Authors: Saeid Safavi, Maryam Najafian, Abualsoud Hanani, Martin J Russell, Peter Jancovic, Michael J Carey

Abstract: This paper presents results on Speaker Recognition (SR) for children's speech, using the OGI Kids corpus and GMM-UBM and GMM-SVM SR systems. Regions of the spectrum containing important speaker information for children are identified by conducting SR experiments over 21 frequency bands. As for adults, the spectrum can be split into four regions, with the first (containing primary vocal tract reson… ▽ More This paper presents results on Speaker Recognition (SR) for children's speech, using the OGI Kids corpus and GMM-UBM and GMM-SVM SR systems. Regions of the spectrum containing important speaker information for children are identified by conducting SR experiments over 21 frequency bands. As for adults, the spectrum can be split into four regions, with the first (containing primary vocal tract resonance information) and third (corresponding to high frequency speech sounds) being most useful for SR. However, the frequencies at which these regions occur are from 11% to 38% higher for children. It is also noted that subband SR rates are lower for younger children. Finally results are presented of SR experiments to identify a child in a class (30 children, similar age) and school (288 children, varying ages). Class performance depends on age, with accuracy varying from 90% for young children to 99% for older children. The identification rate achieved for a child in a school is 81%. △ Less

Submitted 23 September, 2016; originally announced September 2016.

Comments: INTERSPEECH 2012, Pages 1836-1839

Generation of Spectral Clusters in a Mixture of Noble and Raman-Active Gases

Authors: Pooria Hosseini, Amir Abdolvand, Philip St. J. Russell

Abstract: We report a novel scheme for the generation of dense clusters of Raman sidebands. The scheme uses a broadband-guiding hollow-core photonic crystal fiber (HC-PCF) filled with a mixture of H2, D2, and Xe for efficient interaction between the gas mixture and a green laser pump pulse (532 nm, 1 ns) of only 5 uJ energy. This results in the generation from noise of more than 135 ro-vibrational Raman sid… ▽ More We report a novel scheme for the generation of dense clusters of Raman sidebands. The scheme uses a broadband-guiding hollow-core photonic crystal fiber (HC-PCF) filled with a mixture of H2, D2, and Xe for efficient interaction between the gas mixture and a green laser pump pulse (532 nm, 1 ns) of only 5 uJ energy. This results in the generation from noise of more than 135 ro-vibrational Raman sidebands covering the visible spectral region with an average spacing of only 2 THz. Such a spectrally dense and compact fiber-based source is ideal for applications where closely spaced narrow-band laser lines with high spectral power density are required, such as in spectroscopy and sensing. When the HC-PCF is filled with a H2-D2 mixture the Raman comb spans the spectral region from the deep UV (280 nm) to the near infrared (1000 nm). △ Less

Submitted 16 September, 2016; originally announced September 2016.

Comments: 6 pages, 4 figures, 1 table

Journal ref: Opt. Lett. 41, 5543-5546 (2016)

Measurement of the Drift Velocity and Transverse Diffusion of Electrons in Liquid Xenon with the EXO-200 Detector

Authors: EXO-200 Collaboration, :, J. B. Albert, P. S. Barbeau, D. Beck, V. Belov, M. Breidenbach, T. Brunner, A. Burenkov, G. F. Cao, W. R. Cen, C. Chambers, B. Cleveland, M. Coon, A. Craycraft, T. Daniels, M. Danilov, S. J. Daugherty, J. Daughhetee, J. Davis, S. Delaquis, A. Der Mesrobian-Kabakian, R. DeVoe, T. Didberidze, J. Dilling , et al. (63 additional authors not shown)

Abstract: The EXO-200 Collaboration is searching for neutrinoless double beta decay using a liquid xenon (LXe) time projection chamber. This measurement relies on modeling the transport of charge deposits produced by interactions in the LXe to allow discrimination between signal and background events. Here we present measurements of the transverse diffusion constant and drift velocity of electrons at drift… ▽ More The EXO-200 Collaboration is searching for neutrinoless double beta decay using a liquid xenon (LXe) time projection chamber. This measurement relies on modeling the transport of charge deposits produced by interactions in the LXe to allow discrimination between signal and background events. Here we present measurements of the transverse diffusion constant and drift velocity of electrons at drift fields between 20~V/cm and 615~V/cm using EXO-200 data. At the operating field of 380~V/cm EXO-200 measures a drift velocity of 1.705$_{-0.010}^{+0.014}$~mm/$μ$s and a transverse diffusion coefficient of 55$\pm$4~cm$^2$/s. △ Less

Submitted 22 March, 2017; v1 submitted 14 September, 2016; originally announced September 2016.

Comments: 9 pages, 7 figures, added minor clarifications recommended by the reviewer on E-field non-uniformities, minor edits to formatting of figures to conform with journal requirements

Sha** frequency correlations of ultrafast pulse-pumped modulational instability in gas-filled hollow-core PCF

Authors: Martin A. Finger, Nicolas Y. Joly, Philip St. J. Russell, Maria V. Chekhova

Abstract: We vary the time-frequency mode structure of ultrafast pulse-pumped modulational instability (MI) twin beams in an argon-filled hollow-core kagomé-style PCF by adjusting the pressure, pump pulse chirp, fiber length and parametric gain. Compared to solid-core systems, the pressure dependent dispersion landscape brings increased flexibility to the tailoring of frequency correlations and we demonstra… ▽ More We vary the time-frequency mode structure of ultrafast pulse-pumped modulational instability (MI) twin beams in an argon-filled hollow-core kagomé-style PCF by adjusting the pressure, pump pulse chirp, fiber length and parametric gain. Compared to solid-core systems, the pressure dependent dispersion landscape brings increased flexibility to the tailoring of frequency correlations and we demonstrate that the pump pulse chirp can be used to tune the joint spectrum of femtosecond-pumped sources. We also characterize the resulting mode content, not only by measuring the multimode second-order correlation function g(2) but also by directly reconstructing the shapes and weights of time-frequency Schmidt (TFS) modes. We show that the number of modes directly influences the shot-to-shot pulse-energy and spectral-shape fluctuations in MI. Using this approach we control and monitor the number of TFS modes within the range from 1.3 to 4 using only a single fiber. △ Less

Submitted 5 May, 2017; v1 submitted 1 September, 2016; originally announced September 2016.

Journal ref: Phys. Rev. A 95, 053814 (2017)

Stochastic transport in the presence of spatial disorder: fluctuation-induced corrections to homogenization

Authors: Matthew J. Russell, Oliver E. Jensen, Tobias Galla

Abstract: Motivated by uncertainty quantification in natural transport systems, we investigate an individual-based transport process involving particles undergoing a random walk along a line of point sinks whose strengths are themselves independent random variables. We assume particles are removed from the system via first-order kinetics. We analyse the system using a hierarchy of approaches when the sinks… ▽ More Motivated by uncertainty quantification in natural transport systems, we investigate an individual-based transport process involving particles undergoing a random walk along a line of point sinks whose strengths are themselves independent random variables. We assume particles are removed from the system via first-order kinetics. We analyse the system using a hierarchy of approaches when the sinks are sparsely distributed, including a stochastic homogenization approximation that yields explicit predictions for the extrinsic disorder in the stationary state due to sink strength fluctuations. The extrinsic noise induces long-range spatial correlations in the particle concentration, unlike fluctuations due to the intrinsic noise alone. Additionally, the mean concentration profile, averaged over both intrinsic and extrinsic noise, is elevated compared with the corresponding profile from a uniform sink distribution, showing that the classical homogenization approximation can be a biased estimator of the true mean. △ Less

Submitted 21 August, 2016; v1 submitted 17 June, 2016; originally announced June 2016.

Comments: 16 pages, 8 figures

Journal ref: Phys. Rev. E 94, 042121 (2016)

The Auslander-Gruson-Jensen Recollement

Authors: Jeremy Russell, Samuel Dean

Abstract: For any ring $R$, the Auslander-Gruson-Jensen functor is the exact contravariant functor $$\textsf{D}_A:\textsf{fp}(\textsf{Mod}(R),\textsf{Ab})\longrightarrow(\textsf{mod}(R^{op}),\textsf{Ab})$$ sending representable functors $(X,\hspace{0.05cm}\underline{\ \ }\hspace{0.1cm} )$ to tensor functors $X\otimes\hspace{0.05cm}\underline{\ \ }\hspace{0.1cm} $. We show that this functor admits a fully fa… ▽ More For any ring $R$, the Auslander-Gruson-Jensen functor is the exact contravariant functor $$\textsf{D}_A:\textsf{fp}(\textsf{Mod}(R),\textsf{Ab})\longrightarrow(\textsf{mod}(R^{op}),\textsf{Ab})$$ sending representable functors $(X,\hspace{0.05cm}\underline{\ \ }\hspace{0.1cm} )$ to tensor functors $X\otimes\hspace{0.05cm}\underline{\ \ }\hspace{0.1cm} $. We show that this functor admits a fully faithful left adjoint $\textsf{D}_L$ and a fully faithful right adjoint $\textsf{D}_R$. The left adjoint $$\textsf{D}_L\:(\textsf{mod}(R^{op}),\textsf{Ab})\longrightarrow \textsf{fp}(\textsf{Mod}(R),\textsf{Ab})$$ induces an equivalence of categories $$\frac{\textsf{fp}(\textsf{Mod}(R),\textsf{Ab})}{\{F\ |\ \textsf{D}_A F=0\}}\cong(\textsf{mod}(R^{op}),\textsf{Ab})^{op}$$ where $\{F \ |\ \textsf{D}_A F=0\}$ is the Serre subcategory of $\textsf{fp}(\textsf{Mod}(R),\textsf{Ab})$ consisting of all functors $F$ arising from pure exact sequences. As a result, the functor $\textsf{D}_A$ is seen to be a Serre localization functor. The right adjoint $$\textsf{D}_R:(\textsf{mod}(R^{op}),\textsf{Ab})\longrightarrow \textsf{fp}(\textsf{Mod}(R),\textsf{Ab})$$ together with $\textsf{D}_A$ restricts to the well known Auslander-Gruson-Jensen duality. △ Less

Submitted 23 February, 2024; v1 submitted 13 June, 2016; originally announced June 2016.

Comments: 11 pages. Updating to match published version

An Optimal Energy Estimator to Reduce Correlated Noise for the EXO-200 Light Readout

Authors: EXO-200 Collaboration, :, C. G. Davis, C. Hall, J. B. Albert, P. S. Barbeau, D. Beck, V. Belov, M. Breidenbach, T. Brunner, A. Burenkov, G. F. Cao, W. R. Cen, C. Chambers, B. Cleveland, M. Coon, A. Craycraft, T. Daniels, M. Danilov, S. J. Daugherty, J. Davis, S. Delaquis, A. Der Mesrobian-Kabakian, R. DeVoe, T. Didberidze , et al. (63 additional authors not shown)

Abstract: The energy resolution of the EXO-200 detector is limited by electronics noise in the measurement of the scintillation response. Here we present a new technique to extract optimal scintillation energy measurements for signals split across multiple channels in the presence of correlated noise. The implementation of these techniques improves the energy resolution of the detector at the neutrinoless d… ▽ More The energy resolution of the EXO-200 detector is limited by electronics noise in the measurement of the scintillation response. Here we present a new technique to extract optimal scintillation energy measurements for signals split across multiple channels in the presence of correlated noise. The implementation of these techniques improves the energy resolution of the detector at the neutrinoless double beta decay Q-value from $\left[1.9641\pm 0.0039\right]\%$ to $\left[1.5820\pm 0.0044\right]\%$. △ Less

Submitted 22 March, 2017; v1 submitted 20 May, 2016; originally announced May 2016.

Comments: 21 pages, 8 figures, 1 table

Journal ref: JINST 11 P07015 (2016)

Simulations of the Mg II k and Ca II 8542 lines from an Alfvén Wave-heated flare chromosphere

Authors: Graham S. Kerr, Lyndsay Fletcher, Alexander J. B. Russell, Joel C. Allred

Abstract: We use radiation hydrodynamic simulations to examine two models of solar flare chromospheric heating: Alfvén wave dissipation and electron beam collisional losses. Both mechanisms are capable of strong chromospheric heating, and we show that the distinctive atmospheric evolution in the mid-to-upper chromosphere results in Mg II k-line emission that should be observably different between wave-heate… ▽ More We use radiation hydrodynamic simulations to examine two models of solar flare chromospheric heating: Alfvén wave dissipation and electron beam collisional losses. Both mechanisms are capable of strong chromospheric heating, and we show that the distinctive atmospheric evolution in the mid-to-upper chromosphere results in Mg II k-line emission that should be observably different between wave-heated and beam-heated simulations. We also present Ca II 8542A profiles which are formed slightly deeper in the chromosphere. The Mg II k-line profiles from our wave-heated simulation are quite different from those from a beam-heated model and are more consistent with IRIS observations. The predicted differences between the Ca II 8542A in the two models are small. We conclude that careful observational and theoretical study of lines formed in the mid-to-upper chromosphere holds genuine promise for distinguishing between competing models for chromospheric heating in flares. △ Less

Submitted 19 May, 2016; originally announced May 2016.

Comments: 17 pages, 9 figures, submitted for peer-review

RF-dressed Rydberg atoms in hollow-core fibres

Authors: Christian Veit, Georg Epple, Harald Kübler, Tijmen G. Euser, Philip St. J. Russell, Robert Löw

Abstract: The giant electro-optical response of Rydberg atoms manifests itself in the emergence of sidebands in the Rydberg excitation spectrum if the atom is exposed to a radio-frequency (RF) electric field. Here we report on the study of RF-dressed Rydberg atoms inside hollow-core photonic crystal fibres (HC-PCF), a system that enables the use of low modulation voltages and offers the prospect of miniatur… ▽ More The giant electro-optical response of Rydberg atoms manifests itself in the emergence of sidebands in the Rydberg excitation spectrum if the atom is exposed to a radio-frequency (RF) electric field. Here we report on the study of RF-dressed Rydberg atoms inside hollow-core photonic crystal fibres (HC-PCF), a system that enables the use of low modulation voltages and offers the prospect of miniaturised vapour-based electro-optical devices. Narrow spectroscopic features caused by the RF field are observed for modulation frequencies up to 500 MHz. △ Less

Submitted 29 March, 2016; originally announced March 2016.

A Spatially-Varying Stochastic Differential Equation Model for Animal Movement

Authors: James C. Russell, Ephraim M. Hanks, Murali Haran, David P. Hughes

Abstract: Animal movement exhibits complex behavior which can be influenced by unobserved environmental conditions. We propose a model which allows for a spatially-varying movement rate and spatially-varying drift through a semiparametric potential surface and a separate motility surface. These surfaces are embedded in a stochastic differential equation framework which allows for complex animal movement pat… ▽ More Animal movement exhibits complex behavior which can be influenced by unobserved environmental conditions. We propose a model which allows for a spatially-varying movement rate and spatially-varying drift through a semiparametric potential surface and a separate motility surface. These surfaces are embedded in a stochastic differential equation framework which allows for complex animal movement patterns in space. The resulting model is used to analyze the spatially-varying behavior of ants to provide insight into the spatial structure of ant movement in the nest. △ Less

Submitted 26 February, 2017; v1 submitted 24 March, 2016; originally announced March 2016.