-
Decoupling and tuning competing effects of different types of defects on flux creep in irradiated YBa$_{2}$Cu$_{3}$O$_{7-δ}$ coated conductors
Authors:
S. Eley,
M. Leroux,
M. W. Rupich,
D. J. Miller,
H. Sheng,
P. M. Niraula,
A. Kayani,
U. Welp,
W. -K. Kwok,
L. Civale
Abstract:
YBa$_{2}$Cu$_{3}$O$_{7-δ}$ coated conductors (CCs) have achieved high critical current densities ($\textit{J}_{c}$) that can be further increased through the introduction of additional defects using particle irradiation. However, these gains are accompanied by increases in the flux creep rate, a manifestation of competition between the different types of defects. Here, we study this competition to…
▽ More
YBa$_{2}$Cu$_{3}$O$_{7-δ}$ coated conductors (CCs) have achieved high critical current densities ($\textit{J}_{c}$) that can be further increased through the introduction of additional defects using particle irradiation. However, these gains are accompanied by increases in the flux creep rate, a manifestation of competition between the different types of defects. Here, we study this competition to better understand how to design pinning landscapes that simultaneously increase $\textit{J}_{c}$ and reduce creep. CCs grown by metal organic deposition show non-monotonic changes in the temperature-dependent creep rate, $\textit{S}(\textit{T})$. Notably, in low fields, there is a conspicuous dip to low $\textit{S}$ as temperature ($\textit{T}$) increases from ~20 K to ~65 K. Oxygen-, proton-, and Au-irradiation substantially increase $\textit{S}$ in this temperature range. Focusing on an oxygen-irradiated CC, we investigate the contribution of different types of irradiation-induced defects to the flux creep rate. Specifically, we study $\textit{S}(\textit{T})$ as we tune the relative density of point defects to larger defects by annealing both an as-grown and an irradiated CC in O$_{2}$ at temperatures $\textit{T}_{A}$ = 250$°$C to 600$°$C. We observe a steady decrease in $\textit{S}$($\textit{T}$ > 20 K) with increasing $\textit{T}_{A}$, unveiling the role of pre-existing nanoparticle precipitates in creating the dip in $\textit{S}(\textit{T})$ and point defects and clusters in increasing $\textit{S}$ at intermediate temperatures.
△ Less
Submitted 6 June, 2016; v1 submitted 13 February, 2016;
originally announced February 2016.
-
Rapid Doubling of the Critical Current of YBa$_2$Cu$_3$O$_{7-δ}$ Coated Conductors for Viable High-Speed Industrial Processing
Authors:
Maxime Leroux,
Karen J. Kihlstrom,
Sigrid Holleis,
Martin W. Rupich,
Srivatsan Sathyamurthy,
Steven Fleshler,
Hua** Sheng,
Dean J. Miller,
Serena Eley,
Leonardo Civale,
Asghar Kayani,
Prashantamani M. Niraula,
Ulrich Welp,
Wai-Kwong Kwok
Abstract:
We demonstrate that 3.5-MeV oxygen irradiation can markedly enhance the in-field critical current of commercial 2nd generation superconducting tapes with an exposure time of just one second per 0.8 cm2. The speed demonstrated here is now at the level required for an industrial reel-to-reel post-processing. The irradiation is made on production line samples through the protective silver coating and…
▽ More
We demonstrate that 3.5-MeV oxygen irradiation can markedly enhance the in-field critical current of commercial 2nd generation superconducting tapes with an exposure time of just one second per 0.8 cm2. The speed demonstrated here is now at the level required for an industrial reel-to-reel post-processing. The irradiation is made on production line samples through the protective silver coating and does not require any modification of the growth process. From TEM imaging, we identify small clusters as the main source of increased vortex pinning.
△ Less
Submitted 24 September, 2015;
originally announced September 2015.
-
Simulation of the vortex dynamics in a real pinning landscape of YBa$_2$Cu$_3$O$_{7-δ}$ coated conductors
Authors:
I. A. Sadovskyy,
A. E. Koshelev,
A. Glatz,
V. Ortalan,
M. W. Rupich,
M. Leroux
Abstract:
The ability of high-temperature superconductors (HTSs) to carry very large currents with almost no dissipation makes them irreplaceable for high-power applications. The development and further improvement of HTS-based cables requires an in-depth understanding of the superconducting vortex dynamics in presence of complex pinning landscapes. We present a critical current analysis of a real HTS sampl…
▽ More
The ability of high-temperature superconductors (HTSs) to carry very large currents with almost no dissipation makes them irreplaceable for high-power applications. The development and further improvement of HTS-based cables requires an in-depth understanding of the superconducting vortex dynamics in presence of complex pinning landscapes. We present a critical current analysis of a real HTS sample in a magnetic field by combining state-of-the-art large-scale Ginzburg-Landau simulations with reconstructive three-dimensional scanning transmission electron microscopy tomography of the pinning landscape in Dy-doped YBa$_2$Cu$_3$O$_{7-δ}$. This methodology provides a unique look at the vortex dynamics in the presence of a complex pinning landscape, responsible for the high current-carrying capacity characteristic of commercial HTS wires. Our method demonstrates very good functional and quantitative agreement of the critical current between simulation and experiment, providing a new predictive tool for HTS wires design.
△ Less
Submitted 23 December, 2015; v1 submitted 15 September, 2015;
originally announced September 2015.
-
Doubling the Critical Current Density of High Temperature Superconducting Coated Conductors through Proton Irradiation
Authors:
Y. Jia,
M. LeRoux,
D. J. Miller,
J. G. Wen,
W. K. Kwok,
U. Welp,
M. W. Rupich,
X. Li,
S. Sathyamurthy,
S. Fleshler,
A. P. Malozemoff,
A. Kayani,
O. Ayala-Valenzuela,
L. Civale
Abstract:
The in-field critical current of commercial YBa2Cu3O7 coated conductors can be substantially enhanced by post-fabrication irradiation with 4 MeV protons. Irradiation to a fluence of 8x10^16 p/cm^2 induces a near doubling of the critical current in fields of 6 T || c at a temperature of 27 K, a field and temperature range of interest for applications such as rotating machinery. A mixed pinning land…
▽ More
The in-field critical current of commercial YBa2Cu3O7 coated conductors can be substantially enhanced by post-fabrication irradiation with 4 MeV protons. Irradiation to a fluence of 8x10^16 p/cm^2 induces a near doubling of the critical current in fields of 6 T || c at a temperature of 27 K, a field and temperature range of interest for applications such as rotating machinery. A mixed pinning landscape of preexisting precipitates and twin boundaries and small, finely dispersed irradiation induced defects may account for the improved vortex pinning in high magnetic fields. Our data indicate that there is significant head-room for further enhancements.
△ Less
Submitted 2 July, 2013;
originally announced July 2013.
-
Mechanisms of weak thickness dependence of the critical current density in strong pinning ex situ metal-organic-deposition route YBa2Cu3O7-x coated conductors
Authors:
S. I. Kim,
A. Gurevich,
X. Song,
X. Li,
W. Zhang,
T. Kodenkandath,
M. W. Rupich,
T. G. Holesinger,
D. C. Larbalestier
Abstract:
We report on the thickness dependence of the superconducting characteristics including critical current Ic, critical current density Jc, transition temperature Tc, irreversibility field Hirr, bulk pinning force plot Fp(H), and the normal state resistivity curve measured after successive ion milling of ~ 1 um thick high Ic YBa2Cu3O7-x films made by an ex situ metal-organic deposition process on N…
▽ More
We report on the thickness dependence of the superconducting characteristics including critical current Ic, critical current density Jc, transition temperature Tc, irreversibility field Hirr, bulk pinning force plot Fp(H), and the normal state resistivity curve measured after successive ion milling of ~ 1 um thick high Ic YBa2Cu3O7-x films made by an ex situ metal-organic deposition process on Ni-W rolling-assisted biaxially textured substrates (RABiTS). Contrary to many recent data, mostly on in situ pulsed laser deposition (PLD) films, which show strong depression of Jc with increasing film thickness t, our films exhibit only a weak dependence of Jc on t. The two better textured samples had full cross-section average Jc,avg(77K,0T) ~ 4 MA/cm2 near the buffer layer interface and ~3 MA/cm2 at full thickness, despite significant current blocking due to ~30% porosity in the film. Taking account of the thickness dependence of the porosity, we estimate that the local, vortex-pinning current density is essentially independent of thickness, while accounting for the additional current-blocking effects of grain boundaries leads to local, vortex-pinning Jc values well above 5 MA/cm2. Such high local Jc values are produced by strong three-dimensional vortex pinning which subdivides vortex lines into weakly coupled segments much shorter than the film thickness.
△ Less
Submitted 24 May, 2006;
originally announced May 2006.
