-
A Comprehensive Review of Coastal Compound Flooding Literature
Authors:
Joshua Green,
Ivan D. Haigh,
Niall Quinn,
Jeff Neal,
Thomas Wahl,
Melissa Wood,
Dirk Eilander,
Marleen de Ruiter,
Philip Ward,
Paula Camus
Abstract:
Compound flooding, where the combination or successive occurrence of two or more flood drivers leads to an extreme impact, can greatly exacerbate the adverse consequences associated with flooding in coastal regions. This paper reviews the practices and trends in coastal compound flood research methodologies and applications, as well as synthesizes key findings at regional and global scales. System…
▽ More
Compound flooding, where the combination or successive occurrence of two or more flood drivers leads to an extreme impact, can greatly exacerbate the adverse consequences associated with flooding in coastal regions. This paper reviews the practices and trends in coastal compound flood research methodologies and applications, as well as synthesizes key findings at regional and global scales. Systematic review is employed to construct a literature database of 271 studies relevant to compound flood hazards in a coastal context. This review explores the types of compound flood events, their mechanistic processes, and synthesizes the definitions and terms exhibited throughout the literature. Considered in the review are six flood drivers (fluvial, pluvial, coastal, groundwater, damming/dam failure, and tsunami) and five precursor events and environmental conditions (soil moisture, snow, temp/heat, fire, and drought). Furthermore, this review summarizes the trends in research methodology, examines the wide range of study applications, and considers the influences of climate change and urban environments. Finally, this review highlights the knowledge gaps in compound flood research and discusses the implications of review findings on future practices. Our five recommendations for future compound flood research are to: 1) adopt consistent definitions, terminology, and approaches; 2) expand the geographic coverage of research; 3) pursue more inter-comparison projects; 4) develop modelling frameworks that better couple dynamic earth systems; and 5) design urban and coastal infrastructure with compound flooding in mind. We hope this review will help to enhance understanding of compound flooding, guide areas for future research focus, and close knowledge gaps.
△ Less
Submitted 28 March, 2024;
originally announced April 2024.
-
Scalable fabrication of bijel films via continuous flow slit-coating
Authors:
Henrik Siegel,
Mariska de Ruiter,
Cos M. Hesseling,
Georgios Athanasiou,
Martin F. Haase
Abstract:
Nanocomposite membranes are an emerging filtration material in the production of clean water. Recently, the fabrication of porous nanocomposite membranes via solvent transfer induced phase separation (STrIPS) was introduced. During STrIPS, the phase separation of two immiscible liquids is arrested by the attachment of nanoparticles at the liquid-liquid interface, generating a porous particle-stabi…
▽ More
Nanocomposite membranes are an emerging filtration material in the production of clean water. Recently, the fabrication of porous nanocomposite membranes via solvent transfer induced phase separation (STrIPS) was introduced. During STrIPS, the phase separation of two immiscible liquids is arrested by the attachment of nanoparticles at the liquid-liquid interface, generating a porous particle-stabilized membrane template. STrIPS nanocomposite membranes, however, have so far only been produced as hollow fibers. To overcome this, we designed a roll-to-roll (R2R)-process for the continuous fabrication of flat-sheet nanocomposite membranes via STrIPS. We produce the STrIPS membrane by printing the membrane precursor on a carrier substrate. This allows for the continuous collection of STrIPS membranes with control over the membrane dimensions. Contact angle measurements elucidate the wetting dynamics of the STrIPS membrane on the substrate. Furthermore, we demonstrate control over the membrane pore structure by varying the precusor liquid composition and by changing the particle modification and loading in the membrane. With this, the R2R-approach may stimulate further advancements in the fabrication of flat-sheet nanocomposite membranes via STrIPS.
△ Less
Submitted 30 January, 2023;
originally announced January 2023.
-
First release of Apertif imaging survey data
Authors:
Elizabeth A. K. Adams,
B. Adebahr,
W. J. G. de Blok,
H. Denes,
K. M. Hess,
J. M. van der Hulst,
A. Kutkin,
D. M. Lucero,
R. Morganti,
V. A. Moss,
T. A. Oosterloo,
E. Orru,
R. Schulz,
A. S. van Amesfoort,
A. Berger,
O. M. Boersma,
M. Bouwhuis,
R. van den Brink,
W. A. van Cappellen,
L. Connor,
A. H. W. M. Coolen,
S. Damstra,
G. N. J. van Diepen,
T. J. Dijkema,
N. Ebbendorf
, et al. (34 additional authors not shown)
Abstract:
(Abridged) Apertif is a phased-array feed system for WSRT, providing forty instantaneous beams over 300 MHz of bandwidth. A dedicated survey program started on 1 July 2019, with the last observations taken on 28 February 2022. We describe the release of data products from the first year of survey operations, through 30 June 2020. We focus on defining quality control metrics for the processed data…
▽ More
(Abridged) Apertif is a phased-array feed system for WSRT, providing forty instantaneous beams over 300 MHz of bandwidth. A dedicated survey program started on 1 July 2019, with the last observations taken on 28 February 2022. We describe the release of data products from the first year of survey operations, through 30 June 2020. We focus on defining quality control metrics for the processed data products. The Apertif imaging pipeline, Apercal, automatically produces non-primary beam corrected continuum images, polarization images and cubes, and uncleaned spectral line and dirty beam cubes for each beam of an Apertif imaging observation. For this release, processed data products are considered on a beam-by-beam basis within an observation. We validate the continuum images by using metrics that identify deviations from Gaussian noise in the residual images. If the continuum image passes validation, we release all processed data products for a given beam. We apply further validation to the polarization and line data products. We release all raw observational data from the first year of survey observations, for a total of 221 observations of 160 independent target fields, covering approximately one thousand square degrees of sky. Images and cubes are released on a per beam basis, and 3374 beams are released. The median noise in the continuum images is 41.4 uJy/bm, with a slightly lower median noise of 36.9 uJy/bm in the Stokes V polarization image. The median angular resolution is 11.6"/sin(Dec). The median noise for all line cubes, with a spectral resolution of 36.6 kHz, is 1.6 mJy/bm, corresponding to a 3-sigma HI column density sensitivity of 1.8 x 10^20 atoms cm^-2 over 20 km/s (for a median angular resolution of 24" x 15"). We also provide primary beam images for each individual Apertif compound beam. The data are made accessible using a Virtual Observatory interface.
△ Less
Submitted 22 November, 2022; v1 submitted 10 August, 2022;
originally announced August 2022.
-
The Apertif science verification campaign - Characteristics of polarised radio sources
Authors:
B. Adebahr,
A. Berger,
E. A. K. Adams,
K. M. Hess,
W. J. G. de Blok,
H. Dénes,
V. A. Moss,
R. Schulz,
J. M. van der Hulst,
L. Connor,
S. Damstra,
B. Hut,
M. V. Ivashina,
G. M. Loose,
Y. Maan,
A. Mika,
H. Mulder,
M. J. Norden,
L. C. Oostrum,
E. Orrú,
M. Ruiter,
R. Smits,
W. A. van Cappellen,
J. van Leeuwen,
N. J. Vermaas
, et al. (2 additional authors not shown)
Abstract:
We analyse five early science datasets from the APERture Tile in Focus (Apertif) phased array feed system to verify the polarisation capabilities of Apertif in view of future larger data releases. We aim to characterise the source population of the polarised sky in the L-Band using polarised source information in combination with IR and optical data. We use automatic routines to generate full fiel…
▽ More
We analyse five early science datasets from the APERture Tile in Focus (Apertif) phased array feed system to verify the polarisation capabilities of Apertif in view of future larger data releases. We aim to characterise the source population of the polarised sky in the L-Band using polarised source information in combination with IR and optical data. We use automatic routines to generate full field-of-view Q- and U-cubes and perform RM-Synthesis, source finding, and cross-matching with published radio, optical, and IR data to generate polarised source catalogues. SED-fitting routines were used to determine photometric redshifts, star-formation rates, and galaxy masses. IR colour information was used to classify sources as AGN or star-forming-dominated and early- or late-type. We surveyed an area of 56deg$^2$ and detected 1357 polarised source components in 1170 sources. The fraction of polarised sources is 10.57% with a median fractional polarisation of 4.70$\pm$0.14%. We confirmed the reliability of the Apertif measurements by comparing them with polarised cross-identified NVSS sources. Average RMs of the individual fields lie within the error of the best Milky Way foreground measurements. All of our polarised sources were found to be dominated by AGN activity in the radio regime with most of them being radio-loud (79%) and of the FRII class (87%). The host galaxies of our polarised source sample are dominated by intermediate disc and star-forming disc galaxies. The contribution of star formation to the radio emission is on the order of a few percent for $\approx$10% of the polarised sources while for $\approx$90% it is completely dominated by the AGN. We do not see any change in fractional polarisation for different star-formation rates of the AGN host galaxies.
△ Less
Submitted 31 March, 2022;
originally announced March 2022.
-
Apertif, Phased Array Feeds for the Westerbork Synthesis Radio Telescope
Authors:
W. A. van Cappellen,
T. A. Oosterloo,
M. A. W. Verheijen,
E. A. K. Adams,
B. Adebahr,
R. Braun,
K. M. Hess,
H. Holties,
J. M. van der Hulst,
B. Hut,
E. Kooistra,
J. van Leeuwen,
G. M. Loose,
R. Morganti,
V. A. Moss,
E. Orrú,
M. Ruiter,
A. P. Schoenmakers,
N. J. Vermaas,
S. J. Wijnholds,
A. S. van Amesfoort,
M. J. Arts,
J. J. Attema,
L. Bakker,
C. G. Bassa
, et al. (65 additional authors not shown)
Abstract:
We describe the APERture Tile In Focus (Apertif) system, a phased array feed (PAF) upgrade of the Westerbork Synthesis Radio Telescope which has transformed this telescope into a high-sensitivity, wide field-of-view L-band imaging and transient survey instrument. Using novel PAF technology, up to 40 partially overlap** beams can be formed on the sky simultaneously, significantly increasing the s…
▽ More
We describe the APERture Tile In Focus (Apertif) system, a phased array feed (PAF) upgrade of the Westerbork Synthesis Radio Telescope which has transformed this telescope into a high-sensitivity, wide field-of-view L-band imaging and transient survey instrument. Using novel PAF technology, up to 40 partially overlap** beams can be formed on the sky simultaneously, significantly increasing the survey speed of the telescope. With this upgraded instrument, an imaging survey covering an area of 2300 deg2 is being performed which will deliver both continuum and spectral line data sets, of which the first data has been publicly released. In addition, a time domain transient and pulsar survey covering 15,000 deg2 is in progress. An overview of the Apertif science drivers, hardware and software of the upgraded telescope is presented, along with its key performance characteristics.
△ Less
Submitted 30 September, 2021; v1 submitted 29 September, 2021;
originally announced September 2021.
-
Dual-frequency single-pulse study of PSR B0950+08
Authors:
A. V. Bilous,
J. M. Griessmeier,
T. Pennucci,
Z. Wu,
L. Bondonneau,
V. Kondratiev,
J. van Leeuwen,
Y. Maan,
L. Connor,
L. C. Oostrum,
E. Petroff,
J. P. W. Verbiest,
D. Vohl,
J. W. McKee,
G. Shaifullah,
G. Theureau,
O. M. Ulyanov,
B. Cecconi,
A. H. Coolen,
S. Corbel,
S. Damstra,
H. Denes,
J. N. Girard,
B. Hut,
M. Ivashina
, et al. (11 additional authors not shown)
Abstract:
PSR B0950+08 is a bright non-recycled pulsar whose single-pulse fluence variability is reportedly large. Based on observations at two widely separated frequencies, 55 MHz (NenuFAR) and 1.4 GHz (Westerbork Synthesis Radio Telescope), we review the properties of these single pulses. We conclude that they are more similar to ordinary pulses of radio emission than to a special kind of short and bright…
▽ More
PSR B0950+08 is a bright non-recycled pulsar whose single-pulse fluence variability is reportedly large. Based on observations at two widely separated frequencies, 55 MHz (NenuFAR) and 1.4 GHz (Westerbork Synthesis Radio Telescope), we review the properties of these single pulses. We conclude that they are more similar to ordinary pulses of radio emission than to a special kind of short and bright Giant Pulses, observed from only a handful of pulsars. We argue that temporal variation of properties of interstellar medium along the line of sight to this nearby pulsar, namely the fluctuating size of decorrelation bandwidth of diffractive scintillation makes important contribution to observed single-pulse fluence variability. We further present interesting structures in the low-frequency single-pulse spectra that resemble the "sad trombones" seen in Fast Radio Bursts (FRBs); although for PSR B0950+08 the upward frequency drift is also routinely present. We explain these spectral features with radius-to-frequency map**, similar to the model developed by Wang et al. (2019) for FRBs. Finally, we speculate that microsecond-scale fluence variability of the general pulsar population remains poorly known, and that its further study may bring important clues about the nature of FRBs.
△ Less
Submitted 26 November, 2021; v1 submitted 17 September, 2021;
originally announced September 2021.
-
Sub-arcsecond imaging with the International LOFAR Telescope: II. Completion of the LOFAR Long-Baseline Calibrator Survey
Authors:
Neal Jackson,
Shruti Badole,
John Morgan,
Rajan Chhetri,
Kaspars Prusis,
Atvars Nikolajevs,
Leah Morabito,
Michiel Brentjens,
Frits Sweijen,
Marco Iacobelli,
Emanuela Orrù,
J. Sluman,
R. Blaauw,
H. Mulder,
P. van Dijk,
Sean Mooney,
Adam Deller,
Javier Moldon,
J. R. Callingham,
Jeremy Harwood,
Martin Hardcastle,
George Heald,
Alexander Drabent,
J. P. McKean,
A. Asgekar
, et al. (47 additional authors not shown)
Abstract:
The Low-Frequency Array (LOFAR) Long-Baseline Calibrator Survey (LBCS) was conducted between 2014 and 2019 in order to obtain a set of suitable calibrators for the LOFAR array. In this paper we present the complete survey, building on the preliminary analysis published in 2016 which covered approximately half the survey area. The final catalogue consists of 30006 observations of 24713 sources in t…
▽ More
The Low-Frequency Array (LOFAR) Long-Baseline Calibrator Survey (LBCS) was conducted between 2014 and 2019 in order to obtain a set of suitable calibrators for the LOFAR array. In this paper we present the complete survey, building on the preliminary analysis published in 2016 which covered approximately half the survey area. The final catalogue consists of 30006 observations of 24713 sources in the northern sky, selected for a combination of high low-frequency radio flux density and flat spectral index using existing surveys (WENSS, NVSS, VLSS, and MSSS). Approximately one calibrator per square degree, suitable for calibration of $\geq$ 200 km baselines is identified by the detection of compact flux density, for declinations north of 30 degrees and away from the Galactic plane, with a considerably lower density south of this point due to relative difficulty in selecting flat-spectrum candidate sources in this area of the sky. Use of the VLBA calibrator list, together with statistical arguments by comparison with flux densities from lower-resolution catalogues, allow us to establish a rough flux density scale for the LBCS observations, so that LBCS statistics can be used to estimate compact flux densities on scales between 300 mas and 2 arcsec, for sources observed in the survey. The LBCS can be used to assess the structures of point sources in lower-resolution surveys, with significant reductions in the degree of coherence in these sources on scales between 2 arcsec and 300 mas. The LBCS survey sources show a greater incidence of compact flux density in quasars than in radio galaxies, consistent with unified schemes of radio sources. Comparison with samples of sources from interplanetary scintillation (IPS) studies with the Murchison Widefield Array (MWA) shows consistent patterns of detection of compact structure in sources observed both interferometrically with LOFAR and using IPS.
△ Less
Submitted 16 August, 2021;
originally announced August 2021.
-
Sub-arcsecond imaging with the International LOFAR Telescope I. Foundational calibration strategy and pipeline
Authors:
L. K. Morabito,
N. J. Jackson,
S. Mooney,
F. Sweijen,
S. Badole,
P. Kukreti,
D. Venkattu,
C. Groeneveld,
A. Kappes,
E. Bonnassieux,
A. Drabent,
M. Iacobelli,
J. H. Croston,
P. N. Best,
M. Bondi,
J. R. Callingham,
J. E. Conway,
A. T. Deller,
M. J. Hardcastle,
J. P. McKean,
G. K. Miley,
J. Moldon,
H. J. A. Röttgering,
C. Tasse,
T. W. Shimwell
, et al. (49 additional authors not shown)
Abstract:
[abridged] The International LOFAR Telescope is an interferometer with stations spread across Europe. With baselines of up to ~2,000 km, LOFAR has the unique capability of achieving sub-arcsecond resolution at frequencies below 200 MHz, although this is technically and logistically challenging. Here we present a calibration strategy that builds on previous high-resolution work with LOFAR. We give…
▽ More
[abridged] The International LOFAR Telescope is an interferometer with stations spread across Europe. With baselines of up to ~2,000 km, LOFAR has the unique capability of achieving sub-arcsecond resolution at frequencies below 200 MHz, although this is technically and logistically challenging. Here we present a calibration strategy that builds on previous high-resolution work with LOFAR. We give an overview of the calibration strategy and discuss the special challenges inherent to enacting high-resolution imaging with LOFAR, and describe the pipeline, which is publicly available, in detail. We demonstrate the calibration strategy by using the pipeline on P205+55, a typical LOFAR Two-metre Sky Survey (LoTSS) pointing. We perform in-field delay calibration, solution referencing to other calibrators, self-calibration, and imaging of example directions of interest in the field. For this specific field and these ionospheric conditions, dispersive delay solutions can be transferred between calibrators up to ~1.5 degrees away, while phase solution transferral works well over 1 degree. We demonstrate a check of the astrometry and flux density scale. Imaging in 17 directions, the restoring beam is typically 0.3" x 0.2" although this varies slightly over the entire 5 square degree field of view. We achieve ~80 to 300 $μ$Jy/bm image rms noise, which is dependent on the distance from the phase centre; typical values are ~90 $μ$Jy/bm for the 8 hour observation with 48 MHz of bandwidth. Seventy percent of processed sources are detected, and from this we estimate that we should be able to image ~900 sources per LoTSS pointing. This equates to ~3 million sources in the northern sky, which LoTSS will entirely cover in the next several years. Future optimisation of the calibration strategy for efficient post-processing of LoTSS at high resolution (LoTSS-HR) makes this estimate a lower limit.
△ Less
Submitted 16 August, 2021;
originally announced August 2021.
-
A search for radio emission from double-neutron star merger GW190425 using Apertif
Authors:
Olivér Boersma,
Joeri van Leeuwen,
Elizabeth A. K. Adams,
Björn Adebahr,
Alexander Kutkin,
Tom Oosterloo,
W. J. G. de Blok,
R. van den Brink,
A. H. W. M. Coolen,
L. Connor,
S. Damstra,
H. Dénes,
K. M. Hess,
J. M. van der Hulst,
B. Hut,
M. Ivashina,
G. M. Loose,
D. M. Lucero,
Y. Maan,
Á. Mika,
V. A. Moss,
H. Mulder,
L. C. Oostrum,
M. Ruiter,
D. van der Schuur
, et al. (4 additional authors not shown)
Abstract:
Detection of the electromagnetic emission from coalescing binary neutron stars (BNS) is important for understanding the merger and afterglow. We present a search for a radio counterpart to the gravitational-wave source GW190425, a BNS merger, using Apertif on the Westerbork Synthesis Radio Telescope (WSRT). We observe a field of high probability in the associated localisation region for 3 epochs a…
▽ More
Detection of the electromagnetic emission from coalescing binary neutron stars (BNS) is important for understanding the merger and afterglow. We present a search for a radio counterpart to the gravitational-wave source GW190425, a BNS merger, using Apertif on the Westerbork Synthesis Radio Telescope (WSRT). We observe a field of high probability in the associated localisation region for 3 epochs at 68, 90 and 109 days post merger. We identify all sources that exhibit flux variations consistent with the expected afterglow emission of GW190425. We also look for possible transients. These are sources which are only present in one epoch. In addition, we quantify our ability to search for radio afterglows in fourth and future observing runs of the gravitational-wave detector network using Monte Carlo simulations. We found 25 afterglow candidates based on their variability. None of these could be associated with a possible host galaxy at the luminosity distance of GW190425. We also found 55 transient afterglow candidates that were only detected in one epoch. All turned out to be image artefacts. In the fourth observing run, we predict that up to three afterglows will be detectable by Apertif. While we did not find a source related to the afterglow emission of GW190425, the search validates our methods for future searches of radio afterglows.
△ Less
Submitted 9 April, 2021;
originally announced April 2021.
-
Apertif view of the OH Megamaser IRAS 10597+5926: OH 18 cm satellite lines in wide-area HI surveys
Authors:
Kelley M. Hess,
H. Roberts,
H. Dénes,
B. Adebahr,
J. Darling,
E. A. K. Adams,
W. J. G. de Blok,
A. Kutkin,
D. M. Lucero,
Raffaella Morganti,
V. A. Moss,
T. A. Oosterloo,
R. Schulz,
J. M. van der Hulst,
A. H. W. M. Coolen,
S. Damstra,
M. Ivashina,
G. Marcel Loose,
Yogesh Maan,
Á. Mika,
H. Mulder,
M. J. Norden,
L. C. Oostrum,
M. Ruiter,
Joeri van Leeuwen
, et al. (4 additional authors not shown)
Abstract:
We present the serendipitous detection of the two main OH maser lines at 1667 and 1665 MHz associated with IRAS 10597+5926 at z = 0.19612 in the untargeted Apertif Wide-area Extragalactic Survey (AWES), and the subsequent measurement of the OH 1612 MHz satellite line in the same source. With a total OH luminosity of log(L/L_Sun) = 3.90 +/- 0.03, IRAS 10597+5926 is the fourth brightest OH megamaser…
▽ More
We present the serendipitous detection of the two main OH maser lines at 1667 and 1665 MHz associated with IRAS 10597+5926 at z = 0.19612 in the untargeted Apertif Wide-area Extragalactic Survey (AWES), and the subsequent measurement of the OH 1612 MHz satellite line in the same source. With a total OH luminosity of log(L/L_Sun) = 3.90 +/- 0.03, IRAS 10597+5926 is the fourth brightest OH megamaser (OHM) known. We measure a lower limit for the 1667/1612 ratio of R_1612 > 45.9 which is the highest limiting ratio measured for the 1612 MHz OH satellite line to date. OH satellite line measurements provide a potentially valuable constraint by which to compare detailed models of OH maser pum** mechanisms. Optical imaging shows the galaxy is likely a late-stage merger. Based on published infrared and far ultraviolet fluxes, we find that the galaxy is an ultra luminous infrared galaxy (ULIRG) with log(L_TIR/L_Sun) = 12.24, undergoing a star burst with an estimated star formation rate of 179 +/- 40 M_Sun/yr. These host galaxy properties are consistent with the physical conditions responsible for very bright OHM emission. Finally, we provide an update on the predicted number of OH masers that may be found in AWES, and estimate the total number of OH masers that will be detected in each of the individual main and satellite OH 18 cm lines.
△ Less
Submitted 14 January, 2021;
originally announced January 2021.
-
Chromatic periodic activity down to 120 MHz in a Fast Radio Burst
Authors:
Inés Pastor-Marazuela,
Liam Connor,
Joeri van Leeuwen,
Yogesh Maan,
Sander ter Veen,
Anna Bilous,
Leon Oostrum,
Emily Petroff,
Samayra Straal,
Dany Vohl,
Jisk Attema,
Oliver M. Boersma,
Eric Kooistra,
Daniel van der Schuur,
Alessio Sclocco,
Roy Smits,
Elizabeth A. K. Adams,
Björn Adebahr,
Willem J. G. de Blok,
Arthur H. W. M. Coolen,
Sieds Damstra,
Helga Dénes,
Kelley M. Hess,
Thijs van der Hulst,
Boudewijn Hut
, et al. (12 additional authors not shown)
Abstract:
Fast radio bursts (FRBs) are extragalactic astrophysical transients whose brightness requires emitters that are highly energetic, yet compact enough to produce the short, millisecond-duration bursts. FRBs have thus far been detected between 300 MHz and 8 GHz, but lower-frequency emission has remained elusive. A subset of FRBs is known to repeat, and one of those sources, FRB 20180916B, does so wit…
▽ More
Fast radio bursts (FRBs) are extragalactic astrophysical transients whose brightness requires emitters that are highly energetic, yet compact enough to produce the short, millisecond-duration bursts. FRBs have thus far been detected between 300 MHz and 8 GHz, but lower-frequency emission has remained elusive. A subset of FRBs is known to repeat, and one of those sources, FRB 20180916B, does so with a 16.3 day activity period. Using simultaneous Apertif and LOFAR data, we show that FRB 20180916B emits down to 120 MHz, and that its activity window is both narrower and earlier at higher frequencies. Binary wind interaction models predict a narrower periodic activity window at lower frequencies, which is the opposite of our observations. Our detections establish that low-frequency FRB emission can escape the local medium. For bursts of the same fluence, FRB 20180916B is more active below 200 MHz than at 1.4 GHz. Combining our results with previous upper-limits on the all-sky FRB rate at 150 MHz, we find that there are 3-450 FRBs/sky/day above 50 Jy ms at 90% confidence. We are able to rule out the scenario in which companion winds cause FRB periodicity. We also demonstrate that some FRBs live in clean environments that do not absorb or scatter low-frequency radiation.
△ Less
Submitted 15 December, 2020;
originally announced December 2020.
-
The best of both worlds: Combining LOFAR and Apertif to derive resolved radio spectral index images
Authors:
R. Morganti,
T. A. Oosterloo,
M. Brienza,
N. Jurlin,
I. Prandoni,
E. Orru',
S. S. Shabala,
E. A. K. Adams,
B. Adebahr,
P. N. Best,
A. H. W. M. Coolen,
S. Damstra,
W. J. G. de Blok,
F. de Gasperin,
H. Denes,
M. Hardcastle,
K. M. Hess,
B. Hut,
R. Kondapally,
A. M. Kutkin,
G. M. Loose,
D. M. Lucero,
Y. Maan,
F. M. Maccagni,
B. Mingo
, et al. (14 additional authors not shown)
Abstract:
Supermassive black holes at the centres of galaxies can cycle through periods of activity and quiescence. Characterising the duty cycle of active galactic nuclei is crucial for understanding the impact of the energy they release on the host galaxy. For radio AGN, this can be done by identifying dying (remnant) and restarted radio galaxies from their radio spectral properties. Using the combination…
▽ More
Supermassive black holes at the centres of galaxies can cycle through periods of activity and quiescence. Characterising the duty cycle of active galactic nuclei is crucial for understanding the impact of the energy they release on the host galaxy. For radio AGN, this can be done by identifying dying (remnant) and restarted radio galaxies from their radio spectral properties. Using the combination of images at 1400 MHz produced by Apertif, the new phased-array feed receiver installed on the Westerbork Synthesis Radio Telescope, and images at 150 MHz provided by LOFAR, we have derived resolved spectral index images (at a resolution of ~15 arcsec) for all the sources within ~6 deg^2 area of the Lockman Hole region. We were able to select 15 extended radio sources with emission (partly or entirely) characterised by extremely steep spectral indices (steeper than 1.2). These objects represent radio sources in the remnant or the restarted phases of their life cycle. Our findings suggest this cycle to be relatively fast. They also show a variety of properties relevant for modelling the evolution of radio galaxies. For example, the restarted activity can occur while the remnant structure from a previous phase of activity is still visible. This provides constraints on the duration of the 'off' (dying) phase. In extended remnants with ultra-steep spectra at low frequencies, the activity likely stopped a few hundred megayears ago, and they correspond to the older tail of the age distribution of radio galaxies, in agreement with simulations of radio source evolution. We find remnant radio sources with a variety of structures (from double-lobed to amorphous), suggesting different types of progenitors. The present work sets the stage for exploiting low-frequency spectral index studies of extended sources by taking advantage of the large areas common to the LOFAR and the Apertif surveys.
△ Less
Submitted 16 November, 2020;
originally announced November 2020.
-
Extreme intra-hour variability of the radio source J1402+5347 discovered with Apertif
Authors:
T. A. Oosterloo,
H. K. Vedantham,
A. M. Kutkin,
E. A. K. Adams,
B. Adebahr,
A. H. W. M. Coolen,
S. Damstra,
W. J. G. de Blok,
H. De'nes,
K. M. Hess,
B. Hut,
G. M. Loose,
D. M. Lucero,
Y. Maan,
R. Morganti,
V. A. Moss,
H. Mulder,
M. J. Norden,
A. R. Offringa,
L. C. Oostrum,
E. Orru`,
M. Ruiter,
R. Schulz,
R. H. van den Brink,
J. M. van der Hulst
, et al. (5 additional authors not shown)
Abstract:
The propagation of radio waves from distant compact radio sources through turbulent interstellar plasma in our Galaxy causes these sources to twinkle, a phenomenon called interstellar scintillation. Such scintillations are a unique probe of the micro-arcsecond structure of radio sources as well as of the sub-AU-scale structure of the Galactic interstellar medium. Weak scintillations (i.e. an inten…
▽ More
The propagation of radio waves from distant compact radio sources through turbulent interstellar plasma in our Galaxy causes these sources to twinkle, a phenomenon called interstellar scintillation. Such scintillations are a unique probe of the micro-arcsecond structure of radio sources as well as of the sub-AU-scale structure of the Galactic interstellar medium. Weak scintillations (i.e. an intensity modulation of a few percent) on timescales of a few days or longer are commonly seen at centimetre wavelengths and are thought to result from the line-of-sight integrated turbulence in the interstellar plasma of the Milky Way. So far, only three sources were known that show more extreme variations, with modulations at the level of some dozen percent on timescales shorter than an hour. This requires propagation through nearby (d <~10 pc) anomalously dense (n_e ~10^2 cm^-3) plasma clouds. Here we report the discovery with Apertif of a source (J1402+5347) showing extreme (~50%) and rapid variations on a timescale of just 6.5 minutes in the decimetre band (1.4 GHz). The spatial scintillation pattern is highly anisotropic, with a semi-minor axis of about 20,000 km. The canonical theory of refractive scintillation constrains the scattering plasma to be within the Oort cloud. The sightline to J1402+5347, however, passes unusually close to the B3 star Alkaid (eta UMa) at a distance of 32 pc. If the scintillations are associated with Alkaid, then the angular size of J1402+5347 along the minor axis of the scintels must be smaller than ~10 micro arcsec yielding an apparent brightness temperature for an isotropic source of >~ 10^ 14K. }
△ Less
Submitted 18 August, 2020;
originally announced August 2020.
-
A LOFAR Observation of Ionospheric Scintillation from Two Simultaneous Travelling Ionospheric Disturbances
Authors:
Richard A. Fallows,
Biagio Forte,
Ivan Astin,
Tom Allbrook,
Alex Arnold,
Alan Wood,
Gareth Dorrian,
Maaijke Mevius,
Hanna Rothkaehl,
Barbara Matyjasiak,
Andrzej Krankowski,
James M. Anderson,
Ashish Asgekar,
I. Max Avruch,
Mark Bentum,
Mario M. Bisi,
Harvey R. Butcher,
Benedetta Ciardi,
Bartosz Dabrowski,
Sieds Damstra,
Francesco de Gasperin,
Sven Duscha,
Jochen Eislöffel,
Thomas M. O. Franzen,
Michael A. Garrett
, et al. (33 additional authors not shown)
Abstract:
This paper presents the results from one of the first observations of ionospheric scintillation taken using the Low-Frequency Array (LOFAR). The observation was of the strong natural radio source Cas A, taken overnight on 18-19 August 2013, and exhibited moderately strong scattering effects in dynamic spectra of intensity received across an observing bandwidth of 10-80MHz. Delay-Doppler spectra (t…
▽ More
This paper presents the results from one of the first observations of ionospheric scintillation taken using the Low-Frequency Array (LOFAR). The observation was of the strong natural radio source Cas A, taken overnight on 18-19 August 2013, and exhibited moderately strong scattering effects in dynamic spectra of intensity received across an observing bandwidth of 10-80MHz. Delay-Doppler spectra (the 2-D FFT of the dynamic spectrum) from the first hour of observation showed two discrete parabolic arcs, one with a steep curvature and the other shallow, which can be used to provide estimates of the distance to, and velocity of, the scattering plasma. A cross-correlation analysis of data received by the dense array of stations in the LOFAR "core" reveals two different velocities in the scintillation pattern: a primary velocity of ~30m/s with a north-west to south-east direction, associated with the steep parabolic arc and a scattering altitude in the F-region or higher, and a secondary velocity of ~110m/s with a north-east to south-west direction, associated with the shallow arc and a scattering altitude in the D-region. Geomagnetic activity was low in the mid-latitudes at the time, but a weak sub-storm at high latitudes reached its peak at the start of the observation. An analysis of Global Navigation Satellite Systems (GNSS) and ionosonde data from the time reveals a larger-scale travelling ionospheric disturbance (TID), possibly the result of the high-latitude activity, travelling in the north-west to south-east direction, and, simultaneously, a smaller--scale TID travelling in a north-east to south-west direction, which could be associated with atmospheric gravity wave activity. The LOFAR observation shows scattering from both TIDs, at different altitudes and propagating in different directions. To the best of our knowledge this is the first time that such a phenomenon has been reported.
△ Less
Submitted 9 March, 2020;
originally announced March 2020.
-
A bright, high rotation-measure FRB that skewers the M33 halo
Authors:
Liam Connor,
Joeri van Leeuwen,
L. C. Oostrum,
E. Petroff,
Yogesh Maan,
E. A. K. Adams,
J. J. Attema,
J. E. Bast,
O. M. Boersma,
H. Dénes,
D. W. Gardenier,
J. E. Hargreaves,
E. Kooistra,
I. Pastor-Marazuela,
R. Schulz,
A. Sclocco,
R. Smits,
S. M. Straal,
D. van der Schuur,
Dany Vohl,
B. Adebahr,
W. J. G. de Blok,
W. A. van Cappellen,
A. H. W. M. Coolen,
S. Damstra
, et al. (15 additional authors not shown)
Abstract:
We report the detection of a bright fast radio burst, FRB\,191108, with Apertif on the Westerbork Synthesis Radio Telescope (WSRT). The interferometer allows us to localise the FRB to a narrow $5\arcsec\times7\arcmin$ ellipse by employing both multibeam information within the Apertif phased-array feed (PAF) beam pattern, and across different tied-array beams. The resulting sight line passes close…
▽ More
We report the detection of a bright fast radio burst, FRB\,191108, with Apertif on the Westerbork Synthesis Radio Telescope (WSRT). The interferometer allows us to localise the FRB to a narrow $5\arcsec\times7\arcmin$ ellipse by employing both multibeam information within the Apertif phased-array feed (PAF) beam pattern, and across different tied-array beams. The resulting sight line passes close to Local Group galaxy M33, with an impact parameter of only 18\,kpc with respect to the core. It also traverses the much larger circumgalactic medium of M31, the Andromeda Galaxy. We find that the shared plasma of the Local Group galaxies could contribute $\sim$10\% of its dispersion measure of 588\,pc\,cm$^{-3}$. FRB\,191108 has a Faraday rotation measure of +474\,$\pm\,3$\,rad\,m$^{-2}$, which is too large to be explained by either the Milky Way or the intergalactic medium. Based on the more moderate RMs of other extragalactic sources that traverse the halo of M33, we conclude that the dense magnetised plasma resides in the host galaxy. The FRB exhibits frequency structure on two scales, one that is consistent with quenched Galactic scintillation and broader spectral structure with $Δν\approx40$\,MHz. If the latter is due to scattering in the shared M33/M31 CGM, our results constrain the Local Group plasma environment. We found no accompanying persistent radio sources in the Apertif imaging survey data.
△ Less
Submitted 22 September, 2020; v1 submitted 4 February, 2020;
originally announced February 2020.
-
Repeating fast radio bursts with WSRT/Apertif
Authors:
L. C. Oostrum,
Y. Maan,
J. van Leeuwen,
L. Connor,
E. Petroff,
J. J. Attema,
J. E. Bast,
D. W. Gardenier,
J. E. Hargreaves,
E. Kooistra,
D. van der Schuur,
A. Sclocco,
R. Smits,
S. M. Straal,
S. ter Veen,
D. Vohl,
E. A. K. Adams,
B. Adebahr,
W. J. G. de Blok,
R. H. van den Brink,
W. A. van Cappellen,
A. H. W. M. Coolen,
S. Damstra,
G. N. J. van Diepen,
B. S. Frank
, et al. (18 additional authors not shown)
Abstract:
Repeating fast radio bursts (FRBs) present excellent opportunities to identify FRB progenitors and host environments, as well as decipher the underlying emission mechanism. Detailed studies of repeating FRBs might also hold clues to the origin of FRBs as a population. We aim to detect the first two repeating FRBs: FRB 121102 (R1) and FRB 180814.J0422+73 (R2), and characterise their repeat statisti…
▽ More
Repeating fast radio bursts (FRBs) present excellent opportunities to identify FRB progenitors and host environments, as well as decipher the underlying emission mechanism. Detailed studies of repeating FRBs might also hold clues to the origin of FRBs as a population. We aim to detect the first two repeating FRBs: FRB 121102 (R1) and FRB 180814.J0422+73 (R2), and characterise their repeat statistics. We also want to significantly improve the sky localisation of R2. We use the Westerbork Synthesis Radio Telescope to conduct extensive follow-up of these two repeating FRBs. The new phased-array feed system, Apertif, allows covering the entire sky position uncertainty of R2 with fine spatial resolution in one pointing. We characterise the energy distribution and the clustering of detected R1 bursts. We detected 30 bursts from R1. Our measurements indicate a dispersion measure of 563.5(2) pc cm$^{-3}$, suggesting a significant increase in DM over the past few years. We place an upper limit of 8% on the linear polarisation fraction of the brightest burst. We did not detect any bursts from R2. A single power-law might not fit the R1 burst energy distribution across the full energy range or widely separated detections. Our observations provide improved constraints on the clustering of R1 bursts. Our stringent upper limits on the linear polarisation fraction imply a significant depolarisation, either intrinsic to the emission mechanism or caused by the intervening medium, at 1400 MHz that is not observed at higher frequencies. The non-detection of any bursts from R2 implies either a highly clustered nature of the bursts, a steep spectral index, or a combination of both. Alternatively, R2 has turned off completely, either permanently or for an extended period of time.
△ Less
Submitted 28 January, 2020; v1 submitted 27 December, 2019;
originally announced December 2019.
-
LOFAR: The LOw-Frequency ARray
Authors:
M. P. van Haarlem,
M. W. Wise,
A. W. Gunst,
G. Heald,
J. P. McKean,
J. W. T. Hessels,
A. G. de Bruyn,
R. Nijboer,
J. Swinbank,
R. Fallows,
M. Brentjens,
A. Nelles,
R. Beck,
H. Falcke,
R. Fender,
J. Hörandel,
L. V. E. Koopmans,
G. Mann,
G. Miley,
H. Röttgering,
B. W. Stappers,
R. A. M. J. Wijers,
S. Zaroubi,
M. van den Akker,
A. Alexov
, et al. (175 additional authors not shown)
Abstract:
LOFAR, the LOw-Frequency ARray, is a new-generation radio interferometer constructed in the north of the Netherlands and across europe. Utilizing a novel phased-array design, LOFAR covers the largely unexplored low-frequency range from 10-240 MHz and provides a number of unique observing capabilities. Spreading out from a core located near the village of Exloo in the northeast of the Netherlands,…
▽ More
LOFAR, the LOw-Frequency ARray, is a new-generation radio interferometer constructed in the north of the Netherlands and across europe. Utilizing a novel phased-array design, LOFAR covers the largely unexplored low-frequency range from 10-240 MHz and provides a number of unique observing capabilities. Spreading out from a core located near the village of Exloo in the northeast of the Netherlands, a total of 40 LOFAR stations are nearing completion. A further five stations have been deployed throughout Germany, and one station has been built in each of France, Sweden, and the UK. Digital beam-forming techniques make the LOFAR system agile and allow for rapid repointing of the telescope as well as the potential for multiple simultaneous observations. With its dense core array and long interferometric baselines, LOFAR achieves unparalleled sensitivity and angular resolution in the low-frequency radio regime. The LOFAR facilities are jointly operated by the International LOFAR Telescope (ILT) foundation, as an observatory open to the global astronomical community. LOFAR is one of the first radio observatories to feature automated processing pipelines to deliver fully calibrated science products to its user community. LOFAR's new capabilities, techniques and modus operandi make it an important pathfinder for the Square Kilometre Array (SKA). We give an overview of the LOFAR instrument, its major hardware and software components, and the core science objectives that have driven its design. In addition, we present a selection of new results from the commissioning phase of this new radio observatory.
△ Less
Submitted 19 May, 2013; v1 submitted 15 May, 2013;
originally announced May 2013.
-
Optimized Trigger for Ultra-High-Energy Cosmic-Ray and Neutrino Observations with the Low Frequency Radio Array
Authors:
K. Singh,
M. Mevius,
O. Scholten,
J. M. Anderson,
A. van Ardenne,
M. Arts,
M. Avruch,
A. Asgekar,
M. Bell,
P. Bennema,
M. Bentum,
G. Bernadi,
P. Best,
A. -J. Boonstra,
J. Bregman,
R. van de Brink,
C. Broekema,
W. Brouw,
M. Brueggen,
S. Buitink,
H. Butcher,
W. van Cappellen,
B. Ciardi,
A. Coolen,
S. Damstra
, et al. (78 additional authors not shown)
Abstract:
When an ultra-high energy neutrino or cosmic ray strikes the Lunar surface a radio-frequency pulse is emitted. We plan to use the LOFAR radio telescope to detect these pulses. In this work we propose an efficient trigger implementation for LOFAR optimized for the observation of short radio pulses.
When an ultra-high energy neutrino or cosmic ray strikes the Lunar surface a radio-frequency pulse is emitted. We plan to use the LOFAR radio telescope to detect these pulses. In this work we propose an efficient trigger implementation for LOFAR optimized for the observation of short radio pulses.
△ Less
Submitted 29 August, 2011;
originally announced August 2011.
-
THACO, a Test Facility for Characterizing the Noise Performance of Active Antenna Arrays
Authors:
E. E. M. Woestenburg,
L. Bakker,
M. Ruiter,
M. V. Ivashina,
R. H. Witvers
Abstract:
This paper discusses an outdoor test facility for the noise characterization of active antenna arrays, using measurement results of array noise temperatures in the order of 50 K for a number of small aperture arrays. The measurement results are obtained by a Y-factor method with hot and a cold noise sources, with an absorber at room temperature as the hot load and the cold sky as the cold load. Th…
▽ More
This paper discusses an outdoor test facility for the noise characterization of active antenna arrays, using measurement results of array noise temperatures in the order of 50 K for a number of small aperture arrays. The measurement results are obtained by a Y-factor method with hot and a cold noise sources, with an absorber at room temperature as the hot load and the cold sky as the cold load. The effect of shielding the arrays by the test facility, with respect to noise and RFI from the environment, will also be discussed.
△ Less
Submitted 13 October, 2011; v1 submitted 27 August, 2011;
originally announced August 2011.
